AcAtm
AI MIB Summary
The AcAtm MIB module enables monitoring and management of Audiocodes VoIP gateways and session border controllers, specifically providing visibility into ATM (Asynchronous Transfer Mode) interface statistics, PVC (Permanent Virtual Circuit) states, and cell-based traffic counters. This module facilitates the tracking of ATM-specific performance metrics such as cell loss, cell delay, and interface error rates to ensure reliable voice transport over legacy ATM networks.
The Audiocodes ATMMIB.
Main OID:
acAtm.1.3.6.1.4.1.5003.9.10.6
89
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
89 total| Object Name |
|---|
audioCodes OBJECT IDENTIFIER .1.3.6.1.4.1.5003 |
acRegistrations OBJECT IDENTIFIER .1.3.6.1.4.1.5003.7 |
acGeneric OBJECT IDENTIFIER .1.3.6.1.4.1.5003.8 |
acProducts OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9 |
acBoardMibs OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10 |
acAtmThe Audiocodes ATMMIB. MODULE-IDENTITY .1.3.6.1.4.1.5003.9.10.6 |
acAtmConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.6.1 |
atmGeneralParams OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.6.1.1 |
atmGeneralParamsAtmDefaultApplicationTypeThis is the default application type used when the board cannot determine from the H248 add message which AAL type to use.rw Enumeration .1.3.6.1.4.1.5003.9.10.6.1.1.1 |
atmGeneralParamsAtmTransmissionModeThis is the ATM Port Optical Carrier type which indicates whether the European standard (SDH) is to be employed or the North American Standard (SONET)rw Enumeration .1.3.6.1.4.1.5003.9.10.6.1.1.2 |
atmPort OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.6.1.2 |
atmPortTableThis table indicates general information about and alarm status of the ATM optical fiber ports. It is also used to configure the ATM address associated with the optical port and read that address. SEQUENCE OF AtmPortEntry .1.3.6.1.4.1.5003.9.10.6.1.2.1 |
atmPortEntry AtmPortEntry .1.3.6.1.4.1.5003.9.10.6.1.2.1.1 |
atmPortAdministrativeStateThis is the ATM Port Administrative Staterw Enumeration .1.3.6.1.4.1.5003.9.10.6.1.2.1.1.1 |
atmPortOperationalStateThis is the Port Operational Statero Enumeration .1.3.6.1.4.1.5003.9.10.6.1.2.1.1.2 |
atmPortNumberThis is the ATM Port Numberro Enumeration .1.3.6.1.4.1.5003.9.10.6.1.2.1.1.3 |
atmPortAdminAddressThis is the AdministrativeATM Port Address (20 octets in length - 40 hexadecimal characters). This address is manually configured.This address is used when ILMI is not available.rw AtmAddr .1.3.6.1.4.1.5003.9.10.6.1.2.1.1.4 |
atmPortOperationalAddressThis is the port ATM address currently in operation (i.e.:assigned to this port). This addressis set to atmPortAdminAddress if no ILMI address is registered. If an ILMI address is successfully registered, then atmPortOperationalAddress will be set to the ILMI one, though an administrative address may have already been configured. Thus ILMI address always takes precedence over the administrative one. If both the administrative and ILMI addresses are unavailable then the operational address is left empty. Refer to atmPortAddressMode for which address is operational.ro AtmAddr .1.3.6.1.4.1.5003.9.10.6.1.2.1.1.5 |
atmPortAlarmStatusThis is the ATM Port Alarm Status. The possible values are: cleared(0) - LOS, AIS and RDI conditions are not present los(1) - the LOS condition is present ais(2) - AIS condition is present (LOS condition is not present) rdi(4) - RDI condition is present (LOS and AIS conditions are not present) Note: Alarm conditions (from the SONET/SDH standard documents) are: LOS - Loss Of Signal AIS - Alarm Indication Signal RDI - Remote Defect Indicationro Enumeration .1.3.6.1.4.1.5003.9.10.6.1.2.1.1.6 |
