ARMILLAIRE2000-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ARMILLAIRE2000-MIB.
834
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
834 total| Object Name |
|---|
armillaire OBJECT IDENTIFIER .1.3.6.1.4.1.4618 |
RFC1155-SMI Unknown .1.3.6.1.4.1.4618 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1 |
armillaire2000 OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2 |
switchInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.1 |
switchGenInfoGrp OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.1.1 |
switchNameThe switch Name. Can be any combination of alphanumeric
characters. Spaces are not allowed and cannot exceed 24 charactersrw NameString .1.3.6.1.4.1.4618.1.2.1.1.1 |
switchDescrDescription of the Switch. Can be any combination of alphanumeric
characters. Spaces are allowed and cannot exceed 255 characters.rw DisplayString .1.3.6.1.4.1.4618.1.2.1.1.2 |
switchLocationLocation of the Switch. Can be any combination of alphanumeric
characters. Spaces are allowed and cannot exceed 255 characters.rw DisplayString .1.3.6.1.4.1.4618.1.2.1.1.3 |
switchContactContact information about the Switch. Can be any combination of alphanumeric
characters. Spaces are allowed and cannot exceed 24 characters.rw DisplayString .1.3.6.1.4.1.4618.1.2.1.1.4 |
switchIPAddrSwitch IP address. In xxx.xxx.xxx.xxx format.ro IpAddress .1.3.6.1.4.1.4618.1.2.1.1.5 |
switchUpTimeThe Time (in Seconds) since last restart of the Switchro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4618.1.2.1.1.6 |
switchVersionThe version of current Switchro DisplayString .1.3.6.1.4.1.4618.1.2.1.1.7 |
switchVerDescrThe description of switch versionro DisplayString .1.3.6.1.4.1.4618.1.2.1.1.8 |
systemDescrThe description of the Systemro DisplayString .1.3.6.1.4.1.4618.1.2.1.1.9 |
switchTypeThe Switch Type : (National/International)ro SwitchType .1.3.6.1.4.1.4618.1.2.1.1.10 |
switchNameStatusCurrent Status (configurational Status) of this Switch Name.
To Configure this Link, the only option is 'CREATEANDWAIT'
To Delete this Link, the only option is 'DESTROY'
For the GET Operation, the possible options are
1) active
2) notinservice
3) norw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.1.1.11 |
switchPcInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.1.2 |
switchPcInfoTableSwitch Point code Information Table.The index of this
table is switchPc (Integer). SEQUENCE OF SwitchPcEntry .1.3.6.1.4.1.4618.1.2.1.2.1 |
switchPcEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. SwitchPcEntry .1.3.6.1.4.1.4618.1.2.1.2.1.1 |
switchPcPoint Code for the switch (the Integer Value).
The Point Code should be converted into its Integer
equivalent. For Example:
0-1-1 is converted as 257 (for ANSI)
0-1-2 is converted as 10 (for ITU)rw INTEGER .1.3.6.1.4.1.4618.1.2.1.2.1.1.1 |
switchPcModePoint Code type (ANSI/ITU)rw Standard .1.3.6.1.4.1.4618.1.2.1.2.1.1.2 |
switchPcStatusCurrent Status (configurational Status) of this Switch Point Code.
To Configure this Link, the only option is 'CREATEANDWAIT'
To Delete this Link, the only option is 'DESTROY'
For the 'GET' Operation, the possible options are
1) active
2) notinservicrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.1.2.1.1.3 |
switchUsrInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.1.3 |
switchUserCfgTableThis Table is to maintain the User information
and providing Validation Checks for Authorised users
for Configuration.The index of this table is switchUserId (Integer).
CURRENTLY NOT APPLICABLE SEQUENCE OF SwitchUserCfgEntry .1.3.6.1.4.1.4618.1.2.1.3.1 |
switchUserCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level.
CURRENTLY NOT APPLICABLE SwitchUserCfgEntry .1.3.6.1.4.1.4618.1.2.1.3.1.1 |
switchUserIdThe Id of the Switch User. The user can only 'SET' User Id.
If user tries to 'GET' the user Id, incorrect value would be displayed.
This Feature is CURRENTLY NOT APPLICABLErw INTEGER .1.3.6.1.4.1.4618.1.2.1.3.1.1.1 |
switchUserNameThe NAME of the Switch User. The user can only 'SET' User NAME.
If user tries to 'GET' the user Id, incorrect value would be displayed.
This Feature is CURRENTLY NOT APPLICABLErw NameString .1.3.6.1.4.1.4618.1.2.1.3.1.1.2 |
switchUserPasswordThe PASSWORD of the Switch User. This is in an encrypted format.
This is not visible to user.The user can only set password .
This Feature is CURRENTLY NOT APPLICABLErw NameString .1.3.6.1.4.1.4618.1.2.1.3.1.1.3 |
switchUserPriorityThe PRIORITY of the Switch User. User Priority by default is ADMINISTRATOR.
This Feature is CURRENTLY NOT APPLICABLErw UserLoginPriority .1.3.6.1.4.1.4618.1.2.1.3.1.1.4 |
switchUserStatusChecks whether user is a valid user.
Only the user with administrative privilege can login.
This Feature is CURRENTLY NOT APPLICABLErw UserLoginStatus .1.3.6.1.4.1.4618.1.2.1.3.1.1.5 |
switchVersionGrp OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.1.4 |
switchVerLMSwitch's Process LM Version numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.1.4.1 |
switchVerMTP2Switch's Process MPT2 Version numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.1.4.2 |
switchVerICCSwitch's Process ICC Version numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.1.4.3 |
switchVerSIGSwitch's Process SIG Version numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.1.4.4 |
switchVerISDNSwitch's Process ISDN Version numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.1.4.5 |
switchVerSPHRSwitch's Process SPHR Version numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.1.4.6 |
switchConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2 |
ss7 OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2.1 |
ss7Sig OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2.1.1 |
ss7LinkCfgTableSS7 Link Table. Information about the SS7 Link(s) in MSSC are
provided in this table. The index of this table is ss7LinkName (String) SEQUENCE OF Ss7LinkCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.1.1 |
ss7LinkCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. Ss7LinkCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.1.1.1 |
ss7LinkNameLink name. Can be any combination of alphanumeric characters.
Spaces are not allowed and cannot exceed 15 characters.rw NameString .1.3.6.1.4.1.4618.1.2.2.1.1.1.1.1 |
ss7LinkIdUser assigned Link id. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.1.1.1.2 |
ss7LinkTrunkIdUser assigned Trunk id.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.1.1.1.3 |
ss7LinkChannelUser assigned channel.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.1.1.1.4 |
ss7LinkSlcLink Selection Code. Can be any integer 0-15.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.1.1.1.5 |
ss7LinkSpeedSS7 Link Speed: Possible Values are:
56k or 64k.
Default Value is 64Kro LinkType .1.3.6.1.4.1.4618.1.2.2.1.1.1.1.6 |
ss7LinkModeLink Mode(ANSI/ITU)rw Standard .1.3.6.1.4.1.4618.1.2.2.1.1.1.1.7 |
ss7LinkRowStatusCurrent Status (configurational Status) of this Link.
To Configure this Link, the only option is 'CREATEANDWAIT'
To Delete this Link, the only option is 'DESTROY'
For the 'GET' Operation, the possible options are
1) active
2) notinservice
3) notreadrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.2.1.1.1.1.8 |
ss7LinkOpStatusCurrent Status (Operational Status) of this SS7 Link.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) down
3) inhibitro LinkOpStatus .1.3.6.1.4.1.4618.1.2.2.1.1.1.1.9 |
ss7AtmLinkCfgTableSS7 Atm Link Table. Information about the Atm Link(s) in MSSC are
provided in this table. This table has two indices. The indices are
ss7AtmVpi and ss7AtmVci (both Integer). SEQUENCE OF Ss7AtmLinkCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.1.2 |
ss7AtmLinkCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. Ss7AtmLinkCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.1.2.1 |
ss7AtmVpiAtmlink Virtual Path Identifier.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.1.2.1.1 |
ss7AtmVciAtmlink Virtual Channel Identifier.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.1.2.1.2 |
ss7AtmLnkIdAtmlink Id.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.1.2.1.3 |
ss7AtmXconnectIdXconnect Id.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.1.2.1.4 |
ss7AtmSlotIdSlot Id.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.1.2.1.5 |
ss7AtmPortIdPort Id.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.1.2.1.6 |
ss7AtmChnlIdChannel Id.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.1.2.1.7 |
ss7AtmTrnkIdAtm Trunk Id.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.1.2.1.8 |
ss7AtmPhyTypeSS7 ATM Physical interface type. The value of this object could be 1) T1 (interface - t1) 2) E1 (interface - e1).rw AtmIfType .1.3.6.1.4.1.4618.1.2.2.1.1.2.1.9 |
ss7AtmLinkRowStatusCurrent ATM Status (configurational Status) of this Link.
To Configure this Link, the only option is 'CREATEANDWAIT'
To Delete this Link, the only option is 'DESTROY'
For the 'GET' Operation, the possible options are
1) active
2) notinservice
3) notrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.2.1.1.2.1.10 |
ss7AtmLinkOpStatusCurrent Status (Operational Status) of this SS7 Atm Link.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) down
3) inhibitro LinkOpStatus .1.3.6.1.4.1.4618.1.2.2.1.1.2.1.11 |
ss7LinksetCfgTableSS7 Linkset Table. Information about the Linkset(s) in MSSC are
provided in this table. This table has the index ss7LinksetLinkId (Integer). SEQUENCE OF Ss7LinksetCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.1.3 |
ss7LinksetCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. Ss7LinksetCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.1.3.1 |
ss7LinksetLinkIdLink id. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.1.3.1.1 |
ss7LinksetIdLinkset id. Can be any integer 1-128.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.1.3.1.2 |
ss7LinksetNameLinkset name. Can be any combination of alphanumeric characters.
Spaces are not allowed and cannot exceed 15 characters.rw NameString .1.3.6.1.4.1.4618.1.2.2.1.1.3.1.3 |
ss7LinksetAdjDpcAdjacent Point Code for this Linkset (the Integer value).
The Point Code should be converted into its Integer
equivalent. For Example:
0-1-1 is converted as 257 (for ANSI)
0-1-2 is converted as 10 (for ITU)rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.1.3.1.4 |
ss7LinksetModeLinkset Type(ANSI/ITU)rw Standard .1.3.6.1.4.1.4618.1.2.2.1.1.3.1.5 |
ss7LinksetRowStatusCurrent Status (configurational Status) of this Link.
To Configure this Link, the only option is 'CREATEANDWAIT'
To Delete this Link, the only option is 'DESTROY'
For the 'GET' Operation, the possible options are
1) active
2) notinservice
3) notreadrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.2.1.1.3.1.6 |
ss7LinksetOpStatusCurrent Status (Operational Status) of this Link Set.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) deactivero LinkSetOpStatus .1.3.6.1.4.1.4618.1.2.2.1.1.3.1.7 |
ss7LinksetMgmtTableSS7 Linkset Management Table. The Management Commands for Linkset
in MSSC are provided in this table. This table has the index linksetId (Integer). SEQUENCE OF Ss7LinksetMgmtEntry .1.3.6.1.4.1.4618.1.2.2.1.1.4 |
ss7LinksetMgmtEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. Ss7LinksetMgmtEntry .1.3.6.1.4.1.4618.1.2.2.1.1.4.1 |
linksetIdSS7 Linkset Idro INTEGER .1.3.6.1.4.1.4618.1.2.2.1.1.4.1.1 |
linksetLevelThis option deactivates the linkset at level 1 or level 2.
Level 2 is for layer 2 only.
The option available are:
1) Level 1 (level-1) [Default]
2) Level 2 (level-2)rw Level .1.3.6.1.4.1.4618.1.2.2.1.1.4.1.2 |
linksetMgmntCmdManagement Command for Activing/DeActiving call on this linkset.
The possible options are :
1) Active
2) Deactive
3) Noaction [default]rw LinkSetControlStatus .1.3.6.1.4.1.4618.1.2.2.1.1.4.1.3 |
ss7LinkMgmntTableSS7 Link Management Table. The Management Commands for Link(s)
in MSSC are provided in this table. This table has the index linkName (String). SEQUENCE OF Ss7LinkMgmntEntry .1.3.6.1.4.1.4618.1.2.2.1.1.5 |
ss7LinkMgmntEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. Ss7LinkMgmntEntry .1.3.6.1.4.1.4618.1.2.2.1.1.5.1 |
linkNameSS7 Link Namero NameString .1.3.6.1.4.1.4618.1.2.2.1.1.5.1.1 |
linkMgmntCmdManagement Command for Inhibiting/UnInhibiting link.
The possible options are :
1) Inhibit
2) UnInhibit
3) Noaction [default]rw LinkControlStatus .1.3.6.1.4.1.4618.1.2.2.1.1.5.1.2 |
ss7Br OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2.1.2 |
ss7TrunkCfgTableISDN Trunk Table. The Information about ISDN Trunk(s)
in MSSC are provided in this table.
This table has the index ss7TrunkId (Integer). SEQUENCE OF Ss7TrunkCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.2.1 |
ss7TrunkCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. Ss7TrunkCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.2.1.1 |
ss7TrunkIdId for the trunk. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.1 |
ss7TrunkNameName for the trunk. Can be any combination of alphanumeric characters.
Spaces are not allowed and cannot exceed 15 characters.rw NameString .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.2 |
ss7TrunkGrpIdId of the trunk group to which the trunk belongs. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.3 |
ss7TrunkXconnectIdXconnect idrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.4 |
ss7TrunkSlotIdSlot idrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.5 |
ss7TrunkPortIdPort idrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.6 |
ss7TrunkOpcOriginating point code (the Integer value).
The Point Code should be converted into its Integer
equivalent. For Example:
0-1-1 is converted as 257 (for ANSI)
0-1-2 is converted as 10 (for ITU)rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.7 |
ss7TrunkDpcDestination point code ( the Integer Value).
