ATMSWCH-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ATMSWCH-MIB.
109
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
109 total| Object Name |
|---|
atmSwch OBJECT IDENTIFIER .1.3.6.1.4.1.81.33 |
IMPORTS Unknown .1.3.6.1.4.1.81.33 |
atmSwchBase OBJECT IDENTIFIER .1.3.6.1.4.1.81.33.1 |
atmSwchBaseCurrentPrefixThe ATM prefix currently in use for the switch.ro AtmPrefix .1.3.6.1.4.1.81.33.1.1 |
atmSwchBaseConfigPrefixThe ATM prefix to be used at the next reboot.rw AtmPrefix .1.3.6.1.4.1.81.33.1.2 |
atmSwchBaseEpdThresholdThe percentage of the maximum buffer allocation used in
the switch fabric before EPD is invoked. Default is 80%.rw INTEGER .1.3.6.1.4.1.81.33.1.3 |
atmSwchBaseAmonAdminStateThis enable or disable the AMON statistics gathering
in the switch. For Some applications, like Host Statistics,
you also need to create a Control Table in order to start the
statistics gatheringrw Enumeration .1.3.6.1.4.1.81.33.1.4 |
atmSwchCpu OBJECT IDENTIFIER .1.3.6.1.4.1.81.33.2 |
atmSwchCpuTableA table containing information about each CPU in the hub SEQUENCE OF AtmSwchCpuEntry .1.3.6.1.4.1.81.33.2.1 |
atmSwchCpuEntryAn entry containing information about a particular
CPU in the hub AtmSwchCpuEntry .1.3.6.1.4.1.81.33.2.1.1 |
atmSwchCpuIndexIndex into this table.ro INTEGER .1.3.6.1.4.1.81.33.2.1.1.1 |
atmSwchCpuHwVersionCPU Hardware version. Stored in the format :-
first Byte - hardware major version number
- hardware minor version number
last Byte - hardware debug version number.ro OCTET STRING .1.3.6.1.4.1.81.33.2.1.1.2 |
atmSwchCpuSoftErrCodeSoftware Error Code. This variable contain a copy of the error
code of the last event to have a trap sent.ro INTEGER .1.3.6.1.4.1.81.33.2.1.1.3 |
atmSwchCpuSoftErrStringSoftware Error Description. This variable contain a copy of the
error string of the last event to have a trap sent.ro DisplayString .1.3.6.1.4.1.81.33.2.1.1.4 |
atmSwchCpuUtilizationAn estimate of the current CPU utilization in
one-hundredths of a percent.ro INTEGER .1.3.6.1.4.1.81.33.2.1.1.5 |
atmSwchCpuRamSizeDRAM plus SIMM size on the processor board, in bytesro Gauge32 .1.3.6.1.4.1.81.33.2.1.1.6 |
atmSwchCpuRamUsedAn estimate of the amount of DRAM plus SIMM
currently in use, in bytes.ro Gauge32 .1.3.6.1.4.1.81.33.2.1.1.7 |
atmSwchCpuFlashSizeFlash memory size, in bytes.ro Gauge32 .1.3.6.1.4.1.81.33.2.1.1.8 |
atmSwchCpuFlashUsedFlash memory used, in bytes.ro Gauge32 .1.3.6.1.4.1.81.33.2.1.1.9 |
atmSwchCpuEepromSizeEEPROM memory size, in bytes.ro Gauge32 .1.3.6.1.4.1.81.33.2.1.1.10 |
atmSwchCpuEepromUsedEEPROM memory used, in bytes.ro Gauge32 .1.3.6.1.4.1.81.33.2.1.1.11 |
atmSwchCpuTimeHost time measured in seconds since midnight,
1st January, 1970.rw INTEGER .1.3.6.1.4.1.81.33.2.1.1.12 |
atmSwchCpuSysUpTimeThe time (in hundredths of a second) since the
network management portion of the module was last
re-initialized.
