BCAM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for BCAM-MIB.
524
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
524 total| Object Name |
|---|
sni OBJECT IDENTIFIER .1.3.6.1.4.1.231 |
RFC1155-SMI Unknown .1.3.6.1.4.1.231 |
sniProductMibs OBJECT IDENTIFIER .1.3.6.1.4.1.231.2 |
sniBcam OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.17 |
bcamTrapOutPoolOverThis trap will be sent if the resident memory used for
output cells exceeds the limit (bcamMemoryPoolOutputLimitTrap)
for more than 5 seconds.
bcamTrapString has the fields:
$HOST$: <hostname>
$UPTIME$: <bcamuptime>
$OUTLIMIT$: <memlimit>
$OUTCURRENT$: <memcurrent>
The following values will be sent together with the trap:
bcamGlobalHostName
bcamGlobalUpTime
bcamMemoryPoolOutputLimitTrap
bcamMemoryPoolOverCurrent
bcamTrapString TRAP-TYPE .1.3.6.1.4.1.231.2.17.0.301 |
bcamTrapOutPoolUnderThis trap will be sent if the resident memory used for
output cells has exceeded the limit (bcamMemoryPoolOutputLimitTrap)
and falls under the limit for more than 5 seconds.
bcamTrapString has the fields:
$HOST$: <hostname>
$UPTIME$: <bcamuptime>
$OUTLIMIT$: <memlimit>
$OUTCURRENT$: <memcurrent>
The following values will be sent together with the trap:
bcamGlobalHostName
bcamGlobalUpTime
bcamMemoryPoolOutputLimitTrap
bcamMemoryPoolUnderCurrent
bcamTrapString TRAP-TYPE .1.3.6.1.4.1.231.2.17.0.302 |
bcamTrapInPoolOverThis trap will be sent if the resident memory used for
input cells exceeds the limit (bcamMemoryPoolInputLimitTrap)
for more than 5 seconds.
bcamTrapString has the fields:
$HOST$: <hostname>
$UPTIME$: <bcamuptime>
$INLIMIT$: <memlimit>
$INCURRENT$: <memcurrent>
The following values will be sent together with the trap:
bcamGlobalHostName
bcamGlobalUpTime
bcamMemoryPoolInputLimitTrap
bcamTrapInPoolOverCurrent
bcamTrapString TRAP-TYPE .1.3.6.1.4.1.231.2.17.0.303 |
bcamTrapInPoolUnderThis trap will be sent if the resident memory used for
input cells has exceeded the limit (bcamMemoryPoolInputLimitTrap)
and falls under the limit for more than 5 seconds.
bcamTrapString has the fields:
$HOST$: <hostname>
$UPTIME$: <bcamuptime>
$INLIMIT$: <memlimit>
$INCURRENT$: <memcurrent>
The following values will be sent together with the trap:
bcamGlobalHostName
bcamGlobalUpTime
bcamMemoryPoolInputLimitTrap
bcamTrapInPoolUnderCurrent
bcamTrapString TRAP-TYPE .1.3.6.1.4.1.231.2.17.0.304 |
bcamTrapLinkUpThis trap will be sent if an interface enters the state active
(bcamIfAdminState).
bcamTrapString has the fields:
$HOST$: <hostname>
$UPTIME$: <bcamuptime>
$NUMBER$: <linknumber>
$NAME$: <linkname>
The following values will be sent together with the trap:
bcamGlobalHostName
bcamGlobalUpTime
bcamIfTabNumbers
bcamIfTabName
bcamTrapString TRAP-TYPE .1.3.6.1.4.1.231.2.17.0.305 |
bcamTrapLinkDownThis trap will be sent if an interface leaves the state active
(bcamIfAdminState).
bcamTrapString has the fields:
$HOST$: <hostname>
$UPTIME$: <bcamuptime>
$NUMBER$: <linknumber>
$NAME$: <linkname>
The following values will be sent together with the trap:
bcamGlobalHostName
bcamGlobalUpTime
bcamIfTabNumbers
bcamIfTabName
bcamTrapString TRAP-TYPE .1.3.6.1.4.1.231.2.17.0.306 |
bcamTrapSystemUpThis trap will be sent after a successful start of BCAM.
bcamTrapString has the fields:
$HOST$: <hostname>
$UPTIME$: <bcamuptime>
The following values will be sent together with the trap:
bcamGlobalHostName
bcamGlobalUpTime
bcamTrapString TRAP-TYPE .1.3.6.1.4.1.231.2.17.0.307 |
bcamTrap OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.17.1 |
bcamTrapStringTextual description of the trap. The trap string contains the values sent with
the trap in printable form separated by the keywords given at the description
of the individual traps. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.1.1 |
bcamTrapOutPoolOverCurrentThe number of bytes of resident memory used for output cells
when the trap condition (output pool over maximum) has been recognized. INTEGER .1.3.6.1.4.1.231.2.17.1.2 |
bcamTrapOutPoolUnderCurrentThe number of bytes of resident memory used for output cells
when the trap condition (output pool under maximum) has been recognized. INTEGER .1.3.6.1.4.1.231.2.17.1.3 |
bcamTrapInPoolOverCurrentThe number of bytes of resident memory used for input cells
when the trap condition (input pool over maximum) has been recognized. INTEGER .1.3.6.1.4.1.231.2.17.1.4 |
bcamTrapInPoolUnderCurrentThe number of bytes of resident memory used for input cells
when the trap condition (input pool under maximum) has been recognized. INTEGER .1.3.6.1.4.1.231.2.17.1.5 |
bcamGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.17.2 |
bcamGlobalBcamVersionThe version of BCAM in the form xx.yy
xx: mainversion
yy: subversionro DisplayString .1.3.6.1.4.1.231.2.17.2.1 |
bcamGlobalMibVersionVersion of BCAM specific MIB (beginning with 1).
Will be increased with every enhancement of this MIBro INTEGER .1.3.6.1.4.1.231.2.17.2.2 |
bcamGlobalUpTimeTime in seconds since start of BCAMro INTEGER .1.3.6.1.4.1.231.2.17.2.3 |
bcamGlobalPortNonprivThe lowest port number that may be used by non privileged
applicationsro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.2.4 |
bcamGlobalPortFreeThe lowest port number that will be assigned dynamical by BCAMro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.2.5 |
bcamGlobalNumBitmapThe number of bitmaps to administer slots in the data slot
pool. Every bitmap can administer 2048 slots. So the maximum
number of slots in a pool is bcamGlobalNumBitmap*2048ro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.2.6 |
bcamGlobalMaxRemoteIpThe maximum length in bytes BCAM uses for an NSDU
for an endsystem that is reached over at least one routerro INTEGER .1.3.6.1.4.1.231.2.17.2.7 |
bcamGlobalEsCreationIpThe types of IP protocols that will lead to automatic endsystem creation:
ipOff (1) : no automatic endsystem creation due to IP protocols.
ipInData (2) : automatic endsystem creation due to IP data received.
ipOutData (4) : automatic endsystem creation due to IP data sent.
ipRoutingProt (8) : automatic endsystem creation due to IP routing protocols.
ipRoutingData (16) : automatic endsystem creation due to routed IP protocols.ro Enumeration .1.3.6.1.4.1.231.2.17.2.8 |
bcamGlobalEsCreationIsoThe types of ISO 8473 and ISO 9542 protocols that will lead to automatic endsystem creation:
isoOff (1) : no automatic endsystem creation due to ISO protocols.
isoInData (2) : automatic endsystem creation due to ISO data received.
isoOutData (4) : automatic endsystem creation due to ISO data sent.
isoRoutingProt (8) : automatic endsystem creation due to ISO routing protocols.
isoRoutingData (16) : automatic endsystem creation due to routed ISO protocols.ro Enumeration .1.3.6.1.4.1.231.2.17.2.9 |
bcamGlobalBroadcastDescribes how incoming broadcasts will be treated.
on (2) : broadcasts will be evaluated and answered if necessary.
off (1) : broadcasts will be ignored.ro Enumeration .1.3.6.1.4.1.231.2.17.2.10 |
bcamGlobalArpDescribes if the address resolution protocol is used.
off (1) : no ARP will be used.
quiet (2) : ARP will be used the first time a route is used and periodically if there exists a
transport connection to the system described by this route and there was no data transfer
in the last supervision interval.
on (4) : ARP will be used the first time a route is used and periodically after the supervision
interval.ro Enumeration .1.3.6.1.4.1.231.2.17.2.11 |
bcamGlobalRarpDescribes if the reverse address resolution protocol will be supported.
off (1) : RARP not supported.
on (2) : RARP supported.ro Enumeration .1.3.6.1.4.1.231.2.17.2.12 |
bcamGlobalInWaitLimit1The lowest bucket limit for the recording of the input wait times in milliseconds.
The input wait time is the time interval between the
announcement of a message to an application and corresponding
receive call. Every change will reset all counters for the input wait time.rw INTEGER .1.3.6.1.4.1.231.2.17.2.13 |
bcamGlobalInWaitLimit2The second bucket limit for the recording of the input wait times in milliseconds.
The input wait time is the time interval between the
announcement of a message to an application and corresponding
receive call. Every change will reset all counters for the input wait time.rw INTEGER .1.3.6.1.4.1.231.2.17.2.14 |
bcamGlobalInWaitLimit3The third bucket limit for the recording of the input wait times in milliseconds.
The input wait time is the time interval between the
announcement of a message to an application and corresponding
receive call. Every change will reset all counters for the input wait time.rw INTEGER .1.3.6.1.4.1.231.2.17.2.15 |
bcamGlobalInWaitLimit4The highest bucket limit for the recording of the input wait times in milliseconds.
The input wait time is the time interval between the
announcement of a message to an application and corresponding
receive call. Every change will reset all counters for the input wait time.rw INTEGER .1.3.6.1.4.1.231.2.17.2.16 |
bcamGlobalInWaitChangeThe number of times the limits of the input wait time buckets have
been changed.ro INTEGER .1.3.6.1.4.1.231.2.17.2.17 |
bcamGlobalInWaitSetThe state of counting into the input wait time buckets.
off (2) : the counting is stopped.
on (1) : the counting is running.rw Enumeration .1.3.6.1.4.1.231.2.17.2.18 |
bcamGlobalReactLimit1The lowest bucket limit for the recording of the application reaction times in milliseconds.
The application reaction time is the time interval between a receive call
and a directly following send call. Every change will reset all counters for the
application reaction time.rw INTEGER .1.3.6.1.4.1.231.2.17.2.19 |
bcamGlobalReactLimit2The second bucket limit for the recording of the application reaction times in milliseconds.
The application reaction time is the time interval between a receive call
and a directly following send call. Every change will reset all counters for the
application reaction time.rw INTEGER .1.3.6.1.4.1.231.2.17.2.20 |
bcamGlobalReactLimit3The third bucket limit for the recording of the application reaction times in milliseconds.
The application reaction time is the time interval between a receive call
and a directly following send call. Every change will reset all counters for the
application reaction time.rw INTEGER .1.3.6.1.4.1.231.2.17.2.21 |
bcamGlobalReactLimit4The highest bucket limit for the recording of the application reaction times in milliseconds.
The application reaction time is the time interval between a receive call
and a directly following send call. Every change will reset all counters for the
application reaction time.rw INTEGER .1.3.6.1.4.1.231.2.17.2.22 |
bcamGlobalReactChangeThe number of times the limits of the application reaction time buckets have
been changed.ro INTEGER .1.3.6.1.4.1.231.2.17.2.23 |
bcamGlobalReactSetThe state of counting into the application reaction time buckets.
off (2) : the counting is stopped.
on (1) : the counting is running.rw Enumeration .1.3.6.1.4.1.231.2.17.2.24 |
bcamGlobalInProcLimit1The lowest bucket limit for the recording of the inbound processing times in milliseconds.
