Home/Catalog/BIANCA-X4000-MIBSYS-MIB

BIANCA-X4000-MIBSYS-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

AI MIB Summary

Standard SNMP MIB module defining data structures for BIANCA-X4000-MIBSYS-MIB.

Objects

Active

Status

Dependencies

Imported Objects

Objects

35 total

Object Name	Syntax	OID
org OBJECT IDENTIFIER `.1.3`	OBJECT IDENTIFIER	`.1.3`
RFC1155-SMI Unknown `.1.3`	Unknown	`.1.3`
dod OBJECT IDENTIFIER `.1.3.6`	OBJECT IDENTIFIER	`.1.3.6`
internet OBJECT IDENTIFIER `.1.3.6.1`	OBJECT IDENTIFIER	`.1.3.6.1`
private OBJECT IDENTIFIER `.1.3.6.1.4`	OBJECT IDENTIFIER	`.1.3.6.1.4`
enterprises OBJECT IDENTIFIER `.1.3.6.1.4.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1`
bintec OBJECT IDENTIFIER `.1.3.6.1.4.1.272`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.272`
bibo OBJECT IDENTIFIER `.1.3.6.1.4.1.272.4`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.272.4`
sys OBJECT IDENTIFIER `.1.3.6.1.4.1.272.4.17`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.272.4.17`
x4 OBJECT IDENTIFIER `.1.3.6.1.4.1.272.4.17.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.272.4.17.2`
sysX4Config OBJECT IDENTIFIER `.1.3.6.1.4.1.272.4.17.2.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.272.4.17.2.1`
sysX4ConfigLcdBrightnessThis variable allows to control the brightness of the LCD display. Lower values mean less, higher values mean more brightness. Zero means no brightness.rw INTEGER `.1.3.6.1.4.1.272.4.17.2.1.1`	INTEGER	`.1.3.6.1.4.1.272.4.17.2.1.1`
sysX4ConfigLcdContrastThis variable allows to control the contrast of the LCD display. Lower values mean less, higher values mean more contrast. Zero means factory settings.rw INTEGER `.1.3.6.1.4.1.272.4.17.2.1.2`	INTEGER	`.1.3.6.1.4.1.272.4.17.2.1.2`
sysX4ConfigLcdConfigureThis variable determines whether it is possible to configure the brick by using the LCD display and the buttons.rw Enumeration `.1.3.6.1.4.1.272.4.17.2.1.3`	Enumeration	`.1.3.6.1.4.1.272.4.17.2.1.3`
sysX4ConfigLcdPinThe PIN is the personal identification number that is needed for authorisation for display configurations. It consists solely of digits and must be 4 characters long. Default Value is '0000'.rw DisplayString `.1.3.6.1.4.1.272.4.17.2.1.4`	DisplayString	`.1.3.6.1.4.1.272.4.17.2.1.4`
sysX4ConfigLcdIdleTimerAfter this time the display screen changes to default screen. Default Value is 5. If this value is set to 0, change to defaultscreen is disabledrw INTEGER `.1.3.6.1.4.1.272.4.17.2.1.5`	INTEGER	`.1.3.6.1.4.1.272.4.17.2.1.5`
sysX4ConfigLcdDefaultScreenThis screen will be displayed after the LcdIdleTimer has elapsed. Default Value is MainMenu.rw DisplayString `.1.3.6.1.4.1.272.4.17.2.1.6`	DisplayString	`.1.3.6.1.4.1.272.4.17.2.1.6`
sysX4ConfigLcdLanguageChoose your display language.rw DisplayString `.1.3.6.1.4.1.272.4.17.2.1.7`	DisplayString	`.1.3.6.1.4.1.272.4.17.2.1.7`
sysX4ConfigTempUnitThis variable defines the unit of sysX4Config*Temp, either Celsius or Fahrenheit.ro Enumeration `.1.3.6.1.4.1.272.4.17.2.1.8`	Enumeration	`.1.3.6.1.4.1.272.4.17.2.1.8`
