NMS-QOS-PIB-MIB
The NMS QOS Policy PIB for provisioning QOS policy.
Main OID:
nmsQosPIBMIB.1.3.6.1.4.1.3320.18.2.1
161
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
161 total| Object Name |
|---|
nmsQosPIBMIBThe NMS QOS Policy PIB for provisioning QOS policy. MODULE-IDENTITY .1.3.6.1.4.1.3320.18.2.1 |
qosPIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.3320.18.2.1.1 |
qosPIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.3320.18.2.1.1.1 |
qosPIBComplianceThe compliance statement for the QOS Policy Derived MIB. Unknown .1.3.6.1.4.1.3320.18.2.1.1.1.1 |
qosPIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.3320.18.2.1.1.2 |
qosDevicePibIncarnationTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.1 |
qosDeviceAttributeTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.2 |
qosInterfaceTypeTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.3 |
qosDiffServMappingTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.4 |
qosCosToDscpTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.5 |
qosUnmatchedPolicyTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.6 |
qosPolicerTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.7 |
qosAggregateTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.8 |
qosMacClassificationTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.9 |
qosIpAceTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.10 |
qosIpAclDefinitionTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.11 |
qosIpAclActionTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.12 |
qosIfSchedulingPreferencesTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.13 |
qosIfDropPreferenceTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.14 |
qosIfDscpAssignmentTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.15 |
qosIfRedTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.16 |
qosIfTailDropTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.17 |
qosIfWeightsTableGroup Unknown .1.3.6.1.4.1.3320.18.2.1.1.2.18 |
qosDeviceConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3320.18.2.1.2 |
qosDevicePibIncarnationTableThis class contains a single policy instance that identifies the current incarnation of the PIB and the PDP that installed this incarnation. The instance of this class is reported to the PDP at client connect time so that the PDP can (attempt to) ascertain the current state of the PIB. SEQUENCE OF QosDevicePibIncarnationEntry .1.3.6.1.4.1.3320.18.2.1.2.1 |
qosDevicePibIncarnationEntryThe single policy instance of this class identifies the current incarnation of the PIB and the PDP that installed this incarnation. QosDevicePibIncarnationEntry .1.3.6.1.4.1.3320.18.2.1.2.1.1 |
qosDeviceIncarnationIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.2.1.1.1 |
qosDevicePdpNameThe name of the PDP that installed the current incarnation of the PIB into the device. By default it is the zero length string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3320.18.2.1.2.1.1.2 |
qosDevicePibIncarnationAn octet string to identify the current incarnation. It has meaning to the PDP that installed the PIB and perhaps its standby PDPs. By default the empty string.ro OCTET STRING .1.3.6.1.4.1.3320.18.2.1.2.1.1.3 |
qosDevicePibTtlThe number of seconds after a client close or TCP timeout for which the PEP continues to enforce the policy in the PIB. After this interval, the PIB is consired expired and the device no longer enforces the policy installed in the PIB.ro Unsigned32 (NMS-TC) .1.3.6.1.4.1.3320.18.2.1.2.1.1.4 |
qosDeviceAttributeTableThe single instance of this class indicates specific attributes of the device. These include configuration values such as the configured PDP addresses, the maximum message size, and specific device capabilities. The latter include input port-based and output port-based classification and/or policing, support for flow based policing, aggregate based policing, traffic shaping capabilities, etc. SEQUENCE OF QosDeviceAttributeEntry .1.3.6.1.4.1.3320.18.2.1.2.2 |