The inbound processing time is the time interval between the arrival
of the first byte of a message at layer 2 and the receive of the last byte
this message by the application. Every change will reset all counters for the
inbound processing time.rw INTEGER .1.3.6.1.4.1.231.2.17.2.25 |
bcamGlobalInProcLimit2The second bucket limit for the recording of the inbound processing times in milliseconds.
The inbound processing time is the time interval between the arrival
of the first byte of a message at layer 2 and the receive of the last byte
this message by the application. Every change will reset all counters for the
inbound processing time.rw INTEGER .1.3.6.1.4.1.231.2.17.2.26 |
bcamGlobalInProcLimit3The third bucket limit for the recording of the inbound processing times in milliseconds.
The inbound processing time is the time interval between the arrival
of the first byte of a message at layer 2 and the receive of the last byte
this message by the application. Every change will reset all counters for the
inbound processing time.rw INTEGER .1.3.6.1.4.1.231.2.17.2.27 |
bcamGlobalInProcLimit4The highest bucket limit for the recording of the inbound processing times in milliseconds.
The inbound processing time is the time interval between the arrival
of the first byte of a message at layer 2 and the receive of the last byte
this message by the application. Every change will reset all counters for the
inbound processing time.rw INTEGER .1.3.6.1.4.1.231.2.17.2.28 |
bcamGlobalInProcChangeThe number of times the limits of the inbound processing time buckets have
been changed.ro INTEGER .1.3.6.1.4.1.231.2.17.2.29 |
bcamGlobalInProcSetThe state of counting into the inbound processing time buckets.
off (2) : the counting is stopped.
on (1) : the counting is running.rw Enumeration .1.3.6.1.4.1.231.2.17.2.30 |
bcamGlobalOutProcLimit1The lowest bucket limit for the recording of the outbound processing times in milliseconds.
The outbound processing time is the time interval between the send call
of an application and the confirmation for the processing of the
last byte of the message by layer 1. Every change will reset all counters for the
outbound processing time.rw INTEGER .1.3.6.1.4.1.231.2.17.2.31 |
bcamGlobalOutProcLimit2The second bucket limit for the recording of the outbound processing times in milliseconds.
The outbound processing time is the time interval between the send call
of an application and the confirmation for the processing of the
last byte of the message by layer 1. Every change will reset all counters for the
outbound processing time.rw INTEGER .1.3.6.1.4.1.231.2.17.2.32 |
bcamGlobalOutProcLimit3The third bucket limit for the recording of the outbound processing times in milliseconds.
The outbound processing time is the time interval between the send call
of an application and the confirmation for the processing of the
last byte of the message by layer 1. Every change will reset all counters for the
outbound processing time.rw INTEGER .1.3.6.1.4.1.231.2.17.2.33 |
bcamGlobalOutProcLimit4The highest bucket limit for the recording of the outbound processing times in milliseconds.
The outbound processing time is the time interval between the send call
of an application and the confirmation for the processing of the
last byte of the message by layer 1. Every change will reset all counters for the
outbound processing time.rw INTEGER .1.3.6.1.4.1.231.2.17.2.34 |
bcamGlobalOutProcChangeThe number of times the limits of the outbound processing time buckets have
been changed.ro INTEGER .1.3.6.1.4.1.231.2.17.2.35 |
bcamGlobalOutProcSetThe state of counting into the outbound processing time buckets.
off (2) : the counting is stopped.
on (1) : the counting is running.rw Enumeration .1.3.6.1.4.1.231.2.17.2.36 |
bcamGlobalSnmpReleaseThe time interval in minutes for which the values for already closed connections
and applications are still available.rw INTEGER .1.3.6.1.4.1.231.2.17.2.37 |
bcamGlobalTrapPollIntervalThe time interval in seconds after which the SNMP agent will poll for traps.rw INTEGER .1.3.6.1.4.1.231.2.17.2.38 |
bcamGlobalFileApplTableThe name of the file that contains the assignments of NEA or ISO applications to the virtual
host on which they shall run.ro DisplayString .1.3.6.1.4.1.231.2.17.2.39 |
bcamGlobalFileSocketHostTableThe name of the file that contains the assignments of IP adresses to socket host names
for automatic created endsystems.ro DisplayString .1.3.6.1.4.1.231.2.17.2.40 |
bcamGlobalFileProcTableThe name of the file that contains the assignments of host names to net addresses for automatic
created endsystems.ro DisplayString .1.3.6.1.4.1.231.2.17.2.41 |
bcamGlobalAccessProcTableThe access of the file named in bcamGlobalFileProcTable:
read (1) : only endsystems contained in the file will be created by automatic endsystem creation.
update (2) : the file will be extended if a new endsystem is created.ro Enumeration .1.3.6.1.4.1.231.2.17.2.42 |
bcamGlobalHostNameNEA name of the local endsystemro DisplayString .1.3.6.1.4.1.231.2.17.2.43 |
bcamMemory OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.17.3 |
bcamMemoryClass3The number of bytes of class 3 memory requested by BCAM.ro INTEGER .1.3.6.1.4.1.231.2.17.3.1 |
bcamMemoryClass4The number of bytes of class 4 memory requested by BCAM.ro INTEGER .1.3.6.1.4.1.231.2.17.3.2 |
bcamMemoryLenLongEventSlotThe length of one long event slot in bytes.ro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.3.3 |
bcamMemoryOccLongEventSlotThe number of long event slots currently used.ro INTEGER .1.3.6.1.4.1.231.2.17.3.4 |
bcamMemoryLenShortEventSlotThe length of one short event slot in bytes.ro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.3.5 |
bcamMemoryOccShortEventSlotThe number of short event slots currently used.ro INTEGER .1.3.6.1.4.1.231.2.17.3.6 |
bcamMemoryLenTransParamSlotThe length of one transport parameter block in bytes.ro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.3.7 |
bcamMemoryOccTransParamSlotThe number of transport parameter blocks currently used.ro INTEGER .1.3.6.1.4.1.231.2.17.3.8 |
bcamMemoryLenSnmpParamSlotThe length of one SNMP parameter block in bytes.ro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.3.9 |
bcamMemoryOccSnmpParamSlotThe number of SNMP parameter blocks currently used.ro INTEGER .1.3.6.1.4.1.231.2.17.3.10 |
bcamMemoryLenApplCbThe length of one application control block in bytes.ro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.3.11 |
bcamMemoryOccApplCbThe number of application control blocks currently used.ro INTEGER .1.3.6.1.4.1.231.2.17.3.12 |
bcamMemoryLenEnaCbThe length of one control block in bytes.ro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.3.13 |
bcamMemoryOccEnaCbThe number of control blocks currently used.ro INTEGER .1.3.6.1.4.1.231.2.17.3.14 |
bcamMemoryLenExtApplCbThe length of one extended application control block in bytes.ro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.3.15 |
bcamMemoryOccExtApplCbThe number of extended application control blocks currently used.ro INTEGER .1.3.6.1.4.1.231.2.17.3.16 |
bcamMemoryLenShortResConn2The length of one short resident connection control block 2 in bytes.ro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.3.17 |
bcamMemoryOccShortResConn2The number of short resident connection control blocks 2 currently used.ro INTEGER .1.3.6.1.4.1.231.2.17.3.18 |
bcamMemoryLenLongResConn2The length of one long resident connection control block 2 in bytes.ro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.3.19 |
bcamMemoryOccLongResConn2The number of long resident connection control blocks 2 currently used.ro INTEGER .1.3.6.1.4.1.231.2.17.3.20 |
bcamMemoryLenShortPagConn1The length of one short pageable connection control block 1 in bytes.ro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.3.21 |
bcamMemoryOccShortPagConn1The number of short pageable connection control blocks 1 currently used.ro INTEGER .1.3.6.1.4.1.231.2.17.3.22 |
bcamMemoryLenSnmpConnThe length of one SNMP connection control block in bytes.ro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.3.23 |
bcamMemoryOccSnmpConnThe number of SNMP connection control blocks currently used.ro INTEGER .1.3.6.1.4.1.231.2.17.3.24 |
bcamMemoryLenLongPagConn1The length of one long pageable connection control block 1 in bytes.ro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.3.25 |
bcamMemoryOccLongPagConn1The number of long pageable connection control blocks 1 currently used.ro INTEGER .1.3.6.1.4.1.231.2.17.3.26 |
bcamMemoryLenShortPagConn2The length of one short pageable connection control block 2 in bytes.ro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.3.27 |
bcamMemoryOccShortPagConn2The number of short pageable connection control blocks 2 currently used.ro INTEGER .1.3.6.1.4.1.231.2.17.3.28 |
bcamMemoryPoolInputCurrentThe number of bytes of resident memory currently used for input cellsro INTEGER .1.3.6.1.4.1.231.2.17.3.29 |
bcamMemoryPoolInputResumeDescribes whether an interface waits for memory for input . If zero, some
interfaces will not have enough input buffer( A cell request was rejected
because bcamMemoryPoolInputCurrent exceeded bcamMemoryPoolInputLimitTrap).ro INTEGER -- ASSLEN: 1 .1.3.6.1.4.1.231.2.17.3.30 |
bcamMemoryPoolInputMonMaxThe maximum number of bytes of resident memory used for input cells for the
last 5 seconds.ro INTEGER .1.3.6.1.4.1.231.2.17.3.31 |
bcamMemoryPoolInputMonMinThe minimum number of bytes of resident memory used for input cells for the
last 5 seconds.ro INTEGER .1.3.6.1.4.1.231.2.17.3.32 |
bcamMemoryPoolInputLimitThe maximum number of bytes of resident memory to be used for input cells.ro INTEGER .1.3.6.1.4.1.231.2.17.3.33 |
bcamMemoryPoolInputLimitTrapThe trap limit for the number of bytes of resident memory for input cells
(if bcamMemoryPoolInputMonMin is greater than bcamMemoryPoolInputLimitTrap, a trap will
be sent).ro INTEGER .1.3.6.1.4.1.231.2.17.3.34 |
bcamMemoryPoolMaxResidentThe maximum number of bytes of resident memory to be used for input and output cells.rw INTEGER .1.3.6.1.4.1.231.2.17.3.35 |
bcamMemoryPoolMaxPageableThe maximum number of bytes of pageable memory to be used for input and output cells.rw INTEGER .1.3.6.1.4.1.231.2.17.3.36 |
bcamMemoryPoolInputMaxPageableThe maximum number of bytes of pageable memory to be used for input cells.ro INTEGER .1.3.6.1.4.1.231.2.17.3.37 |
bcamMemoryPoolOutputCurrentThe number of bytes of resident memory currently used for output cells.ro INTEGER .1.3.6.1.4.1.231.2.17.3.38 |
bcamMemoryPoolOutputResumeDescribes whether an interface waits for memory for output . If zero, some
interfaces will not have enough output buffer( A cell request was rejected
because bcamMemoryPoolOutputCurrent exceeded bcamMemoryPoolOutputLimitTrap).ro INTEGER -- ASSLEN: 1 .1.3.6.1.4.1.231.2.17.3.39 |
bcamMemoryPoolOutputMonMaxThe maximum number of bytes of resident memory used for output cells for the
last 5 seconds.ro INTEGER .1.3.6.1.4.1.231.2.17.3.40 |
bcamMemoryPoolOutputMonMinThe minimum number of bytes of resident memory used for output cells for the
last 5 seconds.ro INTEGER .1.3.6.1.4.1.231.2.17.3.41 |
bcamMemoryPoolOutputLimitThe maximum number of bytes of resident memory to be used for output cells.ro INTEGER .1.3.6.1.4.1.231.2.17.3.42 |
bcamMemoryPoolOutputLimitTrapThe trap limit for the number of bytes of resident memory for output cells
(if bcamMemoryPoolOutputMonMin is greater than bcamMemoryPoolOutputLimitTrap, a trap will
be sent).ro INTEGER .1.3.6.1.4.1.231.2.17.3.43 |
bcamMemoryPoolMaxCellsThe maximum number of cells contained in every pool type.ro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.3.44 |
bcamMemoryPoolOutputMaxPageableThe maximum number of bytes of pageable memory to be used for output cells.ro INTEGER .1.3.6.1.4.1.231.2.17.3.45 |
bcamMemoryPoolRoutingCurrentThe number of bytes of resident memory currently used for routing cellsro INTEGER .1.3.6.1.4.1.231.2.17.3.46 |
bcamMemoryPoolRoutingLimitThe maximum number of bytes of resident memory to be used for routing cells.ro INTEGER .1.3.6.1.4.1.231.2.17.3.47 |
bcamMemoryPoolPageableCurrentThe number of bytes of pageable memory currently used for poolsro INTEGER .1.3.6.1.4.1.231.2.17.3.48 |
bcamMemoryPoolPageableFixedThe number of bytes of pageable fixed memory currently used for output cells.ro INTEGER .1.3.6.1.4.1.231.2.17.3.49 |
bcamMemoryCellReqSuccThe number of successful cell requests.ro INTEGER .1.3.6.1.4.1.231.2.17.3.50 |
bcamMemoryCellReqResOutExceedThe number of requests for resident output cells that failed
because the limit has been reached.ro INTEGER .1.3.6.1.4.1.231.2.17.3.51 |
bcamMemoryCellReqResInExceedThe number of requests for resident input cells that failed
because limit has been reached.ro INTEGER .1.3.6.1.4.1.231.2.17.3.52 |
bcamMemoryCellReqTempExceedThe number of cell requests failed because of temporary shortage.ro INTEGER .1.3.6.1.4.1.231.2.17.3.53 |
bcamMemoryCellReqBitmapFullThe number of cell requests failed because bitmap was full.ro INTEGER .1.3.6.1.4.1.231.2.17.3.54 |
bcamMemoryCellReqNoMemoryThe number of cell requests failed because memory request failed.ro INTEGER .1.3.6.1.4.1.231.2.17.3.55 |
bcamMemoryCellReqPagInExceedThe number of requests for pageable input cells that failed
because limit has been reached.ro INTEGER .1.3.6.1.4.1.231.2.17.3.56 |
bcamMemoryCellReqPagOutExceedThe number of requests for pageable output cells that failed
because limit has been reached.ro INTEGER .1.3.6.1.4.1.231.2.17.3.57 |
bcamTrace OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.17.4 |
bcamTraceSavingStateDescribes if any of the running BCAM traces are saved to a file.
