AX7800S
AI MIB Summary
Standard SNMP MIB module defining data structures for AX7800S.
1617
Objects
Active
Status
12
Dependencies
Imported Objects
Objects
1617 total| Object Name |
|---|
alaxala OBJECT IDENTIFIER .1.3.6.1.4.1.21839 |
OSPF-MIB Unknown .1.3.6.1.4.1.21839 |
alaxalaProductId OBJECT IDENTIFIER .1.3.6.1.4.1.21839.1 |
axSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.21839.1.2 |
ax7800s OBJECT IDENTIFIER .1.3.6.1.4.1.21839.1.2.2 |
ax7800sStandbySystemUpTrapStandby system is restarted. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.2.0.2 |
ax7800sStandbySystemDownTrapStandby system is failed. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.2.0.3 |
ax7800sTemperatureTrapA ax7800sTemperatureTrap is sent if the
temperature measured at a given testpoint is outside
the normal range for the testpoint (i.e. is at the warning,
critical, or shutdown stage). TRAP-TYPE .1.3.6.1.4.1.21839.1.2.2.0.4 |
ax7800sGsrpStateTransitionTrapChanges of the VLAN group state of GSRP TRAP-TYPE .1.3.6.1.4.1.21839.1.2.2.0.6 |
ax7800sAirFanStopTrapThis trap indicates a fan failure. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.2.0.8 |
ax7800sPowerSupplyFailureTrapThis trap indicates one ( or more ) of power supplies failure. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.2.0.9 |
ax7800sLoginSuccessTrapThis trap indicates success of user log in. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.2.0.10 |
ax7800sLoginFailureTrapThis trap indicates failure of user log in. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.2.0.11 |
ax7800sLogoutTrapThis trap indicates success of following log out.
'logout' command, 'exit' command, 'quit' command. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.2.0.12 |
ax7800sMemoryUsageTrapThis indicates available memory is fewer than lower limit. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.2.0.13 |
ax7800sFrameErrorReceiveTrapThis indicates frame receive error. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.2.0.18 |
ax7800sFrameErrorSendTrapThis indicates frame send error. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.2.0.19 |
ax7800sEfmoamUdldPortInactivateTrapEfmoam udld port inactivate trap. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.2.0.29 |
ax7800sEfmoamLoopDetectPortInactivateTrapEfmoam loop detect port inactivate trap. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.2.0.30 |
ax5400s OBJECT IDENTIFIER .1.3.6.1.4.1.21839.1.2.3 |
IMPORTSSystem message is displayed. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.3.0.1 |
ax5400sStandbySystemUpTrapStandby system is restarted. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.3.0.2 |
ax5400sStandbySystemDownTrapStandby system is failed. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.3.0.3 |
ax5400sTemperatureTrapA ax5400sTemperatureTrap is sent if the
temperature measured at a given testpoint is outside
the normal range for the testpoint (i.e. is at the warning,
critical, or shutdown stage). TRAP-TYPE .1.3.6.1.4.1.21839.1.2.3.0.4 |
ax5400sGsrpStateTransitionTrapChanges of the VLAN group state of GSRP TRAP-TYPE .1.3.6.1.4.1.21839.1.2.3.0.6 |
ax5400sAirFanStopTrapThis trap indicates a fan failure. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.3.0.8 |
ax5400sPowerSupplyFailureTrapThis trap indicates one ( or more ) of power supplies fail ure. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.3.0.9 |
ax5400sLoginSuccessTrapThis trap indicates success of user log in. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.3.0.10 |
ax5400sLoginFailureTrapThis trap indicates failure of user log in. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.3.0.11 |
ax5400sLogoutTrapThis trap indicates success of following log out.
'logout' command, 'exit' command, 'quit' command. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.3.0.12 |
ax5400sMemoryUsageTrapThis indicates available memory is fewer than lower limit. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.3.0.13 |
ax5400sFrameErrorReceiveTrapThis indicates frame receive error. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.3.0.18 |
ax5400sFrameErrorSendTrapThis indicates frame send error. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.3.0.19 |
ax5400sEfmoamUdldPortInactivateTrapEfmoam udld port inactivate trap. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.3.0.29 |
ax5400sEfmoamLoopDetectPortInactivateTrapEfmoam loop detect port inactivate trap. TRAP-TYPE .1.3.6.1.4.1.21839.1.2.3.0.30 |
alaxalaMib OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2 |
axsEx OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2 |
axsMib OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1 |
axsStats OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.1 |
axsPhysStats OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.1.1 |
axsPhysStatsTableA table containing statistics for physical and time slots layer
interface. SEQUENCE OF AxsPhysStatsTableEntry .1.3.6.1.4.1.21839.2.2.1.1.1.1 |
axsPhysStatsEntryAn entry containing the physical and time slots layer statistics
for a particular interface. AxsPhysStatsTableEntry .1.3.6.1.4.1.21839.2.2.1.1.1.1.1 |
axsPhysStatsIfIndexThe value of this object identifies the physical layer interface
or the time slot layer interface for WAN. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.1.1.1.1 |
axsPhysStatsIfDescrA textual string containing information about the interface.
Same as ifDescr (MIB II).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.1.1.1.1.2 |
axsPhysStatsIfTypeThe hardware type of physical interfaces.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.1.1.1.1.3 |
axsPhysStatsInFCSsNumber of FCS error frames that received.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.1.1.1.4 |
axsPhysStatsInAbortsNumber of abort frames that received.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.1.1.1.5 |
axsPhysStatsOverrunThe number of times that overrun error occurred on receiving time.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.1.1.1.6 |
axsPhysStatsUnderrunNumber of that a transmission underrun errors occurred.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.1.1.1.7 |
axsPhysStatsInOddbitsNumber of odd bit frames that received.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.1.1.1.8 |
axsPhysStatsInShortfrmsNumber of short frames that received.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.1.1.1.9 |
axsPhysStatsSendTimeoutNumber of times that a transmission timeout ocurred.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.1.1.1.10 |
axsPhysStatsOutAbortsThe number of transmission of abort frames.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.1.1.1.11 |
axsPhysStatsInLongfrmsNumber of long frames that received.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.1.1.1.12 |
axsSonetStats OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.1.3 |
axsSonetSectionStatsTableA table containing SONET section statistics for sonet interfaces. SEQUENCE OF AxsSonetSectionStatsTableEntry .1.3.6.1.4.1.21839.2.2.1.1.3.1 |
axsSonetSectionStatsEntryAn entry containing SONET section statistics for sonet interfaces. AxsSonetSectionStatsTableEntry .1.3.6.1.4.1.21839.2.2.1.1.3.1.1 |
axsSonetSectionStatsIfIndexThe value of this object identifies for a SONET interface.
This object has the same value as the ifIndex object. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.3.1.1.1 |
axsSonetSectionStatsLOSNumber of times LOS(Loss Of Signal).ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.1.1.2 |
axsSonetSectionStatsLOFNumber of times LOF(Loss Of Frame).An LOF defect is declared
when OOF(Out of Frame) defect persists for a period of 3 milliseconds.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.1.1.3 |
axsSonetSectionStatsOOFThis object count when out of synchronous.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.1.1.4 |
axsSonetSectionStatsBIP8Number of times S-BIP8(Bit Interleaved Parity 8) Error.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.1.1.5 |
axsSonetSectionStatsB2EBERNumber of times B2EBER Error.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.1.1.6 |
axsSonetSectionStatsB2SDNumber of times B2SD Error.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.1.1.7 |
axsSonetLineStatsTableA table containing line statistics for sonet interfaces. SEQUENCE OF AxsSonetLineStatsTableEntry .1.3.6.1.4.1.21839.2.2.1.1.3.2 |
axsSonetLineStatsEntryAn entry containing line statistics for sonet interfaces. AxsSonetLineStatsTableEntry .1.3.6.1.4.1.21839.2.2.1.1.3.2.1 |
axsSonetLineStatsIfIndexThe value of this object identifies for a sonet interface.
This object has the same value as the ifIndex object. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.3.2.1.1 |
axsSonetLineStatsAISNumber of Line L-AIS(Alarm Indication Signal) that received
at sonet interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.2.1.2 |
axsSonetLineStatsRDINumber of L-RDI(Remote Defect Indication) errors that received
on the sonet interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.2.1.3 |
axsSonetLineStatsBIP24Number of L-BIP24(Bit Interleaved Parity 24) errors on the sonet
interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.2.1.4 |
axsSonetLineStatsFEBENumber of L-FEBE(Line Far End Block Error) that received on the sonet
interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.2.1.5 |
axsSonetLineStatsBIP384Number of L-BIP384(Bit Interleaved Parity 384) errors on the sonet
interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.2.1.6 |
axsSonetLineStatsBIP1536Number of L-BIP1536(Bit Interleaved Parity 1536) errors on the sonet
interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.2.1.7 |
axsSonetLineStatsREINumber of L-REI(Line-path Remote Error Indication)that
received on the sonet interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.2.1.8 |
axsSonetPathStatsTableA table containing Path statistics for SONET interface. SEQUENCE OF AxsSonetPathStatsTableEntry .1.3.6.1.4.1.21839.2.2.1.1.3.3 |
axsSonetPathStatsEntryAn entry containing Path statistics for SONET interface. AxsSonetPathStatsTableEntry .1.3.6.1.4.1.21839.2.2.1.1.3.3.1 |
axsSonetPathStatsIfIndexThe IfIndex value of interface that use SONET. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.3.3.1.1 |
axsSonetPathStatsLOPNumber of LOP(Loss Of Pointer) errors that received on the sonet
interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.3.1.2 |
axsSonetPathStatsAISNumber of P-AIS(Alarm Indication Signal) that received on the sonet
interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.3.1.3 |
axsSonetPathStatsRDINumber of P-RDI(Path Remote Defect Indication) that received
on the sonet interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.3.1.4 |
axsSonetPathStatsBIP8Number of P-BIP8(Bit Interleaved Parity 8) errors that received
on the sonet interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.3.1.5 |
axsSonetPathStatsFEBENumber of P-FEBE(Far End Block Error) errors that received
on the sonet interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.3.1.6 |
axsSonetPathStatsREINumber of P-REI(Path-Remote Error Indication)
errors that received on the sonet interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.3.1.7 |
axsSonetRDIPathStatsAISLOPNumber of P-AIS/P-LOP(Remote Defect Indication Path-Alarm
Indication Signal/Path-Loss Of Pointer) that received
on the sonet interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.3.1.8 |
axsSonetRDIPathStatsUNEQNumber of P-UNEQ(Remote Defect Indication Path-UNEQuipment)
errors that received on the sonet interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.3.1.9 |
axsSonetRDIPathStatsPLMNumber of P-PLM(Remote Defect Indication
Path-Payload Label Mismatch) that received
on the sonet interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.3.1.10 |
axsSonetPathStatsUNEQNumber of P-UNEQ(Path-UNEQuipment) errors
that received on the sonet interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.3.1.11 |
axsSonetPathStatsPLMNumber of P-PLM(Remote Defect Indication
Path-Payload Label Mismatch) errors that
received on the sonet interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.3.3.1.12 |
axsIfStats OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.1.4 |
axsIfStatsTableA table containing extension statistics for more than 100,000,000
bps interface. SEQUENCE OF AxsIfStatsTableEntry .1.3.6.1.4.1.21839.2.2.1.1.4.1 |
axsIfStatsEntryAn entry containing extension statistics for interface. AxsIfStatsTableEntry .1.3.6.1.4.1.21839.2.2.1.1.4.1.1 |
axsIfStatsIndexThis object value is same as Ifindex which interface index
of a system. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.4.1.1.1 |
axsIfStatsNameInterfaces name. Same as ifDescr.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.1.4.1.1.2 |
axsIfStatsInMegaOctetsNumber of octets that received on the interface. This value is
displayed in mega-octets(M). Value of 0 through 999,999 are rounded
down.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.4.1.1.3 |
axsIfStatsInUcastMegaPktsNumber of subnetwork-unicast packets that received on the interface.
This value is displayed in mega-packets(M).Value of 0 through 999,999
are rounded down.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.4.1.1.4 |
axsIfStatsInMulticastMegaPktsNumber of multicast mega-packets that received on the interface.
this value is displayed in mega-packets(M).Value of 0 through 999,999
are rounded down.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.4.1.1.5 |
axsIfStatsInBroadcastMegaPktsThe number of non-unicast packets delivered to a higher-layer
protocol. The value is displayed in mega-packets (M). Value of 0
through 999,999 are rounded down.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.4.1.1.6 |
axsIfStatsOutMegaOctetsThe total number of octets transmitted out of the interface.
The value is displayed in mega-octets(M). Value of 0 through 999,999
are rounded down.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.4.1.1.7 |
axsIfStatsOutUcastMegaPktsThe total number of packets that higher-level protocols requested
be transmitted to a subnetwork-unicast address.The value is displayed
in mega packets(M). Value of 0 through 999,999 are rounded down.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.4.1.1.8 |
axsIfStatsOutMulticastMegaPktsNumber of multicast packets that transmitted on the interface.
This value is displayed in mega-packets(M). Value of 0 through
999,999 are rounded down.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.4.1.1.9 |
axsIfStatsOutBroadcastMegaPktsNumber of broadcast packets that transmitted on the interface.
This value is displayed in mega-packets(M). Value of 0 through
999,999 are rounded down.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.4.1.1.10 |
axsIfStatsHighSpeedA circuit speed.This value is displayed in mega-bps[Mbps].
Round off the 1,000,000bps.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.4.1.1.11 |
axsQoS OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.1.6 |
axsEtherTxQoS OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.1.6.1 |
axsEtherTxQoSStatsTableA collection of QoS statistics kept for a particular
Ethernet interface. SEQUENCE OF AxsEtherTxQoSStatsEntry .1.3.6.1.4.1.21839.2.2.1.1.6.1.1 |
axsEtherTxQoSStatsEntryAn entry containing QoS statistics for a particular
Ethernet interface. AxsEtherTxQoSStatsEntry .1.3.6.1.4.1.21839.2.2.1.1.6.1.1.1 |
axsEtherTxQoSStatsIndexIdentified by a particular value of this
index is same value of ifIndex.Its value ranges
between 1 and the value of ifNumber. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.1.1.1.1 |
axsEtherTxQoSStatsMaxQnumMax length of queue for an ethernet interface.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.1.1.1.2 |
axsEtherTxQoSStatsLimitQlenThe limit length of outband queue for an ethernet interface.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.1.1.1.3 |
axsEtherTxQoSStatsTotalOutFramesThe total number of packets transmitted out of the
interface.ro Counter .1.3.6.1.4.1.21839.2.2.1.1.6.1.1.1.4 |
axsEtherTxQoSStatsTotalOutBytesHighThe total number of octets transmitted out of the
interface.(Higher 4 bytes)ro Counter .1.3.6.1.4.1.21839.2.2.1.1.6.1.1.1.5 |
axsEtherTxQoSStatsTotalOutBytesLowThe total number of octets transmitted out of the
interface.(Lower 4 bytes)ro Counter .1.3.6.1.4.1.21839.2.2.1.1.6.1.1.1.6 |
axsEtherTxQoSStatsTotalDiscardFramesThe number of outbound packets which were chosen
to be discarded .ro Counter .1.3.6.1.4.1.21839.2.2.1.1.6.1.1.1.7 |
axsEtherTxQoSStatsQueueTableA collection of priority queue statistics. SEQUENCE OF AxsEtherTxQoSStatsQueueEntry .1.3.6.1.4.1.21839.2.2.1.1.6.1.2 |
axsEtherTxQoSStatsQueueEntryA entry of priority queue statistics. AxsEtherTxQoSStatsQueueEntry .1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1 |
axsEtherTxQoSStatsQueueIndexIdentified by a particular value of this
index is same value of ifIndex.Its value ranges
between 1 and the value of ifNumber. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1.1 |
axsEtherTxQoSStatsQueueQueIndexAn index that uniquely identifies the particular
queue.Its value ranges between 1 and the value of
axsEtherTxQoSStatsMaxQnum. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1.2 |
axsEtherTxQoSStatsQueueQlenA length of outbound priority queue for a interface.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1.3 |
axsEtherTxQoSStatsQueueMaxQlenMax length of outband priority queue for a interface since
system was up.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1.4 |
axsEtherTxQoSStatsQueueDiscardFramesClass1The number of discard frames in the discard class
1 of output priority queue.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1.5 |
axsEtherTxQoSStatsQueueDiscardFramesClass2The number of discard frames in the discard class
2 of output priority queue.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1.6 |
axsEtherTxQoSStatsQueueDiscardFramesClass3The number of discard frames in the discard class
3 of output priority queue.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1.7 |
axsEtherTxQoSStatsQueueDiscardFramesClass4The number of discard frames in the discard class
4 of output priority queue.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1.8 |
axsEthShaper OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.1.6.4 |
axsEthShaperStatsFlowOtherFrmTableA collection of Shaper other Frame statistics kept
for a particular Ethernet Shaper interface. SEQUENCE OF AxsEthShaperStatsFlowOtherFrmEntry .1.3.6.1.4.1.21839.2.2.1.1.6.4.3 |
axsEthShaperStatsFlowOtherFrmEntryAn entry containing Shaper other Frame statistics
for a particular Ethernet Shaper interface. AxsEthShaperStatsFlowOtherFrmEntry .1.3.6.1.4.1.21839.2.2.1.1.6.4.3.1 |
axsEthShaperStatsFlowOtherFrmNifIndexIdentified by a particular value of this index
is same value of NIF.Its value ranges between
1 and the value of ax7800sNifBoardNumber or ax5400sNifBoardNumber. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.4.3.1.1 |
axsEthShaperStatsFlowOtherFrmLineIndexIdentified by a particular value of this index
is same value of Physical Line.Its value ranges
between 1 and the value of ax7800sNifPhysLineNumber or ax5400sNifPhysLineNumber. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.4.3.1.2 |
axsEthShaperStatsFlowOtherFrmOutFramesThe total number of packets transmitted outside of
a target for control out of the NIF.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.4.3.1.3 |
axsEthShaperStatsFlowOtherFrmOutBytesThe total number of octets transmitted outside of
a target for control out of the NIF.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.4.3.1.4 |
axsEthShaperStatsFlowOtherFrmDiscardFramesThe total number of outbound packets outside of
a target for control which were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.4.3.1.5 |
axsEthShaperStatsFlowOtherFrmDiscardBytesThe total number of outbound octets outside of
a target for control which were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.4.3.1.6 |
axsEthShaperAgQue OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.1.6.5 |
axsEthShaperAgQueStatsTableA collection of Shaper statistics kept for a
particular Ethernet Shaper aggregated queue. SEQUENCE OF AxsEthShaperAgQueStatsEntry .1.3.6.1.4.1.21839.2.2.1.1.6.5.1 |
axsEthShaperAgQueStatsEntryAn entry containing Shaper statistics for a
particular Ethernet Shaper aggregated queue. AxsEthShaperAgQueStatsEntry .1.3.6.1.4.1.21839.2.2.1.1.6.5.1.1 |
axsEthShaperAgQueStatsNifIndexIdentified by a particular value of this index
is same value of NIF.Its value ranges between
1 and the value of ax7800sNifBoardNumber or ax5400sNifBoardNumber. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.5.1.1.1 |
axsEthShaperAgQueStatsLineIndexIdentified by a particular value of this index
is same value of Physical Line.Its value ranges
between 1 and the value of ax7800sNifPhysLineNumber or ax5400sNifPhysLineNumber. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.5.1.1.2 |
axsEthShaperAgQueStatsAgNumberThe number of aggregated queue. Its value ranges
between 1 and 1023. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.5.1.1.3 |
axsEthShaperAgQueStatsTotalOutFramesThe total number of packets transmitted out of
the aggregated queue.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.5.1.1.4 |
axsEthShaperAgQueStatsTotalOutBytesThe total number of octets transmitted out of
the aggregated queue.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.5.1.1.5 |
axsEthShaperAgQueStatsTotalDiscardFramesThe total number of outbound packets which
were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.5.1.1.6 |
axsEthShaperAgQueStatsTotalDiscardBytesThe total number of outbound octets which
were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.5.1.1.7 |
axsEthShaperAgQueStatsQueueTableA collection of priority queue statistics. SEQUENCE OF AxsEthShaperAgQueStatsQueueEntry .1.3.6.1.4.1.21839.2.2.1.1.6.5.2 |
axsEthShaperAgQueStatsQueueEntryA entry of priority queue statistics. AxsEthShaperAgQueStatsQueueEntry .1.3.6.1.4.1.21839.2.2.1.1.6.5.2.1 |
axsEthShaperAgQueStatsQueueNifIndexIdentified by a particular value of this index
is same value of NIF.Its value ranges between
1 and the value of ax7800sNifBoardNumber or ax5400sNifBoardNumber. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.5.2.1.1 |
axsEthShaperAgQueStatsQueueLineIndexIdentified by a particular value of this index
is same value of Physical Line.Its value ranges
between 1 and the value of ax7800sNifPhysLineNumber or ax5400sNifPhysLineNumber. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.5.2.1.2 |
axsEthShaperAgQueStatsQueueAgNumberThe number of aggregated queue. Its value ranges
between 1 and 1023. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.5.2.1.3 |
axsEthShaperAgQueStatsQueueQueIndexAn index that uniquely identifies the particular queue.
Its value ranges between 1 and 4. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.5.2.1.4 |
axsEthShaperAgQueStatsQueueOutFramesThe number of packets transmitted out of the priority
queue interface.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.5.2.1.5 |
axsEthShaperAgQueStatsQueueOutBytesThe number of octets transmitted out of the priority
queue interface.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.5.2.1.6 |
axsEthShaperAgQueStatsQueueDiscardFramesThe number of packets which were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.5.2.1.7 |
axsEthShaperAgQueStatsQueueDiscardBytesThe number of octets which were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.5.2.1.8 |
axsEthShaperDefAgQueStatsTableInformation of Shaper statistics. SEQUENCE OF AxsEthShaperDefAgQueStatsEntry .1.3.6.1.4.1.21839.2.2.1.1.6.5.3 |
axsEthShaperDefAgQueStatsEntryEntry of shaper statistics information of Ether shaper defau
lt aggregate queue. AxsEthShaperDefAgQueStatsEntry .1.3.6.1.4.1.21839.2.2.1.1.6.5.3.1 |
axsEthShaperDefAgQueStatsNifIndexIndicates place information of the slot with this NIF. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.5.3.1.1 |
axsEthShaperDefAgQueStatsLineIndexInformation of physical line number. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.5.3.1.2 |
axsEthShaperDefAgQueStatsTotalOutFramesThe number of sent frame of default aggregate queue.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.5.3.1.3 |
axsEthShaperDefAgQueStatsTotalOutBytesThe number of sent bytes of default aggregate queue.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.5.3.1.4 |
axsEthShaperDefAgQueStatsTotalDiscardFramesThe number of discarded frame of default aggregate queue.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.5.3.1.5 |
axsEthShaperDefAgQueStatsTotalDiscardBytesThe number of discarded bytes of default aggregate queue.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.5.3.1.6 |
axsEthShaperDefAgQueStatsQueueTableInformation of shaper statistics per output priority queue o
f default aggregate queue. SEQUENCE OF AxsEthShaperDefAgQueStatsQueueEntry .1.3.6.1.4.1.21839.2.2.1.1.6.5.4 |
axsEthShaperDefAgQueStatsQueueEntryEntry of shaper statistics information per output priority q
ueue of default aggregate queue. AxsEthShaperDefAgQueStatsQueueEntry .1.3.6.1.4.1.21839.2.2.1.1.6.5.4.1 |
axsEthShaperDefAgQueStatsQueueNifIndexIndicates place information of the slot with this NIF. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.5.4.1.1 |
axsEthShaperDefAgQueStatsQueueLineIndexInformation of physical line number. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.5.4.1.2 |
axsEthShaperDefAgQueStatsQueueQueIndexIndicates the value of index which identifies this table ent
ry. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.6.5.4.1.3 |
axsEthShaperDefAgQueStatsQueueOutFramesThe number of sent frame of output priority queue of default
aggregate queue.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.5.4.1.4 |
axsEthShaperDefAgQueStatsQueueOutBytesThe number of sent bytes of output priority queue of default
aggregate queue.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.5.4.1.5 |
axsEthShaperDefAgQueStatsQueueDiscardFramesThe number of discarded frame of output priority queue of de
fault aggregate queue.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.5.4.1.6 |
axsEthShaperDefAgQueStatsQueueDiscardBytesThe number of discarded bytes of output priority queue of de
fault aggregate queue.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.6.5.4.1.7 |
axsDHCP OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.1.10 |
axsDHCPAddrValueThe number of IP addresses which are available
within this Router.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.1.10.1 |
axsDHCPFreeAddrValueThe number of IP addresses which are available
within this Router. May be expressed as either
an absolute value.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.1.10.2 |
axsVlanStats OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.1.11 |
axsVlanStatsTableA collection of VLAN statistics. SEQUENCE OF AxsVlanStatsEntry .1.3.6.1.4.1.21839.2.2.1.1.11.1 |
axsVlanStatsEntryA entry of VLAN statistics. AxsVlanStatsEntry .1.3.6.1.4.1.21839.2.2.1.1.11.1.1 |
axsVlanStatsVlanIndexVLAN ID Gauge32 .1.3.6.1.4.1.21839.2.2.1.1.11.1.1.1 |
axsVlanStatsPortIndexIdentified by a particular value of this index
is same value of port.Its value ranges
between 1 and 65535. INTEGER .1.3.6.1.4.1.21839.2.2.1.1.11.1.1.2 |
axsVlanStatsInOctetsNumber of octets that received on the VLAN.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.11.1.1.3 |
axsVlanStatsInFramesNumber of packets that received on the VLAN.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.11.1.1.4 |
axsVlanStatsInDiscardsThe total number of Inbound packets inside of
a target for control which were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.11.1.1.5 |
axsVlanStatsOutOctetsThe total number of octets transmitted outside of
a target for control out of the VLAN.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.11.1.1.6 |
axsVlanStatsOutFramesThe total number of packets transmitted outside of
a target for control out of the VLAN.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.11.1.1.7 |
axsVlanStatsOutDiscardsThe total number of outbound packets outside of
a target for control which were chosen to be discarded.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.11.1.1.8 |
axsIpStats OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.1.12 |
axsIpNullInDiscardsThe number of ipv4 packets discarded through null-interface.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.12.1 |
axsIpv6NullInDiscardsThe number of ipv6 packets discarded through null-interface.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.12.2 |
axsIpPimRegisterDiscardsThe number of ipv4 packets discarded by register checksum error of PIM.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.1.12.3 |
axsGsrp OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.4 |
axsGsrpGroupTableThe table containing GSRP group information. SEQUENCE OF AxsGsrpGroupEntry .1.3.6.1.4.1.21839.2.2.1.4.1 |
axsGsrpGroupEntryThe list of GSRP group information. AxsGsrpGroupEntry .1.3.6.1.4.1.21839.2.2.1.4.1.1 |
axsGsrpGroupIdGSRP group identifier. INTEGER .1.3.6.1.4.1.21839.2.2.1.4.1.1.1 |
axsGsrpGroupRowStatusValid/Invalid state of this entry. Valid(1) fixedro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.4.1.1.2 |
axsGsrpMacAddressThe Media Access Control Address of this equipment.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.4.1.1.3 |
axsGsrpAdvertiseHoldTimeHolding time of the Advertise frame (milli second).ro INTEGER .1.3.6.1.4.1.21839.2.2.1.4.1.1.4 |
axsGsrpAdvertiseIntervalInterval between transmitting the Advertise frame (milli second).ro INTEGER .1.3.6.1.4.1.21839.2.2.1.4.1.1.5 |
axsGsrpSelectionPatternMaster/Backup selection pattern. Ports-Priority-MAC(1) Priority-Ports-MAC(2)ro Enumeration .1.3.6.1.4.1.21839.2.2.1.4.1.1.6 |
axsGsrpLayer3RedundancyThe status of layer 3 redundancy-change.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.4.1.1.7 |
axsGsrpVlanGroupTableThe table containing GSRP VLAN group information. SEQUENCE OF AxsGsrpVlanGroupEntry .1.3.6.1.4.1.21839.2.2.1.4.2 |
axsGsrpVlanGroupEntryThe list of GSRP VLAN group information. AxsGsrpVlanGroupEntry .1.3.6.1.4.1.21839.2.2.1.4.2.1 |
axsGsrpVlanGroupIdGSRP VLAN group number(1~128) INTEGER .1.3.6.1.4.1.21839.2.2.1.4.2.1.1 |
axsGsrpVlanGroupRowStatusValid/Invalid state of this entry. Valid(1) fixedro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.4.2.1.2 |
axsGsrpStateThe state of GSRP group..ro Enumeration .1.3.6.1.4.1.21839.2.2.1.4.2.1.3 |
axsGsrpPriorityConfigured priority.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.4.2.1.4 |
axsGsrpActivePortsThe number of port which is link-up in monitored port.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.4.2.1.5 |
axsGsrpTransitionToMasterCountsThe number of times which shifted to the master state from the backup state.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.4.2.1.6 |
axsGsrpTransitionFromMasterCountsThe number of times which shifted to the backup state from the master state.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.4.2.1.7 |
axsGsrpLastTransitionTimeThe last time at which changed in the master state from the backup state or in the backup state from the master state.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.4.2.1.8 |
axsGsrpVirtualMacAddressThe virtual Media Access Control address of the GSRP VLAN group. If the status of layer 3 redundancy-change is off, return 00 00 00 00 00 00ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.4.2.1.9 |
axsGsrpNeighborGroupTableThe table containing stores the GSRP group information on facing equipment. SEQUENCE OF AxsGsrpNeighborGroupEntry .1.3.6.1.4.1.21839.2.2.1.4.3 |
axsGsrpNeighborGroupEntryThe table containing stores the GSRP group information on facing equipment. AxsGsrpNeighborGroupEntry .1.3.6.1.4.1.21839.2.2.1.4.3.1 |
axsGsrpNeighborGroupIdThe GSRP group identifier on the facing equipment. INTEGER .1.3.6.1.4.1.21839.2.2.1.4.3.1.1 |
axsGsrpNeighborMacAddressThe Media Access Control Address of the facing equipment. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.4.3.1.2 |
axsGsrpNeighborAdvertiseHoldTimeHolding time of the Advertise frame on opposite equipment (milli second).ro INTEGER .1.3.6.1.4.1.21839.2.2.1.4.3.1.3 |
axsGsrpNeighborAdvertiseIntervalInterval between transmitting the Advertise frame on the facing equipment (milli second).ro INTEGER .1.3.6.1.4.1.21839.2.2.1.4.3.1.4 |
axsGsrpNeighborSelectionPatternMaster/Backup selection pattern on the facing equipment. Ports-Priority-MAC(1) Priority-Ports-MAC(2)ro Enumeration .1.3.6.1.4.1.21839.2.2.1.4.3.1.5 |
axsGsrpNeighborVlanGroupTableThe table containing the GSRP VLAN group information on facing equipment. SEQUENCE OF AxsGsrpNeighborVlanGroupEntry .1.3.6.1.4.1.21839.2.2.1.4.4 |
axsGsrpNeighborVlanGroupEntryThe table containing the GSRP VLAN group information on facing equipment. AxsGsrpNeighborVlanGroupEntry .1.3.6.1.4.1.21839.2.2.1.4.4.1 |
axsGsrpNeighborVlanGroupIdGSRP VLAN group number on the facing equipment (1~128). INTEGER .1.3.6.1.4.1.21839.2.2.1.4.4.1.1 |
axsGsrpNeighborStateThe state of GSRP group on the facing equipment. Enumeration .1.3.6.1.4.1.21839.2.2.1.4.4.1.2 |
axsGsrpNeighborPriorityConfigured priority on the facing equipment.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.4.4.1.3 |
axsGsrpNeighborActivePortsThe number of port which is link-up in monitored port on the facing equipment.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.4.4.1.4 |
axsFdb OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.5 |
axsFdbCounterTableThe table of FDB information. SEQUENCE OF AxsFdbCounterEntry .1.3.6.1.4.1.21839.2.2.1.5.1 |
axsFdbCounterEntryThe entry of FDB information. AxsFdbCounterEntry .1.3.6.1.4.1.21839.2.2.1.5.1.1 |
axsFdbCounterNifIndexIdentified by a particular value of this index
is same value of NIF.Its value ranges between 1
and the value of ax7800sNifBoardNumber or ax5400sNifBoardNumber. INTEGER .1.3.6.1.4.1.21839.2.2.1.5.1.1.1 |
axsFdbCounterLineIndexIdentified by a particular value of this index
is same value of Physical Line.Its value ranges
between 1 and the value of ax7800sNifLineNumber or ax5400sNifLineNumber. INTEGER .1.3.6.1.4.1.21839.2.2.1.5.1.1.2 |
axsFdbCounterCountsThe number of FDB entries learned on the port.ro Counter32 .1.3.6.1.4.1.21839.2.2.1.5.1.1.3 |
axsFdbCounterTypeThe type of FDB entries learning.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.5.1.1.4 |
axsFdbCounterLimitsThe maximum number of FDB entries that can be learned on the port.