This is like the MIB-2 sysUpTime but for a specific module.
In the Master Agent it should be equal to sysUpTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.81.33.2.1.1.13 |
atmSwchCpuSvcPtPtInConnsThe number of switched virtual point to point
connections through this port, where this
port is the point of entry for the call setup.ro INTEGER .1.3.6.1.4.1.81.33.2.1.1.14 |
atmSwchCpuSvcPtPtOutConnsThe number of switched virtual point to point
connections through this port, where this
port is the point of exit for the call setup.ro INTEGER .1.3.6.1.4.1.81.33.2.1.1.15 |
atmSwchCpuSvcPtMptRootConnsThe number of switched virtual point to multipoint
connections through this port, where this
port is the point of entry for the call setup.ro INTEGER .1.3.6.1.4.1.81.33.2.1.1.16 |
atmSwchCpuSvcPtMptLeafConnsThe number of switched virtual point to multipoint
connections through this port, where this
port is the point of exit for the call setup.ro INTEGER .1.3.6.1.4.1.81.33.2.1.1.17 |
atmSwchCpuPvcPtPtConnsThe number of permanent virtual point to point
connections through this port.ro INTEGER .1.3.6.1.4.1.81.33.2.1.1.18 |
atmSwchSlot OBJECT IDENTIFIER .1.3.6.1.4.1.81.33.5 |
atmSwchSlotTableA table containing information about each slot in
the switch. SEQUENCE OF AtmSwchSlotEntry .1.3.6.1.4.1.81.33.5.1 |
atmSwchSlotEntryAn entry containing information about a particular
slot in the switch. AtmSwchSlotEntry .1.3.6.1.4.1.81.33.5.1.1 |
atmSwchSlotIndexIndex into this table, by slot number.ro INTEGER .1.3.6.1.4.1.81.33.5.1.1.1 |
atmSwchSlotRxCellDiscardscell discard counter for the Rx path (line to switch).ro INTEGER .1.3.6.1.4.1.81.33.5.1.1.2 |
atmSwchSlotRouteNextIdThe next available Route index in this Slot.
The value of this object can be used as the index by the
network manager to create an entry in the atmSwchSlotRouteTable.ro INTEGER .1.3.6.1.4.1.81.33.5.1.1.3 |
atmSwchSlotAPSModeThe operation mode of APS.
Uni-directional:
The uni-directional mode provides protection in
one direction.
Non-revertive:
When the condition that caused a switch to the protection
line has been cleared, a non-revertive system remains on the
Protection line until another switch request is received.ro Enumeration .1.3.6.1.4.1.81.33.5.1.1.4 |
atmSwchSlotAPSCurrentStateCurrent state of APS.
Sd A signal degrade condition is in effect.
Sf A signal failure condition is in effect.
Forced switched The current APS transmitting link is a result of a forced switched command
Manual Switched The current APS transmitting link is a result of a manual switched command.
DoNotRevert Working channel repaired.
NoAPS Protection line is not available.
notActive No available channels.ro Enumeration .1.3.6.1.4.1.81.33.5.1.1.5 |
atmSwchSlotAPSSwitchCommandAllows the initiation of an APS switch command.
The Switch command values are:
noCmd(1)
This value should be returned by a read request when no switch
Command has been written to APS since the last Non-Volatile
Memory reset. This value may not be used in a write operation.
clear(2)
Clears all of the switch commands listed below.
forcedSwitchWorkToProtect(3)
Switches from the working link to the protection link.
This command has higher priority over the manual switch commands.
forcedSwitchProtectToWork(5)
Switches from the protection link to the working link.
This command has higher priority over the manual switch commands.
manualSwitchWorkToProtect(6)
Switches the working link to the protection link.
manualSwitchProtectToWork(7)
Switches from the protection link to the working link.
When read this object returns the last command written
or noCmd(1) if no command has been written since the last
Non-Volatile Memory reset. The return of the last command
written does not imply that this command is currently in effect.