noSaving (32) : no trace will be written
initiated (1) : the trace saving task has been created
active (2) : the trace saving task is active
shutting (4) : the trace saving task is terminating
passive (8) : the trace file has been closed
waiting (16) : the trace saving task is waiting for trace data to write
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.4.1 |
bcamTraceFilenameThe name of the file currently used for saving BCAM traces.ro DisplayString .1.3.6.1.4.1.231.2.17.4.2 |
bcamTraceMaxFilesizeThe maximum size of one file used for saving BCAM traces in bytes.ro INTEGER .1.3.6.1.4.1.231.2.17.4.3 |
bcamTraceNumberFilesThe number of files used for saving BCAM traces.ro INTEGER .1.3.6.1.4.1.231.2.17.4.4 |
bcamTraceAdmStateThe current state of the trace.
stopped (8) : the trace is not running.
running (1) : the trace is running.
save (2) : the trace is running and saved to a file.
hold (4) : the trace data will be kept in case of an error.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.4.5 |
bcamTraceAdmNumberBufferThe number of buffers used for the tracero INTEGER .1.3.6.1.4.1.231.2.17.4.6 |
bcamTraceAdmBufferLenThe length of one trace buffer in bytes (rounded up to multiples of 256).ro INTEGER .1.3.6.1.4.1.231.2.17.4.7 |
bcamTraceBasicStateThe current state of the trace.
stopped (8) : the trace is not running.
running (1) : the trace is running.
save (2) : the trace is running and saved to a file.
hold (4) : the trace data will be kept in case of an error.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.4.8 |
bcamTraceBasicNumberBufferThe number of buffers used for the tracero INTEGER .1.3.6.1.4.1.231.2.17.4.9 |
bcamTraceBasicBufferLenThe length of one trace buffer in bytes (rounded up to multiples of 256).ro INTEGER .1.3.6.1.4.1.231.2.17.4.10 |
bcamTraceConnStateThe current state of the trace.
stopped (8) : the trace is not running.
running (1) : the trace is running.
save (2) : the trace is running and saved to a file.
hold (4) : the trace data will be kept in case of an error.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.4.11 |
bcamTraceConnNumberBufferThe number of buffers used for the tracero INTEGER .1.3.6.1.4.1.231.2.17.4.12 |
bcamTraceConnBufferLenThe length of one trace buffer in bytes (rounded up to multiples of 256).ro INTEGER .1.3.6.1.4.1.231.2.17.4.13 |
bcamTraceLocalStateThe current state of the trace.
stopped (8) : the trace is not running.
running (1) : the trace is running.
save (2) : the trace is running and saved to a file.
hold (4) : the trace data will be kept in case of an error.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.4.14 |
bcamTraceLocalNumberBufferThe number of buffers used for the tracero INTEGER .1.3.6.1.4.1.231.2.17.4.15 |
bcamTraceLocalBufferLenThe length of one trace buffer in bytes (rounded up to multiples of 256).ro INTEGER .1.3.6.1.4.1.231.2.17.4.16 |
bcamTraceMappingStateThe current state of the trace.
stopped (8) : the trace is not running.
running (1) : the trace is running.
save (2) : the trace is running and saved to a file.
hold (4) : the trace data will be kept in case of an error.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.4.17 |
bcamTraceMappingNumberBufferThe number of buffers used for the tracero INTEGER .1.3.6.1.4.1.231.2.17.4.18 |
bcamTraceMappingBufferLenThe length of one trace buffer in bytes (rounded up to multiples of 256).ro INTEGER .1.3.6.1.4.1.231.2.17.4.19 |
bcamTraceMgmtStateThe current state of the trace.
stopped (8) : the trace is not running.
running (1) : the trace is running.
save (2) : the trace is running and saved to a file.
hold (4) : the trace data will be kept in case of an error.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.4.20 |
bcamTraceMgmtNumberBufferThe number of buffers used for the tracero INTEGER .1.3.6.1.4.1.231.2.17.4.21 |
bcamTraceMgmtBufferLenThe length of one trace buffer in bytes (rounded up to multiples of 256).ro INTEGER .1.3.6.1.4.1.231.2.17.4.22 |
bcamTraceNetStateThe current state of the trace.
stopped (8) : the trace is not running.
running (1) : the trace is running.
save (2) : the trace is running and saved to a file.
hold (4) : the trace data will be kept in case of an error.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.4.23 |
bcamTraceNetNumberBufferThe number of buffers used for the tracero INTEGER .1.3.6.1.4.1.231.2.17.4.24 |
bcamTraceNetBufferLenThe length of one trace buffer in bytes (rounded up to multiples of 256).ro INTEGER .1.3.6.1.4.1.231.2.17.4.25 |
bcamTraceSnmpStateThe current state of the trace.
stopped (8) : the trace is not running.
running (1) : the trace is running.
save (2) : the trace is running and saved to a file.
hold (4) : the trace data will be kept in case of an error.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.4.26 |
bcamTraceSnmpNumberBufferThe number of buffers used for the tracero INTEGER .1.3.6.1.4.1.231.2.17.4.27 |
bcamTraceSnmpBufferLenThe length of one trace buffer in bytes (rounded up to multiples of 256).ro INTEGER .1.3.6.1.4.1.231.2.17.4.28 |
bcamTraceTransStateThe current state of the trace.
stopped (8) : the trace is not running.
running (1) : the trace is running.
save (2) : the trace is running and saved to a file.
hold (4) : the trace data will be kept in case of an error.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.4.29 |
bcamTraceTransNumberBufferThe number of buffers used for the tracero INTEGER .1.3.6.1.4.1.231.2.17.4.30 |
bcamTraceTransBufferLenThe length of one trace buffer in bytes (rounded up to multiples of 256).ro INTEGER .1.3.6.1.4.1.231.2.17.4.31 |
bcamTraceInfoStateThe current state of the trace.
stopped (8) : the trace is not running.
running (1) : the trace is running.
save (2) : the trace is running and saved to a file.
hold (4) : the trace data will be kept in case of an error.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.4.32 |
bcamTraceInfoNumberBufferThe number of buffers used for the tracero INTEGER .1.3.6.1.4.1.231.2.17.4.33 |
bcamTraceInfoBufferLenThe length of one trace buffer in bytes (rounded up to multiples of 256).ro INTEGER .1.3.6.1.4.1.231.2.17.4.34 |
bcamTsap OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.17.5 |
bcamTsapCurrOpenThe number of currently active TSAPs (including BCAM internal applications).ro INTEGER .1.3.6.1.4.1.231.2.17.5.1 |
bcamTsapTotOpenThe number of TSAPs opened since start of BCAM (excluding the active TSAPs).ro INTEGER .1.3.6.1.4.1.231.2.17.5.2 |
bcamTsapSendCallNumber of successful send calls of all TSAPs since start of BCAMro INTEGER .1.3.6.1.4.1.231.2.17.5.3 |
bcamTsapSendByteHighNumber of bytes given to BCAM-interface to send from all TSAPs
since start of BCAM (high word, multiply by 4294967296).ro INTEGER -- ASSLEN: 4 .1.3.6.1.4.1.231.2.17.5.4 |
bcamTsapSendByteLowNumber of bytes given to BCAM-interface to send from all TSAPs
since start of BCAM (low word, add to high word).ro INTEGER -- ASSLEN: 4 .1.3.6.1.4.1.231.2.17.5.5 |
bcamTsapRecvCallNumber of successful receive calls of all TSAPs since start of BCAMro INTEGER .1.3.6.1.4.1.231.2.17.5.6 |
bcamTsapRecvByteHighNumber of bytes given from BCAM to all TSAPs since start of BCAM (high word, multiply by 4294967296).ro INTEGER -- ASSLEN: 4 .1.3.6.1.4.1.231.2.17.5.7 |
bcamTsapRecvByteLowNumber of bytes given from BCAM to all TSAPs since start of BCAM (low word, add to high word).ro INTEGER -- ASSLEN: 4 .1.3.6.1.4.1.231.2.17.5.8 |
bcamTsapSendCallClessThe number of successful send calls for connectionless data of all TSAPs since start of BCAMro INTEGER .1.3.6.1.4.1.231.2.17.5.9 |
bcamTsapSendByteClessHighThe number of bytes given to BCAM-interface to send connectionless from all TSAPs
since start of BCAM (high word, multiply by 4294967296).ro INTEGER -- ASSLEN: 4 .1.3.6.1.4.1.231.2.17.5.10 |
bcamTsapSendByteClessLowThe number of bytes given to BCAM-interface to send connectionless from all TSAPs
since start of BCAM (low word, add to high word).ro INTEGER -- ASSLEN: 4 .1.3.6.1.4.1.231.2.17.5.11 |
bcamTsapRecvCallClessThe number of successful send calls for connectionless data of all TSAPs since start of BCAMro INTEGER .1.3.6.1.4.1.231.2.17.5.12 |
bcamTsapRecvByteClessHighThe number of bytes received connectionless given from BCAM to all TSAPs
since start of BCAM (high word, multiply by 4294967296).ro INTEGER -- ASSLEN: 4 .1.3.6.1.4.1.231.2.17.5.13 |
bcamTsapRecvByteClessLowThe number of bytes received connectionless given from BCAM to all TSAPs
since start of BCAM (low word, add to high word).ro INTEGER -- ASSLEN: 4 .1.3.6.1.4.1.231.2.17.5.14 |
bcamTsapNumTableThe number of table entries.ro INTEGER -- ASSLEN: 4 .1.3.6.1.4.1.231.2.17.5.15 |
bcamTsapMaxTsapThe maximum number of not predefined applications that may be opened
simultaneously.ro INTEGER -- ASSLEN: 4 .1.3.6.1.4.1.231.2.17.5.16 |
bcamTsapMaxTsapTaskThe maximum number of not predefined applications that may be opened
simultaneously by one task.ro INTEGER -- ASSLEN: 4 .1.3.6.1.4.1.231.2.17.5.17 |
bcamTsapMaxCepTsapThe maximum number of connections a non system application may have opened concurrently.ro INTEGER -- ASSLEN: 4 .1.3.6.1.4.1.231.2.17.5.18 |
bcamTsapRejTsapThe number of rejected tsap openings because of reached maximum (see bcamTsapMaxTsap).ro INTEGER -- ASSLEN: 4 .1.3.6.1.4.1.231.2.17.5.19 |
bcamTsapRejTsapTaskThe number of rejected tsap openings because of reached maximum for one task (see bcamTsapMaxTsapTask).ro INTEGER -- ASSLEN: 4 .1.3.6.1.4.1.231.2.17.5.20 |
bcamTsapRejCepTsapThe number of connection requests rejected because the maximum number of connections for this tsap
has been reached (see bcamTsapMaxCepTsap).ro INTEGER -- ASSLEN: 4 .1.3.6.1.4.1.231.2.17.5.21 |
bcamTsapTabTable of all active TSAPs SEQUENCE OF TsapEntry .1.3.6.1.4.1.231.2.17.5.22 |
bcamTsapTabEntryInformation about a current active TSAP TsapEntry .1.3.6.1.4.1.231.2.17.5.22.1 |
bcamTsapTabNumbersThe definite identifier for this application. Even if the same application is disabled and then
reenabled, the identfier will get a new value.ro Counter .1.3.6.1.4.1.231.2.17.5.22.1.1 |
bcamTsapTabStateThe current state of this application.