The Point Code should be converted into its Integer
equivalent. For Example:
0-1-1 is converted as 257 (for ANSI)
0-1-2 is converted as 10 (for ITU)rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.8 |
ss7TrunkPhyTypePhysical Interface Type
possible options are
1) T1 (interface-t1)
2) T3 (interface-t3)
3) Unchannelized T3 (interface-ut3)
4) OC3 (interface-oc3)
5) Unchannelized T3 with compression (interface-ut3cp)
6) OC3 with compression (interface-oc3cp)
7) Erw IfType .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.9 |
ss7TrunkModeTrunk mode - ANSI/ITUrw Standard .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.10 |
ss7TrunkE1MultiFrameE1 multiFrame Type possible options are 1) CAS(1) 2) CCS(2)rw E1MultiFrame .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.11 |
ss7TrunkE1CRC4E1 Cyclic Redundancy Code, possible options are 1) enabled(1) 2) disable(2)rw E1CRC4 .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.12 |
ss7TrunkE1TransClkE1 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)rw TransClkSrc .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.13 |
ss7TrunkDS1LineTypeDS1 Line Type possible options are 1) esF(1) 2) d4(2)rw DS1LineType .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.14 |
ss7TrunkDS1LineCodingDS1 Line Coding, possible options are 1) b8zs(1) 2) ami(2)rw DS1LineCoding .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.15 |
ss7TrunkDS1TransClkSrcDS1 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)rw TransClkSrc .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.16 |
ss7TrunkDS1LBODS1 Line Build Out, possible options are 1) upTo133Feet(1) 2) upTo266Feet(2) 3) upTo399Feet(3) 4) upTo533Feet(4) 5) upTo655Feet(5) 6) negative7_5Db(6) 7) negative15Db(7) 8) negative22_5Db(8)rw DS1LBO .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.17 |
ss7TrunkDS3LineTypeDS3 Line Type possible options are 1) cbitParity(1) 2) clearChannel(2)rw DS3LineType .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.18 |
ss7TrunkDS3TransClkSrcDS3 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)rw TransClkSrc .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.19 |
ss7TrunkDS3LBODS3 Line Build Out possible options are 1) short(1) 2) long(2)rw DS3LBO .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.20 |
ss7TrunkDS3DS1LineTypeDS3DS1 Line Type possible options are 1) esF(1) 2) d4(2)rw DS1LineType .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.21 |
ss7TrunkDS3DS1TransClkSrcDS3DS1ansmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)rw TransClkSrc .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.22 |
ss7TrunkOC3TransClkSrcOC3 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)rw TransClkSrc .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.23 |
ss7TrunkUNCHE3TransClkSrcUNCHANNELIZED E3 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)rw TransClkSrc .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.24 |
ss7TrunkDS3ATMLineTypeDS3-ATM Line Type possible options are 1) cbitParity(1) 2) clearChannel(2)rw DS3LineType .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.25 |
ss7TrunkDS3ATMCellMapDS3-ATM Cell Mapping, possible options are 1) plcp(1) 2) directMapping(2)rw DS3ATMCellMap .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.26 |
ss7TrunkDS3ATMTransClkSrcDS3-ATM transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)rw TransClkSrc .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.27 |
ss7TrunkDS3ATMLBODS3-ATM Line Build Out possible options are 1) short(1) 2) long(2)rw DS3LBO .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.28 |
ss7TrunkRowStatusCurrent Status (configurational Status) of this SS7 Trunk.
To Configure this Link, the only option is 'CREATEANDWAIT'
To Delete this Link, the only option is 'DESTROY'
For the 'GET' Operation, the possible options are
1) active
2) notinservice
3) norw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.29 |
ss7TrunkOpStatusCurrent Status (Operational Status) of this SS7 Trunk.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) downro OpStatus .1.3.6.1.4.1.4618.1.2.2.1.2.1.1.30 |
ss7CktCfgTableSS7 Circuit Table. The Information about SS7 Circuit(s)
in MSSC are provided in this table.
This table has two indices: ss7CktTrunkId and ss7CktChnlId (both Integer). SEQUENCE OF Ss7CktCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.2.2 |
ss7CktCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. Ss7CktCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.2.2.1 |
ss7CktTrunkIdUser Assigned Trunk id.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.1 |
ss7CktChnlIdUser Assigned Channel idrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.2 |
ss7CktIdCircuit id. The Id assingned to each of the circuits for a particular Trunk.ro INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.3 |
ss7CktDpcDestination Point Code (The Integer Value).
The Point Code should be converted into its Integer
equivalent. For Example:
0-1-1 is converted as 257 (for ANSI)
0-1-2 is converted as 10 (for ITU)rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.4 |
ss7CktCicCircuit identifier code. Can be any integer from
1) 1-4095 for ITU
2) 1-16383 for ANSIrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.5 |
ss7CktDirTraffic direction: Possible options are :
1) IN
2) OUT
3) BOTHrw Direction .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.6 |
ss7CktPriorityTraffic priorityrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.7 |
ss7CktT3T3 timer. Default Value is 0 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.8 |
ss7CktT12T12 timer - blocking sent. Default Value is 40 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.9 |
ss7CktT13T13 timer - initial blocking sent. Default Value is 600 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.10 |
ss7CktT14T14 timer - unblocking sent. Default Value is 40 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.11 |
ss7CktT15T15 timer - initial unblocking sent. Default Value is 600 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.12 |
ss7CktT16T16 timer - reset sent. Default Value is 40 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.13 |
ss7CktT17T17 timer - initial reset sent. Default Value is 600 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.14 |
ss7CktTValTVal timer - initial reset sent. Default Value is 100 milliSecondsrw INTEGER(10000) UNITS "ms" .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.15 |
ss7CktRowStatusCurrent Status (configurational Status) of this SS7 Circuit.
To Configure this circuit, the only option is 'CREATEANDWAIT'.
To Delete this circuit, the only option is 'DESTROY'.
To Modify any of the Circuit Timers, the only option is 'MODIFYTIMER'.
Forw CktRowStatus .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.16 |
ss7CktOpStatusCurrent Status (Operational Status) of this SS7 Circuit.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) down
3) blockro CktOpStatus .1.3.6.1.4.1.4618.1.2.2.1.2.2.1.17 |
ss7CICTimerTableSS7 Circuit CIC Timer Table. The Information about SS7 Circuit(s)
Timers in MSSC are provided in this table.User can Modify any Timer(s)
in this table. This table has two indices: ss7CktTmrDpc and ss7CktTmrCic (both Integer). SEQUENCE OF Ss7CicTmrEntry .1.3.6.1.4.1.4618.1.2.2.1.2.3 |
ss7CicTmrEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. Ss7CicTmrEntry .1.3.6.1.4.1.4618.1.2.2.1.2.3.1 |
ss7CktTmrDpcDestination Point Code (The Integer Value).
The Point Code should be converted into its Integer
equivalent. For Example:
0-1-1 is converted as 257 (for ANSI)
0-1-2 is converted as 10 (for ITU)rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.3.1.1 |
ss7CktTmrCicCircuit identifier code. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.3.1.2 |
ss7CktTmrT3T3 timer. Default Value is 0 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.3.1.3 |
ss7CktTmrT12T12 timer - blocking sent. Default Value is 40 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.3.1.4 |
ss7CktTmrT13T13 timer - initial blocking sent. Default Value is 600 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.3.1.5 |
ss7CktTmrT14T14 timer - unblocking sent. Default Value is 40 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.3.1.6 |
ss7CktTmrT15T15 timer - initial unblocking sent. Default Value is 600 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.3.1.7 |
ss7CktTmrT16T16 timer - reset sent. Default Value is 40 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.3.1.8 |
ss7CktTmrT17T17 timer - initial reset sent. Default Value is 600 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.3.1.9 |
ss7CktTmrTValTVal timer - initial reset sent. Default Value is 100 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.3.1.10 |
ss7CktTmrRowStatusThis is a command to MODIFY a Timer. A 'GET' operation on
this object will display the default value [no action].
The possible option for 'SET' operation is:
1)modifyrw ModifyTmrStatus .1.3.6.1.4.1.4618.1.2.2.1.2.3.1.11 |
ss7BCktCfgTableSS7 B-Circuit Table. The Information about SS7 B-Circuit(s)
in MSSC are provided in this table.This table has two indices:
ss7BCktVpi and ss7BCktVci (both Integer). SEQUENCE OF Ss7BCktCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.2.4 |
ss7BCktCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. Ss7BCktCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.2.4.1 |
ss7BCktVpiBroadband Virtual Path Indentifier. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.1 |
ss7BCktVciBroadband Virtual Channel Identifier. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.2 |
ss7BCktTrunkIdTrunk id.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.3 |
ss7BCktDpcBroadband Circuit Destination Point Code (The Integer Value).
The Point Code should be converted into its Integer
equivalent. For Example:
0-1-1 is converted as 257 (for ANSI)
0-1-2 is converted as 10 (for ITU)rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.4 |
ss7BCktCicCircuit identifier code. Can be any integer from :
1) 1-16383 for ANSI
2) 1-4095 for ITUrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.5 |
ss7BCktDirDenotes Traffic direction. Possible Values are:
1) in
2) out
3) bothrw Direction .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.6 |
ss7BCktPriorityTraffic priorityrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.7 |
ss7BCktT3T3 timer. Default Value is 0 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.8 |
ss7BCktT12T12 timer - blocking sent. Default Value is 40 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.9 |
ss7BCktT13T13 timer - initial blocking sent. Default Value is 600 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.10 |
ss7BCktT14T14 timer - unblocking sent. Default Value is 40 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.11 |
ss7BCktT15T15 timer - initial unblocking sent. Default Value is 600 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.12 |
ss7BCktT16T16 timer - reset sent. Default Value is 40 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.13 |
ss7BCktT17T17 timer - initial reset sent. Default Value is 600 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.14 |
ss7BCktTValTVal timer - initial reset sent. Default Value is 100 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.15 |
ss7BCktRowStatusCurrent Status (configurational Status) of this SS7 B-Circuit.
To Configure this circuit, the only option is 'CREATEANDWAIT'.
To Modify any of the timers the only option is 'MODIFYTIMER' .
To Delete this circuit, the only option is 'DESTROY'.
For therw CktRowStatus .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.16 |
ss7BCktOpStatusCurrent Status (Operational Status) of this SS7 B-Circuit.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) down
3) blockro CktOpStatus .1.3.6.1.4.1.4618.1.2.2.1.2.4.1.17 |
ss7CktMgmntGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2.1.2.5 |
ss7CktMgmntTableSS7 Circuit Management Table. The Management Commands for SS7 Circuits(s)
in MSSC are provided in this table.
This table has two indices: ss7CktMgmntTrnkId and ss7CktMgmntChnlId (both Integer). SEQUENCE OF Ss7CktMgmntEntry .1.3.6.1.4.1.4618.1.2.2.1.2.5.1 |
ss7CktMgmntEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. Ss7CktMgmntEntry .1.3.6.1.4.1.4618.1.2.2.1.2.5.1.1 |
ss7CktMgmntTrnkIdTrunk id.ro INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.5.1.1.1 |
ss7CktMgmntChnlIdChannel idro INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.5.1.1.2 |
ss7CktMgmntRepNumRepeat Number for this operation.
This option will allow consecutive CIC to be resetrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.5.1.1.3 |
ss7CktMgmntCmdManagement Command for Blocking/Unblocking any call setup
on the specified channel. The option of repnum is provided to allow
consecutive CIC to be blocked/unblocked
The possible options are :
1) Block
2) UnBlock
3) Noaction [default]rw BlockOperation .1.3.6.1.4.1.4618.1.2.2.1.2.5.1.1.4 |
ss7CICMgmntTableSS7 Circuit CIC Management Table. The Management Commands for SS7 Circuits(s)
in MSSC are provided in this table.
This table has two indices: ss7CktMgmtDPC and ss7CktMgmtCIC (both Integer). SEQUENCE OF Ss7CICMgmntEntry .1.3.6.1.4.1.4618.1.2.2.1.2.5.2 |
ss7CICMgmntEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. Ss7CICMgmntEntry .1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1 |
ss7CktMgmtDPCDestination Point Code (The Integer Value).
The Point Code should be converted into its Integer
equivalent. For Example:
0-1-1 is converted as 257 (for ANSI)
0-1-2 is converted as 10 (for ITU)ro INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1.1 |
ss7CktMgmtCICCircuit identifier code. Can be any integer from
1) 1-4095 for ITU
2) 1-16383 for ANSIro INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1.2 |
ss7CktRepNumRepeat Number for this operation.
This option will allow consecutive CIC to be resetrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1.3 |
ss7CicRangeRange for this operation.
This option will allow consecutive CIC to be resetrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1.4 |
ss7CICMgmntCmdManagement Command for Blocking/Unblocking any call setup
on the specified channel. The option of repnum is provided to allow
consecutive CIC to be blocked/unblocked
The possible options are :
1) Block
2) UnBlock [default]rw CircuitControlStatus .1.3.6.1.4.1.4618.1.2.2.1.2.5.2.1.5 |
mtp2 OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2.1.3 |
mtp2LinkTmrCfgTableMTP2 Link Timer Table. The Information about MTP2 Link Timers
in MSSC are provided in this table. User can Modify Timer(s)
from this table.