qosDeviceAttributeEntryThe single instance of this class indicates specific attributes of the device. QosDeviceAttributeEntry .1.3.6.1.4.1.3320.18.2.1.2.2.1 |
qosDeviceAttributeIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.2.2.1.1 |
qosDevicePepDomainThe QoS domain that this device belongs to. This is configured locally on the device (perhaps by some management protocol such as SNMP). By default, it is the zero-length string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3320.18.2.1.2.2.1.2 |
qosDevicePrimaryPdpThe address of the PDP configured to be the primary PDP for the device.ro IpAddress .1.3.6.1.4.1.3320.18.2.1.2.2.1.3 |
qosDeviceSecondaryPdpThe address of the PDP configured to be the secondary PDP for the device. An address of zero indicates no secondary is configured.ro IpAddress .1.3.6.1.4.1.3320.18.2.1.2.2.1.4 |
qosDeviceMaxMessageSizeThe maximum size message that this PEP is capable of receiving in bytes. A value of zero means that the maximum message size is unspecified (but does not mean it is unlimited). A message greater than this maximum results in a MessageTooBig error on a 'no commit' REP.ro Unsigned32 (NMS-TC) .1.3.6.1.4.1.3320.18.2.1.2.2.1.5 |
qosDeviceCapabilitiesAn enumeration of device capabilities. Used by the PDP to select policies and configuration to push to the PEP.ro Bits .1.3.6.1.4.1.3320.18.2.1.2.2.1.6 |
qosInterfaceTypeTableThis class describes the interface types of the interfaces that exist on the device. It includes the queue type, role combination and capabilities of interfaces. The PEP does not report which specific interfaces have which characteristics. SEQUENCE OF QosInterfaceTypeEntry .1.3.6.1.4.1.3320.18.2.1.2.3 |
qosInterfaceTypeEntryAn instance of this class describes a role combination for an interface type of an interface that exists on the device. QosInterfaceTypeEntry .1.3.6.1.4.1.3320.18.2.1.2.3.1 |
qosInterfaceTypeIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.2.3.1.1 |
qosInterfaceQueueTypeThe interface type in terms of number of queues and thresholds.ro QosInterfaceQueueType .1.3.6.1.4.1.3320.18.2.1.2.3.1.2 |
qosInterfaceTypeRolesA combination of roles on at least one interface of type qosInterfaceType.ro RoleCombination .1.3.6.1.4.1.3320.18.2.1.2.3.1.3 |
qosInterfaceTypeCapabilitiesAn enumeration of interface capabilities. Used by the PDP to select policies and configuration to push to the PEP.ro QosInterfaceTypeCapabilities .1.3.6.1.4.1.3320.18.2.1.2.3.1.4 |
qosDomainConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3320.18.2.1.3 |
qosDiffServMappingTableMaps each DSCP to a marked-down DSCP. Also maps each DSCP to an IP precedence and QosLayer2Cos. When configured for the first time, all 64 entries of the table must be specified. Thereafter, instances may be modified (with a delete and install in a single decision) but not deleted unless all instances are deleted. SEQUENCE OF QosDiffServMappingEntry .1.3.6.1.4.1.3320.18.2.1.3.1 |
qosDiffServMappingEntryAn instance of this class represents mappings from a DSCP. QosDiffServMappingEntry .1.3.6.1.4.1.3320.18.2.1.3.1.1 |
qosDscpA DSCP for which this entry contains mappings. Dscp .1.3.6.1.4.1.3320.18.2.1.3.1.1.1 |
qosMarkedDscpThe DSCP to use instead of the qosDscp when the packet is out of profile and hence marked as such.ro Dscp .1.3.6.1.4.1.3320.18.2.1.3.1.1.2 |
qosL2CosThe L2 CoS value to use when mapping this DSCP to layer 2 CoS.ro QosLayer2Cos .1.3.6.1.4.1.3320.18.2.1.3.1.1.3 |
qosCosToDscpTableMaps each of eight CoS values to a DSCP. When configured for the first time, all 8 entries of the table must be specified. Thereafter, instances may be modified (with a delete and install in a single decision) but not deleted unless all instances are deleted. SEQUENCE OF QosCosToDscpEntry .1.3.6.1.4.1.3320.18.2.1.3.2 |
qosCosToDscpEntryAn instance of this class maps a CoS value to a DSCP. QosCosToDscpEntry .1.3.6.1.4.1.3320.18.2.1.3.2.1 |
qosCosToDscpCosThe L2 CoS value that is being mapped. QosLayer2Cos .1.3.6.1.4.1.3320.18.2.1.3.2.1.1 |
qosCosToDscpDscpThe DSCP value to use when mapping the L2 CoS to a DSCP.ro Dscp .1.3.6.1.4.1.3320.18.2.1.3.2.1.2 |
qosUnmatchedPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.3320.18.2.1.4 |
qosUnmatchedPolicyTableA policy class that specifies what QoS to apply to a packet that does not match any other policy configured for this role combination for a particular direction of traffic. SEQUENCE OF QosUnmatchedPolicyEntry .1.3.6.1.4.1.3320.18.2.1.4.1 |
qosUnmatchedPolicyEntryAn instance of this class specifies the unmatched policy for a particular role combination for incoming or outgoing traffic. QosUnmatchedPolicyEntry .1.3.6.1.4.1.3320.18.2.1.4.1.1 |
qosUnmatchedPolicyIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.4.1.1.1 |
qosUnmatchedPolicyRoleRole combination for which this instance applies.ro RoleCombination .1.3.6.1.4.1.3320.18.2.1.4.1.1.2 |
qosUnmatchedPolicyDirectionThe direction of packet flow at the interface in question to which this instance applies.ro Enumeration .1.3.6.1.4.1.3320.18.2.1.4.1.1.3 |
qosUnmatchedPolicyDscpThe DSCP to classify the unmatched packet with. This must be specified even if qosUnmatchedPolicyDscpTrusted is true.ro Dscp .1.3.6.1.4.1.3320.18.2.1.4.1.1.4 |
qosUnmatchedPolicyDscpTrustedIf this attribute is true, then the Dscp associated with the packet is trusted, i.e., it is assumed to have already been set. In this case, the Dscp is not rewritten with qosUnmatchedPolicyDscp (qosUnmatchedPolicyDscp is ignored) unless this is a non-IP packet and arrives untagged. The packet is still policed as part of its micro flow and its aggregate flow. When a trusted action is applied to an input interface, the Dscp (for an IP packet) or CoS (for a non-IP packet) associated with the packet is the one contained in the packet. When a trusted action is applied to an output interface, the Dscp associated with the packet is the one that is the result of the input classification and policing.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.18.2.1.4.1.1.5 |
qosUnmatchPolMicroFlowPolicerIdAn index identifying the instance of policer to apply to unmatched packets. It must correspond to the integer index of an instance of class qosPolicerTable or be zero. If zero, the microflow is not policed.ro PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.4.1.1.6 |
qosUnmatchedPolicyAggregateIdAn index identifying the aggregate that the packet belongs to. It must correspond to the integer index of an instance of class qosAggregateTable or be zero. If zero, the microflow does not belong to any aggregate and is not policed as part of any aggregate.ro PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.4.1.1.7 |
qosPolicer OBJECT IDENTIFIER .1.3.6.1.4.1.3320.18.2.1.5 |
qosPolicerTableA class specifying policing parameters for both microflows and aggregate flows. This table is designed for policing according to a token bucket scheme where an average rate and burst size is specified. SEQUENCE OF QosPolicerEntry .1.3.6.1.4.1.3320.18.2.1.5.1 |
qosPolicerEntryAn instance of this class specifies a set of policing parameters. QosPolicerEntry .1.3.6.1.4.1.3320.18.2.1.5.1.1 |
qosPolicerIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.5.1.1.1 |
qosPolicerRateThe token rate. It is specified in units of bit/s. A rate of zero means that all packets will be out of profile. If the qosPolicerAction is set to drop then this effectively denies any service to packets policed by this policer.ro Unsigned64 .1.3.6.1.4.1.3320.18.2.1.5.1.1.2 |
qosPolicerNormalBurstThe normal size of a burst in terms of bits.ro Unsigned32 (NMS-TC) .1.3.6.1.4.1.3320.18.2.1.5.1.1.3 |
qosPolicerExcessBurstThe excess size of a burst in terms of bits.ro Unsigned32 (NMS-TC) .1.3.6.1.4.1.3320.18.2.1.5.1.1.4 |
qosPolicerActionAn indication of how to handle out of profile packets. When the shape action is chosen then traffic is shaped to the rate specified by qosPolicerRate.ro Enumeration .1.3.6.1.4.1.3320.18.2.1.5.1.1.5 |
qosAggregateTableInstances of this class identify aggregate flows and the policer to apply to each. SEQUENCE OF QosAggregateEntry .1.3.6.1.4.1.3320.18.2.1.5.2 |