This request may have been preempted by a higher priority
local or remote request. In order to determine the
current state of the APS group it is necessary to read
the object atmSwchSlotAPSCurrentState.rw Enumeration .1.3.6.1.4.1.81.33.5.1.1.6 |
atmSwchSlotAPSSFBerThresholdThe Signal Failure Bit Error Rate.
The negated value of this number is used as the exponent of
10 for computing the threshold value for the Bit Error Rate
(BER). For example, a value of 5 indicates a BER threshold of
10^-5.
Default value is 5.ro INTEGER .1.3.6.1.4.1.81.33.5.1.1.7 |
atmSwchSlotAPSSDBerThresholdThe Signal Degrade Bit Error Rate.
The negated value of this number is used as the exponent of
10 for computing the threshold value for the Bit Error Rate
(BER). For example, a value of 5 indicates a BER threshold of
10^-5.
Default value is 5.rw INTEGER .1.3.6.1.4.1.81.33.5.1.1.8 |
atmSwchSlotAPSDecisionAPS Decision.
The receiving link can be either the working link
or the protection link. When both links are down,
Not-active value is returned.ro Enumeration .1.3.6.1.4.1.81.33.5.1.1.9 |
atmSwchPort OBJECT IDENTIFIER .1.3.6.1.4.1.81.33.6 |
atmSwchPortTableA table containing information about all the physical
ports on the switch. Indexed on atmSwchSlotIndex and
atmSwchPortIndex. SEQUENCE OF AtmSwchPortEntry .1.3.6.1.4.1.81.33.6.1 |
atmSwchPortEntryAn entry containing information about a port on
a particular card in the switch. AtmSwchPortEntry .1.3.6.1.4.1.81.33.6.1.1 |
atmSwchPortIndexThe index of this port within the card.ro INTEGER .1.3.6.1.4.1.81.33.6.1.1.1 |
atmSwchPortRootVportIndexThe index of the root vport in the vport table.ro INTEGER .1.3.6.1.4.1.81.33.6.1.1.2 |
atmSwchPortNumVPortsThe count of the number of Vports on this physical
port.ro INTEGER .1.3.6.1.4.1.81.33.6.1.1.3 |
atmSwchPortPayloadScramblePayload Scramble for a port.rw Enumeration .1.3.6.1.4.1.81.33.6.1.1.4 |
atmSwchPortPhysicalTypeThis variable identifies whether a SONET or a
SDH signal is used across this interface.rw Enumeration .1.3.6.1.4.1.81.33.6.1.1.5 |
atmSwchPortMaxTxRateThe Maximum transmit rate (in 1000bits per
second) for that port.rw INTEGER .1.3.6.1.4.1.81.33.6.1.1.6 |
atmSwchPortSvcPtPtInConnsThe number of switched virtual point to point
connections through this port, where this
port is the point of entry for the call setup.ro INTEGER .1.3.6.1.4.1.81.33.6.1.1.7 |
atmSwchPortSvcPtPtOutConnsThe number of switched virtual point to point
connections through this port, where this
port is the point of exit for the call setup.ro INTEGER .1.3.6.1.4.1.81.33.6.1.1.8 |
atmSwchPortSvcPtMptRootConnsThe number of switched virtual point to multipoint
connections through this port, where this
port is the point of entry for the call setup.ro INTEGER .1.3.6.1.4.1.81.33.6.1.1.9 |
atmSwchPortSvcPtMptLeafConnsThe number of switched virtual point to multipoint
connections through this port, where this
port is the point of exit for the call setup.ro INTEGER .1.3.6.1.4.1.81.33.6.1.1.10 |
atmSwchPortPvcPtPtConnsThe number of permanent virtual point to point
connections through this port.ro INTEGER .1.3.6.1.4.1.81.33.6.1.1.11 |
atmSwchPortPvcPtMptRootConnsThe number of permanent virtual point to multipoint
connections through this port, where this
port is the point of entry for the call setup.ro INTEGER .1.3.6.1.4.1.81.33.6.1.1.12 |
atmSwchPortPvcPtMptLeafConnsThe number of permanent virtual point to multipoint
connections through this port, where this
port is the point of exit for the call setup.ro INTEGER .1.3.6.1.4.1.81.33.6.1.1.13 |
atmSwchPortPvpPtPtConnsThe number of permanent virtual point to point
path connections through this port.ro INTEGER .1.3.6.1.4.1.81.33.6.1.1.14 |
atmSwchPortPvpPtMptRootConnsThe number of permanent virtual point to multi-point
root path connections through this port.ro INTEGER .1.3.6.1.4.1.81.33.6.1.1.15 |
atmSwchPortPvpPtMptLeafConnsThe number of permanent virtual point to multi-point
leaf path connections through this port.ro INTEGER .1.3.6.1.4.1.81.33.6.1.1.16 |
atmSwchPortdsx3CellMapingThis variable describes two different mapping schemes
for transporting ATM cells over DS3 transmission
systems: a PLCP-based system and a direct mapping
system (ADM - Atm Direct Mapping).