This table has one index: mtp2LinkId (Integer). SEQUENCE OF Mtp2LinkTmrCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.3.1 |
mtp2LinkTmrCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. Mtp2LinkTmrCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.3.1.1 |
mtp2LinkIdLink id. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.3.1.1.1 |
mtp2T1t1 timer - for aligned ready condition
GR-606-CORE, ISSUE 1, June 1994. Default Value is 13000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.3.1.1.2 |
mtp2T2t2 timer - Timer for out-of-alignment
GR-606-CORE, ISSUE 1, June 1994. Default Value is 11500 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.3.1.1.3 |
mtp2T3t3 timer - Timer for aligned condition
GR-606-CORE, ISSUE 1, June 1994. Default Value is 11500 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.3.1.1.4 |
mtp2T4nt4n timer - Normal proving period
GR-606-CORE, ISSUE 1, June 1994. Default Value is 2000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.3.1.1.5 |
mtp2T4et4e timer - Emergency proving period
GR-606-CORE, ISSUE 1, June 1994. Default Value is 500 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.3.1.1.6 |
mtp2T5t5 timer - Busy status transmission interval
GR-606-CORE, ISSUE 1, June 1994. Default Value is 100 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.3.1.1.7 |
mtp2T6t6 timer - Supervision of remote congestion timer
GR-606-CORE, ISSUE 1, June 1994. Default Value is 3000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.3.1.1.8 |
mtp2T7t7 timer - Excessive delay of ack
GR-606-CORE, ISSUE 1, June 1994. Default Value is 500 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.3.1.1.9 |
mtp2RowStatusCurrent Status (configurational Status) of this MTP2 Link Timer.
To Modify any Timer for this link, the only option is 'MODIFYTIMER'.
For the 'GET' Operation, the possible options are
1) active
2) notinservice
3) notready
4) modified
5) up
6) downrw TmrRowStatus .1.3.6.1.4.1.4618.1.2.2.1.3.1.1.10 |
mtp2OpStatusCurrent Status (Operational Status) of this MTP2 Link Timer.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) downro OpStatus .1.3.6.1.4.1.4618.1.2.2.1.3.1.1.11 |
mtp3 OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2.1.4 |
mtp3GenTmrCfgGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2.1.4.1 |
mtp3T15T15 timer - Signal route set congestion test interval
GR-606-CORE, ISSUE 1, June 1994. Default Value is 3000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.1.1 |
mtp3T16T16 timer - Transfer controlled update
GR-606-CORE, ISSUE 1, June 1994. Default Value is 1400 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.1.2 |
mtp3T18T18 timer - Timer for links to become available.
Not Applicable to ANSI. Default Value is 1400 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.1.3 |
mtp3T19T19 timer - Timer to receive all traffic restart.
Not Applicable to ANSI. Default Value is 0rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.1.4 |
mtp3T20T20 timer - BroadCast traffic restart interval.
Not Applicable to ANSI.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.1.5 |
mtp3T21T21 timer - Interval to restart traffic route through adjacent SPrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.1.6 |
mtp3T26T26 timer - Timer at restarting SP waiting to repeat TRW
GR-606-CORE, ISSUE 1, June 1994. Default Value is 13500 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.1.7 |
mtp3T30T30 timer - Route Instance timerro INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.1.8 |
mtp3GenTmrRowStatusThis is a command to MODIFY a Timer. A 'GET' operation on
this object will display the default value [no action].
The possible option for 'SET' operation is:
1)modifyrw ModifyTmrStatus .1.3.6.1.4.1.4618.1.2.2.1.4.1.9 |
mtp3LinkCfgTableMTP3 Link Timer Table. The Information about MTP3 Link Timers
in MSSC are provided in this table. User can Modify Timer(s)
from this table.
This table has one index: mtp3LinkId (Integer). SEQUENCE OF Mtp3LinkCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.4.2 |
mtp3LinkCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. Mtp3LinkCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.4.2.1 |
mtp3LinkIdLink id GR-606-CORE, ISSUE 1, June 1994rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.1 |
mtp3T1T1 timer - Transmission delay following changeover
GR-606-CORE, ISSUE 1, June 1994. Default Value is 500 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.2 |
mtp3T2T2 timer - changeover ack timer
GR-606-CORE, ISSUE 1, June 1994. Default Value is 700 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.3 |
mtp3T3T3 timer - Transmission delay following changeback
GR-606-CORE, ISSUE 1, June 1994. Default Value is 500 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.4 |
mtp3T4T4 timer - Changeback ack timer (first attempt)
GR-606-CORE, ISSUE 1, June 1994. Default is 500 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.5 |
mtp3T5T5 timer - Changeback ack timer (subsequent attempt)
GR-606-CORE, ISSUE 1, June 1994. Default is 500 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.6 |
mtp3T6T6 timer - Controlled rerouting transmission delay
GR-606-CORE, ISSUE 1, June 1994. Default Value is 500 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.7 |
mtp3T7T7 Timer - Link connection ack timerro INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.8 |
mtp3T12T12 timer - Uninhibit acknowledge timer
GR-606-CORE, ISSUE 1, June 1994. Default Value is 1000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.9 |
mtp3T13T13 timer - Forced uninhibit ack timer
GR-606-CORE, ISSUE 1, June 1994. Default Value is 1000 milliSeconds.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.10 |
mtp3T14T14 timer - Inhibit ack timer
GR-606-CORE, ISSUE 1, June 1994. Default Value is 3000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.11 |
mtp3T17T17 timer - Timing to restart of initial alignment
GR-606-CORE, ISSUE 1, June 1994. Default Value is 1000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.12 |
mtp3T22T20 timer - Waiting to repeat local inhibit test.
Default Value is 10000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.13 |
mtp3T23T21 timer - Waiting to repeat remote inhibit test.
Default Value is 10000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.14 |
mtp3T24T24 timer - Stabilizing timer.ro INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.15 |
mtp3T31T31 timer - Timer to detect a link in false link congestion.
GR-606-CORE, ISSUE 1, June 1994. Default Value is 30000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.16 |
mtp3T32T32 timer - SLT timerrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.17 |
mtp3T33T33 timer - Timer to detect a link in false link congestion.
GR-606-CORE, ISSUE 1, June 1994. Default Value is 30000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.18 |
mtp3T34T34 timer - Timer to detect a link in false link congestion.
GR-606-CORE, ISSUE 1, June 1994. Default Value is 30000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.19 |
mtp3T35T35 timer - periodic signalling link test timer
GR-606-CORE, ISSUE 1, June 1994. Default Value is 30000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.20 |
mtp3T36T36 timer - Probation timer for link oscillation.
Not in bellcore. Default Value is 30000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.21 |
mtp3T37T37 timer - Suspension Timer for link oscillation.
Not in bellcore. Default Value is 30000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.22 |
mtp3TFLCTFLC timer - Flow control request timer.
Not in bellcore.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.23 |
mtp3TBNDTBND timer - Bind confirm wait timer.
Not in bellcore.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.24 |
mtp3RowStatusCurrent Status (configurational Status) of this MTP3 Link Timer.
To Modify any Timer for this link, the only option is 'MODIFYTIMER'.
For the 'GET' Operation, the possible options are
1) active
2) notinservice
3) notready
4) modified
5) up
6) downrw TmrRowStatus .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.25 |
mtp3OpStatusCurrent Status (Operational Status) of this MTP3 Link Timer.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) downro OpStatus .1.3.6.1.4.1.4618.1.2.2.1.4.2.1.26 |
isup OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2.1.5 |
isupTimerCfgTableIsup Timer Table. The Information about ISUPTimers
in MSSC are provided in this table. User can Modify Timer(s)
from this table.
This table has one index: isupTmrSS7Type (TimerType). SEQUENCE OF IsupTimerCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.5.1 |
isupTimerCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. IsupTimerCfgEntry .1.3.6.1.4.1.4618.1.2.2.1.5.1.1 |
isupTimerTypeIndex for this IsupTimer Table, is an enumerated data type ansi(1), itu(2)rw TimerType .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.1 |
isupTmrT1T1 timer - release sent,
GR-246-CORE, Issue 2, December 1997.
Default Value is 4000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.2 |
isupTmrT2T2 timer - suspend received,
GR-246-CORE, Issue 2, December 1997.
Default Value is 0 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.3 |
isupTmrT5T5 timer - initial release sent
GR-246-CORE, Issue 2, December 1997.
Default Value is 60000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.4 |
isupTmrT6T6 timer - suspend received
GR-246-CORE, Issue 2, December 1997.
Default Value is 10000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.5 |
isupTmrT7T7 timer - latest address sent
GR-246-CORE, Issue 2, December 1997.
Default Value is 20000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.6 |
isupTmrT8T8 - timer initial address received
GR-246-CORE, Issue 2, December 1997.
Default Value is 10000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.7 |
isupTmrT9T9 timer - latest address sent after ACM
GR-246-CORE, Issue 2, December 1997.
Default Value is 120000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.8 |
isupTmrT18T18 timer - group blocking sent
GR-246-CORE, Issue 2, December 1997.
Default Value is 4000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.9 |
isupTmrT19T19 timer - initial group blocking sent
GR-246-CORE, Issue 2, December 1997.
Default Value is 60000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.10 |
isupTmrT20T20 timer - group unblocking sent
GR-246-CORE, Issue 2, December 1997.
Default Value is 4000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.11 |
isupTmrT21T21 timer - initial group unblocking sent
GR-246-CORE, Issue 2, December 1997.
Default Value is 60000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.12 |
isupTmrT22T22 timer - group reset sent
GR-246-CORE, Issue 2, December 1997.
Default Value is 4000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.13 |
isupTmrT23T23 timer - initial group reset sent
GR-246-CORE, Issue 2, December 1997.
Default Value is 60000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.14 |
isupTmrT27T27 timer - waiting for continuity recheck
GR-246-CORE, Issue 2, December 1997.
Default Value is 200000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.15 |
isupTmrT28T28 timer - circuit group query sent
GR-246-CORE, Issue 2, December 1997.
Default Value is 10000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.16 |
isupTmrT31T31 timer - call reference frozen period
GR-246-CORE, Issue 2, December 1997.
Default Value is 360000 milliSecondsrw INTEGER(360) UNITS "sec" .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.17 |
isupTmrT33T33 timer - INR sent
GR-246-CORE, Issue 2, December 1997.
Default Value is 12000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.18 |
isupTmrT34T34 timer - currently unknown. Default Value is 10000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.19 |
isupTmrT36T36 timer - waiting for continuity after recheck,
in bellcore it is T34 GR-246-CORE, Issue 2, December 1997.
Default Value is 2000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.20 |
isupTmrTCCRtCCR timer - continuity recheck timer
GR-246-CORE, Issue 2, December 1997.
Default Value is 20000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.21 |
isupTmrTEXTEX timer - Exit to be sent, currently not applicablero INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.22 |
isupTmrTCRMTCRM timer - circuit reservation message sent.
GR-246-CORE, Issue 2, December 1997.
Default Value is 3000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.23 |
isupTmrTCRATCRA timer - circuit reservation acknowledgement sent.
GR-246-CORE, Issue 2, December 1997.
Default Value is 20000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.24 |
isupTmrTCCRtTCCRt timer - tCCR timer (o/g side).
Default Value is 0 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.25 |
isupTmrTECttECT timer - Explicit Call Transfer -wait for loop prvnt rsp.
Default Value is 0 milliSecondsro INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.26 |
isupTmrTGTCHGTimer tGTCHG - Awaiting charging extended acknowledgement after
having sent CHGEro INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.27 |
isupTmrTGRESTGRS timer - at receipt of circuit group reset message, treat subsequent
circuit group reset messages new only on this timer expiration.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.28 |
isupTmrTFGRTFGR timer - first group received timer
GR-246-CORE, Issue 2, December 1997ro INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.29 |
isupTmrTRELRSPTime tRELRSP - Awaiting for release response.
Default Value is 0 milliSecondsro INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.30 |
isupTmrTFNLRELRSTime tFNLRELRSP - Awaiting for final release response.
Default Value is 0 milliSecondsro INTEGER .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.31 |
isupTimerRowStatusThis is a command to MODIFY a Timer. A 'GET' operation on
this object will display the default value [no action].
The possible option for 'SET' operation is:
1)modifyrw ModifyTmrStatus .1.3.6.1.4.1.4618.1.2.2.1.5.1.1.32 |
ss7Route OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2.1.6 |
ss7RtDpcTableSS7 Route Dpc Table. The Information about Route(s)
in MSSC are provided in this table.
This table has one index: ss7RtDPC (Integer). SEQUENCE OF Ss7RtDpcEntry .1.3.6.1.4.1.4618.1.2.2.1.6.1 |
ss7RtDpcEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. Ss7RtDpcEntry .1.3.6.1.4.1.4618.1.2.2.1.6.1.1 |
ss7RtDPCThe Route Destination Point Code (The Integer Value).
The Point Code should be converted into its Integer
equivalent. For Example:
0-1-1 is converted as 257 (for ANSI)
0-1-2 is converted as 10 (for ITU)rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.6.1.1.1 |
ss7RtCmbLinksetIdSS7 Linkset Id which is already configured so far.
An incorrect Linkset Id will result a failure at
the time of 'CREATION' of the Route table for the specified DPC.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.1.6.1.1.2 |
ss7RtLoadShareTypeLoad Share type(ANSI/ITU)rw Standard .1.3.6.1.4.1.4618.1.2.2.1.6.1.1.3 |
ss7RtRowStatusCurrent Status (configurational Status) of this SS7 Route.
To Configure this Route, the only option is 'CREATEANDWAIT'.
To Delete this Route, the only option is 'DESTROY'.
For the 'GET' Operation, the possible options are
1) active
2) notinservice
3rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.2.1.6.1.1.4 |
ss7RtOpStatusCurrent Status (Operational Status) of this SS7 Route.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) downro OpStatus .1.3.6.1.4.1.4618.1.2.2.1.6.1.1.5 |
isdn OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2.2 |
isdnTmrCfgTableISDN Timer Table. The Information about ISDN Timers
in MSSC are provided in this table. User can Modify Timer(s)
from this table.
This table has one index: isdnTnkId (Integer). SEQUENCE OF IsdnTmrCfgEntry .1.3.6.1.4.1.4618.1.2.2.2.1 |
isdnTmrCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. IsdnTmrCfgEntry .1.3.6.1.4.1.4618.1.2.2.2.1.1 |
isdnTnkIdTrunk id.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.1 |
isdnTmrT301T301 timer - alert received
Recommandation Q.931, TABLE 9-1/Q931rw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.2 |
isdnTmrT302T302 timer - SETUP ACK sent Receipt of INFO
Recommandation Q.931, TABLE 9-1/Q931rw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.3 |
isdnTmrT303T303 timer - setup sent
Recommandation Q.931, TABLE 9-1/Q931.