qosAggregateEntryAn instance of this class specifies the policer to apply to an aggregate flow. QosAggregateEntry .1.3.6.1.4.1.3320.18.2.1.5.2.1 |
qosAggregateIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.5.2.1.1 |
qosAggregatePolicerIdAn index identifying the instance of policer to apply to the aggregate. It must correspond to the integer index of an instance of class qosPolicerTable.ro PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.5.2.1.2 |
qosMacQos OBJECT IDENTIFIER .1.3.6.1.4.1.3320.18.2.1.6 |
qosMacClassificationTableA class of MAC/Vlan tuples and their associated CoS values. SEQUENCE OF QosMacClassificationEntry .1.3.6.1.4.1.3320.18.2.1.6.1 |
qosMacClassificationEntryAn instance of this class specifies the mapping of a VLAN and a MAC address to a CoS value. QosMacClassificationEntry .1.3.6.1.4.1.3320.18.2.1.6.1.1 |
qosMacClassificationIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.6.1.1.1 |
qosDstMacVlanThe VLAN of the destination MAC address of the L2 frame.ro INTEGER .1.3.6.1.4.1.3320.18.2.1.6.1.1.2 |
qosDstMacAddressThe destination MAC address of the L2 frame.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3320.18.2.1.6.1.1.3 |
qosDstMacCosThe CoS to assign the packet with the associated MAC/VLAN tuple. Note that this CoS is overridden by the policies to classify the frame at layer 3 if there are any.ro QosLayer2Cos .1.3.6.1.4.1.3320.18.2.1.6.1.1.4 |
qosIpQos OBJECT IDENTIFIER .1.3.6.1.4.1.3320.18.2.1.7 |
qosIpAceTableACE definitions. SEQUENCE OF QosIpAceEntry .1.3.6.1.4.1.3320.18.2.1.7.1 |
qosIpAceEntryAn instance of this class specifies an ACE. QosIpAceEntry .1.3.6.1.4.1.3320.18.2.1.7.1.1 |
qosIpAceIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.7.1.1.1 |
qosIpAceDstAddrThe IP address to match against the packet's destination IP address.ro IpAddress .1.3.6.1.4.1.3320.18.2.1.7.1.1.2 |
qosIpAceDstAddrMaskA mask for the matching of the destination IP address.ro IpAddress .1.3.6.1.4.1.3320.18.2.1.7.1.1.3 |
qosIpAceSrcAddrThe IP address to match against the packet's source IP address.ro IpAddress .1.3.6.1.4.1.3320.18.2.1.7.1.1.4 |
qosIpAceSrcAddrMaskA mask for the matching of the source IP address.ro IpAddress .1.3.6.1.4.1.3320.18.2.1.7.1.1.5 |
qosIpAceDscpMinThe minimum value that the DSCP in the packet can have and match this ACE.ro Dscp .1.3.6.1.4.1.3320.18.2.1.7.1.1.6 |
qosIpAceDscpMaxThe maximum value that the DSCP in the packet can have and match this ACE.ro Dscp .1.3.6.1.4.1.3320.18.2.1.7.1.1.7 |
qosIpAceProtocolThe IP protocol to match against the packet's protocol. A value of zero means match all.ro INTEGER .1.3.6.1.4.1.3320.18.2.1.7.1.1.8 |
qosIpAceDstL4PortMinThe minimum value that the packet's layer 4 dest port number can have and match this ACE.ro INTEGER .1.3.6.1.4.1.3320.18.2.1.7.1.1.9 |
qosIpAceDstL4PortMaxThe maximum value that the packet's layer 4 dest port number can have and match this ACE.ro INTEGER .1.3.6.1.4.1.3320.18.2.1.7.1.1.10 |
qosIpAceSrcL4PortMinThe minimum value that the packet's layer 4 source port number can have and match this ACE.ro INTEGER .1.3.6.1.4.1.3320.18.2.1.7.1.1.11 |
qosIpAceSrcL4PortMaxThe maximum value that the packet's layer 4 source port number can have and match this ACE.ro INTEGER .1.3.6.1.4.1.3320.18.2.1.7.1.1.12 |
qosIpAcePermitIf the packet matches this ACE and the value of this attribute is true, then the matching process terminates and the QoS associated with this ACE (indirectly through the ACL) is applied to the packet. If the value of this attribute is false, then no more ACEs in this ACL are compared to this packet and matching continues with the first ACE of the next ACL.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.18.2.1.7.1.1.13 |
qosIpAclDefinitionTableA class that defines a set of ACLs each being an ordered list of ACEs. SEQUENCE OF QosIpAclDefinitionEntry .1.3.6.1.4.1.3320.18.2.1.7.2 |
qosIpAclDefinitionEntryAn instance of this class specifies an ACE in an ACL and its order with respect to other ACEs in the same ACL. QosIpAclDefinitionEntry .1.3.6.1.4.1.3320.18.2.1.7.2.1 |
qosIpAclDefinitionIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.7.2.1.1 |
qosIpAclIdAn index for this ACL. There will be one instance of policy class qosIpAclDefinition with this integer index for each ACE in the ACL per role combination.ro PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.7.2.1.2 |
qosIpAceOrderAn integer that determines the position of this ACE in the ACL. An ACE with a given order is positioned in the access contol list before one with a higher order.ro Unsigned32 (NMS-TC) .1.3.6.1.4.1.3320.18.2.1.7.2.1.3 |
qosIpAclDefAceIdThis attribute specifies the ACE in the qosIpAceTable that is in the ACL specified by qosIpAclId at the position specified by qosIpAceOrder.ro PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.7.2.1.4 |
qosIpAclActionTableA class that applies a set of ACLs to interfaces specifying, for each interface the order of the ACL with respect to other ACLs applied to the same interface and, for each ACL the action to take for a packet that matches a permit ACE in that ACL. Interfaces are specified abstractly in terms of interface role combinations. SEQUENCE OF QosIpAclActionEntry .1.3.6.1.4.1.3320.18.2.1.7.3 |
qosIpAclActionEntryAn instance of this class applies an ACL to traffic in a particular direction on an interface with a particular role combination, and specifies the action for packets which match the ACL. QosIpAclActionEntry .1.3.6.1.4.1.3320.18.2.1.7.3.1 |
qosIpAclActionIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.7.3.1.1 |
qosIpAclActAclIdThe ACL associated with this action.ro PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.7.3.1.2 |
qosIpAclInterfaceRolesThe interfaces to which this ACL applies specified in terms of a set of roles.ro RoleCombination .1.3.6.1.4.1.3320.18.2.1.7.3.1.3 |
qosIpAclInterfaceDirectionThe direction of packet flow at the interface in question to which this ACL applies.ro Enumeration .1.3.6.1.4.1.3320.18.2.1.7.3.1.4 |
qosIpAclOrderAn integer that determines the order of this ACL in the list of ACLs applied to interfaces of the specified role combination. An ACL with a given order is positioned in the list before one with a higher order.ro Unsigned32 (NMS-TC) .1.3.6.1.4.1.3320.18.2.1.7.3.1.5 |
qosIpAclDscpThe DSCP to classify the packet with in the event that the packet matches an ACE in this ACL and the ACE is a permit.ro Dscp .1.3.6.1.4.1.3320.18.2.1.7.3.1.6 |
qosIpAclDscpTrustedIf this attribute is true, then the Dscp associated with the packet is trusted, i.e., it is assumed to have already been set. In this case, the Dscp is not rewritten with qosIpAclDscp (qosIpAclDscp is ignored). The packet is still policed as part of its micro flow and its aggregate flow. When a trusted action is applied to an input interface, the Dscp associated with the packet is the one contained in the packet. When a trusted action is applied to an output interface, the Dscp associated with the packet is the one that is the result of the input classification and policing.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.18.2.1.7.3.1.7 |
qosIpAclMicroFlowPolicerIdAn index identifying the instance of policer to apply to the microflow. It must correspond to the integer index of an instance of class qosPolicerTableor be zero. If zero, the microflow is not policed.ro PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.7.3.1.8 |
qosIpAclAggregateIdAn index identifying the aggregate that the packet belongs to. It must correspond to the integer index of an instance of class qosAggregateTable or be zero. If zero, the microflow does not belong to any aggregate and is not policed as part of any aggregate.ro PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.7.3.1.9 |
qosIfParameters OBJECT IDENTIFIER .1.3.6.1.4.1.3320.18.2.1.8 |
qosIfSchedulingPreferencesTableThis class specifies the scheduling preference an interface chooses if it supports multiple scheduling types. Higher values are preferred over lower values. SEQUENCE OF QosIfSchedulingPreferenceEntry .1.3.6.1.4.1.3320.18.2.1.8.1 |