opening (1) : the application enableing is in progress.
open (2): the application is ready for requesting or accepting connections.
closing (3): the termination of the application is in progress.
closed (4): the application has been closed.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.5.22.1.2 |
bcamTsapTabDurationThe time in seconds the application was enabled.ro Gauge .1.3.6.1.4.1.231.2.17.5.22.1.3 |
bcamTsapTabDateApplEnableThe date of the application enableing.
Format: YYYYMMDDro DisplayString .1.3.6.1.4.1.231.2.17.5.22.1.4 |
bcamTsapTabTimeApplEnableThe time of the application enableing.
Format: HHMMSSro DisplayString .1.3.6.1.4.1.231.2.17.5.22.1.5 |
bcamTsapTabTypNameThe type of name of this application.
NeaName (1) : the name consists of 8 byte application name and 8 byte name of endsystem.
SocketName (2) : the name consists of up to 32 byte socket name.
IsoName (3) : the name consists of up to 78 byte iso name.ro Enumeration .1.3.6.1.4.1.231.2.17.5.22.1.6 |
bcamTsapTabNameThe name of this application according the type of the name (bcamTsapTabTypName).ro DisplayString .1.3.6.1.4.1.231.2.17.5.22.1.7 |
bcamTsapTabPortnumberThe port number used by this application (if known).ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.8 |
bcamTsapTabOsiTselThe OSI transport selector of this application (if known).ro OCTET STRING .1.3.6.1.4.1.231.2.17.5.22.1.9 |
bcamTsapTabNeaTselThe NEA transport selector of this application (if known).ro OCTET STRING .1.3.6.1.4.1.231.2.17.5.22.1.10 |
bcamTsapTabHostThe name of the host in which the application resides.ro DisplayString .1.3.6.1.4.1.231.2.17.5.22.1.11 |
bcamTsapTabDiagnosticThe reason why the application was disabled (for diagnostic purposes only).ro OCTET STRING .1.3.6.1.4.1.231.2.17.5.22.1.12 |
bcamTsapTabTsduSendsThe number of packets to send given to BCAM at the TSAP by this application.ro Counter .1.3.6.1.4.1.231.2.17.5.22.1.13 |
bcamTsapTabByteSendsThe number of bytes to send given to BCAM at the TSAP by this application.ro Counter .1.3.6.1.4.1.231.2.17.5.22.1.14 |
bcamTsapTabTsduReceivedsThe number of packets received at the TSAP by this application.ro Counter .1.3.6.1.4.1.231.2.17.5.22.1.15 |
bcamTsapTabByteReceivedsThe number of bytes received at the TSAP by this application.ro Counter .1.3.6.1.4.1.231.2.17.5.22.1.16 |
bcamTsapTabSendCallOverMaxsThe number of send calls of this application while BCAM limits have been reached.ro Counter .1.3.6.1.4.1.231.2.17.5.22.1.17 |
bcamTsapTabLetterTimeoutsThe number of packets that were deleted without being delivered to the application due
to timeout of the letter timer.ro Counter .1.3.6.1.4.1.231.2.17.5.22.1.18 |
bcamTsapTabInWaitBuck1HistThe number of times the input wait time was in the time interval between
zero and bcamGlobalInWaitLimit1 for meanwhile closed applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.19 |
bcamTsapTabInWaitBuck2HistThe number of times the input wait time was in the time interval between
bcamGlobalInWaitLimit1 and bcamGlobalInWaitLimit2 for meanwhile closed applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.20 |
bcamTsapTabInWaitBuck3HistThe number of times the input wait time was in the time interval between
bcamGlobalInWaitLimit2 and bcamGlobalInWaitLimit3 for meanwhile closed applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.21 |
bcamTsapTabInWaitBuck4HistThe number of times the input wait time was in the time interval between
bcamGlobalInWaitLimit3 and bcamGlobalInWaitLimit4 for meanwhile closed applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.22 |
bcamTsapTabInWaitBuck5HistThe number of times the input wait time was longer than
bcamGlobalInWaitLimit4 for meanwhile closed applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.23 |
bcamTsapTabReactBuck1HistThe number of times the application reaction time was in the time interval between
zero and bcamGlobalReactLimit1 for meanwhile closed applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.24 |
bcamTsapTabReactBuck2HistThe number of times the application reaction time was in the time interval between
bcamGlobalReactLimit1 and bcamGlobalReactLimit2 for meanwhile closed applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.25 |
bcamTsapTabReactBuck3HistThe number of times the application reaction time was in the time interval between
bcamGlobalReactLimit2 and bcamGlobalReactLimit3 for meanwhile closed applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.26 |
bcamTsapTabReactBuck4HistThe number of times the application reaction time was in the time interval between
bcamGlobalReactLimit3 and bcamGlobalReactLimit4 for meanwhile closed applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.27 |
bcamTsapTabReactBuck5HistThe number of times the application reaction time was longer than
bcamGlobalReactLimit4 for meanwhile closed applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.28 |
bcamTsapTabInWaitBuck1The number of times the input wait time was in the time interval between
zero and bcamGlobalInWaitLimit1 for opened applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.29 |
bcamTsapTabInWaitBuck2The number of times the input wait time was in the time interval between
bcamGlobalInWaitLimit1 and bcamGlobalInWaitLimit2 for opened applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.30 |
bcamTsapTabInWaitBuck3The number of times the input wait time was in the time interval between
bcamGlobalInWaitLimit2 and bcamGlobalInWaitLimit3 for opened applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.31 |
bcamTsapTabInWaitBuck4The number of times the input wait time was in the time interval between
bcamGlobalInWaitLimit3 and bcamGlobalInWaitLimit4 for opened applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.32 |
bcamTsapTabInWaitBuck5The number of times the input wait time was longer than
bcamGlobalInWaitLimit4 for opened applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.33 |
bcamTsapTabReactBuck1The number of times the application reaction time was in the time interval between
zero and bcamGlobalReactLimit1 for opened applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.34 |
bcamTsapTabReactBuck2The number of times the application reaction time was in the time interval between
bcamGlobalReactLimit1 and bcamGlobalReactLimit2 for opened applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.35 |
bcamTsapTabReactBuck3The number of times the application reaction time was in the time interval between
bcamGlobalReactLimit2 and bcamGlobalReactLimit3 for opened applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.36 |
bcamTsapTabReactBuck4The number of times the application reaction time was in the time interval between
bcamGlobalReactLimit3 and bcamGlobalReactLimit4 for opened applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.37 |
bcamTsapTabReactBuck5The number of times the application reaction time was longer than
bcamGlobalReactLimit4 for opened applications.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.38 |
bcamTsapTabTsduSendHistsThe number of packets to send given to BCAM at the TSAP by this application for meanwhile closed connections.ro Counter .1.3.6.1.4.1.231.2.17.5.22.1.39 |
bcamTsapTabByteSendHistsThe number of bytes to send given to BCAM at the TSAP by this application for meanwhile closed connections.ro Counter .1.3.6.1.4.1.231.2.17.5.22.1.40 |
bcamTsapTabTsduReceivedHistsThe number of packets received at the TSAP by this application for meanwhile closed connections.ro Counter .1.3.6.1.4.1.231.2.17.5.22.1.41 |
bcamTsapTabByteReceivedHistsThe number of bytes received at the TSAP by this application for meanwhile closed connections.ro Counter .1.3.6.1.4.1.231.2.17.5.22.1.42 |
bcamTsapTabSendCallOverMaxHistsThe number of send calls of this application while BCAM limits have been reached for meanwhile closed connections.ro Counter .1.3.6.1.4.1.231.2.17.5.22.1.43 |
bcamTsapTabLetterTimeoutHistsThe number of packets that were deleted without being delivered to the application due
to timeout of the letter timer for meanwhile closed connections.ro Counter .1.3.6.1.4.1.231.2.17.5.22.1.44 |
bcamTsapTabFunctionInterfacefunctionality of TSAP.
nea (1) : functionality according proprietary NEA .
iso (2) : functionality according ISO IS 8072.