Default Value is 4000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.4 |
isdnTmrT304T304 timer - setup ack received info sent alert
Recommandation Q.931, TABLE 9-1/Q931.
Default Value is 20000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.5 |
isdnTmrT305T305 timer - disc w/ prog ind sent or disc sent
Recommandation Q.931, TABLE 9-1/Q931.
Default Value is 30000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.6 |
isdnTmrT306T306 timer - disc without prog ind sent
Recommandation Q.931, TABLE 9-1/Q931.
Default Value is 30000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.7 |
isdnTmrT307T307 timer - iusp ack sent
Recommandation Q.931, TABLE 9-1/Q931.
Default Value is 180000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.8 |
isdnTmrT308T308 timer - release sent
Recommandation Q.931, TABLE 9-1/Q931.
Default Value is 4000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.9 |
isdnTmrT310T310 timer - call proc received
Recommandation Q.931, TABLE 9-1/Q931.
Default Value is 10000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.10 |
isdnTmrT311T310 timer - call proc received, not in the network sidero INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.11 |
isdnTmrT312T312 timer - setup sent on broadcast
Recommandation Q.931, TABLE 9-1/Q931.
Default Value is 6000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.12 |
isdnTmrT313T313 timer - conn sent, not in BellCore network siderw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.13 |
isdnTmrT316T316 timer - restart sent interface
Recommandation Q.931, TABLE 9-1/Q931. Default Value is 120000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.14 |
isdnTmrT318T318 timer - resume sent, not in bellcore network siderw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.15 |
isdnTmrT319T319 timer - suspend sent, not in Bellcore network siderw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.16 |
isdnTmrT322T322 timer - stat enq sent
Recommandation Q.931, TABLE 9-1/Q931.
Default Value is 4000 milliSecondsrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.17 |
isdnTmrT316CT316c Timer -Restart sent to individual channelro INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.18 |
isdnTmrT330T330 Timer - Congestion with Upperrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.19 |
isdnTmrT331T331 Timer - Congestion with lowerrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.20 |
isdnTmrT332T332 Timer - Service request sentrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.21 |
isdnTmrTRSTTRst Timer - Disconnect indication sent while restarting interfacero INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.22 |
isdnTmrTRESTTREST Timer - Disconnect indication sent while NI2 restarting interfacerw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.23 |
isdnTmrTANSTAns Timer - Answer timerro INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.24 |
isdnTmrT396T396 Timer - t303 expiredrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.25 |
isdnTmrT397T397 Timer - Information sent on permanent signalrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.1.1.26 |
isdnTrnkTmrRowStatusCurrent Status (configurational Status) of this Isdn Trunk Timer.
To Modify any Timer for this Trunk, the only option is 'MODIFYTIMER'.
For the 'GET' Operation, the possible options are
1) active
2) notinservice
3) notready
4) modified
5) up
6) dorw TmrRowStatus .1.3.6.1.4.1.4618.1.2.2.2.1.1.27 |
isdnTrnkTmrOpStatusCurrent Status (Operational Status) of this Isdn Timer.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) downro OpStatus .1.3.6.1.4.1.4618.1.2.2.2.1.1.28 |
isdnTrunkCfgTableISDN Trunk Table. Information about the ISDN Trunk(s) in MSSC are
provided in this table. The index of this table is isdnTrunkId (Integer) SEQUENCE OF IsdnTrunkCfgEntry .1.3.6.1.4.1.4618.1.2.2.2.2 |
isdnTrunkCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. IsdnTrunkCfgEntry .1.3.6.1.4.1.4618.1.2.2.2.2.1 |
isdnTrunkIdTrunk id. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.2.1.1 |
isdnTrunkNameTrunk name. Can be any combinaton of alphanumeric characters.
Spaces are not allowed.rw NameString .1.3.6.1.4.1.4618.1.2.2.2.2.1.2 |
isdnTrunkGrpIdTrunk Group id to which the trunk belongs. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.2.1.3 |
isdnDchnlIdD-Channel Idrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.2.1.4 |
isdnTrunkTypeTrunk Type (nfas/fas).rw IsdnType .1.3.6.1.4.1.4618.1.2.2.2.2.1.5 |
isdnXconnectIdXconnect idrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.2.1.6 |
isdnSlotIdSlot idrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.2.1.7 |
isdnPortIdPort idrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.2.1.8 |
isdnDirectionTraffic direction.
possible options are
1) in
2) out
3) bothrw Direction .1.3.6.1.4.1.4618.1.2.2.2.2.1.9 |
isdnPriorityTraffic priorityrw IsdnPriority .1.3.6.1.4.1.4618.1.2.2.2.2.1.10 |
isdnDurthresholdBad Call Duration Thresholdrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.2.1.11 |
isdnCntthresholdBad Call Count Thresholdrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.2.1.12 |
isdnPhyIntfTypeIsdn Physical Interface Type
possible options are
1) T1 (interface-t1)
2) T3 (interface-t3)
3) Unchannelized T3 (interface-ut3)
4) OC3 (interface-oc3)
5) Unchannelized T3 with compression (interface-ut3cp)
6) OC3 with compression (interface-oc3cp)rw IfType .1.3.6.1.4.1.4618.1.2.2.2.2.1.13 |
isdnDchnlTimeSlotD-Channel Time slotrw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.2.1.14 |
isdnE1MultiFrameE1 multiFrame Type possible options are 1) CAS(1) 2) CCS(2)rw E1MultiFrame .1.3.6.1.4.1.4618.1.2.2.2.2.1.15 |
isdnE1CRC4E1 Cyclic Redundancy Code, possible options are 1) enabled(1) 2) disable(2)rw E1CRC4 .1.3.6.1.4.1.4618.1.2.2.2.2.1.16 |
isdnE1TransClkE1 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)rw TransClkSrc .1.3.6.1.4.1.4618.1.2.2.2.2.1.17 |
isdnDS1LineTypeDS1 Line Type possible options are 1) esF(1) 2) d4(2)rw DS1LineType .1.3.6.1.4.1.4618.1.2.2.2.2.1.18 |
isdnDS1LineCodingDS1 Line Coding, possible options are 1) b8zs(1) 2) ami(2)rw DS1LineCoding .1.3.6.1.4.1.4618.1.2.2.2.2.1.19 |
isdnDS1TransClkSrcDS1 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)rw TransClkSrc .1.3.6.1.4.1.4618.1.2.2.2.2.1.20 |
isdnDS1LBODS1 Line Build Out, possible options are 1) upTo133Feet(1) 2) upTo266Feet(2) 3) upTo399Feet(3) 4) upTo533Feet(4) 5) upTo655Feet(5) 6) negative7_5Db(6) 7) negative15Db(7) 8) negative22_5Db(8)rw DS1LBO .1.3.6.1.4.1.4618.1.2.2.2.2.1.21 |
isdnDS3LineTypeDS3 Line Type possible options are 1) cbitParity(1) 2) clearChannel(2)rw DS3LineType .1.3.6.1.4.1.4618.1.2.2.2.2.1.22 |
isdnDS3TransClkSrcDS3 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)rw TransClkSrc .1.3.6.1.4.1.4618.1.2.2.2.2.1.23 |
isdnDS3LBODS3 Line Build Out possible options are 1) short(1) 2) long(2)rw DS3LBO .1.3.6.1.4.1.4618.1.2.2.2.2.1.24 |
isdnDS3DS1LineTypeDS3DS1 Line Type possible options are 1) esF(1) 2) d4(2)rw DS1LineType .1.3.6.1.4.1.4618.1.2.2.2.2.1.25 |
isdnDS3DS1TransClkSrcDS3DS1 Transmit Clock Source, possible options are 1) loopTiming(1) 2) localTiming(2)rw TransClkSrc .1.3.6.1.4.1.4618.1.2.2.2.2.1.26 |
isdnTrunkRowStatusCurrent Status (configurational Status) of this ISDN TRUNK.
To Configure this Link, the only option is 'CREATEANDWAIT'
To Delete this Link, the only option is 'DESTROY'
For the 'GET' Operation, the possible options are
1) active
2) notinservice
3) nrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.2.2.2.1.27 |
isdnTrunkOpStatusCurrent Status (Operational Status) of this ISDN Trunk.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) down
3) disablero IsdnTrnkOpStatus .1.3.6.1.4.1.4618.1.2.2.2.2.1.28 |
isdnChnlStatusTableISDN Channel Status Table. Information about the DS0
Channel(s) Status in MSSC are provided in this table.
The index of this table is isdnStatusTrunkId (Integer) SEQUENCE OF IsdnChnlStatusCfgEntry .1.3.6.1.4.1.4618.1.2.2.2.3 |
isdnChnlStatusCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. IsdnChnlStatusCfgEntry .1.3.6.1.4.1.4618.1.2.2.2.3.1 |
isdnStatusTrunkIdro INTEGER .1.3.6.1.4.1.4618.1.2.2.2.3.1.1 |
isdnStatusChnlIdChannel id.ro INTEGER .1.3.6.1.4.1.4618.1.2.2.2.3.1.2 |
isdnStatusChnlStateIsdn Channel String.ro TrunkState .1.3.6.1.4.1.4618.1.2.2.2.3.1.3 |
isdnStatusChnlAllocMethIsdn Channel AllocMeth.ro INTEGER .1.3.6.1.4.1.4618.1.2.2.2.3.1.4 |
isdnStatusChnlSuConnIdIsdn Channel SuConnId.ro INTEGER .1.3.6.1.4.1.4618.1.2.2.2.3.1.5 |
isdnMgmntGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2.2.4 |
isdnTrnkMgmntTableISDN Trunk Management Table. The Management Commands for ISDN Trunk(s)
in MSSC are provided in this table. This table has the index isdnTrnkMgmntId (Integer). SEQUENCE OF IsdnTrnkMgmntEntry .1.3.6.1.4.1.4618.1.2.2.2.4.1 |
isdnTrnkMgmntEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. IsdnTrnkMgmntEntry .1.3.6.1.4.1.4618.1.2.2.2.4.1.1 |
isdnTrnkMgmntIdTrunk id.ro INTEGER .1.3.6.1.4.1.4618.1.2.2.2.4.1.1.1 |
isdnTrnkMgmntCmdManagement Command for Enabling/Disabling the specified
trunk group. This command will make all the channels in this
trunk available
The possible options are :
1) Enable
2) Disable [default]rw IsdnTrnkMgtOperation .1.3.6.1.4.1.4618.1.2.2.2.4.1.1.2 |
isdnChnlMgmntTableISDN Trunk Channel Management Table. The Management Commands for ISDN Trunk(s)
in MSSC are provided in this table. This table has the index isdnTrunkMgmntId (Integer). SEQUENCE OF IsdnChnlMgmntEntry .1.3.6.1.4.1.4618.1.2.2.2.4.2 |
isdnChnlMgmntEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. IsdnChnlMgmntEntry .1.3.6.1.4.1.4618.1.2.2.2.4.2.1 |
isdnTrunkMgmntIdTrunk id.ro INTEGER .1.3.6.1.4.1.4618.1.2.2.2.4.2.1.1 |
isdnChnlMgmntIdChannel id.ro INTEGER .1.3.6.1.4.1.4618.1.2.2.2.4.2.1.2 |
isdnChnlMgmntCmdManagement Command for Enabling/Disabling the specified
Channel in the specified trunk.
The possible options are :
1) Enable
2) Disable [default]rw IsdnChnlMgtOperation .1.3.6.1.4.1.4618.1.2.2.2.4.2.1.3 |
mfdMgmntTableModem Fault Management Table. The Management Commands for Modem(s) in MSSC
are provided in this table. This table has the index isdnTnkMgmntId (Integer). SEQUENCE OF MfdMgmntEntry .1.3.6.1.4.1.4618.1.2.2.2.4.3 |
mfdMgmntEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. MfdMgmntEntry .1.3.6.1.4.1.4618.1.2.2.2.4.3.1 |
isdnTnkMgmntIdIsdn Trunk id.ro INTEGER .1.3.6.1.4.1.4618.1.2.2.2.4.3.1.1 |
isdnDurThresholdBad Call Duration Threshold.
A value 0 means disable.
If mfd is enabled the normal value for this field would be 3rw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.4.3.1.2 |
isdnCntThresholdBad Call Count Threshold
A value 0 means disable.
If mfd is enabled the normal value for this field would be 3rw INTEGER .1.3.6.1.4.1.4618.1.2.2.2.4.3.1.3 |
mfdMgmntCmdManagement Command for Enabling/Disabling 'MODEM FAULT DETECTION' feature in MSSC.
The possible options are :
1) Enable
2) Disable [default]rw EnableOperation .1.3.6.1.4.1.4618.1.2.2.2.4.3.1.4 |
trnkGrp OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2.3 |
trunkGrpCfgTableSS7/ISDN Trunk Group Table. The Information about Trunk Groups
in MSSC are provided in this table. This table has the index trunkGrpId (Integer). SEQUENCE OF TrunkGrpCfgEntry .1.3.6.1.4.1.4618.1.2.2.3.1 |
trunkGrpCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. TrunkGrpCfgEntry .1.3.6.1.4.1.4618.1.2.2.3.1.1 |
trunkGrpIdDenotes Id for this trunk group. Range for Id is 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.3.1.1.1 |
trunkGrpNameDenotes Name of this trunk group.
The Name is a string of length 8. The first two characters
of Name have to be alphabhets. The next 6 charecters are
numeric. An example a valid Trunk Group Name is ab123456.
NOTE: This format needs to be strictly follrw DisplayString .1.3.6.1.4.1.4618.1.2.2.3.1.1.2 |
trunkGrpCarrierIdDenotes Carrier id for this trunk group.
The Carrier id Field is an integer of length 4.