atmPortAddressModeThe mode reflects the type of address in operation. addrModeNone(0) : No administrative address has been configured and no ILMI address has been registered. Thus no address is available to assign to the port. addrModeManual(1): An Administrative address has been configured and no ILMI address has been registered. Thus the port is assigned the manually configured address.addrModeILMI (2): An ILMI address has been registered. The port is assigned this address. The administrative address is ignored if it has been configured.ro Enumeration .1.3.6.1.4.1.5003.9.10.6.1.2.1.1.7 |
atmRemoteGateway OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.6.1.3 |
atmRemoteGatewayTableThis includes the destination remote Gateways (and RNC) that the Media Gateway would have signaling contact with. SEQUENCE OF AtmRemoteGatewayEntry .1.3.6.1.4.1.5003.9.10.6.1.3.1 |
atmRemoteGatewayEntry AtmRemoteGatewayEntry .1.3.6.1.4.1.5003.9.10.6.1.3.1.1 |
atmRemoteGatewayRowStatusThe RowStatus textual convention is used to manage the creation and deletion and active of conceptual rows.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.6.1.3.1.1.1 |
atmRemoteGatewayActionDevelopment Pending -for future usero INTEGER .1.3.6.1.4.1.5003.9.10.6.1.3.1.1.2 |
atmRemoteGatewayActionResultDevelopment Pending -future usero INTEGER .1.3.6.1.4.1.5003.9.10.6.1.3.1.1.3 |
atmRemoteGatewayIndex.rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.3.1.1.4 |
atmRemoteGatewayNameRemote Gateway namerw OCTET STRING .1.3.6.1.4.1.5003.9.10.6.1.3.1.1.5 |
atmRemoteGatewayNSAPAddressThis is the ATM Address associated with the remote Gateway to which this PVC connects (20 octets in length - 40 hexadecimal characters)rw AtmAddr .1.3.6.1.4.1.5003.9.10.6.1.3.1.1.6 |
atmRemoteGatewayALCAPInstanceNumALCAP Instance number associated with the remote Gateway ( 3G only)rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.3.1.1.7 |
aal2PVC OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.6.1.4 |
aal2PVCTableThis table contains information referring to Permanent Virtual Channels connecting the AMS to the ATM Edge Switch. SEQUENCE OF Aal2PVCEntry .1.3.6.1.4.1.5003.9.10.6.1.4.1 |
aal2PVCEntry Aal2PVCEntry .1.3.6.1.4.1.5003.9.10.6.1.4.1.1 |
aal2PVCRowStatusThe RowStatus textual convention is used to manage the creation and deletion and active of conceptual rows.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.6.1.4.1.1.1 |
aal2PVCActionDevelopment Pending - for future usero Enumeration .1.3.6.1.4.1.5003.9.10.6.1.4.1.1.2 |
aal2PVCActionResultDevelopment Pending - for future usero Enumeration .1.3.6.1.4.1.5003.9.10.6.1.4.1.1.3 |
aal2PVCRemoteGatewayIndexThis is the gw index that associated with the remote Gateway table to which this PVC connects (20 octets in length - 40 hexadecimal characters)rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.4.1.1.4 |
aal2PVCVCCIPATHIDThis is the range of Virtual Connection Channel Identifiers which is an end to end identifier for an AAL2 VC.rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.4.1.1.5 |
aal2PVCPortNumberThis is the port number associated with the PVCrw Enumeration .1.3.6.1.4.1.5003.9.10.6.1.4.1.1.6 |
aal2PVCVpiThis is the VPI assigned to the PVCrw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.4.1.1.7 |
aal2PVCVciThis is the VCI assigned to the PVCrw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.4.1.1.8 |
aal2PVCMaxNumOfCidThis is the maximum number of CIDs for the AAL2 PVC.rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.4.1.1.9 |
aal2PVCNumOfCidInUseThis is the number of CIDs for AAL2 PVC currently in use.ro INTEGER .1.3.6.1.4.1.5003.9.10.6.1.4.1.1.10 |
aal2PVCServiceCategoryThis is the Service Category which is either CBR (Constant Bit Rate) or rtVBR (realtime Variable Bit Rate)rw Enumeration .1.3.6.1.4.1.5003.9.10.6.1.4.1.1.11 |
aal2PVCPCRThis is the peak cell rate (PCR) associated with the provisioned virtual channel (PVC). Includes bandwidth for all CIDs within the PVCrw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.4.1.1.12 |
aal2PVCSCRThis is the sustained cell rate (SCR) associated with the provisioned virtual channel (PVC). Includes bandwidth for all CIDs within the PVC.rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.4.1.1.13 |