The two mappings are not compatible although both use
DS3 as the underlying transmission system.
Default value is ADM.rw Enumeration .1.3.6.1.4.1.81.33.6.1.1.17 |
atmSwchVPort OBJECT IDENTIFIER .1.3.6.1.4.1.81.33.7 |
atmSwchVPortTableA table containing information about all the virtual
ports on the switch. Indexed on atmSwchSlotIndex,
atmSwchPortIndex and atmSwchVPortIndex. SEQUENCE OF AtmSwchVPortEntry .1.3.6.1.4.1.81.33.7.1 |
atmSwchVPortEntryAn entry containing information about a VPort on
a particular card in a switch. AtmSwchVPortEntry .1.3.6.1.4.1.81.33.7.1.1 |
atmSwchVPortIndexThe index of this vport within the card/port.
This is defined as being the vport identifier + 1.ro INTEGER .1.3.6.1.4.1.81.33.7.1.1.1 |
atmSwchVPortIsRootIndicates whether this Vport is the root vport on a
given physical port.ro Enumeration .1.3.6.1.4.1.81.33.7.1.1.2 |
atmSwchVPortAdminStatusThe admin state of this interface. Note that an
interface must be down in order to change the
configuration of that interface.rw Enumeration .1.3.6.1.4.1.81.33.7.1.1.3 |
atmSwchVPortOperStatusThe operational state of this interface. Note that an
interface must be down in order to change the
configuration of that interface.ro Enumeration .1.3.6.1.4.1.81.33.7.1.1.4 |
atmSwchVPortCurrentSignallingStateThe state of the signalling stack for this interface.ro Enumeration .1.3.6.1.4.1.81.33.7.1.1.5 |
atmSwchVPortCurrentILMIStateThe current state of the ILMI link for this port.
