BIANCA-BRICK-IP-SERVICE-MIB
Standard SNMP MIB module defining data structures for BIANCA-BRICK-IP-SERVICE-MIB.
Imported Objects
Objects
26 total| Object Name |
|---|
org OBJECT IDENTIFIER .1.3 |
RFC1155-SMI Unknown .1.3 |
dod OBJECT IDENTIFIER .1.3.6 |
internet OBJECT IDENTIFIER .1.3.6.1 |
private OBJECT IDENTIFIER .1.3.6.1.4 |
enterprises OBJECT IDENTIFIER .1.3.6.1.4.1 |
bintec OBJECT IDENTIFIER .1.3.6.1.4.1.272 |
bibo OBJECT IDENTIFIER .1.3.6.1.4.1.272.4 |
biboip OBJECT IDENTIFIER .1.3.6.1.4.1.272.4.5 |
biboipsrv OBJECT IDENTIFIER .1.3.6.1.4.1.272.4.5.14 |
localTcpAllowTableFilter rule table for incoming TCP packets for local services.
This table is used to restrict access to TCP services provided
by the system.
o active rules have at least one of 'localTcpAllowAddrMode'
and 'localTcpAllowIfMode' set to 'verify'
o if there are active rules for a certain service,
incoming connections of this service type (port) must
match at least one of them.
o incoming connections to a service (port) without
an active rule are always allowed.
o connections originating from 127.0.0.1 are always
allowed SEQUENCE OF LocalTcpAllowEntry .1.3.6.1.4.1.272.4.5.14.1 |
localTcpAllowEntry LocalTcpAllowEntry .1.3.6.1.4.1.272.4.5.14.1.1 |
localTcpAllowAddrModeSpecifies wether or not the IP source address of incoming
TCP packets should checkedrw Enumeration .1.3.6.1.4.1.272.4.5.14.1.1.1 |
localTcpAllowAddrsource IP addressrw IpAddress .1.3.6.1.4.1.272.4.5.14.1.1.2 |
localTcpAllowMasksource IP address maskrw IpAddress .1.3.6.1.4.1.272.4.5.14.1.1.3 |
localTcpAllowIfModeSpecifies wether or not the source interface of incoming
TCP packets should checkedrw Enumeration .1.3.6.1.4.1.272.4.5.14.1.1.4 |
localTcpAllowIfIndexsource interface indexrw INTEGER .1.3.6.1.4.1.272.4.5.14.1.1.5 |
localTcpAllowServiceTCP servicerw Enumeration .1.3.6.1.4.1.272.4.5.14.1.1.6 |
localUdpAllowTableFilter rule table for incoming UDP packets for local services.
This table is used to restrict access to UDP services provided
by the system.
o active rules have at least one of 'localUdpAllowAddrMode'
and 'localUdpAllowIfMode' set to 'verify'
o if there are active rules for a certain service,
incoming packets of this service type must
match at least one of them.
o incoming packets to a service (port) without
an active rule are always allowed.
o packets originating from 127.0.0.1 are always
allowed SEQUENCE OF LocalUdpAllowEntry .1.3.6.1.4.1.272.4.5.14.2 |
localUdpAllowEntry LocalUdpAllowEntry .1.3.6.1.4.1.272.4.5.14.2.1 |
localUdpAllowAddrModeSpecifies wether or not the IP source address of incoming
UDP packets should checkedrw Enumeration .1.3.6.1.4.1.272.4.5.14.2.1.1 |
localUdpAllowAddrsource IP addressrw IpAddress .1.3.6.1.4.1.272.4.5.14.2.1.2 |
localUdpAllowMasksource IP address maskrw IpAddress .1.3.6.1.4.1.272.4.5.14.2.1.3 |
localUdpAllowIfModeSpecifies wether or not the source interface of incoming
UDP packets should checkedrw Enumeration .1.3.6.1.4.1.272.4.5.14.2.1.4 |
localUdpAllowIfIndexsource interface indexrw INTEGER .1.3.6.1.4.1.272.4.5.14.2.1.5 |
localUdpAllowServiceservicerw Enumeration .1.3.6.1.4.1.272.4.5.14.2.1.6 |
More MIBs from Bintec
Browse all BintecMIBs →The GENIE-ATM-SYSTEM-MIB provides management access to GenieATM software system objects, enabling monitoring of ATM switch operational status, resource utilization, and system-level configuration parameters. It facilitates the tracking of critical infrastructure metrics such as interface states, error counters, and process health for Alcatel-Lucent (now Nokia) ATM network elements.
Standard SNMP MIB module defining data structures for BIANCA-BRICK-PPP-MIB.
Standard SNMP MIB module defining data structures for BIANCA-BRICK-IP-MIB.
Standard SNMP MIB module defining data structures for BIANCA-BRICK-X25-MIB.
Standard SNMP MIB module defining data structures for BIANCA-BOX-ISDN-MIB.
Standard SNMP MIB module defining data structures for BIANCA-BRICK-ATM2-MIB.