ChrComIfOpticsOMS-SNK-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ChrComIfOpticsOMS-SNK-MIB.
32
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
32 total| Object Name |
|---|
chrComIfOpticsOMS-SNKEntry ChrComIfOpticsOMS-SNKEntry .1 |
chrComIfOpticsOmsSnkNumOfPrecedingOPAsrw Integer32 (-1..32) .1.1 |
chrComIfOpticsOmsSnkDWDMInputPowerThe aggregated optical power of all the DWDM input channels (without the 1310nm channel).ro Integer32 (-501..300) .1.2 |
chrComIfOpticsOmsSnkOPALOOCThrThreshold for the OMS-SNK DWDM Input Power , indicating Loss Of Optical DWDM Channels at the input to the Pre-OPA/in-line-OPA.ro Integer32 (-501..300) .1.3 |
IMPORTSThe OMS is managed only for the Ring side of the Metropolis Network (not for the Trib side). SEQUENCE OF ChrComIfOpticsOMS-SNKEntry .1.3.6.1.4.1.3695.1.2.3.3 |
chrComIfOpticsOmsSnkParamForOPALOOCThrInput parameter for calculating OMS-SNK LOOC Threshold (for pre-OPA/in-line-OPA only).rw Integer32 (-501..300) .1.4 |
chrComIfOpticsOmsSnkLOOPThrThreshold for the OMS-SNK DWDM Input Power indicating Loss Of Optical power in the DWDM band at the input to ADOM/OMDM.rw Integer32 (-501..300) .1.5 |
chrComIfOpticsOmsSnkReceived1310PowerThe optical power monitored on 1310 Receive point.ro Integer32 (-501..300) .1.6 |
chrComIfOpticsOmsSnkReceivedLambdaPowerThe optical power monitored on ADOM Lambda Receive point.ro Integer32 (-501..300) .1.7 |
chrComIfOpticsOmsSnkBackplaneAttenuatorLambdaAttenuation in dB.
Zero when no backplane Attenuator exists.rw OCTET STRING .1.8 |
chrComIfOpticsOmsSnkBackplaneAttenuator1310Attenuation in dB.
Zero when no backplane Attenuator exists.rw Integer32 (-1..350) .1.9 |
chrComIfOpticsOmsSnkParamForRxLambdaLOOCThrInput parameter for calculating OMS-SNK Received lambda LOOC thresholdrw Integer32 (-501..300) .1.10 |
chrComIfOpticsOmsSnkRxLambdaLOOCThrLoop Threshold of OMS-SNK Received lambda power .ro Integer32 (-501..300) .1.11 |
chrComIfOpticsOmsSnkRx1310LOOCThrLoop threshold of OMS-SNK Received 1310 Power .ro Integer32 (-501..300) .1.12 |
chrComIfOpticsOmsSnkOchRRx1310LOOCThrA duplication of the OCH-R Received 1310 Looc threshold .rw Integer32 (-501..300) .1.13 |
chrComIfOpticsOmsSnkPreOPADWDMOutPowerTotal Optical Power Monitored at the output of a Pre-OPA.ro Integer32 (-501..300) .1.14 |
chrComIfOpticsOmsSnkPreOPAOutLOOPThrThis is a threshold on the output power of the pre-OPA.rw Integer32 (-501..300) .1.15 |
chrComIfOpticsOmsSnkPreOPASafetyThrThis is a threshold on the output power of the pre-OPA.rw Integer32 (-501..300) .1.16 |
chrComIfOpticsOmsSnkOPAModeOfOperation(Automatic Gain Control -AGC Default)
Automatic Pump Power Control PPCrw Agcppc .1.17 |
chrComIfOpticsOmsSnkOPAExpectedGainInteger32, Units of 0.1 db.
0 35 db (10dB)rw Integer32 (-1..350) .1.18 |
chrComIfOpticsOmsSnkOPAActualGainInteger32, Units of 0.1 db.
0 35 dbro Integer32 (-1..350) .1.19 |
chrComIfOpticsOmsSnkOPAExpectedPumpPowerThe Desired EDFA pump power of pre-/in-line-OPA module.rw Integer32 (-1..2000) .1.20 |
chrComIfOpticsOmsSnkOPAActualPumpPowerThe Actual EDFA pump power of pre-/in-line-OPA module.ro Integer32 (-1..2000) .1.21 |
chrComIfOpticsOmsSnkOPAAPSDStateControlling the Automatic Pump Shut Down (APSD) mode.rw APSDSTATE .1.22 |
chrComIfOpticsOmsSnkOPAPumpRestartActionEnables remote operation which is equivalent to the restart push button of the pre-/in-line-OPA.rw TruthValue (SNMPv2-TC) .1.23 |
chrComIfOpticsOmsSnkOPAPumpActivationStatusPre-/in-line-OPA Pump Laser ON/OFF Actual status.ro LaserActivation .1.24 |
chrComIfOpticsOmsSnkOPAExpectedAttenuatorAttenuationThe expected Attenuation of the attenuator at the output of the OPArw Integer32 (-1..4000) .1.25 |
chrComIfOpticsOmsSnkOPAActualAttenuatorAttenuationThe actual Attenuation of the attenuator at the output of the OPAro Integer32 (-1..400) .1.26 |
chrComIfOpticsOmsSnkOPAPumpTemperatureThe temperature of the module.ro Unsigned32 .1.27 |
chrComIfOpticsOmsSnkOPAPumpBiasCurrentro Integer32 (-1..4000) .1.28 |
chrComIfOpticsAlarmVectorro Unsigned32 .1.29 |
chrComIfOpticsAlarmSeverityProfileIndexrw Unsigned32 .1.30 |