0 :Study prohibition.
1-100,000: Number set by limit-learning subcommand of composition
definition command fdb.
When axsFdbCounterType is Unlimited(0), it becomes 0 fixation.ro Counter32 .1.3.6.1.4.1.21839.2.2.1.5.1.1.5 |
axsVlan OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.6 |
axsVlanBridge OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.6.1 |
axsVlanBridgeBase OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.6.1.1 |
axsVBBaseTableAn information table of dot1dBase by VLAN units. SEQUENCE OF AxsVBBaseEntry .1.3.6.1.4.1.21839.2.2.1.6.1.1.1 |
axsVBBaseEntryAn informatin entry of every VLAN ID of axsVBBaseTable. AxsVBBaseEntry .1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1 |
axsVBBaseIndexVLAN ID.ro VlanIndex .1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.1 |
axsVBBaseBridgeAddressMAC address of VLAN.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.2 |
axsVBBaseNumPortsThe number of ports set at VLAN.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.3 |
axsVBBaseTypeA bridging type VLAN may perform.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.4 |
axsVBBaseVlanIfIndexValue of ifIndex of interface of VLAN.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.5 |
axsVBBaseVlanTypeVLAN type.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.6 |
axsVBBaseVlanIDValue of VID of VLAN-TAG corresponding VLAN.ro VlanIdOrZero .1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.7 |
axsVBBaseAssociatedPrimaryVlanReturns VLAN ID of Primary VLAN when private VLAN is used and
the same VLAN is set at secondary VLAN.ro VlanIdOrZero .1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.8 |
axsVBBaseIfStatusStatus of interface against upper level protocol of VLAN.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.9 |
axsVBBaseLastChangeValue of sysUpTime which is set when VLAN topology changes.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.10 |
axsVBBasePrivateVlanTypeA private VLAN type of VLAN.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.11 |
axsVBBasePortTableAn information table of dot1dBasePortTable by VLAN units. SEQUENCE OF AxsVBBasePortEntry .1.3.6.1.4.1.21839.2.2.1.6.1.1.2 |
axsVBBasePortEntryA configuration entry of axsVBBaseTable. AxsVBBasePortEntry .1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1 |
axsVBBasePortIndexVLAN ID.ro VlanIndex .1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.1 |
axsVBBasePortPort number of ports set at VLAN.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.2 |
axsVBBasePortIfIndexValue of ifIndex corresponding ports set at VLAN.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.3 |
axsVBBasePortCircuitIdentifier which identifieds ports when VLAN ports
have the same value as axsVBBasePortIfIndex.ro OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.4 |
axsVBBasePortDelayExceededDiscardsTotal number of discard frame caused by passing delay occured at VLAN ports.ro Counter .1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.5 |
axsVBBasePortMtuExceededDiscardsTotal number of discard frame caused by data over flow occured at VLAN ports.ro Counter .1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.6 |
axsVBBasePortStateSTP port status of port set at VLAN.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.7 |
axsVBBasePortTaggedStateStatus of VLAN-TAG configuration of ports set at VLAN.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.8 |
axsVBBasePortTranslatedTagIDTranslated ID of VLAN when TAG translation is set.ro VlanIdOrZero .1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.9 |
axsVlanBridgeStp OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.6.1.2 |
axsVBStpTableAn information table of dot1dStpTable by VLAN units. SEQUENCE OF AxsVBStpEntry .1.3.6.1.4.1.21839.2.2.1.6.1.2.1 |
axsVBStpEntryA configuration entry of axsVBStpTable. AxsVBStpEntry .1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1 |
axsVBStpIndexVLAN ID.ro VlanIndex .1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.1 |
axsVBStpProtocolSpecificationA kind of spanning tree protocol by VLAN units.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.2 |
axsVBStpPriorityPriority value of spanning tree by VLAN units.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.3 |
axsVBStpTimeSinceTopologyChangeElapsed time since topology change of spanning tree by VLAN units.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.4 |
axsVBStpTopChangesThe number of times of topology changes of spanning tree by VLAN units.ro Counter .1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.5 |
axsVBStpDesignatedRootRoot bridge identifier of spanning tree by VLAN units.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.6 |
axsVBStpRootCostRoot path cost kept by spanning tree by VLAN units.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.7 |
axsVBStpRootPortRoot port value kept by spanning tree by VLAN units.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.8 |
axsVBStpMaxAgeMaximum aging time kept by spanning tree by VLAN units.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.9 |
axsVBStpHelloTimeHello time kept by spanning tree by VLAN units.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.10 |
axsVBStpHoldTimeHold time kept by spanning tree by VLAN units.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.11 |
axsVBStpForwardDelayTransfer delay time kept by spanning tree by VLAN units.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.12 |
axsVBStpBridgeMaxAgeMaximum aging time used when spanning tree acts as a root bridge by VLAN units.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.13 |
axsVBStpBridgeHelloTimeHello time used when spanning tree act as a root bridge by VLAN units.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.14 |
axsVBStpBridgeForwardDelayTransfer delay time used when spanning tree act as a root bridge by VLAN units.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.15 |
axsVBStpPortTableAn information table of dot1dStpPortTable by VLAN units. SEQUENCE OF AxsVBStpPortEntry .1.3.6.1.4.1.21839.2.2.1.6.1.2.2 |
axsVBStpPortEntryA configuration entry of axsVBStpPortTable. AxsVBStpPortEntry .1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1 |
axsVBStpPortIndexVLAN ID.ro VlanIndex .1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.1 |
axsVBStpPortPort number corresponding configuration entry.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.2 |
axsVBStpPortPriorityPriority of port by VLAN units.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.3 |
axsVBStpPortStatePresent status of port by VLAN units.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.4 |
axsVBStpPortEnableValue whether spanning tree is enabled or not at the port by VLAN units.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.5 |
axsVBStpPortPathCostPath cost value of the port by VLAN units.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.6 |
axsVBStpPortDesignatedRootValue of root bridge identifier by VLAN units stored in BPDU from specified bridge.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.7 |
axsVBStpPortDesignatedCostPath cost value of specified port connected to the port by VLAN units.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.8 |
axsVBStpPortDesignatedBridgeBridge identifier of bridge which this port regards as specified bridge by VLAN units.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.9 |
axsVBStpPortDesignatedPortPort identifier of specified bridge connected to this port by VLAN units.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.10 |
axsVBStpPortForwardTransitionsThe number of times of changes from learning status into forwarding status.ro Counter .1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.11 |
axsVlanBridgeTp OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.6.1.4 |
axsVBTpTableA dot1dTp information table by VLAN units. SEQUENCE OF AxsVBTpEntry .1.3.6.1.4.1.21839.2.2.1.6.1.4.1 |
axsVBTpEntryA configuration entry of axsVBTpTable. AxsVBTpEntry .1.3.6.1.4.1.21839.2.2.1.6.1.4.1.1 |
axsVBTpIndexVLAN ID.ro VlanIndex .1.3.6.1.4.1.21839.2.2.1.6.1.4.1.1.1 |
axsVBTpLearnedEntryDiscardsThe number of discarded entries because of lack of
not-used domain in filtering data base.ro Counter .1.3.6.1.4.1.21839.2.2.1.6.1.4.1.1.2 |
axsVBTpAgingTimeTime-out time to aging-out entry of filtering date base which is learned dynamically.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.4.1.1.3 |
axsVBTpFdbTableAn information of dot1dTpFdbTable by VLAN units. SEQUENCE OF AxsVBTpFdbEntry .1.3.6.1.4.1.21839.2.2.1.6.1.4.2 |
axsVBTpFdbEntryA configuration entry of axsVBTpFdbTable. AxsVBTpFdbEntry .1.3.6.1.4.1.21839.2.2.1.6.1.4.2.1 |
axsVBTpFdbIndexVLAN ID.ro VlanIndex .1.3.6.1.4.1.21839.2.2.1.6.1.4.2.1.1 |
axsVBTpFdbAddressUnicast MAC address of filtering data base entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.6.1.4.2.1.2 |
axsVBTpFdbPortIndicates that it hasn't learnt port number when
port number 0 receives frame having MAC address
as source address which axsVBTpFdbAddress indicates.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.4.2.1.3 |
axsVBTpFdbStatusStatus of filtering data base.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.6.1.4.2.1.4 |
axsVBTpPortTableAn information table of dot1dTpPortTable by VLAN units. SEQUENCE OF AxsVBTpPortEntry .1.3.6.1.4.1.21839.2.2.1.6.1.4.3 |
axsVBTpPortEntryAn information entry of axsVBTpPortTable of ports. AxsVBTpPortEntry .1.3.6.1.4.1.21839.2.2.1.6.1.4.3.1 |
axsVBTpPortIndexVLAN ID.ro VlanIndex .1.3.6.1.4.1.21839.2.2.1.6.1.4.3.1.1 |
axsVBTpPortPort number that indicates which port management
information in the entry corresponds.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.4.3.1.2 |
axsVBTpPortMaxInfoMaximum INFO field size of the port by VLAN units.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.4.3.1.3 |
axsVBTpPortInFramesThe number of reception frame of the port by VLAN units.ro Counter .1.3.6.1.4.1.21839.2.2.1.6.1.4.3.1.4 |
axsVBTpPortOutFramesThe number of sending frame of the port by VLAN units.ro Counter .1.3.6.1.4.1.21839.2.2.1.6.1.4.3.1.5 |
axsVBTpPortInDiscardsThe number of reception discard frame of the port by VLAN units.ro Counter .1.3.6.1.4.1.21839.2.2.1.6.1.4.3.1.6 |
axsVlanBridgeStatic OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.6.1.5 |
axsVBStaticTableAn information table of dot1dStaticTable by VLAN units. SEQUENCE OF AxsVBStaticEntry .1.3.6.1.4.1.21839.2.2.1.6.1.5.1 |
axsVBStaticEntryA configuration entry of axsVBStaticTable. AxsVBStaticEntry .1.3.6.1.4.1.21839.2.2.1.6.1.5.1.1 |
axsVBStaticIndexVLAN ID.ro VlanIndex .1.3.6.1.4.1.21839.2.2.1.6.1.5.1.1.1 |
axsVBStaticAddressMAC address of eather unicast, group or broadcast.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.6.1.5.1.1.2 |
axsVBStaticReceivePortReception port number which is applied the entry.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.6.1.5.1.1.3 |
axsVBStaticAllowedToGoToBit map of port indicating destination port when transfering
frame whose destination is MAC address kept by this entryro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.6.1.5.1.1.4 |
axsVBStaticStatusStatus of the entry.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.6.1.5.1.1.5 |
axsVlanBridgeMaxVlansMaximum value of VLAN ID of this device.ro VlanIndex .1.3.6.1.4.1.21839.2.2.1.6.1.101 |
axsVlanBridgeMaxSpansMaximum value of VLAN ID of VLAN which may operate
spanning tree in this device.ro VlanIndex .1.3.6.1.4.1.21839.2.2.1.6.1.102 |
axsVlanTagTranslation OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.6.10 |
axsVlanTagTranslationTableThe information table about a Tag conversion function SEQUENCE OF AxsVlanTagTranslationEntry .1.3.6.1.4.1.21839.2.2.1.6.10.1 |
axsVlanTagTranslationEntryThe entry of the information table about a Tag conversion function AxsVlanTagTranslationEntry .1.3.6.1.4.1.21839.2.2.1.6.10.1.1 |
axsVlanTagTranslationVlanIdVLAN ID which has set up the Tag conversion function INTEGER .1.3.6.1.4.1.21839.2.2.1.6.10.1.1.1 |
axsVlanTagTranslationTranslatedIdTranslated ID set up by the Tag conversion function INTEGER .1.3.6.1.4.1.21839.2.2.1.6.10.1.1.2 |
axsVlanTagTranslationPortsThe port list which has set up the same Translated ID by the same VLAN by the Tag conversion functionro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.21839.2.2.1.6.10.1.1.3 |
axsOadp OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.7 |
axsOadpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.7.1 |
axsOadpGlobalInfo OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.7.1.1 |
axsOadpGlobalActiveOperation status of OADP function. Status set
by enable or disable in Oadp configuration.
enable : 1
disable: 2ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.7.1.1.1 |
axsOadpGlobalCdpActiveOperation status of CDP reception function.
Status whether cdp-listener is set or not in oadp configuration.
cdp-listener : 1
cdp-listener is not set: 2ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.7.1.1.2 |
axsOadpGlobalMessageIntervalSending interval of OADP frame. The value of interval-time in oadp configuration.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.7.1.1.3 |
axsOadpGlobalHoldTimeNeighbor divice's holding time of OADP frame which this device send.
The value of hold-time in oadp configuration.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.7.1.1.4 |
axsOadpGlobalCacheLastChangeValue of sysUpTime which is set when axsOadpNeighborTable is updated.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.21839.2.2.1.7.1.1.5 |
axsOadpGlobalNameDevice identifier.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.7.1.1.6 |
axsOadpGlobalNameTypeKind of axsOadpGlobalName.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.7.1.1.7 |
axsOadpPortInfo OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.7.1.2 |
axsOadpPortConfigTableA table of OADP port information. SEQUENCE OF AxsOadpPortConfigEntry .1.3.6.1.4.1.21839.2.2.1.7.1.2.1 |
axsOadpPortConfigEntryAn entry of OADP port information. AxsOadpPortConfigEntry .1.3.6.1.4.1.21839.2.2.1.7.1.2.1.1 |
axsOadpPortConfigIfIndexPort identification index. The same value as ifIndex.
This is only for physical ports and LA ports which are given
ifIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.21839.2.2.1.7.1.2.1.1.1 |
axsOadpPortConfigActiveStatus of specified port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.7.1.2.1.1.2 |
axsOadpNeighborInfo OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.7.1.3 |
axsOadpNeighborTableA table of OADP neighbor nodes. SEQUENCE OF AxsOadpNeighborEntry .1.3.6.1.4.1.21839.2.2.1.7.1.3.1 |
axsOadpNeighborEntryAn entry of OADP neighbor nodes. AxsOadpNeighborEntry .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1 |
axsOadpIfIndexifIndex of reception interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.1 |
axsOadpTagIDTag ID of IEEE802.1Q which is attached MAC frame.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.2 |
axsOadpNeighborIndexUnique numeric which identifies neighbor nodesro INTEGER .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.3 |
axsOadpNeighborTagIDValue set at TagID TLV in OADP PDU which is sent from neighbor node.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.4 |
axsOadpNeighborVendorTypeProtocol type used to find to neighbor nodes.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.5 |
axsOadpNeighborSNMPAgentAddressTypeA kind of agent address to get information by SNMP.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.6 |
axsOadpNeighborSNMPAgentAddressDisplayString formed information of agent address to get information by SNMP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.7 |
axsOadpNeighborDescrString of sysDescr of neighbor node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.8 |
axsOadpNeighborDeviceIDNeighbor node's device identifier.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.9 |
axsOadpNeighborSlotPortUnique string which identifies neighbor's sending interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.10 |
axsOadpNeighborIfIndexifIndex of sending interface of neighbor node.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.11 |
axsOadpNeighborIfSpeedifSpeed of sending interface of neighbor node.ro Gauge .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.12 |
axsOadpNeighborDeviceTypeDevice name of neighbor node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.13 |
axsOadpNeighborServiceFunctions neighbor node can offer.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.14 |
axsOadpNeighborVTPMgmtDomainVTP Management Domain of sending interface of neighbor node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.15 |
axsOadpNeighborNativeVLANNative VLAN number of sending interface of neighbor node.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.16 |
axsOadpNeighborDuplexDuplex information of sending interface of neighbor node.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.17 |
axsOadpNeighborApplianceIDAppliance ID of neighbor node.ro Gauge .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.18 |
axsOadpNeighborVlanIDVLAN ID for VoIP of neighbor node.ro Gauge .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.19 |
axsOadpNeighborPowerConsumptionElectric power comsumption of neighbor node.ro Gauge .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.20 |
axsOadpNeighborMTUMTU of sending interface of neighbor node.ro Gauge .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.21 |
axsOadpNeighborSysNamesysName of neighbor node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.22 |
axsOadpNeighborSysObjectIDsysObjectID of neighbor node.ro OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.23 |
axsOadpNeighborSecondarySNMPAgentAddressTypeA kind of agent secondary address to get information by SNMP.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.24 |
axsOadpNeighborSecondarySNMPAgentAddressDisplayString formed information of agent secondary address to get information by SNMP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.25 |
axsOadpNeighborPhysLocationsysLocation of neighbor node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.26 |
axsOadpNeighborCacheLastChangeValue of sysUpTime which is set when axsOadpNeighborEntry about neighbor node is updated.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.27 |
axsOadpNeighborIfHighSpeedifHighSpeed of sending interface of neighbor node.ro Gauge .1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.28 |
axsOadpMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.7.2 |
axsOadpNeighborCachelastChangeTrapThis trap indicates that information of OADP neighbor nodes is updated. TRAP-TYPE .1.3.6.1.4.1.21839.2.2.1.7.2.0.1 |
axsFlow OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.8 |
axsFlowResources OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.8.2 |
axsFlowResourcesSystemUsedThe number of entries used for flow filter function, flow Qo
S function, NetFlow statistics information function per devic
e.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.1 |
axsFlowResourcesSystemFreeThe number of empty entries usable for flow filter function,
flow QoS function, NetFlow statistics information function p
er device.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.2 |
axsFlowResourcesSystemMaxThe maximum number of entries usable for flow filter functio
n, flow Qos function, NetFlow statistics information function
.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.3 |
axsFlowResourcesSystemNetflowUsedThe number of entries used for NetFlow statistics informatio
n.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.4 |
axsFlowResourcesSystemPolicyUsedThe number of entries used for policy routing function per d
evice.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.5 |
axsFlowResourcesSystemPolicyMaxThe maximum number of entries usable for policy routing func
tion per device.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.6 |
axsFlowResourcesTableInformation of FlowResources table. SEQUENCE OF AxsFlowResourcesEntry .1.3.6.1.4.1.21839.2.2.1.8.2.7 |
axsFlowResourcesEntryEntry of FlowResources. AxsFlowResourcesEntry .1.3.6.1.4.1.21839.2.2.1.8.2.7.1 |
axsFlowResourcesIndexIndicates place information of the slot with PRU which ident
ifies this table entries. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.7.1.1 |
axsFlowResourcesFilterUsedThe number of entries used for flow filter function per PRU.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.7.1.2 |
axsFlowResourcesFilterFreeThe number of entries usable for flow filter function per PR
U.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.7.1.3 |
axsFlowResourcesQosUsedThe number of entries used for flow QoS functions per PRU.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.7.1.4 |
axsFlowResourcesNetflowUsedThe number of entries used for NetFlow statistics informatio
n per PRU.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.7.1.5 |
axsFlowResourcesQosFreeThe number of empty entries usable for flow QoS function, Ne
tFlow statistics information function per PRU.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.7.1.6 |
axsFlowResourcesUpcUsedThe number of entries used for UPC per PRU.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.7.1.7 |
axsFlowResourcesUpcFreeThe number of empty entries usable for UPC per PRU.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.7.1.8 |
axsFlowResourcesPolicyUsedThe number of entries used for policy routing function per P
RU.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.7.1.9 |
axsFlowResourcesFilterInterfaceInTableInformation of Resources table of flow filter function per i
nterface or physical port.(Inbound) SEQUENCE OF AxsFlowResourcesFilterInterfaceInEntry .1.3.6.1.4.1.21839.2.2.1.8.2.8 |
axsFlowResourcesFilterInterfaceInEntryEntry of FlowResourcesFilterInterface. AxsFlowResourcesFilterInterfaceInEntry .1.3.6.1.4.1.21839.2.2.1.8.2.8.1 |
axsFlowResourcesFilterInterfaceInifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.8.1.1 |
axsFlowResourcesFilterInterfaceInifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.8.1.2 |
axsFlowResourcesFilterInterfaceInUsedThe number of entries used for flow filter function per inte
rface or physical port.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.8.1.3 |
axsFlowResourcesFilterInterfaceOutTableInformation of Resources table of flow filter function per i
nterface or physical port.(Outbound) SEQUENCE OF AxsFlowResourcesFilterInterfaceOutEntry .1.3.6.1.4.1.21839.2.2.1.8.2.9 |
axsFlowResourcesFilterInterfaceOutEntryEntry of FlowResourcesFilterInterface. AxsFlowResourcesFilterInterfaceOutEntry .1.3.6.1.4.1.21839.2.2.1.8.2.9.1 |
axsFlowResourcesFilterInterfaceOutifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.9.1.1 |
axsFlowResourcesFilterInterfaceOutifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.9.1.2 |
axsFlowResourcesFilterInterfaceOutUsedThe number of entries used for flow filter function per inte
rface or physical port.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.9.1.3 |
axsFlowResourcesQosInterfaceInTableInformation of Resources table of flow QoS function per inte
rface or physical port.(Inbound) SEQUENCE OF AxsFlowResourcesQosInterfaceInEntry .1.3.6.1.4.1.21839.2.2.1.8.2.10 |
axsFlowResourcesQosInterfaceInEntryEntry of FlowResourcesQosInterface. AxsFlowResourcesQosInterfaceInEntry .1.3.6.1.4.1.21839.2.2.1.8.2.10.1 |
axsFlowResourcesQosInterfaceInifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.10.1.1 |
axsFlowResourcesQosInterfaceInifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.10.1.2 |
axsFlowResourcesQosInterfaceInUsedThe number of entries used for flow Qos function per inte
rface or physical port.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.10.1.3 |
axsFlowResourcesQosInterfaceOutTableInformation of Resources table of flow QoS function per inte
rface or physical port.(Outbound) SEQUENCE OF AxsFlowResourcesQosInterfaceOutEntry .1.3.6.1.4.1.21839.2.2.1.8.2.11 |
axsFlowResourcesQosInterfaceOutEntryEntry of FlowResourcesQosInterface. AxsFlowResourcesQosInterfaceOutEntry .1.3.6.1.4.1.21839.2.2.1.8.2.11.1 |
axsFlowResourcesQosInterfaceOutifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.11.1.1 |
axsFlowResourcesQosInterfaceOutifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.11.1.2 |
axsFlowResourcesQosInterfaceOutUsedThe number of entries used for flow filter function per inte
rface or physical port.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.11.1.3 |
axsFlowResourcesFilterListInTableInformation of Resources table of flow filter function per l
ist.(Inbound) SEQUENCE OF AxsFlowResourcesFilterListInEntry .1.3.6.1.4.1.21839.2.2.1.8.2.12 |
axsFlowResourcesFilterListInEntryEntry of FlowResourcesFilterList. AxsFlowResourcesFilterListInEntry .1.3.6.1.4.1.21839.2.2.1.8.2.12.1 |
axsFlowResourcesFilterListInifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.12.1.1 |
axsFlowResourcesFilterListInifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.12.1.2 |
axsFlowResourcesFilterListInNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.12.1.3 |
axsFlowResourcesFilterListInUsedThe number of entries used for flow filter function per list
.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.12.1.4 |
axsFlowResourcesFilterListOutTableInformation of Resources table of flow filter function per l
ist.(Outbound) SEQUENCE OF AxsFlowResourcesFilterListOutEntry .1.3.6.1.4.1.21839.2.2.1.8.2.13 |
axsFlowResourcesFilterListOutEntryEntry of FlowResourcesFilterList. AxsFlowResourcesFilterListOutEntry .1.3.6.1.4.1.21839.2.2.1.8.2.13.1 |
axsFlowResourcesFilterListOutifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.13.1.1 |
axsFlowResourcesFilterListOutifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.13.1.2 |
axsFlowResourcesFilterListOutNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.13.1.3 |
axsFlowResourcesFilterListOutUsedThe number of entries used for flow filter function per list
.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.13.1.4 |
axsFlowResourcesQosListInTableInformation of Resources table of flow QoS function per list
.(Inbound) SEQUENCE OF AxsFlowResourcesQosListInEntry .1.3.6.1.4.1.21839.2.2.1.8.2.14 |
axsFlowResourcesQosListInEntryEntry of FlowResourcesQoSList. AxsFlowResourcesQosListInEntry .1.3.6.1.4.1.21839.2.2.1.8.2.14.1 |
axsFlowResourcesQosListInifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.14.1.1 |
axsFlowResourcesQosListInifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.14.1.2 |
axsFlowResourcesQosListInNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.14.1.3 |
axsFlowResourcesQosListInUsedThe number of entries used for flow QoS function per list
.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.14.1.4 |
axsFlowResourcesQosListOutTableInformation of Resources table of flow QoS function per list
.(Outbound) SEQUENCE OF AxsFlowResourcesQosListOutEntry .1.3.6.1.4.1.21839.2.2.1.8.2.15 |
axsFlowResourcesQosListOutEntryEntry of FlowResourcesQoSList. AxsFlowResourcesQosListOutEntry .1.3.6.1.4.1.21839.2.2.1.8.2.15.1 |
axsFlowResourcesQosListOutifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.15.1.1 |
axsFlowResourcesQosListOutifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.15.1.2 |
axsFlowResourcesQosListOutNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.15.1.3 |
axsFlowResourcesQosListOutUsedThe number of entries used for flow QoS function per list
.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.2.15.1.4 |
axsFlowFilter OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.8.3 |
axsFlowFilterInTableInformation of flow filter detection condition table.(Inboun
d) SEQUENCE OF AxsFlowFilterInEntry .1.3.6.1.4.1.21839.2.2.1.8.3.1 |
axsFlowFilterInEntryEntry of flow filter detection condition. AxsFlowFilterInEntry .1.3.6.1.4.1.21839.2.2.1.8.3.1.1 |
axsFlowFilterInifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.1 |
axsFlowFilterInifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2(2)fixed. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.2 |
axsFlowFilterInListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.3 |
axsFlowFilterInSrcMacOpIndicates specification method of source MAC address on dete
ction condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.4 |
axsFlowFilterInSrcMacIndicates source MAC address on detection condition.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.5 |
axsFlowFilterInSrcMacMaskIndicates mask of source MAC address on detection specificat
ion.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.6 |
axsFlowFilterInDestMacOpIndicates specification method of destination MAC address on
detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.7 |
axsFlowFilterInDestMacIndicates destination MAC address on detection condition.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.8 |
axsFlowFilterInDestMacMaskIndicates mask of destination MAC address on detection speci
fication.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.9 |
axsFlowFilterInEthernetTypeIndicates type of ethernet V2 and IEEE802.3 SNAP/RFC1042 for
m on detection condition.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.10 |
axsFlowFilterInUserPriorityIndicates user priority in Tag-VLAN on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.11 |
axsFlowFilterInLowerVlanListBit map representation of VLAN ID on detection condition.(He
ad 1 bit indicates existence of untagged definition, and the
rest effective or non-effective of VLAN 1-2047.)ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.12 |
axsFlowFilterInHigherVlanListBit map representation of VLAN ID on detection condition.(Ea
ch bit indicates whether VLAN 2048-4095 is effective or non-e
ffective in order.)ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.13 |
axsFlowFilterInProtocolNumberIndicates upper protocol number on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.14 |
axsFlowFilterInIpAddrTypeIndicates IP address type which is shown.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.15 |
axsFlowFilterInSrcIpOpIndicates specification method of source IP address on detec
tion condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.16 |
axsFlowFilterInSrcIpIndicates source IP address on detection condition.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.17 |
axsFlowFilterInSrcIpLengthIndicates subnet mask length(ipv4) or prefix length(ipv6) of
source IP address on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.18 |
axsFlowFilterInSrcIpRangeSource IP address in range specified by detection condition.