An example for Carried Id is: 1234
NOTE: The format for sertting the Carrier Id needs
to strictly followed. Failure to follow this format
will result in unsuccesrw INTEGER .1.3.6.1.4.1.4618.1.2.2.3.1.1.3 |
trunkGrpTypeDenotes Trunk group type. Possible values for Trunk group are:
1. ss7
2. isdnrw TrnkGrpType .1.3.6.1.4.1.4618.1.2.2.3.1.1.4 |
trunkGrpRoffNameDenotes Remote Office Name:
NOTE: Value for this object is NOT Valid if TrunkGrpType
is ISDN. Only Valid For SS7 TrunkGroup. If trunkGrpType
is ISDN and the USER sets the value for Remote Office
Name, then this Remote Office Name will be ignored whenrw NameString .1.3.6.1.4.1.4618.1.2.2.3.1.1.5 |
trunkGrpRoffTypeDenotes Remote Office Type:
NOTE: Value for this object is NOT Valid if TrunkGrpType
is ISDN. Remote Office Type is only Valid For SS7
TrunkGroup.If trunkGrpType is ISDN and the USER sets
the value for Remote Office Type, then this value is
ignored wrw RoffType .1.3.6.1.4.1.4618.1.2.2.3.1.1.6 |
trunkGrpCdrFlagDenotes Cdr Flag : Possible values are:
0) noCdr -> default (No CDR file is required)
1) IC -> for Incoming calls
2) OG -> for Outgoing calls
3) BI -> for both the Incoming and outgoing callsrw CdrFlag .1.3.6.1.4.1.4618.1.2.2.3.1.1.7 |
trunkGrpNoOfTrunksDenotes the Number Of Trunks that are contained in this trunk Groupro INTEGER .1.3.6.1.4.1.4618.1.2.2.3.1.1.8 |
trunkGrpVoicePcmrw VoicePcm .1.3.6.1.4.1.4618.1.2.2.3.1.1.9 |
trunkGrpRowStatusCurrent Status (configurational Status) of this Trunk Group.
To Configure this Link, the only option is 'CREATEANDWAIT'
To Delete this Link, the only option is 'DESTROY'
For the 'GET' Operation, the possible options are
1) active
2) notinservice
3)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.2.3.1.1.10 |
trunkGrpOpStatusCurrent Status (Operational Status) of this Trunk Group.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) downro OpStatus .1.3.6.1.4.1.4618.1.2.2.3.1.1.11 |
rt OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2.4 |
routeTableRoute Table. Information about the Route(s) in MSSC are
provided in this table. The index of this table is routeId (Integer) SEQUENCE OF RouteEntry .1.3.6.1.4.1.4618.1.2.2.4.1 |
routeEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. RouteEntry .1.3.6.1.4.1.4618.1.2.2.4.1.1 |
routeIdRoute Group id. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.4.1.1.1 |
routeAddrTypeCall Control routing type
The possible option are:
1) Call party number
2) Transit Network Selectionrw AddrType .1.3.6.1.4.1.4618.1.2.2.4.1.1.2 |
routeAdrIdCall Control route request nature of address.
The possible options are:
1) National number
2) International number
3) Unknownrw AddrIdentifier .1.3.6.1.4.1.4618.1.2.2.4.1.1.3 |
routeAddrCall Control routing numberrw AddrString .1.3.6.1.4.1.4618.1.2.2.4.1.1.4 |
routeNumPlanCall control route request numbering plan.
The possible options are:
1) Number not present(nonumber)
2) ISDN numbering Plan(isdnnumplan)
3) Telephony numbering plan(telephonynumplan)
4) Private Numbering Plan(privatenumplan)rw NumPlan .1.3.6.1.4.1.4618.1.2.2.4.1.1.5 |
routeNumOfDigitNumber of Digit in the route.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.4.1.1.6 |
routeRouteNameRoute Name. Can be any combination of alphanumeric characters.
Spaces are not allowed.rw NameString .1.3.6.1.4.1.4618.1.2.2.4.1.1.7 |
routeRouteTypeRoute type: SS7/ISDNrw RouteType .1.3.6.1.4.1.4618.1.2.2.4.1.1.8 |
routeRowStatusCurrent Status (configurational Status) of this ROUTE.
To Configure this Route, the only option is 'CREATEANDWAIT'
To Delete this Route, the only option is 'DESTROY'
For the 'GET' Operation, the possible options are
1) active
2) notinservice
3) notrrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.2.4.1.1.9 |
routeOpStatusCurrent Status (Operational Status) of this Route.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) downro OpStatus .1.3.6.1.4.1.4618.1.2.2.4.1.1.10 |
rtEntryIsdnCfgTableRtEntry Isdn Table. Information about the RtEntry(s) in MSSC are
provided in this table.The Table has two indices:
rtEntryIsdnGrpId and rtEntryIsdntrunkId (both Integer). SEQUENCE OF RtEntryIsdnCfgEntry .1.3.6.1.4.1.4618.1.2.2.4.2 |
rtEntryIsdnCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. RtEntryIsdnCfgEntry .1.3.6.1.4.1.4618.1.2.2.4.2.1 |
rtEntryIsdnGrpIdRoute ISDN group id. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.4.2.1.1 |
rtEntryIsdntrunkIdRoute ISDN Trunk id. Can be any integer 1-256.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.4.2.1.2 |
rtEntryIsdnRouteNameRoute ISDN group name. Can be any combination of alphanumeric characters.
Spaces are not allowed and cannot exceed 15 characters.rw NameString .1.3.6.1.4.1.4618.1.2.2.4.2.1.3 |
rtEntryIsdnRowStatusCurrent Status (configurational Status) of this ISDN ROUTE Entry.
To Configure this Link, the only option is 'CREATEANDWAIT'
To Delete this Link, the only option is 'DESTROY'
For the 'GET' Operation, the possible options are
1) active
2) notinservicerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.2.4.2.1.4 |
rtEntryIsdnOpStatusCurrent Status (Operational Status) of this ISDN Route.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) downro OpStatus .1.3.6.1.4.1.4618.1.2.2.4.2.1.5 |
rtEntrySs7CfgTableRtEntry SS7 Table. Information about the RtEntry(s) in MSSC are
provided in this table.The Table has two indices:
rtEntrySs7GrpId and rtEntrySs7CmbLinksetId (both Integer). SEQUENCE OF RtEntrySs7CfgEntry .1.3.6.1.4.1.4618.1.2.2.4.3 |
rtEntrySs7CfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. RtEntrySs7CfgEntry .1.3.6.1.4.1.4618.1.2.2.4.3.1 |
rtEntrySs7GrpIdRoute SS7 group id. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.4.3.1.1 |
rtEntrySs7CmbLinksetIdSS7 Linkset Id which is already configured so far.
An incorrect Linkset Id will result a failure at
the time of 'CREATION' of the RtEntry ie, addition
of the Destination Point Code into the specified
Route will fail.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.4.3.1.2 |
rtEntrySs7RouteNameRoute SS7 group name. Can be any combination of alphanumeric characters
Spaces are not allowed and cannot exceed 15 characters.rw NameString .1.3.6.1.4.1.4618.1.2.2.4.3.1.3 |
rtEntrySs7DpcRoute SS7 Destination Point Code (The Integer Value).
The Point Code should be converted into its Integer
equivalent. For Example:
0-1-1 is converted as 257 (for ANSI)
0-1-2 is converted as 10 (for ITU)rw INTEGER .1.3.6.1.4.1.4618.1.2.2.4.3.1.4 |
rtEntrySs7ModeRoute SS7 Type(ANSI/ITU)rw Standard .1.3.6.1.4.1.4618.1.2.2.4.3.1.5 |
rtEntrySs7RowStatusCurrent Status (configurational Status) of this SS7 Route Entry.
To Configure this Link, the only option is 'CREATEANDWAIT'
To Delete this Link, the only option is 'DESTROY'
For the 'GET' Operation, the possible options are
1) active
2) notinservicerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.2.4.3.1.6 |
rtEntrySs7OpStatusCurrent Status (Operational Status) of this SS7 Route.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) downro OpStatus .1.3.6.1.4.1.4618.1.2.2.4.3.1.7 |
routeMgmntCmdGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2.4.4 |
digitStripMgmntTableRoute Management Command Table. Commands for enabling or disabling
digit stripping in MSSC's routing feature are applied here.
The index for this table is rtName(String). SEQUENCE OF DigitStripMgmntEntry .1.3.6.1.4.1.4618.1.2.2.4.4.1 |
digitStripMgmntEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. DigitStripMgmntEntry .1.3.6.1.4.1.4618.1.2.2.4.4.1.1 |
rtNameRoute Name. Can be any combination of alphanumeric characters.
Spaces are not allowed.ro NameString .1.3.6.1.4.1.4618.1.2.2.4.4.1.1.1 |
rtAddrTypeCall Control route request nature of address.
The possible options are:
1) National number
2) International number
3) Unknownrw AddrIdentifier .1.3.6.1.4.1.4618.1.2.2.4.4.1.1.2 |
rtNumOfDigitNumber of Digit in the route.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.4.4.1.1.3 |
rtMgmntCmdManagement Command for Enabling/Disabling Digit Strip
for MSSC's Routing Feature.
The possible options are :
1) Enable
2) Disable [default]rw EnableOperation .1.3.6.1.4.1.4618.1.2.2.4.4.1.1.4 |
isdnLoadBalanceMgmntTableIsdn Channel Load Balance Command Table. Turning this feature on will
result in distributing all the incoming calls evenly in all the trunks
for the specified route number.
The index for this table is rteName(String). SEQUENCE OF IsdnLoadBalanceMgmntEntry .1.3.6.1.4.1.4618.1.2.2.4.4.2 |
isdnLoadBalanceMgmntEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. IsdnLoadBalanceMgmntEntry .1.3.6.1.4.1.4618.1.2.2.4.4.2.1 |
rteNameRoute Name. Can be any combination of alphanumeric characters.
Spaces are not allowed.rw NameString .1.3.6.1.4.1.4618.1.2.2.4.4.2.1.1 |
ilbMgmntCmdManagement Command for Enabling/Disabling the feature
'ISDN Channel LOAD BALANCE'. When this feature is turned on
all the incoming calls are distributed evenly in all the
trunks for the specified routing numbers.
The possible options are :
1) Enablerw EnableOperation .1.3.6.1.4.1.4618.1.2.2.4.4.2.1.2 |
xconnect OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2.5 |
xconnectCfgTableXConnext Table. Information about XConnect(s) in MSSC are provided
in this table.
The index for this table is xconnectId(Integer). SEQUENCE OF XconnectCfgEntry .1.3.6.1.4.1.4618.1.2.2.5.1 |
xconnectCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. XconnectCfgEntry .1.3.6.1.4.1.4618.1.2.2.5.1.1 |
xconnectIdXconnect id. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.5.1.1.1 |
xconnectNameXconnect name. Can be any combination of alphanumeric characters.
Spaces are not allowed and cannot exceed 15 characters.rw NameString .1.3.6.1.4.1.4618.1.2.2.5.1.1.2 |
xconnectIPAddrXconnect IP address. Submit in xxx.xxx.xxx.xxx format.rw IpAddress .1.3.6.1.4.1.4618.1.2.2.5.1.1.3 |
xconnectTCPPortXconnect TCP port. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.5.1.1.4 |
xconnectRowStatusCurrent Status (configurational Status) of this XConnect.
To Configure this Link, the only option is 'CREATEANDWAIT'
To Delete this Link, the only option is 'DESTROY'
For the 'GET' Operation, the possible options are
1) active
2) notinservice
3) notrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.2.5.1.1.5 |
xconnectOpStatusCurrent Status (Operational Status) of this XConnect.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) downro OpStatus .1.3.6.1.4.1.4618.1.2.2.5.1.1.6 |
xlinkCfgTableXLink Table. Information about XLink(s) in MSSC are provided
in this table.This table has six indices:
xconnectIdEndA, slotIdEndA, portIdEndA,xconnectIdEndB,
xconnectIdEndB,slotIdEndB,portIdEndB (all Integers) SEQUENCE OF XlinkCfgEntry .1.3.6.1.4.1.4618.1.2.2.5.2 |
xlinkCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. XlinkCfgEntry .1.3.6.1.4.1.4618.1.2.2.5.2.1 |
xconnectIdEndAXconnect id for one end. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.5.2.1.1 |
slotIdEndASlot Id of one end.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.5.2.1.2 |
portIdEndAPort id of one end.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.5.2.1.3 |
xconnectIdEndBXconnect id for the other end. Can be any integer 1-65535.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.5.2.1.4 |
slotIdEndBSlot Id of the other end.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.5.2.1.5 |
portIdEndBPort id of the other end.rw INTEGER .1.3.6.1.4.1.4618.1.2.2.5.2.1.6 |
xlinkConnectionTypeConnection Type between the Xconnects
The possible options are :
1) Unchannelised DS3 (ut3)
2) Channelised DS3 (t3)rw ConnectionType .1.3.6.1.4.1.4618.1.2.2.5.2.1.7 |
xlinkRowStatusCurrent Status (configurational Status) of this XCONNECT Link.
To Configure this Link, the only option is 'CREATEANDWAIT'
To Delete this Link, the only option is 'DESTROY'
For the 'GET' Operation, the possible options are
1) active
2) notinservice
3rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.2.5.2.1.8 |
xlinkOpStatusCurrent Status (Operational Status) of this XConnect Link.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) downro OpStatus .1.3.6.1.4.1.4618.1.2.2.5.2.1.9 |
xlinkMgmntTableXLink Management Table.