streams (3) : functionality according the one defined in the INTERNET.ro Enumeration .1.3.6.1.4.1.231.2.17.5.22.1.45 |
bcamTsapTabCurrConnNumber of connections of this TSAP not in the connection state closed.ro Gauge .1.3.6.1.4.1.231.2.17.5.22.1.46 |
bcamTsapTabCloseConnsNumber of connections of this TSAP that have been opened and are now
in the connection state closing or closed.ro Counter .1.3.6.1.4.1.231.2.17.5.22.1.47 |
bcamTsapTabClessSendBytesNumber of bytes sent connectionless by this applicationro Counter .1.3.6.1.4.1.231.2.17.5.22.1.48 |
bcamTsapTabClessRecvBytesNumber of bytes received connectionless by this applicationro Counter .1.3.6.1.4.1.231.2.17.5.22.1.49 |
bcamTsapTabClessSendCallsNumber of successful send calls for connectionless dataro Counter .1.3.6.1.4.1.231.2.17.5.22.1.50 |
bcamTsapTabClessRecvCallsNumber of successful receive calls for connectionless dataro Counter .1.3.6.1.4.1.231.2.17.5.22.1.51 |
bcamTsapTabOutbufTsduThe number of packets to send connectionoriented that are currently buffered by BCAM for this application.ro Gauge -- ASSLEN: 1 .1.3.6.1.4.1.231.2.17.5.22.1.52 |
bcamTsapTabOutbufByteThe number of bytes to send connectionoriented that are currently buffered by BCAM for this application.ro Gauge -- ASSLEN: 3 .1.3.6.1.4.1.231.2.17.5.22.1.53 |
bcamTsapTabInbufTsduThe number of packets to receive connectionoriented that are currently buffered by BCAM for this application.ro Gauge -- ASSLEN: 1 .1.3.6.1.4.1.231.2.17.5.22.1.54 |
bcamTsapTabInbufByteThe number of bytes to receive connectionoriented that are currently buffered by BCAM for this application.ro Gauge -- ASSLEN: 3 .1.3.6.1.4.1.231.2.17.5.22.1.55 |
bcamTsapTabOutbufTsduClessThe number of packets to send connectionless that are currently buffered by BCAM for this application.ro Gauge -- ASSLEN: 1 .1.3.6.1.4.1.231.2.17.5.22.1.56 |
bcamTsapTabOutbufByteClessThe number of bytes to send connectionless that are currently buffered by BCAM for this application.ro Gauge -- ASSLEN: 3 .1.3.6.1.4.1.231.2.17.5.22.1.57 |
bcamTsapTabInbufTsduClessThe number of packets to receive connectionless that are currently buffered by BCAM for this application.ro Gauge -- ASSLEN: 1 .1.3.6.1.4.1.231.2.17.5.22.1.58 |
bcamTsapTabInbufByteClessThe number of bytes to receive connectionless that are currently buffered by BCAM for this application.ro Gauge -- ASSLEN: 3 .1.3.6.1.4.1.231.2.17.5.22.1.59 |
bcamTsapTabClessTimeoutThe number of packets discarded because the datagram timer elapsed.ro INTEGER .1.3.6.1.4.1.231.2.17.5.22.1.60 |
bcamCep OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.17.6 |
bcamCepCurrentThe number of connections in the state open.ro INTEGER .1.3.6.1.4.1.231.2.17.6.1 |
bcamCepClosedThe number of connections that had reached the state open and are now in the state closing or closed.ro INTEGER .1.3.6.1.4.1.231.2.17.6.2 |
bcamCepNotClosedThe number of connections in the states opening, open, or closing.ro INTEGER .1.3.6.1.4.1.231.2.17.6.3 |
bcamCepReroutingThe number of times an alternative route has been tried.ro INTEGER .1.3.6.1.4.1.231.2.17.6.4 |
bcamCepActiveTrialsThe number of active trials of connection establishment.ro Counter .1.3.6.1.4.1.231.2.17.6.5 |
bcamCepActiveTrialFailuresThe number of active trials of connection establishment that failed.ro Counter .1.3.6.1.4.1.231.2.17.6.6 |
bcamCepPassiveTrialsThe number of passive trials of connection establishment.ro Counter .1.3.6.1.4.1.231.2.17.6.7 |
bcamCepPassiveTrialFailuresThe number of passive trials of connection establishment that failed.ro Counter .1.3.6.1.4.1.231.2.17.6.8 |
bcamCepNumTableThe number of table entries.ro INTEGER .1.3.6.1.4.1.231.2.17.6.9 |
bcamCepTabTable of all active connections SEQUENCE OF ConnEntry .1.3.6.1.4.1.231.2.17.6.10 |
bcamCepTabEntryInformation about a connection ConnEntry .1.3.6.1.4.1.231.2.17.6.10.1 |
bcamCepTabProtocolClassThe protocol class used for this connection.
local (1) : the partner application resides in the same host.
nea (2) : the proprietary NEA protocol is used as transport protocol.
iso (3) : the ISO protocol is used as transport protocol.
tcp (4) : the TCP protocol is used as transport protocol.ro Enumeration .1.3.6.1.4.1.231.2.17.6.10.1.1 |
bcamCepTabConnectionNumbersThe definite identifier for this connection. Even if a connection is closed and then
reopened between the same applications, the identfier will get a new value.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.2 |
bcamCepTabDisconCommandFirst word that contains the reason for the closing of the connection (for diagnostic purposes only).ro OCTET STRING .1.3.6.1.4.1.231.2.17.6.10.1.3 |
bcamCepTabDisconInfoWordSecond word that contains the reason for the closing of the connection (for diagnostic purposes only).ro OCTET STRING .1.3.6.1.4.1.231.2.17.6.10.1.4 |
bcamCepTabTsduSendsThe number of packets to send given to BCAM at the TSAP for this connection.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.5 |
bcamCepTabByteSendsThe number of bytes to send given to BCAM at the TSAP for this connection.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.6 |
bcamCepTabTsduReceivedsThe number of packets received by BCAM for this connection.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.7 |
bcamCepTabByteReceivedsThe number of bytes received by BCAM for this connection.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.8 |
bcamCepTabSendCallOverMaxsThe number of send calls at the TSAP for this connection when connection specific
limits have been reached.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.9 |
bcamCepTabLetterTimeoutsThe number of packets that have been deleted without delivering to the application
due to the timeout of the letter timer.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.10 |
bcamCepTabOutbufTsduSendThe number of packets to send that are currently buffered by BCAM for this connection.ro Gauge -- ASSLEN: 1 .1.3.6.1.4.1.231.2.17.6.10.1.11 |
bcamCepTabOutbufByteSendThe number of bytes to send that are currently buffered by BCAM for this connection.ro Gauge -- ASSLEN: 3 .1.3.6.1.4.1.231.2.17.6.10.1.12 |
bcamCepTabOutbufMaxTsduSendThe maximum number of packets to send that will be buffered by BCAM for this connection.ro Gauge -- ASSLEN: 1 .1.3.6.1.4.1.231.2.17.6.10.1.13 |
bcamCepTabOutbufMaxByteSendThe maximum number of bytes to send that will be buffered by BCAM for this connection.ro Gauge -- ASSLEN: 3 .1.3.6.1.4.1.231.2.17.6.10.1.14 |
bcamCepTabInbufTsduThe number of packets to receive that are currently buffered by BCAM for this connection.ro Gauge -- ASSLEN: 1 .1.3.6.1.4.1.231.2.17.6.10.1.15 |
bcamCepTabInbufByteThe number of bytes to receive that are currently buffered by BCAM for this connection.ro Gauge -- ASSLEN: 3 .1.3.6.1.4.1.231.2.17.6.10.1.16 |
bcamCepTabInbufMaxTsduReceivedThe maximum number of packets to receive that will be buffered by BCAM for this connection.ro Gauge -- ASSLEN: 1 .1.3.6.1.4.1.231.2.17.6.10.1.17 |
bcamCepTabInbufMaxByteReceivedThe maximum number of bytes to receive that will be buffered by BCAM for this connection.ro Gauge -- ASSLEN: 3 .1.3.6.1.4.1.231.2.17.6.10.1.18 |
bcamCepTabPacketsDataSendsThe number of packets sent by BCAM that contained at least one byte of user data.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.19 |
bcamCepTabPacketsWindowSendsThe number of packets sent by BCAM that contained only window information.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.20 |
bcamCepTabPacketsDataReceivedsThe number of packets received by BCAM that contained at least one byte of user data.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.21 |
bcamCepTabPacketsWindowReceivedsThe number of packets received by BCAM that contained only window information.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.22 |
bcamCepTabGlobalZeroWindowSendsThe number of packets sent by BCAM that contained zero window due to global shortage of ressources.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.23 |
bcamCepTabConnectionZeroWindowSendsThe number of packets sent by BCAM that contained zero window due to shortage of connection specific ressources.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.24 |
bcamCepTabZeroWindowReceivedsThe number of packets received that contained zero window.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.25 |
bcamCepTabRoundTripTimeThe round trip time for this connection in milliseconds.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.26 |
bcamCepTabRetransmitPacketsSendsThe number of packets sent that contain at least one byte of data that have been already sent.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.27 |
bcamCepTabDetectedGapsReceivedsThe number of packets received where there is a gap between the highest already received byte
and the lowest byte in the packet.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.28 |
bcamCepTabDuplicatePacketsReceivedsThe number of packets received that contain at least one byte of user data which has already been
received.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.29 |
bcamCepTabErrorPacketsReceivedsThe number of packets received that were discarded because of weak protocol violations.ro Counter .1.3.6.1.4.1.231.2.17.6.10.1.30 |
bcamCepTabConnectionStateThe current state of the connection.
opening (1) : the connection establishment is in progress.
open (2) : the connection is ready for data transfer.
closing (3) : the connection is terminating.
closed (4) : the connection has been closed.ro Enumeration .1.3.6.1.4.1.231.2.17.6.10.1.31 |
bcamCepTabApplicationNumberThe definite identifier of the local application the connection belongs to.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.32 |
bcamCepTabRouteNumberThe definite identifier of the route that is used for the connection.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.33 |
bcamCepTabDurationThe time the connection was in the state open.ro Gauge .1.3.6.1.4.1.231.2.17.6.10.1.34 |
bcamCepTabDateConnectionEstablishmentThe date of the connection establishment.
Format: YYYYMMDDro DisplayString .1.3.6.1.4.1.231.2.17.6.10.1.35 |
bcamCepTabTimeConnectionEstablishmentThe time of the connection establishment.
Format: HHMMSSro DisplayString .1.3.6.1.4.1.231.2.17.6.10.1.36 |
bcamCepTabTypPartnerNameThe type of name used for the partner application.
neaName (1) : the name consists of 8 byte application name and 8 byte name of endsystem.
socketName (2) : the name consists of up to 32 byte socket name.
isoName (3) : the name consists of up to 78 byte iso name.ro Enumeration .1.3.6.1.4.1.231.2.17.6.10.1.37 |
bcamCepTabPartnerNameThe name of the partner application according the type of the name (bcamCepTabTypPartnerName).ro DisplayString .1.3.6.1.4.1.231.2.17.6.10.1.38 |
bcamCepTabLocalNameThe name of the local application according the type of the name (bcamCepTabTypPartnerName).ro DisplayString .1.3.6.1.4.1.231.2.17.6.10.1.39 |
bcamCepTabTypeL4AddrThe type of layer 4 addresses used for this connection.
portNumber (1) : the address consists of 2 byte port number.
neaTsel (2) : the address consists of 8 byte NEA transport selector.
