BAY-STACK-LLDP-EXT-DOT3-MIB
AI MIB Summary
The BAY-STACK-LLDP-EXT-DOT3-MIB extends the standard LLDP-EXT-DOT3 MIB to monitor Layer 2 Ethernet link-layer attributes, specifically 802.3 link parameters such as port duplex modes, speed, and MAC/PHY statistics, on Bay Networks (now Nortel) Stackable Switches.
This MIB module is an extension to the standard LLDP-EXT-DOT3 MIB.
Main OID:
bayStackLldpXDot3Mib.bayStackMibs.47
20
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
20 total| Object Name |
|---|
bayStackLldpXDot3MibThis MIB module is an extension to the standard LLDP-EXT-DOT3 MIB. MODULE-IDENTITY .bayStackMibs.47 |
bsLldpXDot3Notifications OBJECT IDENTIFIER .bayStackMibs.47.0 |
bsLldpXDot3Objects OBJECT IDENTIFIER .bayStackMibs.47.1 |
bsLldpXdot3Config OBJECT IDENTIFIER .bayStackMibs.47.1.1 |
bsLldpXdot3LocalData OBJECT IDENTIFIER .bayStackMibs.47.1.2 |
bsLldpXdot3LocPowerTableThis table contains one row per port of PSE PoE
information on the local system known to this agent. SEQUENCE OF BsLldpXdot3LocPowerEntry .bayStackMibs.47.1.2.1 |
bsLldpXdot3LocPowerEntryInformation about a particular port PoE information. BsLldpXdot3LocPowerEntry .bayStackMibs.47.1.2.1.1 |
bsLldpXdot3LocPowerTypeA GET attribute that returns whether the local system is a PSE or
a PD and whether it is Type 1 or Type 2.ro Enumeration .bayStackMibs.47.1.2.1.1.1 |
bsLldpXdot3LocPowerSourceA GET attribute indicating the PSE Power Sources of the local system.
A PSE indicates whether it is being powered by a primary power
source; a backup power source; or unknown.
A value primaryPs(2) indicates that the device advertises its power source
as primary.
A value backupPs(3) indicates that the device advertises its power source
as backup.ro Enumeration .bayStackMibs.47.1.2.1.1.2 |
bsLldpXdot3LocPowerPriorityReflects the PD power priority that is being advertised on this
PSE port.
If both locally configure priority and
ldpXMedRemXPoEPDPowerPriority are available on this port, it is
a matter of local policy which one takes precedence. This object
reflects the active value on this port.
If the priority is not configured or known by the PD, the value
unknown(1) will be returned.
A value critical(2) indicates that the device advertises its power
Priority as critical, as per RFC 3621.
A value high(3) indicates that the device advertises its power
Priority as high, as per RFC 3621.
A value low(4) indicates that the device advertises its power
Priority as low, as per RFC 3621.ro Enumeration .bayStackMibs.47.1.2.1.1.3 |
bsLldpXdot3LocPDRequestedPowerValueA GET attribute that returns the PD requested power value. For a PSE,
it is the power value that the PSE mirrors back to the remote system.
This is the PD requested power value that was used by the PSE to
compute the power it has currently allocated to the remote system.
It is expressed in units of 0.1 watts.ro Integer32 .bayStackMibs.47.1.2.1.1.4 |
bsLldpXdot3LocPSEAllocatedPowerValueA GET attribute that returns the PSE allocated power value. For a PSE,
it is the power value that the PSE has currently allocated to the
remote system. The PSE allocated power value is the maximum input
average power that the PSE wants the PD to ever draw under this
allocation if it is accepted. It is expressed in units of 0.1 watts.ro Integer32 .bayStackMibs.47.1.2.1.1.5 |
bsLldpXdot3RemoteData OBJECT IDENTIFIER .bayStackMibs.47.1.3 |
bsLldpXdot3RemPowerTableThis table contains information about the PoE device type
as advertised by the remote system. SEQUENCE OF BsLldpXdot3RemPowerEntry .bayStackMibs.47.1.3.1 |
bsLldpXdot3RemPowerEntryInformation about a particular port component. BsLldpXdot3RemPowerEntry .bayStackMibs.47.1.3.1.1 |
bsLldpXdot3RemPowerTypeA GET attribute that returns whether the remote system is a PSE
or a PD and whether it is Type 1 or Type 2.ro Enumeration .bayStackMibs.47.1.3.1.1.1 |
bsLldpXdot3RemPowerSourceA GET attribute that returns the power sources of the remote system.
When the remote system is a PD, it indicates whether it is being
powered by: a PSE and locall; locally only; by a PSE only; or unknown.ro Enumeration .bayStackMibs.47.1.3.1.1.2 |
bsLldpXdot3RemPowerPriorityA GET operation returns the priority of the PD system received from
the remote system. For a PD, this is the priority that the remote
system has assigned to the PD.ro Enumeration .bayStackMibs.47.1.3.1.1.3 |
bsLldpXdot3RemPDRequestedPowerValueA GET attribute that for a PSE returs the the PD requested power value
received from the remote system. It is expressed in units of 0.1 watts.ro Integer32 .bayStackMibs.47.1.3.1.1.4 |
bsLldpXdot3RemPSEAllocatedPowerValueA GET attribute that for a PSE returns the PSE allocated power value
that was used by the remote system to compute the power value that it
has currently requested from the PSE. It is expressed in units of
0.1 watts.ro Integer32 .bayStackMibs.47.1.3.1.1.5 |