This table has six indices:
xconnectIdEndA, slotIdEndA, portIdEndA,xconnectIdEndB,
xconnectIdEndB,slotIdEndB,portIdEndB (all Integers) SEQUENCE OF XlinkMgmntEntry .1.3.6.1.4.1.4618.1.2.2.5.3 |
xlinkMgmntEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. XlinkMgmntEntry .1.3.6.1.4.1.4618.1.2.2.5.3.1 |
xconnIdEndAXconnect id for one end. Can be any integer 1-65535.ro INTEGER .1.3.6.1.4.1.4618.1.2.2.5.3.1.1 |
xconnSlotIdEndASlot Id of one end.ro INTEGER .1.3.6.1.4.1.4618.1.2.2.5.3.1.2 |
xconnPortIdEndAPort id of one end.ro INTEGER .1.3.6.1.4.1.4618.1.2.2.5.3.1.3 |
xconnIdEndBXconnect id for the other end. Can be any integer 1-65535.ro INTEGER .1.3.6.1.4.1.4618.1.2.2.5.3.1.4 |
xconnSlotIdEndBSlot Id of the other end.ro INTEGER .1.3.6.1.4.1.4618.1.2.2.5.3.1.5 |
xconnPortIdEndBPort id of the other end.ro INTEGER .1.3.6.1.4.1.4618.1.2.2.5.3.1.6 |
xlinkMgmntCmdManagement Command for Enabling/Disabling XLink
The possible options are :
1) Enable
2) Disable [default]rw EnableOperation .1.3.6.1.4.1.4618.1.2.2.5.3.1.7 |
enableGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.2.6 |
enableSwitchThis is POST-CONFIGURATION command to
ENABLE the switch. The 'GET' operation
will result in the default value (no)
being returned. The possible options are:
1) yes
2) no (Default)rw EnableStatus .1.3.6.1.4.1.4618.1.2.2.6.1 |
enableSS7RouteThis is POST-CONFIGURATION command to
ENABLE the SS7 Route. The 'GET' operation will result in the
default value (no) being returned. The possible options are:
1) yes
2) no (Default)rw EnableStatus .1.3.6.1.4.1.4618.1.2.2.6.2 |
enableSS7CktThis is POST-CONFIGURATION command to
ENABLE the SS7 Circuit. This Command can only be applied
to Enable the SS7 Circuit and COMMIT all the SS7 Circuit Configuration.
The 'GET' operation will result in the default value (no) being
returned. The possibrw EnableStatus .1.3.6.1.4.1.4618.1.2.2.6.3 |
enableIsdntrunkThis is POST-CONFIGURATION command to
ENABLE the ISDN Trunk. This Command can only be applied
to Enable the ISDN Trunk. The 'GET' operation will result in the
default value (no) being returned. The possible options are:
1) yes
2) no (Default)rw EnableStatus .1.3.6.1.4.1.4618.1.2.2.6.4 |
enableXconnectThis is POST-CONFIGURATION command to ENABLE the Xconnect.
The 'GET' operation will result in the default value (no) being
returned. The possible options are:
1) yes
2) no (Default)rw EnableStatus .1.3.6.1.4.1.4618.1.2.2.6.5 |
enableRouteThis is POST-CONFIGURATION command to
ENABLE the ROUTE and COMMIT all the configuration
set for MTP2. This Command can only be applied to Enable the XConnect.
The 'GET' operation will result in the default value (no) being returned.
The possible optiorw EnableStatus .1.3.6.1.4.1.4618.1.2.2.6.6 |
switchMeas OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.3 |
measFile OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.3.1 |
measFileInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.3.1.1 |
measFileAcknowledgeAcknowledgement of the receiving of the specified Measurement filerw DisplayString .1.3.6.1.4.1.4618.1.2.3.1.1.1 |
measFileConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.3.1.2 |
measFileCfgMeasIntervalSwitch Config Measure Interval.
The duration of the collection window (frequency of persisting
collected measurements).
Default: 15 minutes.
Valid Values: 15, 30, 60 minutes. 0 for Disable.rw INTEGER .1.3.6.1.4.1.4618.1.2.3.1.2.1 |
measFileCfgUsagescanIntervalSwitch Config Usage Scan Interval.
The interval between scanning the trunk for usage counts.
Default: 15 seconds
Valid Values: 5 through 300 seconds.rw INTEGER .1.3.6.1.4.1.4618.1.2.3.1.2.2 |
measFileCfgPurgeDayFile Config Purge Day.
After The specified no of days the file in secondary directory are
purged if Measurement File Auto Purge Flag is on.rw INTEGER .1.3.6.1.4.1.4618.1.2.3.1.2.3 |
measFileCfgPurgeFlagFile Config Flag.
This is an auto purge flag.rw MeasPurgeFlag .1.3.6.1.4.1.4618.1.2.3.1.2.4 |
measFileCfgPrimaryDirMeasurement File Primary Dir.
Measurement file is written in this directoryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.3.1.2.5 |
measFileCfgSecondaryDirMeasurement File Secondary Dir.
Measurement file is moved to this directory from Primary Directory
after receving the acknowledgement.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.3.1.2.6 |
measFileEnableGrp OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.3.1.3 |
measFileEnablePRITrafficMeasurement File PRI Traffic Enable Group.
A mechanism for the user to enable collecting of PRI
Traffic measurement data.rw MeasEnableStatus .1.3.6.1.4.1.4618.1.2.3.1.3.1 |
measFileEnableISUPTrafficMeasurement File ISUP Traffic Enable Group.
A mechanism for the user to enable collecting of ISUP
Traffic measurement data.rw MeasEnableStatus .1.3.6.1.4.1.4618.1.2.3.1.3.2 |
measFileEnablePRIIneffectiveCallMeasurement File Enable PRI Ineffective Call Group.
A mechanism for the user to enable collecting of PRI
Ineffective Call Group measurement data.rw MeasEnableStatus .1.3.6.1.4.1.4618.1.2.3.1.3.3 |
measFileEnableISUPIneffectiveCallMeasurement File Enable PRI Ineffective Call Group.
A mechanism for the user to enable collecting of ISUP
Ineffective Call Group Traffic measurement data.rw MeasEnableStatus .1.3.6.1.4.1.4618.1.2.3.1.3.4 |
measFileEnableTrunkGrpMeasurement File Enable Trunk Group.
A mechanism for the user to enable collecting of Trunk
Group Traffic measurement data.rw MeasEnableStatus .1.3.6.1.4.1.4618.1.2.3.1.3.5 |
measFileEnableSS7LinkTrafficMeasurement File Enable SS7 Link Traffic Group.
A mechanism for the user to enable collecting of SS7 Link
Traffic measurement data.rw MeasEnableStatus .1.3.6.1.4.1.4618.1.2.3.1.3.6 |
measSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.3.2 |
measSwitchIsupGrp OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.3.2.1 |
measSwitchIsupDataSuspectSwitch Isup Data Suspect.
Boolean value indicating if the measurement data set is suspect.
Suspect data is that which may or may not be accurate and cannot be
verified accurate due to a some condition that occurred during the
collection intervalro Counter .1.3.6.1.4.1.4618.1.2.3.2.1.1 |
measSwitchIsupIncomingAnsiTrunkCallAttemptsSwitch Isup Incoming Ansi Trunk Call Attempts.
The number of incoming ISUP-ANSI trunk call requests.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.1.2 |
measSwitchIsupIncomingAnsiTrunkCallAnsweredSwitch Isup Incoming Ansi Trunk Call Answered.
The number of incoming ISUP-ANSI trunk calls answered.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.1.3 |
measSwitchIsupOutgoingAnsiTrunkCallAttemptsSwitch Isup Outgoing Ansi Trunk Call Attempts.
The number of outgoing ISUP-ANSi trunk call requests.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.1.4 |
measSwitchIsupOutgoingAnsiTrunkCallAnsweredSwitch Isup Outgoing Ansi Trunk Call Answered.
The number of outgoing ISUP-ANSI trunk calls answered.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.1.5 |
measSwitchIsupIncomingItutTrunkCallAttemptsSwitch Isup Incoming Itut Trunk Call Attempts.
The number of incoming ISUP-ITUT trunk call requests.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.1.6 |
measSwitchIsupIncomingItutTrunkCallAnsweredSwitch Isup Incoming Itut Trunk Call Answered.
The number of incoming ISUP-ITUT trunk calls answered.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.1.7 |
measSwitchIsupOutgoingItutTrunkCallAttemptsSwitch Isup Outgoing Itut Trunk Call Attempts.
The number of outgoing ISUP-ITUT trunk call requests.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.1.8 |
measSwitchIsupOutgoingItutTrunkCallAnsweredSwitch Isup Outgoing Itut Trunk Call Answered.
The number of outgoing ISUP-ITUT trunk calls answered.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.1.9 |
measSwitchIsupFailCallGrp OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.3.2.2 |
measSwitchIsupFailCallDataSuspectSwitch Isup Fail Call Data Suspect.
Boolean value indicating if the measurement data set is suspect.
Suspect data is that which may or may not be accurate and cannot
be verified accurate due to a some condition that occurred during
the collection intero Counter .1.3.6.1.4.1.4618.1.2.3.2.2.1 |
measSwitchIsupFailCallAnsiMatchingLossSwitch Isup Fail Call Ansi Matching Loss.
The number of calls ISUP-ANSI trunk calls that fail to find a linked
cross-connect within XCMs on any stage of the call.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.2.2 |
measSwitchIsupFailCallAnsiNoCircuitSwitch Isup Fail Call Ansi No Circuit.
The number of ISUP-ANSI calls that cannot forwarded on a trunk because:
* No idle PRI trunks available
* No cross-connect available between XCMs.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.2.3 |
measSwitchIsupFailCallAnsiCalledPartyLineBusySwitch Isup Fail Call Ansi Called Party Line Busy.
The number of ISUP-ANSI calls that result in a called party busy
indication returned to the caller.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.2.4 |
measSwitchIsupFailCallAnsiIneffectiveMachineAttemptsSwitch Isup Fail Call Ansi Ineffective Machine Attempts.
The number of ISUP-ANSI call ineffective machine attempts that
have not been associated with any of the following:
* Matching loss
* No circuit
* Called party line busy.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.2.5 |
measSwitchIsupFailCallItutMatchingLossSwitch Isup Fail Call Itut Matching Loss.
The number of calls ISUP-ITUT trunk calls that fail to find a
linked cross-connect within XCMs on any stage of the call.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.2.6 |
measSwitchIsupFailCallItutNoCircuitSwitch Isup Fail Call Itut No Circuit.
The number of ISUP-ITUT calls that cannot be forwarded on a
trunk because:
* No idle PRI trunks available
* No cross-connect available between XCMs.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.2.7 |
measSwitchIsupFailCallItutCalledPartyLineBusySwitch Isup Fail Call Itut Called Party Line Busy.
The number of ISUP-ITUT calls that result in a called
party busy indication returned to the caller.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.2.8 |
measSwitchIsupFailCallItutIneffectiveMachineAttemptsSwitch Isup Fail Call Itut Ineffective Machine Attempts.
The number of ISUP-ITUT call ineffective machine attempts that
have not been associated with any of the following:
* Matching loss
* No circuit
* Called party line busy.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.2.9 |
measSwitchPriGrp OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.3.2.3 |
measSwitchPriDataSuspectSwitch Primary Data Suspect.
Boolean value indicating if the measurement data set is suspect.
Suspect data is that which may or may not be accurate and cannot
be verified accurate due to a some condition that occurred during
the collection interval.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.3.1 |
measSwitchPriIncomingIsdnPRICallAttemptsSwitch PRI Incoming ISDN PRI Call Attempts.
The number of Incoming ISDN trunk call requests.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.3.2 |
measSwitchPriIncomingIsdnPRICallAnsweredSwitch PRI Incoming ISDN PRI Call Answered.
The number of Incoming ISDN trunk calls answered.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.3.3 |
measSwitchPriFailCallGrp OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.3.2.4 |
measSwitchPriFailCallDataSuspectSwitch ISDN PRI Fail Call Data Suspect.
Boolean value indicating if the measurement data set is suspect.
Suspect data is that which may or may not be accurate and cannot
be verified accurate due to a some condition that occurred during
the collectionro Counter .1.3.6.1.4.1.4618.1.2.3.2.4.1 |
measSwitchPriFailCallMatchingLossSwitch ISDN PRI Fail Call Matching Loss.
The number of calls PRI trunk calls that fail to find a linked
cross-connect within XCM on any stage of the call.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.4.2 |
measSwitchPriFailCallNoCircuitSwitch ISDN PRI Fail Call No Circuit.
The number of PRI calls that cannot be forwarded on a trunk because:
* No idle PRI trunks available
* No cross-connect available between XCMs.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.4.3 |
measSwitchPriFailCallCalledPartyLineBusySwitch ISDN PRI Fail Call Called Party Line Busy.
The number of PRI calls that result in a called party busy
indication returned to the caller.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.4.4 |
measSwitchPriFailCallIneffectiveMachineAttemptsSwitch ISDN PRI Fail Call Ineffective Machine Attempts.
The number of PRI call ineffective machine attempts that have
not been associated with any of the following:
* Matching loss
* No circuit
* Called party line busy.ro Counter .1.3.6.1.4.1.4618.1.2.3.2.4.5 |
measTrnkGrp OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.3.3 |
measTrnkGrpTrafficTableSwitch Measurement for Trunk Group traffic Table. Information about Trunk
Group traffic measurement are provoded in this table.
The index for this table is measTrnkGrpName(String). SEQUENCE OF MeasTrnkGrpTrafficEntry .1.3.6.1.4.1.4618.1.2.3.3.1 |
measTrnkGrpTrafficEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. MeasTrnkGrpTrafficEntry .1.3.6.1.4.1.4618.1.2.3.3.1.1 |
measTrnkGrpNameTrunk Group Name. Can be any combination of alphanumeric characters.