osiTsel (3) : the address consists of up to 33 byte OSI transport selector.ro Enumeration .1.3.6.1.4.1.231.2.17.6.10.1.40 |
bcamCepTabL4AddrPartnerThe layer 4 address of the partner application according the type of the address (bcamCepTabTypeL4Addr).ro OCTET STRING .1.3.6.1.4.1.231.2.17.6.10.1.41 |
bcamCepTabL4AddrLocalThe layer 4 address of the partner application according the type of the address (bcamCepTabTypeL4Addr).ro OCTET STRING .1.3.6.1.4.1.231.2.17.6.10.1.42 |
bcamCepTabPartnerEndsystemThe name of the host where the partner application resides.ro DisplayString .1.3.6.1.4.1.231.2.17.6.10.1.43 |
bcamCepTabInWaitBuck1The number of times the input wait time was in the time interval between
zero and bcamGlobalInWaitLimit1.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.44 |
bcamCepTabInWaitBuck2The number of times the input wait time was in the time interval between
bcamGlobalInWaitLimit1 and bcamGlobalInWaitLimit2.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.45 |
bcamCepTabInWaitBuck3The number of times the input wait time was in the time interval between
bcamGlobalInWaitLimit2 and bcamGlobalInWaitLimit3.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.46 |
bcamCepTabInWaitBuck4The number of times the input wait time was in the time interval between
bcamGlobalInWaitLimit3 and bcamGlobalInWaitLimit4.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.47 |
bcamCepTabInWaitBuck5The number of times the input wait time was longer than
bcamGlobalInWaitLimit4.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.48 |
bcamCepTabReactBuck1The number of times the application reaction time was in the time interval between
zero and bcamGlobalReactLimit1.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.49 |
bcamCepTabReactBuck2The number of times the application reaction time was in the time interval between
bcamGlobalReactLimit1 and bcamGlobalReactLimit2.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.50 |
bcamCepTabReactBuck3The number of times the application reaction time was in the time interval between
bcamGlobalReactLimit2 and bcamGlobalReactLimit3ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.51 |
bcamCepTabReactBuck4The number of times the application reaction time was in the time interval between
bcamGlobalReactLimit3 and bcamGlobalReactLimit4.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.52 |
bcamCepTabReactBuck5The number of times the application reaction time was longer than
bcamGlobalReactLimit4.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.53 |
bcamCepTabOutProcBuck1The number of times the outbound processing time was in the time interval between
zero and bcamGlobalOutProcLimit1.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.54 |
bcamCepTabOutProcBuck2The number of times the outbound processing time was in the time interval between
bcamGlobalOutProcLimit1 and bcamGlobalOutProcLimit2.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.55 |
bcamCepTabOutProcBuck3The number of times the outbound processing time was in the time interval between
bcamGlobalOutProcLimit2 and bcamGlobalOutProcLimit3.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.56 |
bcamCepTabOutProcBuck4The number of times the outbound processing time was in the time interval between
bcamGlobalOutProcLimit3 and bcamGlobalOutProcLimit4.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.57 |
bcamCepTabOutProcBuck5The number of times the outbound processing time was longer than
bcamGlobalOutProcLimit4.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.58 |
bcamCepTabInProcBuck1The number of times the inbound processing time was in the time interval between
zero and bcamGlobalInProcLimit1.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.59 |
bcamCepTabInProcBuck2The number of times the inbound processing time was in the time interval between
bcamGlobalInProcLimit1 and bcamGlobalInProcLimit2.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.60 |
bcamCepTabInProcBuck3The number of times the inbound processing time was in the time interval between
bcamGlobalInProcLimit2 and bcamGlobalInProcLimit3.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.61 |
bcamCepTabInProcBuck4The number of times the inbound processing time was in the time interval between
bcamGlobalInProcLimit3 and bcamGlobalInProcLimit4.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.62 |
bcamCepTabInProcBuck5The number of times the inbound processing time was longer than
bcamGlobalInProcLimit4.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.63 |
bcamCepTabMaxSendLenThe maximum number of bytes per send call that can be given to BCAM at the interface.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.64 |
bcamCepTabMaxIndLenThe maximum number of bytes BCAM will announce per data indication.ro INTEGER .1.3.6.1.4.1.231.2.17.6.10.1.65 |
bcamCepTabLocalEndsystemThe name of the host where the local application resides.ro DisplayString .1.3.6.1.4.1.231.2.17.6.10.1.66 |
bcamRoute OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.17.7 |
bcamRouteNumTableThe number of all routes known by BCAMro INTEGER .1.3.6.1.4.1.231.2.17.7.1 |
bcamRouteActiveThe number of active routesro INTEGER .1.3.6.1.4.1.231.2.17.7.2 |
bcamRouteArpDefaultThe ARP state to use as default when a route of type node (bcamRouteTabTyp) is activated.
Several bits may be set simultaneous.
off (1) : No usage of ARP.
on (2) : periodic usage of ARP.
quiet (4) : ARP will only be used if no connection oriented data were transferred during the
last ARP period.ro Enumeration .1.3.6.1.4.1.231.2.17.7.3 |
bcamRouteRoutingReqIpThe number of forwarding requests for IPro INTEGER .1.3.6.1.4.1.231.2.17.7.4 |
bcamRouteRoutingReqIsoThe number of forwarding requests for ISOro INTEGER .1.3.6.1.4.1.231.2.17.7.5 |
bcamRouteRoutingReqNeaThe number of forwarding requests for NEAro INTEGER .1.3.6.1.4.1.231.2.17.7.6 |
bcamRouteSuccRoutingReqIpThe number of successful forwarding requests for IPro INTEGER .1.3.6.1.4.1.231.2.17.7.7 |
bcamRouteSuccRoutingReqIsoThe number of successful forwarding requests for ISOro INTEGER .1.3.6.1.4.1.231.2.17.7.8 |
bcamRouteSuccRoutingReqNeaThe number of successful forwarding requests for NEAro INTEGER .1.3.6.1.4.1.231.2.17.7.9 |
bcamRouteTabTable of all Routes SEQUENCE OF RoutEntry .1.3.6.1.4.1.231.2.17.7.10 |
bcamRouteTabEntryInformation about a route RoutEntry .1.3.6.1.4.1.231.2.17.7.10.1 |
bcamRouteTabNumbersThe definite identifier for this route.ro Counter .1.3.6.1.4.1.231.2.17.7.10.1.1 |
bcamRouteTabNameThe name of this route.ro DisplayString .1.3.6.1.4.1.231.2.17.7.10.1.2 |
bcamRouteTabNumNeaConnThe current number of NEA connections using this route.ro Gauge .1.3.6.1.4.1.231.2.17.7.10.1.3 |
bcamRouteTabNumIsoConnThe current number of ISO and TCP connections using this route.ro Gauge .1.3.6.1.4.1.231.2.17.7.10.1.4 |
bcamRouteTabMaxNeaConnThe maximum number of NEA connections allowed for this route.ro Gauge .1.3.6.1.4.1.231.2.17.7.10.1.5 |
bcamRouteTabMaxIsoConnThe maximum number of ISO and TCP connections allowed for this route.ro Gauge .1.3.6.1.4.1.231.2.17.7.10.1.6 |
bcamRouteTabBadNeaElemsThe number of erroneous NEA fragments received on this route.ro Counter .1.3.6.1.4.1.231.2.17.7.10.1.7 |
bcamRouteTabBadIsoElemsThe number of erroneous ISO and TCP fragments received on this route.ro Counter .1.3.6.1.4.1.231.2.17.7.10.1.8 |
bcamRouteTabMaxL4ConnThe maximum number of layer 4 connections per layer 3 connection for this route.ro Gauge .1.3.6.1.4.1.231.2.17.7.10.1.9 |
bcamRouteTabMaxUnackTpduThe maximum number of unacknowledged TPDUs per layer 3 connection that may be sent over this route.ro Gauge -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.7.10.1.10 |
bcamRouteTabRouteNetTypDescribes whether there are other intermediate routes necessary to be known by
BCAM to reach the system described by this route.
gatewayRouter (1) : the system is reached via a gateway route.
neaRouter (2) : the system is reached via a NEA router route.
intfIpRouter (4) : the system is reached via an INTF or IP router route.
int0Router (8) : the system is reached via an INT0 router route.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.11 |
bcamRouteTabNumberIsoIpRouterThe number of the route which describes the INT0, INTF or IP router used to
reach the system described by this route.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.12 |
bcamRouteTabNumberNeaRouterThe number of the route which describes the NEA router used to
reach the system described by this route.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.13 |
bcamRouteTabNumberGatewayThe number of the route which describes the gateway used to
reach the system described by this route.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.14 |
bcamRouteTabFunctionDescribes the function of the route:
onlyServerAccess (1) : the route is used for access to a specified server
port only.
transportRoute (2) : the route leads to an endsystem
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.15 |
bcamRouteTabProcNetTypDescribes whether there are other intermediate systems necessary to be known by
BCAM to reach the system described by this route.
gatewayProc (1) : an intermediate gateway system is used.
neaProc (2) : an intermediate NEA system is used.
isoIpProc (4) : an intermediate ISO or IP system is used.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.16 |
bcamRouteTabMaxTsduLenThe maximum length of packets that can be sent over this route.ro Gauge .1.3.6.1.4.1.231.2.17.7.10.1.17 |
bcamRouteTabNameEndsystemThe name of the remote system described by this route.ro DisplayString .1.3.6.1.4.1.231.2.17.7.10.1.18 |
bcamRouteTabIso4WindowTimerThe current value of the window timer for this route in seconds.ro Gauge -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.7.10.1.19 |
bcamRouteTabIso4RetransTimerThe current value of the retransmit timer for this route in seconds.ro Gauge -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.7.10.1.20 |
bcamRouteTabAckTimerThe current value of the acknowledgement timer for this route in seconds.ro Gauge -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.7.10.1.21 |
bcamRouteTabErrorRecovTimerThe current value of the error recovery timer for this route in seconds.ro Gauge -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.7.10.1.22 |
bcamRouteTabRejectTimerThe current value of the reject timer for this route in seconds.ro Gauge -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.7.10.1.23 |
bcamRouteTabExpedRetransTimerThe current value of the expedited retransmit timer for this route in seconds.ro Gauge -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.7.10.1.24 |
bcamRouteTabNameGatewayThe name of the intermediate system where protocol transitions, if necessary for this route, are done.ro DisplayString .1.3.6.1.4.1.231.2.17.7.10.1.25 |
bcamRouteTabNameX25StationThe name of the station which performs the X25 net access.ro DisplayString .1.3.6.1.4.1.231.2.17.7.10.1.26 |
bcamRouteTabL3InputProfilThe input profile used on the network layer.
nea (1) : proprietary NEAN protocol.
int0 (2) : protocol according ISO 8473 (inactive network layer).
intf (3) : protocol according ISO 8473.
gateway (4) : no network layer protocol used.
ip (5) : proctocol according RFC 791.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.27 |
bcamRouteTabTransStateThe current transfer state of this route as viewed by transport layer.
notReady (4) : no packets can be sent.
waitForTransferInit (1) : route may be initialised.
waitForReadyToTransfer (2) : address resolution running
ready (3) : packets may be sentro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.28 |
bcamRouteTabOptionThe currently valid options for this route (only valid for TCP).
delayedAckAllowed (1) : do not try do minimize the number of outgoing acknowledgements
optimalSegmentSizeOn (2) : do not try do minimize the number of incoming acknowledgements
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.29 |
bcamRouteTabTypDescribes how the remote system described by this route is reached.
direct (1) : the remote system is connected directly to the local system (e.g via DAST).
remote (2) : the remote system is reached via at least one router.
node (3) : the remote system is connected directly to ethernet or fddi node.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.30 |
bcamRouteTabUsageDescribes whether this route describes an intermediate system.
noIntermediate (16) : no intermediate route
gatewayRouter (1) : route describes an intermediate system used as gateway
intfIpRouter (2) : route describes an INTF or an IP router
neaRouter (4) : route describes a NEA router
int0Router (8) : route describes an INT0 router
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.31 |
bcamRouteTabL3Subprofilerfc1042 (1) : a layer 3 subprotocol according RFC1042 is used on this route.
netConnLess (2) : a connectionless layer 3 protocol is used on this route.
neaNetConn (4) : a NEA net connection is used on this route.
neattNetConn (8) : a NEATT net connection is used on this route.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.32 |
bcamRouteTabCommandStateThe current state of this route caused by route specific commands.
included (1) : a BCIN command was given successfully for this route.
active (2) : a BCACT command was given successfully for this route.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.33 |
bcamRouteTabChangeStateDescribes how the route was defined or modified.
generated (16) : the route has been defined by KOGS and not been modified.
dynamic (1) : the route was created dynamically by a BCIN command.
defByProtocol (2) : the route was defined by routing protocol.
switchByProtocol (4) : the route has been switched by routing protocol.