qosIfSchedulingPreferenceEntryAn instance of this class specifies a scheduling preference for a queue-type on an interface with a particular role combination. QosIfSchedulingPreferenceEntry .1.3.6.1.4.1.3320.18.2.1.8.1.1 |
qosIfSchedulingPreferenceIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.8.1.1.1 |
qosIfSchedulingRolesThe combination of roles the interface must have for this policy instance to apply to that interface.ro RoleCombination .1.3.6.1.4.1.3320.18.2.1.8.1.1.2 |
qosIfSchedulingPreferenceThe preference to use this scheduling discipline and queue type. A higher value means a higher preference. If two disciplines have the same preference the choice is a local decision.ro INTEGER .1.3.6.1.4.1.3320.18.2.1.8.1.1.3 |
qosIfSchedulingDisciplineAn enumerate type for all the known scheduling disciplines.ro Enumeration .1.3.6.1.4.1.3320.18.2.1.8.1.1.4 |
qosIfSchedulingQueueTypeThe queue type of this preference.ro QosInterfaceQueueType .1.3.6.1.4.1.3320.18.2.1.8.1.1.5 |
qosIfDropPreferenceTableThis class specifies the preference of the drop mechanism an interface chooses if it supports multiple drop mechanisms. Higher values are preferred over lower values. SEQUENCE OF QosIfDropPreferenceEntry .1.3.6.1.4.1.3320.18.2.1.8.2 |
qosIfDropPreferenceEntryAn instance of this class specifies a drop preference for a drop mechanism on an interface with a particular role combination. QosIfDropPreferenceEntry .1.3.6.1.4.1.3320.18.2.1.8.2.1 |
qosIfDropPreferenceIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.8.2.1.1 |
qosIfDropRolesThe combination of roles the interface must have for this policy instance to apply to that interface.ro RoleCombination .1.3.6.1.4.1.3320.18.2.1.8.2.1.2 |
qosIfDropPreferenceThe preference to use this drop mechanism. A higher value means a higher preference. If two mechanisms have the same preference the choice is a local decision.ro INTEGER .1.3.6.1.4.1.3320.18.2.1.8.2.1.3 |
qosIfDropDisciplineAn enumerate type for all the known drop mechanisms.ro Enumeration .1.3.6.1.4.1.3320.18.2.1.8.2.1.4 |
qosIfDscpAssignmentTableThe assignment of each DSCP to a queue and threshold for each interface queue type. SEQUENCE OF QosIfDscpAssignmentEntry .1.3.6.1.4.1.3320.18.2.1.8.3 |
qosIfDscpAssignmentEntryAn instance of this class specifies the queue and threshold set for a packet with a particular DSCP on an interface of a particular type with a particular role combination. QosIfDscpAssignmentEntry .1.3.6.1.4.1.3320.18.2.1.8.3.1 |
qosIfDscpAssignmentIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.8.3.1.1 |
qosIfDscpRolesThe role combination the interface must be configured with.ro RoleCombination .1.3.6.1.4.1.3320.18.2.1.8.3.1.2 |
qosIfQueueTypeThe interface queue type to which this row applies.ro QosInterfaceQueueType .1.3.6.1.4.1.3320.18.2.1.8.3.1.3 |
qosIfDscpThe DSCP to which this row applies.ro Dscp .1.3.6.1.4.1.3320.18.2.1.8.3.1.4 |
qosIfQueueThe queue to which the DSCP applies for the given interface type.ro INTEGER .1.3.6.1.4.1.3320.18.2.1.8.3.1.5 |
qosIfThresholdSetThe threshold set of the specified queue to which the DSCP applies for the given interface type.ro INTEGER .1.3.6.1.4.1.3320.18.2.1.8.3.1.6 |
qosIfRedTableA class of lower and upper values for each threshold set in a queue supporting WRED. If the size of the queue for a given threshold is below the lower value then packets assigned to that threshold are always accepted into the queue. If the size of the queue is above upper value then packets are always dropped. If the size of the queue is between the lower and the upper then packets are randomly dropped. SEQUENCE OF QosIfRedEntry .1.3.6.1.4.1.3320.18.2.1.8.4 |
qosIfRedEntryAn instance of this class specifies threshold limits for a particular RED threshold of a given threshold set on an interface and with a particular role combination. QosIfRedEntry .1.3.6.1.4.1.3320.18.2.1.8.4.1 |
qosIfRedIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.8.4.1.1 |
qosIfRedRolesThe role combination the interface must be configured with.ro RoleCombination .1.3.6.1.4.1.3320.18.2.1.8.4.1.2 |