(maximum IP address)ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.19 |
axsFlowFilterInDestIpOpIndicates specification method of destination IP address on
detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.20 |
axsFlowFilterInDestIpIndicates destination IP address on detection condition.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.21 |
axsFlowFilterInDestIpLengthIndicates subnet mask length(ipv4) or prefix length(ipv6) of
destination IP address on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.22 |
axsFlowFilterInDestIpRangeDestination IP address in range specified by detection condi
tion.(maximum IP address)ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.23 |
axsFlowFilterInDscpThe value of DSCP on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.24 |
axsFlowFilterInPrecedenceThe value of precedence on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.25 |
axsFlowFilterInUpperLengthThe upper limit of IP user data length on detection conditio
n.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.26 |
axsFlowFilterInLowerLengthThe lower limit of IP user data length on detection conditio
n.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.27 |
axsFlowFilterInFragmentsIndicates whether 2nd fragment packet or later are included
in detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.28 |
axsFlowFilterInSrcPortOpIndicates specification method of source port number on dete
ction condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.29 |
axsFlowFilterInSrcPortIndicates source port number on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.30 |
axsFlowFilterInSrcPortRangeSource port number in range specified by detection condition
.(maximum port number)ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.31 |
axsFlowFilterInDestPortOpIndicates specification method of destination port number on
detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.32 |
axsFlowFilterInDestPortIndicates destination port number on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.33 |
axsFlowFilterInDestPortRangedestination port number in range specified by detection cond
ition.(maximum port number)ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.34 |
axsFlowFilterInAckFlagIndicates whether TCP one-way communication permission is in
cluded in detection condition or not.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.35 |
axsFlowFilterInSynFlagIndicates whether virtual circuit link-up permission is incl
uded in detection condition or not.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.36 |
axsFlowFilterInIcmpTypeIndicates ICMP or ICMPv6 type on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.37 |
axsFlowFilterInIcmpCodeIndicates ICMP or ICMPv6 code on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.38 |
axsFlowFilterInIgmpTypeIndicates IGMP type on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.1.1.39 |
axsFlowFilterOutTableInformation of flow filter detection condition table.(Outbou
nd) SEQUENCE OF AxsFlowFilterOutEntry .1.3.6.1.4.1.21839.2.2.1.8.3.2 |
axsFlowFilterOutEntryEntry of flow filter detection condition. AxsFlowFilterOutEntry .1.3.6.1.4.1.21839.2.2.1.8.3.2.1 |
axsFlowFilterOutifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.1 |
axsFlowFilterOutifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2(2)fixed. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.2 |
axsFlowFilterOutListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.3 |
axsFlowFilterOutSrcMacOpIndicates specification method of source MAC address on dete
ction condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.4 |
axsFlowFilterOutSrcMacIndicates source MAC address on detection condition.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.5 |
axsFlowFilterOutSrcMacMaskIndicates mask of source MAC address on detection specificat
ion.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.6 |
axsFlowFilterOutDestMacOpIndicates specification method of destination MAC address on
detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.7 |
axsFlowFilterOutDestMacIndicates destination MAC address on detection condition.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.8 |
axsFlowFilterOutDestMacMaskIndicates mask of destination MAC address on detection speci
fication.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.9 |
axsFlowFilterOutEthernetTypeIndicates type of ethernet V2 and IEEE802.3 SNAP/RFC1042 for
m on detection condition.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.10 |
axsFlowFilterOutUserPriorityIndicates user priority in Tag-VLAN on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.11 |
axsFlowFilterOutLowerVlanListBit map representation of VLAN ID on detection condition.(He
ad 1 bit indicates existence of untagged definition, and the
rest effective or non-effective of VLAN 1-2047.)ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.12 |
axsFlowFilterOutHigherVlanListBit map representation of VLAN ID on detection condition.(Ea
ch bit indicates whether VLAN 2048-4095 is effective or non-e
ffective in order.)ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.13 |
axsFlowFilterOutProtocolNumberIndicates upper protocol number on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.14 |
axsFlowFilterOutIpAddrTypeIndicates IP address type which is shown.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.15 |
axsFlowFilterOutSrcIpOpIndicates specification method of source IP address on detec
tion condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.16 |
axsFlowFilterOutSrcIpIndicates source IP address on detection condition.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.17 |
axsFlowFilterOutSrcIpLengthIndicates subnet mask length(ipv4) or prefix length(ipv6) of
source IP address on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.18 |
axsFlowFilterOutSrcIpRangeSource IP address in range specified by detection condition.
(maximum IP address)ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.19 |
axsFlowFilterOutDestIpOpIndicates specification method of destination IP address on
detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.20 |
axsFlowFilterOutDestIpIndicates destination IP address on detection condition.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.21 |
axsFlowFilterOutDestIpLengthIndicates subnet mask length(ipv4) or prefix length(ipv6) of
destination IP address on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.22 |
axsFlowFilterOutDestIpRangeDestination IP address in range specified by detection condi
tion.(maximum IP address)ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.23 |
axsFlowFilterOutDscpThe value of DSCP on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.24 |
axsFlowFilterOutPrecedenceThe value of precedence on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.25 |
axsFlowFilterOutUpperLengthThe upper limit of IP user data length on detection conditio
n.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.26 |
axsFlowFilterOutLowerLengthThe lower limit of IP user data length on detection conditio
n.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.27 |
axsFlowFilterOutFragmentsIndicates whether 2nd fragment packet or later are included
in detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.28 |
axsFlowFilterOutSrcPortOpIndicates specification method of source port number on dete
ction condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.29 |
axsFlowFilterOutSrcPortIndicates source port number on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.30 |
axsFlowFilterOutSrcPortRangeSource port number in range specified by detection condition
.(maximum port number)ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.31 |
axsFlowFilterOutDestPortOpIndicates specification method of destination port number on
detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.32 |
axsFlowFilterOutDestPortIndicates destination port number on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.33 |
axsFlowFilterOutDestPortRangedestination port number in range specified by detection cond
ition.(maximum port number)ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.34 |
axsFlowFilterOutAckFlagIndicates whether TCP one-way communication permission is in
cluded in detection condition or not.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.35 |
axsFlowFilterOutSynFlagIndicates whether virtual circuit link-up permission is incl
uded in detection condition or not.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.36 |
axsFlowFilterOutIcmpTypeIndicates ICMP or ICMPv6 type on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.37 |
axsFlowFilterOutIcmpCodeIndicates ICMP or ICMPv6 code on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.38 |
axsFlowFilterOutIgmpTypeIndicates IGMP type on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.2.1.39 |
axsFlowFilterInActTableInformation of action parameter table on flow filter detecti
on condition.(Inbound) SEQUENCE OF AxsFlowFilterInActEntry .1.3.6.1.4.1.21839.2.2.1.8.3.3 |
axsFlowFilterInActEntryEntry of action parameter on flow filter detection condition
.(Inbound) AxsFlowFilterInActEntry .1.3.6.1.4.1.21839.2.2.1.8.3.3.1 |
axsFlowFilterInActifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.3.1.1 |
axsFlowFilterInActifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.3.1.2 |
axsFlowFilterInActListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.3.1.3 |
axsFlowFilterInActInfoInformation of action parameter on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.3.1.4 |
axsFlowFilterOutActTableInformation of action parameter table on flow filter detecti
on condition.(Outbound) SEQUENCE OF AxsFlowFilterOutActEntry .1.3.6.1.4.1.21839.2.2.1.8.3.4 |
axsFlowFilterOutActEntryEntry of action parameter on flow filter detection condition
.(Outbound) AxsFlowFilterOutActEntry .1.3.6.1.4.1.21839.2.2.1.8.3.4.1 |
axsFlowFilterOutActifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.4.1.1 |
axsFlowFilterOutActifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.4.1.2 |
axsFlowFilterOutActListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.4.1.3 |
axsFlowFilterOutActInfoInformation of action parameter on detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.3.4.1.4 |
axsFlowFilterStats OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.8.4 |
axsFlowFilterStatsInTableInformation of statistics table of per action parameter on f
low filter detection condition.(Inbound) SEQUENCE OF AxsFlowFilterStatsInEntry .1.3.6.1.4.1.21839.2.2.1.8.4.1 |
axsFlowFilterStatsInEntryEntry of statistics information of each action parameter on
flow filter detection condition.(Inbound) AxsFlowFilterStatsInEntry .1.3.6.1.4.1.21839.2.2.1.8.4.1.1 |
axsFlowFilterStatsInifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.4.1.1.1 |
axsFlowFilterStatsInifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.4.1.1.2 |
axsFlowFilterStatsInListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.4.1.1.3 |
axsFlowFilterStatsInDropPacketsThe number of packets which were matched with detection cond
ition and were discarded.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.4.1.1.4 |
axsFlowFilterStatsInForwardPacketsThe number of packets which were matched with detection cond
ition and were forwarded.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.4.1.1.5 |
axsFlowFilterStatsInPolicyRoutedPacketsThe number of packets which were matched with detection cond
ition and were policy routed.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.4.1.1.6 |
axsFlowFilterStatsOutTableInformation of statistics table of per action parameter on f
low filter detection condition.(Outbound) SEQUENCE OF AxsFlowFilterStatsOutEntry .1.3.6.1.4.1.21839.2.2.1.8.4.2 |
axsFlowFilterStatsOutEntryEntry of statistics information of each action parameter on
flow filter detection condition.(Outbound) AxsFlowFilterStatsOutEntry .1.3.6.1.4.1.21839.2.2.1.8.4.2.1 |
axsFlowFilterStatsOutifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.4.2.1.1 |
axsFlowFilterStatsOutifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.4.2.1.2 |
axsFlowFilterStatsOutListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.4.2.1.3 |
axsFlowFilterStatsOutDropPacketsThe number of packets which were matched with detection cond
ition and were discarded.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.4.2.1.4 |
axsFlowFilterStatsOutForwardPacketsThe number of packets which were matched with detection cond
ition and were forwarded.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.4.2.1.5 |
axsFlowQos OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.8.5 |
axsFlowQosInTableInformation of normal flow QoS detection condition table.(I
nbound) SEQUENCE OF AxsFlowQosInEntry .1.3.6.1.4.1.21839.2.2.1.8.5.1 |
axsFlowQosInEntryEntry of normal flow QoS detection condition. AxsFlowQosInEntry .1.3.6.1.4.1.21839.2.2.1.8.5.1.1 |
axsFlowQosInifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.1 |
axsFlowQosInifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2(2)fixed. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.2 |
axsFlowQosInListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.3 |
axsFlowQosInSrcMacOpIndicates specification method of source MAC address on norm
al flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.4 |
axsFlowQosInSrcMacIndicates source MAC address on normal flow detection condi
tion.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.5 |
axsFlowQosInSrcMacMaskIndicates mask of source MAC address on normal flow detecti
on specification.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.6 |
axsFlowQosInDestMacOpIndicates specification method of destination MAC address on
normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.7 |
axsFlowQosInDestMacIndicates destination MAC address on normal flow detection
condition.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.8 |
axsFlowQosInDestMacMaskIndicates mask of destination MAC address on normal flow de
tection specification.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.9 |
axsFlowQosInEthernetTypeIndicates type of ethernet V2 and IEEE802.3 SNAP/RFC1042 for
m on normal flow detection condition.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.10 |
axsFlowQosInUserPriorityIndicates user priority in Tag-VLAN on normal detection con
dition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.11 |
axsFlowQosInLowerVlanListBit map representation of VLAN ID on normal flow detection
condition.(Head 1 bit indicates existence of untagged definit
ion, and the rest effective or non-effective of VLAN 1-2047.)ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.12 |
axsFlowQosInHigherVlanListBit map representation of VLAN ID on normal flow detection
condition.(Each bit indicates whether VLAN 2048-4095 is effec
tive or non-effective in order.)ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.13 |
axsFlowQosInProtocolNumberIndicates upper protocol number on normal flow detection co
ndition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.14 |
axsFlowQosInIpAddrTypeIndicates IP address type which is shown.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.15 |
axsFlowQosInSrcIpOpIndicates specification method of source IP address on norma
l flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.16 |
axsFlowQosInSrcIpIndicates source IP address on normal flow detection condit
ion.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.17 |
axsFlowQosInSrcIpLengthIndicates subnet mask length(ipv4) or prefix length(ipv6) of
source IP address on normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.18 |
axsFlowQosInSrcIpRangeSource IP address in range specified by normal flow detecti
on condition.(maximum IP address)ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.19 |
axsFlowQosInDestIpOpIndicates specification method of destination IP address on
normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.20 |
axsFlowQosInDestIpIndicates destination IP address on normal flow detection c
ondition.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.21 |
axsFlowQosInDestIpLengthIndicates subnet mask length(ipv4) or prefix length(ipv6) of
destination IP address on normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.22 |
axsFlowQosInDestIpRangeDestination IP address in range specified by normal flow de
tection condition.(maximum IP address)ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.23 |
axsFlowQosInDscpThe value of DSCP on normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.24 |
axsFlowQosInPrecedenceThe value of precedence on normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.25 |
axsFlowQosInUpperLengthThe upper limit of IP user data length on normal flow detec
tion condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.26 |
axsFlowQosInLowerLengthThe lower limit of IP user data length on normal flow detec
tion condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.27 |
axsFlowQosInFragmentsIndicates whether 2nd fragment packet or later are included
in normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.28 |
axsFlowQosInSrcPortOpIndicates specification method of source port number on norm
al flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.29 |
axsFlowQosInSrcPortIndicates source port number on normal flow detection condi
tion.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.30 |
axsFlowQosInSrcPortRangeSource port number in range specified by normal flow detect
ion condition.(maximum port number)ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.31 |
axsFlowQosInDestPortOpIndicates specification method of destination port number on
normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.32 |
axsFlowQosInDestPortIndicates destination port number on normal flow detection
condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.33 |
axsFlowQosInDestPortRangedestination port number in range specified by normal flow d
etection condition.(maximum port number)ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.34 |
axsFlowQosInAckFlagIndicates whether TCP one-way communication permission is in
cluded in normal flow detection condition or not.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.35 |
axsFlowQosInSynFlagIndicates whether virtual circuit link-up permission is incl
uded in normal flow detection condition or not.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.36 |
axsFlowQosInIcmpTypeIndicates ICMP or ICMPv6 type on normal flow detection cond
ition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.37 |
axsFlowQosInIcmpCodeIndicates ICMP or ICMPv6 code on normal flow detection cond
ition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.38 |
axsFlowQosInIgmpTypeIndicates IGMP type on normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.1.1.39 |
axsFlowQosInPremTableInformation of premium flow QoS detection condition table.(I
nbound) SEQUENCE OF AxsFlowQosInPremEntry .1.3.6.1.4.1.21839.2.2.1.8.5.2 |
axsFlowQosInPremEntryEntry of premium flow QoS detection condition. AxsFlowQosInPremEntry .1.3.6.1.4.1.21839.2.2.1.8.5.2.1 |
axsFlowQosInPremifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.1 |
axsFlowQosInPremifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2(2)fixed. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.2 |
axsFlowQosInPremListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.3 |
axsFlowQosInPremSrcMacOpIndicates specification method of source MAC address on prem
ium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.4 |
axsFlowQosInPremSrcMacIndicates source MAC address on premium flow detection condi
tion.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.5 |
axsFlowQosInPremSrcMacMaskIndicates mask of source MAC address on premium flow detecti
on specification.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.6 |
axsFlowQosInPremDestMacOpIndicates specification method of destination MAC address on
premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.7 |
axsFlowQosInPremDestMacIndicates destination MAC address on premium flow detection
condition.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.8 |
axsFlowQosInPremDestMacMaskIndicates mask of destination MAC address on premium flow de
tection specification.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.9 |
axsFlowQosInPremEthernetTypeIndicates type of ethernet V2 and IEEE802.3 SNAP/RFC1042 for
m on premium flow detection condition.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.10 |
axsFlowQosInPremUserPriorityIndicates user priority in Tag-VLAN on premium flow detectio
n condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.11 |
axsFlowQosInPremLowerVlanListBit map representation of VLAN ID on premium flow detection
condition.(Head 1 bit indicates existence of untagged definit
ion, and the rest effective or non-effective of VLAN 1-2047.)ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.12 |
axsFlowQosInPremHigherVlanListBit map representation of VLAN ID on premium flow detection
condition.(Each bit indicates whether VLAN 2048-4095 is effec
tive or non-effective in order.)ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.13 |
axsFlowQosInPremProtocolNumberIndicates upper protocol number on premium flow detection co
ndition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.14 |
axsFlowQosInPremIpAddrTypeShown IP address type.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.15 |
axsFlowQosInPremSrcIpOpIndicates specification method of source IP address on premi
um flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.16 |
axsFlowQosInPremSrcIpIndicates source IP address on premium flow detection condit
ion.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.17 |
axsFlowQosInPremSrcIpLengthIndicates subnet mask length(ipv4) or prefix length(ipv6) of
source IP address on premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.18 |
axsFlowQosInPremSrcIpRangeSource IP address in range specified by premium flow detecti
on condition.(maximum IP address)ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.19 |
axsFlowQosInPremDestIpOpIndicates specification method of destination IP address on
premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.20 |
axsFlowQosInPremDestIpIndicates destination IP address on premium flow detection c
ondition.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.21 |
axsFlowQosInPremDestIpLengthIndicates subnet mask length(ipv4) or prefix length(ipv6) of
destination IP address on premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.22 |
axsFlowQosInPremDestIpRangeDestination IP address in range specified by premium flow de
tection condition.(maximum IP address)ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.23 |
axsFlowQosInPremDscpThe value of DSCP on premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.24 |
axsFlowQosInPremPrecedenceThe value of precedence on premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.25 |
axsFlowQosInPremUpperLengthThe upper limit of IP user data length on premium flow detec
tion condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.26 |
axsFlowQosInPremLowerLengthThe lower limit of IP user data length on premium flow detec
tion condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.27 |
axsFlowQosInPremFragmentsIndicates whether 2nd fragment packet or later are included
in premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.28 |
axsFlowQosInPremSrcPortOpIndicates specification method of source port number on prem
ium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.29 |
axsFlowQosInPremSrcPortIndicates source port number on premium flow detection condi
tion.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.30 |
axsFlowQosInPremSrcPortRangeSource port number in range specified by premium flow detect
ion condition.(maximum port number)ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.31 |
axsFlowQosInPremDestPortOpIndicates specification method of destination port number on
premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.32 |
axsFlowQosInPremDestPortIndicates destination port number on premium flow detection
condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.33 |
axsFlowQosInPremDestPortRangedestination port number in range specified by premium flow d
etection condition.(maximum port number)ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.34 |
axsFlowQosInPremAckFlagIndicates whether TCP one-way communication permission is in
cluded in premium flow detection condition or not.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.35 |
axsFlowQosInPremSynFlagIndicates whether virtual circuit link-up permission is incl
uded in premium flow detection condition or not.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.36 |
axsFlowQosInPremIcmpTypeIndicates ICMP or ICMPv6 type on premium flow detection cond
ition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.37 |
axsFlowQosInPremIcmpCodeIndicates ICMP or ICMPv6 code on premium flow detection cond
ition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.38 |
axsFlowQosInPremIgmpTypeIndicates IGMP type on premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.2.1.39 |
axsFlowQosOutTableInformation of normal flow QoS detection condition table.(O
utbound) SEQUENCE OF AxsFlowQosOutEntry .1.3.6.1.4.1.21839.2.2.1.8.5.3 |
axsFlowQosOutEntryEntry of normal flow QoS detection condition. AxsFlowQosOutEntry .1.3.6.1.4.1.21839.2.2.1.8.5.3.1 |
axsFlowQosOutifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.1 |
axsFlowQosOutifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2(2)fixed. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.2 |
axsFlowQosOutListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.3 |
axsFlowQosOutSrcMacOpIndicates specification method of source MAC address on norm
al flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.4 |
axsFlowQosOutSrcMacIndicates source MAC address on normal flow detection condi
tion.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.5 |
axsFlowQosOutSrcMacMaskIndicates mask of source MAC address on normal flow detecti
on specification.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.6 |
axsFlowQosOutDestMacOpIndicates specification method of destination MAC address on
normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.7 |
axsFlowQosOutDestMacIndicates destination MAC address on normal flow detection
condition.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.8 |
axsFlowQosOutDestMacMaskIndicates mask of destination MAC address on normal flow de
tection specification.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.9 |
axsFlowQosOutEthernetTypeIndicates type of ethernet V2 and IEEE802.3 SNAP/RFC1042 for
m on normal flow detection condition.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.10 |
axsFlowQosOutUserPriorityIndicates user priority in Tag-VLAN on normal detection con
dition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.11 |
axsFlowQosOutLowerVlanListBit map representation of VLAN ID on normal flow detection
condition.(Head 1 bit indicates existence of untagged definit
ion, and the rest effective or non-effective of VLAN 1-2047.)ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.12 |
axsFlowQosOutHigherVlanListBit map representation of VLAN ID on normal flow detection
condition.(Each bit indicates whether VLAN 2048-4095 is effec
tive or non-effective in order.)ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.13 |
axsFlowQosOutProtocolNumberIndicates upper protocol number on normal flow detection co
ndition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.14 |
axsFlowQosOutIpAddrTypeIndicates IP address type which is shown.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.15 |
axsFlowQosOutSrcIpOpIndicates specification method of source IP address on norma
l flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.16 |
axsFlowQosOutSrcIpIndicates source IP address on normal flow detection condit
ion.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.17 |
axsFlowQosOutSrcIpLengthIndicates subnet mask length(ipv4) or prefix length(ipv6) of
source IP address on normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.18 |
axsFlowQosOutSrcIpRangeSource IP address in range specified by normal flow detecti
on condition.(maximum IP address)ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.19 |
axsFlowQosOutDestIpOpIndicates specification method of destination IP address on
normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.20 |
axsFlowQosOutDestIpIndicates destination IP address on normal flow detection c
ondition.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.21 |
axsFlowQosOutDestIpLengthIndicates subnet mask length(ipv4) or prefix length(ipv6) of
destination IP address on normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.22 |
axsFlowQosOutDestIpRangeDestination IP address in range specified by normal flow de
tection condition.(maximum IP address)ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.23 |
axsFlowQosOutDscpThe value of DSCP on normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.24 |
axsFlowQosOutPrecedenceThe value of precedence on normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.25 |
axsFlowQosOutUpperLengthThe upper limit of IP user data length on normal flow detec
tion condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.26 |
axsFlowQosOutLowerLengthThe lower limit of IP user data length on normal flow detec
tion condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.27 |
axsFlowQosOutFragmentsIndicates whether 2nd fragment packet or later are included
in normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.28 |
axsFlowQosOutSrcPortOpIndicates specification method of source port number on norm
al flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.29 |
axsFlowQosOutSrcPortIndicates source port number on normal flow detection condi
tion.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.30 |
axsFlowQosOutSrcPortRangeSource port number in range specified by normal flow detect
ion condition.(maximum port number)ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.31 |
axsFlowQosOutDestPortOpIndicates specification method of destination port number on
normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.32 |
axsFlowQosOutDestPortIndicates destination port number on normal flow detection
condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.33 |
axsFlowQosOutDestPortRangedestination port number in range specified by normal flow d
etection condition.(maximum port number)ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.34 |
axsFlowQosOutAckFlagIndicates whether TCP one-way communication permission is in
cluded in normal flow detection condition or not.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.35 |
axsFlowQosOutSynFlagIndicates whether virtual circuit link-up permission is incl
uded in normal flow detection condition or not.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.36 |
axsFlowQosOutIcmpTypeIndicates ICMP or ICMPv6 type on normal flow detection cond
ition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.37 |
axsFlowQosOutIcmpCodeIndicates ICMP or ICMPv6 code on normal flow detection cond
ition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.38 |
axsFlowQosOutIgmpTypeIndicates IGMP type on normal flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.3.1.39 |
axsFlowQosOutPremTableInformation of premium flow QoS detection condition table.(O
utbound) SEQUENCE OF AxsFlowQosOutPremEntry .1.3.6.1.4.1.21839.2.2.1.8.5.4 |
axsFlowQosOutPremEntryEntry of premium flow QoS detection condition. AxsFlowQosOutPremEntry .1.3.6.1.4.1.21839.2.2.1.8.5.4.1 |
axsFlowQosOutPremifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.1 |
axsFlowQosOutPremifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2(2)fixed. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.2 |
axsFlowQosOutPremListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.3 |
axsFlowQosOutPremSrcMacOpIndicates specification method of source MAC address on prem
ium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.4 |
axsFlowQosOutPremSrcMacIndicates source MAC address on premium flow detection condi
tion.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.5 |
axsFlowQosOutPremSrcMacMaskIndicates mask of source MAC address on premium flow detecti
on specification.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.6 |
axsFlowQosOutPremDestMacOpIndicates specification method of destination MAC address on
premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.7 |
axsFlowQosOutPremDestMacIndicates destination MAC address on premium flow detection
condition.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.8 |
axsFlowQosOutPremDestMacMaskIndicates mask of destination MAC address on premium flow de
tection specification.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.9 |
axsFlowQosOutPremEthernetTypeIndicates type of ethernet V2 and IEEE802.3 SNAP/RFC1042 for
m on premium flow detection condition.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.10 |
axsFlowQosOutPremUserPriorityIndicates user priority in Tag-VLAN on premium flow detectio
n condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.11 |
axsFlowQosOutPremLowerVlanListBit map representation of VLAN ID on premium flow detection
condition.(Head 1 bit indicates existence of untagged definit
ion, and the rest effective or non-effective of VLAN 1-2047.)ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.12 |
axsFlowQosOutPremHigherVlanListBit map representation of VLAN ID on premium flow detection
condition.(Each bit indicates whether VLAN 2048-4095 is effec
tive or non-effective in order.)ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.13 |
axsFlowQosOutPremProtocolNumberIndicates upper protocol number on premium flow detection co
ndition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.14 |
axsFlowQosOutPremIpAddrTypeShown IP address type.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.15 |
axsFlowQosOutPremSrcIpOpIndicates specification method of source IP address on premi
um flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.16 |
axsFlowQosOutPremSrcIpIndicates source IP address on premium flow detection condit
ion.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.17 |
axsFlowQosOutPremSrcIpLengthIndicates subnet mask length(ipv4) or prefix length(ipv6) of
source IP address on premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.18 |
axsFlowQosOutPremSrcIpRangeSource IP address in range specified by premium flow detecti
on condition.(maximum IP address)ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.19 |
axsFlowQosOutPremDestIpOpIndicates specification method of destination IP address on
premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.20 |
axsFlowQosOutPremDestIpIndicates destination IP address on premium flow detection c
ondition.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.21 |
axsFlowQosOutPremDestIpLengthIndicates subnet mask length(ipv4) or prefix length(ipv6) of
destination IP address on premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.22 |
axsFlowQosOutPremDestIpRangeDestination IP address in range specified by premium flow de
tection condition.(maximum IP address)ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.23 |
axsFlowQosOutPremDscpThe value of DSCP on premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.24 |
axsFlowQosOutPremPrecedenceThe value of precedence on premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.25 |
axsFlowQosOutPremUpperLengthThe upper limit of IP user data length on premium flow detec
tion condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.26 |
axsFlowQosOutPremLowerLengthThe lower limit of IP user data length on premium flow detec
tion condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.27 |
axsFlowQosOutPremFragmentsIndicates whether 2nd fragment packet or later are included
in premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.28 |
axsFlowQosOutPremSrcPortOpIndicates specification method of source port number on prem
ium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.29 |
axsFlowQosOutPremSrcPortIndicates source port number on premium flow detection condi
tion.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.30 |
axsFlowQosOutPremSrcPortRangeSource port number in range specified by premium flow detect
ion condition.(maximum port number)ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.31 |
axsFlowQosOutPremDestPortOpIndicates specification method of destination port number on
premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.32 |
axsFlowQosOutPremDestPortIndicates destination port number on premium flow detection
condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.33 |
axsFlowQosOutPremDestPortRangedestination port number in range specified by premium flow d
etection condition.(maximum port number)ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.34 |
axsFlowQosOutPremAckFlagIndicates whether TCP one-way communication permission is in
cluded in premium flow detection condition or not.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.35 |
axsFlowQosOutPremSynFlagIndicates whether virtual circuit link-up permission is incl
uded in premium flow detection condition or not.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.36 |
axsFlowQosOutPremIcmpTypeIndicates ICMP or ICMPv6 type on premium flow detection cond
ition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.37 |
axsFlowQosOutPremIcmpCodeIndicates ICMP or ICMPv6 code on premium flow detection cond
ition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.38 |
axsFlowQosOutPremIgmpTypeIndicates IGMP type on premium flow detection condition.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.4.1.39 |
axsFlowQosInActTableInformation of action parameter table on normal flow detect
ion condition.(Inbound) SEQUENCE OF AxsFlowQosInActEntry .1.3.6.1.4.1.21839.2.2.1.8.5.5 |
axsFlowQosInActEntryEntry of action parameter on normal flow detection conditio
n.(Inbound) AxsFlowQosInActEntry .1.3.6.1.4.1.21839.2.2.1.8.5.5.1 |
axsFlowQosInActifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.1 |
axsFlowQosInActifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.2 |
axsFlowQosInActListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.3 |
axsFlowQosInActMaxRateThe value of monitoring bandwidth under maximum bandwidth co
ntrol.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.4 |
axsFlowQosInActMaxRateBurstBurst size under maximum bandwidth control.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.5 |
axsFlowQosInActMaxUpcRedMinBurstMinimum burst size while using UPC-RED(Max) function.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.6 |
axsFlowQosInActMaxUpcRedMaxBurstMaximum burst size while using UPC-RED(Max) function.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.7 |
axsFlowQosInActMaxUpcRedProbabilityMaximum violation rate while using UPC-RED(Max) function.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.8 |
axsFlowQosInActMinRateThe value of monitoring bandwidth under minimum bandwidth co
ntrol.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.9 |
axsFlowQosInActMinRateBurstBurst size under minimum bandwidth control.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.10 |
axsFlowQosInActMinUpcRedMinBurstMinimum burst size while using UPC-RED(Min) function.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.11 |
axsFlowQosInActMinUpcRedMaxBurstMaximum burst size while using UPC-RED(Min) function.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.12 |
axsFlowQosInActMinUpcRedProbabilityMaximum violation rate while using UPC-RED(Min) function.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.13 |
axsFlowQosInActAgQueueOpIndicates specification method of aggregate queue number of
layered shaper.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.14 |
axsFlowQosInActAgQueueAggregate queue number of layered shaper.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.15 |
axsFlowQosInActPriorityOutput priority when bandwidth monitoring function is not us
ed.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.16 |
axsFlowQosInActMaxUnderPriorityOutput priority of packets which complied with maximum contr
act bandwidth when maximum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.17 |
axsFlowQosInActMinOverPriorityOutput priority of packets which violated minimum contract b
andwidth when minimum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.18 |
axsFlowQosInActMinUnderPriorityOutput priority of packets which complied with minimum contr
act bandwidth when minimum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.19 |
axsFlowQosInActDiscardQueuing priority when bandwidth monitoring function is not b
eing used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.20 |
axsFlowQosInActMaxUnderDiscardQueuing priority of packets which complied with maximum cont
ract bandwidth when maximum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.21 |
axsFlowQosInActMinOverDiscardQueuing priority of packets which violated minimum contract
bandwidth when minimum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.22 |
axsFlowQosInActMinUnderDiscardQueuing priority of packets which complied with minimum cont
ract bandwidth when minimum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.23 |
axsFlowQosInActDscpOpIndicates existence of DSCP mapping specification.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.24 |
axsFlowQosInActDscpThe value of DSCP when bandwidth monitoring function is not
being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.25 |
axsFlowQosInActMaxUnderDscpThe value of DSCP of packets which complied with maximum con
tract bandwidth when maximum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.26 |
axsFlowQosInActMinOverDscpThe value of DSCP of packets which violated minimum contract
bandwidth when minimum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.27 |
axsFlowQosInActMinUnderDscpThe value of DSCP of packets which complied with minimum con
tract bandwidth when minimum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.28 |
axsFlowQosInActUserPriorityIndicates user priority when bandwidth monitoring function i
s not being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.29 |
axsFlowQosInActMaxUnderUserPriorityUser priority of packets which complied with maximum contrac
t bandwidth when maximum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.30 |
axsFlowQosInActMinOverUserPriorityUser priority of packets which violated minimum contract ban
dwidth when minimum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.31 |
axsFlowQosInActMinUnderUserPriorityUser priority of packets which complied with minimum contrac
t bandwidth when minimum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.5.1.32 |
axsFlowQosInActPremTableInformation of action parameter table on premium flow detect
ion condition.(Inbound) SEQUENCE OF AxsFlowQosInActPremEntry .1.3.6.1.4.1.21839.2.2.1.8.5.6 |
axsFlowQosInActPremEntryEntry of action parameter on premium flow detection conditio
n.(Inbound) AxsFlowQosInActPremEntry .1.3.6.1.4.1.21839.2.2.1.8.5.6.1 |
axsFlowQosInActPremifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.6.1.1 |
axsFlowQosInActPremifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.6.1.2 |
axsFlowQosInActPremListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.6.1.3 |
axsFlowQosInActPremMaxRateBurstBurst size of premium flow under maximum bandwidth control.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.6.1.4 |
axsFlowQosInActPremMinRateBurstBurst size of premium flow under minimum bandwidth control.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.6.1.5 |
axsFlowQosOutActTableInformation of action parameter table on normal flow detect
ion condition.(Outbound) SEQUENCE OF AxsFlowQosOutActEntry .1.3.6.1.4.1.21839.2.2.1.8.5.7 |
axsFlowQosOutActEntryEntry of action parameter on normal flow detection conditio
n.(Outbound) AxsFlowQosOutActEntry .1.3.6.1.4.1.21839.2.2.1.8.5.7.1 |
axsFlowQosOutActifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.1 |
axsFlowQosOutActifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.2 |
axsFlowQosOutActListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.3 |
axsFlowQosOutActMaxRateThe value of monitoring bandwidth under maximum bandwidth co
ntrol.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.4 |
axsFlowQosOutActMaxRateBurstBurst size under maximum bandwidth control.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.5 |
axsFlowQosOutActMaxUpcRedMinBurstMinimum burst size while using UPC-RED(Max) function.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.6 |
axsFlowQosOutActMaxUpcRedMaxBurstMaximum burst size while using UPC-RED(Max) function.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.7 |
axsFlowQosOutActMaxUpcRedProbabilityMaximum violation rate while using UPC-RED(Max) function.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.8 |
axsFlowQosOutActMinRateThe value of monitoring bandwidth under minimum bandwidth co
ntrol.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.9 |
axsFlowQosOutActMinRateBurstBurst size under minimum bandwidth control.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.10 |
axsFlowQosOutActMinUpcRedMinBurstMinimum burst size while using UPC-RED(Min) function.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.11 |
axsFlowQosOutActMinUpcRedMaxBurstMaximum burst size while using UPC-RED(Min) function.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.12 |
axsFlowQosOutActMinUpcRedProbabilityMaximum violation rate while using UPC-RED(Min) function.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.13 |
axsFlowQosOutActAgQueueOpIndicates specification method of aggregate queue number of
layered shaper.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.14 |
axsFlowQosOutActAgQueueAggregate queue number of layered shaper.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.15 |
axsFlowQosOutActPriorityOutput priority when bandwidth monitoring function is not us
ed.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.16 |
axsFlowQosOutActMaxUnderPriorityOutput priority of packets which complied with maximum contr
act bandwidth when maximum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.17 |
axsFlowQosOutActMinOverPriorityOutput priority of packets which violated minimum contract b
andwidth when minimum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.18 |
axsFlowQosOutActMinUnderPriorityOutput priority of packets which complied with minimum contr
act bandwidth when minimum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.19 |
axsFlowQosOutActDiscardQueuing priority when bandwidth monitoring function is not b
eing used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.20 |
axsFlowQosOutActMaxUnderDiscardQueuing priority of packets which complied with maximum cont
ract bandwidth when maximum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.21 |
axsFlowQosOutActMinOverDiscardQueuing priority of packets which violated minimum contract
bandwidth when minimum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.22 |
axsFlowQosOutActMinUnderDiscardQueuing priority of packets which complied with minimum cont
ract bandwidth when minimum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.23 |
axsFlowQosOutActDscpOpIndicates existence of DSCP mapping specification.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.24 |
axsFlowQosOutActDscpThe value of DSCP when bandwidth monitoring function is not
being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.25 |
axsFlowQosOutActMaxUnderDscpThe value of DSCP of packets which complied with maximum con
tract bandwidth when maximum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.26 |
axsFlowQosOutActMinOverDscpThe value of DSCP of packets which violated minimum contract
bandwidth when minimum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.27 |
axsFlowQosOutActMinUnderDscpThe value of DSCP of packets which complied with minimum con
tract bandwidth when minimum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.28 |
axsFlowQosOutActUserPriorityIndicates user priority when bandwidth monitoring function i
s not being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.29 |
axsFlowQosOutActMaxUnderUserPriorityUser priority of packets which complied with maximum contrac
t bandwidth when maximum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.30 |
axsFlowQosOutActMinOverUserPriorityUser priority of packets which violated minimum contract ban
dwidth when minimum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.31 |
axsFlowQosOutActMinUnderUserPriorityUser priority of packets which complied with minimum contrac
t bandwidth when minimum bandwidth control is being used.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.7.1.32 |
axsFlowQosOutActPremTableInformation of action parameter table on premium flow detect
ion condition.(Outbound) SEQUENCE OF AxsFlowQosOutActPremEntry .1.3.6.1.4.1.21839.2.2.1.8.5.8 |
axsFlowQosOutActPremEntryEntry of action parameter on premium flow detection conditio
n.(Outbound) AxsFlowQosOutActPremEntry .1.3.6.1.4.1.21839.2.2.1.8.5.8.1 |
axsFlowQosOutActPremifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.8.1.1 |
axsFlowQosOutActPremifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.8.1.2 |
axsFlowQosOutActPremListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.8.1.3 |
axsFlowQosOutActPremMaxRateBurstBurst size of premium flow under maximum bandwidth control.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.8.1.4 |
axsFlowQosOutActPremMinRateBurstBurst size of premium flow under minimum bandwidth control.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.8.5.8.1.5 |
axsFlowQosStats OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.8.6 |
axsFlowQosStatsInTableInformation of statistics table which matched normal flow de
tection condition. SEQUENCE OF AxsFlowQosStatsInEntry .1.3.6.1.4.1.21839.2.2.1.8.6.1 |
axsFlowQosStatsInEntryEntry of statistics information which matched normal flow de
tection condition. AxsFlowQosStatsInEntry .1.3.6.1.4.1.21839.2.2.1.8.6.1.1 |
axsFlowQosStatsInifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.6.1.1.1 |
axsFlowQosStatsInifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.6.1.1.2 |
axsFlowQosStatsInListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.6.1.1.3 |
axsFlowQosStatsInHitPacketsThe number of packets which matched normal flow detection co
ndition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.1.1.4 |
axsFlowQosStatsInMaxOverPacketsThe number of packets which violated maximum contract bandwi
dth and matched normal flow detection condition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.1.1.5 |
axsFlowQosStatsInMaxUnderPacketsThe number of packets which complied with maximum contract b
andwidth and matched normal flow detection condition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.1.1.6 |
axsFlowQosStatsInMinOverPacketsThe number of packets which violated minimum contract bandwi
dth and matched normal flow detection condition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.1.1.7 |
axsFlowQosStatsInMinUnderPacketsThe number of packets which complied with minimum contract b
andwidth and matched normal flow detection condition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.1.1.8 |
axsFlowQosStatsInPremTableInformation of statistics table which matched premium flow d
etection condition. SEQUENCE OF AxsFlowQosStatsInPremEntry .1.3.6.1.4.1.21839.2.2.1.8.6.2 |
axsFlowQosStatsInPremEntryEntry of statistics information which matched premium flow d
etection condition. AxsFlowQosStatsInPremEntry .1.3.6.1.4.1.21839.2.2.1.8.6.2.1 |
axsFlowQosStatsInPremifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.6.2.1.1 |
axsFlowQosStatsInPremifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.6.2.1.2 |
axsFlowQosStatsInPremListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.6.2.1.3 |
axsFlowQosStatsInPremMaxOverPacketsThe number of packets which violated maximum contract bandwi
dth and matched premium flow detection condition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.2.1.4 |
axsFlowQosStatsInPremMaxUnderPacketsThe number of packets which complied with maximum contract b
andwidth and matched premium flow detection condition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.2.1.5 |
axsFlowQosStatsInPremMinOverPacketsThe number of packets which violated minimum contract bandwi
dth and matched premium flow detection condition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.2.1.6 |
axsFlowQosStatsInPremMinUnderPacketsThe number of packets which complied with minimum contract b
andwidth and matched premium flow detection condition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.2.1.7 |
axsFlowQosStatsOutTableInformation of statistics table which matched normal flow de
tection condition. SEQUENCE OF AxsFlowQosStatsOutEntry .1.3.6.1.4.1.21839.2.2.1.8.6.3 |
axsFlowQosStatsOutEntryEntry of statistics information which matched normal flow de
tection condition. AxsFlowQosStatsOutEntry .1.3.6.1.4.1.21839.2.2.1.8.6.3.1 |
axsFlowQosStatsOutifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.6.3.1.1 |
axsFlowQosStatsOutifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.6.3.1.2 |
axsFlowQosStatsOutListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.6.3.1.3 |
axsFlowQosStatsOutHitPacketsThe number of packets which matched normal flow detection co
ndition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.3.1.4 |
axsFlowQosStatsOutMaxOverPacketsThe number of packets which violated maximum contract bandwi
dth and matched normal flow detection condition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.3.1.5 |
axsFlowQosStatsOutMaxUnderPacketsThe number of packets which complied with maximum contract b
andwidth and matched normal flow detection condition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.3.1.6 |
axsFlowQosStatsOutMinOverPacketsThe number of packets which violated minimum contract bandwi
dth and matched normal flow detection condition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.3.1.7 |
axsFlowQosStatsOutMinUnderPacketsThe number of packets which complied with minimum contract b
andwidth and matched normal flow detection condition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.3.1.8 |
axsFlowQosStatsOutPremTableInformation of statistics table which matched premium flow d
etection condition. SEQUENCE OF AxsFlowQosStatsOutPremEntry .1.3.6.1.4.1.21839.2.2.1.8.6.4 |
axsFlowQosStatsOutPremEntryEntry of statistics information which matched premium flow d
etection condition. AxsFlowQosStatsOutPremEntry .1.3.6.1.4.1.21839.2.2.1.8.6.4.1 |
axsFlowQosStatsOutPremifIndexIndicates the value of index(ifIndex) which identifies this
table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.6.4.1.1 |
axsFlowQosStatsOutPremifIndexTypeIndicates interface type.Physical port number : 1Interface n
ame : 2 INTEGER .1.3.6.1.4.1.21839.2.2.1.8.6.4.1.2 |
axsFlowQosStatsOutPremListNumberIndicates the value of index(list number) which identifies t
his table entry. INTEGER .1.3.6.1.4.1.21839.2.2.1.8.6.4.1.3 |
axsFlowQosStatsOutPremMaxOverPacketsThe number of packets which violated maximum contract bandwi
dth and matched premium flow detection condition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.4.1.4 |
axsFlowQosStatsOutPremMaxUnderPacketsThe number of packets which complied with maximum contract b
andwidth and matched premium flow detection condition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.4.1.5 |
axsFlowQosStatsOutPremMinOverPacketsThe number of packets which violated minimum contract bandwi
dth and matched premium flow detection condition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.4.1.6 |
axsFlowQosStatsOutPremMinUnderPacketsThe number of packets which complied with minimum contract b
andwidth and matched premium flow detection condition.ro Counter64 .1.3.6.1.4.1.21839.2.2.1.8.6.4.1.7 |
axsOspf OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.14 |
axsOspfGeneralTableThe table of OSPF information. SEQUENCE OF AxsOspfGeneralEntry .1.3.6.1.4.1.21839.2.2.1.14.1 |
axsOspfGeneralEntryThe entry of OSPF information. AxsOspfGeneralEntry .1.3.6.1.4.1.21839.2.2.1.14.1.1 |
axsOspfGeneralDomainNumberDomain number in the Autonomous System.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.1.1.1 |
axsOspfRouterIdA integer uniquely identifying the router
in the Autonomous System.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.1.1.2 |
axsOspfAdminStatThe administrative status of OSPF in the
router.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.1.1.3 |
axsOspfVersionNumberThe current version number of the OSPF
protocol is 2.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.1.1.4 |
axsOspfAreaBdrRtrStatusA flag to note whether this router is an area
border router.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.1.1.5 |
axsOspfASBdrRtrStatusA flag to note whether this router is configured
as an Autonomous System border router.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.1.1.6 |
axsOspfExternLsaCountThe number of external (LS type 5) link-state
advertisements in the link-state database.ro Gauge .1.3.6.1.4.1.21839.2.2.1.14.1.1.7 |
axsOspfExternLsaCksumSumThe 32-bit unsigned sum of the LS checksums of
the external link-state advertisements contained
in the link-state database.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.1.1.8 |
axsOspfTOSSupportThe router's support for type-of-service routing.
This value of false(2).ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.1.1.9 |
axsOspfOriginateNewLsasThe number of new link-state advertisements
that have been originated.ro Counter .1.3.6.1.4.1.21839.2.2.1.14.1.1.10 |
axsOspfRxNewLsasThe number of link-state advertisements received
determined to be new instantiations.ro Counter .1.3.6.1.4.1.21839.2.2.1.14.1.1.11 |
axsOspfExtLsdbLimitThe maximum number of non-default AS-external-LSAs
entries that can be stored in the link-state database.
If the value is -1, then there is no limit.
This value is -1ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.1.1.12 |
axsOspfMulticastExtensionsA Bit Mask indicating whether the router is
forwarding IP multicast (Class D) datagrams
based on the algorithms defined in the Multicast
Extensions to OSPF.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.1.1.13 |
axsOspfAreaTableThe router's support for demand routing. SEQUENCE OF AxsOspfAreaEntry .1.3.6.1.4.1.21839.2.2.1.14.2 |
axsOspfAreaEntryThis entry contain ospf area information. AxsOspfAreaEntry .1.3.6.1.4.1.21839.2.2.1.14.2.1 |
axsOspfAreaDomainNumberAn uniquely identifying number of domain.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.2.1.1 |
axsOspfAreaIdA 32-bit integer uniquely identifying an area.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.2.1.2 |
axsOspfAuthTypeThe authentication type specified for an area.ro INTEGER -- none(0), -- simplePassword (1), -- md5(2) .1.3.6.1.4.1.21839.2.2.1.14.2.1.3 |
axsOspfImportAsExternThe area's support for importing AS external
link- state advertisements.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.2.1.4 |
axsOspfSpfRunsThe number of times that the intra-area route
table has been calculated using this area's
link-state database.ro Counter .1.3.6.1.4.1.21839.2.2.1.14.2.1.5 |
axsOspfAreaBdrRtrCountThe total number of area border routers reachable
within this area.ro Gauge .1.3.6.1.4.1.21839.2.2.1.14.2.1.6 |
axsOspfAsBdrRtrCountThe total number of AS area border routers reachable
within this area.ro Gauge .1.3.6.1.4.1.21839.2.2.1.14.2.1.7 |
axsOspfAreaLsaCountThe total number of LSA(link-state advertisements)
in this area. Excluding AS External LSA'sro Gauge .1.3.6.1.4.1.21839.2.2.1.14.2.1.8 |
axsOspfAreaLsaCksumSumThe sum of LSA's LS checksums contained in this
area's link-state database.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.2.1.9 |
axsOspfAreaSummaryhe variable axsOspfAreaSummary controls the import
of summary LSAs into stub areas. Value is only
sendAreaSummary(2).ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.2.1.10 |
axsOspfAreaStatusThis variable displays the status of the entry.
Value is only valid(1).ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.2.1.11 |
axsOspfStubAreaTableThe set of metrics that will be advertised by
a default Area Border Router into a stub area. SEQUENCE OF AxsOspfStubAreaEntry .1.3.6.1.4.1.21839.2.2.1.14.3 |
axsOspfStubAreaEntryThe metric for a given Type of Service that
will be advertised by a default Area Border Router
into a stub area. AxsOspfStubAreaEntry .1.3.6.1.4.1.21839.2.2.1.14.3.1 |
axsOspfStubDomainNumberThe domain identifier for the Stub Area.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.3.1.1 |
axsOspfStubAreaIdThe identifier for the Stub Area.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.3.1.2 |
axsOspfStubTOSThe Type of Service associated with the metric.
Value is only 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.3.1.3 |
axsOspfStubMetricThe metric value applied at the indicated type
of service.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.3.1.4 |
axsOspfStubStatusThis variable displays the status of the entry.
This value is only valid(1).ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.3.1.5 |
axsOspfStubMetricTypehis variable displays the type of metric advertised
as a default route.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.3.1.6 |
axsOspfLsdbTableThe OSPF Process's Link State Database. SEQUENCE OF AxsOspfLsdbEntry .1.3.6.1.4.1.21839.2.2.1.14.4 |
axsOspfLsdbEntryA single Link State Advertisement. AxsOspfLsdbEntry .1.3.6.1.4.1.21839.2.2.1.14.4.1 |
axsOspfLsdbDomainNumberThe identifier of the domain from which
the LSA was received.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.4.1.1 |
axsOspfLsdbAreaIdThe 32 bit identifier of the Area from which
the LSA was received.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.4.1.2 |
axsOspfLsdbTypeThe type of the link state advertisement.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.4.1.3 |
axsOspfLsdbLsidThe Link State ID . It identifies the piece of the routing
domain that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.4.1.4 |
axsOspfLsdbRouterIdThe number that uniquely identifies the originating
router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.4.1.5 |
axsOspfLsdbSequenceThe sequence number field is a signed 32-bit
integer.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.4.1.6 |
axsOspfLsdbAgeThis the age of the link state adver-
tisement in seconds.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.4.1.7 |
axsOspfLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.4.1.8 |
axsOspfLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.14.4.1.9 |
axsOspfAreaRangeTableA range if IP addresses specified by an IP
address/IP network mask pair. SEQUENCE OF AxsOspfAreaRangeEntry .1.3.6.1.4.1.21839.2.2.1.14.5 |
axsOspfAreaRangeEntryA range if IP addresses specified by an IP
address/IP network mask pair. AxsOspfAreaRangeEntry .1.3.6.1.4.1.21839.2.2.1.14.5.1 |
axsOspfAreaRangeDomainNumberDomain number of the Area.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.5.1.1 |
axsOspfAreaRangeAreaIdThe Area the Address Range is to be found
within.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.5.1.2 |
axsOspfAreaRangeNetThe IP Address of the Net or Subnet indicated
by the range.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.5.1.3 |
axsOspfAreaRangeMaskThe Subnet Mask that pertains to the Net or
Subnet.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.5.1.4 |
axsOspfAreaRangeStatusThis variable displays the status of the entry.
