AC-SYSTEM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for AC-SYSTEM-MIB.
Main OID:
acSystem.1.3.6.1.4.1.5003.9.10.10
555
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
555 total| Object Name |
|---|
acSystem MODULE-IDENTITY .1.3.6.1.4.1.5003.9.10.10 |
acSystemConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1 |
acSysControl OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.1 |
acSysControlProtocolTypeDefines the control protocol type. Choose either: 0 = None 1 = MGCP 2 = MEGACO 4 = H.323 8 = SIP. Access: Offline. AC INI-Param: MGCONTROLPROTOCOLTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.1.1 |
acSysControlTrunkingToAnalogFunctionalityProfileThis parameter defines the Trunking to Analog Functionality Profile. 0 = Disable 1 = Enable MelCAS/LoopStart/GroundStart to Analog Functionality Refer to the enumerator acTrunkingToAnalogFunctionalityProfile enum for the possible values. Access: Offline. AC INI-Param: TrunkingToAnalogFunctionalityProfilerw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.1.2 |
acSysTDM OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.2 |
acSysTDMClock OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.2.1 |
acSysTDMClockSourceSelects the clock source on which the board synchronizes. 1 = Local oscillator 3 = MVIP 4 = PSTN Network 8 = H.110A 9 = H.110B 10 = NetRef1 11 = NetRef2 12 = SC2M 13 = SC4M 14 = SC8M 15 = BITS 16 = Network-B 17 = ATM-OC3 18 = ATM-OC3-B 19 = ATM-OC12 20 = Network-DS3-1 21 = Network-DS3-2 22 = Network-DS3-3 Default = 1 TP-1610 = 3. Access: Online. AC INI-Param: TDMBUSCLOCKSOURCErw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.2.1.1 |
acSysTDMClockEnableFallBackDefines the auto fallback of the clock. Range: 0 = Manual 1 = Auto Non-Revertive 2 = Auto Revertive. Access: Online. AC INI-Param: TDMBUSENABLEFALLBACKrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.2.1.2 |
acSysTDMClockLocalReferenceWhen the clock source is set to Network, this parameter selects the Trunk ID to be used as the clock synchronization source of the board. When using H.110/H.100 bus, this parameter also selects the trunk used as the clock source for the NetRef clock generation (in this case, the clock source must not be set to Network. Range = 0 to (MAX_TRUNK _NUM-1). Access: Online. AC INI-Param: TDMBusLocalReferencerw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.2.1.3 |
acSysTDMClockMasterSlaveSelectionSets SC/MVIP/H.100/H.110 to either: 0 = Slave mode (another board in the system must supply the clock to the TDM bus) or Master mode (the board is the clock source for the TDM bus) or Secondary Master mode (for H100/H110 Bus only). 1 = H110A Master in Master mode 2 = H.110B Master. Access: Online. AC INI-Param: TDMBUSMASTERSLAVESELECTIONrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.2.1.4 |
acSysTDMClockNetRefSpeedDetermines the NetRef frequency (for both generation and synchronization). 0 = 8 kHz 1 = 1.544 MHz 2 = 2.048 MHz. Access: Online. AC INI-Param: TDMBUSNETREFSPEEDrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.2.1.5 |
acSysTDMClockAutoFallBackEnableEnables or disables the PSTN trunk auto-fallback feature. Access: Offline. AC INI-Param: TDMBusPSTNAutoClockEnablerw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.2.1.6 |
acSysTDMClockAutoFallBackRevertingEnableEnables/disables the PSTN trunk auto-fallback reverting feature. Access: Offline. AC INI-Param: TDMBusPSTNAutoClockRevertingEnablerw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.2.1.7 |
acSysTDMClockBitsReferenceConfigures the BITS clock reference when the board source clock is set to BITS and Fallback is set to manual or non-revertive. 1 = REF_1 2 = REF_2. Access: Online. AC INI-Param: TDMBITSClockReferencerw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.2.1.8 |
acSysTDMClockPLLOutOfRangeDetermines the valid PPM range outside the Stratum 3 standard. This parameter is only relevant for the TP8410 on the Mediant 3000. This parameter is enabled when bspTimingModuleCfgTimingMode is set to TM_External_MODE(1). One of the following possible values: OOR_9_2to12ppm(0),OOR_40to52ppm(1),OOR_100to130ppm(2),OOR_64to83ppm(3),OOR_13_8to18ppm(4),OOR_24_6to32ppm(5),OOR_36_6to47_5ppm(6),OOR_52to67_5ppm(7). Access: Online. AC INI-Param: PLLOutOfRangerw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.2.1.9 |
acSysTDMClockFallbackClockSelects the fallback clock source on which board synchronizes in the event of clock failure. 4 = PSTN Network 8 = H.110A 9 = H.110B 10 = NetRef1 11 = NetRef2. Access: Online. AC INI-Param: TDMBusFallbackClockrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.2.1.10 |
acSysTDMBus OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.2.2 |
acSysTDMBusTypeSelects the TDM bus interface to be used (only one TDM bus interface can be enabled at one time although more than one can physically exist on the board). Range: 0 = acMVIP_BUS 1 = acSC_BUS 2 = acFRAMERS 4 = acH100_BUS 5 = EXT TDM 6 = Analog 8 = SW Pstn Default: TP-1610 and TP-2810 = 2 TPM-1100 = 5 TP-260 = 1. Access: Offline. AC INI-Param: TDMBUSTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.2.2.1 |
acSysTDMBusSpeedSelects the TDM bus speed according to the Bus Type as follows: SC = 0/2/3 H.110/H.100 = 3 MVIP = 0 Where: 0 = 2048 kbps 2 = 4096 kbps 3 = 8192 kbps 4 = 16384 kbps Default: TP-260 = 2 All other boards = 3. Access: Offline. AC INI-Param: TDMBUSSPEEDrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.2.2.2 |
acSysTDMBusOutputPortDefines the SC/MVIP/H.100/H.110 output port to be used for the board's channel #0. All other channels then occupy the next timeslots sequentially. Range: 0 to 15 for SC/MVIP 0 to 31 for H.110. Access: Offline. AC INI-Param: TDMBUSOUTPUTPORTrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.2.2.3 |
acSysTDMBusOutputStartingChannelDefines the outgoing TDM Timeslot for board's channel #0. The remaining channels are organized sequentially. Access: Offline. AC INI-Param: TDMBUSOUTPUTSTARTINGCHANNELrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.2.2.4 |
acSysPCM OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.2.3 |
acSysPCMLawSelectSelects the type of PCM companding law in input/output TDM bus (TDM bus is defined using the TDMBusType parameter). 1 = A-law 3 = Mu-Law. Access: Offline. AC INI-Param: PCMLAWSELECTrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.2.3.1 |
acSysPCMIdlePatternDefines the PCM pattern applied to the E1/T1 timeslot (B-channel) when the channel is idle. Default: 0xFF if PCMLawSelect is Mu-Law 0xD5 if PCMLawSelect is A-Law Range = 0x00 to 0xFF. Access: Offline. AC INI-Param: IDLEPCMPATTERNrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.2.3.2 |
acSysPCMIdleABCDPatternDefines the ABCD (CAS) pattern to be applied on the signaling bus before it is changed by the user or the PSTN protocol. This is only relevant when using PSTN interface with CAS protocols. Range = 0x0 to 0xF. Access: Offline. AC INI-Param: IDLEABCDPATTERNrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.2.3.3 |
acSysPCMSerialPortAuditIntervalMinInterval timeout in minutes, of the Serial Port audit. In case of 0 value, the audit isn't running. Access: Offline. AC INI-Param: SerialPortAuditIntervalMinrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.2.3.4 |
acSysNetworkConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.3 |
acSysIP OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.3.1 |
acSysIPAddressBoard IP Address. In human readable form. in host byte order e.g. 192.10.1.2 = 0xc00a0102). Users should set the subnet mask to a valid value per the IP address. Access: Online. AC INI-Param: N/Arw IpAddress .1.3.6.1.4.1.5003.9.10.10.1.3.1.1 |
acSysIPSubNetAddressBoard SubNet Address. In human readable form. (in host byte order e.g. 255.255.255.0 = 0xffffff00). default =255.255.255.0. Access: Online. AC INI-Param: N/Arw IpAddress .1.3.6.1.4.1.5003.9.10.10.1.3.1.2 |
acSysIPDefaultGatewayAddressDefault Gateway Address. Board's Default Gateway IP address. In human readable form. (in host byte order e.g. 192.10.1.255 = 0xc00a01ff). Access: Online. AC INI-Param: N/Arw IpAddress .1.3.6.1.4.1.5003.9.10.10.1.3.1.3 |
acSysIPDHCPEnableEnables/disables DHCP support. 0 = Disable 1 = Enable After the gateway is powered up, it attempts to communicate with a BootP server. If a BootP server does not respond and if DHCP is enabled, the gateway attempts to obtain its IP address and other network parameters from the DHCP server. Note that throughout the DHCP procedure, the BootP/TFTP application must be deactivated. If it isn't deactivated, the gateway receives a response from the BootP server instead of the DHCP server. For additional information on DHCP, refer to the product documentation. Note: DHCPEnable is a special 'Hidden' parameter. Once defined and saved in flash memory, its assigned value doesn't revert to its default even if the parameter doesn't appear in the INI file. Access: Online. AC INI-Param: DHCPEnablerw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.4 |
acSysIPDHCPSpeedFactorControls the DHCP renewal speed. When set to 0, the DHCP lease renewal is disabled. Otherwise, the renewal time is divided by this factor. Some DHCP-enabled routers perform better when set to 4. 0 = Disable DHCP 1 = Normal 2 to 10 = Fast. Access: Offline. AC INI-Param: DHCPSpeedFactorrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.1.5 |
acSysIPDnsPrimaryServerTypeThis parameter defines the DNS primary server's IP address type. Access: Offline. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.6 |
acSysIPDnsPrimaryServerThis parameter defines the DNS primary server's IP address. Range = Legal IP address. Access: Offline. AC INI-Param: DNSPriServerIPrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.5003.9.10.10.1.3.1.7 |
acSysIPDnsSecondaryServerTypeThis parameter defines the DNS secondary server's IP address type. Access: Offline. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.8 |
acSysIPDnsSecondaryServerThis parameter defines the DNS secondary server's IP address. Range = Legal IP address. Access: Offline. AC INI-Param: DNSSecServerIPrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.5003.9.10.10.1.3.1.9 |
acSysIPDHCPLeaseRenewalEnableEnables/disables DHCP renewal support. This paramater will only take effect if DHCPEnable = 0. After the gateway is powered up, it attempts to communicate with a BootP server. If a BootP server does not respond and if DHCP is disabled, the gateway will boot from flash. It will then attempt to communicate with the DHCP server to renew the lease. Note that throughout the DHCP procedure, the BootP/TFTP application must be deactivated. If it isn't deactivated, the gateway receives a response from the BootP server instead of the DHCP server. For additional information on DHCP, refer to the product documentation. For cases where the booting the board via DHCP is not desirable, but renewing DHCP leasing is. if DHCPEnable = 1, this paramater will not have any effect. Access: Online. AC INI-Param: EnableDHCPLeaseRenewalrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.10 |
acMultipleIP OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.3.1.30 |
acMultipleIPEnableEnables the multiple IPs feature. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: EnableMultipleIPsrwobsolete Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.1 |
acMultipleIPEnableTPNCPasOAMSets the TPNCP location on the Operation, Administration and Management (OAM) network, when operating in multiple IPs mode. If this parameter is set and the machine is working in multiple IPs mode, TPNCP is located on the OAM network. 0 = TPNCP on Control network 1 = TPNCP on OAM network. Access: Offline. AC INI-Param: EnableTPNCPasOAMrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.2 |
acMultipleIPEnableDNSasOAMSets the location of the DNS. If this parameter is set and the machine is functioning in multiple IPs mode, the DNS is located on the OAM network. If not, the DNS is on the control network. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: EnableDNSasOAMrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.3 |
acMultipleIPEnableNTPasOAMSets the location of the Network Time Protocol (NTP). If this parameter is set and the machine is functioning in multiple IPs mode, the NTP is located on the OAM network. If not, the NTP is located on the control network. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: EnableNTPasOAMrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.4 |
acMultipleIPEnableSCTPasControlSets the location of the Stream Control Transmission Protocol (SCTP). If this parameter is set and the machine is functioning in multiple IPs mode, the SCTP is located on the control network. If not, the SCTP is located on the OAM network. 0 = Default 1 = Enable. Access: Offline. AC INI-Param: EnableSCTPasControlrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.5 |
acMultipleIPEnableNetwotkSeparationEnables Network Physical Separation. Allows the user to have separate port for each Network. Requires suitable hardware. 0 = Disabled 1 = Enabled. Access: Offline. AC INI-Param: ENABLENETWORKPHYSICALSEPARATIONrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.6 |