qosIfRedNumThresholdSetsThe values in this entry apply only to queues with the number of thresholds specified by this attribute.ro ThresholdSetRange .1.3.6.1.4.1.3320.18.2.1.8.4.1.3 |
qosIfRedThresholdSetThe threshold set to which the lower and upper values apply. It must be in the range 1 through qosIfRedNumThresholdSets. There must be exactly one PRI for each value in this range.ro INTEGER .1.3.6.1.4.1.3320.18.2.1.8.4.1.4 |
qosIfRedThresholdSetLowerThe threshold value below which no packets are dropped.ro Percent .1.3.6.1.4.1.3320.18.2.1.8.4.1.5 |
qosIfRedThresholdSetUpperThe threshold value above which all packets are dropped.ro Percent .1.3.6.1.4.1.3320.18.2.1.8.4.1.6 |
qosIfTailDropTableA class for threshold sets in a queue supporting tail drop. If the size of the queue for a given threshold set is at or below the specified value then packets assigned to that threshold set are always accepted into the queue. If the size of the queue is above the specified value then packets are always dropped. SEQUENCE OF QosIfTailDropEntry .1.3.6.1.4.1.3320.18.2.1.8.5 |
qosIfTailDropEntryAn instance of this class specifies the queue depth for a particular tail-drop threshold set on an interface with a particular role combination. QosIfTailDropEntry .1.3.6.1.4.1.3320.18.2.1.8.5.1 |
qosIfTailDropIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.8.5.1.1 |
qosIfTailDropRolesThe role combination the interface must be configured with.ro RoleCombination .1.3.6.1.4.1.3320.18.2.1.8.5.1.2 |
qosIfTailDropNumThresholdSetsThe value in this entry applies only to queues with the number of thresholds specified by this attribute.ro ThresholdSetRange .1.3.6.1.4.1.3320.18.2.1.8.5.1.3 |
qosIfTailDropThresholdSetThe threshold set to which the threshold value appliesro INTEGER .1.3.6.1.4.1.3320.18.2.1.8.5.1.4 |
qosIfTailDropThresholdSetValueThe threshold value above which packets are dropped.ro Percent .1.3.6.1.4.1.3320.18.2.1.8.5.1.5 |
qosIfWeightsTableA class of scheduling weights for each queue of an interface that supports weighted round robin scheduling or a mix of priority queueing and weighted round robin. For a queue with N priority queues, the N highest queue numbers are the priority queues with the highest queue number having the highest priority. WRR is applied to the non-priority queues. SEQUENCE OF QosIfWeightsEntry .1.3.6.1.4.1.3320.18.2.1.8.6 |
qosIfWeightsEntryAn instance of this class specifies the scheduling weight for a particular queue of an interface with a particular number of queues and with a particular role combination. QosIfWeightsEntry .1.3.6.1.4.1.3320.18.2.1.8.6.1 |
qosIfWeightsIdAn integer index to identify the instance of the policy class. PolicyInstanceId .1.3.6.1.4.1.3320.18.2.1.8.6.1.1 |
qosIfWeightsRolesThe role combination the interface must be configured with.ro RoleCombination .1.3.6.1.4.1.3320.18.2.1.8.6.1.2 |
qosIfWeightsNumQueuesThe value of the weight in this instance applies only to interfaces with the number of queues specified by this attribute.ro QueueRange .1.3.6.1.4.1.3320.18.2.1.8.6.1.3 |
qosIfWeightsQueueThe queue to which the weight applies.ro INTEGER .1.3.6.1.4.1.3320.18.2.1.8.6.1.4 |
qosIfWeightsDrainSizeThe maximum number of bytes that may be drained from the queue in one cycle. The percentage of the bandwith allocated to this queue can be calculated from this attribute and the sum of the drain sizes of all the non-priority queues of the interface.ro Unsigned32 (NMS-TC) .1.3.6.1.4.1.3320.18.2.1.8.6.1.5 |
qosIfWeightsQueueSizeThe size of the queue in bytes. Some devices set queue size in terms of packets. These devices must calculate the queue size in packets by assuming an average packet size suitable for the particular interface. Some devices have a fixed size buffer to be shared among all queues. These devices must allocate a fraction of the total buffer space to this queue calculated as the the ratio of the queue size to the sum of the queue sizes for the interface.ro Unsigned32 (NMS-TC) .1.3.6.1.4.1.3320.18.2.1.8.6.1.6 |