BIANCA-BRICK-IPX-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
89
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
89 total| Object Name |
|---|
org OBJECT IDENTIFIER .1.3 |
RFC1155-SMI Unknown .1.3 |
dod OBJECT IDENTIFIER .1.3.6 |
internet OBJECT IDENTIFIER .1.3.6.1 |
private OBJECT IDENTIFIER .1.3.6.1.4 |
enterprises OBJECT IDENTIFIER .1.3.6.1.4.1 |
bintec OBJECT IDENTIFIER .1.3.6.1.4.1.272 |
bibo OBJECT IDENTIFIER .1.3.6.1.4.1.272.4 |
biboipx OBJECT IDENTIFIER .1.3.6.1.4.1.272.4.9 |
ipxClientTableEach entry describes a client that has connected
via WAN 2 SEQUENCE OF IPXClientEntry .1.3.6.1.4.1.272.4.9.1 |
ipxClientEntry IPXClientEntry .1.3.6.1.4.1.272.4.9.1.1 |
ipxClientNodeThe dynamically assigned Node Id of the clientro OCTET STRING .1.3.6.1.4.1.272.4.9.1.1.1 |
ipxClientCircIndexThe dynamically assigned Network Number of the clientro INTEGER .1.3.6.1.4.1.272.4.9.1.1.2 |
ipxClientReconnsThe number of reconnectionsro Counter .1.3.6.1.4.1.272.4.9.1.1.3 |
ipxAllowTableEach entry describes a rule for filtering
IPX packets. Only IPX packets matching all of those
rules will be delivered. SEQUENCE OF IPXAllowEntry .1.3.6.1.4.1.272.4.9.2 |
ipxAllowEntry IPXAllowEntry .1.3.6.1.4.1.272.4.9.2.1 |
ipxAllowPktTypeModeThe IPX packet type will be checked if this field
is set to 'verify'rw Enumeration .1.3.6.1.4.1.272.4.9.2.1.1 |
ipxAllowPktTypeThe various IPX packet typesrw Enumeration .1.3.6.1.4.1.272.4.9.2.1.2 |
ipxAllowDstIfStatusSet this value to 'up', if packets should only be forwarded
to active (dialup-)linksrw Enumeration .1.3.6.1.4.1.272.4.9.2.1.3 |
ipxAllowDstNetModeThe IPX destination network address will be checked if
this field is set to 'verify'rw Enumeration .1.3.6.1.4.1.272.4.9.2.1.4 |
ipxAllowDstNetThe IPX destination network addressrw INTEGER .1.3.6.1.4.1.272.4.9.2.1.5 |
ipxAllowDstNodeModeThe IPX destination node address will be checked if
this field is set to 'verify'rw Enumeration .1.3.6.1.4.1.272.4.9.2.1.6 |
ipxAllowDstNodeThe IPX destination node addressrw OCTET STRING .1.3.6.1.4.1.272.4.9.2.1.7 |
ipxAllowDstSockModeThe IPX destination socket number will be checked if
this field is set to 'verify'rw Enumeration .1.3.6.1.4.1.272.4.9.2.1.8 |
ipxAllowDstSockThe destination socketrw INTEGER .1.3.6.1.4.1.272.4.9.2.1.9 |
ipxAllowSrcIfIndexModeThe index of the receiving interface will be checked if
this field is set to 'verify'rw Enumeration .1.3.6.1.4.1.272.4.9.2.1.10 |
ipxAllowSrcIfIndexThe index of the receiving interfacerw INTEGER .1.3.6.1.4.1.272.4.9.2.1.11 |
ipxAllowSrcNetModeThe IPX source network address will be checked if
this field is set to 'verify'rw Enumeration .1.3.6.1.4.1.272.4.9.2.1.12 |
ipxAllowSrcNetThe IPX source network addressrw INTEGER .1.3.6.1.4.1.272.4.9.2.1.13 |
ipxAllowSrcNodeModeThe IPX source node address will be checked if
this field is set to 'verify'rw Enumeration .1.3.6.1.4.1.272.4.9.2.1.14 |
ipxAllowSrcNodeThe IPX source node addressrw OCTET STRING .1.3.6.1.4.1.272.4.9.2.1.15 |
ipxAllowSrcSockModeThe IPX source socket number will be checked if
this field is set to 'verify'rw Enumeration .1.3.6.1.4.1.272.4.9.2.1.16 |
ipxAllowSrcSockThe source socketrw INTEGER .1.3.6.1.4.1.272.4.9.2.1.17 |
ipxDenyTableEach entry describes a rule for filtering
IPX packets. IPX packets matching any of those
rules will be discarded. SEQUENCE OF IPXDenyEntry .1.3.6.1.4.1.272.4.9.3 |
ipxDenyEntry IPXDenyEntry .1.3.6.1.4.1.272.4.9.3.1 |
ipxDenyPktTypeModeThe IPX packet type will be checked if this field
is set to 'verify'rw Enumeration .1.3.6.1.4.1.272.4.9.3.1.1 |
ipxDenyPktTypeThe various IPX packet typesrw Enumeration .1.3.6.1.4.1.272.4.9.3.1.2 |
