Home/Catalog/BIANCA-X8000-MIBSYS-MIB

BIANCA-X8000-MIBSYS-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

AI MIB Summary

Standard SNMP MIB module defining data structures for BIANCA-X8000-MIBSYS-MIB.

Objects

Active

Status

Dependencies

Imported Objects

Objects

33 total

Object Name	Syntax	OID
bintec OBJECT IDENTIFIER `.1.3.6.1.4.1.272`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.272`
RFC-1215 Unknown `.1.3.6.1.4.1.272`	Unknown	`.1.3.6.1.4.1.272`
bibo OBJECT IDENTIFIER `.1.3.6.1.4.1.272.4`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.272.4`
sys OBJECT IDENTIFIER `.1.3.6.1.4.1.272.4.17`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.272.4.17`
x8 OBJECT IDENTIFIER `.1.3.6.1.4.1.272.4.17.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.272.4.17.3`
sysX8Config OBJECT IDENTIFIER `.1.3.6.1.4.1.272.4.17.3.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.272.4.17.3.1`
sysX8ConfigPowerSupply1StateThis variable shows the state of the power supply.ro Enumeration `.1.3.6.1.4.1.272.4.17.3.1.1`	Enumeration	`.1.3.6.1.4.1.272.4.17.3.1.1`
sysX8ConfigPowerSupply1TempThis variable shows the actual power supply temperature in the unit Celsius.ro INTEGER `.1.3.6.1.4.1.272.4.17.3.1.2`	INTEGER	`.1.3.6.1.4.1.272.4.17.3.1.2`
sysX8ConfigPowerSupply1TempAlarmThresholdPower supply 1 temperature threshold.rw INTEGER `.1.3.6.1.4.1.272.4.17.3.1.3`	INTEGER	`.1.3.6.1.4.1.272.4.17.3.1.3`
sysX8ConfigPowerSupply1TempAlarmTrapIf the power supply temperature raises above the threshold, a alarm trap is generated every 60 seconds.ro Enumeration `.1.3.6.1.4.1.272.4.17.3.1.4`	Enumeration	`.1.3.6.1.4.1.272.4.17.3.1.4`
sysX8ConfigPowerSupply2StateThis variable show the the state of the power supply.ro Enumeration `.1.3.6.1.4.1.272.4.17.3.1.5`	Enumeration	`.1.3.6.1.4.1.272.4.17.3.1.5`
sysX8ConfigPowerSupply2TempThis variable shows the actual power supply temperature in the unit Celsius.ro INTEGER `.1.3.6.1.4.1.272.4.17.3.1.6`	INTEGER	`.1.3.6.1.4.1.272.4.17.3.1.6`
sysX8ConfigPowerSupply2TempAlarmThresholdPower supply 2 temperature threshold.rw INTEGER `.1.3.6.1.4.1.272.4.17.3.1.7`	INTEGER	`.1.3.6.1.4.1.272.4.17.3.1.7`
sysX8ConfigPowerSupply2TempAlarmTrapIf the power supply temperature raises above the threshold, a alarm trap is generated every 60 seconds.ro Enumeration `.1.3.6.1.4.1.272.4.17.3.1.8`	Enumeration	`.1.3.6.1.4.1.272.4.17.3.1.8`
sysX8ConfigFanControlThis variable defines automatic fan control. In mode 'auto' the fans are automatically adjusted depending on the current temperature. In mode 'high' all fans remain at maximum speed.rw Enumeration `.1.3.6.1.4.1.272.4.17.3.1.9`	Enumeration	`.1.3.6.1.4.1.272.4.17.3.1.9`
sysX8ConfigFanVersionThis variable shows the firmware version of the fan unit.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.272.4.17.3.1.10`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.272.4.17.3.1.10`
sysX8ConfigFan1This variable shows the current turning speed.ro INTEGER `.1.3.6.1.4.1.272.4.17.3.1.11`	INTEGER	`.1.3.6.1.4.1.272.4.17.3.1.11`
sysX8ConfigFan2This variable shows the current turning speed.ro INTEGER `.1.3.6.1.4.1.272.4.17.3.1.12`	INTEGER	`.1.3.6.1.4.1.272.4.17.3.1.12`
sysX8ConfigFan3This variable shows the current turning speed.ro INTEGER `.1.3.6.1.4.1.272.4.17.3.1.13`	INTEGER	`.1.3.6.1.4.1.272.4.17.3.1.13`
sysX8ConfigFan4This variable shows the current turning speed.ro INTEGER `.1.3.6.1.4.1.272.4.17.3.1.14`	INTEGER	`.1.3.6.1.4.1.272.4.17.3.1.14`
sysX8Traps OBJECT IDENTIFIER `.1.3.6.1.4.1.272.4.17.3.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.272.4.17.3.2`
sysX8TrapPowerSupply1MissingThis trap signifies that the power supply 1 has been removed TRAP-TYPE `.1.3.6.1.4.1.272.4.17.3.2.0.1`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.3.2.0.1`
sysX8TrapPowerSupply1PowerOffThis trap signifies that the power supply 1 has no power-good signal (no power input) TRAP-TYPE `.1.3.6.1.4.1.272.4.17.3.2.0.2`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.3.2.0.2`
sysX8TrapPowerSupply1PowerFailThis trap signifies that the power supply 1 has been in the failure (bad DC output) TRAP-TYPE `.1.3.6.1.4.1.272.4.17.3.2.0.3`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.3.2.0.3`
sysX8TrapPowerSupply1PowerGoodThis trap signifies that the power supply 1 is running (supplying power) TRAP-TYPE `.1.3.6.1.4.1.272.4.17.3.2.0.4`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.3.2.0.4`
sysX8TrapPowerSupply1TempCriticalThis trap signifies that the power supply 1 temperature raises above the critical alarm-threshold TRAP-TYPE `.1.3.6.1.4.1.272.4.17.3.2.0.5`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.3.2.0.5`
sysX8TrapPowerSupply1TempOkA normal power supply 1 temperature has been restored. TRAP-TYPE `.1.3.6.1.4.1.272.4.17.3.2.0.6`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.3.2.0.6`
sysX8TrapPowerSupply2MissingThis trap signifies that the power supply 2 has been removed TRAP-TYPE `.1.3.6.1.4.1.272.4.17.3.2.0.7`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.3.2.0.7`
sysX8TrapPowerSupply2PowerOffThis trap signifies that the power supply 2 has no power-good signal (no power input) TRAP-TYPE `.1.3.6.1.4.1.272.4.17.3.2.0.8`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.3.2.0.8`
sysX8TrapPowerSupply2PowerFailThis trap signifies that the power supply 2 has been in the failure (bad DC output) TRAP-TYPE `.1.3.6.1.4.1.272.4.17.3.2.0.9`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.3.2.0.9`
sysX8TrapPowerSupply2PowerGoodThis trap signifies that the power supply 2 is running (supplying power) TRAP-TYPE `.1.3.6.1.4.1.272.4.17.3.2.0.10`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.3.2.0.10`
sysX8TrapPowerSupply2TempCriticalThis trap signifies that the power supply 2 temperature raises above the critical alarm-threshold TRAP-TYPE `.1.3.6.1.4.1.272.4.17.3.2.0.11`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.3.2.0.11`
sysX8TrapPowerSupply2TempOkA normal power supply 2 temperature has been restored. TRAP-TYPE `.1.3.6.1.4.1.272.4.17.3.2.0.12`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.3.2.0.12`