acMultipleIPInterfaceTableActionThis is an action object. Set this to validateConfiguration(2) when you want the configuration in the acSysInterfaceTable to be validated immediately (as opposed to at reset). done(1) is the default value for any GET on this object. The results of the action should be followed in the syslog. Access: Instant. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.7 |
acNetworkIPTableIP control table. Enables to add, remove or configure the device's networks.obsolete SEQUENCE OF AcNetworkIPEntry .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21 |
acNetworkIPEntryobsolete AcNetworkIPEntry .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1 |
acNetworkIPIndexThe row's index. AC INI-Param: N/Aobsolete Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.1 |
acNetworkIPIfIndexThe row's index in the IF MIB. The IF MIB is not yet supported and so for now this is the same as the ipCidrRouteIfIndex object. 0 = OAM 1 = Media 2 = Control. AC INI-Param: N/Aroobsolete Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.2 |
acNetworkIPLocalIPAddressSets the IP address of the OAM (Operation, Administration & Management) when operating in multiple IPs mode. Range: Legal IP address Default = 0.0.0.0. Access: Online. AC INI-Param: N/Arwobsolete IpAddress .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.3 |
acNetworkIPLocalSubnetMaskSets the Subnet Mask for the OAM interface, when operating in multiple IPs mode. Range: Legal Subnet Default = 0.0.0.0. Access: Online. AC INI-Param: N/Arwobsolete IpAddress .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.4 |
acNetworkIPLocalDefGWSets the Default gateway for the OAM interface when operating in multiple IPs mode. Range: Legal IP address in subnet Default = 0.0.0.0. Access: Online. AC INI-Param: N/Arwobsolete IpAddress .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.5 |
acNetworkIPAdminStateDetermines if a row is currentely active or not. Lock(1) - the row is in configuration (non active) state. UnLock(2) - row is in active state. Access: Online. AC INI-Param: N/Arwobsolete Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.21.1.6 |
acSysInterfaceTableMultiple Interfaces' Interface Table SEQUENCE OF AcSysInterfaceEntry .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22 |
acSysInterfaceEntry AcSysInterfaceEntry .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1 |
acSysInterfaceIndexIndex Field for line. AC INI-Param: InterfaceTable_Index Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.1 |
acSysInterfaceRowStatusROWSTATUS Field for line. AC INI-Param: InterfaceTable_RowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.2 |
acSysInterfaceActionMangement Field for ACTIONS. AC INI-Param: InterfaceTable_Actionrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.3 |
acSysInterfaceActionResMangement Field for ACTIONS RESULT. AC INI-Param: InterfaceTable_ActionResro Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.4 |
acSysInterfaceApplicationTypesThe type assigned to the interface. Access: Offline. AC INI-Param: InterfaceTable_ApplicationTypesrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.5 |
acSysInterfaceModeInterface configuration mode. Access: Offline. AC INI-Param: InterfaceTable_InterfaceModerw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.6 |
acSysInterfaceIPAddressIP Address (can be either IPv4 or IPv6) for this interface. Access: Online. AC INI-Param: InterfaceTable_IPAddressrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.7 |
acSysInterfacePrefixLengthThe number of '1' bits in this interface's netmask. Access: Offline. AC INI-Param: InterfaceTable_PrefixLengthrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.8 |
acSysInterfaceGatewayDefault Gateway. Filled in one row only. 0 in others. Access: Offline. AC INI-Param: InterfaceTable_Gatewayrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.9 |
acSysInterfaceVlanIDVLAN ID of this interface. Access: Offline. AC INI-Param: InterfaceTable_VlanIDrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.10 |
acSysInterfaceNamea 16 character string of this interface's name. Access: Offline. AC INI-Param: InterfaceTable_InterfaceNamerw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.11 |
acSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.3.2 |
acSyslogServerIPAddressThis parameter defines the IP address in dotted format notation. e.g., 192.10.1.255 Range = Legal IP address. Access: Instant. AC INI-Param: SYSLOGSERVERIPrw IpAddress .1.3.6.1.4.1.5003.9.10.10.1.3.2.1 |
acSyslogEnableEnable SysLog protocol log. Access: Online. AC INI-Param: ENABLESYSLOGrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.2.2 |
acSyslogAcSyslogServerPortNumberDefines the Port number of the Syslog Server. Range = Legal Port Number. Access: Instant. AC INI-Param: SyslogServerPortrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.2.3 |
acSysNTP OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.3.3 |
acSysNTPServerIPAddressThis parameter is used to define the NTP server's IP address. Range = Legal IP address. Access: Instant. AC INI-Param: NTPServerIPrw IpAddress .1.3.6.1.4.1.5003.9.10.10.1.3.3.1 |
acSysNTPUtcOffsetThis parameter is used to define the NTP time to offset, in seconds. Default = 0 Range = -43200 to +43200 seconds. Access: Instant. AC INI-Param: NTPServerUTCOffsetrw Integer32 (-43200..43200) .1.3.6.1.4.1.5003.9.10.10.1.3.3.2 |
acSysNTPUpdateIntervalThis parameter defines the NTP update interval, in seconds. It's inadvisable to set it exceeding 1 month (2592000 seconds). Range = 0 to 2592000 seconds Default = 86400 seconds. Access: Instant. AC INI-Param: NTPUpdateIntervalrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.3.3 |
acSysDayLightSavingTime OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.3.3.21 |
acSysDayLightSavingTimeModeDetermines whether to enable the time ajustment to day light saving time while update time from NTP server. Access: Instant. AC INI-Param: DayLightSavingTimeEnablerw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.3.21.1 |
acSysDayLightSavingTimeOffsetwhen DayLightSavingTimeEnable is Enable, this parametes determine the fix size in minutes: 0-120. Access: Instant. AC INI-Param: DayLightSavingTimeOffsetrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.3.21.2 |
acSysDayLightSavingTimeStartThis parameter defines the date and time of starting day light time in current year. Format mo:dd:hh:mm. Access: Instant. AC INI-Param: DayLightSavingTimeStartrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.3.21.3 |
acSysDayLightSavingTimeEndThis parameter defines the date and time of ending day light time in current year. Format mo:dd:hh:mm. Access: Instant. AC INI-Param: DayLightSavingTimeEndrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.3.21.4 |
acSysWEB OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.3.4 |
acSysWEBConfigDisableEnables or disables Web Configuration. 0 = Read & Write mode (default) 1 = Read Only mode. Access: Offline. AC INI-Param: DISABLEWEBCONFIGrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.4.1 |
acSysWEBHTTPSOnlyUse this parameter to allow only HTTPS connections (force security). When set to 1, unencrypted HTTP (normally, port 80) is blocked. Access: Offline. AC INI-Param: HTTPSOnlyrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.4.2 |
acSysWEBHTTPSPortDetermine the local Secure HTTPS port of the device. The default port is 443. Range = 1-65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: HTTPSPORTrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.4.3 |
acSysWEBWebUseRadiusLoginUses the RADIUS (Remote Authentication Dial-In User Server/Service) for Web interface authentication. Make sure that ENABLERADIUS is on. Use of this parameter without HTTPSONLY = 1 is not recommended. Access: Instant. AC INI-Param: WEBRADIUSLOGINrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.4.4 |
acSysWEBHTTPSCipherStringRequires client certificates for HTTPS connection. The client certificate must be preloaded on the gateway, and its matching private key must be installed on the managing computer. Time and date must be correctly set on the gateway, for the client certificate to be verified. Access: Offline. AC INI-Param: HTTPSCipherStringrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.4.5 |
acSysWEBDenyAuthenticationTimerDefines the time the next authentication attempt from the last authentication faild IP should be denied. The range can be any value from 0 - 86400 in seconds. Access: Online. AC INI-Param: DenyAuthenticationTimerrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.4.6 |
acSysWEBWanHttpPortDetermines the WAN HTTP port of the device. If set to 0, WAN HTTP access will not be possible. Range = 0 to 65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: WanMgmtHttpPortrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.4.7 |
acSysWEBWanHttpsPortDetermines the WAN HTTPS port of the device. If set to 0, WAN HTTPS access will not be possible. Range = 0 to 65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: WanMgmtHttpsPortrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.4.8 |
acSysWEBACLTableAccess control list for the WEB. SEQUENCE OF AcSysWEBACLEntry .1.3.6.1.4.1.5003.9.10.10.1.3.4.21 |
acSysWEBACLEntry AcSysWEBACLEntry .1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1 |
acSysWEBACLIndexWEB ACL (Access Control List) index. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1.1 |
acSysWEBACLIPAllows IP addresses to connect to the Web interface. Set to zeroes to allow all IP addresses. Range: Valid IP address . Access: Instant. AC INI-Param: WEBACCESSLISTrw IpAddress .1.3.6.1.4.1.5003.9.10.10.1.3.4.21.1.2 |
acSysWEBAccess OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.3.5 |
acSysWEBAccessTable SEQUENCE OF AcSysWEBAccessEntry .1.3.6.1.4.1.5003.9.10.10.1.3.5.1 |
acSysWEBAccessEntry AcSysWEBAccessEntry .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1 |
acSysWEBAccessRowStatusWEB Basic row-status. AC INI-Param: WEBAccessRowStatusrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.1 |
acSysWEBAccessActionWEB Access action. AC INI-Param: WEBAccessActionrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.2 |
acSysWEBAccessActionResultWEB Access action result. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.3 |
acSysWEBAccessIndexWEB Access index. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.4 |
acSysWEBAccessUserNameWEB Basic user name. Range = String[26]. Access: Instant. AC INI-Param: WEBAccessUserNamerw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.5 |
acSysWEBAccessUserCodeWEB Basic userAccess. Access: Instant. AC INI-Param: WEBAccessUserCoderw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.6 |
acSysWEBAccessWebAuthModeSelects HTTP basic (clear text) or digest (MD5) authentication for the web interface. When set to 0, basic authentication (clear text) will be used. When set to 1, digest authentication (MD5) will be used. When set to 2, digest authentication (MD5) will be used for HTTP, while basic authentication will be used for HTTPS. Note that turning on RADIUS login forces basic authentication. Access: Instant. AC INI-Param: WebAuthModerw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.5.1.1.7 |
acSysNATTraversal OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.3.6 |
acSysSTUN OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.3.6.21 |
acSysSTUNEnableThis parameter is used to enable the STUN module, used for NAT traversal of UDP packets. Access: Offline. AC INI-Param: ENABLESTUNrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.6.21.1 |
acSysSTUNPrimaryServerIPDefines the primary STUN Server IP address. Range = Legal IP address. Access: Offline. AC INI-Param: STUNSERVERPRIMARYIPrw IpAddress .1.3.6.1.4.1.5003.9.10.10.1.3.6.21.2 |
acSysSTUNSecondaryServerIPDefines the secondary STUN server IP address. Range = Legal IP address. Access: Offline. AC INI-Param: STUNSERVERSECONDARYIPrw IpAddress .1.3.6.1.4.1.5003.9.10.10.1.3.6.21.3 |
acSysSTUNBindingLifeTimeThis parameter is used to define the NAT binding lifetime, in seconds. STUN refreshes the binding information after this time expires. Range = 0 - 2592000. Access: Offline. AC INI-Param: NATBINDINGDEFAULTTIMEOUTrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.6.21.4 |
acSysTelnet OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.3.7 |
acSysTelnetServerEnableEnables or disables the embedded Telnet server. Telnet is disabled by default for security reasons. 0 = Disable 1= Enable 2 = SSL mode (if available - requires an SSL-aware Telnet client software) SSL mode is not available on the MP-108 / MP-124 media gateways. Access: Instant. AC INI-Param: TelnetServerEnablerw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.7.1 |
acSysTelnetServerPortDefines the port number for the embedded Telnet server. Range = Valid port number. Access: Online. AC INI-Param: TELNETSERVERPORTrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.7.2 |
acSysTelnetServerIdleDisconnectThis parameter is used to set the timeout for disconnection of an idle Telnet session (minutes). When set to zero, idle sessions are not disconnected. Range: Any number. Access: Offline. AC INI-Param: TelnetServerIdleDisconnectrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.7.3 |
acSysTelnetSSHServerPortDefines the port number for the embedded SSH server. Range = Valid port number. Access: Online. AC INI-Param: SSHServerPortrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.7.4 |