Spaces are not allowed and cannot exceed 15 characters.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.3.3.1.1.1 |
measTrnkGrpDataSuspectTrunk Group Data Suspect. Boolean value indicating if the measurement
data set is suspect. Suspect data is that which may or may not be accurate
and cannot be verified accurate due to some condition that occurred during
the collection interval.ro INTEGER .1.3.6.1.4.1.4618.1.2.3.3.1.1.2 |
measTrnkGrpincomingUsageTrunk Group Incoming Usage. The sum of the counts of the number of
incoming trunks in the use.ro INTEGER .1.3.6.1.4.1.4618.1.2.3.3.1.1.3 |
measTrnkGrpoutgoingUsageTrunk Group Outgoing Usage. The sum of the counts of the number of
outgoing trunks in the use.ro INTEGER .1.3.6.1.4.1.4618.1.2.3.3.1.1.4 |
measTrnkGrpISCicsChnlsTrunk Group Inservice Cic/Channels. The sum of the counts of the
number of Inservice circuits in case SS7 TrunkGroup or Inservice
Channels in case of ISDN TRunkGroup.ro INTEGER .1.3.6.1.4.1.4618.1.2.3.3.1.1.5 |
measTrnkGrpOOSCicsChnlsTrunk Group OutOfservice Cic/Channels. The sum of the counts of the
number of OutOfservice circuits in case SS7 TrunkGroup or OufOfservice
Channels in case of ISDN TRunkGroup.ro INTEGER .1.3.6.1.4.1.4618.1.2.3.3.1.1.6 |
measTrnkGrptotalUsageTrunk Group Total Usage. The sum of number of trunk in use by both
incoming and outgoing traffic.ro INTEGER .1.3.6.1.4.1.4618.1.2.3.3.1.1.7 |
measTrnkGrpmaintainanceUsageTrunk Group Maintenance Usage. The sum of number of trunk in use
for any reason other than traffic.ro INTEGER .1.3.6.1.4.1.4618.1.2.3.3.1.1.8 |
measLnk OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.3.4 |
measLinkTrafficTableSwitch Measurement per SS7 Link traffic Table. Information about traffic
measurement per SS7 Link are provoded in this table.
The index for this table is measLinkName(String). SEQUENCE OF MeasLinkTrafficEntry .1.3.6.1.4.1.4618.1.2.3.4.1 |
measLinkTrafficEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. MeasLinkTrafficEntry .1.3.6.1.4.1.4618.1.2.3.4.1.1 |
measLinkNameSS7 Link namero NameString .1.3.6.1.4.1.4618.1.2.3.4.1.1.1 |
measLinkDataSuspectLink Data Suspect. Boolean value indicating if the measurement data
set is suspect. Suspect data is that which may or may not be accurate
and cannot be verified accurate due to some condition that occurred
during the collection interval.ro INTEGER .1.3.6.1.4.1.4618.1.2.3.4.1.1.2 |
measLinkUnavailableDurationLink Unavailable Duration. The cumulative time (in sconds) that the
link was unavailable during the associated time interval (CS)ro INTEGER .1.3.6.1.4.1.4618.1.2.3.4.1.1.3 |
measLinkInServiceDurationLink In Service Duration. The cumulative time (in seconds) during
which the link was in the in-service state. A link is said to be in-
service when it is capable of transmitting MSUs. This measurement
includes periods when no MSUs are available for traro INTEGER .1.3.6.1.4.1.4618.1.2.3.4.1.1.4 |
measLinkMSUsRetransmittedLink MSUs Retransmitted. The number of MSUs retransmitted via a
particular link during the associated time period (CS)ro INTEGER .1.3.6.1.4.1.4618.1.2.3.4.1.1.5 |
measLinkOctetsReceivedLink Octers Received. The number of SIF and SIO octets received
on the associate incoming link (CS)ro INTEGER .1.3.6.1.4.1.4618.1.2.3.4.1.1.6 |
measLinkOctectsTransmittedLink Octets Transmitted. The number of SIF and SIO octets
transmitted (including those retransmitted) on the associated
incoming link (CS)ro INTEGER .1.3.6.1.4.1.4618.1.2.3.4.1.1.7 |
measLinkLostMSUsBufferOverflowLink Lost MSUs Buffer Overflow. The number of MSUs lost because of
transmission buffer overflow (CS)ro INTEGER .1.3.6.1.4.1.4618.1.2.3.4.1.1.8 |
measLinkMSUsDiscardedLink MSUs Discarded. This measurement is a count of number of MSUs
discarded.ro INTEGER .1.3.6.1.4.1.4618.1.2.3.4.1.1.9 |
switchCdr OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.4 |
cdrConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.4.1 |
cdrLongDurCallGenTimeThe Time of the day that the syatem will generate the long
duration call.
CDR Format ( HHMM )
Valid time of the day from 0000 - 2359rw INTEGER .1.3.6.1.4.1.4618.1.2.4.1.1 |
cdrBafConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.4.2 |
cdrAppendModule801Indicates if the Armillaire Proprietary Module 801 should
be appended to those BAF Records.
Text Format ( Not Case sensitive )
Valid values : yes, norw Bool .1.3.6.1.4.1.4618.1.2.4.2.1 |
cdrSensorIdAMA Sensor Id code of the switch.
Valid values 000001-999998 for Set.
If not configured then Default value is 0.rw INTEGER .1.3.6.1.4.1.4618.1.2.4.2.2 |
cdrRecordingOfficeIdAMA Record Id code of the switch.
Valid values 000001-999998 For Set.
If not configured then Default value is 0.rw INTEGER .1.3.6.1.4.1.4618.1.2.4.2.3 |
cdrFileConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.4.3 |
cdrFileIntervalHow often the cdr file being generated.
Valid values 1-86400 secondsrw INTEGER .1.3.6.1.4.1.4618.1.2.4.3.1 |
cdrFileRecLimitMaximum Nubler of BAF records in a CDR File.
Valid values 1,677,215rw INTEGER .1.3.6.1.4.1.4618.1.2.4.3.2 |
cdrFileSourceIdThis Source Component id specifies the network element for
receiving of cdr files according to AMADNS. This id will be
part of first node of CDR filename.
Valid values 01-4095 For Set.
If not configured then Default value is 0.rw INTEGER .1.3.6.1.4.1.4618.1.2.4.3.3 |
cdrFileDestinationTypeThis Destination Component type specifies the network
element for receiving of cdr files according to AMADNS.
This type will be part of second node of CDR filename.
Valid values 01-15 For Set.
If not configured then Default value is 0.rw INTEGER .1.3.6.1.4.1.4618.1.2.4.3.4 |
cdrFileDestinationIdThis Destination Component Id specifies the network
element for receiving of cdr files according to AMADNS.
This type will be part of second node of CDR filename.
Valid values 01-4095 for Set.
If not configured then Default value is 0.rw INTEGER .1.3.6.1.4.1.4618.1.2.4.3.5 |
cdrFileInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.4.4 |
cdrFileQueryNumber of the desired CDR file.
set file number to update the cdr file info.rw INTEGER .1.3.6.1.4.1.4618.1.2.4.4.1 |
cdrFileNameName of the desired CDR file. Can be any combination of
alphanumeric characters. Spaces are not allowed. Filename cannot
exceed 24 characters.ro DisplayString .1.3.6.1.4.1.4618.1.2.4.4.2 |
cdrFileStatusStatus of the desired CDR filero INTEGER .1.3.6.1.4.1.4618.1.2.4.4.3 |
cdrFileCreateDateCreation date of the desired CDR file
FORMAT:2000/01/26ro DisplayString .1.3.6.1.4.1.4618.1.2.4.4.4 |
cdrFileCreateTimeCreation time of the desired CDR file
FORMAT: 20:12:23ro DisplayString .1.3.6.1.4.1.4618.1.2.4.4.5 |
cdrFileRecordNumRecord number of the desired CDR filero INTEGER .1.3.6.1.4.1.4618.1.2.4.4.6 |
cdrFileAcknowledgeAcknowledgement of the CDR file. The input should be the File Name.rw DisplayString .1.3.6.1.4.1.4618.1.2.4.4.7 |
cdrMgmntCmdGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.4.5 |
cdrGenMgmntCmdThis command is used to turn on the CDR generation
for the entire switch.If switch CDR generation is enabled
then CDR generation can be enabled/disabled on Trunk Group.
The possible options are :
1) Enable
2) Disable [default]rw EnableOperation .1.3.6.1.4.1.4618.1.2.4.5.1 |
cdrMngmtTrnkGrpTableCDR Management Command for Trunk group Table.
The index for this table is cdrTrnkGrpId (integer) SEQUENCE OF CdrMngmtTrnkGrpEntry .1.3.6.1.4.1.4618.1.2.4.5.2 |
cdrMngmtTrnkGrpEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. CdrMngmtTrnkGrpEntry .1.3.6.1.4.1.4618.1.2.4.5.2.1 |
cdrTrnkGrpIdThe trunk Group Id.ro INTEGER .1.3.6.1.4.1.4618.1.2.4.5.2.1.1 |
cdrTrnkGrpdirectionThe Directionrw CdrFlag .1.3.6.1.4.1.4618.1.2.4.5.2.1.2 |
cdrTrnkGrpMgmntCmdThis command is used to turn on the CDR generation
on the Trunk Group.
The possible options are :
1) Enable
2) Disable [default]rw EnableOperation .1.3.6.1.4.1.4618.1.2.4.5.2.1.3 |
switchFeature OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.5 |
modemFaultDetection OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.5.1 |
modemStatusTableFaulty Modem Detection Table. This Table provides information
about all the potentially faulty modems in MSSC.
This table has two indices:
faultModemTrnkId and faultModemChnlId (both Integer) SEQUENCE OF ModemStatusEntry .1.3.6.1.4.1.4618.1.2.5.1.1 |
modemStatusEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. ModemStatusEntry .1.3.6.1.4.1.4618.1.2.5.1.1.1 |
faultModemTrnkIdThe terminating Channel trunk Id.ro INTEGER .1.3.6.1.4.1.4618.1.2.5.1.1.1.1 |
faultModemChnlIdThe terminating Channel Channel Id.ro INTEGER .1.3.6.1.4.1.4618.1.2.5.1.1.1.2 |
faultModemRepnumCounterro INTEGER .1.3.6.1.4.1.4618.1.2.5.1.1.1.3 |
faultModemResetThe Option for Reseting the terminating Channel.
A 'GET' operation on this object will display the
default value [no].
The possible option for 'SET' operation is
1) YESrw ModemResetStatus .1.3.6.1.4.1.4618.1.2.5.1.1.1.4 |
lnp OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.5.2 |
lrnTableLocal Routing Number Table. This Table provides information
about Local Routing number in MSSC.
This table has the index lrnId (Integer) SEQUENCE OF LrnEntry .1.3.6.1.4.1.4618.1.2.5.2.1 |
lrnEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. LrnEntry .1.3.6.1.4.1.4618.1.2.5.2.1.1 |
lrnNumThe Local Routing Number (LRN) Id.rw DisplayString .1.3.6.1.4.1.4618.1.2.5.2.1.1.1 |
lrnRowStatusThe Local Routing Number (LRN) Number.rw LrnRowStatus .1.3.6.1.4.1.4618.1.2.5.2.1.1.2 |
switchDSP OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.5.3 |
switchDSPCfgTable SEQUENCE OF SwitchDSPCfgEntry .1.3.6.1.4.1.4618.1.2.5.3.1 |
switchDSPCfgEntryDSP Configuration Table. This Table provides information
about the DSP card(s) in MSSC.
This table has two indices:
switchDSPXconnId and switchDSPSlotId (both Integer) SwitchDSPCfgEntry .1.3.6.1.4.1.4618.1.2.5.3.1.1 |
switchDSPXconnIdXconnect Id for which DSP card is being configuredrw INTEGER .1.3.6.1.4.1.4618.1.2.5.3.1.1.1 |
switchDSPSlotIdThe Slot id at which the DSP card is being configured.rw INTEGER .1.3.6.1.4.1.4618.1.2.5.3.1.1.2 |
switchDSPCardTypeThe card Type. The possible options are :
1) DSP2B
2) DSP2Crw DSPCardType .1.3.6.1.4.1.4618.1.2.5.3.1.1.3 |
switchDSPCfgRowStatusCurrent Status (configurational Status) of this Switch DSP.
To Configure this Link, the only option is 'CREATEANDWAIT'
To Delete this Link, the only option is 'DESTROY'
For the 'GET' Operation, the possible options are
1) active
2) notinservice
3) nrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.5.3.1.1.4 |
switchDSPCfgOpStatusCurrent Status (Operational Status) of this Switch DSP.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) downro OpStatus .1.3.6.1.4.1.4618.1.2.5.3.1.1.5 |
switchTGFeature OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.5.4 |
switchFeatureTGCfgTableTrunk Group Feature Table. This Table provides information
about the Trunk Group Feature(s) in MSSC.
This table has one indices: switchFeatureTGId (Integer) SEQUENCE OF SwitchFeatureTGCfgEntry .1.3.6.1.4.1.4618.1.2.5.4.1 |
switchTGGrpCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. SwitchFeatureTGCfgEntry .1.3.6.1.4.1.4618.1.2.5.4.1.1 |
switchFeatureTGIdDenotes Id for this trunk group.ro INTEGER .1.3.6.1.4.1.4618.1.2.5.4.1.1.1 |
switchFeatureTGNameDenotes Name of this trunk group.
The Name is a string of length 8. The first two characters
of Name have to be an alphabhet. The next 6 characters are
numeric. An example of a valid Trunk Group Name is ab123456.