This value is only valid(1).ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.5.1.5 |
axsOspfAreaRangeEffectSubnets subsumed by ranges either trigger the
advertisement of the indicated summary (adver-
tiseMatching), or result in the subnet's not
being advertised at all outside the area.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.5.1.6 |
axsOspfHostTableThe list of Hosts, and their metrics, that the
router will advertise as host routes. SEQUENCE OF AxsOspfHostEntry .1.3.6.1.4.1.21839.2.2.1.14.6 |
axsOspfHostEntryA metric to be advertised, for a given type of service,
when a given host is reachable. AxsOspfHostEntry .1.3.6.1.4.1.21839.2.2.1.14.6.1 |
axsOspfHostDomainNumberOSPF domain number of the Host.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.6.1.1 |
axsOspfHostIpAddressThe IP Address of the Host.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.6.1.2 |
axsOspfHostTOSThe Type of Service of the route being configured.
This value is only 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.6.1.3 |
axsOspfHostMetricThe Metric to be advertised.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.6.1.4 |
axsOspfHostStatusThis variable displays the status of the entry.
Setting it to 'invalid' has the effect of rendering
it inoperative. The internal effect (row removal) is
implementation dependent.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.6.1.5 |
axsOspfIfTableThe OSPF Interface Table describes the interfaces
from the viewpoint of OSPF. SEQUENCE OF AxsOspfIfEntry .1.3.6.1.4.1.21839.2.2.1.14.7 |
axsOspfIfEntryThe OSPF Interface Entry describes one interface
from the viewpoint of OSPF. AxsOspfIfEntry .1.3.6.1.4.1.21839.2.2.1.14.7.1 |
axsOspfIfDomainNumberThe domain number of this OSPF interface.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.7.1.1 |
axsOspfIfIpAddressThe IP address of this OSPF interface.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.7.1.2 |
axsOspfAddressLessIfFor the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces having no IP Address.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.7.1.3 |
axsOspfIfAreaIdA integer uniquely identifying the area to which
the interface connects.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.7.1.4 |
axsOspfIfTypeThe OSPF interface type.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.7.1.5 |
axsOspfIfAdminStatThe OSPF interface's administrative status.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.7.1.6 |
axsOspfIfRtrPriorityThe priority of this interface.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.7.1.7 |
axsOspfIfTransitDelayThe estimated number of seconds it takes to
transmit a link state update packet over this
interface.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.7.1.8 |
axsOspfIfRetransIntervalThe number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.7.1.9 |
axsOspfIfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the interface.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.7.1.10 |
axsOspfIfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before it's neighbors
declare the router down.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.7.1.11 |
axsOspfIfPollIntervalThe larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.7.1.12 |
axsOspfIfStateThe OSPF Interface State.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.7.1.13 |
axsOspfIfDesignatedRouterThe IP Address of the Designated Router.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.7.1.14 |
axsOspfIfBackupDesignatedRouterThe IP Address of the Backup Designated Router.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.7.1.15 |
axsOspfIfEventsThe number of times this OSPF interface has
changed its state, or an error has occurred.ro Counter .1.3.6.1.4.1.21839.2.2.1.14.7.1.16 |
axsOspfIfAuthKeyThe Authentication Key.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.14.7.1.17 |
axsOspfIfStatusThis variable displays the status of the entry.
this value is only valid(1).ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.7.1.18 |
axsOspfIfMulticastForwardingThe way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link unicasts.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.7.1.19 |
axsOspfIfMetricTableThe TOS metrics for a non-virtual interface identified
by the interface index. SEQUENCE OF AxsOspfIfMetricEntry .1.3.6.1.4.1.21839.2.2.1.14.8 |
axsOspfIfMetricEntryA particular TOS metric for a non-virtual interface
identified by the interface index. AxsOspfIfMetricEntry .1.3.6.1.4.1.21839.2.2.1.14.8.1 |
axsOspfIfMetricDomainNumberThe domain number of this OSPF interface.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.8.1.1 |
axsOspfIfMetricIpAddressThe IP address of this OSPF interface.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.8.1.2 |
axsOspfIfMetricAddressLessIfFor the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the value of ifIndex for in-
terfaces having no IP Address.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.8.1.3 |
axsOspfIfMetricTOSThe type of service metric being referenced.
this value is only 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.8.1.4 |
axsOspfIfMetricValueThe metric of using this type of service on
this interface.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.8.1.5 |
axsOspfIfMetricStatusThis variable displays the status of the entry.
This entry status is only valid(1).ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.8.1.6 |
axsOspfVirtIfTableInformation about this router's virtual interfaces. SEQUENCE OF AxsOspfVirtIfEntry .1.3.6.1.4.1.21839.2.2.1.14.9 |
axsOspfVirtIfEntryInformation about a single Virtual Interface. AxsOspfVirtIfEntry .1.3.6.1.4.1.21839.2.2.1.14.9.1 |
axsOspfVirtIfDomainNumberThe domain number for this Virtual Interfacero INTEGER .1.3.6.1.4.1.21839.2.2.1.14.9.1.1 |
axsOspfVirtIfAreaIdThe Transit Area that the Virtual Link traverses.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.9.1.2 |
axsOspfVirtIfNeighborThe Router ID of the Virtual Neighbor.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.9.1.3 |
axsOspfVirtIfTransitDelayThe estimated number of seconds it takes to
transmit a link- state update packet over this
interface.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.9.1.4 |
axsOspfVirtIfRetransIntervalThe number of seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.9.1.5 |
axsOspfVirtIfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the in-
terface.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.9.1.6 |
axsOspfVirtIfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before it's neighbors
declare the router down.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.9.1.7 |
axsOspfVirtIfStateOSPF virtual interface states.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.9.1.8 |
axsOspfVirtIfEventsThe number of state changes or error events on
this Virtual Linkro Counter .1.3.6.1.4.1.21839.2.2.1.14.9.1.9 |
axsOspfVirtIfAuthKeyAuthentication key of this interface.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.14.9.1.10 |
axsOspfVirtIfStatusThis variable displays the status of the entry.
This entry is only valid(1).ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.9.1.11 |
axsOspfNbrTableA table of non-virtual neighbor information. SEQUENCE OF AxsOspfNbrEntry .1.3.6.1.4.1.21839.2.2.1.14.10 |
axsOspfNbrEntryThe information regarding a single neighbor. AxsOspfNbrEntry .1.3.6.1.4.1.21839.2.2.1.14.10.1 |
axsOspfNbrDomainNumberOSPF domain number of this neighbor.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.10.1.1 |
axsOspfNbrIpAddrThe IP address this neighbor is using in its
IP Source Address.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.10.1.2 |
axsOspfNbrAddressLessIndexOn an interface having an IP Address, zero.
On addressless interfaces, the corresponding
value of ifIndex in the Internet Standard MIB.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.10.1.3 |
axsOspfNbrRtrIdThe integer uniquely identifying the neighboring
router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.10.1.4 |
axsOspfNbrOptionsA Bit Mask corresponding to the neighbor's op-
tions field.
Bit 0, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zero, the neighbor will ignore all
metrics except the TOS 0 metric.
Bit 1, if set, indicates that the associated
area accepts and operates on external informa-
tion; if zero, it is a stub area.
Bit 2, if set, indicates that the system is ca-
pable of routing IP Multicast datagrams; i.e.,
that it implements the Multicast Extensions to
OSPF.
Bit 3, if set, indicates that the associated
area is an NSSA. These areas are capable of
carrying type 7 external advertisements, which
are translated into type 5 external advertise-
ments at NSSA borders.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.10.1.5 |
axsOspfNbrPriorityThe priority of this neighbor.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.10.1.6 |
axsOspfNbrStateThe State of the relationship with this Neighbor.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.10.1.7 |
axsOspfNbrEventsThe number of times this neighbor relationship
has changed state, or an error has occurred.ro Counter .1.3.6.1.4.1.21839.2.2.1.14.10.1.8 |
axsOspfNbrLsRetransQLenThe current length of the retransmission queue.ro Gauge .1.3.6.1.4.1.21839.2.2.1.14.10.1.9 |
axsOspfNbmaNbrStatusThis variable displays the status of the entry.
This entry value is only valid(1). And enable to response
this entry when axsOspfIfType is nbma.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.10.1.10 |
axsOspfNbmaNbrPermanenceThis variable displays the status of the entry.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.10.1.11 |
axsOspfVirtNbrTableA table of virtual neighbor information. SEQUENCE OF AxsOspfVirtNbrEntry .1.3.6.1.4.1.21839.2.2.1.14.11 |
axsOspfVirtNbrEntryVirtual neighbor information. AxsOspfVirtNbrEntry .1.3.6.1.4.1.21839.2.2.1.14.11.1 |
axsOspfVirtNbrDomainNumberThe domain number.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.11.1.1 |
axsOspfVirtNbrAreaThe Transit Area Identifier.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.11.1.2 |
axsOspfVirtNbrRtrIdA integer uniquely identifying the neighboring
router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.11.1.3 |
axsOspfVirtNbrIpAddrThe IP address this Virtual Neighbor is using.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.11.1.4 |
axsOspfVirtNbrOptionsA Bit Mask corresponding to the neighbor's options
field.
Bit 1, if set, indicates that the system will operate
on Type of Service metrics other than TOS 0. If zero,
the neighbor will ignore all metrics except the TOS
0 metric.
Bit 2, if set, indicates that the system is Network
Multicast capable; ie, that it implements OSPF Multicast
Routing.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.11.1.5 |
axsOspfVirtNbrStateThe state of the Virtual Neighbor Relationship.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.11.1.6 |
axsOspfVirtNbrEventsThe number of times this virtual link has changed
its state, or an error has occurred.ro Counter .1.3.6.1.4.1.21839.2.2.1.14.11.1.7 |
axsOspfVirtNbrLsRetransQLenThe current length of the retransmission queue.ro Gauge .1.3.6.1.4.1.21839.2.2.1.14.11.1.8 |
axsOspfExtLsdbTableThe OSPF Process's Links State Database. SEQUENCE OF AxsOspfExtLsdbEntry .1.3.6.1.4.1.21839.2.2.1.14.12 |
axsOspfExtLsdbEntryA single Link State Advertisement. AxsOspfExtLsdbEntry .1.3.6.1.4.1.21839.2.2.1.14.12.1 |
axsOspfExtLsdbDomainNumberOSPF domain number.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.12.1.1 |
axsOspfExtLsdbTypeThe type of the link state advertisement.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.12.1.2 |
axsOspfExtLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.12.1.3 |
axsOspfExtLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.12.1.4 |
axsOspfExtLsdbSequenceThe sequence number field is a signed 32-bit integer.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.12.1.5 |
axsOspfExtLsdbAgeThe age of the link state advertisement in seconds.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.12.1.6 |
axsOspfExtLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.12.1.7 |
axsOspfExtLsdbAdvertisementThe entire Link State Advertisement, including its header.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.14.12.1.8 |
axsOspfAreaAggregateTableA range of IP addresses specified by an IP
address/IP network mask pair. SEQUENCE OF AxsOspfAreaAggregateEntry .1.3.6.1.4.1.21839.2.2.1.14.14 |
axsOspfAreaAggregateEntryA range of IP addresses specified by an IP
address/IP network mask pair. AxsOspfAreaAggregateEntry .1.3.6.1.4.1.21839.2.2.1.14.14.1 |
axsOspfAreaAggregateDomainNumberOSPF domain number.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.14.1.1 |
axsOspfAreaAggregateAreaIDThe Area the Address Aggregate is to be found within.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.14.1.2 |
axsOspfAreaAggregateLsdbTypeThe type of the Address Aggregate. This field
specifies the Lsdb type that this Address
Aggregate applies to.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.14.1.3 |
axsOspfAreaAggregateNetThe IP Address of the Net or Subnet indicated by the range.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.14.1.4 |
axsOspfAreaAggregateMaskThe Subnet Mask that pertains to the Net or Subnet.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.14.1.5 |
axsOspfAreaAggregateStatusThis variable displays the status of the entry.
This entry value is only valid(1).ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.14.1.6 |
axsOspfAreaAggregateEffectSubnets subsumed by ranges either trigger the
advertisement of the indicated aggregate (ad-
vertiseMatching), or result in the subnet's not
being advertised at all outside the area.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.14.1.7 |
axsOspfTrap OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.14.16 |
axsOspfTrapControlTableThe table about trap information. SEQUENCE OF AxsOspfTrapControlEntry .1.3.6.1.4.1.21839.2.2.1.14.16.1 |
axsOspfTrapControlEntryThe Entry about trap information. AxsOspfTrapControlEntry .1.3.6.1.4.1.21839.2.2.1.14.16.1.1 |
axsOspfTrapDomainNumberaxsOspfTrap domain number.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.14.16.1.1.1 |
axsOspfSetTrapA four-octet string serving as a bit map for
the trap events defined by the OSPF traps. This
object is used to enable and disable specific
OSPF traps where a 1 in the bit field
represents enabled. The right-most bit (least
significant) represents trap 0.rw OCTET STRING .1.3.6.1.4.1.21839.2.2.1.14.16.1.1.2 |
axsOspfConfigErrorTypePotential types of configuration conflicts.
Used by the ospfConfigError and ospfConfigVir-
tError traps.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.16.1.1.3 |
axsOspfPacketTypeOSPF packet types.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.14.16.1.1.4 |
axsOspfPacketSrcThe IP address of an inbound packet that can-
not be identified by a neighbor instance.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.14.16.1.1.5 |
axsOspfTraps OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.14.16.2 |
axsOspfVirtIfStateChangeAn axsOspfIfStateChange trap signifies that there has been a change
in the state of an OSPF virtual interface. TRAP-TYPE .1.3.6.1.4.1.21839.2.2.1.14.16.2.0.1 |
axsOspfNbrStateChangeAn axsOspfNbrStateChange trap signifies that
there has been a change in the state of a non-
virtual OSPF neighbor. This trap should be
generated when the neighbor state regresses
(e.g., goes from Attempt or Full to 1-Way or
Down) or progresses to a terminal state (e.g.,
2-Way or Full). When an neighbor transitions
from or to Full on non-broadcast multi-access
and broadcast networks, the trap should be gen-
erated by the designated router. A designated
router transitioning to Down will be noted by
axsOspfIfStateChange. TRAP-TYPE .1.3.6.1.4.1.21839.2.2.1.14.16.2.0.2 |
axsOspfVirtNbrStateChangeAn axsOspfIfStateChange trap signifies that there
has been a change in the state of an OSPF vir-
tual neighbor. This trap should be generated
when the neighbor state regresses (e.g., goes
from Attempt or Full to 1-Way or Down) or
progresses to a terminal state (e.g., Full). TRAP-TYPE .1.3.6.1.4.1.21839.2.2.1.14.16.2.0.3 |
axsOspfIfConfigErrorAn axsOspfIfConfigError trap signifies that a
packet has been received on a non-virtual in-
terface from a router whose configuration
parameters conflict with this router's confi-
guration parameters. Note that the event op-
tionMismatch should cause a trap only if it
prevents an adjacency from forming. TRAP-TYPE .1.3.6.1.4.1.21839.2.2.1.14.16.2.0.4 |
axsOspfVirtIfConfigErrorAn axsOspfConfigError trap signifies that a pack-
et has been received on a virtual interface
from a router whose configuration parameters
conflict with this router's configuration
parameters. Note that the event optionMismatch
should cause a trap only if it prevents an ad-
jacency from forming. TRAP-TYPE .1.3.6.1.4.1.21839.2.2.1.14.16.2.0.5 |
axsOspfIfAuthFailureAn axsOspfIfAuthFailure trap signifies that a
packet has been received on a non-virtual in-
terface from a router whose authentication key
or authentication type conflicts with this
router's authentication key or authentication
type. TRAP-TYPE .1.3.6.1.4.1.21839.2.2.1.14.16.2.0.6 |
axsOspfVirtIfAuthFailureAn axsOspfVirtIfAuthFailure trap signifies that a
packet has been received on a virtual interface
from a router whose authentication key or au-
thentication type conflicts with this router's
authentication key or authentication type. TRAP-TYPE .1.3.6.1.4.1.21839.2.2.1.14.16.2.0.7 |
axsOspfIfStateChangeAn axsOspfIfStateChange trap signifies that there
has been a change in the state of a non-virtual
OSPF interface. This trap should be generated
when the interface state regresses (e.g., goes
from Dr to Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other, Dr, or
Backup). TRAP-TYPE .1.3.6.1.4.1.21839.2.2.1.14.16.2.0.16 |
axsOspfv3 OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.15 |
axsOspfv3GeneralTableThe table which ospfv3 information is stored in. SEQUENCE OF AxsOspfv3GeneralEntry .1.3.6.1.4.1.21839.2.2.1.15.1 |
axsOspfv3GeneralEntryThe list of the ospfv3 information. AxsOspfv3GeneralEntry .1.3.6.1.4.1.21839.2.2.1.15.1.1 |
axsOspfv3GeneralDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.15.1.1.1 |
axsOspfv3RouterIdA 32-bit integer uniquely identifying the
router in the Autonomous System.
By convention, to ensure uniqueness, this
should default to the value of one of the
router's IPv4 interface addresses if IPv4 is
configured.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.1.1.2 |
axsOspfv3AdminStatThe administrative status of axsOspfv3 in the
router. The value 'enabled' denotes that the
axsOspfv3 Process is active on at least one inter-
face; 'disabled' disables it on all inter-
faces.ro Status (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.1.1.3 |
axsOspfv3VersionNumberThe version number of OSPF for IPv6 is 3.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.15.1.1.4 |
axsOspfv3AreaBdrRtrStatusA flag to note whether this router is an area
border router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.15.1.1.5 |
axsOspfv3ASBdrRtrStatusA flag to note whether this router is config-
ured as an Autonomous System border router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.15.1.1.6 |
axsOspfv3AsScopeLsaCountThe number of AS-Scope (e.g. AS-External) link-state
advertisements in the link-state database.ro Gauge32 .1.3.6.1.4.1.21839.2.2.1.15.1.1.7 |
axsOspfv3AsScopeLsaCksumSumThe 32-bit unsigned sum of the LS checksums of
the AS-scoped link-state advertisements con-
tained in the link-state database. This sum
can be used to determine if there has been a
change in a router's link state database, and
to compare the link-state database of two
routers.ro Integer32 .1.3.6.1.4.1.21839.2.2.1.15.1.1.8 |
axsOspfv3OriginateNewLsasThe number of new link-state advertisements
that have been originated. This number is in-
cremented each time the router originates a new
LSA.ro Counter32 .1.3.6.1.4.1.21839.2.2.1.15.1.1.9 |
axsOspfv3RxNewLsasThe number of link-state advertisements re-
ceived determined to be new instantiations.
This number does not include newer instantia-
tions of self-originated link-state advertise-
ments.ro Counter32 .1.3.6.1.4.1.21839.2.2.1.15.1.1.10 |
axsOspfv3ExtAreaLsdbLimitThe maximum number of non-default AS-
external-LSAs entries that can be stored in the
link-state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external-LSAs
in a router's link-state database reaches
axsOspfv3ExtAreaLsdbLimit, the router enters Overflow-
State. The router never holds more than
axsOspfv3ExtAreaLsdbLimit non-default AS-external-LSAs
in its database. OspfExtAreaLsdbLimit MUST be set
identically in all routers attached to the axsOspfv3
backbone and/or any regular axsOspfv3 area. (i.e.,
axsOspfv3 stub areas and NSSAs are excluded).ro Integer32 (-1..'7FFFFFFF'h) .1.3.6.1.4.1.21839.2.2.1.15.1.1.11 |
axsOspfv3MulticastExtensionsA Bit Mask indicating whether the router is
forwarding IPv6 multicast datagrams
based on the algorithms defined in the Multi-
cast Extensions to OSPF.
Bit 0, if set, indicates that the router can
forward IPv6 multicast datagrams in the router's
directly attached areas (called intra-area mul-
ticast routing).
Bit 1, if set, indicates that the router can
forward IPv6 multicast datagrams between axsOspfv3
areas (called inter-area multicast routing).
Bit 2, if set, indicates that the router can
forward IPv6 multicast datagrams between Auto-
nomous Systems (called inter-AS multicast rout-
ing).
Only certain combinations of bit settings are
allowed, namely: 0 (no multicast forwarding is
enabled), 1 (intra-area multicasting only), 3
(intra-area and inter-area multicasting), 5
(intra-area and inter-AS multicasting) and 7
(multicasting everywhere). By default, no mul-
ticast forwarding is enabled.ro Integer32 .1.3.6.1.4.1.21839.2.2.1.15.1.1.12 |
axsOspfv3DemandExtensionsThe router's support for demand routing.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.15.1.1.14 |
axsOspfv3TrafficEngineeringSupportThe router's support for traffic engineering
extensions.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.15.1.1.15 |
axsOspfv3AreaTableInformation describing the configured parame-
ters and cumulative statistics of the router's
attached areas. SEQUENCE OF AxsOspfv3AreaEntry .1.3.6.1.4.1.21839.2.2.1.15.2 |
axsOspfv3AreaEntryInformation describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas. AxsOspfv3AreaEntry .1.3.6.1.4.1.21839.2.2.1.15.2.1 |
axsOspfv3AreaDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.15.2.1.1 |
axsOspfv3AreaIdA 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the axsOspfv3 backbone.ro AreaID (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.2.1.2 |
axsOspfv3ImportAsExternIndicates whether an area is a Stub area, NSSA, or
standard area. AS-scope LSAs are not imported into Stub
Areas or NSSAs. NSSAs import AS-External data as Type-7
LSAs which have Area-scopero Enumeration .1.3.6.1.4.1.21839.2.2.1.15.2.1.3 |
axsOspfv3SpfRunsThe number of times that the intra-area route
table has been calculated using this area's
link-state database. This is typically done
using Dijkstra's algorithm.ro Counter32 .1.3.6.1.4.1.21839.2.2.1.15.2.1.4 |
axsOspfv3AreaBdrRtrCountThe total number of area border routers reach-
able within this area. This is initially zero,
and is calculated in each SPF Pass.ro Gauge32 .1.3.6.1.4.1.21839.2.2.1.15.2.1.5 |
axsOspfv3AsBdrRtrCountThe total number of Autonomous System border
routers reachable within this area. This is
initially zero, and is calculated in each SPF
Pass.ro Gauge32 .1.3.6.1.4.1.21839.2.2.1.15.2.1.6 |
axsOspfv3AreaScopeLsaCountThe total number of Area-Scope link-state
advertisements in this area's link-state
database.ro Gauge32 .1.3.6.1.4.1.21839.2.2.1.15.2.1.7 |
axsOspfv3AreaScopeLsaCksumSumThe 32-bit unsigned sum of the Area-Scope link-state
advertisements' LS checksums contained in this
area's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers.ro Integer32 .1.3.6.1.4.1.21839.2.2.1.15.2.1.8 |
axsOspfv3AreaSummaryThe variable axsOspfv3AreaSummary controls the im-
port of summary LSAs into stub areas. It has
no effect on other areas.
If it is noAreaSummary, the router will neither
originate nor propagate summary LSAs into the
stub area. It will rely entirely on its de-
fault route.
If it is sendAreaSummary, the router will both
summarize and propagate summary LSAs.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.15.2.1.9 |
axsOspfv3AreaStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.15.2.1.10 |
axsOspfv3StubMetricThe metric value advertised for the default route
into Stub and NSSA areas.ro BigMetric -- .1.3.6.1.4.1.21839.2.2.1.15.2.1.11 |
axsOspfv3AsLsdbTableThe axsOspfv3 Process's AS-Scope Link State Database. SEQUENCE OF AxsOspfv3AsLsdbEntry .1.3.6.1.4.1.21839.2.2.1.15.3 |
axsOspfv3AsLsdbEntryA single AS-Scope Link State Advertisement. AxsOspfv3AsLsdbEntry .1.3.6.1.4.1.21839.2.2.1.15.3.1 |
axsOspfv3AsLsdbDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.15.3.1.1 |
axsOspfv3AsLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format. Unrecognized AS-Scope LSAs with the
U-bit set are also store in this database.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.15.3.1.2 |
axsOspfv3AsLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.3.1.3 |
axsOspfv3AsLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPF for IPv4, the LSID has no
addressing semantics.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.15.3.1.4 |
axsOspfv3AsLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.ro Integer32 .1.3.6.1.4.1.21839.2.2.1.15.3.1.5 |
axsOspfv3AsLsdbAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.21839.2.2.1.15.3.1.6 |
axsOspfv3AsLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.21839.2.2.1.15.3.1.7 |
axsOspfv3AsLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.15.3.1.8 |
axsOspfv3AreaLsdbTableThe axsOspfv3 Process's Area-Scope Link State Database. SEQUENCE OF AxsOspfv3AreaLsdbEntry .1.3.6.1.4.1.21839.2.2.1.15.4 |
axsOspfv3AreaLsdbEntryA single Area-Scope Link State Advertisement. AxsOspfv3AreaLsdbEntry .1.3.6.1.4.1.21839.2.2.1.15.4.1 |
axsOspfv3AreaLsdbDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.15.4.1.1 |
axsOspfv3AreaLsdbAreaIdThe 32 bit identifier of the Area from which the
LSA was received.ro AreaID (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.4.1.2 |
axsOspfv3AreaLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format. Unrecognized Area-Scope LSAs with
the U-bit set are also stored in this database.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.15.4.1.3 |
axsOspfv3AreaLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.4.1.4 |
axsOspfv3AreaLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPF for IPv4, the LSID has no
addressing semantics.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.15.4.1.5 |
axsOspfv3AreaLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.ro Integer32 .1.3.6.1.4.1.21839.2.2.1.15.4.1.6 |
axsOspfv3AreaLsdbAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.21839.2.2.1.15.4.1.7 |
axsOspfv3AreaLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.21839.2.2.1.15.4.1.8 |
axsOspfv3AreaLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.15.4.1.9 |
axsOspfv3LinkLsdbTableThe axsOspfv3 Process's Link-Scope Link State Database. SEQUENCE OF AxsOspfv3LinkLsdbEntry .1.3.6.1.4.1.21839.2.2.1.15.5 |
axsOspfv3LinkLsdbEntryA single Link-Scope Link State Advertisement. AxsOspfv3LinkLsdbEntry .1.3.6.1.4.1.21839.2.2.1.15.5.1 |
axsOspfv3LinkLsdbDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.15.5.1.1 |
axsOspfv3LinkLsdbIfIndexThe identifier of the link from which the LSA
was received.ro Ipv6IfIndex (IPV6-TC) .1.3.6.1.4.1.21839.2.2.1.15.5.1.2 |
axsOspfv3LinkLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format. Unrecognized Link-Scope LSAs with
the U-bit set are also stored in this database.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.15.5.1.3 |
axsOspfv3LinkLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.5.1.4 |
axsOspfv3LinkLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPF for IPv4, the LSID has no
addressing semantics.ro IpAddress .1.3.6.1.4.1.21839.2.2.1.15.5.1.5 |
axsOspfv3LinkLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.ro Integer32 .1.3.6.1.4.1.21839.2.2.1.15.5.1.6 |
axsOspfv3LinkLsdbAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.21839.2.2.1.15.5.1.7 |
axsOspfv3LinkLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.21839.2.2.1.15.5.1.8 |
axsOspfv3LinkLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.15.5.1.9 |
axsOspfv3IfTableThe axsOspfv3 Interface Table describes the inter-
faces from the viewpoint of axsOspfv3. SEQUENCE OF AxsOspfv3IfEntry .1.3.6.1.4.1.21839.2.2.1.15.7 |
axsOspfv3IfEntryThe axsOspfv3 Interface Entry describes one inter-
face from the viewpoint of axsOspfv3. AxsOspfv3IfEntry .1.3.6.1.4.1.21839.2.2.1.15.7.1 |
axsOspfv3IfDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.15.7.1.1 |
axsOspfv3IfIndexThe interface index of this axsOspfv3 interface.