acSysTelnetSSHServerEnableEnables or disables the embedded SSH server. 0 = Disable 1= Enable . Access: Online. AC INI-Param: SSHServerEnablerw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.7.5 |
acSysTelnetSSHAdminKeyThis parameter holds an RSA public key for strong authentication to the SSH interface (if enabled). The value should be a base64-encoded string see the Security appendix for additional information. Access: Instant. AC INI-Param: SSHAdminKeyrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.7.6 |
acSysTelnetSSHRequirePublicKeyEnables or disables RSA public keys in SSH. When set to 0, RSA public keys are optional (if SSHAdminKey is set). When set to 1, RSA public keys are mandatory. Access: Instant. AC INI-Param: SSHRequirePublicKeyrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.7.7 |
acSysTelnetServerWanPortDetermines the WAN Telnet port of the device. If set to 0, WAN Telnet access will not be possible. Range = 0 to 65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: WanMgmtTelnetPortrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.7.8 |
acSysTelnetWanSSHServerPortDetermines the WAN Telnet port of the device. If set to 0, WAN Telnet access will not be possible. Range = 0 to 65535 (other restrictions may apply in this range). Access: Offline. AC INI-Param: WanMgmtSSHPortrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.7.9 |
acSysHTTPClient OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.3.8 |
acSysHTTPClientAutoUpdatePredefinedTimeSchedules an automatic update to a predefined time of the day. The range is 'HH:MM' (24-hour format). For example: 20:18 . Access: Offline. AC INI-Param: AutoUpdatePredefinedTimerw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.1 |
acSysHTTPClientAutoUpdateFrequencyDetermines the number of minutes the gateway waits between automatic updates. The default value is 0 (the update at fixed intervals mechanism is disabled). Range: Any number . Access: Offline. AC INI-Param: AutoUpdateFrequencyrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.8.2 |
acSysHTTPClientAutoUpdateCmpFileEnables / disables the automatic update mechanism for the cmp file. 0 = The automatic update mechanism doesn't apply to the cmp file (default). 1 = The automatic update mechanism includes the cmp file. Access: Offline. AC INI-Param: AutoUpdateCmpFilerw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.8.3 |
acSysHTTPClientCmpFileURLThis parameter provides a link to a software image (CMP file) to be downloaded from a remote server. . Access: Offline. AC INI-Param: CmpFileURLrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.4 |
acSysHTTPClientIniFileURLThis parameter provides a link to an ini file to be downloaded from a remote server. . Access: Offline. AC INI-Param: IniFileURLrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.5 |
acSysHTTPClientIniFileTemplateURLProvides a link to an ini file to be downloaded from a remote server, in addition to IniFileUrl. Range = http://server_name/file, https://server_name/file. Access: Offline. AC INI-Param: IniFileTemplateUrlrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.6 |
acSysHTTPClientCPTFileURLProvides a link to a Call Progress Tones (CPT) file to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: CptFileUrlrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.7 |
acSysHTTPClientVPFileURLProvides a link to a Voice Prompts file to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: VpFileUrlrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.8 |
acSysHTTPClientPRTFileURLProvides a link to a prerecorded tones dat file, to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: PrtFileUrlrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.9 |
acSysHTTPClientFXSCoeffFileURLProvides a link to an FXS coefficients file, to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: FXSCoeffFileUrlrwdeprecated SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.10 |
acSysHTTPClientFXOCoeffFileURLProvides a link to an FXO coefficients file, to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: FXOCoeffFileUrlrwdeprecated SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.11 |
acSysHTTPClientCASFileURLProvides a link to a Channel Associated Signaling (CAS) file to be downloaded from a remote server. Range = http://server_name/file, https://server_name/file. Access: Instant. AC INI-Param: CasFileUrlrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.12 |
acSysHTTPClientXMLFileUrlProvides a link to an XML segments file, to be downloaded from a remote server. See the chapter 'Automatic Update Facility' for supported URL options. Access: Instant. AC INI-Param: APSSegmentsFileUrlrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.13 |
acSysHTTPClientCoderTableFileUrlProvides a link to a coder table (CTBL) file that is to be downloaded from a remote server. . Access: Instant. AC INI-Param: CoderTableFileUrlrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.14 |
acSysHTTPClientUserInfoFileURLProvides a link to the user information file, to be downloaded using Automatic Update. Relevant only for H323 or SIP controlled devices. Access: Offline. AC INI-Param: UserInfoFileUrlrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.15 |
acSysHTTPClientDialPlanFileURLURL for downloading a Dial Plan file using the Automatic Update facility. Access: Instant. AC INI-Param: DialPlanFileUrlrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.16 |
acSysHTTPClientTLSPkeyFileUrlURL for downloading a TLS private key file using the Automatic Update facility. Access: Offline. AC INI-Param: TLSPkeyFileUrlrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.17 |
acSysHTTPClientTLSCertFileUrlURL for downloading a TLS certificate file using the Automatic Update facility. Access: Offline. AC INI-Param: TLSCertFileUrlrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.18 |
acSysHTTPClientTLSRootFileUrlURL for downloading a TLS trusted root certificate file using the Automatic Update facility. Access: Offline. AC INI-Param: TLSRootFileUrlrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.19 |
acSysHTTPClientWebLogoFileUrlURL for downloading a logo file for the web interface using the Automatic Update facility. Access: Offline. AC INI-Param: WebLogoFileUrlrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.20 |
acSysHTTPClientVideoFontFileURLIndicates the URL for downloading a logo file for the web interface using the Automatic Update facility. Access: Offline. AC INI-Param: VideoFontFileUrlrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.21 |
acSysHTTPClientV5PortConfFileURLProvides a link to a software (V5PortConfiguration file) to be downloaded from a remote server. Access: Instant. AC INI-Param: V5PortConfigurationFileURLrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.22 |
acSysHTTPClientDataConfigurationFileUrlProvides a link to a data configuration file to be downloaded from a remote server using the Automatic Update facility. Access: Instant. AC INI-Param: RGCONFFILEURLrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.8.23 |
acSysSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.3.9 |
acSysSNMPKeepAliveTrapPortThe port to which the keep alive traps are sent to. Access: Instant. AC INI-Param: KeepAliveTrapPortrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.9.1 |
acSysSNMPEmsColdStrartIndicationEMS object to be used as indication to the device's state in the 'eyes' of the EMS. Default - 0. Access: Instant. AC INI-Param: N/Arw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.9.2 |
acSysSNMPWanPortThis parameter specifies the WAN port number for SNMP requests and responses. If set to 0, WAN access to SNMP is disabled. Range = 0 to 65535. Access: Offline. AC INI-Param: WanMgmtSnmpPortrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.9.3 |
acSysVLAN OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.3.10 |
acSysVLANOamVlanIdSets the OAMP (Operation, Administration, Management and Provisioning) VLAN identifier. Range: 1 to 4094. Access: Online. AC INI-Param: VLANOAMVLANIDrwobsolete Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.1 |
acSysVLANControlVlanIdSets the control VLAN identifier. Range: 1 to 4094. Access: Online. AC INI-Param: VLANCONTROLVLANIDrwobsolete Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.2 |
acSysVLANMediaVlanIdSets the media VLAN identifier. Range: 1 to 4094. Access: Online. AC INI-Param: VLANMEDIAVLANIDrwobsolete Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.3 |
acSysVLANNetworkServiceClassPriorityThis parameter is used to set the priority for Network service class content. Range = 0 to 7 Default = 7. Access: Online. AC INI-Param: VLANNETWORKSERVICECLASSPRIORITYrwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.4 |
acSysVLANPremiumServiceClassMediaPrioritySets the priority for the Premium service class content and media traffic. Range = 0 to 7 Default = 6. Access: Online. AC INI-Param: VLANPREMIUMSERVICECLASSMEDIAPRIORITYrwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.5 |
acSysVLANGoldServiceClassPrioritySets the priority for the Gold service class content. Range = 0 to 7 Default = 4. Access: Online. AC INI-Param: VLANGOLDSERVICECLASSPRIORITYrwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.6 |
acSysVLANBronzeServiceClassPrioritySets the priority for the Bronze service class content. Range = 0 to 7 Default = 2. Access: Online. AC INI-Param: VLANBRONZESERVICECLASSPRIORITYrwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.7 |
acSysVLANPremiumServiceClassControlPrioritySets the priority for the Premium service class content and control traffic. Range = 0 to 7 Default = 6. Access: Online. AC INI-Param: VLANPREMIUMSERVICECLASSCONTROLPRIORITYrwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.8 |
acSysVLANNetworkServiceClassDiffServThis parameter is used to set the DiffServ for Network service class content. Range = 0 to 63 Default = 48. Access: Online. AC INI-Param: NETWORKSERVICECLASSDIFFSERVrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.9 |
acSysVLANPremiumServiceClassMediaDiffServThis parameter is used to set the DiffServ for Premium service class content and media traffic. Range = 0 to 63. Access: Online. AC INI-Param: PREMIUMSERVICECLASSMEDIADIFFSERVrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.10 |
acSysVLANPremiumServiceClassControlDiffServSets the DiffServ for the Premium service class content and control traffic. Range: 0 to 63. Access: Online. AC INI-Param: PREMIUMSERVICECLASSCONTROLDIFFSERVrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.11 |
acSysVLANGoldServiceClassDiffServSets the DiffServ for the Gold service class content. Range = 0 to 63 Default = 26. Access: Online. AC INI-Param: GOLDSERVICECLASSDIFFSERVrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.12 |
acSysVLANBronzeServiceClassDiffServSets the DiffServ for the Bronze service class content. Range = 0 to 63 Default = 10. Access: Online. AC INI-Param: BRONZESERVICECLASSDIFFSERVrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.13 |
acSysVLANVlanNativeVlanIdSets the native VLAN identifier. Access: Online. AC INI-Param: VLANNATIVEVLANIDrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.14 |
acSysVLANModeSets the VLAN functionality. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: VLANMODErw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.15 |
acSysVlanMapTable SEQUENCE OF AcSysVlanMapEntry .1.3.6.1.4.1.5003.9.10.10.1.3.10.21 |
acSysVlanMapEntry AcSysVlanMapEntry .1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1 |
acSysVlanMapIndexIndex Field for line. Internal parameter. AC INI-Param: DiffServToVlanPriority_Index Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.1 |
acSysVlanMapRowStatusROWSTATUS field for line. Internal parameter. AC INI-Param: N/Arw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.2 |
acSysVlanMapActionMangement Field for ACTIONS. Internal parameter. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.3 |
acSysVlanMapActionResMangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.4 |
acSysVlanMapDiffServMapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p). Access: Online. AC INI-Param: DiffServToVlanPriority_DiffServrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.5 |
acSysVlanMapVlanPriorityMapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p). Access: Online. AC INI-Param: DiffServToVlanPriority_VlanPriorityrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.10.21.1.6 |
acSysSCTP OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.3.11 |
acSysSCTPHeartBeatIntervalDefines the SCTP heartbeat interval. Range: 1 to 3600. Access: Offline. AC INI-Param: SCTPHBIntervalrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.11.1 |
acSysSCTPT4SACKTimerDefines the SCTP T4 SACK timer interval. Range: 1 to 5. Access: Offline. AC INI-Param: SCTPT4SAckTimerrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.11.2 |
acSysSCTPCheckSumMethodStream Control Transmission Protocol (SCTP) uses a checksum mechanism in order to authenticate packets on both sides (the receiving side and the transmitting side). Presently, two checksum mechanisms are available: 0 = adler32 checksum mechanism 1 = crc32c checksum mechanism (improved mechanism). Access: Offline. AC INI-Param: SCTPChecksumMethodrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.11.3 |