sysX4ConfigMainTempThis variable shows the actual main board temperature measured in the units Fahrenheit or Celsius.ro INTEGER (-1000..1000) `.1.3.6.1.4.1.272.4.17.2.1.9`	INTEGER (-1000..1000)	`.1.3.6.1.4.1.272.4.17.2.1.9`
sysX4ConfigMainTempAlarmThresholdsystem mainboard temperature threshold.rw INTEGER (-1000..1000) `.1.3.6.1.4.1.272.4.17.2.1.10`	INTEGER (-1000..1000)	`.1.3.6.1.4.1.272.4.17.2.1.10`
sysX4ConfigMainTempAlarmTrapIf the system temperature raises above the threshold, a alarm trap is generated every 60 seconds.ro Enumeration `.1.3.6.1.4.1.272.4.17.2.1.11`	Enumeration	`.1.3.6.1.4.1.272.4.17.2.1.11`
sysX4ConfigMod1TempThis variable shows the actual module sensor1 temperature in the units Fahrenheit or Celsius.ro INTEGER (-1000..1000) `.1.3.6.1.4.1.272.4.17.2.1.12`	INTEGER (-1000..1000)	`.1.3.6.1.4.1.272.4.17.2.1.12`
sysX4ConfigMod1TempAlarmThresholdactual module sensor1 temperature threshold.rw INTEGER (-1000..1000) `.1.3.6.1.4.1.272.4.17.2.1.13`	INTEGER (-1000..1000)	`.1.3.6.1.4.1.272.4.17.2.1.13`
sysX4ConfigMod1TempAlarmTrapIf the actual module sensor1 temperature raises above the threshold, a alarm trap is generated every 60 seconds.ro Enumeration `.1.3.6.1.4.1.272.4.17.2.1.14`	Enumeration	`.1.3.6.1.4.1.272.4.17.2.1.14`
sysX4ConfigMod2TempThis variable shows the actual module sensor2 temperature in the units Fahrenheit or Celsius.ro INTEGER (-1000..1000) `.1.3.6.1.4.1.272.4.17.2.1.15`	INTEGER (-1000..1000)	`.1.3.6.1.4.1.272.4.17.2.1.15`
sysX4ConfigMod2TempAlarmThresholdactual module sensor2 temperature threshold.rw INTEGER (-1000..1000) `.1.3.6.1.4.1.272.4.17.2.1.16`	INTEGER (-1000..1000)	`.1.3.6.1.4.1.272.4.17.2.1.16`
sysX4ConfigMod2TempAlarmTrapIf the actual module sensor2 temperature raises above the threshold, a alarm trap is generated every 60 seconds.ro Enumeration `.1.3.6.1.4.1.272.4.17.2.1.17`	Enumeration	`.1.3.6.1.4.1.272.4.17.2.1.17`
sysX4Traps OBJECT IDENTIFIER `.1.3.6.1.4.1.272.4.17.2.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.272.4.17.2.2`
sysX4TrapMainTempCriticalThis trap signifies that the system board temperature raises above the critical alarm-threshold TRAP-TYPE `.1.3.6.1.4.1.272.4.17.2.2.0.1`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.2.2.0.1`
sysX4TrapMainTempOkNormal system board temperature has been restored. TRAP-TYPE `.1.3.6.1.4.1.272.4.17.2.2.0.2`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.2.2.0.2`
sysX4TrapMod1TempCriticalThis trap signifies that the actual module (sensor 1) temperature raises above the critical alarm-threshold TRAP-TYPE `.1.3.6.1.4.1.272.4.17.2.2.0.3`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.2.2.0.3`
sysX4TrapMod1Temp1OkNormal temperature of actual module (sensor 1) has been restored. TRAP-TYPE `.1.3.6.1.4.1.272.4.17.2.2.0.4`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.2.2.0.4`
sysX4TrapMod2TempCriticalThis trap signifies that the actual module (sensor 2) temperature raises above the critical alarm-threshold TRAP-TYPE `.1.3.6.1.4.1.272.4.17.2.2.0.5`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.2.2.0.5`
sysX4TrapMod2TempOkNormal temperature of actual module (sensor 2) has been restored. TRAP-TYPE `.1.3.6.1.4.1.272.4.17.2.2.0.6`	TRAP-TYPE	`.1.3.6.1.4.1.272.4.17.2.2.0.6`