It corresponds to the interface index of the
Ipv6 interface on which axsOspfv3 is configured.ro Ipv6IfIndex (IPV6-TC) .1.3.6.1.4.1.21839.2.2.1.15.7.1.2 |
axsOspfv3IfAreaIdA 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the axsOspfv3 backbone.ro AreaID (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.7.1.3 |
axsOspfv3IfTypeThe axsOspfv3 interface type.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.15.7.1.4 |
axsOspfv3IfAdminStatThe axsOspfv3 interface's administrative status.
The value formed on the interface, and the in-
terface will be advertised as an internal route
to some area. The value 'disabled' denotes
that the interface is external to axsOspfv3.ro Status (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.7.1.5 |
axsOspfv3IfRtrPriorityThe priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligi-
ble to become the designated router on this
particular network. In the event of a tie in
this value, routers will use their Router ID as
a tie breaker.ro DesignatedRouterPriority (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.7.1.6 |
axsOspfv3IfTransitDelayThe estimated number of seconds it takes to
transmit a link state update packet over this
interface.ro UpToMaxAge (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.7.1.7 |
axsOspfv3IfRetransIntervalThe number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets.ro UpToMaxAge (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.7.1.8 |
axsOspfv3IfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for all
routers attached to a common network.ro HelloRange (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.7.1.9 |
axsOspfv3IfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for all routers attached
to a common network.ro PositiveInteger (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.7.1.10 |
axsOspfv3IfPollIntervalThe larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor.ro PositiveInteger (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.7.1.11 |
axsOspfv3IfStateThe axsOspfv3 Interface State.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.15.7.1.12 |
axsOspfv3IfDesignatedRouterThe Router ID of the Designated Router.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.7.1.13 |
axsOspfv3IfBackupDesignatedRouterThe Router ID of the Backup Designated
Router.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.7.1.15 |
axsOspfv3IfEventsThe number of times this OSPF interface has
changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.21839.2.2.1.15.7.1.16 |
axsOspfv3IfStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.15.7.1.18 |
axsOspfv3IfMulticastForwardingThe way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting is not meaning-
ful on point to point and NBMA interfaces, and
setting axsOspfv3MulticastForwarding to 0 effective-
ly disables all multicast forwarding.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.15.7.1.19 |
axsOspfv3IfDemandIndicates whether Demand axsOspfv3 procedures (hel-
lo supression to FULL neighbors and setting the
DoNotAge flag on proogated LSAs) should be per-
formed on this interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.15.7.1.20 |
axsOspfv3IfMetricValueThe metric assigned to this interface.
The default value of the Metric is
10^8 / ifSpeed.ro Metric (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.7.1.21 |
axsOspfv3IfLinkScopeLsaCountThe total number of Link-Scope link-state
advertisements in this link's link-state database.ro Gauge32 .1.3.6.1.4.1.21839.2.2.1.15.7.1.22 |
axsOspfv3IfLinkLsaCksumSumThe 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
link's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers.ro Integer32 .1.3.6.1.4.1.21839.2.2.1.15.7.1.23 |
axsOspfv3IfInstIdEnables multiple instances of axsOspfv3 to be run over
a single link. Each protocol instance would be assigned
a separate ID. This ID has local link significance
only.ro Integer32 .1.3.6.1.4.1.21839.2.2.1.15.7.1.24 |
axsOspfv3VirtIfTableInformation about this router's virtual inter-
faces. SEQUENCE OF AxsOspfv3VirtIfEntry .1.3.6.1.4.1.21839.2.2.1.15.8 |
axsOspfv3VirtIfEntryInformation about a single Virtual Interface. AxsOspfv3VirtIfEntry .1.3.6.1.4.1.21839.2.2.1.15.8.1 |
axsOspfv3VirtIfDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.15.8.1.1 |
axsOspfv3VirtIfAreaIdThe Transit Area that the Virtual Link
traverses. By definition, this is not 0.0.0.0ro AreaID (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.8.1.2 |
axsOspfv3VirtIfNeighborThe Router ID of the Virtual Neighbor.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.8.1.3 |
axsOspfv3VirtIfIndexThe interface index of this axsOspfv3 virtual interface.
It must be unique among all the interface indices
on the router.ro Ipv6IfIndex (IPV6-TC) .1.3.6.1.4.1.21839.2.2.1.15.8.1.4 |
axsOspfv3VirtIfTransitDelayThe estimated number of seconds it takes to
transmit a link- state update packet over this
interface.ro UpToMaxAge (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.8.1.5 |
axsOspfv3VirtIfRetransIntervalThe number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets. This
value should be well over the expected round-
trip time.ro UpToMaxAge (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.8.1.6 |
axsOspfv3VirtIfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for the
virtual neighbor.ro HelloRange (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.8.1.7 |
axsOspfv3VirtIfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for the virtual neigh-
bor.ro PositiveInteger (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.8.1.8 |
axsOspfv3VirtIfStateOSPF virtual interface states.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.15.8.1.9 |
axsOspfv3VirtIfEventsThe number of state changes or error events on
this Virtual Linkro Counter32 .1.3.6.1.4.1.21839.2.2.1.15.8.1.10 |
axsOspfv3VirtIfStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.15.8.1.11 |
axsOspfv3VirtIfLinkScopeLsaCountThe total number of Link-Scope link-state
advertisements in this virtual link's link-state
database.ro Gauge32 .1.3.6.1.4.1.21839.2.2.1.15.8.1.12 |
axsOspfv3VirtIfLinkLsaCksumSumThe 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
virtual link's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers.ro Integer32 .1.3.6.1.4.1.21839.2.2.1.15.8.1.13 |
axsOspfv3NbrTableA table of non-virtual neighbor information. SEQUENCE OF AxsOspfv3NbrEntry .1.3.6.1.4.1.21839.2.2.1.15.9 |
axsOspfv3NbrEntryThe information regarding a single neighbor. AxsOspfv3NbrEntry .1.3.6.1.4.1.21839.2.2.1.15.9.1 |
axsOspfv3NbrDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.15.9.1.1 |
axsOspfv3NbrIfIndexThe local link ID of the link over which the
neighbor can be reached.ro Ipv6IfIndex (IPV6-TC) .1.3.6.1.4.1.21839.2.2.1.15.9.1.2 |
axsOspfv3NbrIpv6AddrThe IPv6 address of the neighbor associated with
the local link.ro Ipv6Address (IPV6-TC) .1.3.6.1.4.1.21839.2.2.1.15.9.1.3 |
axsOspfv3NbrRtrIdA 32-bit integer (represented as a type IpAd-
dress) uniquely identifying the neighboring
router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.9.1.4 |
axsOspfv3NbrOptionsA Bit Mask corresponding to the neighbor's op-
tions field.ro Integer32 .1.3.6.1.4.1.21839.2.2.1.15.9.1.5 |
axsOspfv3NbrPriorityThe priority of this neighbor in the designat-
ed router election algorithm. The value 0 sig-
nifies that the neighbor is not eligible to be-
come the designated router on this particular
network.ro DesignatedRouterPriority (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.9.1.6 |
axsOspfv3NbrStateThe State of the relationship with this Neigh-
bor.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.15.9.1.7 |
axsOspfv3NbrEventsThe number of times this neighbor relationship
has changed state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.21839.2.2.1.15.9.1.8 |
axsOspfv3NbrLsRetransQLenThe current length of the retransmission
queue.ro Gauge32 .1.3.6.1.4.1.21839.2.2.1.15.9.1.9 |
axsOspfv3NbrHelloSuppressedIndicates whether Hellos are being suppressed
to the neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.15.9.1.12 |
axsOspfv3NbrIfIdThe interface ID that the neighbor advertises
in its Hello Packets on this link, that is, the
neighbor's local interface index.ro Ipv6IfIndex (IPV6-TC) .1.3.6.1.4.1.21839.2.2.1.15.9.1.13 |
axsOspfv3VirtNbrTableA table of virtual neighbor information. SEQUENCE OF AxsOspfv3VirtNbrEntry .1.3.6.1.4.1.21839.2.2.1.15.10 |
axsOspfv3VirtNbrEntryVirtual neighbor information. AxsOspfv3VirtNbrEntry .1.3.6.1.4.1.21839.2.2.1.15.10.1 |
axsOspfv3VirtNbrDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.15.10.1.1 |
axsOspfv3VirtNbrAreaThe Transit Area Identifier.ro AreaID (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.10.1.2 |
axsOspfv3VirtNbrRtrIdA 32-bit integer uniquely identifying the
neighboring router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.10.1.3 |
axsOspfv3VirtNbrIfIndexThe local link ID for the virtual link over
which the neighbor can be reached.ro Ipv6IfIndex (IPV6-TC) .1.3.6.1.4.1.21839.2.2.1.15.10.1.4 |
axsOspfv3VirtNbrIpv6AddrThe IPv6 address used to reach this Virtual Neighbor.
It must be a Site-Local or Global scope address.ro Ipv6Address (IPV6-TC) .1.3.6.1.4.1.21839.2.2.1.15.10.1.5 |
axsOspfv3VirtNbrOptionsA Bit Mask corresponding to the neighbor's op-
tions field.ro Integer32 .1.3.6.1.4.1.21839.2.2.1.15.10.1.6 |
axsOspfv3VirtNbrStateThe state of the Virtual Neighbor Relation-
ship.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.15.10.1.7 |
axsOspfv3VirtNbrEventsThe number of times this virtual link has
changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.21839.2.2.1.15.10.1.8 |
axsOspfv3VirtNbrLsRetransQLenThe current length of the retransmission
queue.ro Gauge32 .1.3.6.1.4.1.21839.2.2.1.15.10.1.9 |
axsOspfv3VirtNbrHelloSuppressedIndicates whether Hellos are being suppressed
to the neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.15.10.1.10 |
axsOspfv3VirtNbrIfIdThe interface ID that the neighbor advertises
in its Hello Packets on this virtual link, that is,
the neighbor's local interface index.ro Ipv6IfIndex (IPV6-TC) .1.3.6.1.4.1.21839.2.2.1.15.10.1.11 |
axsOspfv3AreaAggregateTableA range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range sub-
sumes another range the most specific match is
the preferred one. SEQUENCE OF AxsOspfv3AreaAggregateEntry .1.3.6.1.4.1.21839.2.2.1.15.11 |
axsOspfv3AreaAggregateEntryA range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range sub-
sumes another range the most specific match is
the preferred one. AxsOspfv3AreaAggregateEntry .1.3.6.1.4.1.21839.2.2.1.15.11.1 |
axsOspfv3AreaAggregateDomainNumberospfv3 domain number.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.15.11.1.1 |
axsOspfv3AreaAggregateAreaIDThe Area the Address Aggregate is to be found
within.ro AreaID (OSPF-MIB) .1.3.6.1.4.1.21839.2.2.1.15.11.1.2 |
axsOspfv3AreaAggregateAreaLsdbTypeThe type of the Address Aggregate. This field
specifies the Area Lsdb type that this Address Ag-
gregate applies to.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.15.11.1.3 |
axsOspfv3AreaAggregateIndexA unique identifier for this aggregate table entry.ro INTEGER .1.3.6.1.4.1.21839.2.2.1.15.11.1.4 |
axsOspfv3AreaAggregatePrefixThe IPv6 Prefix.ro Ipv6AddressPrefix (IPV6-TC) .1.3.6.1.4.1.21839.2.2.1.15.11.1.5 |
axsOspfv3AreaAggregatePrefixLenThe length of the prefix (in bits). A prefix can
not be shorter than 3 bits.ro INTEGER ( 3..128 ) -- UNITS "bits" .1.3.6.1.4.1.21839.2.2.1.15.11.1.6 |
axsOspfv3AreaAggregateStatusThis variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.15.11.1.7 |
axsOspfv3AreaAggregateEffectPrefixes subsumed by ranges either trigger the
advertisement of the indicated aggregate (ad-
vertiseMatching), or result in the prefix not
being advertised at all outside the area.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.15.11.1.8 |
axsPimMIB OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.24 |
axsPimMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.24.1 |
axsPimNeighborFoundThis trap indicates that PIM neighbor found. TRAP-TYPE .1.3.6.1.4.1.21839.2.2.1.24.1.0.1 |
axsPimNeighborLossThis trap indicates that PIM neighbor lost. TRAP-TYPE .1.3.6.1.4.1.21839.2.2.1.24.1.0.2 |
axsIsisMIB OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.37 |
axsIsisObjects OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.37.1 |
axsIsisSystem OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.37.1.1 |
axsIsisSysTableThe set of instances of the Integrated IS-IS protocol existing on the system. SEQUENCE OF AxsIsisSysEntry .1.3.6.1.4.1.21839.2.2.1.37.1.1.1 |
axsIsisSysEntryEach row defines information specific to a single instance of the IS-IS protocol existing on the system. AxsIsisSysEntry .1.3.6.1.4.1.21839.2.2.1.37.1.1.1.1 |
axsIsisSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. INTEGER -- .1.3.6.1.4.1.21839.2.2.1.37.1.1.1.1.1 |
axsIsisSysLevel OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.37.1.2 |
axsIsisSysLevelTableLevel specific information about the System. SEQUENCE OF AxsIsisSysLevelEntry .1.3.6.1.4.1.21839.2.2.1.37.1.2.1 |
axsIsisSysLevelEntryDescribe variables defined for Area or Domain. AxsIsisSysLevelEntry .1.3.6.1.4.1.21839.2.2.1.37.1.2.1.1 |
axsIsisSysLevelIndexThe level that this entry describes. INTEGER -- .1.3.6.1.4.1.21839.2.2.1.37.1.2.1.1.1 |
axsIsisCirc OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.37.1.3 |
axsIsisCircTableThe table of circuits used by each instance of Integrated IS-IS on this system. SEQUENCE OF AxsIsisCircEntry .1.3.6.1.4.1.21839.2.2.1.37.1.3.1 |
axsIsisCircEntryAn isisCircEntry exists for each circuit used by Integrated IS-IS on this system. AxsIsisCircEntry .1.3.6.1.4.1.21839.2.2.1.37.1.3.1.1 |
axsIsisCircIndexThe identifier of this circuit, unique within the instance of the IS-IS protocol. This object follows the index behavior. This is for SNMP Indexing purposes only and need not have any relation to any protocol value. INTEGER -- .1.3.6.1.4.1.21839.2.2.1.37.1.3.1.1.1 |
axsIsisNotification OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.37.1.10 |
axsIsisNotificationTableObjects seen in the most recent notification from this instance of the IS-IS protocol. SEQUENCE OF AxsIsisNotificationEntry .1.3.6.1.4.1.21839.2.2.1.37.1.10.1 |
axsIsisNotificationEntryEach entry defines variables relevant to notifications for one instance of the IS-IS protocol. AxsIsisNotificationEntry .1.3.6.1.4.1.21839.2.2.1.37.1.10.1.1 |
axsIsisPduLspIdAn Octet String that uniquely identifies a Link State PDU. OCTET STRING -- .1.3.6.1.4.1.21839.2.2.1.37.1.10.1.1.1 |
axsIsisAdjStateThe state of the adjacency REFERENCE ISIS.aoi adjacencyState (78) INTEGER -- .1.3.6.1.4.1.21839.2.2.1.37.1.10.1.1.9 |
axsIsisNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.37.2 |
axsIsisAdjacencyChangeIS-IS Contiguity router state change TRAP-TYPE .1.3.6.1.4.1.21839.2.2.1.37.2.0.17 |
axsStatic OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.38 |
axsStaticTableThe set of instances of the static gateway state. SEQUENCE OF AxsStaticGatewayEntry .1.3.6.1.4.1.21839.2.2.1.38.1 |
axsStaticGatewayEntryEach row defines information about static route gateway state. AxsStaticGatewayEntry .1.3.6.1.4.1.21839.2.2.1.38.1.1 |
axsStaticGatewayAddrThe static route gateway address. IpAddress .1.3.6.1.4.1.21839.2.2.1.38.1.1.1 |
axsStaticGatewayStateThe state of static route gateway. Enumeration .1.3.6.1.4.1.21839.2.2.1.38.1.1.2 |
axsStaticTrap OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.38.2 |
axsStaticGatewayStateChangestatic route gateway state change. TRAP-TYPE .1.3.6.1.4.1.21839.2.2.1.38.2.0.1 |
axsStaticIpv6GatewayStateChangeipv6 static route gateway state change. TRAP-TYPE .1.3.6.1.4.1.21839.2.2.1.38.2.0.2 |
axsStaticIpv6TableThe set of instances of the ipv6 static gateway state. SEQUENCE OF AxsStaticIpv6GatewayEntry .1.3.6.1.4.1.21839.2.2.1.38.3 |
axsStaticIpv6GatewayEntryEach row defines information about ipv6 static route gateway state. AxsStaticIpv6GatewayEntry .1.3.6.1.4.1.21839.2.2.1.38.3.1 |
axsStaticIpv6IfindexThe ifIndex ralated static gateway address. INTEGER .1.3.6.1.4.1.21839.2.2.1.38.3.1.1 |
axsStaticIpv6GatewayAddrThe static route gateway address. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.21839.2.2.1.38.3.1.2 |
axsStaticIpv6GatewayStateThe state of static route gateway. Enumeration .1.3.6.1.4.1.21839.2.2.1.38.3.1.3 |
axsBootManagement OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.51 |
axsBootReasonReason of system start.ro Enumeration .1.3.6.1.4.1.21839.2.2.1.51.1 |
axsLogin OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.52 |
axsLoginNameLog in user name. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.52.1 |
axsLoginTimeDate, time and time zone of user log in.
Format : YYYY/MM/DD hh:mm:ss XXXXXX(time zone)
Time zone format :
JST : JST
GMT+09 : GMT + 09 hours
GMT+10 : GMT + 10 hours DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.52.2 |
axsLogoutTimeDate, time and time zone of user log out.
Format : YYYY/MM/DD hh:mm:ss XXXXXX(time zone)
Time zone format :
JST : JST
GMT+09 : GMT + 09 hours
GMT+10 : GMT + 10 hours DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.52.3 |
axsLoginFailureTimeDate, time and time zone of user log in failure.
Format : YYYY/MM/DD hh:mm:ss XXXXXX(time zone)
Time zone format :
JST : JST
GMT+09 : GMT + 09 hours
GMT+10 : GMT + 10 hours DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.52.4 |
axsLoginLocationConnection information of log in user.
The status will be 'console' or 'aux'.
If other, displays 'IPADDRESS(APLLICATION)'.
ex. '192.168.11.1(telnet)' DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.52.5 |
axsLoginLineTerminal information of log in user.
The status will be 'console' or 'aux'.
If other, displays 'TERMINAL(APLLICATION)'.
ex. 'tty/1(telnet)' DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.52.6 |
axsLogoutStatusLog out factor.
error(1) : log out due to none of bellow
success(2) : log out due to command
timeout(3) : log out due to 'auto-logout'
disconnect(4) : log out due to line disconnection
force(5) : log out due to other user's command Enumeration .1.3.6.1.4.1.21839.2.2.1.52.7 |
axslldp OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.100 |
axslldpConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.100.1 |
axslldpMessageTxIntervalLDPDU transmitting intervalro INTEGER .1.3.6.1.4.1.21839.2.2.1.100.1.1 |
axslldpMessageTxHoldMultiplierTime coefficient for contiguity equipment to hold about the LLDP frame which this equipment transmittedro INTEGER .1.3.6.1.4.1.21839.2.2.1.100.1.2 |
axslldpPortConfigTableThe table about LDPDU transmission SEQUENCE OF AxslldpPortConfigEntry .1.3.6.1.4.1.21839.2.2.1.100.1.6 |
axslldpPortConfigEntryThe entry about LDPDU transmission AxslldpPortConfigEntry .1.3.6.1.4.1.21839.2.2.1.100.1.6.1 |
axslldpPortConfigPortNumPort discernment index INTEGER .1.3.6.1.4.1.21839.2.2.1.100.1.6.1.2 |
axslldpPortConfigAdminStatusThe port state of this equipment about transmission and reception of LDPDUro INTEGER .1.3.6.1.4.1.21839.2.2.1.100.1.6.1.3 |
axslldpPortConfigTLVsTxEnableThe TLV state about the port concerned which can be transmittedro Bits .1.3.6.1.4.1.21839.2.2.1.100.1.6.1.4 |
axslldpPortConfigRowStatusThe state of this entryro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.100.1.6.1.5 |
axslldpStats OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.100.2 |
axslldpStatsTableThe table about LLDP statistics information SEQUENCE OF AxslldpStatsEntry .1.3.6.1.4.1.21839.2.2.1.100.2.1 |
axslldpStatsEntryThe Entry about LLDP statistics information AxslldpStatsEntry .1.3.6.1.4.1.21839.2.2.1.100.2.1.1 |
axslldpStatsPortNumPort discernment index INTEGER .1.3.6.1.4.1.21839.2.2.1.100.2.1.1.2 |
axslldpStatsOperStatusThe employment state about the port concernedro INTEGER .1.3.6.1.4.1.21839.2.2.1.100.2.1.1.3 |
axslldpStatsFramesInErrorsThe number of inaccurate LDPDU reception about the port concernedro Counter .1.3.6.1.4.1.21839.2.2.1.100.2.1.1.4 |
axslldpStatsFramesInTotalThe total number of LDPDU reception about the port concernedro Counter .1.3.6.1.4.1.21839.2.2.1.100.2.1.1.5 |
axslldpStatsFramesOutTotalThe total number of LDPDU transmission about the port concernedro Counter .1.3.6.1.4.1.21839.2.2.1.100.2.1.1.6 |
axslldpStatsTLVsInErrorsThe number of inaccurate TLV reception about the port concernedro Counter .1.3.6.1.4.1.21839.2.2.1.100.2.1.1.7 |
axslldpStatsTLVsDiscardedTotalThe total abandonment TLV number about the port concernedro Counter .1.3.6.1.4.1.21839.2.2.1.100.2.1.1.8 |
axslldpLocalSystemData OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.100.3 |
axslldpLocChassisTypeThe chassis type about this equipmentro INTEGER .1.3.6.1.4.1.21839.2.2.1.100.3.1 |
axslldpLocChassisIdThe chassis ID about this equipmentro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.100.3.2 |
axslldpLocSysNameThe System Name about this equipmentro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.100.3.3 |
axslldpLocSysDescSystem information about this equipmentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.1.100.3.4 |
axslldpLocPortTableThe table about the port of this equipment SEQUENCE OF AxslldpLocPortEntry .1.3.6.1.4.1.21839.2.2.1.100.3.7 |
axslldpLocPortEntryThe entry about the port of this equipment AxslldpLocPortEntry .1.3.6.1.4.1.21839.2.2.1.100.3.7.1 |
axslldpLocPortNumPort discernment index INTEGER .1.3.6.1.4.1.21839.2.2.1.100.3.7.1.1 |
axslldpLocPortTypeThe port type about the port concerned of this equipmentro INTEGER .1.3.6.1.4.1.21839.2.2.1.100.3.7.1.2 |
axslldpLocPortIdThe port ID about the port concerned of this equipmentro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.100.3.7.1.3 |
axslldpLocPortDescPort information about the port concerned of this equipmentro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.100.3.7.1.4 |
axslldpRemoteSystemData OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.100.4 |
axslldpRemTableThe table about contiguity equipment SEQUENCE OF AxslldpRemEntry .1.3.6.1.4.1.21839.2.2.1.100.4.1 |
axslldpRemEntryThe entry about contiguity equipment AxslldpRemEntry .1.3.6.1.4.1.21839.2.2.1.100.4.1.1 |
axslldpRemLocalPortNumThe discernment index of the port of this equipment which received the information about contiguity equipment INTEGER .1.3.6.1.4.1.21839.2.2.1.100.4.1.1.2 |
axslldpRemIndexThe index about contiguity equipment INTEGER .1.3.6.1.4.1.21839.2.2.1.100.4.1.1.3 |
axslldpRemRemoteChassisTypeThe chassis type about contiguity equipmentro INTEGER .1.3.6.1.4.1.21839.2.2.1.100.4.1.1.4 |
axslldpRemRemoteChassisThe chassis ID about contiguity equipmentro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.100.4.1.1.5 |
axslldpRemRemotePortTypeThe port type about the port concerned of contiguity equipmentro INTEGER .1.3.6.1.4.1.21839.2.2.1.100.4.1.1.6 |
axslldpRemRemotePortThe port ID about the port concerned of contiguity equipmentro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.100.4.1.1.7 |
axslldpRemPortDescInformation about the port concerned of contiguity equipmentro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.100.4.1.1.8 |
axslldpRemSysNameThe system name about contiguity equipmentro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.100.4.1.1.9 |
axslldpRemSysDescSystem information about contiguity equipmentro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.100.4.1.1.10 |
axslldpRemoteOriginInfoData OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.1.100.20 |
axslldpRemOriginInfoTableThe table about original with AlaxalA networks TLV of contiguity equipment SEQUENCE OF AxslldpRemOriginInfoEntry .1.3.6.1.4.1.21839.2.2.1.100.20.1 |
axslldpRemOriginInfoEntryThe entry about original with AlaxalA networks TLV of contiguity equipment AxslldpRemOriginInfoEntry .1.3.6.1.4.1.21839.2.2.1.100.20.1.1 |
axslldpRemOriginInfoPortNumThe discernment index of the port of this equipment which received the information about contiguity equipment. INTEGER .1.3.6.1.4.1.21839.2.2.1.100.20.1.1.1 |
axslldpRemOriginInfoIndexThe index about contiguity equipment INTEGER .1.3.6.1.4.1.21839.2.2.1.100.20.1.1.2 |
axslldpRemOriginInfoLowerVlanListWhat expressed effective VLAN ID by the bit map by VLAN 1-2047 in the port concerned of contiguity equipment.
(The first bit (27 bits of the 0th byte) shows the presence of the untagged definition, and, hereafter,
shows effective/invalidity of VLAN 1-2047)ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.100.20.1.1.3 |
axslldpRemOriginInfoHigherVlanListWhat expressed effective VLAN ID by the bit map by VLAN 2048-4095 in the port concerned of contiguity equipment.
