LLDP-EXT-DOT3-MIB
AI MIB Summary
The LLDP-EXT-DOT3-MIB module extends the Link Layer Discovery Protocol to expose IEEE 802.3-specific operational metrics, including port duplex modes, maximum frame sizes, and auto-negotiation status, via the Organizationally Defined TLV. This extension enables network management systems to monitor Layer 2 Ethernet link capabilities and physical layer parameters for compliant switches and network interface cards.
The LLDP Management Information Base extension module for IEEE 802.3 organizationally defined discovery information.
In order to assure the uniqueness of the LLDP-MIB, lldpXdot3MIB is branched from lldpExtensions using OUI value as the node. An OUI/'company_id' is a 24 bit globally unique assigned number referenced by various standards.
Copyright (C) IEEE (2004). This version of this MIB module is published as Annex G.6.1 of IEEE Std 802.1AB-2004; see the standard itself for full legal notices.
Main OID:
lldpXdot3MIB.1.3.6.1.4.1.3320.127.1.5.4623
53
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
53 total| Object Name |
|---|
lldpXdot3MIBThe LLDP Management Information Base extension module for
IEEE 802.3 organizationally defined discovery information.
In order to assure the uniqueness of the LLDP-MIB,
lldpXdot3MIB is branched from lldpExtensions using OUI value
as the node. An OUI/'company_id' is a 24 bit globally unique
assigned number referenced by various standards.
Copyright (C) IEEE (2004). This version of this MIB module
is published as Annex G.6.1 of IEEE Std 802.1AB-2004;
see the standard itself for full legal notices. MODULE-IDENTITY .1.3.6.1.4.1.3320.127.1.5.4623 |
lldpXdot3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.4623.1 |
lldpXdot3Config OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.4623.1.1 |
lldpXdot3PortConfigTableA table that controls selection of LLDP TLVs to be transmitted
on individual ports. SEQUENCE OF LldpXdot3PortConfigEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.1.1 |
lldpXdot3PortConfigEntryLLDP configuration information that controls the
transmission of IEEE 802.3 organizationally defined TLVs on
LLDP transmission capable ports.
This configuration object augments the lldpPortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpPortConfigEntry
entry.
Each active lldpXdot3PortConfigEntry must be from non-volatile
storage (along with the corresponding lldpPortConfigEntry)
after a re-initialization of the management system. LldpXdot3PortConfigEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.1.1.1 |
lldpXdot3PortConfigTLVsTxEnableThe lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap,
includes the IEEE 802.3 organizationally defined set of LLDP
TLVs whose transmission is allowed on the local LLDP agent by
the network management. Each bit in the bitmap corresponds
to an IEEE 802.3 subtype associated with a specific IEEE
802.3 optional TLV. The bit 0 is not used since there is
no corresponding subtype.
The bit 'macPhyConfigStatus(0)' indicates that LLDP agent
should transmit 'MAC/PHY configuration/status TLV'.
The bit 'powerViaMDI(1)' indicates that LLDP agent should
transmit 'Power via MDI TLV'.
The bit 'linkAggregation(2)' indicates that LLDP agent should
transmit 'Link Aggregation TLV'.
The bit 'maxFrameSize(3)' indicates that LLDP agent should
transmit 'Maximum-frame-size TLV'.
The default value for lldpXdot3PortConfigTLVsTxEnable object
is an empty set, which means no enumerated values are set.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw Bits .1.3.6.1.4.1.3320.127.1.5.4623.1.1.1.1.1 |
lldpXdot3LocalData OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.4623.1.2 |
lldpXdot3LocPortTableThis table contains one row per port of Ethernet port
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpXdot3LocPortEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.2.1 |
lldpXdot3LocPortEntryInformation about a particular port component. LldpXdot3LocPortEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.2.1.1 |
lldpXdot3LocPortAutoNegSupportedThe truth value used to indicate whether the given port
(associated with the local system) supports Auto-negotiation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.4623.1.2.1.1.1 |
lldpXdot3LocPortAutoNegEnabledThe truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the local system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.4623.1.2.1.1.2 |
lldpXdot3LocPortAutoNegAdvertisedCapThis object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
local system.ro OCTET STRING .1.3.6.1.4.1.3320.127.1.5.4623.1.2.1.1.3 |
lldpXdot3LocPortOperMauTypeAn integer value that indicates the operational MAU type
of the given port on the local system.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero.ro Integer32 .1.3.6.1.4.1.3320.127.1.5.4623.1.2.1.1.4 |
lldpXdot3LocPowerTableThis table contains one row per port of power ethernet
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpXdot3LocPowerEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.2.2 |
lldpXdot3LocPowerEntryInformation about a particular port component. LldpXdot3LocPowerEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.2.2.1 |
lldpXdot3LocPowerPortClassThe value that identifies the port Class of the given port
associated with the local system.ro LldpPowerPortClass .1.3.6.1.4.1.3320.127.1.5.4623.1.2.2.1.1 |
lldpXdot3LocPowerMDISupportedThe truth value used to indicate whether the MDI power is
supported on the given port associated with the local system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.4623.1.2.2.1.2 |
lldpXdot3LocPowerMDIEnabledThe truth value used to identify whether MDI power is
enabled on the given port associated with the local system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.4623.1.2.2.1.3 |
lldpXdot3LocPowerPairControlableThe truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with the
local system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.4623.1.2.2.1.4 |
lldpXdot3LocPowerPairsThis object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the local system.ro Integer32(1|2) .1.3.6.1.4.1.3320.127.1.5.4623.1.2.2.1.5 |
lldpXdot3LocPowerClassThis object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
local system.ro Integer32(1|2|3|4|5) .1.3.6.1.4.1.3320.127.1.5.4623.1.2.2.1.6 |
lldpXdot3LocLinkAggTableThis table contains one row per port of link aggregation
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpXdot3LocLinkAggEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.2.3 |
lldpXdot3LocLinkAggEntryLink Aggregation information about a particular port
component. LldpXdot3LocLinkAggEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.2.3.1 |
lldpXdot3LocLinkAggStatusThe bitmap value contains the link aggregation capabilities
and the current aggregation status of the link.ro LldpLinkAggStatusMap .1.3.6.1.4.1.3320.127.1.5.4623.1.2.3.1.1 |
lldpXdot3LocLinkAggPortIdThis object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component in link aggregation.