acSysSCTPHostNameWhen this parameter is set to any value other than an empty string, SCTP (Stream Control Transmission Protocol) uses the value as the value of the FQDN (Fully Qualified Domain Name) parameter attached to the INIT chunk. In this case, the FQDN parameter replaces any IP address parameters in the INIT chunk. This feature enables overcoming NAT problems where the original IP addresses belonging to the endpoint supports are converted into pseudo addresses. When this parameter is not set (default), the INIT chunk is sent without any FQDN parameter. Range = String[42]. Access: Offline. AC INI-Param: SCTPHOSTNAMErw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.3.11.4 |
acSysSCTPAssociationsNumDefines the maximum number of Stream Control Transmission Protocol (SCTP) associations that can be opened. Range: 1 to 8. Access: Offline. AC INI-Param: SCTPAssociationsNumrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.3.11.5 |
acSysEthernetPort OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.3.12 |
acSysEthernetPortPhyConfigurationControls the Ethernet connection mode type. Auto-negotiate falls back to Half-Duplex mode (HD) when the opposite port is not in Auto-negotiate mode. The speed (10 Base-T or 100 Base-TX) in this mode is always configured correctly. 0 = 10 Base-T half-duplex 1 = 10 Base-T full-duplex 2 = 100 Base-TX half-duplex 3 = 100 Base-TX full-duplex 4 = Auto-negotiate. Access: Offline. AC INI-Param: EthernetPhyConfigurationrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.3.12.1 |
acSysMiscConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.4 |
acSysDiagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.4.1 |
acSysDiagnosticsEnableChecks the correct functionality of the different hardware components on the board. On completion of the check, the board sends an EV_END_BIT value, which contains information on the test results of each hardware component. 0 = No diagnostics (default) 1 = Perform diagnostics (full test of DSPs, PCM, Switch, LAN, PHY and Flash) 2 = Perform diagnostics (full test of DSPs, PCM, Switch, LAN, PHY, but partial, test of Flash, a quicker mode). Access: Offline. AC INI-Param: ENABLEDIAGNOSTICSrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.4.1.1 |
acSysDiagnosticsEnablePerformanceThresholdAlarmsThis parameter enables sending SNMP traps and Syslog messages when performance of the device is degraded (according to the configured thresholds). Access: Instant. AC INI-Param: PM_EnableThresholdAlarmsrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.4.1.2 |
acSysDiagnosticsListOfActivitiesToLogThis parameter defines what activities are to be reported by the device in the form of a log message. Parameter format is x,y,z-... where x,y,z are activity codes to be reported by the device. Supported activity codes: PVC - Parameter Value Changes. AFL - Auxiliary Files Loading. DR - Device Reset. FB - Flash Burning. SWU - SoftWareUpdate. ARD - Access to Restricted Domains. NAA - Non Authorized Access. SPC - Sensitive Parameters Changes. Access: Online. AC INI-Param: ActivityListToLogrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.4.1.3 |
acSysGenericINI OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.4.2 |
acSysGenericINILineFlexible INI file line. Access: Offline. AC INI-Param: N/Arw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.4.2.1 |
acSysGenericINISecureStartupEnables or disables secure startup mode. In this mode, downloading of the INI file is restricted to a URL provided in prior configuration (see parameter IniFileURL) or via DHCP. Access: Offline. AC INI-Param: EnableSecureStartuprw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.4.2.2 |
acSysLicenseKey OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.5 |
acSysLicenseKeyStringCoded Key specific for board and required features. Access: Offline. AC INI-Param: N/Arw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.5.1 |
acSysLicenseKeyActiveListList of all avtivated features. AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.5.2 |
acSysFile OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.6 |
acSysFileCptDefines Call Progress Tone filenames (downloaded by TFTP). AC INI-Param: CALLPROGRESSTONESFILENAMEro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.6.1 |
acSysFileVpDefines the name (and path) of the file containing the Voice Prompts. Range = String of ASCII characters. AC INI-Param: VOICEPROMPTSFILENAMEro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.6.2 |
acSysFilePrerecordedTonesDefines the name (and path) of the file containing the Prerecorded Tones. Range = String of ASCII characters. AC INI-Param: PrerecordedTonesFileNamero SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.6.3 |
acSysFileXmlThis parameter is used to indicate the name of the file containing the XML file. AC INI-Param: XMLFileNamero SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.6.4 |
acSysFileExternalCoderCoders table file name. AC INI-Param: CODERTBLFILENAMEro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.6.5 |
acSysFileUserInfoThe file name to be loaded. AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.6.6 |
acSysFileDialPlanFileNameThis parameter is used to indicate the name of the file containing the Dial Plan. AC INI-Param: gDialPlanFileNamero SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.6.7 |
acSysFileTLSPkeyFileNameThis parameter defines the name of a private key file (internal). Set to blank to regenerate the key and certificate. AC INI-Param: HTTPSPkeyFileNamero SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.6.8 |
acSysFileTLSCertFileNameDefines the name of the HTTPS server certificate file to be downloaded via TFTP. The file must be in base64-encoded PEM format. Range = String[47]. AC INI-Param: HTTPSCertFileNamero SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.6.9 |
acSysFileTLSRootFileNameDefines the name of the HTTPS trusted root certificate file to be downloaded via TFTP. The file must be in base64-encoded PEM format. Range = String[47]. AC INI-Param: HTTPSRootFileNamero SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.6.10 |
acSysFileFirstVideoFontFileNameIndicates the name of the first file containing the Video Font file index. AC INI-Param: VideoFontFIleNamero SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.6.11 |
acSysFileSecondVideoFontFileNameIndicates the name of the second file containing the Video Font file index. AC INI-Param: VideoFontFIleNamero SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.6.12 |
acSysFileThirdVideoFontFileNameIndicates the name of the first file containing the Video Font file index. AC INI-Param: VideoFontFIleNamero SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.6.13 |
acSysFileV5PortConfFileNameIndicates the name and location of the V5 Port Configuration file. AC INI-Param: V5PortConfigurationFileNamero SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.6.14 |
acSysSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.7 |
acSysSecurityTLSVersionThis parameter defines the supported versions of SSL/TLS. When set to 0, SSL/TLS handshakes always start with SSL 2.0 and switch to TLS 1.0 if both peers support it. When set to 1, TLS 1.0 is the only version supported clients attempting to contact the device using SSL 2.0 will be rejected. Possible values: 0 = SSL 2.0, SSL 3.0, and TLS 1.0 are supported (default) 1 = TLS 1.0 will always be used. Access: Offline. AC INI-Param: TLSVersionrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.1 |
acSysSecurityOcspEnableEnables or disables certificate checking via OCSP. Access: Instant. AC INI-Param: OcspEnablerw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.2 |
acSysSecurityOcspServerIPTypeThis parameter defines the OCSP server's IP address Type. Currently - IPv4 only. Access: Instant. AC INI-Param: N/Arw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.5003.9.10.10.1.7.3 |
acSysSecurityOcspServerIPThis parameter defines the OCSP server's IP address. Range = Legal IP address. Access: Instant. AC INI-Param: OcspServerIPrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.5003.9.10.10.1.7.4 |
acSysSecurityOcspServerPortThis parameter defines the OCSP server's TCP port number. Range = 1 to 32767 . Access: Instant. AC INI-Param: OcspServerPortrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.5 |
acSysSecurityOcspDefaultResponseDetermines default OCSP behavior when the server cannot be contacted. 0 = reject peer certificate. 1 = allow peer certificate. . Access: Instant. AC INI-Param: OcspDefaultResponserw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.6 |
acSysSecurityTLSFIPS140ModeDetermines whether to enable the FIPS140 mode for TLS. Access: Offline. AC INI-Param: TLS_Fips140_Moderw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.7 |
acSysSecurityGenCsrSubjectNamegenerate CSR Subject Name. Access: Instant. AC INI-Param: N/Arw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.7.8 |
acSysSecuritySelfSignedCertificateSubjectNameAccess: Instant. AC INI-Param: N/Arw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.7.9 |
acSysSecurityOcspSecondaryServerIPTypeThis parameter defines the OCSP secondary server's IP address Type. Currently - IPv4 only. Access: Instant. AC INI-Param: N/Arw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.5003.9.10.10.1.7.10 |
acSysSecurityOcspSecondaryServerIPThis parameter defines the OCSP secondary server IP address. Range = Legal IP address. Access: Instant. AC INI-Param: OcspSecondaryServerIPrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.5003.9.10.10.1.7.11 |
acSysSecurityHTTPSRequireClientCertificateRequires client certificates for HTTPS connection. The client certificate must be preloaded on the gateway, and its matching private key must be installed on the managing computer. Time and date must be correctly set on the gateway, for the client certificate to be verified. Access: Offline. AC INI-Param: HTTPSRequireClientCertificaterw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.12 |
acSysSecurityAUPDVerifyCertificatesThis parameter configures the AutoUpdate facility to verify server certificates when using HTTPS. Access: Offline. AC INI-Param: AUPDVerifyCertificatesrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.13 |
acSysIKE OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.7.21 |
acSysIKEPolicyTabledeprecated SEQUENCE OF AcSysIKEPolicyEntry .1.3.6.1.4.1.5003.9.10.10.1.7.21.1 |
acSysIKEPolicyEntrydeprecated AcSysIKEPolicyEntry .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1 |
acSysIKEPolicyIndexThis parameter is used for the Internet Key Encryption (IKE) Index Field for line. Internal parameter. AC INI-Param: IKE_DB_INDEXdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.1 |
acSysIKEPolicyRowStatusThis parameter is used for the Internet Key Encryption (IKE) ROWSTATUS Field for line. Internal parameter. AC INI-Param: IKE_DB_ROWSTATUSrwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.2 |
acSysIKEPolicyActionThis parameter is used for the Internet Key Encryption (IKE) Mangement Field for ACTIONS. Internal parameter. AC INI-Param: IKE_DB_ACTIONrwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.3 |
acSysIKEPolicyActionResThis parameter is used for the Internet Key Encryption (IKE) Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: IKE_DB_ACTION_RESULTrodeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.4 |
acSysIKEPolicyShardKeyIKE Policy - Shared Key. Access: Instant. AC INI-Param: IKEPOLICYSHAREDKEYrwdeprecated SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.5 |
acSysIKEPolicyLifeInSecondsIKE Policy - IKE SA LifeTime in seconds. Access: Instant. AC INI-Param: IKEPOLICYLIFEINSECrwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.6 |
acSysIKEPolicyLifeInKBIKE Policy - IKE SA LifeTime in KB. Access: Instant. AC INI-Param: IKEPOLICYLIFEINKBrwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.7 |
acSysIKEPolicyProposal0EncryptionIKE Policy - Proposal 0 encryption type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_0rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.8 |
acSysIKEPolicyProposal1EncryptionIKE Policy - Proposal 1 encryption type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_1rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.9 |
acSysIKEPolicyProposal2EncryptionIKE Policy - Proposal 2 encryption type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_2rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.10 |
acSysIKEPolicyProposal3EncryptionIKE Policy - Proposal 3 encryption type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_3rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.11 |
acSysIKEPolicyProposal0AuthenticationIKE Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_0rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.12 |
acSysIKEPolicyProposal1AuthenticationIKE Policy - Proposal 1 authentication type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_1rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.13 |
acSysIKEPolicyProposal2AuthenticationIKE Policy - Proposal 2 authentication type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_2rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.14 |
acSysIKEPolicyProposal3AuthenticationIKE Policy - Proposal 3 authentication type. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_3rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.15 |
acSysIKEPolicyProposal0DHGroupIKE Policy - Proposal 0 Diffie Hellman Group. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALDHGROUP_0rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.16 |
