ATMPrivate-Mib
AI MIB Summary
Standard SNMP MIB module defining data structures for ATMPrivate-Mib.
25
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
25 total| Object Name |
|---|
IMPORTSThe chromatis private ATM Interface Configuration Table SEQUENCE OF ChrComAtmIfEntry .1.3.6.1.4.1.3695.1.2.2.1 |
chrComAtmVplTableThe Chromatis Private VPL Termination Point Configuration
table extensions. This table augments the VPL
configuration table in RFC 2515. SEQUENCE OF ChrComAtmVplEntry .1.3.6.1.4.1.3695.1.9.1.1 |
chrComAtmVplEntryAdditional columns for the VPL configuration table entry. ChrComAtmVplEntry .1.3.6.1.4.1.3695.1.9.1.1.1 |
chrComAtmVplNimPtSpecifies whether the VPL termination point is monitored non-intrusively.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3695.1.9.1.1.1.1 |
chrComAtmVplPMAdminStatusIndication whether collection of Performance Monitoring (PM) data is enabled
at this the VCL TP. The total number of VPLs and VCLs for which PM is
collected is limited, therefore the SET(up) SNMP request might be rejected
when the upper limit exceeds. AtmIfMaxPM and AtmIfCurrentPM fields of the ATM
interface table reflect that limitation.rw AdminStatus .1.3.6.1.4.1.3695.1.9.1.1.1.2 |
chrComAtmVplVpiApsChannelIdSpecifies the Vcl Vpi which is the APS channel of the protection group.
NULL value signifies that the VPL is stand-alone and does not belong
to any group.rw INTEGER .1.3.6.1.4.1.3695.1.9.1.1.1.3 |
chrComAtmVplVciApsChannelIdSpecifies the Vcl Vci which is the APS channel of the protection group.
NULL value signifies that the VPL is stand-alone and does not belong
to any group.rw INTEGER .1.3.6.1.4.1.3695.1.9.1.1.1.4 |
chrComAtmVplIfIndexVpPeerIdSpecifies the Vpl IfIndex which is relevant only on sink node,
i.e. on the boundary of the protection domain.
In specified the ID of a Virtual VPL that represents the whole protection
peer. This V.VPL is the one that is cross connected.
NullPeerID signifies unprotected VPL.
Default NullVPPeerID (that specifies unprotected sink or an intermediate
node)NullPeerID is MAXINT (IfIndex, AtmVplVpi), i.e. all bits are 1.rw Integer32 .1.3.6.1.4.1.3695.1.9.1.1.1.5 |
chrComAtmVpiPolicingModeThe Policing mode to be applied on the ingress VCL.
The policing is applied according to the parameters defined in the
RX traffic descriptor indexed by AtmVcSlReceiveTrafficDescrIndexrw Integer32 .1.3.6.1.4.1.3695.1.9.1.1.1.6 |
chrComAtmVclTableThe Chromatis Private VCL Termination Point Configuration
table extensions. This table augments the VCL
configuration table in RFC 2515. SEQUENCE OF ChrComAtmVclEntry .1.3.6.1.4.1.3695.1.9.2.1 |
chrComAtmVclEntryAdditional columns for the VCL configuration table entry. ChrComAtmVclEntry .1.3.6.1.4.1.3695.1.9.2.1.1 |
chrComAtmVclNimPtSpecifies whether the VPL termination point is monitored non-intrusively.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3695.1.9.2.1.1.1 |
chrComAtmVclPMAdminStatusIndication whether collection of Performance Monitoring (PM) data is enabled
at this the VCL TP. The total number of VPLs and VCLs for which PM is
collected is limited, therefore the SET(up) SNMP request might be rejected
when the upper limit exceeds. AtmIfMaxPM and AtmIfCurrentPM fields of the ATM
interface table reflect that limitation.rw AdminStatus .1.3.6.1.4.1.3695.1.9.2.1.1.2 |
chrComAtmVclVpiApsChannelIdSpecifies the Vcl Vpi which is the APS channel of the protection group.
NULL value signifies that the VPL is stand-alone and does not belong
to any group.rw INTEGER .1.3.6.1.4.1.3695.1.9.2.1.1.3 |
chrComAtmVclVciApsChannelIdSpecifies the Vcl Vci which is the APS channel of the protection group.
NULL value signifies that the VPL is stand-alone and does not belong
to any group.rw INTEGER .1.3.6.1.4.1.3695.1.9.2.1.1.4 |
chrComAtmVclIfIndexVcPeerIdSpecifies the Vcl IfIndex which is the Virtual VCL that represents the whole
protectio peer.
This V.VCL is the one that is cross-connected.
NULL value signifies that the VCL is not protected.
Default NullVPPeerID (that specifies unprotected sink or an intermediate
node)NullPeerID is MAXINT (IfIndex, AtmVplVpi), i.e. all bits are 1rw Integer32 .1.3.6.1.4.1.3695.1.9.2.1.1.5 |
chrComAtmVciPolicingModeThe Policing mode to be applied on the ingress VCL.
The policing is applied according to the parameters defined in the
RX traffic descriptor indexed by AtmVcSlReceiveTrafficDescrIndexrw Integer32 .1.3.6.1.4.1.3695.1.9.2.1.1.6 |
chrComIfAtmEntryAdditional columns for the ATM Interface table entry. ChrComAtmIfEntry .chrComIfAtmTable.1 |
chrComIfAtmMaxPMdescribes the network operator that selects VPLs and VCLs for which he wants PM
data collection, by setting PM Admin Status field of the VPL/VCL to UP.
This collection request might be rejected if the AtmIfCurrentPM exceeds AtmIfMaxPM.ro Integer32 .chrComIfAtmTable.1.1 |
chrComIfAtmCurrentPMdescribes the network operator that selects VPLs and VCLs for which he wants PM
data collection, by setting PM Admin Status field of the VPL/VCL to UP.
This collection request might be rejected if the AtmIfCurrentPM exceeds AtmIfMaxPM.ro Integer32 .chrComIfAtmTable.1.2 |
chrComIfAtmIfTypeSpecifies the type of ATM cell layer interface defined on the physical path
termination point modeled by this entry in the interface table.
For UNI and BICI interfaces segment end point is automatically configured all VPLs
and VCLs that reside on the interface.
Default values For tribs is UNI and For OCM is NNI.rw AtmIfType .chrComIfAtmTable.1.3 |
atmInterfaceMaxVpiForVccsThe maximum VPI that a VCC (PVCC or SVCC) within the interface can get.
Greater values of VPI can be used only for VPCs.ro Integer32 .chrComIfAtmTable.1.4 |
atmTCloopbackLoopback on the Utopia Interface.ro Integer32 .chrComIfAtmTable.1.5 |
chrComIfAtmAlarmVectordescribes the alarms related to the ATM Interface - represented by a Bit field.ro Integer32 .chrComIfAtmTable.1.6 |
chrComIfAtmAlarmSeverityIndexAn Index into into the alarm severity profile table, specifying the
severity assignment for Atm Interface reported alarms.rw Integer32 .chrComIfAtmTable.1.7 |