ipxDenyDstIfStatusSet this value to 'dormant', if packets should not be forwarded
to sleeping (dialup-)linksrw Enumeration .1.3.6.1.4.1.272.4.9.3.1.3 |
ipxDenyDstNetModeThe IPX destination network address will be checked if
this field is set to 'verify'rw Enumeration .1.3.6.1.4.1.272.4.9.3.1.4 |
ipxDenyDstNetThe IPX destination network addressrw INTEGER .1.3.6.1.4.1.272.4.9.3.1.5 |
ipxDenyDstNodeModeThe IPX destination node address will be checked if
this field is set to 'verify'rw Enumeration .1.3.6.1.4.1.272.4.9.3.1.6 |
ipxDenyDstNodeThe IPX destination node addressrw OCTET STRING .1.3.6.1.4.1.272.4.9.3.1.7 |
ipxDenyDstSockModeThe destination socket will be checked if
this field is set to 'verify'rw Enumeration .1.3.6.1.4.1.272.4.9.3.1.8 |
ipxDenyDstSockThe destination socketrw INTEGER .1.3.6.1.4.1.272.4.9.3.1.9 |
ipxDenySrcIfIndexModeThe index of the receiving interface will be checked if
this field is set to 'verify'rw Enumeration .1.3.6.1.4.1.272.4.9.3.1.10 |
ipxDenySrcIfIndexThe index of the receiving interfacerw INTEGER .1.3.6.1.4.1.272.4.9.3.1.11 |
ipxDenySrcNetModeThe IPX source socket number will be checked if
this field is set to 'verify'rw Enumeration .1.3.6.1.4.1.272.4.9.3.1.12 |
ipxDenySrcNetThe IPX source network addressrw INTEGER .1.3.6.1.4.1.272.4.9.3.1.13 |
ipxDenySrcNodeModeThe IPX destination node address will be checked if
this field is set to 'verify'rw Enumeration .1.3.6.1.4.1.272.4.9.3.1.14 |
ipxDenySrcNodeThe IPX destination node addressrw OCTET STRING .1.3.6.1.4.1.272.4.9.3.1.15 |
ipxDenySrcSockModeThe IPX source socket number will be checked if
this field is set to 'verify'rw Enumeration .1.3.6.1.4.1.272.4.9.3.1.16 |
ipxDenySrcSockThe source socketrw INTEGER .1.3.6.1.4.1.272.4.9.3.1.17 |
ipxAdmin OBJECT IDENTIFIER .1.3.6.1.4.1.272.4.9.4 |
ipxAdmSpxSpoofingEnable/disable SPX watchdog spoofing (on WAN links only)rw Enumeration .1.3.6.1.4.1.272.4.9.4.1 |
ipxAdmIpxSpoofingEnable/disable IPX watchdog spoofing (on WAN links only)rw Enumeration .1.3.6.1.4.1.272.4.9.4.2 |
ipxAdmNETBIOSReplHandling of replicated NetBIOS broadcasts:
off : dont replicate at all
on : enable normal replication
lan_only: dont replicate on WAN linksrw Enumeration .1.3.6.1.4.1.272.4.9.4.3 |
ipxAdmSpxVerTimeoutIdle time SPX will wait before sending a watchdogrw INTEGER .1.3.6.1.4.1.272.4.9.4.4 |
ipxAdmSpxAbrTimeoutIdle time SPX will wait before aborting the connectionrw INTEGER .1.3.6.1.4.1.272.4.9.4.5 |
ipxAdmRIPSAPOffsetOffset interval between RIP-Response and SAP-Responserw INTEGER .1.3.6.1.4.1.272.4.9.4.6 |
ipxAdmLearnStaticstake entries from ipxDestTable and/or ipxDestServTable
and put them into ipxStaticRoute-/ipxStaticServTablerw Enumeration .1.3.6.1.4.1.272.4.9.4.7 |
ipxAdmSpxConnsNumber of spoofed SPX connectionsro INTEGER .1.3.6.1.4.1.272.4.9.4.8 |
sapAllowTableEach entry describes a rule for filtering
services. Only services matching any of those
rules will be learned/forwarded. SEQUENCE OF SAPAllowEntry .1.3.6.1.4.1.272.4.9.5 |
sapAllowEntry SAPAllowEntry .1.3.6.1.4.1.272.4.9.5.1 |
sapAllowIfIndexModedont_verify: the interface index is not verified
verify: check interface index
delete: delete this rulerw Enumeration .1.3.6.1.4.1.272.4.9.5.1.1 |
sapAllowIfIndexThis rule is applied to services originating and/or
(see sapAllowDirection) destined for the interface
with this index.rw INTEGER .1.3.6.1.4.1.272.4.9.5.1.2 |
sapAllowDirectiondont_verify: the interface index is not verified
outgoing: this rule is applied to services being sent
incoming: this rule is applied to incoming services
both: this rule is applied to incoming and outgoing servicesrw Enumeration .1.3.6.1.4.1.272.4.9.5.1.3 |