acSysIKEPolicyProposal1DHGroupIKE Policy - Proposal 1 Diffie Hellman Group. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALDHGROUP_1rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.17 |
acSysIKEPolicyProposal2DHGroupIKE Policy - Proposal 2 Diffie Hellman Group. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALDHGROUP_2rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.18 |
acSysIKEPolicyProposal3DHGroupIKE Policy - Proposal 3 Diffie Hellman Group. Access: Instant. AC INI-Param: IKEPOLICYPROPOSALDHGROUP_3rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.19 |
acSysIKEPolicyAuthenticationMethodThis parameter is used for Internet Key Encryption (IKE) Policy - IKE Authentication Method (Preshared key/ RSA). Access: Offline. AC INI-Param: IKEPOLICYAUTHENTICATIONMETHODrwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.21.1.1.20 |
acSysIPSec OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.7.22 |
acSysIPSecEnableIPsec Enable flag. Access: Offline. AC INI-Param: ENABLEIPSECrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.1 |
acSysIPSecDpdModeIPsec Dead Peer Detection (RFC 3706) - Mode of Operation. One of the following values: '0' - Disabled (Default) '1' - Periodic '2' - On demand. Access: Instant. AC INI-Param: IPSECDPDMODErw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.2 |
acSysIPSecIKECertificateExtValidateEnables or disables certificate extension checking for IKE. Access: Instant. AC INI-Param: IKEcertificateExtValidaterw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.3 |
acSysIPSecSPDTabledeprecated SEQUENCE OF AcSysIPSecSPDEntry .1.3.6.1.4.1.5003.9.10.10.1.7.22.21 |
acSysIPSecSPDEntrydeprecated AcSysIPSecSPDEntry .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1 |
acSysIPSecSPDIndexSecurity Policy Database (SPD) Index Field for line. Internal parameter. AC INI-Param: SPD_INDEXdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.1 |
acSysIPSecSPDRowStatusSecurity Policy Database (SPD) ROWSTATUS field for line. Internal parameter. AC INI-Param: SPD_ROWSTATUSrwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.2 |
acSysIPSecSPDActionSecurity Policy Database (SPD) Mangement Field for ACTIONS. Internal parameter. AC INI-Param: SPD_ACTIONrwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.3 |
acSysIPSecSPDActionResSecurity Policy Database (SPD) Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: SPD_ACTION_RESULTrodeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.4 |
acSysIPSecSPDPolicyRemoteIPAddrThis parameter is used for Secure Internet Protocol (IPsec) Policy Policy - Remote IP address as IP or Host Name. Access: Instant. AC INI-Param: IPSECPOLICYREMOTEIPADDRESSrwdeprecated SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.5 |
acSysIPSecSPDPolicySrcPortThis parameter is used for Secure Internet Protocol (IPsec) Policy Policy - Source Port. Access: Instant. AC INI-Param: IPSECPOLICYSRCPORTrwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.6 |
acSysIPSecSPDPolicyDestPortThis parameter is used for Secure Internet Protocol (IPsec) Policy Policy - Destination Port. Access: Instant. AC INI-Param: IPSECPOLICYDSTPORTrwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.7 |
acSysIPSecSPDPolicyProtocolThis parameter is used for Secure Internet Protocol (IPsec) Policy Policy - Protocol. Access: Instant. AC INI-Param: IPSECPOLICYPROTOCOLrwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.8 |
acSysIPSecSPDKeyExchangeMethodIndexThis parameter is used for the Secure Internet Protocol (IPsec) Policy - Index into the Key Exchange Method Table (IKE Table). Access: Offline. AC INI-Param: IPSECPOLICYKEYEXCHANGEMETHODINDEXrwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.9 |
acSysIPSecSPDLifeInSecondsIPsec Policy - IPSec SA LifeTime in seconds. Access: Instant. AC INI-Param: IPSECPOLICYLIFEINSECrwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.10 |
acSysIPSecSPDLifeInKBIPsec Policy - IPSec SA LifeTime in KB. Access: Instant. AC INI-Param: IPSECPOLICYLIFEINKBrwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.11 |
acSysIPSecSPDProposal0EncryptionIPsec Policy - Proposal 0 encryption type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_0rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.12 |
acSysIPSecSPDProposal1EncryptionIPsec Policy - Proposal 1 encryption type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_1rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.13 |
acSysIPSecSPDProposal2EncryptionIPsec Policy - Proposal 2 encryption type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_2rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.14 |
acSysIPSecSPDProposal3EncryptionIPsec Policy - Proposal 3 encryption type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_3rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.15 |
acSysIPSecSPDProposal0AuthenticationIPsec Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_0rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.16 |
acSysIPSecSPDProposal1AuthenticationIPsec Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_1rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.17 |
acSysIPSecSPDProposal2AuthenticationIPsec Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_2rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.18 |
acSysIPSecSPDProposal3AuthenticationIPsec Policy - Proposal 0 authentication type. Access: Instant. AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_3rwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.19 |
acSysIPSecSPDPolicyLocalIPAddrTypeThis parameter is used for Secure Internet Protocol (IPsec) Policy - Local IP address type (OAM/Control). Access: Offline. AC INI-Param: IPSECPOLICYLOCALIPADDRESSTYPErwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.20 |
acSysIPSecSPDModeThis parameter is used for Secure Internet Protocol (IPsec) Policy - Mode of Operation (Transport/Tunneling). '0' - Transport '1' - Tunneling. Access: Instant. AC INI-Param: IPSECMODErwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.21 |
acSysIPSecSPDPolicyRemoteTunnelIPAddressThis parameter is used for Secure Internet Protocol (IPsec) Policy - IP Address of the Remote IPSec Tunnel Endpoint. Access: Instant. AC INI-Param: IPSECPOLICYREMOTETUNNELIPADDRESSrwdeprecated IpAddress .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.22 |
acSysIPSecSPDPolicyLocalTunnelIPAddressThis parameter is used for Secure Internet Protocol (IPsec) Policy - IP Address of the Remote IPSec Tunnel Endpoint. Access: Instant. AC INI-Param: IPSECPOLICYLOCALTUNNELIPADDRESSrwdeprecated IpAddress .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.23 |
acSysIPSecSPDPolicyRemoteTunnelSubnetMaskThis parameter is used for Secure Internet Protocol (IPsec) Policy - Subnet Mask of the Remote IPSec Address. Access: Instant. AC INI-Param: IPSECPOLICYREMOTESUBNETMASKrwdeprecated IpAddress .1.3.6.1.4.1.5003.9.10.10.1.7.22.21.1.24 |
acSysIPsecProposalTableIPsec Proposal table SEQUENCE OF AcSysIPsecProposalEntry .1.3.6.1.4.1.5003.9.10.10.1.7.22.22 |
acSysIPsecProposalEntry AcSysIPsecProposalEntry .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1 |
acSysIPsecProposalIndexIndex Field for line. AC INI-Param: IPsecProposalTable_Index Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.1 |
acSysIPsecProposalRowStatusROWSTATUS Field for line. AC INI-Param: IPsecProposalTable_RowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.2 |
acSysIPsecProposalActionMangement Field for ACTIONS. AC INI-Param: IPsecProposalTable_Actionrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.3 |
acSysIPsecProposalActionResMangement Field for ACTIONS RESULT. AC INI-Param: IPsecProposalTable_ActionResro Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.4 |
acSysIPsecProposalEncryptionAlgorithmSelects the encryption (privacy) algorithm to use. Access: Online. AC INI-Param: IPsecProposalTable_EncryptionAlgorithmrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.5 |
acSysIPsecProposalAuthenticationAlgorithmSelects the message authentication (integrity) algorithm to use. Access: Online. AC INI-Param: IPsecProposalTable_AuthenticationAlgorithmrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.6 |
acSysIPsecProposalDiffieHellmanGroupSelects the Diffie-Hellman group to use. Access: Online. AC INI-Param: IPsecProposalTable_DHGrouprw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.22.1.7 |
acSysIPsecSATableIPsec SA table SEQUENCE OF AcSysIPsecSAEntry .1.3.6.1.4.1.5003.9.10.10.1.7.22.23 |
acSysIPsecSAEntry AcSysIPsecSAEntry .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1 |
acSysIPsecSAIndexIndex Field for line. AC INI-Param: IPsecSATable_Index Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.1 |
acSysIPsecSARowStatusROWSTATUS Field for line. AC INI-Param: IPsecSATable_RowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.2 |
acSysIPsecSAActionMangement Field for ACTIONS. AC INI-Param: IPsecSATable_Actionrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.3 |
acSysIPsecSAActionResMangement Field for ACTIONS RESULT. AC INI-Param: IPsecSATable_ActionResro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.4 |
acSysIPsecSARemoteEndpointAddressIP address or DNS host name of the peer. Access: Online. AC INI-Param: IPsecSATable_RemoteEndpointAddressOrNamerw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.5 |
acSysIPsecSAAuthenticationMethodSelects the method used for peer authentication during IKE main mode. Access: Online. AC INI-Param: IPsecSATable_AuthenticationMethodrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.6 |
acSysIPsecSASharedKeyDefines the pre-shared key (in textual format). Access: Online. AC INI-Param: IPsecSATable_SharedKeyrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.7 |
acSysIPsecSASourcePortDefines the source port to which this configuration applies. Access: Online. AC INI-Param: IPsecSATable_SourcePortrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.8 |
acSysIPsecSADestPortDefines the destination port to which this configuration applies. Access: Online. AC INI-Param: IPsecSATable_DestPortrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.9 |
acSysIPsecSAProtocolDefines the protocol type to which this configuration applies. Standard IP protocol numbers should be used, e.g.: 0 = Any protocol (default) 17 = UDP 6 = TCP . Access: Online. AC INI-Param: IPsecSATable_Protocolrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.10 |
acSysIPsecSAPhase1SaLifetimeInSecDetermines the duration (in seconds) for which the negotiated IKE SA (main mode) is valid. After the time expires, the SA is re-negotiated. Access: Online. AC INI-Param: IPsecSATable_Phase1SaLifetimeInSecrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.11 |
acSysIPsecSAPhase2SaLifetimeInSecDetermines the duration (in seconds) for which the negotiated IPSec SA (quick mode) is valid. After the time expires, the SA is re-negotiated. Access: Online. AC INI-Param: IPsecSATable_Phase2SaLifetimeInSecrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.12 |
acSysIPsecSAPhase2SaLifetimeInKBDetermines the maximum volume of traffic (in kilobytes) for which the negotiated IPSec SA (quick mode) is valid. Access: Online. AC INI-Param: IPsecSATable_Phase2SaLifetimeInKBrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.13 |
acSysIPsecSADPDmodeControls dead peer detection (DPD) as per RFC 3706. Access: Online. AC INI-Param: IPsecSATable_DPDmoderw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.14 |
acSysIPsecSAIPsecModeSelects the IPSec mode of operation. 0 = Transport mode (default) 1 = Tunnel mode . Access: Online. AC INI-Param: IPsecSATable_IPsecModerw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.15 |
acSysIPsecSARemoteTunnelAddressIP address of the peer router. Access: Online. AC INI-Param: IPsecSATable_RemoteTunnelAddressrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.16 |
acSysIPsecSARemoteSubnetIPAddressIP address of the remote subnetwork. Access: Online. AC INI-Param: IPsecSATable_RemoteSubnetIPAddressrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.17 |
acSysIPsecSARemoteSubnetPrefixLengthPrefix length of the Remote Subnet IP Address parameter (in bits). Access: Online. AC INI-Param: IPsecSATable_RemoteSubnetPrefixLengthrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.22.23.1.18 |
acFirewall OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.7.23 |
acSysAccessListTable SEQUENCE OF AcSysAccessListEntry .1.3.6.1.4.1.5003.9.10.10.1.7.23.1 |
acSysAccessListEntry AcSysAccessListEntry .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1 |
acSysAccessListIndexIndex Field for line. Internal parameter. AC INI-Param: ACCESSLIST_Index Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.1 |
acSysAccessListRowStatusROWSTATUS field for line. Internal parameter. AC INI-Param: N/Arw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.2 |
acSysAccessListActionMangement Field for ACTIONS. Internal parameter. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.3 |
acSysAccessListActionResMangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.4 |
acSysAccessListSourceIPSource IP for access rule. Access: Online. AC INI-Param: ACCESSLIST_Source_IPrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.5 |