stack_off means the ILMI link is up but the protocol
stack that retrieves neighbor information is off.ro Enumeration .1.3.6.1.4.1.81.33.7.1.1.6 |
atmSwchVPortCurrentAddrRegEnIndicates whether address registration is enabled
on this interface.ro Enumeration .1.3.6.1.4.1.81.33.7.1.1.7 |
atmSwchVPortCurrentLinkTypeThe type of signalling used on this interface.ro Enumeration .1.3.6.1.4.1.81.33.7.1.1.8 |
atmSwchVPortCurrentTermTypeThe type of link termination currently in use at
this interface.ro Enumeration .1.3.6.1.4.1.81.33.7.1.1.9 |
atmSwchVPortConfigILMIStateThe configured state of the ILMI protocol stack.rw Enumeration .1.3.6.1.4.1.81.33.7.1.1.10 |
atmSwchVPortConfigAddrRegEnIndicates whether address registration is to be
performed on this interface.rw Enumeration .1.3.6.1.4.1.81.33.7.1.1.11 |
atmSwchVPortConfigLinkTypeThe configured type of signalling used on this
interface. Attempts to set the unknown state will
be rejected.rw Enumeration .1.3.6.1.4.1.81.33.7.1.1.12 |
atmSwchVPortConfigTermTypeThe type of link termination configured for use at
this interface.rw Enumeration .1.3.6.1.4.1.81.33.7.1.1.13 |
atmSwchVPortNeighbourSysNameThe sysName for the device at the remote end of
the link to this interface.ro DisplayString .1.3.6.1.4.1.81.33.7.1.1.14 |
atmSwchVPortNeighbourUNIVersionThe highest version of stack type usable by the interface
at the remote end of the link to this interface.ro Enumeration .1.3.6.1.4.1.81.33.7.1.1.15 |
atmSwchVPortNeighbourATMAddressThe ifPhysAddress used by the interface at the
remote end of the link to this interface.ro AtmAddress .1.3.6.1.4.1.81.33.7.1.1.16 |
atmSwchVPortNeighbourIfNameThe ifName used by the interface at the
remote end of the link to this interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.81.33.7.1.1.17 |
atmSwchVPortMibProbeWhether the ability to find out proprietary
features via the probe MIB (ILMI extensions)
is switched on or off.rw Enumeration .1.3.6.1.4.1.81.33.7.1.1.18 |
atmSwchVPortConfMinSvccVciThe minimum VCI that the signalling stack on
the vport is configured to support for allocation
to switched virtual channel connections.rw INTEGER .1.3.6.1.4.1.81.33.7.1.1.19 |
atmSwchVPortConfMaxSvccVciThe maximum VCI that the signalling stack on
the vport is configured to support for
allocation to switched virtual channel connections.rw INTEGER .1.3.6.1.4.1.81.33.7.1.1.20 |
atmSwchVPortConfMinVpiThe minimum VPI available for use by any connection
on this virtual port.
Curently, this is always 0 for the root vport, while
non-root vports take a value greater than the MaxVpi
of the root vport.
For Non-root vports MinVpi==MaxVpi.rw INTEGER .1.3.6.1.4.1.81.33.7.1.1.21 |
atmSwchVPortConfMaxVpiThe maximum VPI available for use by any connection
on this virtual port. Curently possible values are:
0, 1, 3 and 7,
For Non-root vports MinVpi==MaxVpi.rw INTEGER .1.3.6.1.4.1.81.33.7.1.1.22 |
atmSwchVPortNeighbourIpAddressThe IP address used by the interface at the
remote end of the link to this interface.ro IpAddress .1.3.6.1.4.1.81.33.7.1.1.23 |
atmSwchVPortPcrThe Peak Cell Rate (in 1000bits per second)
for that Vport. Available only for non-root Vports.
The root-vport will always return the value of 0rw INTEGER .1.3.6.1.4.1.81.33.7.1.1.24 |
atmSwchVPortRowStatusThis object is used to create, delete or modify a row in this table.
To create a new Vport, this object is initially set to 'createAndWait'
or 'createAndGo'. This object should not be set to 'active' unless
the following columnar objects have been set to their desired value
in this row:
atmSwchVPortIndex with the value of vport identifier + 1.
The root Vport always exists and cannot be deleted
atmSwchVPortConfMinVpi = atmSwchVPortConfMaxVpi with
the VPI value associated with the Vport.
This VPI should be not be used by other Vports.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.81.33.7.1.1.25 |
atmSwchSlotRoute OBJECT IDENTIFIER .1.3.6.1.4.1.81.33.8 |
atmSwchSlotRouteTablea list of ATM routing table addresses SEQUENCE OF AtmSwchSlotRouteEntry .1.3.6.1.4.1.81.33.8.1 |
atmSwchSlotRouteEntryATM address routing entry: ATM Address to Port AtmSwchSlotRouteEntry .1.3.6.1.4.1.81.33.8.1.1 |
atmSwchSlotRouteIdUnique identifier for this row.