changed (8) : the route has been modified.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.34 |
bcamRouteTabIso9542Describes the ISO9542 processing, if this route is an INTF route
eshReceived (1) : endsystem hello received
ishReceived (2) : intermediate system hello received.
iso8473QueryReceived (4) : ISO 8473 query configuration request received.
refreshRequired (8) : refreshing of routing information is required.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.35 |
bcamRouteTabMaxNetLengthThe maximum length of a packet used on layer 3 (only valid for FDDI routes).
ethernet (1) : the length will be limited to the maximum length for ethernet.
fddi (2) : the length will be limited to the maximum length for FDDI.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.36 |
bcamRouteTabState2Describes the state of the route viewed by routing protocols.
silent (16) : route not yet or no more used.
testing (1) : delivery problems on route detected.
working (2) : route working.
waitAddressResolution (4) : waiting for address resolution.
lifetimeSupervsionFailed (8) : lifetime supervision failed.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.37 |
bcamRouteTabDeactReasonThe reason for the deactivation of the route.
flush (1) : an ISO9542 protocol element that requests the invalidation of
the routing information has been received.
supposedDown (2) : the route is supposed to be down (derived from state of TCP
protocol machine or ICMP message received).
noArpReply (4) : no arp reply has been received.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.38 |
bcamRouteTabSwitchTypeThe type of the last performed route switching.
localRemote (1) : the route has been changed from local to remote route.
remoteLocal (2) : the route has been changed from remote to local route.
remoteRemote (4) : the route has been changed from remote to remote route.
lsapChanged (8) : the route has been switched to another LSAPCB.
lanAddrChanged (16) : the lan address of the route has been changed.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.39 |
bcamRouteTabReasonCreationDescribes the reason for the automatic creation of the route.
incomingData (1) : the route has been created because of incoming data.
outgoingData (2) : the route has been created because of outgoing data.
routingProtocol (4) : the route has been created because of incoming routing protocol.
routingData (8) : the route has been created because of data to be routed.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.40 |
bcamRouteTabOrigLanAddressThe MAC address (if known) of the remote endsystem or the first intermediate
system of this route as used when the route has been created.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.7.10.1.41 |
bcamRouteTabLanAddressThe current MAC address (if known) of the remote endsystem or the first
intermediate system of this route.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.7.10.1.42 |
bcamRouteTabTypAddressThe type of address used for this route.
nea (1) : 2 byte (processor number and region number)
intf (2) : up to 20 byte full internet address
streams (3) : 4 byte IP address
int0 (4) : 6 byte MAC addressro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.43 |
bcamRouteTabLocalAddrThe layer 3 address of the local system described by this route according to bcamRouteTabTypAddress.ro OCTET STRING .1.3.6.1.4.1.231.2.17.7.10.1.44 |
bcamRouteTabRemoteAddrThe layer 3 address of the remote system described by this route according to bcamRouteTabTypAddress.ro OCTET STRING .1.3.6.1.4.1.231.2.17.7.10.1.45 |
bcamRouteTabOutPacketsDatasThe number of packets sent over this route that contained at least one byte of user data.ro Counter .1.3.6.1.4.1.231.2.17.7.10.1.46 |
bcamRouteTabOutPacketsFlowControlsThe number of packets sent over this route that contained only flow control information.ro Counter .1.3.6.1.4.1.231.2.17.7.10.1.47 |
bcamRouteTabInPacketsDatasThe number of packets received on this route that contained at least one byte of user data.ro Counter .1.3.6.1.4.1.231.2.17.7.10.1.48 |
bcamRouteTabInPacketsFlowControlsThe number of packets received on this route that contained only flow control information.ro Counter .1.3.6.1.4.1.231.2.17.7.10.1.49 |
bcamRouteTabOutRetransPacketsThe number of packets sent over this route that contained at least one byte of user data that
were already sent.ro Counter .1.3.6.1.4.1.231.2.17.7.10.1.50 |
bcamRouteTabInDetectedGapsThe number of packets received where there was a gap between the highest already received byte
and the lowest byte in the packet.ro Counter .1.3.6.1.4.1.231.2.17.7.10.1.51 |
bcamRouteTabInDuplicatedPacketsThe number of packets received that contained at least one byte of user data that has already been receivedro Counter .1.3.6.1.4.1.231.2.17.7.10.1.52 |
bcamRouteTabInIncorrectPacketsThe number of erroneous packets received on this route.ro Counter .1.3.6.1.4.1.231.2.17.7.10.1.53 |
bcamRouteTabRoundTripTimeClosedThe average round trip time on this route for meanwhile closed connections.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.54 |
bcamRouteTabRoundTripTimeCurrentThe average round trip time on this route for currently open connections.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.55 |
bcamRouteTabArpReqSendThe number of ARP requests sent for this route.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.56 |
bcamRouteTabArpRepSendThe number of ARP replies sent for this route.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.57 |
bcamRouteTabArpReqRecThe number of ARP requests received for this route.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.58 |
bcamRouteTabArpRepRecThe number of ARP replies received for this route.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.59 |
bcamRouteTabIcmpReqThe number of ICMP ECHO requests sent for this route.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.60 |
bcamRouteTabIcmpReplyThe number of ICMP ECHO replies received for this route.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.61 |
bcamRouteTabIcmpRedirectThe number of ICMP redirects received for this route.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.62 |
bcamRouteTabSwitchedThe number of route switchings performed for this route.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.63 |
bcamRouteTabDownThe number of times the state of the route has changed to not working.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.64 |
bcamRouteTabOspfHelloThe number of OSPF HELLOs received for this route.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.65 |
bcamRouteTabPacketNoConnThe number of packets received on this route that could not be assigned to a connection.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.66 |
bcamRouteTabPacketInternDisconThe number of packets received on this route that resulted in an abortion of a connection.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.67 |
bcamRouteTabPacketBadProtocolThe number of packets received on this route that were invalid.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.68 |
bcamRouteTabConnReqOutThe number of connection requests sent on this route.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.69 |
bcamRouteTabConnReqOutAckThe number of connection requests sent on this route that have been acknowledeged by the remote transport system.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.70 |
bcamRouteTabConnReqOutRejThe number of connection requests sent on this route that have been rejected by the remote transport system.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.71 |
bcamRouteTabConnReqInThe number of connection requests received on this route.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.72 |
bcamRouteTabConnReqInAckThe number of connection requests received on this route that have been acknowledged by the local transport system.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.73 |
bcamRouteTabConnReqInRejThe number of connection requests received on this route that have been rejected by the local transport system.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.74 |
bcamRouteTabDisconnOutThe number of disconnect requests sent.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.75 |
bcamRouteTabDisconnOutAckThe number of disconnect requests sent that have been acknowledged by the remote transport system.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.76 |
bcamRouteTabDisconnInThe number of disconnect requests received.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.77 |
bcamRouteTabDisconnInAckThe number of disconnect requests received that have been acknowledged by the local transport system.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.78 |
bcamRouteTabNumberLinkThe number of the interface that is used for this route.ro INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.79 |
bcamRouteTabArpFlagThe ARP state of the route.
off (1) : no usage of ARP.
on (2) : periodic usage of ARP.
quiet (4) : ARP will only be used if no connection oriented data were transferred during the
last ARP period.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.7.10.1.80 |
bcamRouteTabNsduLenThe length of a network service data unit used on this routero INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.81 |
bcamRouteTabMinNsduLenThe minimum maximal length of a network service data unit used on this routero INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.82 |
bcamRouteTabMaxNsduLenThe maximum maximal length of a network service data unit used on this routero INTEGER .1.3.6.1.4.1.231.2.17.7.10.1.83 |
bcamIf OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.17.8 |
bcamIfNumTablero INTEGER .1.3.6.1.4.1.231.2.17.8.1 |
bcamIfTabTable of all interfaces SEQUENCE OF LinkEntry .1.3.6.1.4.1.231.2.17.8.2 |
bcamIfTabEntryInformation about an interface LinkEntry .1.3.6.1.4.1.231.2.17.8.2.1 |
bcamIfTabNumbersA definite identifier for the interface.
Serves for references from other tablesro INTEGER -- ASSLEN: 2 .1.3.6.1.4.1.231.2.17.8.2.1.1 |
bcamIfTabNameThe name of this interfacero DisplayString .1.3.6.1.4.1.231.2.17.8.2.1.2 |
bcamIfTabProfileThe layer 2 profile of this interface
nealkp (1) : proprietary link protocol with permanent dialog.
nealke (2) : proprietary event driven link protocol to BS2000 system.
nealkeS (3) : proprietary event driven link protocol to System 6000.
nealkh (4) : a HDLC balanced link protocol (duplex mode).
llc1 (5) : CSMA/CD link protocol.
sinix (6) : proprietary link protocol to SINIX port.
fddi (7) : FDDI link protocol.ro Enumeration .1.3.6.1.4.1.231.2.17.8.2.1.3 |
bcamIfTabMnemonicWriteThe device mnemonic for write operationsro DisplayString .1.3.6.1.4.1.231.2.17.8.2.1.4 |
bcamIfTabMnemonicReadThe device mnemonic for read operationsro DisplayString .1.3.6.1.4.1.231.2.17.8.2.1.5 |
bcamIfTabLanAddressThe MAC address (if supported)ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.6 |
bcamIfTabConfigUpdateDescribes whether assigned routes are allowed to be switched from this to an alternative interface.
updateAllowed (4) : switching allowed
updateForbidden (1) : switching forbidden
primaryRequested (2) : switch back of all routes original assigned to this interface requested
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.8.2.1.7 |
bcamIfTabMaxLpduThe maximum length of a link protocol data unit depending on bcamIfTabProfile.
ethernet (1514) : 1514 bytes
fddi (4494) : 4494 bytes
atm (65535) : 65535 bytes
nealkh (65549) : 65549 bytes
nealkp (4113) : 4113 bytes
maxReass (16392) : 16392 bytesro Enumeration .1.3.6.1.4.1.231.2.17.8.2.1.8 |
bcamIfTabL2MonitoringThe state of the layer 2 monitoring.
on (1) : layer 2 monitoring is running.
off (2) : layer 2 monitoring is not running.ro Enumeration .1.3.6.1.4.1.231.2.17.8.2.1.9 |
bcamIfTabDeviceDescribes whether the interface is an ESCON channel to channel adapter.
esconCtc (1) : the interface is an ESCON channel to channel adapter.ro Enumeration .1.3.6.1.4.1.231.2.17.8.2.1.10 |
bcamIfTabAdminStateThe administrative state of this interface requested by commands.