acSysAccessListNetMaskMask for this access rule (bitwise ANDed with the source IP of the packet). Access: Online. AC INI-Param: ACCESSLIST_Net_Maskrw IpAddress .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.6 |
acSysAccessListStartPortPort range - start. Access: Online. AC INI-Param: ACCESSLIST_Start_Portrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.7 |
acSysAccessListEndPortPort range - end. Access: Online. AC INI-Param: ACCESSLIST_End_Portrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.8 |
acSysAccessListProtocolIP user-level protocol (TCP, UDP, ICMP, ESP, SIP, MGCP, TPNCP, ANY or numeric value). Access: Online. AC INI-Param: ACCESSLIST_Protocolrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.9 |
acSysAccessListPacketSizeMaximum packet size (0 = unused). Access: Online. AC INI-Param: ACCESSLIST_Packet_Sizerw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.10 |
acSysAccessListByteRateAllowed traffic in bytes per second (0 = unused). Access: Online. AC INI-Param: ACCESSLIST_Byte_Raterw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.11 |
acSysAccessListByteBurstAllowed traffic burst in bytes (0 = unused). Access: Online. AC INI-Param: ACCESSLIST_Byte_Burstrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.12 |
acSysAccessListAllowTypeAllow or block traffic matching this rule. Access: Online. AC INI-Param: ACCESSLIST_Allow_Typerw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.13 |
acSysAccessListMatchCountStatistics: number of matched packets. AC INI-Param: ACCESSLIST_MatchCountro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.23.1.1.14 |
acSysMediaEncription OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.7.24 |
acSysMediaEncriptionRTPAuthenticationDisableTxOn a secured RTP session, determines whether to enable Authentication on transmitted RTP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTPAuthenticationDisableTxrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.24.1 |
acSysMediaEncriptionRTPAuthenticationDisableRxOn a secured RTP session, determines whether to enable Authentication on received RTP packets 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTPAuthenticationDisableRxrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.24.2 |
acSysMediaEncriptionRTPEncryptionDisableTxOn a secured RTP session, determines whether to enable Encryption on transmitted RTP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTPEncryptionDisableTxrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.24.3 |
acSysMediaEncriptionRTPEncryptionDisableRxOn a secured RTP session, determines whether to enable Encryption on transmitted RTP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTPEncryptionDisableRxrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.24.4 |
acSysMediaEncriptionRTCPEncryptionDisableTxOn a secured RTP session, determines whether to enable Encryption on transmitted RTCP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTCPEncryptionDisableTxrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.24.5 |
acSysMediaEncriptionRTCPEncryptionDisableRxOn a secured RTP session, determines whether to enable Encryption on received RTCP packets. One of the following values: 0 = Enable 1 = Disable. Access: Online. AC INI-Param: RTCPEncryptionDisableRxrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.24.6 |
acSysSRTP OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.7.24.21 |
acSysSRTPPacketMKISizeDetermines the size of the parameter Master Key Identifier (MKI) in SRTP Tx packets. One of the following values: 0 = MKI Disabled 1 - 4 = size (bytes of MKI). Access: Online. AC INI-Param: SRTPTxPacketMKISizerw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.7.24.21.1 |
acSys802dot1x OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.7.25 |
acSys802dot1xModeEnables support for IEEE 802.1x physical port security. 0 = Disabled 1 = EAP-MD5 2 = Protected EAP (PEAP) 3 = EAP-TLS . Access: Instant. AC INI-Param: 802.1xModerw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.25.1 |
acSys802dot1xUsernameUsername for IEEE 802.1x support. Access: Instant. AC INI-Param: 802.1xUsernamerw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.7.25.2 |
acSys802dot1xPasswordPassword for IEEE 802.1x support. Access: Instant. AC INI-Param: 802.1xPasswordrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.7.25.3 |
acSys802dot1xVerifyPeerCertificateVerify Peer Certificate for IEEE 802.1x support. Access: Instant. AC INI-Param: 802.1xVerifyPeerCertificaterw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.7.25.4 |
acSysSerialIF OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.8 |
acSysSerialIFBaudRateEnables changes to the Serial Baud Rate for Simplified Message Desk Interface (SMDI). Range = Any value accepted. Recommended standard values: 1200, 2400, 9600, 14400, 19200, 38400, 57600, 115200. Access: Offline. AC INI-Param: SerialBaudRaterw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.8.1 |
acSysSerialIFDataChanges the serial data bit for the Simplified Message Desk Interface (SMDI). 7 = 7 Bit 8 = 8 Bit. Access: Offline. AC INI-Param: SerialDatarw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.8.2 |
acSysSerialIFParityChanges the serial parity for the Simplified Message Desk Interface (SMDI). 0 = None 1 = Odd 2 = Even. Access: Offline. AC INI-Param: SerialParityrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.8.3 |
acSysSerialIFStopChanges the serial stop for the Simplified Message Desk Interface (SMDI). 1 = 1 Bit 2 = 2 Bit. Access: Offline. AC INI-Param: SerialStoprw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.8.4 |
acSysSerialIFFlowControlChanges the serial flow control for the Simplified Message Desk Interface (SMDI). 0 = None 1 = Hardware. Access: Offline. AC INI-Param: SerialFlowControlrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.8.5 |
acVoiceStream OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.9 |
acVoiceStreamStatusEnables/disables the voice streaming for all voice source types (HTTP, NFS, Local Storage). When enabled, the module requires some system resources, such as tasks and memory allocation. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.9.1 |
acVoiceStreamUploadMethodDefines the HTTP request type for uploading the voice stream to the file server. 0 = POST 1 = PUT. Access: Offline. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.9.2 |
acVoiceStreamUploadPostUriDefines the URI used on the POST request, to upload voice data from the media server to a web server. This parameter is used only when using the HTTP POST for recording and the command is not issued by the Lib (tpncp protocol). The path needs to be set to the upload script on the web server. . Access: Offline. AC INI-Param: N/Arw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.9.3 |
acSysAMS OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.10 |
acSysAMSProfileEnable/Disable AMS Advanced IVR play functionality. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: AMSProfilerw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.10.1 |
acSysAMSApsIpAddressSets the destination UDP port to which the Heartbeat Packets are sent. Range = IP address in dotted notation xxx.xxx.xxx.xxx Default = 0.0.0.0. Access: Offline. AC INI-Param: HeartbeatDestIPrw IpAddress .1.3.6.1.4.1.5003.9.10.10.1.10.2 |
acSysAMSApsPortSets the destination UDP port to which the heartbeat packets are sent. Access: Offline. AC INI-Param: HeartbeatDestPortrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.10.3 |
acSysAMSPrimaryLanguageDefines the Primary Language for the AMS. Range = String[3] - language ISO string. Access: Instant. AC INI-Param: AMSPrimaryLanguagerw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.10.4 |
acSysAMSSecondaryLanguageDefines the Secondary Language for the AMS. Range = String[3] - language ISO string. Access: Instant. AC INI-Param: AMSSecondaryLanguagerw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.10.5 |
acSysAMSAPSProfileIndicates if the system should expect to use APS bundle (vp.dat and segments.xml files), or if the system should expect the vp.dat file only. A 1 means that an APS bundle should be used. A 0 means that the system should use vp.dat only. The default setting is 1, meaning expect APS bundle. Access: Offline. AC INI-Param: APSEnabledrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.10.6 |
acSysAMSForceRepositoryEnableIndicates that a new audio repository (consisting of VP and XML files) should always be uploaded to the board regardless of whether signals are still being played on the old repository. Access: Instant. AC INI-Param: AMSForceRepositoryUpdateEnabledrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.10.7 |
acSysNetworkFileSystem OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.11 |
acSysNFSTable SEQUENCE OF AcSysNFSEntry .1.3.6.1.4.1.5003.9.10.10.1.11.21 |
acSysNFSEntry AcSysNFSEntry .1.3.6.1.4.1.5003.9.10.10.1.11.21.1 |
acSysNFSIndexIndex Field for line. Internal parameter. AC INI-Param: NFSServers_Index Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.1 |
acSysNFSRowStatusROWSTATUS field for line. Internal parameter. AC INI-Param: N/Arw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.2 |
acSysNFSActionMangement Field for ACTIONS. Internal parameter. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.3 |
acSysNFSActionResMangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.4 |
acSysNFSHostOrIPThe domain name or IP address of the NFS server. If a domain name is provided, then a DNS server must be configured. Access: Online. AC INI-Param: NFSServers_HostOrIPrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.5 |
acSysNFSRootPathPath to the root of the exported file system. Access: Online. AC INI-Param: NFSServers_RootPathrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.6 |
acSysNFSNfsVersionNFS version to use with this remote file system, 2 or 3 (default). Access: Online. AC INI-Param: NFSServers_NfsVersionrw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.7 |
acSysNFSAuthTypeIdentifies the authentication method used with this remote file system, 0 for AUTH_NULL, 1 for AUTH_UNIX (default). Access: Online. AC INI-Param: NFSServers_AuthTyperw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.8 |
acSysNFSUIDUser ID used in authentication if using AUTH_UNIX. The default is 0. Access: Online. AC INI-Param: NFSServers_UIDrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.9 |
acSysNFSGIDGroup ID used in authentication if using AUTH_UNIX. The default is 1. Access: Online. AC INI-Param: NFSServers_GIDrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.10 |
acSysNFSVlanTypeThe VLAN, OAM(0) or Media(1), to use when accessing this remote file system. The default is to use the media VLAN. This parameters applies only if multiple IP addresses are configured on this board. Access: Online. AC INI-Param: NFSServers_VlanTyperw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.11.21.1.11 |
acSysHA OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.12 |
acSysHAGlobalIPAddressDefines the M3K global IP address to be used by the active module in HA system. (Dotted format notation. e.g., 192.10.1.255). Range = Legal IP address. Access: Offline. AC INI-Param: M3KGlobalIpAddrrwobsolete IpAddress .1.3.6.1.4.1.5003.9.10.10.1.12.1 |
acSysTransmission OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.13 |
acSysTransmissionTypeSets the PSTN Transmission type for the board: optical SONET / SDH or copper DS3. Access: Offline. AC INI-Param: PSTNTransmissionTyperw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.13.1 |
acSysTiming OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.14 |
acSysTimingModeDetermines the PSTN Timing synchonization mode of the Gateway. One of the following values: TM_External_MODE(1) -External Timing mode - use the SAT trunks Centralized Line Timing to synchronize the Gateway with one of the PSTN interfaces. TM_LineSync_MODE(2) -Distributed Line Timing mode (for the 1610 boards)- without using the SAT timing module. TM_Standalone_MODE(0) -Non-synchronized mode - each board or TPM is synchronized internally from one of the PSTN interfaces without using the SAT timing module. Access: Online. AC INI-Param: TMModerw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.14.1 |
acSysTimingValidationTimeReference validation time. Applicable for External timing and Line timing timing references. Range: 0 - 15 minutes. Resolution: 1 minute. Access: Online. AC INI-Param: TMReferenceValidationTimerw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.14.2 |
acSysTimingClockToDeriveAWhich Clock to use in sync mode. Access: Online. AC INI-Param: TMClockToDerive_Arwobsolete Enumeration .1.3.6.1.4.1.5003.9.10.10.1.14.3 |
acSysTimingClockToDeriveBWhich Clock to use in sync mode. Access: Online. AC INI-Param: TMClockToDerive_Brwobsolete Enumeration .1.3.6.1.4.1.5003.9.10.10.1.14.4 |
acSysTimingExternalIFTypeDefines the external line reference (BITS) transmission format. Access: Online. AC INI-Param: TMExternalIFTyperw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.14.5 |
acSysTimingLoopBackRef1Enables loopback state, by connecting Rx path towards Tx path. Access: Online. AC INI-Param: TMLoopBackExternalRef1rw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.14.6 |
acSysTimingLoopBackRef2Enables loopback state, by connecting Rx path towards Tx path. Access: Online. AC INI-Param: TMLoopBackExternalRef2rw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.14.7 |