(Effective/invalidity of VLAN 2048-4095 is sequentially shown from the first bit (27 bits of the 0th byte))ro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.100.20.1.1.4 |
axslldpRemOriginInfoIPv4AddressIPv4 address given to the port concerned of contiguity equipmentro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.100.20.1.1.5 |
axslldpRemOriginInfoIPv4PortTypePort classification of the port of contiguity equipment concernedro INTEGER .1.3.6.1.4.1.21839.2.2.1.100.20.1.1.6 |
axslldpRemOriginInfoIPv4VlanIdThe smallest thing among VLAN ID to which IPv4 address is givenro INTEGER .1.3.6.1.4.1.21839.2.2.1.100.20.1.1.7 |
axslldpRemOriginInfoIPv6AddressThe IPv6 address given to the port concerned of contiguity equipmentro OCTET STRING .1.3.6.1.4.1.21839.2.2.1.100.20.1.1.8 |
axslldpRemOriginInfoIPv6PortTypePort classification of the port of contiguity equipment concernedro INTEGER .1.3.6.1.4.1.21839.2.2.1.100.20.1.1.9 |
axslldpRemOriginInfoIPv6VlanIdThe smallest thing among VLAN ID to which the IPv6 address is givenro INTEGER .1.3.6.1.4.1.21839.2.2.1.100.20.1.1.10 |
ax7800sMib OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.2 |
ax7800sSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.2.1 |
ax7800sModelTypeModel type of this system.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.1.1 |
ax7800sSoftware OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.2.1.2 |
ax7800sSoftwareNameSoftware name of this system.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.1.2.1 |
ax7800sSoftwareAbbreviationSystem software abbreviation.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.1.2.2 |
ax7800sSoftwareVersionSystem software version.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.1.2.3 |
ax7800sSystemMsg OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.2.1.3 |
ax7800sSystemMsgTextThe text of the system log message.For information about this code,
see: Operator's Manual.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.1.3.1 |
ax7800sSystemMsgTypeThe event type. For information about this code, see: Operator's Manual.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.2.1.3.2 |
ax7800sSystemMsgTimeStampThe time that event occured. And that is expressed as type of
MM/DD hh:mm:ss
MM:month(01-12)
DD:day(01-31)
hh:hour(00-23)
mm:minute(00-59)
ss:second(00-59)
Insert space between DD and hh.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.1.3.3 |
ax7800sSystemMsgLevelThe newest system message log level.For information about this code,
see: Operator's Manual.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.2.1.3.4 |
ax7800sSystemMsgEventPointThe code of part that system message error occured. For information
about this code,see: Operator's Manual.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.1.3.5 |
ax7800sSystemMsgEventInterfaceIDInterface identification of system messages. For information
about this code,see: Operator's Manual.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.1.3.6 |
ax7800sSystemMsgEventCodeEvent kind code of system messages. For information about this code,
see: Operator's Manual.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.2.1.3.7 |
ax7800sSystemMsgAdditionalCodeAdditional code of system messages. For information about this code,
see: Operator's Manual.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.2.1.3.8 |
ax7800sSnmpAgent OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.2.1.4 |
ax7800sSnmpSendReceiveSizeSNMP packet data size in Manager-to-Agent communication. The value is
displayed in bytes.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.1.4.1 |
ax7800sSnmpReceiveDelayA recommendable interval to receive packets from Manager.The value is
displayed in milliseconds.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.1.4.2 |
ax7800sSnmpContinuousSendNumber of times that is recommendable continuous transmission
packets.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.1.4.3 |
ax7800sSnmpObjectMaxNumberMax number of objects that contain SNMP packet.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.1.4.4 |
ax7800sLicense OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.2.1.6 |
ax7800sLicenseNumberThe number of the configured license serial numbers.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.1.6.1 |
ax7800sLicenseTableThe table containing the license information. SEQUENCE OF Ax7800sLicenseTableEntry .1.3.6.1.4.1.21839.2.2.2.1.6.2 |
ax7800sLicenseEntryThe entry of license information. Ax7800sLicenseTableEntry .1.3.6.1.4.1.21839.2.2.2.1.6.2.1 |
ax7800sLicenseIndexThe unique index number given for each serial number. The number is from 1 to ax7800sLicenseNumber. INTEGER .1.3.6.1.4.1.21839.2.2.2.1.6.2.1.1 |
ax7800sLicenseSerialNumberThe serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.2.1.6.2.1.2 |
ax7800sLicenseOptionNumberThe number of option licenses associated with the serial number.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.1.6.2.1.3 |
ax7800sLicenseOptionTableThe table containing option licenses information associated with the serial number. SEQUENCE OF Ax7800sLicenseOptionTableEntry .1.3.6.1.4.1.21839.2.2.2.1.6.3 |
ax7800sLicenseOptionEntryThe entry of the option license information associated with the serial number. Ax7800sLicenseOptionTableEntry .1.3.6.1.4.1.21839.2.2.2.1.6.3.1 |
ax7800sLicenseOptionIndexThe unique index number given for each serial number. The same number as ax7800sLicenseIndex. INTEGER .1.3.6.1.4.1.21839.2.2.2.1.6.3.1.1 |
ax7800sLicenseOptionNumberIndexThe unique index number of option licenses information which is given for each serial number. The number is from 1 to ax7800sLicenseNumber. INTEGER .1.3.6.1.4.1.21839.2.2.2.1.6.3.1.2 |
ax7800sLicenseOptionSoftwareNameThe software model name of the option license information associated with the serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.2.1.6.3.1.3 |
ax7800sLicenseOptionSoftwareAbbreviationThe software abbreviated name of the option license information associated with the serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.2.1.6.3.1.4 |
ax7800sDevice OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.2.2 |
ax7800sChassis OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.2.2.1 |
ax7800sChassisMaxNumberMax number of cluster chassis that can connect to this router.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.1.1 |
ax7800sChassisTableA table containing chassis information. SEQUENCE OF Ax7800sChassisTableEntry .1.3.6.1.4.1.21839.2.2.2.2.1.2 |
ax7800sChassisEntryAn entry containing specific chassis. Ax7800sChassisTableEntry .1.3.6.1.4.1.21839.2.2.2.2.1.2.1 |
ax7800sChassisIndexA number to specify ax7800sChassisEntry. INTEGER .1.3.6.1.4.1.21839.2.2.2.2.1.2.1.1 |
ax7800sChassisTypeChassis type of this system.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.1.2.1.2 |
ax7800sChassisStatusCurrent status of this chassis.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.1.2.1.3 |
ax7800sBcuBoardDuplexModeDuplex mode of BCU Board.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.1.2.1.4 |
ax7800sPowerUnitNumberNumber of maximum power switches that this router can connect its.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.1.2.1.5 |
ax7800sFanNumberThe maximum number of fans that can connect to this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.1.2.1.6 |
ax7800sCifNumberNumber of cluster interfaces that can connect to this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.1.2.1.7 |
ax7800sBcuBoardNumberNumber of BCU boards that can connect to
this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.1.2.1.8 |
ax7800sPsuBoardNumberNumber of Psu boards that can connect to
this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.1.2.1.9 |
ax7800sNifBoardNumberNumber of NIF(Network InterFace) boards that can connect to
this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.1.2.1.10 |
ax7800sPowerUnitTableA table containing power unit information. SEQUENCE OF Ax7800sPowerUnitTableEntry .1.3.6.1.4.1.21839.2.2.2.2.1.3 |
ax7800sPowerUnitEntryAn entry containing power unit information. Ax7800sPowerUnitTableEntry .1.3.6.1.4.1.21839.2.2.2.2.1.3.1 |
ax7800sPowerUnitIndexA number to position of the power units.The value from 1
to ax7800sPowerUnitNumber. INTEGER .1.3.6.1.4.1.21839.2.2.2.2.1.3.1.1 |
ax7800sPowerConnectStatusThe current connection status of the power unit.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.1.3.1.2 |
ax7800sPowerSupplyStatusStatus of power supply. The value is -1 when Power Supply is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.1.3.1.3 |
ax7800sFanTableA table containing fan information. SEQUENCE OF Ax7800sFanTableEntry .1.3.6.1.4.1.21839.2.2.2.2.1.4 |
ax7800sFanEntryThis entry containing information for a fan. Ax7800sFanTableEntry .1.3.6.1.4.1.21839.2.2.2.2.1.4.1 |
ax7800sFanIndexIndex to indicate position of fans. INTEGER .1.3.6.1.4.1.21839.2.2.2.2.1.4.1.1 |
ax7800sFanStatusStatus of fans.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.1.4.1.2 |
ax7800sBcuBoard OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.2.2.2 |
ax7800sBcuBoardTableA table containing BCU boards information. SEQUENCE OF Ax7800sBcuBoardTableEntry .1.3.6.1.4.1.21839.2.2.2.2.2.1 |
ax7800sBcuBoardEntryAn entry containing BCU boards about specific
chassis. Ax7800sBcuBoardTableEntry .1.3.6.1.4.1.21839.2.2.2.2.2.1.1 |
ax7800sBcuBoardIndexPosition information of the BCU slot. The value is from 1 to
ax7800sBcuBoardCardNumber. INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.1 |
ax7800sBcuIoBoardTypeBCU IO board ID.
The value is -1 when BCU board is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.2 |
ax7800sBcuCpuBoardTypeThe value of BCU board ID.
The value is -1 when BCU board is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.3 |
ax7800sBcuOperStatusStatus of LED on BCU board. The value is 32 when BCU board is
disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.4 |
ax7800sBcuOperModeStatusOperate status on BCU board. The value is -1 when BCU board is
disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.5 |
ax7800sBcuActiveLedStatusStatus of ACTIVE LED on BCU board. The value is -1 when BCU board is
disconnected or LED status is unknown.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.6 |
ax7800sBcuReadyLedStatusStatus of READY LED on BCU board. The value is -1 when BCU board is
disconnected or LED status is unknown.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.7 |
ax7800sBcuAlarmLedStatusStatus of ALARM LED on BCU board. The value is -1 when BCU board is
disconnected or LED status is unknown.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.8 |
ax7800sBcuErrorLedStatusStatus of LED ERROR on BCU board. The value is -1 when BCU board is
disconnected or LED status is unknown.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.9 |
ax7800sBcuEmaLedStatusStatus of LED EMA READY on BCU board. The value is -1 when BCU board is
disconnected or LED status is unknown.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.10 |
ax7800sBcuRmEthernetStatusOperaion status on BCU ethernet. The value is -1 when BCU board is
disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.12 |
ax7800sBcuAtaCardNumberNumber of slots in ATA card. The value is 0 when BCU board is
disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.13 |
ax7800sBcuAtaBootDevThe value of ATA slots number when router booted. The value is -1
when BCU board is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.14 |
ax7800sBcuBoardNameThe product name of RM-IO board.When BCU board is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.15 |
ax7800sBcuBoardAbbreviationThe abbreviation name of RM-IO board.When BCU board is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.16 |
ax7800sBcuIoBoardProductCodeThe manufacturing management number of BCU-IO board.The value is
-1 when BCU board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.17 |
ax7800sBcuCpuBoardProductCodeThe manufacturing management number of BCU-CPU board.The value is
-1 when BCU board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.18 |
ax7800sBcuRmCpuNameThe CPU name of board that load BCU.When BCU board is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.19 |
ax7800sBcuRmCpuClockThe CPU clock of board that load BCU. The value is displayed in
mega-hertz(MHz). The value is -1 when BCU board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.20 |
ax7800sBcuRmMemoryTotalSizeTotal memory sizes of BCU. The value is displayed in kilobyte(KB).
The value is -1 when BCU board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.21 |
ax7800sBcuRmMemoryUsedSizeUsing memory sizes of BCU. The value is displayed in kilobyte(KB).
The value is -1 when BCU board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.22 |
ax7800sBcuRmMemoryFreeSizeFree memory sizes of BCU. The value is displayed in kilobyte(KB).
The value is -1 when BCU board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.23 |
ax7800sBcuRmRomVersionThe version of Rom on BCU board. When BCU board is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.24 |
ax7800sBcuRmCpuLoad1mThe average, over the last minute, of the percentage of time that
this processor was utilized to processing and transfer data.
The value is 0 when BCU board is standby or disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.25 |
ax7800sBcuTemperatureStatusNumberThe maximum number of ax7800sTemperatureStatus that can be measurement at this chassis.
The value is 0 when BCU board doesn't support the temperature measurement function or BCU board is disconnectedro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.26 |
ax7800sBcuCpOperStatusThe state of CP. other(1),Under Operation(2),Initializing(3),Fault(4),Standby system BCU not implemented(32)ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.27 |
ax7800sBcuCpCpuNameThe character sequence of the CPU name whose number is a maximum of 16.(ex : MIPS RM5261).Return length 0 if standby system BCR not implemented.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.28 |
ax7800sBcuCpCpuClockThe numerical value of a CP CPU clock. unit of measure: MHz (ex:250), it is -1 if standby system BCU not implemented.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.29 |
ax7800sBcuCpMemoryTotalSizeThe numerical value of the main memory size of CP. Unit of measure : KByte,(ex : 32768)ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.30 |
ax7800sBcuCpCpuLoad1mThe numerical value(1-100) of CP CPU activity ratio for a minute.If the state of CP is not Under Operation, return 0. If standby system BCU is not implemented return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.33 |
ax7800sBcuSerialNumberThe character string of the card management information of BCU package whose number is a maximum of 30. Its length is zero if not implemented or closed.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.34 |
ax7800sBcuVoltage150The numerical value of the voltage at the observation point of 1.5V voltage. Unit of measure : 10mV (ex : 148)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.35 |
ax7800sBcuVoltage180The numerical value of the voltage at the observation point of 1.8V voltage. Unit of measure : 10mV (ex : 183)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.36 |
ax7800sBcuVoltage250The numerical value of the voltage at the observation point of 2.5V voltage. Unit of measure : 10mV (ex : 250)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.37 |
ax7800sBcuVoltage330The numerical value of the voltage at the observation point of 3.3V voltage. Unit of measure : 10mV (ex : 328)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.38 |
ax7800sBcuVoltage500The numerical value of the voltage at the observation point of 5V voltage. Unit of measure : 10mV (ex : 493)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.39 |
ax7800sBcuVoltage130The numerical value of the voltage at the observation point of 1.3V voltage. Unit of measure : 10mV (ex : 133)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.40 |
ax7800sBcuPbmVoltage105The numerical value of the voltage at the observation point of 1.05V voltage in PBM. Unit of measure : 10mV (ex : 102)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.41 |
ax7800sBcuPbmVoltage120The numerical value of the voltage at the observation point of 1.2V voltage in PBM. Unit of measure : 10mV (ex : 121)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.42 |
ax7800sBcuPbmCpuCoreVoltageThe numerical value of the voltage at the observation point of 1.2-1.3V voltage in PBM. Unit of measure : 10mV (ex : 125)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.43 |
ax7800sBcuPbmVoltage150The numerical value of the voltage at the observation point of 1.5V voltage in PBM. Unit of measure : 10mV (ex : 148)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.44 |
ax7800sBcuPbmVoltage180The numerical value of the voltage at the observation point of 1.8V voltage in PBM. Unit of measure : 10mV (ex : 183)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.1.1.45 |
ax7800sAtaCardTableA table containing ATA Card information. SEQUENCE OF Ax7800sAtaCardTableEntry .1.3.6.1.4.1.21839.2.2.2.2.2.2 |
ax7800sAtaCardEntryAn entry containing ATA Card information. Ax7800sAtaCardTableEntry .1.3.6.1.4.1.21839.2.2.2.2.2.2.1 |
ax7800sAtaCardIndexConnected position of ATA cards.The value is 1 plus slot number
that ATA card is inserted.The value is from 1 to ax7800sBcuAtaCardNumber. INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.2.1.1 |
ax7800sAtaCardConnectionConnected status of ATA cards.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.2.2.1.2 |
ax7800sAtaCardTotalSizeTotal capacity of ATA cards.The value is displayed in kilobyte
(kbyte).And the value is -1 when ATA cards is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.2.1.3 |
ax7800sAtaCardUsedSizeUsing capacity of ATA cards.The value is displayed in kilobyte
(kbyte).And the value is -1 when ATA cards is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.2.1.4 |
ax7800sAtaCardFreeSizeThe rest capacity of ATA card. The value is displayed in kilobyte
(kbyte). The value is -1 when ATA card is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.2.1.5 |
ax7800sAtaCardNameThe product name of ATA card. When the ATA card is unknown,
this OCTET STRING value is 'unknown'. When ATA card is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.2.2.2.1.6 |
ax7800sAtaCardAbbreviationThe kind of ATA card. When ATA card is disconnected,this will be an
OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.2.2.2.1.7 |
ax7800sAtaCardMountStatusThe mount state of ATA card. The value is -1 when ATA card is
disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.2.2.1.8 |
ax7800sTemperatureStatusTableThe table of ambient temperature status maintained by the
environmental monitor. SEQUENCE OF Ax7800sTemperatureStatusEntry .1.3.6.1.4.1.21839.2.2.2.2.2.3 |
ax7800sTemperatureStatusEntryAn entry in the ambient temperature status table, representing
the status of the associated testpoint maintained by the
environmental monitor. Ax7800sTemperatureStatusEntry .1.3.6.1.4.1.21839.2.2.2.2.2.3.1 |
ax7800sTemperatureStatusIndexUnique index for the testpoint being instrumented.
This index is for SNMP purposes only, and has no
intrinsic meaning. INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.3.1.1 |
ax7800sTemperatureStatusDescrTextual description of the testpoint being instrumented.
This description is a short textual label, suitable as a
human-sensible identification for the rest of the
information in the entry.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.2.2.3.1.2 |
ax7800sTemperatureStatusValueThe current measurement of the testpoint being instrumented.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.3.1.3 |
ax7800sTemperatureThresholdThe highest value that the associated instance of the
object ax7800sTemperatureStatusValue may obtain
before an emergency shutdown of the managed device is
initiated.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.2.3.1.4 |
ax7800sTemperatureStateThe current state of the testpoint being instrumented.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.2.3.1.5 |
ax7800sSopTableA table containing SOP information. SEQUENCE OF Ax7800sSopEntry .1.3.6.1.4.1.21839.2.2.2.2.2.4 |
ax7800sSopEntryAn entry containing SOP information. Ax7800sSopEntry .1.3.6.1.4.1.21839.2.2.2.2.2.4.1 |
ax7800sSopAlarmLevelError level displayed on a SOP window. When the BCU does not
support SOP, this will be an OCTET STRING of zero length.
For information about this code, see: Operator's Manual.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.2.2.2.4.1.1 |
ax7800sSopAlarmEventPointThe code displayed on a SOP window, which stands for a device
part of the factor of the alarm message. When the BCU does not
support SOP, this will be an OCTET STRING of zero length.
For information about this code, see: Operator's Manual.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.2.2.2.4.1.2 |
ax7800sSopAlarmEventCodeEvent kind code of alarm message displayed on a SOP window.
When the BCU does not support SOP, this will be an OCTET STRING
of zero length. For information about this code, see: Operator's
Manual.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.2.2.2.4.1.3 |
ax7800sSopAlarmEventInterfaceIDInterface identification of alarm messages on a SOP window.
When the BCU does not support SOP, this will be an OCTET STRING
of zero length. For information about this code, see: Operator's
Manual.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.2.2.2.4.1.4 |
ax7800sSopAlarmMsgTextThe text of the alarm message on a SOP window. When the BCU does
not support SOP, this will be an OCTET STRING of zero length.
For more information about this code, see: Operator's Manual.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.2.2.2.4.1.5 |
ax7800sPsuBoard OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.2.2.3 |
ax7800sPsuBoardTableA table containing PSU boards information about
specific chassis. SEQUENCE OF Ax7800sPpuBoardTableEntry .1.3.6.1.4.1.21839.2.2.2.2.3.1 |
ax7800sPsuBoardEntryAn entry containing PSU boards about specific
chassis. Ax7800sPpuBoardTableEntry .1.3.6.1.4.1.21839.2.2.2.2.3.1.1 |
ax7800sPsuBoardIndexPosition information of the PSU slots. The value is from 1 to
ax7800sPsuBoardNumber. INTEGER .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.1 |
ax7800sPsuBoardTypePSU boards ID.
The value is -1 when PSU board is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.2 |
ax7800sPsuOperStatusOperation stasus of PSU board.(STATUS LED)ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.3 |
ax7800sPsuBoardNamePSU board name. When PSU board is disconnected, this will be an OCTET
STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.4 |
ax7800sPsuBoardAbbreviationThe abbreviation name of PSU board. When PSU board is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.5 |
ax7800sPsuBoardProductCodeThe revision of PSU board. When PSU board is disconnected,
this will be -1.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.6 |
ax7800sPsuSerialNumberThe character string of the card management information of PSU package whose number is a maximum of 30. Its length is zero if not implemented or closed.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.7 |
ax7800sPsuVoltage120The numerical value of the voltage at the observation point of 1.2V voltage. Unit of measure : 10mV (ex : 148) .If PSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.8 |
ax7800sPsuVoltage150The numerical value of the voltage at the observation point of 1.5V voltage. Unit of measure : 10mV (ex : 148) .If PSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.9 |
ax7800sPsuVoltage180The numerical value of the voltage at the observation point of 1.8V voltage. Unit of measure : 10mV (ex : 183) .If PSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.10 |
ax7800sPsuVoltage250The numerical value of the voltage at the observation point of 2.5V voltage. Unit of measure : 10mV (ex : 250) .If PSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.11 |
ax7800sPsuVoltage330The numerical value of the voltage at the observation point of 3.3V voltage. Unit of measure : 10mV (ex : 328) .If PSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.12 |
ax7800sPsuVoltage500The numerical value of the voltage at the observation point of 5V voltage. Unit of measure : 10mV (ex : 493) .If PSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.13 |
ax7800sPsuVoltage120-2The numerical value of the voltage at the observation point of 1.2V voltage. Unit of measure : 10mV (ex : 123) .If PSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.14 |
ax7800sPsuVoltage120-3The numerical value of the voltage at the observation point of 1.2V voltage. Unit of measure : 10mV (ex : 123) .If PSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.15 |
ax7800sPsuVoltage120-4The numerical value of the voltage at the observation point of 1.2V voltage. Unit of measure : 10mV (ex : 123) .If PSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.16 |
ax7800sPsuVoltage120-5The numerical value of the voltage at the observation point of 1.2V voltage. Unit of measure : 10mV (ex : 123) .If PSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.17 |
ax7800sPsuVoltage120-6The numerical value of the voltage at the observation point of 1.2V voltage. Unit of measure : 10mV (ex : 123) .If PSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.18 |
ax7800sPsuVoltage120-7The numerical value of the voltage at the observation point of 1.2V voltage. Unit of measure : 10mV (ex : 123) .If PSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.19 |
ax7800sPsuVoltage120-8The numerical value of the voltage at the observation point of 1.2V voltage. Unit of measure : 10mV (ex : 123) .If PSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.3.1.1.20 |
ax7800sNifBoard OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.2.2.4 |
ax7800sNifBoardTableA table containing Network Interface cards (NIF) information that
slot is loaded. SEQUENCE OF Ax7800sNifBoardTableEntry .1.3.6.1.4.1.21839.2.2.2.2.4.1 |
ax7800sNifBoardEntryAn entry containing NIF information about specific chassis. Ax7800sNifBoardTableEntry .1.3.6.1.4.1.21839.2.2.2.2.4.1.1 |
ax7800sNifBoardSlotIndexPosition information of NIF loading slot. The value is from 1
to ax7800sNifBoardNumber. INTEGER .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.1 |
ax7800sNifBoardTypeType of connecting package.The value is register value of NIF package.
The value is -1 when PSU is disconnected or NIF disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.2 |
ax7800sNifBoardOperStatusOperation status of Network InterFace(NIF) board.(STATUS LED)ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.3 |
ax7800sNifBoardNameNetwork InterFace(NIF) board name. When PSU board or NIF board is
disconnected,this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.4 |
ax7800sNifBoardAbbreviationThe abbreviation name of Network InterFace(NIF) board. When PSU board
or NIF board is disconnected, this will be an OCTET STRING of zero
length.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.5 |
ax7800sNifBoardProductCodeThe product management code of Network InterFace(NIF) board.The value
is -1 when PSU board or NIF board is disconncted.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.6 |
ax7800sNifPhysLineNumberNumber of Network InterFace(NIF)'s physical port.The max is 8.
The value is -1 when value of ax7800sNifCardType is -1 or other(1).ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.7 |
ax7800sNifSerialNumberManagement information (SerialNumber) of Network InterFace(NIF) package.
It shows by the character string of 30 characters or less.
When PRU board responds and things except UP or NIF board is disconnected or closed,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.8 |
ax7800sNifVoltageAM520The numerical value of the voltage at the observation point of -5.2V voltage. Unit of measure : 10mV (ex : -512) .If PSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.9 |
ax7800sNifVoltage150The numerical value of the voltage at the observation point of -1.5V voltage. Unit of measure : 10mV (ex : 148) .If PSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.10 |
ax7800sNifVoltage180The numerical value of the voltage at the observation point of 1.8V voltage. Unit of measure : 10mV (ex : 183) .If PSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.11 |
ax7800sNifVoltageA180The numerical value of the voltage at the observation point of analog 1.8V voltage. Unit of measure : 10mV (ex : 183) .If PSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.12 |
ax7800sNifVoltage250The numerical value of the voltage at the observation point of analogu 2.5V voltage. Unit of measure : 10mV (ex : 250) .If PSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.13 |
ax7800sNifVoltage330The numerical value of the voltage at the observation point of analogu 3.3V voltage. Unit of measure : 10mV (ex : 328) .If PSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.14 |
ax7800sNifVoltageA330The numerical value of the voltage at the observation point of analog 3.3V voltage. Unit of measure : 10mV (ex : 328) .If PSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.15 |
ax7800sNifVoltageA500The numerical value of the voltage at the observation point of analog 5V voltage. Unit of measure : 10mV (ex : 493) .If PSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.16 |
ax7800sNifVoltage330SThe numerical value of the voltage at the observation point of 3.3V voltage. Unit of measure : 10mV (ex : 328) .If PSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.17 |
ax7800sNifVoltage500SThe numerical value of the voltage at the observation point of 5V voltage. Unit of measure : 10mV (ex : 493) .If PSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.18 |
ax7800sNifVoltage120The numerical value of the voltage at the observation point of 1.2V voltage. Unit of measure : 10mV (ex : 123) .If PSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.19 |
ax7800sNifVoltageA500-2The numerical value of the voltage at the observation point of 5V voltage. Unit of measure : 10mV (ex : 498) .If PSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.20 |
ax7800sNifVoltage150SThe numerical value of the voltage at the observation point of 1.5V voltage. Unit of measure : 10mV (ex : 148) .If PSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.4.1.1.21 |
ax7800sPhysLine OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.2.2.5 |
ax7800sPhysLineTableA table containing physical port information. SEQUENCE OF Ax7800sPhysLineTableEntry .1.3.6.1.4.1.21839.2.2.2.2.5.1 |
ax7800sPhysLineEntryAn entry containing physical port. Ax7800sPhysLineTableEntry .1.3.6.1.4.1.21839.2.2.2.2.5.1.1 |
ax7800sPhysLineIndexPhysical port number. The value is from 1 to ax7800sNifLineNumber. INTEGER .1.3.6.1.4.1.21839.2.2.2.2.5.1.1.1 |
ax7800sPhysLineConnectorTypeConnector type is connected physical port. The value is 1(other)
when connector is disconnected or connector type is unknown.When
displaying in pannel, requests board name of NIF,then will display it.
The value is -1 when PSU or NIF board is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.5.1.1.2 |
ax7800sPhysLineOperStatusStatus of physical port. The value is -1 when PSU or NIF board is
disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.5.1.1.3 |
ax7800sPhysLineIfIndexNumberNumber of ifIndex which is included in physical port.The value is -1
when PSU board or NIF board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.5.1.1.4 |
ax7800sPhysLineTransceiverStatusType and status of replaceable transceiver.ro Enumeration .1.3.6.1.4.1.21839.2.2.2.2.5.1.1.5 |
ax7800sInterface OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.2.2.6 |
ax7800sLineIfTableA table containing physical port correspond to ifIndex. SEQUENCE OF Ax7800sLineIfTableEntry .1.3.6.1.4.1.21839.2.2.2.2.6.1 |
ax7800sLineIfEntryAn entry containing ifIndex is assigned to physical port. Ax7800sLineIfTableEntry .1.3.6.1.4.1.21839.2.2.2.2.6.1.1 |
ax7800sLineIfIndexThe value of ifIndex to distinguish entry of this table.The value is
from 1 to ax7800sPhysLineIfIndexNumber. INTEGER .1.3.6.1.4.1.21839.2.2.2.2.6.1.1.1 |
ax7800sIfIndexThe value of ifIndex which is assigned to this physical port.