aal2PVCMBSThis is the Maximum Burst Size (MBS) for the provisioned virtual channel (PVC).rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.4.1.1.14 |
atmPortLoopbackConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.6.1.5 |
atmPortLoopbackConfigTableThis table gives the Loopback Configuration associated with a given Optical Fiber Port number. SEQUENCE OF AtmPortLoopbackConfigEntry .1.3.6.1.4.1.5003.9.10.6.1.5.1 |
atmPortLoopbackConfigEntry AtmPortLoopbackConfigEntry .1.3.6.1.4.1.5003.9.10.6.1.5.1.1 |
atmPortLoopbackConfigIsUsedThis tells whether or not the port loopback is used. If the port is available on the board, this is yes.rw Enumeration .1.3.6.1.4.1.5003.9.10.6.1.5.1.1.1 |
atmPortLoopbackConfigActionDevelopment Pending - for future usero Enumeration .1.3.6.1.4.1.5003.9.10.6.1.5.1.1.2 |
atmPortLoopbackConfigActionResultDevelopment Pending - for future usero Enumeration .1.3.6.1.4.1.5003.9.10.6.1.5.1.1.3 |
atmPortLoopbackConfigPortNumberThe port number associated with the optical port which is being described.rw Enumeration .1.3.6.1.4.1.5003.9.10.6.1.5.1.1.4 |
atmPortLoopbackConfigModeThis is the mode in which the loopback will work: no loopback, UNI loopback, or Virtual Path loopbackrw Enumeration .1.3.6.1.4.1.5003.9.10.6.1.5.1.1.5 |
atmPortLoopbackConfigOutBoundVirtualPathIf the atmLoopback mode is VP, this specifies the VP identity for the cells going toward the ATM edge switchrw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.5.1.1.6 |
atmPortLoopbackConfigInBoundVirtualPathIf the atmLoopback mode is VP, this specifies the VP identity for the cells coming from the ATM edge switchrw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.5.1.1.7 |
atmPortLoopbackConfigVciRangeFirstIf the atmLoopback mode is VP, this specifies the minimum VCI within the inbound and outbound VP which may be used.rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.5.1.1.8 |
atmPortLoopbackConfigVciRangeLastIf the atmLoopback mode is VP, this specifies the maximum VCI within the inbound and outbound VP which may be used.rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.5.1.1.9 |
atmPortLoopbackConfigServiceCategoryThis category is limited to Constant Bit Rate (CBR) traffic or realtime Variable Bit Rate (rtVBR) for this release.rw Enumeration .1.3.6.1.4.1.5003.9.10.6.1.5.1.1.10 |
atmPortLoopbackConfigPCRThis is the peak cell rate (PCR) associated with the switched virtual channel (SVC). This is used for Constant Bit Rate (CBR) traffic. For AAL2, this includes bandwidth for all CIDs within the SVC. For AAL1, there is only one channel per SVC (and no concept of a CID).rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.5.1.1.11 |
atmPortLoopbackConfigSCRThis is the sustained cell rate (SCR) associated with the switched virtual channel (SVC). This is used for realtime Variable Bit Rate (rtVBR) traffice. For AAL2, this includes bandwidth for all CIDs within the SVC. For AAL1, there is only one channel per SVC (and no concept of a CID).rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.5.1.1.12 |
atmPortLoopbackConfigMBSThis is the Maximum Burst Size (MBS) associated with the switched virtual channel (SVC). This is used in realtime Variable Bit Rate (rtVBR) traffice. The unit for this parameter is ATM cells.rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.5.1.1.13 |
atmSvcProfile OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.6.1.6 |
atmSvcProfileTableThis table indicates information about profiles associated with the creation of each new AAL2 SVC. SEQUENCE OF AtmSvcProfileEntry .1.3.6.1.4.1.5003.9.10.6.1.6.1 |
atmSvcProfileEntry AtmSvcProfileEntry .1.3.6.1.4.1.5003.9.10.6.1.6.1.1 |
atmSvcProfileIsUsedThis tells whether or not this SVC profile is used. If it is used, the value is yes.rw Enumeration .1.3.6.1.4.1.5003.9.10.6.1.6.1.1.1 |
