BIANCA-BRICK-PPPOE-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
43
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
43 total| Object Name |
|---|
org OBJECT IDENTIFIER .1.3 |
SNMPv2-TC Unknown .1.3 |
dod OBJECT IDENTIFIER .1.3.6 |
internet OBJECT IDENTIFIER .1.3.6.1 |
private OBJECT IDENTIFIER .1.3.6.1.4 |
enterprises OBJECT IDENTIFIER .1.3.6.1.4.1 |
bintec OBJECT IDENTIFIER .1.3.6.1.4.1.272 |
bibo OBJECT IDENTIFIER .1.3.6.1.4.1.272.4 |
pppoe OBJECT IDENTIFIER .1.3.6.1.4.1.272.4.24 |
pppoeCallTableThe pppoeCallTable displays all currently active PPPoE
calls (incoming and outgoing). Only the system can add
or remove entries to this table.
Creating entries: Entries are added when an outgoing
call is made or when an incoming call is connected.
Deleting entries: Entries are removed once the
respective call is disconnected. SEQUENCE OF PppoeCallEntry .1.3.6.1.4.1.272.4.24.1 |
pppoeCallEntry PppoeCallEntry .1.3.6.1.4.1.272.4.24.1.1 |
pppoeCallIdDirection of the PPPoE call, incoming(1) or outgoing(2).ro INTEGER .1.3.6.1.4.1.272.4.24.1.1.1 |
pppoeCallDirectionDirection of the PPPoE call, incoming(1) or outgoing(2).ro Enumeration .1.3.6.1.4.1.272.4.24.1.1.2 |
pppoeCallAgeThe age of the call. For outgoing calls, the time since
the call began, or for incoming calls, the time since the
call was received. The format is in hh:mm:ss.00.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.272.4.24.1.1.3 |
pppoeCallStateThe state of the PPPoE discovery stage according RFC 2516.rw Enumeration .1.3.6.1.4.1.272.4.24.1.1.4 |
pppoeCallRemotePhysAddressPeer's Ethernet address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.272.4.24.1.1.5 |
pppoeCallLocalPhysAddressLocal Ethernet Address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.272.4.24.1.1.6 |
pppoeCallAcNameThe PPPoE access concentrator's name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.24.1.1.7 |
pppoeCallServiceThe PPPoE service name, indicating the service the Host is
requesting.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.24.1.1.8 |
pppoeCallReceivedPacketsCount of received valid GRE-encapsulated packets.ro Counter .1.3.6.1.4.1.272.4.24.1.1.9 |
pppoeCallReceivedOctetsCount of received valid Octets.ro Counter .1.3.6.1.4.1.272.4.24.1.1.10 |
pppoeCallReceivedErrorsCount of received invalid GRE-encapsulated packets.ro Counter .1.3.6.1.4.1.272.4.24.1.1.11 |
pppoeCallTransmitPacketsCount of transmitted GRE-encapsulated packets.ro Counter .1.3.6.1.4.1.272.4.24.1.1.12 |
pppoeCallTransmitOctetsCount of transmitted Octets.ro Counter .1.3.6.1.4.1.272.4.24.1.1.13 |
pppoeCallTransmitErrorsCount of transmit errors.ro Counter .1.3.6.1.4.1.272.4.24.1.1.14 |
pppoeCallInfoAdditional information to identify the PPPoE callro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.24.1.1.15 |
pppoeCreditsTableThe pppoeCreditsTable contains informations about current
used resources and maximum allowed 'PPPoE-Service'-dependent
resources.
during a specified interval subsystem.
Creating entries: Entries are added by the user.
Deleting entries: Entries are removed by setting an
entry's pppoeCreditsSurveillance object to 'delete'. SEQUENCE OF PppoeCreditsEntry .1.3.6.1.4.1.272.4.24.2 |
pppoeCreditsEntry PppoeCreditsEntry .1.3.6.1.4.1.272.4.24.2.1 |
pppoeCreditsServiceThe PPPoE service name, indicating the service the Host is
requesting.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.24.2.1.1 |
pppoeCreditsSurveillanceSurveillance on or off.rw Enumeration .1.3.6.1.4.1.272.4.24.2.1.2 |
pppoeCreditsMeasuretimeTime of one observation interval in seconds.rw INTEGER .1.3.6.1.4.1.272.4.24.2.1.3 |
pppoeCreditsMaxInConMaximum number of allowed incoming connections during the
observation interval. -1 disables this limit.rw INTEGER .1.3.6.1.4.1.272.4.24.2.1.4 |
pppoeCreditsMaxOutConMaximum number of allowed outgoing connections during the
observation interval. -1 disables this limit.rw INTEGER .1.3.6.1.4.1.272.4.24.2.1.5 |
pppoeCreditsMaxInDurationMaximum connect time for incoming connections in
seconds during the observation interval. -1 disables this
limit.rw INTEGER .1.3.6.1.4.1.272.4.24.2.1.6 |
pppoeCreditsMaxOutDurationMaximum connect time for outgoing connections in
seconds during the observation interval. -1 disables this
limitrw INTEGER .1.3.6.1.4.1.272.4.24.2.1.7 |
pppoeCreditsTimeleftTime in seconds left in current interval.
Writing to Timeleft will restart the observation
interval.rw INTEGER .1.3.6.1.4.1.272.4.24.2.1.8 |
pppoeCreditsCurrentInConCurrent number of incoming connections.ro INTEGER .1.3.6.1.4.1.272.4.24.2.1.9 |
pppoeCreditsCurrentOutConCurrent number of outgoing connections.ro INTEGER .1.3.6.1.4.1.272.4.24.2.1.10 |
pppoeCreditsTotalInConTotal count of incoming connections during
the observation interval.ro INTEGER .1.3.6.1.4.1.272.4.24.2.1.11 |
pppoeCreditsTotalOutConTotal count of outgoing connections during
the observation interval.ro INTEGER .1.3.6.1.4.1.272.4.24.2.1.12 |
pppoeCreditsTotalInDurationTotal connect time of incoming connections
during the observation interval.ro INTEGER .1.3.6.1.4.1.272.4.24.2.1.13 |
pppoeCreditsTotalOutDurationTotal connect time of outgoing connections
during the observation interval.ro INTEGER .1.3.6.1.4.1.272.4.24.2.1.14 |
pppoeCreditsCurrentAccountTotal connect time of all outgoing connections during
the observation interval calculated in percent of
'pppoeCreditsMaxOutDuration'.ro INTEGER .1.3.6.1.4.1.272.4.24.2.1.15 |