The value is 0 when ifIndex is not assigned to this physical port.ro INTEGER .1.3.6.1.4.1.21839.2.2.2.2.6.1.1.2 |
ax7800sIfIpAddressThe IP address correspond to ifIndex which is assigned to this
physical port. If IP address is not assigned, it is '0.0.0.0'.ro IpAddress .1.3.6.1.4.1.21839.2.2.2.2.6.1.1.3 |
ax7800sIfIpv6AddressThe IPv6 address correspond to ifIndex which is assigned to this
physical port. If IPv6 address is not assigned,
it is '00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00'.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.2.2.6.1.1.4 |
ax7800sManagementMIB OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.2.3 |
ax7800sOperationCommand OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.2.3.1 |
ax7800sFdbClearMIB OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.2.3.1.1 |
ax7800sFdbClearSetFdb clear information. When want to clear fdb,
then set value of this MIB as 1.rw Enumeration .1.3.6.1.4.1.21839.2.2.2.3.1.1.1 |
ax7800sFdbClearReqTimeThis object indicates the most recent time that
received the demand to clear Fdb information.(sysUpTime)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.21839.2.2.2.3.1.1.2 |
ax7800sFdbClearSuccessTimeThis object indicates the time of the most recent
Fdb clearing success.(sysUpTime)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.21839.2.2.2.3.1.1.3 |
ax5400sMib OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.3 |
ax5400sSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.3.1 |
ax5400sModelTypeModel type of this system.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.1.1 |
ax5400sSoftware OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.3.1.2 |
ax5400sSoftwareNameSoftware name of this system.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.1.2.1 |
ax5400sSoftwareAbbreviationSystem software abbreviation.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.1.2.2 |
ax5400sSoftwareVersionSystem software version.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.1.2.3 |
ax5400sSystemMsg OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.3.1.3 |
ax5400sSystemMsgTextThe text of the system log message.For information about this code,
see: Operator's Manual.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.1.3.1 |
ax5400sSystemMsgTypeThe event type. For information about this code, see: Operator's Manual.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.3.1.3.2 |
ax5400sSystemMsgTimeStampThe time that event occured. And that is expressed as type of
MM/DD hh:mm:ss
MM:month(01-12)
DD:day(01-31)
hh:hour(00-23)
mm:minute(00-59)
ss:second(00-59)
Insert space between DD and hh.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.1.3.3 |
ax5400sSystemMsgLevelThe newest system message log level.For information about this code,
see: Operator's Manual.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.3.1.3.4 |
ax5400sSystemMsgEventPointThe code of part that system message error occured. For information
about this code,see: Operator's Manual.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.1.3.5 |
ax5400sSystemMsgEventInterfaceIDInterface identification of system messages. For information
about this code,see: Operator's Manual.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.1.3.6 |
ax5400sSystemMsgEventCodeEvent kind code of system messages. For information about this code,
see: Operator's Manual.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.3.1.3.7 |
ax5400sSystemMsgAdditionalCodeAdditional code of system messages. For information about this code,
see: Operator's Manual.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.3.1.3.8 |
ax5400sSnmpAgent OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.3.1.4 |
ax5400sSnmpSendReceiveSizeSNMP packet data size in Manager-to-Agent communication. The value is
displayed in bytes.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.1.4.1 |
ax5400sSnmpReceiveDelayA recommendable interval to receive packets from Manager.The value is
displayed in milliseconds.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.1.4.2 |
ax5400sSnmpContinuousSendNumber of times that is recommendable continuous transmission
packets.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.1.4.3 |
ax5400sSnmpObjectMaxNumberMax number of objects that contain SNMP packet.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.1.4.4 |
ax5400sLicense OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.3.1.6 |
ax5400sLicenseNumberThe number of the configured license serial numbers.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.1.6.1 |
ax5400sLicenseTableThe table containing the license information. SEQUENCE OF Ax5400sLicenseTableEntry .1.3.6.1.4.1.21839.2.2.3.1.6.2 |
ax5400sLicenseEntryThe entry of license information. Ax5400sLicenseTableEntry .1.3.6.1.4.1.21839.2.2.3.1.6.2.1 |
ax5400sLicenseIndexThe unique index number given for each serial number. The number is from 1 to ax5400sLicenseNumber. INTEGER .1.3.6.1.4.1.21839.2.2.3.1.6.2.1.1 |
ax5400sLicenseSerialNumberThe serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.3.1.6.2.1.2 |
ax5400sLicenseOptionNumberThe number of option licenses associated with the serial number.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.1.6.2.1.3 |
ax5400sLicenseOptionTableThe table containing option licenses information associated with the serial number. SEQUENCE OF Ax5400sLicenseOptionTableEntry .1.3.6.1.4.1.21839.2.2.3.1.6.3 |
ax5400sLicenseOptionEntryThe entry of the option license information associated with the serial number. Ax5400sLicenseOptionTableEntry .1.3.6.1.4.1.21839.2.2.3.1.6.3.1 |
ax5400sLicenseOptionIndexThe unique index number given for each serial number. The same number as ax5400sLicenseIndex. INTEGER .1.3.6.1.4.1.21839.2.2.3.1.6.3.1.1 |
ax5400sLicenseOptionNumberIndexThe unique index number of option licenses information which is given for each serial number. The number is from 1 to ax5400sLicenseNumber. INTEGER .1.3.6.1.4.1.21839.2.2.3.1.6.3.1.2 |
ax5400sLicenseOptionSoftwareNameThe software model name of the option license information associated with the serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.3.1.6.3.1.3 |
ax5400sLicenseOptionSoftwareAbbreviationThe software abbreviated name of the option license information associated with the serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.3.1.6.3.1.4 |
ax5400sDevice OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.3.2 |
ax5400sChassis OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.3.2.1 |
ax5400sChassisMaxNumberMax number of cluster chassis that can connect to this router.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.1.1 |
ax5400sChassisTableA table containing chassis information. SEQUENCE OF Ax5400sChassisTableEntry .1.3.6.1.4.1.21839.2.2.3.2.1.2 |
ax5400sChassisEntryAn entry containing specific chassis. Ax5400sChassisTableEntry .1.3.6.1.4.1.21839.2.2.3.2.1.2.1 |
ax5400sChassisIndexA number to specify ax5400sChassisEntry. INTEGER .1.3.6.1.4.1.21839.2.2.3.2.1.2.1.1 |
ax5400sChassisTypeChassis type of this system.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.1.2.1.2 |
ax5400sChassisStatusCurrent status of this chassis.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.1.2.1.3 |
ax5400sBcuBoardDuplexModeDuplex mode of BCU Board.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.1.2.1.4 |
ax5400sPowerUnitNumberNumber of maximum power switches that this router can connect its.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.1.2.1.5 |
ax5400sFanNumberThe maximum number of fans that can connect to this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.1.2.1.6 |
ax5400sCifNumberNumber of cluster interfaces that can connect to this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.1.2.1.7 |
ax5400sBcuBoardNumberNumber of BCU boards that can connect to
this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.1.2.1.8 |
ax5400sBsuBoardNumberNumber of Bsu boards that can connect to
this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.1.2.1.9 |
ax5400sNifBoardNumberNumber of NIF(Network InterFace) boards that can connect to
this chassis.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.1.2.1.10 |
ax5400sChassisMacAddressThe Media Access Control Address of this chassis.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.3.2.1.2.1.11 |
ax5400sChassisSerialNumberManagement information (SerialNumber) of this chassis.
Its length is zero if not implemented or closed.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.2.1.2.1.12 |
ax5400sPowerUnitTableA table containing power unit information. SEQUENCE OF Ax5400sPowerUnitTableEntry .1.3.6.1.4.1.21839.2.2.3.2.1.3 |
ax5400sPowerUnitEntryAn entry containing power unit information. Ax5400sPowerUnitTableEntry .1.3.6.1.4.1.21839.2.2.3.2.1.3.1 |
ax5400sPowerUnitIndexA number to position of the power units.The value from 1
to ax5400sPowerUnitNumber. INTEGER .1.3.6.1.4.1.21839.2.2.3.2.1.3.1.1 |
ax5400sPowerConnectStatusThe current connection status of the power unit.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.1.3.1.2 |
ax5400sPowerSupplyStatusStatus of power supply. The value is -1 when Power Supply is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.1.3.1.3 |
ax5400sFanTableA table containing fan information. SEQUENCE OF Ax5400sFanTableEntry .1.3.6.1.4.1.21839.2.2.3.2.1.4 |
ax5400sFanEntryThis entry containing information for a fan. Ax5400sFanTableEntry .1.3.6.1.4.1.21839.2.2.3.2.1.4.1 |
ax5400sFanIndexIndex to indicate position of fans. INTEGER .1.3.6.1.4.1.21839.2.2.3.2.1.4.1.1 |
ax5400sFanStatusStatus of fans.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.1.4.1.2 |
ax5400sBcuBoard OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.3.2.2 |
ax5400sBcuBoardTableA table containing BCU boards information. SEQUENCE OF Ax5400sBcuBoardTableEntry .1.3.6.1.4.1.21839.2.2.3.2.2.1 |
ax5400sBcuBoardEntryAn entry containing BCU boards about specific
chassis. Ax5400sBcuBoardTableEntry .1.3.6.1.4.1.21839.2.2.3.2.2.1.1 |
ax5400sBcuBoardIndexPosition information of the BCU slot. The value is from 1 to
ax5400sBcuBoardCardNumber. INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.1 |
ax5400sBcuIoBoardTypeBCU IO board ID.
The value is -1 when BCU board is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.2 |
ax5400sBcuCpuBoardTypeThe value of BCU board ID.
The value is -1 when BCU board is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.3 |
ax5400sBcuOperStatusStatus of LED on BCU board. The value is 32 when BCU board is
disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.4 |
ax5400sBcuOperModeStatusOperate status on BCU board. The value is -1 when BCU board is
disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.5 |
ax5400sBcuActiveLedStatusStatus of ACTIVE LED on BCU board. The value is -1 when BCU board is
disconnected or LED status is unknown.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.6 |
ax5400sBcuReadyLedStatusStatus of READY LED on BCU board. The value is -1 when BCU board is
disconnected or LED status is unknown.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.7 |
ax5400sBcuAlarmLedStatusStatus of ALARM LED on BCU board. The value is -1 when BCU board is
disconnected or LED status is unknown.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.8 |
ax5400sBcuErrorLedStatusStatus of LED ERROR on BCU board. The value is -1 when BCU board is
disconnected or LED status is unknown.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.9 |
ax5400sBcuEmaLedStatusStatus of LED EMA READY on BCU board. The value is -1 when BCU board is
disconnected or LED status is unknown.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.10 |
ax5400sBcuMgmtPortStatusThe status of remote management port.
The value is -1 when BCU board is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.12 |
ax5400sBcuMaintenancePortStatusThe status of maintenance port.
The value is -1 when BCU board is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.13 |
ax5400sBcuAtaCardNumberNumber of slots in ATA card. The value is 0 when BCU board is
disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.14 |
ax5400sBcuAtaBootDevThe value of ATA slots number when router booted. The value is -1
when BCU board is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.15 |
ax5400sBcuBoardNameThe product name of RM-IO board.When BCU board is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.16 |
ax5400sBcuBoardAbbreviationThe abbreviation name of RM-IO board.When BCU board is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.17 |
ax5400sBcuIoBoardProductCodeThe manufacturing management number of BCU-IO board.The value is
-1 when BCU board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.18 |
ax5400sBcuCpuBoardProductCodeThe manufacturing management number of BCU-CPU board.The value is
-1 when BCU board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.19 |
ax5400sBcuRmCpuNameThe CPU name of board that load BCU.When BCU board is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.20 |
ax5400sBcuRmCpuClockThe CPU clock of board that load BCU. The value is displayed in
mega-hertz(MHz). The value is -1 when BCU board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.21 |
ax5400sBcuRmMemoryTotalSizeTotal memory sizes of BCU. The value is displayed in kilobyte(KB).
The value is -1 when BCU board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.22 |
ax5400sBcuRmMemoryUsedSizeUsing memory sizes of BCU. The value is displayed in kilobyte(KB).
The value is -1 when BCU board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.23 |
ax5400sBcuRmMemoryFreeSizeFree memory sizes of BCU. The value is displayed in kilobyte(KB).
The value is -1 when BCU board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.24 |
ax5400sBcuRmRomVersionThe version of Rom on BCU board. When BCU board is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.25 |
ax5400sBcuRmCpuLoad1mThe average, over the last minute, of the percentage of time that
this processor was utilized to processing and transfer data.
The value is 0 when BCU board is standby or disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.26 |
ax5400sBcuTemperatureStatusNumberThe maximum number of ax5400sTemperatureStatus that can be measurement at this chassis.
The value is 0 when BCU board doesn't support the temperature measurement function or BCU board is disconnectedro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.27 |
ax5400sBcuCpOperStatusThe state of CP. other(1),Under Operation(2),Initializing(3),Fault(4),Standby system BCU not implemented(32)ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.28 |
ax5400sBcuCpCpuNameThe character sequence of the CPU name whose number is a maximum of 16.(ex : MIPS RM5261).Return length 0 if standby system BCR not implemented.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.29 |
ax5400sBcuCpCpuClockThe numerical value of a CP CPU clock. unit of measure: MHz (ex:250), it is -1 if standby system BCU not implemented.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.30 |
ax5400sBcuCpMemoryTotalSizeThe numerical value of the main memory size of CP. Unit of measure : KByte,(ex : 32768)ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.31 |
ax5400sBcuCpCpuLoad1mThe numerical value(1-100) of CP CPU activity ratio for a minute.If the state of CP is not Under Operation, return 0. If standby system BCU is not implemented return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.32 |
ax5400sBcuSerialNumberThe character string of the card management information of BCU package whose number is a maximum of 30. Its length is zero if not implemented or closed.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.33 |
ax5400sBcuVoltage150The numerical value of the voltage at the observation point of 1.5V voltage. Unit of measure : 10mV (ex : 148)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.34 |
ax5400sBcuVoltage180The numerical value of the voltage at the observation point of 1.8V voltage. Unit of measure : 10mV (ex : 183)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.35 |
ax5400sBcuVoltage250The numerical value of the voltage at the observation point of 2.5V voltage. Unit of measure : 10mV (ex : 250)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.36 |
ax5400sBcuVoltage330The numerical value of the voltage at the observation point of 3.3V voltage. Unit of measure : 10mV (ex : 328)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.37 |
ax5400sBcuVoltage500The numerical value of the voltage at the observation point of 5V voltage. Unit of measure : 10mV (ex : 493)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.38 |
ax5400sBcuVoltage330-2The numerical value of the voltage at the observation point of 3.3V voltage. Unit of measure : 10mV (ex : 328)
Return length 0 if standby system BCU not implemented or closed.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.1.1.46 |
ax5400sAtaCardTableA table containing ATA Card information. SEQUENCE OF Ax5400sAtaCardTableEntry .1.3.6.1.4.1.21839.2.2.3.2.2.2 |
ax5400sAtaCardEntryAn entry containing ATA Card information. Ax5400sAtaCardTableEntry .1.3.6.1.4.1.21839.2.2.3.2.2.2.1 |
ax5400sAtaCardIndexConnected position of ATA cards.The value is 1 plus slot number
that ATA card is inserted.The value is from 1 to ax5400sBcuAtaCardNumber. INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.2.1.1 |
ax5400sAtaCardConnectionConnected status of ATA cards.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.2.2.1.2 |
ax5400sAtaCardTotalSizeTotal capacity of ATA cards.The value is displayed in kilobyte
(kbyte).And the value is -1 when ATA cards is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.2.1.3 |
ax5400sAtaCardUsedSizeUsing capacity of ATA cards.The value is displayed in kilobyte
(kbyte).And the value is -1 when ATA cards is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.2.1.4 |
ax5400sAtaCardFreeSizeThe rest capacity of ATA card. The value is displayed in kilobyte
(kbyte). The value is -1 when ATA card is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.2.1.5 |
ax5400sAtaCardNameThe product name of ATA card. When the ATA card is unknown,
this OCTET STRING value is 'unknown'. When ATA card is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.2.2.2.1.6 |
ax5400sAtaCardAbbreviationThe kind of ATA card. When ATA card is disconnected,this will be an
OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.2.2.2.1.7 |
ax5400sAtaCardMountStatusThe mount state of ATA card. The value is -1 when ATA card is
disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.2.2.1.8 |
ax5400sTemperatureStatusTableThe table of ambient temperature status maintained by the
environmental monitor. SEQUENCE OF Ax5400sTemperatureStatusEntry .1.3.6.1.4.1.21839.2.2.3.2.2.3 |
ax5400sTemperatureStatusEntryAn entry in the ambient temperature status table, representing
the status of the associated testpoint maintained by the
environmental monitor. Ax5400sTemperatureStatusEntry .1.3.6.1.4.1.21839.2.2.3.2.2.3.1 |
ax5400sTemperatureStatusIndexUnique index for the testpoint being instrumented.
This index is for SNMP purposes only, and has no
intrinsic meaning. INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.3.1.1 |
ax5400sTemperatureStatusDescrTextual description of the testpoint being instrumented.
This description is a short textual label, suitable as a
human-sensible identification for the rest of the
information in the entry.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.2.2.3.1.2 |
ax5400sTemperatureStatusValueThe current measurement of the testpoint being instrumented.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.3.1.3 |
ax5400sTemperatureThresholdThe highest value that the associated instance of the
object ax5400sTemperatureStatusValue may obtain
before an emergency shutdown of the managed device is
initiated.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.2.3.1.4 |
ax5400sTemperatureStateThe current state of the testpoint being instrumented.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.2.3.1.5 |
ax5400sSopTableA table containing SOP information. SEQUENCE OF Ax5400sSopEntry .1.3.6.1.4.1.21839.2.2.3.2.2.4 |
ax5400sSopEntryAn entry containing SOP information. Ax5400sSopEntry .1.3.6.1.4.1.21839.2.2.3.2.2.4.1 |
ax5400sSopAlarmLevelError level displayed on a SOP window. When the BCU does not
support SOP, this will be an OCTET STRING of zero length.
For information about this code, see: Operator's Manual.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.3.2.2.4.1.1 |
ax5400sSopAlarmEventPointThe code displayed on a SOP window, which stands for a device
part of the factor of the alarm message. When the BCU does not
support SOP, this will be an OCTET STRING of zero length.
For information about this code, see: Operator's Manual.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.3.2.2.4.1.2 |
ax5400sSopAlarmEventCodeEvent kind code of alarm message displayed on a SOP window.
When the BCU does not support SOP, this will be an OCTET STRING
of zero length. For information about this code, see: Operator's
Manual.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.3.2.2.4.1.3 |
ax5400sSopAlarmEventInterfaceIDInterface identification of alarm messages on a SOP window.
When the BCU does not support SOP, this will be an OCTET STRING
of zero length. For information about this code, see: Operator's
Manual.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.3.2.2.4.1.4 |
ax5400sSopAlarmMsgTextThe text of the alarm message on a SOP window. When the BCU does
not support SOP, this will be an OCTET STRING of zero length.
For more information about this code, see: Operator's Manual.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.21839.2.2.3.2.2.4.1.5 |
ax5400sBsuBoard OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.3.2.3 |
ax5400sBsuBoardTableA table containing BSU boards information about
specific chassis. SEQUENCE OF Ax5400sPpuBoardTableEntry .1.3.6.1.4.1.21839.2.2.3.2.3.1 |
ax5400sBsuBoardEntryAn entry containing BSU boards about specific
chassis. Ax5400sPpuBoardTableEntry .1.3.6.1.4.1.21839.2.2.3.2.3.1.1 |
ax5400sBsuBoardIndexPosition information of the BSU slots. The value is from 1 to
ax5400sBsuBoardNumber. INTEGER .1.3.6.1.4.1.21839.2.2.3.2.3.1.1.1 |
ax5400sBsuBoardTypeBSU boards ID.
The value is -1 when BSU board is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.3.1.1.2 |
ax5400sBsuOperStatusOperation stasus of BSU board.(STATUS LED)ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.3.1.1.3 |
ax5400sBsuOperModeStatusOperate status on BSU board. The value is -1 when BSU board is
disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.3.1.1.4 |
ax5400sBsuBoardNameBSU board name. When BSU board is disconnected, this will be an OCTET
STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.2.3.1.1.5 |
ax5400sBsuBoardAbbreviationThe abbreviation name of BSU board. When BSU board is disconnected,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.2.3.1.1.6 |
ax5400sBsuBoardProductCodeThe revision of BSU board. When BSU board is disconnected,
this will be -1.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.3.1.1.7 |
ax5400sBsuSerialNumberThe character string of the card management information of BSU package whose number is a maximum of 30. Its length is zero if not implemented or closed.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.2.3.1.1.8 |
ax5400sBsuVoltage120The numerical value of the voltage at the observation point of 1.2V voltage. Unit of measure : 10mV (ex : 148) .If BSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.3.1.1.9 |
ax5400sBsuVoltage150The numerical value of the voltage at the observation point of 1.5V voltage. Unit of measure : 10mV (ex : 148) .If BSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.3.1.1.10 |
ax5400sBsuVoltage180The numerical value of the voltage at the observation point of 1.8V voltage. Unit of measure : 10mV (ex : 183) .If BSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.3.1.1.11 |
ax5400sBsuVoltage250The numerical value of the voltage at the observation point of 2.5V voltage. Unit of measure : 10mV (ex : 250) .If BSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.3.1.1.12 |
ax5400sBsuVoltage330The numerical value of the voltage at the observation point of 3.3V voltage. Unit of measure : 10mV (ex : 328) .If BSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.3.1.1.13 |
ax5400sBsuVoltage500The numerical value of the voltage at the observation point of 5V voltage. Unit of measure : 10mV (ex : 493) .If BSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.3.1.1.14 |
ax5400sBsuVoltage150-2The numerical value of the voltage at the observation point of 1.5V voltage. Unit of measure : 10mV (ex : 148) .If BSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.3.1.1.22 |
ax5400sBsuVoltage250-2The numerical value of the voltage at the observation point of 2.5V voltage. Unit of measure : 10mV (ex : 250) .If BSU is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.3.1.1.23 |
ax5400sNifBoard OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.3.2.4 |
ax5400sNifBoardTableA table containing Network Interface cards (NIF) information that
slot is loaded. SEQUENCE OF Ax5400sNifBoardTableEntry .1.3.6.1.4.1.21839.2.2.3.2.4.1 |
ax5400sNifBoardEntryAn entry containing NIF information about specific chassis. Ax5400sNifBoardTableEntry .1.3.6.1.4.1.21839.2.2.3.2.4.1.1 |
ax5400sNifBoardSlotIndexPosition information of NIF loading slot. The value is from 1
to ax5400sNifBoardNumber. INTEGER .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.1 |
ax5400sNifBoardTypeType of connecting package.The value is register value of NIF package.
other (1),
48-port-10BASE-T:100BASE-TX(32880),
6-port-1000BASE-GBIC(32884)
The value is -1 when BSU is disconnected or NIF disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.2 |
ax5400sNifBoardOperStatusOperation status of Network InterFace(NIF) board.(STATUS LED)ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.3 |
ax5400sNifBoardNameNetwork InterFace(NIF) board name. When BSU board or NIF board is
disconnected,this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.4 |
ax5400sNifBoardAbbreviationThe abbreviation name of Network InterFace(NIF) board. When BSU board
or NIF board is disconnected, this will be an OCTET STRING of zero
length.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.5 |
ax5400sNifBoardProductCodeThe product management code of Network InterFace(NIF) board.The value
is -1 when BSU board or NIF board is disconncted.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.6 |
ax5400sNifPhysLineNumberNumber of Network InterFace(NIF)'s physical port.The max is 12.
The value is -1 when value of ax5400sNifCardType is -1 or other(1).ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.7 |
ax5400sNifSerialNumberManagement information (SerialNumber) of Network InterFace(NIF) package.
It shows by the character string of 30 characters or less.
When BSU board responds and things except UP or NIF board is disconnected or closed,
this will be an OCTET STRING of zero length.ro DisplayString .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.8 |
ax5400sNifVoltageAM520The numerical value of the voltage at the observation point of -5.2V voltage. Unit of measure : 10mV (ex : -512) .If BSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.9 |
ax5400sNifVoltage150The numerical value of the voltage at the observation point of 1.5V voltage. Unit of measure : 10mV (ex : 148) .If BSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.10 |
ax5400sNifVoltage180The numerical value of the voltage at the observation point of 1.8V voltage. Unit of measure : 10mV (ex : 183) .If BSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.11 |
ax5400sNifVoltageA180The numerical value of the voltage at the observation point of analog 1.8V voltage. Unit of measure : 10mV (ex : 183) .If BSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.12 |
ax5400sNifVoltage250The numerical value of the voltage at the observation point of analogu 2.5V voltage. Unit of measure : 10mV (ex : 250) .If BSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.13 |
ax5400sNifVoltage330The numerical value of the voltage at the observation point of analogu 3.3V voltage. Unit of measure : 10mV (ex : 328) .If BSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.14 |
ax5400sNifVoltageA330The numerical value of the voltage at the observation point of analog 3.3V voltage. Unit of measure : 10mV (ex : 328) .If BSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.15 |
ax5400sNifVoltageA500The numerical value of the voltage at the observation point of analog 5V voltage. Unit of measure : 10mV (ex : 493) .If BSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.16 |
ax5400sNifVoltage120The numerical value of the voltage at the observation point of 1.2V voltage. Unit of measure : 10mV (ex : 118) .If BSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.19 |
ax5400sNifVoltage330-2The numerical value of the voltage at the observation point of .3.V voltage. Unit of measure : 10mV (ex : 328) .If BSU or NIF is closed or not implemented, return 0.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.4.1.1.22 |
ax5400sPhysLine OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.3.2.5 |
ax5400sPhysLineTableA table containing physical port information. SEQUENCE OF Ax5400sPhysLineTableEntry .1.3.6.1.4.1.21839.2.2.3.2.5.1 |
ax5400sPhysLineEntryAn entry containing physical port. Ax5400sPhysLineTableEntry .1.3.6.1.4.1.21839.2.2.3.2.5.1.1 |
ax5400sPhysLineIndexPhysical port number. The value is from 1 to ax5400sNifLineNumber. INTEGER .1.3.6.1.4.1.21839.2.2.3.2.5.1.1.1 |
ax5400sPhysLineConnectorTypeConnector type is connected physical port. The value is 1(other)
when connector is disconnected or connector type is unknown.When
displaying in pannel, requests board name of NIF,then will display it.
The value is -1 when BSU or NIF board is disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.5.1.1.2 |
ax5400sPhysLineOperStatusStatus of physical port. The value is -1 when BSU or NIF board is
disconnected.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.5.1.1.3 |
ax5400sPhysLineIfIndexNumberNumber of ifIndex which is included in physical port.The value is -1
when BSU board or NIF board is disconnected.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.5.1.1.4 |
ax5400sPhysLineTransceiverStatusType and status of replaceable transceiver.ro Enumeration .1.3.6.1.4.1.21839.2.2.3.2.5.1.1.5 |
ax5400sInterface OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.3.2.6 |
ax5400sLineIfTableA table containing physical port correspond to ifIndex. SEQUENCE OF Ax5400sLineIfTableEntry .1.3.6.1.4.1.21839.2.2.3.2.6.1 |
ax5400sLineIfEntryAn entry containing ifIndex is assigned to physical port. Ax5400sLineIfTableEntry .1.3.6.1.4.1.21839.2.2.3.2.6.1.1 |
ax5400sLineIfIndexThe value of ifIndex to distinguish entry of this table.The value is
from 1 to ax5400sPhysLineIfIndexNumber. INTEGER .1.3.6.1.4.1.21839.2.2.3.2.6.1.1.1 |
ax5400sIfIndexThe value of ifIndex which is assigned to this physical port.
The value is 0 when ifIndex is not assigned to this physical port.ro INTEGER .1.3.6.1.4.1.21839.2.2.3.2.6.1.1.2 |
ax5400sIfIpAddressThe IP address correspond to ifIndex which is assigned to this
physical port. If IP address is not assigned, it is '0.0.0.0'.ro IpAddress .1.3.6.1.4.1.21839.2.2.3.2.6.1.1.3 |
ax5400sIfIpv6AddressThe IPv6 address correspond to ifIndex which is assigned to this
physical port. If IPv6 address is not assigned,
it is '00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00'.ro OCTET STRING .1.3.6.1.4.1.21839.2.2.3.2.6.1.1.4 |
ax5400sManagementMIB OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.3.3 |
ax5400sOperationCommand OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.3.3.1 |
ax5400sFdbClearMIB OBJECT IDENTIFIER .1.3.6.1.4.1.21839.2.2.3.3.1.1 |
ax5400sFdbClearSetFdb clear information. When want to clear fdb,
then set value of this MIB as 1.rw Enumeration .1.3.6.1.4.1.21839.2.2.3.3.1.1.1 |
ax5400sFdbClearReqTimeThis object indicates the most recent time that
received the demand to clear Fdb information.(sysUpTime)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.21839.2.2.3.3.1.1.2 |
ax5400sFdbClearSuccessTimeThis object indicates the time of the most recent
Fdb clearing success.(sysUpTime)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.21839.2.2.3.3.1.1.3 |