acSysTimingTransmitControlEnables loopback state, by connecting Rx path towards Tx path. Access: Online. AC INI-Param: TMTransmitControlrwobsolete Enumeration .1.3.6.1.4.1.5003.9.10.10.1.14.8 |
acSysTimingE1LineBuildOutSets the transmission power between the timing module on the SAT and the E1 external reference clock (ohms). This parameter is only relevant for the Mediant 3000.This parameter is enabled when bspTimingModuleCfgTimingMode is set to TM_External_MODE(1). One of the following values: E_75_OHM_with_high_return_loss(4),E_120_OHM_with_high_return_loss(5),E_75_OHM_normal_PLUS_enable_transmit_and_receive_gapped_clock(6),E_120_OHM_normal_PLUS_enable_transmit_and_receive_gapped_clock(7),E_75_OHM_normal(0),E_120_OHM_normal(1). Access: Online. AC INI-Param: TME1LineBuildOutrwobsolete Enumeration .1.3.6.1.4.1.5003.9.10.10.1.14.9 |
acSysTimingT1LineBuildOutExternal Reference Transmit Line Build Out. Access: Online. AC INI-Param: TMT1LineBuildOutrwobsolete Enumeration .1.3.6.1.4.1.5003.9.10.10.1.14.10 |
acSysLDAP OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.1.15 |
acSysLDAPServerIpThis parameter defines the IP address in dotted format notation. e.g., 192.10.1.255 Range = Legal IP address. Access: Online. AC INI-Param: LDAPSERVERIPrw IpAddress .1.3.6.1.4.1.5003.9.10.10.1.15.1 |
acSysLDAPServerPortDefines the port number for the LDAP server. Range = Valid port number. Access: Online. AC INI-Param: LDAPSERVERPORTrw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.15.2 |
acSysLDAPServerMaxRespondTimeDefines the period of time the module will wait for LDAP server response (seconds). Access: Online. AC INI-Param: LDAPSERVERMAXRESPONDTIMErw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.1.15.3 |
acSysLDAPServerDomainNameThis parameter is used to indicate the name of LDAP server. Access: Online. AC INI-Param: LDAPSERVERDOMAINNAMErw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.15.4 |
acSysLDAPSearchDNThis parameter is used to indicate the search DN for LDAP search request. Access: Online. AC INI-Param: LDAPSEARCHDNrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.15.5 |
acSysLDAPPasswordThis parameter is used to indicate the user password of LDAP server. Access: Online. AC INI-Param: LDAPPASSWORDrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.15.6 |
acSysLDAPBindDNThis parameter is used to indicate the of LDAP server bind DN. Access: Online. AC INI-Param: LDAPBINDDNrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.1.15.7 |
acSysLDAPServiceEnableUsed to either enable or disable LDAP service. 0- disable (default) 1 - enable. Access: Offline. AC INI-Param: LDAPSERVICEENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.10.1.15.8 |
acSystemStatus OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.2 |
acSysType OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.2.1 |
acSysTypeProductThe type of the Board. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.1.1 |
acSysTypeDSPDsp Type. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.1.2 |
acSysTypeModuleAC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.1.3 |
acSysTypeCPUSpeedCPU Speed. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.1.4 |
acSysVersion OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.2.2 |
acSysVersionSoftwareTrunkPack Software Version. AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.2.2.1 |
acSysVersionFlashFlash [BootLoader] Version. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.2.2 |
acSysVersionIniFileIni file version. AC INI-Param: INIFileVersionro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.2.3 |
acSysVersionSoftwareDateTrunkPack Software Date. AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.2.2.4 |
acSysId OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.2.3 |
acSysIdNameThe name fo the board. AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.2.3.1 |
acSysIdSerialNumberserial number of board. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.3.2 |
acSysIdSlotNumberSlot number. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.3.3 |
acSysIdFirstSerialNumberThe device's first serial number. When the device is part of a dual module board this is the first module's serial number. When the device is the first module in a dual module or the device is not in a dual module board, the values for asSysIdSerialNumber and acSysIdFirstSerialNumber are the same. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.3.4 |
acSysCount OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.2.4 |
acSysCountDSPsDSP Count. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.4.1 |
acSysCountChannelsChannel Count. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.4.2 |
acSysCountTrunksTrunks Count. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.4.3 |
acSysState OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.2.5 |
acSysStateTemperatureTemperature of the board in degrees Celsius, should not go higher then 60!. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.5.1 |
acSysStateOperationalThe operational state of the gateway. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.5.2 |
acSysStateHAupdateInProgressIndicates during update process, which done between active and redundant boards. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.5.3 |
acSysStateGWSeverityThe highest alarm severity on the device. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.5.4 |
acSysStateIsPstnManagementEnableIs Pstn Management Enable 0 - Disable 1 - Enable. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.5.5 |
acSysNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.2.6 |
acSysEthernet OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.2.6.1 |
acSysEthernetFirstPortDuplexModefull-duplex or half-duplex connection. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.6.1.1 |
acSysEthernetFirstPortSpeedAC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.6.1.2 |
acSysEthernetSecondPortDuplexModefull-duplex or half-duplex connection. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.6.1.3 |
acSysEthernetSecondPortSpeedAC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.6.1.4 |
acSysEthernetActivePortNumberDisplay the current active ethernet port number. 0 - not relevant. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.6.1.5 |
acSysEthernetStatusTableEthernet relevant information SEQUENCE OF AcSysEthernetStatusEntry .1.3.6.1.4.1.5003.9.10.10.2.6.1.21 |
acSysEthernetStatusEntry AcSysEthernetStatusEntry .1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1 |
acSysEthernetStatusIndexThe row's index. On 8410 Systems: Index 1 - related to GBE port no.1 in the TER (Media). Index 2 - related to GBE port no.2 in the TER (Media). Index 3 - related to port 1A in PEM #1 (Control). Index 4 - related to port 1B in PEM #2 (Control). Index 5 - related to port 2A in PEM #1 (OAM). Index 6 - related to port 2B in PEM #2 (OAM). On MSBG only: 0 - WAN interface. 1-12 LAN interfaces. AC INI-Param: N/A Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.1 |
acSysEthernetStatusPortDuplexModefull-duplex or half-duplex connection. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.2 |
acSysEthernetStatusPortSpeedport speed. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.3 |
acSysEthernetStatusActivePortNumberStatus of ethernet port - active or not active. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.4 |
acSysEthernetStatusPortStatePort State. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.5 |
acSysEthernetStatusPowerOverEthernetPower over Ethernet interface status. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.6.1.21.1.6 |
acSysNAT OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.2.6.2 |
acSysNATTypeIdentified NAT type. -1 - STUN client is disabled 0 - None 1 - FullCone 2 - Restricted 3 - PortRestricted 4 - Symmetric 5 - SymmetricFireWall 6 - Blocked 7 - Unknown 10 - NAT identification in progress. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.6.2.1 |
acSysWebStat OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.2.6.3 |
acSysWebStatPasswordControlViaSNMPIf set to 1 it will allow changing the web interface username and password via SNMP. AC INI-Param: WEBPasswordControlViaSNMPro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.6.3.1 |
acSysIPStatus OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.2.6.4 |
acSysInterfaceStatusTable SEQUENCE OF AcSysInterfaceStatusEntry .1.3.6.1.4.1.5003.9.10.10.2.6.4.21 |
acSysInterfaceStatusEntry AcSysInterfaceStatusEntry .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1 |
acSysInterfaceStatusEntryIndexRelated Interface index in the interface configuration table (in case the table is empty - meaning there is only single IP the index will appear with 0). AC INI-Param: N/A Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.1 |
acSysInterfaceStatusTypeIndex1 - IP Address. 2 - IPv6 Link-Local Address. AC INI-Param: N/A Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.2 |
acSysInterfaceStatusApplicationTypesThe type assigned to the interface. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.3 |
acSysInterfaceStatusModeInterface configuration mode. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.4 |
acSysInterfaceStatusIPAddressIP Address (can be either IPv4 or IPv6) for this interface. AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.5 |
acSysInterfaceStatusPrefixLengthThe number of '1' bits in this interface's netmask. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.6 |
acSysInterfaceStatusGatewayDefault Gateway. AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.7 |
acSysInterfaceStatusVlanIDVLAN ID of this interface. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.8 |
acSysInterfaceStatusName16 character string of this interface's name. AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.2.6.4.21.1.9 |
acSysTime OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.2.7 |
acSysTimeUpTime (in Seconds) that the board is alive. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.7.1 |
acSysVoicePrompt OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.2.8 |
acSysVoicePromptTotalMemorySizeGet the total voice prompt memory size. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.8.1 |
acSysVoicePromptMaxFreeMemorySizeGet the maximu voice prompt memory free size. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.2.8.2 |
acSysRepositoryAMS OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.2.9 |
acSysRepositoryAMSIsReadyForUpdateVerify if the old repository is free or there are signals still using it. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.9.1 |
acSysHAStatus OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.2.10 |
acSysHAStatusReadyDefines whether the M3K system supports HA or not. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.10.1 |
acSysLDAPStatus OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.2.11 |
acSysLDAPStatusServerModeLDAP server status. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.2.11.1 |
acSystemAction OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.3 |
acSysAction OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.3.1 |
acSysActionSet OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.3.1.1 |
acSysActionSetResetremote Reset. To remote reset the board, set the value of this object to 1. Note: Before Reset, The current boardConfiguration parameters will be burned to the board. Access: Instant. AC INI-Param: N/Arw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.3.1.1.1 |
acSysActionSetResetControlDetermines the remote reset action. 1 - burn staged load image, if any, and config to flash, perform a reset, and load from flash 2 - perform a reset, and load from flash (staged load image, if any, and config is not burned to flash) 3 - perform a reset, and load from bootp/tftp (staged load image, if any, and config burn is not needed) * - an error is returned for any other value Note: The staged load image is an image of a cmp file that was previously loaded to a area in RAM via an HTTP upload. Access: Instant. AC INI-Param: RemoteResetControlrw Enumeration .1.3.6.1.4.1.5003.9.10.10.3.1.1.2 |
acSysActionSetDefaultsTo set the board to default values, set the value of this object to 1. Access: Instant. AC INI-Param: N/Arw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.3.1.1.3 |
acSysActionSetSaveConfigTo save all current configuration in the board onto the flash, set the value of this object to 1. NOTE: Do NOT save the configuration while voice is running - this will cause a delay. Access: Instant. AC INI-Param: N/Arw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.3.1.1.4 |
acSysActionSetAutoUpdateTo update the system configuration according to the provisioned IniFileUrl, set the value of this object to 1. Access: Instant. AC INI-Param: N/Arw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.3.1.1.5 |
acSysActionSetGetTimeFromNTPServerInitiates an immediate NTP time fetch. Access: Instant. AC INI-Param: N/Arw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.3.1.1.6 |
acSysActionSetSwUpgradeDefines the type of SW upgrade in M3K HA system (Hitless or system reset). Access: Instant. AC INI-Param: M3KHASwUpgradeModerw Enumeration .1.3.6.1.4.1.5003.9.10.10.3.1.1.7 |
acSysActionSetOnLineChangesApplyApplies the board on line changed params. Access: Instant. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.3.1.1.8 |