If the port is not in link aggregation state and/or it
does not support link aggregation, this value should be set
to zero.ro Integer32(0|1..2147483647) .1.3.6.1.4.1.3320.127.1.5.4623.1.2.3.1.2 |
lldpXdot3LocMaxFrameSizeTableThis table contains one row per port of maximum frame
size information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpXdot3LocMaxFrameSizeEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.2.4 |
lldpXdot3LocMaxFrameSizeEntryMaximum Frame Size information about a particular port
component. LldpXdot3LocMaxFrameSizeEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.2.4.1 |
lldpXdot3LocMaxFrameSizeAn integer value indicating the maximum supported frame
size in octets on the given port of the local system.ro Integer32 .1.3.6.1.4.1.3320.127.1.5.4623.1.2.4.1.1 |
lldpXdot3RemoteData OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.4623.1.3 |
lldpXdot3RemPortTableThis table contains Ethernet port information (as a part
of the LLDP 802.3 organizational extension) of the remote
system. SEQUENCE OF LldpXdot3RemPortEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.3.1 |
lldpXdot3RemPortEntryInformation about a particular physical network connection. LldpXdot3RemPortEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.3.1.1 |
lldpXdot3RemPortAutoNegSupportedThe truth value used to indicate whether the given port
(associated with remote system) supports Auto-negotiation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.4623.1.3.1.1.1 |
lldpXdot3RemPortAutoNegEnabledThe truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.4623.1.3.1.1.2 |
lldpXdot3RemPortAutoNegAdvertisedCapThis object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
remote system.ro OCTET STRING .1.3.6.1.4.1.3320.127.1.5.4623.1.3.1.1.3 |
lldpXdot3RemPortOperMauTypeAn integer value that indicates the operational MAU type
of the sending device.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed in
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero.ro Integer32 .1.3.6.1.4.1.3320.127.1.5.4623.1.3.1.1.4 |
lldpXdot3RemPowerTableThis table contains Ethernet power information (as a part
of the LLDP 802.3 organizational extension) of the remote
system. SEQUENCE OF LldpXdot3RemPowerEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.3.2 |
lldpXdot3RemPowerEntryInformation about a particular physical network connection. LldpXdot3RemPowerEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.3.2.1 |
lldpXdot3RemPowerPortClassThe value that identifies the port Class of the given port
associated with the remote system.ro LldpPowerPortClass .1.3.6.1.4.1.3320.127.1.5.4623.1.3.2.1.1 |
lldpXdot3RemPowerMDISupportedThe truth value used to indicate whether the MDI power
is supported on the given port associated with the remote
system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.4623.1.3.2.1.2 |
lldpXdot3RemPowerMDIEnabledThe truth value used to identify whether MDI power is
enabled on the given port associated with the remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.4623.1.3.2.1.3 |
lldpXdot3RemPowerPairControlableThe truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with the
remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.4623.1.3.2.1.4 |
lldpXdot3RemPowerPairsThis object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the remote system.ro Integer32(1|2) .1.3.6.1.4.1.3320.127.1.5.4623.1.3.2.1.5 |
lldpXdot3RemPowerClassThis object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
remote system.ro Integer32(1|2|3|4|5) .1.3.6.1.4.1.3320.127.1.5.4623.1.3.2.1.6 |
lldpXdot3RemLinkAggTableThis table contains port link aggregation information
(as a part of the LLDP 802.3 organizational extension)
of the remote system. SEQUENCE OF LldpXdot3RemLinkAggEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.3.3 |
lldpXdot3RemLinkAggEntryLink Aggregation information about remote system's port
component. LldpXdot3RemLinkAggEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.3.3.1 |
lldpXdot3RemLinkAggStatusThe bitmap value contains the link aggregation capabilities
and the current aggregation status of the link.ro LldpLinkAggStatusMap .1.3.6.1.4.1.3320.127.1.5.4623.1.3.3.1.1 |
lldpXdot3RemLinkAggPortIdThis object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component associated with the remote system.
If the remote port is not in link aggregation state and/or
it does not support link aggregation, this value should be
zero.ro Integer32(0|1..2147483647) .1.3.6.1.4.1.3320.127.1.5.4623.1.3.3.1.2 |
lldpXdot3RemMaxFrameSizeTableThis table contains one row per port of maximum frame
size information (as a part of the LLDP 802.3 organizational
extension) of the remote system. SEQUENCE OF LldpXdot3RemMaxFrameSizeEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.3.4 |
lldpXdot3RemMaxFrameSizeEntryMaximum Frame Size information about a particular port
component. LldpXdot3RemMaxFrameSizeEntry .1.3.6.1.4.1.3320.127.1.5.4623.1.3.4.1 |
lldpXdot3RemMaxFrameSizeAn integer value indicating the maximum supported frame
size in octets on the port component associated with the
remote system.ro Integer32 .1.3.6.1.4.1.3320.127.1.5.4623.1.3.4.1.1 |
lldpXdot3Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.4623.2 |
lldpXdot3Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.4623.2.1 |
lldpXdot3Groups OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.4623.2.2 |