excluded (4) : no BCIN command given
included (1) : BCIN command given
active (2) : BCACT command givenro Enumeration .1.3.6.1.4.1.231.2.17.8.2.1.11 |
bcamIfTabCurrentStateThe actual working state of this interface
none (8) : interface not working
waitForAct (1) : activation in progress
working (2) : interface working
waitForDeact (4) : deactivation in progress
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.8.2.1.12 |
bcamIfTabModeDescribes the operational parameters of this interface
stopModeOn (16) : stop PDN in case of abnormal deactivation
slowPollOn (8) : automatic reactivation shall be tried
shortWaitOn (4) : stop activation after timeout
multicastOn (2) : evaluate multicasts
broadcastOn (1) : evaluate broadcasts
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.8.2.1.13 |
bcamIfTabPortNameThe port name of this interfacero DisplayString .1.3.6.1.4.1.231.2.17.8.2.1.14 |
bcamIfTabLenTraceOutThe maximum length of layer 2 data to be traced in a trace entry for output.ro INTEGER .1.3.6.1.4.1.231.2.17.8.2.1.15 |
bcamIfTabLenTraceInThe maximum length of layer 2 data to be traced in a trace entry for input.ro INTEGER .1.3.6.1.4.1.231.2.17.8.2.1.16 |
bcamIfTabNumRouteSwitchingsThe number of route switchings performed for this interfacero INTEGER .1.3.6.1.4.1.231.2.17.8.2.1.17 |
bcamIfTabTimeLastChangeThe time interval (in seconds) since the last change of the working state of this interfacero INTEGER .1.3.6.1.4.1.231.2.17.8.2.1.18 |
bcamIfTabMnemonicDiagThe device mnemonic for diagnosis.ro DisplayString .1.3.6.1.4.1.231.2.17.8.2.1.19 |
bcamIfTabNumMulticastAddrThe number of multicast addresses enabled for this interface.ro INTEGER -- ASSLEN: 1 .1.3.6.1.4.1.231.2.17.8.2.1.20 |
bcamIfTabMulticastAddr1multicast address 1 or zeroro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.21 |
bcamIfTabMulticastAddr2multicast address 2ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.22 |
bcamIfTabMulticastAddr3multicast address 3ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.23 |
bcamIfTabMulticastAddr4multicast address 4ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.24 |
bcamIfTabMulticastAddr5multicast address 5ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.25 |
bcamIfTabMulticastAddr6multicast address 6ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.26 |
bcamIfTabMulticastAddr7multicast address 7ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.27 |
bcamIfTabMulticastAddr8multicast address 8ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.28 |
bcamIfTabMulticastAddr9multicast address 9ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.29 |
bcamIfTabMulticastAddr10multicast address 10ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.30 |
bcamIfTabNumNeaAddressThe number of NEA addresses enabled for this interface.ro INTEGER .1.3.6.1.4.1.231.2.17.8.2.1.31 |
bcamIfTabNeaAddress1NEA address 1ro OCTET STRING .1.3.6.1.4.1.231.2.17.8.2.1.32 |
bcamIfTabNeaAddress2NEA address 2ro OCTET STRING .1.3.6.1.4.1.231.2.17.8.2.1.33 |
bcamIfTabNeaAddress3NEA address 3ro OCTET STRING .1.3.6.1.4.1.231.2.17.8.2.1.34 |
bcamIfTabNeaAddress4NEA address 4ro OCTET STRING .1.3.6.1.4.1.231.2.17.8.2.1.35 |
bcamIfTabNeaAddress5NEA address 5ro OCTET STRING .1.3.6.1.4.1.231.2.17.8.2.1.36 |
bcamIfTabNeaAddress6NEA address 6ro OCTET STRING .1.3.6.1.4.1.231.2.17.8.2.1.37 |
bcamIfTabNumIpAddressThe number of IP addresses enabled for this interface.ro INTEGER .1.3.6.1.4.1.231.2.17.8.2.1.38 |
bcamIfTabIpAddress1IP address 1 or zeroro IpAddress .1.3.6.1.4.1.231.2.17.8.2.1.39 |
bcamIfTabIpAddress2IP address 2ro IpAddress .1.3.6.1.4.1.231.2.17.8.2.1.40 |
bcamIfTabIpAddress3IP address 3ro IpAddress .1.3.6.1.4.1.231.2.17.8.2.1.41 |
bcamIfTabIpAddress4IP address 4ro IpAddress .1.3.6.1.4.1.231.2.17.8.2.1.42 |
bcamIfTabIpAddress5IP address 5ro IpAddress .1.3.6.1.4.1.231.2.17.8.2.1.43 |
bcamIfTabIpAddress6IP address 6ro IpAddress .1.3.6.1.4.1.231.2.17.8.2.1.44 |
bcamIfTabNumInt0AddressThe number of INT0 addresses enabled for this interface.ro INTEGER .1.3.6.1.4.1.231.2.17.8.2.1.45 |
bcamIfTabInt0Address1INT0 address 1 or zeroro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.46 |
bcamIfTabInt0Address2INT0 address 2ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.47 |
bcamIfTabInt0Address3INT0 address 3ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.48 |
bcamIfTabInt0Address4INT0 address 4ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.49 |
bcamIfTabInt0Address5INT0 address 5ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.50 |
bcamIfTabInt0Address6INT0 address 6ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.231.2.17.8.2.1.51 |
bcamIfTabNumIntfAddressThe number of INTF addresses enabled for this interface.ro INTEGER .1.3.6.1.4.1.231.2.17.8.2.1.52 |
bcamIfTabIntfAddress1INTF address 1ro OCTET STRING .1.3.6.1.4.1.231.2.17.8.2.1.53 |
bcamIfTabIntfAddress2INTF address 2ro OCTET STRING .1.3.6.1.4.1.231.2.17.8.2.1.54 |
bcamIfTabIntfAddress3INTF address 3ro OCTET STRING .1.3.6.1.4.1.231.2.17.8.2.1.55 |
bcamIfTabIntfAddress4INTF address 4ro OCTET STRING .1.3.6.1.4.1.231.2.17.8.2.1.56 |
bcamIfTabIntfAddress5INTF address 5ro OCTET STRING .1.3.6.1.4.1.231.2.17.8.2.1.57 |
bcamIfTabIntfAddress6INTF address 6ro OCTET STRING .1.3.6.1.4.1.231.2.17.8.2.1.58 |
bcamIfTabBytesOutHighsThe number of bytes sent (high word, multiply by 4294967296)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.59 |
bcamIfTabBytesOutLowsThe number of bytes sent (low word, add to high word)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.60 |
bcamIfTabBytesInHighsThe number of bytes received (high word, multiply by 4294967296)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.61 |
bcamIfTabBytesInLowsThe number of bytes received (low word, add to high word)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.62 |
bcamIfTabIOsOutHighsThe number of IO operations for output (high word, multiply by 4294967296)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.63 |
bcamIfTabIOsOutLowsThe number of IO operations for output (low word, add to high word)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.64 |
bcamIfTabIOsInHighsThe number of IO operations for input (high word, multiply by 4294967296)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.65 |
bcamIfTabIOsInLowsThe number of IO operations for input (low word, add to high word)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.66 |
bcamIfTabOutputStopsThe number of times BCAM sent a RNR (Receive Not Ready) HDLC frame.ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.67 |
bcamIfTabInputStopsThe number of times BCAM received a RNR (Receive Not Ready) HDLC frame.ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.68 |
bcamIfTabIOErrorOutsThe number of IO errors for output operationsro Counter .1.3.6.1.4.1.231.2.17.8.2.1.69 |
bcamIfTabIOErrorInsThe number of IO errors for input operationsro Counter .1.3.6.1.4.1.231.2.17.8.2.1.70 |
bcamIfTabPacketsNotReceivedsThe number of packets not received due to receive not readyro Counter .1.3.6.1.4.1.231.2.17.8.2.1.71 |
bcamIfTabInPacketsLanHighsThe number of input packets (only valid for ethernet or FDDI) (high word, multiply by 4294967296)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.72 |
bcamIfTabInPacketsLanLowsThe number of input packets (only valid for ethernet or FDDI) (low word, add to high word)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.73 |
bcamIfTabOutPacketsLanHighsThe number of output packets (only valid for ethernet or FDDI) (high word, multiply by 4294967296)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.74 |
bcamIfTabOutPacketsLanLowsThe number of output packets (only valid for ethernet or FDDI) (low word, add to high word)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.75 |
bcamIfTabUnicastInHighsThe number of unicasts received (high word, multiply by 4294967296)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.76 |
bcamIfTabUnicastInLowsThe number of unicasts received (low word, add to high word)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.77 |
bcamIfTabUnicastOutHighsThe number of unicasts sent (high word, multiply by 4294967296)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.78 |
bcamIfTabUnicastOutLowsThe number of unicasts sent (low word, add to high word)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.79 |
bcamIfTabMulticastInHighsThe number of multicasts received (high word, multiply by 4294967296)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.80 |
bcamIfTabMulticastInLowsThe number of multicasts received (low word, add to high word)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.81 |
bcamIfTabMulticastOutHighsThe number of multicasts sent (high word, multiply by 4294967296)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.82 |
bcamIfTabMulticastOutLowsThe number of multicasts sent (low word, add to high word)ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.83 |
bcamIfTabErrorPacketInsThe number of erroneous packets received.ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.84 |
bcamIfTabErrorPacketOutsThe number of erroneous packets sent.ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.85 |
bcamIfTabDiscardInsThe number of packets received that were discarded.ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.86 |
bcamIfTabDiscardOutsThe number of packets that were discarded before sending.ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.87 |
bcamIfTabUnknownProtoInsThe number of packets received that were discarded because of unknown protocol.ro Counter .1.3.6.1.4.1.231.2.17.8.2.1.88 |
bcamIfTabTraceStateThe current state of the trace.
stopped (8) : the trace is not running.
running (1) : the trace is running.
save (2) : the trace is running and saved to a file.
hold (4) : the trace data will be kept in case of an error.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.8.2.1.89 |
bcamIfTabTraceNumberBufferThe number of buffers used for the tracero INTEGER .1.3.6.1.4.1.231.2.17.8.2.1.90 |
bcamIfTabTraceBufferLenThe length of one trace buffer in bytes (rounded up to multiples of 256).ro INTEGER .1.3.6.1.4.1.231.2.17.8.2.1.91 |
bcamRouter OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.17.9 |
bcamRouterNumTableThe number of table entries in the router tablero INTEGER .1.3.6.1.4.1.231.2.17.9.1 |
bcamRouterTabTable of all routers SEQUENCE OF RouterEntry .1.3.6.1.4.1.231.2.17.9.2 |
bcamRouterTabEntryInformation about a router RouterEntry .1.3.6.1.4.1.231.2.17.9.2.1 |
bcamRouterTabIpLowThe lower IP address limit of the IP address range reachable via this router.ro IpAddress .1.3.6.1.4.1.231.2.17.9.2.1.1 |
bcamRouterTabIpHighThe upper IP address limit of the IP address range reachable via this router.ro IpAddress .1.3.6.1.4.1.231.2.17.9.2.1.2 |
bcamRouterTabIpLocalThe local IP address used for this endsystem.ro IpAddress .1.3.6.1.4.1.231.2.17.9.2.1.3 |
bcamRouterTabIpRouterThe IP address of the routerro IpAddress .1.3.6.1.4.1.231.2.17.9.2.1.4 |
bcamRouterTabNumRouterThe route number of the router.ro INTEGER .1.3.6.1.4.1.231.2.17.9.2.1.5 |
bcamHost OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.17.10 |
bcamHostNumTableThe number of table entries in the host tablero INTEGER .1.3.6.1.4.1.231.2.17.10.1 |
bcamHostTabTable of all Hosts SEQUENCE OF HostEntry .1.3.6.1.4.1.231.2.17.10.2 |
bcamHostTabEntryInformation about a Host HostEntry .1.3.6.1.4.1.231.2.17.10.2.1 |
bcamHostTabNumberThe definite identifier for this host.ro INTEGER .1.3.6.1.4.1.231.2.17.10.2.1.1 |
bcamHostTabNameThe NEA name of the host.ro DisplayString .1.3.6.1.4.1.231.2.17.10.2.1.2 |
bcamHostTabSocketNameThe socket name of the host.ro DisplayString .1.3.6.1.4.1.231.2.17.10.2.1.3 |
bcamHostTabTypThe type of the host.
normal (1) : the host is the BCAM standard host.
virtual (2) : the host is a virtual host.ro Enumeration .1.3.6.1.4.1.231.2.17.10.2.1.4 |
bcamHostTabStateThe current state of the host:
active (1) : the host is working.
included (2) : the host is known by BCAM.
Several bits may be set simultaneous.ro Enumeration .1.3.6.1.4.1.231.2.17.10.2.1.5 |