acSysActionSetIPSecTLSUpgradeTo update the IPSec TLS configuration according to the provisioned TLS fils URL set the value of this object to 1. Access: Instant. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.3.1.1.9 |
acSysActionSetGWAppTLSUpgradeTo update the GWApp TLS configuration according to the provisioned TLS fils URL set the value of this object to 1. Access: Instant. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.3.1.1.10 |
acSysActionSetConvertNetworkIFsConfigurationSET to 1 will convert network configuration to advance multiple network Interfaces mode. Access: Instant. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.3.1.1.11 |
acSysActionSetActionIdThis field is for management use and is aimed to distinguish different managers managing a single device. Access: Instant. AC INI-Param: N/Arw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.3.1.1.12 |
acSysActionSetAutoUpdateActionResultIndicates the autoupdates operation status in the form of a string: 'acSysActionId ; <status> ; <reson>'. The status field can be: 'success'\'failure'\'inProgress'. The infromation is valid only when downloading one file at a time. Note - a second way of following the success of the file downloading is to see the files name being updated in the acSysFile subtree. AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.3.1.1.13 |
acSysActionAdmin OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.3.1.2 |
acSysActionAdminStateDetermines the gateway's operational state. 0 - locked: Shutdown the GW In the time frame set by acgwAdminStateLockControl. 1 - shuttingDown: (read only) Graceful Shutdown is being carried out. 2 - unlocked: GW is in service. Access: Online. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.3.1.2.1 |
acSysActionAdminStateLockTimeoutDefines the time remaining (in seconds) for the shutdown to complete. 0 = immediate shutdown -1 = waits until all calls drop (infinite) >0 = the number of seconds to wait. Access: Offline. AC INI-Param: N/Arw Integer32 (-1..32768) .1.3.6.1.4.1.5003.9.10.10.3.1.2.2 |
acSysUpload OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.3.1.3 |
acSysUploadActionTypeAction to be carried out. Setting this field triggers the action. File upload supported for iniFile(1), v5PortFile(16) and DataConfigurationFile(17) only access is instant. File removal supported for all other then iniFile(1), v5PortFile(16) and DataConfigurationFile(17), (v5PortFile removal is done via acV5PortActionType) access is offline. Access: Instant. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.3.1.3.1 |
acSysUploadFileTypeThe file type to be uploaded. Note - for file types with more then one instance (like CAS files) use the acSysActionFileInstance to specify which instance you want to upload. Access: Instant. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.3.1.3.2 |
acSysUploadFileNumberFile number for file types that have more then one file instance, such as CAS, VideoFont etc'. Access: Instant. AC INI-Param: N/Arw Integer32 (-1..7) .1.3.6.1.4.1.5003.9.10.10.3.1.3.3 |
acSysUploadFileURIURI indicating file location to be downloaded to. Access: Instant. AC INI-Param: N/Arw SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.3.1.3.4 |
acSysUploadActionIDThis field is for management use and is aimed to distinguish different managers managing a single device. Access: Instant. AC INI-Param: N/Arw Unsigned32 .1.3.6.1.4.1.5003.9.10.10.3.1.3.5 |
acSysUploadActionResultAction result. Includes action status (success, failure or inProgress), action ID. AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.3.1.3.6 |
acSystemChassis OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.4 |
acSystemChassisDryContactsOutStatusIndicates current state of the alarm dry contacts - out signals (3 signals). This is a bit-map of possible conditions. AC INI-Param: N/Aro Bits .1.3.6.1.4.1.5003.9.10.10.4.1 |
acSystemChassisDryContactsInStatusIndicates current state of the alarm dry contacts - in signals (1 signals). The role of each input signal should be according to the customer's requirements. This is a bit-map of possible conditions. AC INI-Param: N/Aro Bits .1.3.6.1.4.1.5003.9.10.10.4.2 |
acSystemChassisLastChangedThe value of sysUpTime at the time a row is modified in any of the acSystemChassis subtree's objects. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.4.3 |
acSysModuleTable SEQUENCE OF AcSysModuleEntry .1.3.6.1.4.1.5003.9.10.10.4.21 |
acSysModuleEntry AcSysModuleEntry .1.3.6.1.4.1.5003.9.10.10.4.21.1 |
acSysModuleIndexThe Module number in the system. AC INI-Param: N/A Unsigned32 .1.3.6.1.4.1.5003.9.10.10.4.21.1.1 |
acSysModuleGeographicalPositionThe slot number in the chassis. 1 being the bottom slot and so on. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.4.21.1.2 |
acSysModuleTypeThe module's type. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.21.1.3 |
acSysModulePresenceIs the module present or missing. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.21.1.4 |
acSysModuleLicenseKeyListList of active features as enabled by the license key. SA modules return NULL. AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.4.21.1.5 |
acSysModuleSerialNumberThe module's serial number. For 6310 the serial number is the decimal form of the last 5 characters in the MAC Address. SA modules return 0. When the modules in the table are unavailable for audit (no HA) (-1) is returned. AC INI-Param: N/Aro Integer32 (-1..2147483647) .1.3.6.1.4.1.5003.9.10.10.4.21.1.6 |
acSysModuleSWVersionThe version of the SW being run in the module placed . SA Modules return NULL. AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.4.21.1.7 |
acSysModuleOperationalStateThe operational state of the module. Determined internally by the system. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.21.1.8 |
acSysModuleHAStatusModules status with in the system. Designed to define the HA state. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.21.1.9 |
acSysModuleLEDsBit Field for the LEDs on the front of the module. LSB in each nibble (half Byte) is 0 - constant, 1 - blinking. 3 MSB are the color - 0 - none 1- Green 2 - Red 3 - Yellow 4 - Orange 5 - Blue 7 - Gray (unknown). AC INI-Param: N/Aro OCTET STRING .1.3.6.1.4.1.5003.9.10.10.4.21.1.10 |
acSysModuleTemperatureTemperature of the board in degrees Celsius. SA Modules return 0. AC INI-Param: N/Aro Integer32 (-1..100) .1.3.6.1.4.1.5003.9.10.10.4.21.1.11 |
acSysModuleActionsActions to be performed by the module. Access: Instant. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.4.21.1.12 |
acSysModuleFRUactionField Replace Unit actions Relevant to IF-Module only. Access: Instant. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.10.4.21.1.13 |
acSysModuleFRUstatusField Replace Unit module's status. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.21.1.14 |
acSysModuleNumOfPortsThe number of physical interfaces in a module, analog or digital. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.4.21.1.15 |
acSysModuleFirstPortNumThe logical number as seen in the general trunk/analog-channel table of the first port in the module in question. Since analog and digital ports can be operational at once, analog and digital ports may have same logical number. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.4.21.1.16 |
acSysFanTrayTable SEQUENCE OF AcSysFanTrayEntry .1.3.6.1.4.1.5003.9.10.10.4.22 |
acSysFanTrayEntry AcSysFanTrayEntry .1.3.6.1.4.1.5003.9.10.10.4.22.1 |
acSysFanTrayIndexFan-Tray's index in the system. AC INI-Param: N/A Unsigned32 .1.3.6.1.4.1.5003.9.10.10.4.22.1.1 |
acSysFanTrayGeographicalPositionThe slot number in the chassis. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.4.22.1.2 |
acSysFanTrayExistenceIs the Fan-Tray present or missing. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.22.1.3 |
acSysFanTrayTypeThe type of the Fan-Tray . AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.4.22.1.4 |
acSysFanTrayLEDsThis object built as a bit-field which represents the Fan-Tray's LEDs status. The first four bites represent the System's LED status and the last four bites represent the Shelf-LED's status. AC INI-Param: N/Aro OCTET STRING .1.3.6.1.4.1.5003.9.10.10.4.22.1.5 |
acSysFanTraySeverityThe Severity of the whole fan tray according to the current active alarm in the alarm table: Critical, Major or cleared. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.22.1.6 |
acSysFanTrayFansConfiguredSpeedThe fan's configured speed in Tach units (RPM/120). Each Byte represents a fan. AC INI-Param: N/Aro OCTET STRING .1.3.6.1.4.1.5003.9.10.10.4.22.1.7 |
acSysFanTrayFansCurrentSpeedThe fan's mesured speed in Tach units (RPM/120). Each Byte represents a fan. AC INI-Param: N/Aro OCTET STRING .1.3.6.1.4.1.5003.9.10.10.4.22.1.8 |
acSysFanTrayFansStatusA bit field which display the working status of each fan in the Fan-Tray. 0 - Working 1 - Faulty. AC INI-Param: N/Aro OCTET STRING .1.3.6.1.4.1.5003.9.10.10.4.22.1.9 |
acSysPowerSupplyTable SEQUENCE OF AcSysPowerSupplyEntry .1.3.6.1.4.1.5003.9.10.10.4.23 |
acSysPowerSupplyEntry AcSysPowerSupplyEntry .1.3.6.1.4.1.5003.9.10.10.4.23.1 |
acSysPowerSupplyIndexPower-Supply's index in the system. AC INI-Param: N/A Unsigned32 .1.3.6.1.4.1.5003.9.10.10.4.23.1.1 |
acSysPowerSupplyGeographicalPositionThe slot number in the chassis. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.4.23.1.2 |
acSysPowerSupplyExistenceIs the Power-Supply present or missing. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.23.1.3 |
acSysPowerSupplyHwversionPS's HW version. AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.4.23.1.4 |
acSysPowerSupplyLEDsA bit-field representation of the Power-Supply LEDs' status. The first four bites represent the Power-Supply LED's status and the last four bites represent the Fault LED's status. AC INI-Param: N/Aro OCTET STRING .1.3.6.1.4.1.5003.9.10.10.4.23.1.5 |
acSysPowerSupplySeverityThe Severity of the power-supply according to the current active alarm in the alarm table. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.23.1.6 |
acSysPEMTable SEQUENCE OF AcSysPEMEntry .1.3.6.1.4.1.5003.9.10.10.4.24 |
acSysPEMEntry AcSysPEMEntry .1.3.6.1.4.1.5003.9.10.10.4.24.1 |
acSysPEMIndexPEM-Module's index in the system. AC INI-Param: N/A Unsigned32 .1.3.6.1.4.1.5003.9.10.10.4.24.1.1 |
acSysPEMGeographicalPositionThe slot number in the chassis. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.4.24.1.2 |
acSysPEMExistenceIs the PEM-Module present or missing. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.24.1.3 |
acSysPEMTypePEM's Type. AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.4.24.1.4 |
acSysPEMElectricWireConnectionPresent the status of the electricity connector located on the PEM card. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.24.1.5 |
acSysSATModule OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.4.25 |
acSysSATTable SEQUENCE OF AcSysSATEntry .1.3.6.1.4.1.5003.9.10.10.4.25.21 |
acSysSATEntry AcSysSATEntry .1.3.6.1.4.1.5003.9.10.10.4.25.21.1 |
acSysSATSatIndexSAT-Module's index in the system. AC INI-Param: N/A Unsigned32 .1.3.6.1.4.1.5003.9.10.10.4.25.21.1.1 |
acSysSATGeographicalPositionThe slot number in the chassis. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.10.4.25.21.1.2 |
acSysSATTypeSAT's Type. AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.10.4.25.21.1.3 |
acSysSATInitInformationSat's Init Information. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.25.21.1.4 |
acSysSATTimingUnitExistenceIs the Timig Unit present or missing. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.25.21.1.5 |
acSysSATTimingRefSelectionSAT's Timing Reference Selection. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.25.21.1.6 |
acSysSATFramersTable SEQUENCE OF AcSysSATFramersEntry .1.3.6.1.4.1.5003.9.10.10.4.25.22 |
acSysSATFramersEntry AcSysSATFramersEntry .1.3.6.1.4.1.5003.9.10.10.4.25.22.1 |
acSysSATFramersSatIndexSAT-Module's index in the system. AC INI-Param: N/A Unsigned32 .1.3.6.1.4.1.5003.9.10.10.4.25.22.1.1 |
acSysSATFramersFramerIndexFramer's Index. AC INI-Param: N/A Unsigned32 .1.3.6.1.4.1.5003.9.10.10.4.25.22.1.2 |
acSysSATFramersFramerInterfaceStatusFramer Interface Status. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.25.22.1.3 |
acSysSATFramersFramerLoopBackRefFrame rLoop Back Reference. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.25.22.1.4 |
acSysSATFramersFramerInterfaceTypeFramer Interface Type. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.25.22.1.5 |
acSysSATFramersFramerTransmitControlFramer Transmit Control. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.25.22.1.6 |
acSysSATFramersRxStatusProvides the alarm status of the clock interface. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.25.22.1.7 |
acSysSATFramersIsUsedAsPLLClockIs Used As PLL Clock indication. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.25.22.1.8 |
acSysTimingModule OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.10.4.26 |
acSysPLLStatusTable SEQUENCE OF AcSysPLLStatusEntry .1.3.6.1.4.1.5003.9.10.10.4.26.21 |
acSysPLLStatusEntry AcSysPLLStatusEntry .1.3.6.1.4.1.5003.9.10.10.4.26.21.1 |
acSysPLLStatusIndexTable's Index. AC INI-Param: N/A Unsigned32 .1.3.6.1.4.1.5003.9.10.10.4.26.21.1.1 |
acSysPLLStatusOperatingModePLL's Current Operating Mode. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.10.4.26.21.1.2 |