BIANCA-BRICK-TAF-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for BIANCA-BRICK-TAF-MIB.
32
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
32 total| Object Name |
|---|
org OBJECT IDENTIFIER .1.3 |
RFC1155-SMI Unknown .1.3 |
dod OBJECT IDENTIFIER .1.3.6 |
internet OBJECT IDENTIFIER .1.3.6.1 |
private OBJECT IDENTIFIER .1.3.6.1.4 |
enterprises OBJECT IDENTIFIER .1.3.6.1.4.1 |
bintec OBJECT IDENTIFIER .1.3.6.1.4.1.272 |
bibo OBJECT IDENTIFIER .1.3.6.1.4.1.272.4 |
biboip OBJECT IDENTIFIER .1.3.6.1.4.1.272.4.5 |
ipTafTableThe ipTafTable contains information about IP partners that
sent packets to an interface that has authentication
enabled. SEQUENCE OF IpTafEntry .1.3.6.1.4.1.272.4.5.17 |
ipTafEntry IpTafEntry .1.3.6.1.4.1.272.4.5.17.1 |
ipTafIfIndexInterface Index.ro INTEGER .1.3.6.1.4.1.272.4.5.17.1.1 |
ipTafAddressIP address of the partnerro IpAddress .1.3.6.1.4.1.272.4.5.17.1.2 |
ipTafStateThis object shows the authentication state of the partner.
Packets are only routed if the state is xfer. If the state
is authenticating a response from an authentication
server is expected. Entries in state idle are deleted
automatically after a timeout.ro Enumeration .1.3.6.1.4.1.272.4.5.17.1.3 |
ipTafAuthTimeTime of the last successful authentication.ro Date .1.3.6.1.4.1.272.4.5.17.1.4 |
ipTafTimeoutThis object gives the number of seconds till the
authentication expires.rw INTEGER .1.3.6.1.4.1.272.4.5.17.1.5 |
bintecsec OBJECT IDENTIFIER .1.3.6.1.4.1.272.254 |
taf OBJECT IDENTIFIER .1.3.6.1.4.1.272.254.9 |
tafServerTableThe tafServerTable contains information about the
servers that are used for the token authentication
firewall. SEQUENCE OF TafServerEntry .1.3.6.1.4.1.272.254.9.1 |
tafServerEntry TafServerEntry .1.3.6.1.4.1.272.254.9.1.1 |
tafServerTypeType of authentication server.rw Enumeration .1.3.6.1.4.1.272.254.9.1.1.1 |
tafServerNodeSecretThe shared secret between TAF server and Brick.rw OCTET STRING .1.3.6.1.4.1.272.254.9.1.1.2 |
tafServerVersionVersion of the protocol between TAF server and Brick.rw INTEGER .1.3.6.1.4.1.272.254.9.1.1.3 |
tafServerRetriesThe number of retries sent for each requestrw INTEGER .1.3.6.1.4.1.272.254.9.1.1.4 |
tafServerTimeoutThe amount of seconds waiting for an
outstanding request.rw INTEGER .1.3.6.1.4.1.272.254.9.1.1.5 |
tafServerEncryptionThe encryption algorithm that is used for the
communication between ACE server and Brickrw Enumeration .1.3.6.1.4.1.272.254.9.1.1.6 |
tafServerAddressThe IP Address of the TAF server .rw IpAddress .1.3.6.1.4.1.272.254.9.1.1.7 |
tafServerPortThe TAF server UDP port.rw INTEGER .1.3.6.1.4.1.272.254.9.1.1.8 |
tafServerClientPortThe TAF client UDP port.rw INTEGER .1.3.6.1.4.1.272.254.9.1.1.9 |
tafServerPriorityThe TAF server with the lowest priority is the first
used for request. Use the value 0 for the master server
and the value 1 for the slave server.rw INTEGER .1.3.6.1.4.1.272.254.9.1.1.10 |
tafServerStateThe entry is ignored, if the value of this field is
`disabled'. Set this field to `delete' to delete
this entryrw Enumeration .1.3.6.1.4.1.272.254.9.1.1.11 |
tafServerCheckInterfacerw Enumeration .1.3.6.1.4.1.272.254.9.1.1.12 |