atmSvcProfileIndexInitially only one SVC Profile is supported. This parameter may be updated later as the table supports more profilesrw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.6.1.1.2 |
atmSvcProfileMaxNumOfCidsThe CIDs fall in the range of 8 to 255, so there are a maximum of 248 CIDs possible. The assignment of CID #8 may be received but not initiated. Assignments from the low end of the CID range should start with 9 as there are some vendors who use 8 for a special OAM purpose.rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.6.1.1.3 |
atmSvcProfilePCRThis is the peak cell rate (PCR) associated with the switched virtual channel (SVC). This is used for Constant Bit Rate (CBR) traffic. For AAL2, this includes bandwidth for all CIDs within the SVC. For AAL1, there is only one channel per SVC (and no concept of a CID).rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.6.1.1.4 |
atmSvcProfileSCRThis is the sustained cell rate (SCR) associated with the switched virtual channel (SVC). This is used for realtime Variable Bit Rate (rtVBR) traffice. For AAL2, this includes bandwidth for all CIDs within the SVC. For AAL1, there is only one channel per SVC (and no concept of a CID).rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.6.1.1.5 |
atmSvcProfileMBSThis is the Maximum Burst Size (MBS) associated with the switched virtual channel (SVC). This is used in realtime Variable Bit Rate (rtVBR) traffice. The unit for this parameter is ATM cells.rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.6.1.1.6 |
atmSvcProfilePersistenceThis is the parameter which descirbes how long an AAL2 SVC will persist even when no CIDs are in use. Generally, this is on the order of 180 to 600 seconds. Non-persistent SVCs should have a value of 0.rw INTEGER .1.3.6.1.4.1.5003.9.10.6.1.6.1.1.7 |
atmSvcProfileServiceCategoryThis category is limited to Constant Bit Rate (CBR) traffic or realtime Variable Bit Rate (rtVBR) for this release.rw Enumeration .1.3.6.1.4.1.5003.9.10.6.1.6.1.1.8 |
acAtmStatus OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.6.2 |
atmSvcConnection OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.6.2.1 |
atmSvcConnectionTableThis is the table which describes the read only characteristics of a given AAL1 or AAL2 SVC. SEQUENCE OF AtmSvcConnectionEntry .1.3.6.1.4.1.5003.9.10.6.2.1.1 |
atmSvcConnectionEntry AtmSvcConnectionEntry .1.3.6.1.4.1.5003.9.10.6.2.1.1.1 |
atmSvcConnectionIndexA unique index, that identifies the SVC on the system.ro INTEGER .1.3.6.1.4.1.5003.9.10.6.2.1.1.1.1 |
atmSvcConnectionRemoteGatewayAddressThis is the ATM Address associated with the remote Gateway to which this SVC connects (20 octets in length - 40 hexadecimal characters)ro AtmAddr .1.3.6.1.4.1.5003.9.10.6.2.1.1.1.2 |
atmSvcConnectionPortThis is the port on which the SVC is connectedro Enumeration .1.3.6.1.4.1.5003.9.10.6.2.1.1.1.3 |
atmSvcConnectionVpiThis is the VPI associated with the SVCro INTEGER .1.3.6.1.4.1.5003.9.10.6.2.1.1.1.4 |
atmSvcConnectionVciThis is the VCI associated with the SVCro INTEGER .1.3.6.1.4.1.5003.9.10.6.2.1.1.1.5 |
atmSvcConnectionAALTypeThis is the Adaptation Layer type. It is either AAL1 or AAL2.ro Enumeration .1.3.6.1.4.1.5003.9.10.6.2.1.1.1.6 |
atmSvcConnectionDirectionThis is the direction in which the SVC was setup. Incoming means the this end received the SETUP. Outgoing means this end sent the SETUP.ro Enumeration .1.3.6.1.4.1.5003.9.10.6.2.1.1.1.7 |
atmSvcConnectionEecidThis is the unique end to end identifier associated with the setup of AAL1 SVCsro Unsigned32 .1.3.6.1.4.1.5003.9.10.6.2.1.1.1.8 |
atmSvcConnectionVcciThis is the unique identity of an SVC associated with an AAL2 connectionro INTEGER .1.3.6.1.4.1.5003.9.10.6.2.1.1.1.9 |
atmSvcConnectionMaxNumOfCidThis is the maximum number of CIDs for an AAL2 SVC.ro INTEGER .1.3.6.1.4.1.5003.9.10.6.2.1.1.1.10 |
atmSvcConnectionNumOfCidInUseThis is the number of channel Ids currently in use in a given SVC.ro INTEGER .1.3.6.1.4.1.5003.9.10.6.2.1.1.1.11 |