sapAllowTypeModedont_verify: don't check service type
verify: check service typerw Enumeration .1.3.6.1.4.1.272.4.9.5.1.4 |
sapAllowTypeThe service type to be checked. Examples:
4: file server
7: print serverrw OCTET STRING .1.3.6.1.4.1.272.4.9.5.1.5 |
sapAllowNetModedont_verify: don't check network number
verify: check network numberrw Enumeration .1.3.6.1.4.1.272.4.9.5.1.6 |
sapAllowNetthe service's network number to be checkedrw OCTET STRING .1.3.6.1.4.1.272.4.9.5.1.7 |
sapAllowNodeModedont_verify: don't check node number
verify: check node numberrw Enumeration .1.3.6.1.4.1.272.4.9.5.1.8 |
sapAllowNodethe service's node number to be checkedrw OCTET STRING .1.3.6.1.4.1.272.4.9.5.1.9 |
sapAllowSockModedont_verify: don't check socket number
verify: check socket numberrw Enumeration .1.3.6.1.4.1.272.4.9.5.1.10 |
sapAllowSockthe service's socket number to be checkedrw OCTET STRING .1.3.6.1.4.1.272.4.9.5.1.11 |
sapAllowNameInstead of entering Type/Net/Node/Socket directly,
you could fill in the server name here. The
Type/Net/Node/Socket fields will then be looked
up in the ipxDestServTable. If a service of this
name exists, the values of this rule will be set.
Caution: the Brick IPX does not use this name field
for filtering. It is just meant for easier usage.
Only Type/Net/Node/Socket fields above
will be checked (according to the dont_verify/verify fields)rw DisplayString .1.3.6.1.4.1.272.4.9.5.1.12 |
sapDenyTableEach entry describes a rule for filtering
services. Services matching any of those
rules will be discarded. SEQUENCE OF SAPDenyEntry .1.3.6.1.4.1.272.4.9.6 |
sapDenyEntry SAPDenyEntry .1.3.6.1.4.1.272.4.9.6.1 |
sapDenyIfIndexModedont_verify: the interface index is not verified
verify: the interface index is not verified
delete: delete this rulerw Enumeration .1.3.6.1.4.1.272.4.9.6.1.1 |
sapDenyIfIndexThis rule is applied to services originating and/or
(see sapDenyDirection) destined for the interface
with this index.rw INTEGER .1.3.6.1.4.1.272.4.9.6.1.2 |
sapDenyDirectiondont_verify: the direction is not verified
outgoing: this rule is applied to services being sent
incoming: this rule is applied to incoming services
both: this rule is applied to incoming and outgoing servicesrw Enumeration .1.3.6.1.4.1.272.4.9.6.1.3 |
sapDenyTypeModedont_verify: don't check service type
verify: check service typerw Enumeration .1.3.6.1.4.1.272.4.9.6.1.4 |
sapDenyTypeThe service type to be checked. Examples:
4: file server
7: print serverrw OCTET STRING .1.3.6.1.4.1.272.4.9.6.1.5 |
sapDenyNetModedont_verify: don't check network number
verify: check network numberrw Enumeration .1.3.6.1.4.1.272.4.9.6.1.6 |
sapDenyNetthe service's network number to be checkedrw OCTET STRING .1.3.6.1.4.1.272.4.9.6.1.7 |
sapDenyNodeModedont_verify: don't check node number
verify: check node numberrw Enumeration .1.3.6.1.4.1.272.4.9.6.1.8 |
sapDenyNodethe service's node number to be checkedrw OCTET STRING .1.3.6.1.4.1.272.4.9.6.1.9 |
sapDenySockModedont_verify: don't check socket number
verify: check socket numberrw Enumeration .1.3.6.1.4.1.272.4.9.6.1.10 |
sapDenySockthe service's socket number to be checkedrw OCTET STRING .1.3.6.1.4.1.272.4.9.6.1.11 |
sapDenyNameInstead of entering Type/Net/Node/Socket directly,
you could fill in the server name here. The
Type/Net/Node/Socket fields will then be looked
up in the ipxDestServTable. If a service of this
name exists, the values of this rule will be set.
Caution: the Brick IPX does not use this name field
for filtering. It is just meant for easier usage.
Only Type/Net/Node/Socket fields above
will be checked (according to the dont_verify/verify fields)rw DisplayString .1.3.6.1.4.1.272.4.9.6.1.12 |