This value will always match the OID leaf value.ro INTEGER .1.3.6.1.4.1.81.33.8.1.1.1 |
atmSwchSlotRouteRowStatusThis objest is used to create or delete entries in the
atmSwchSlotRouteTable. See Textual Convention in RFC 1903.
Next available index is: atmSwchSlotRouteNextId
active (1),
notInService (2),
notReady (3),
createAndGo (4) - not supported tbd,
createAndWait (5)
destroy (6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.81.33.8.1.1.2 |
atmSwchSlotRouteAddressPrefixThe ATM address to be used for routing.rw AtmAddress .1.3.6.1.4.1.81.33.8.1.1.3 |
atmSwchSlotRoutePrefixLengthThe number of bits used in the Address Prefixrw INTEGER .1.3.6.1.4.1.81.33.8.1.1.4 |
atmSwchSlotRoutePriorityThe priority of this route entry (not used at this time)rw INTEGER .1.3.6.1.4.1.81.33.8.1.1.5 |
atmSwchSlotRouteSlotIdentifier for the slot used by the routerw INTEGER .1.3.6.1.4.1.81.33.8.1.1.6 |
atmSwchSlotRoutePortIdentifier for the port on the above slot to be
used by the routerw INTEGER .1.3.6.1.4.1.81.33.8.1.1.7 |
atmSwchSlotRouteVportIdentifier for the virtual port on the above port
to be used by the route.rw INTEGER .1.3.6.1.4.1.81.33.8.1.1.8 |
atmSwchSlotRouteOriginIndicates origin of routero Enumeration .1.3.6.1.4.1.81.33.8.1.1.9 |
atmSwchSlotRouteOperStatusIndication of route's operational statusro Enumeration .1.3.6.1.4.1.81.33.8.1.1.10 |
atmSwchSlotAddrVcl OBJECT IDENTIFIER .1.3.6.1.4.1.81.33.9 |
atmSwchSlotAddrVclTableThis table provides an alternative way to
retrieve the atmVclTable. This table can be used
to retrieve the indexing to the atmVclTable by an
ATM address.
Based on the standard atmAddrVclTable with a SlotIndex. SEQUENCE OF AtmSwchSlotAddrVclEntry .1.3.6.1.4.1.81.33.9.1 |
atmSwchSlotAddrVclEntryEach entry in this table represents an entry in
the atmVclTable of the ATM-MIB by its ATM
address. The ATM address is either the calling or
called party ATM address of the call. Entries in
this table are read only. They show up when
entries are created in the atmVclAddrTable. AtmSwchSlotAddrVclEntry .1.3.6.1.4.1.81.33.9.1.1 |
atmSwchSlotAddrVclAddrAn ATM address on one end of the VCL.ro AtmAddress .1.3.6.1.4.1.81.33.9.1.1.1 |
atmSwchSlotAddrVclAtmIfIndexThe interface index of the ATM interface to which
this VCL pertains. This object combined with the
atmAddrVclVpi and atmAddrVclVci objects serves as
an index to the atmVclTable.ro INTEGER .1.3.6.1.4.1.81.33.9.1.1.2 |
atmSwchSlotAddrVclVpiThe VPI value of the VCL. This object combined
with the atmAddrVclAtmIfIndex and atmAddrVclVci
objects serves as an index to the atmVclTable.ro INTEGER .1.3.6.1.4.1.81.33.9.1.1.3 |
atmSwchSlotAddrVclVciThe VCI value of the VCL. This object combined
with the atmAddrVclAtmIfIndex and atmAddrVclVpi
objects serves as an index to the atmVclTable.ro INTEGER .1.3.6.1.4.1.81.33.9.1.1.4 |
atmSwchSlotAddrVclAddrTypeThe type of ATM Address represented by the object
atmVclAddrAddr. Choices are either calling party
address or called party address.ro Enumeration .1.3.6.1.4.1.81.33.9.1.1.5 |