NOTE: This format needs to strictly foro NameString .1.3.6.1.4.1.4618.1.2.5.4.1.1.2 |
switchFeatureTGTypeDenotes Trunk group type. Possible values for Trunk group are:
1. ss7
2. isdnro TrnkGrpType .1.3.6.1.4.1.4618.1.2.5.4.1.1.3 |
switchFeatureTGFeatureECDenotes Echo Cancellation feature. Possible Values are:
1. Enable
2. Disable
NOTE: If TrunkGrpType is ISDN, then Enabling Echo Cancellation
feature is an INVALID Operation. A 'GET' Operation at
this object will ALWAYS result in the default value
[dirw TGFeature .1.3.6.1.4.1.4618.1.2.5.4.1.1.4 |
switchFeatureTGFeatureCOMPRESSDenotes Compression feature. Possible Values are:
1. Enable
2. Disable
NOTE: if TrunkGrpType is ISDN, then Enabling Compression
feature, is an INVALID Operation. A 'GET' Operation at
this object will ALWAYS result in the default value
[disable] beinrw TGFeature .1.3.6.1.4.1.4618.1.2.5.4.1.1.5 |
switchFeatureTGFeatureSSDenotes Silent Supression feature. Possible Values are:
1. Enable
2. Disable
NOTE: If TrunkGrpType is ISDN, the Enabling Silent Supression
feature, is an INVALID Operation. A 'GET' Operation at
this object will ALWAYS result in the default value
[dirw TGFeature .1.3.6.1.4.1.4618.1.2.5.4.1.1.6 |
switchFeatureTGFeatureCNISDenotes Caller Number Identitication Service (CNIS) feature. Possible Values are:
1. Enable
2. Disable
NOTE: If TrunkGrpType is SS7, then Enabling Caller Number
Identitication Service, is an INVALID Operation. A 'GET'
Operation at this object will ALrw TGFeature .1.3.6.1.4.1.4618.1.2.5.4.1.1.7 |
switchMaintenance OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6 |
ft OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6.1 |
ftSwitchOverInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6.1.1 |
switchOverFT Switch Over command. The possible options are
1) FT_SIG
2) FT_ICC
3) FT_ISDN
4) FT_SPHR
5) FT_LM
Select any one and set that option.rw FTswitchOver .1.3.6.1.4.1.4618.1.2.6.1.1.1 |
log OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6.2 |
logFileInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6.2.1 |
logGenTimeSwitch Log Generation Time. The Parameter Time-interval
determines the period of generating new log files. When
the time interval is reached, all the current open log
files are closed and new log files are generated for future
log. The unit for the tirw INTEGER .1.3.6.1.4.1.4618.1.2.6.2.1.1 |
logPurgeTimeSwitch Log Deletion Time. The Parameter Time-interval
determines the period of purging old log files. When
the time interval is reached, all the log files older
than this time-interval are deleted. The unit for the
time-interval is 'minute'.rw INTEGER .1.3.6.1.4.1.4618.1.2.6.2.1.2 |
logFileGenEnable OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6.2.2 |
enablelogGenThis option enables the log file Generation.
1) ALARM_LOG
2) AUDIT_LOG
3) MEAS_LOG
4) DIAG_LOG
5) SCRTY_LOG
6) EVENT_LOG
7) BILL_LOG
8) EMP_LOG
9) LOG_ALL
Choose any one from drop down list...rw LogFileEnDis .1.3.6.1.4.1.4618.1.2.6.2.2.1 |
disableLogGenThis option disables the log file Generation.
1) ALARM_LOG
2) AUDIT_LOG
3) MEAS_LOG
4) DIAG_LOG
5) SCRTY_LOG
6) EVENT_LOG
7) BILL_LOG
8) EMP_LOG
9) LOG_ALL
Choose any one from drop down list..rw LogFileEnDis .1.3.6.1.4.1.4618.1.2.6.2.2.2 |
logFileAttribute OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6.2.3 |
logAttributeAllows the user to inquire about the current LOG file attributes.
The possible options are :
1) ALARM_LOG
2) AUDIT_LOG
3) MEAS_LOG
4) DIAG_LOG
5) SCRTY_LOG
6) EVENT_LOG
7) BILL_LOG
8) EMP_LOG
Choose any one from drop down list..rw LogFileAttr .1.3.6.1.4.1.4618.1.2.6.2.3.1 |
logFileSizero INTEGER .1.3.6.1.4.1.4618.1.2.6.2.3.2 |
logFileDurationro INTEGER .1.3.6.1.4.1.4618.1.2.6.2.3.3 |
logFileStatusro INTEGER .1.3.6.1.4.1.4618.1.2.6.2.3.4 |
trace OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6.3 |
ss7LnkTrace OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6.3.1 |
ss7LnkTraceTableThis Table is specified for Applying Trace Function for any SS7 Link(s).
The index of this table is ss7LnkId (integer) SEQUENCE OF Ss7LnkTraceEntry .1.3.6.1.4.1.4618.1.2.6.3.1.1 |
ss7LnkTraceEntry Ss7LnkTraceEntry .1.3.6.1.4.1.4618.1.2.6.3.1.1.1 |
ss7LnkIdThe SS7 link Id on which the Trace Function is to be applied.ro INTEGER .1.3.6.1.4.1.4618.1.2.6.3.1.1.1.1 |
ss7LnkLogThis option displays weather log Function is enabled for
the specified SS7 Link.ro LogType .1.3.6.1.4.1.4618.1.2.6.3.1.1.1.2 |
ss7LnkEnableThis option enables/disables the trace Function for
the specified SS7 Link.
The possible option are:
1) Enable
2) Disable [default]rw EnableTrace .1.3.6.1.4.1.4618.1.2.6.3.1.1.1.3 |
ss7RouteTrace OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6.3.2 |
ss7RouteTraceTableThis Table is specified for Applying Trace Function for any SS7 Route(s).
The index of this table is ss7RouteDpc (Integer) SEQUENCE OF Ss7RouteTraceEntry .1.3.6.1.4.1.4618.1.2.6.3.2.1 |
ss7RouteTraceEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. Ss7RouteTraceEntry .1.3.6.1.4.1.4618.1.2.6.3.2.1.1 |
ss7RouteDpcThe SS7 Point code. The trace Function is to be applied on this route.ro INTEGER .1.3.6.1.4.1.4618.1.2.6.3.2.1.1.1 |
ss7RouteLogThis option displays weather Log Function is enabled for
the specified SS7 Route.ro LogType .1.3.6.1.4.1.4618.1.2.6.3.2.1.1.2 |
ss7RouteEnableThis option enables/disables the trace Functions for
the specified SS7 Route.
The possible option are:
1) Enable
2) Disable [default]rw EnableTrace .1.3.6.1.4.1.4618.1.2.6.3.2.1.1.3 |
isdnTrnkTrace OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6.3.3 |
isdnTrunkTraceTableThis Table is specified for Applying Trace Function for any ISDN Trunk(s).
The index of this table is isdnTrnkId (Integer) SEQUENCE OF IsdntrunkTraceEntry .1.3.6.1.4.1.4618.1.2.6.3.3.1 |
isdnTrunkTraceEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. IsdntrunkTraceEntry .1.3.6.1.4.1.4618.1.2.6.3.3.1.1 |
isdnTrnkIdThe ISDN Trunk Id for which the Trace Function is to be applied.ro INTEGER .1.3.6.1.4.1.4618.1.2.6.3.3.1.1.1 |
isdnTrunkLogThis option displays weather log Function is enabled for
the specified ISDN Trunk.ro LogType .1.3.6.1.4.1.4618.1.2.6.3.3.1.1.2 |
isdnTrunkEnableThis option enables/disables the trace Functions for
the specified ISDN Trunk.
The possible option are:
1) Enable
2) Disable [default]rw EnableTrace .1.3.6.1.4.1.4618.1.2.6.3.3.1.1.3 |
processStatus OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6.4 |
processStatusInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6.4.1 |
statusLM1ProcIdIndicates the current status of FT_LM: Process Id 512.ro ProcessStatus .1.3.6.1.4.1.4618.1.2.6.4.1.1 |
statusLM2ProcIDIndicates the current status of FT_LM: Process Id 511.ro ProcessStatus .1.3.6.1.4.1.4618.1.2.6.4.1.2 |
statusICC1ProcIdIndicates the current status of FT_ICC : Process Id 480.ro ProcessStatus .1.3.6.1.4.1.4618.1.2.6.4.1.3 |
statusICC2ProcIdIndicates the current status of FT_ICC: Process Id 496.ro ProcessStatus .1.3.6.1.4.1.4618.1.2.6.4.1.4 |
statusISDN1ProcIdIndicates the current status of FT_ISDN: Process Id 476.ro ProcessStatus .1.3.6.1.4.1.4618.1.2.6.4.1.5 |
statusISDN2ProcIdIndicates the current status of FT_ISDN: Process Id 472.ro ProcessStatus .1.3.6.1.4.1.4618.1.2.6.4.1.6 |
statusSPHR1ProcIdIndicates the current status of FT_SPHR: Process Id 448.ro ProcessStatus .1.3.6.1.4.1.4618.1.2.6.4.1.7 |
statusSPHR2ProcIdIndicates the current status of FT_SPHR: Process Id 464.ro ProcessStatus .1.3.6.1.4.1.4618.1.2.6.4.1.8 |
statusSIG1ProcIdIndicates the current status of FT_SIG: Process Id 384.ro ProcessStatus .1.3.6.1.4.1.4618.1.2.6.4.1.9 |
statusSIG2ProcIdIndicates the current status of FT_SIG: Process Id 400.ro ProcessStatus .1.3.6.1.4.1.4618.1.2.6.4.1.10 |
statusMTP21ProcIdIndicates the current status of Mtp2: Process Id 320.ro ProcessStatus .1.3.6.1.4.1.4618.1.2.6.4.1.11 |
statusMTP22ProcIdIndicates the current status of Mtp2: Process Id 321.ro ProcessStatus .1.3.6.1.4.1.4618.1.2.6.4.1.12 |
statusMTP23ProcIdIndicates the current status of Mtp2 : Process Id 322.ro ProcessStatus .1.3.6.1.4.1.4618.1.2.6.4.1.13 |
statusMTP24ProcIdIndicates the current status of Mtp2: Process Id 323.ro ProcessStatus .1.3.6.1.4.1.4618.1.2.6.4.1.14 |
ethernetConnStatusInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6.5 |
ethernetConnStatusCurrent Status of the Ethernet Connection to MSSC.
'SET' Operation is NOT APPLICABLE.
For the 'GET' Operation, the possible options are
1) active
2) downro EthernetConnStatus .1.3.6.1.4.1.4618.1.2.6.5.1 |
audit OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6.6 |
auditInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6.6.1 |
auditISDNTrnkTableAudit ISDN Trunk Table.
This table has one index: auditTrnkId (Integer) SEQUENCE OF AuditISDNTrnkCfgEntry .1.3.6.1.4.1.4618.1.2.6.6.1.1 |
auditISDNTrnkCfgEntryThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. AuditISDNTrnkCfgEntry .1.3.6.1.4.1.4618.1.2.6.6.1.1.1 |
auditTrnkIdThe ISDN Trunk Id on which the audit operation is being applied.ro INTEGER .1.3.6.1.4.1.4618.1.2.6.6.1.1.1.1 |
auditISDNTrnkThis Object is set to Apply Audit on this particular ISDN Trunk.
The possible option for 'SET' is
1) audit
A 'GET' Operation on this object would result the default value
'no action' being displayed.rw AuditOperation .1.3.6.1.4.1.4618.1.2.6.6.1.1.1.2 |
auditXLinkThis option audits the All the existing XLinks.rw AuditOperation .1.3.6.1.4.1.4618.1.2.6.6.1.2 |
auditDPCTableThe Current Entry Containes all the objects for this Table.
This object is not-accessible, but the user can access all
the objects in this table at the next level. SEQUENCE OF AuditDPCCfgEntry .1.3.6.1.4.1.4618.1.2.6.6.1.3 |
auditDPCCfgEntry AuditDPCCfgEntry .1.3.6.1.4.1.4618.1.2.6.6.1.3.1 |
auditPointCodeThe Point Code on which the audit operation is being applied.ro INTEGER .1.3.6.1.4.1.4618.1.2.6.6.1.3.1.1 |
auditPointCodeTypeThe Point Code Type. Ansi/Itu.ro AuditType .1.3.6.1.4.1.4618.1.2.6.6.1.3.1.2 |
auditDPCThis Object is set to Apply Audit on this particular DPC.
The possible option for 'SET' is
1) audit
A 'GET' Operation on this object would result the default value
'no action' being displayed.rw AuditOperation .1.3.6.1.4.1.4618.1.2.6.6.1.3.1.3 |
auditPeriodGrp OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.6.6.1.4 |
auditTimePeriodThe Audit Period for which the audit operation is being applied.rw INTEGER .1.3.6.1.4.1.4618.1.2.6.6.1.4.1 |
auditPeriodThis Object is set to Apply Audit for this particular Period.
The possible option for 'SET' is
1) audit
A 'GET' Operation on this object would result the default value
'no action' being displayed.rw AuditOperation .1.3.6.1.4.1.4618.1.2.6.6.1.4.2 |
switchTrap OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.7 |
trapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.7.1 |
trapOpcIndicate the point code of the switch that send trapro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.1 |
trapXconnectIdIndicate the id of the xconnect that send trapro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.2 |
trapLinkIdIndicate the id of the link that abnormal situationro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.3 |
trapSlotIdIndicate the id of the slot that has abnormal situationro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.4 |
trapPortIdIndicate the id of the port that has abnormal situationro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.5 |
trapTrunkIdIndicate the id of the trunk that has abnormal situationro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.6 |
trapInterfaceIdIndicate the id of the interface that has abnormal situationro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.7 |
trapChnlIdIndicate the id of the channel that has abnormal situationro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.8 |
trapDbIdIndicate the id of the database that has abnormal situationro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.9 |
trapLinkNameIndicate the name of the link that has abnormal situationro NameString .1.3.6.1.4.1.4618.1.2.7.1.10 |
trapSwitchNameIndicate the namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.7.1.11 |
trapCicvalueIndicate Circuit Identification Code value.ro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.12 |
trapCicrangeInteger identifying the range ex. no. cics.ro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.13 |
trapCauseCause indicates Causes for ISUP related alarms: BLOCKING UNBLOCKING INVALIDRNG GROUPBLOCKING GROUPUNBLOCKACK RESETCIRCUIT RESETRELCOMP GROUPRESETCIRCUIT GROUPRESETACK CIRCUITQUERYRESP VALIDATIONSUCCESS VALIDATIONFAILED VALIDATIONFAILEDWRONGCLLI OTHERSro DisplayString .1.3.6.1.4.1.4618.1.2.7.1.14 |
trapDpcIndicate the point code of the switchro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.15 |
trapCdrFileSeqNumIndicate the sequence number of the cdr file that has
abnormal situationro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.16 |
trapCdrFileNameIndicates the CDR file name or file directory. Can be any combination of
alphanumeric characters. Spaces are allowed and cannot
exceed 255 characters.ro DisplayString .1.3.6.1.4.1.4618.1.2.7.1.17 |
trapMeasErrCauseIndicates the Measurement Files error operation causero INTEGER .1.3.6.1.4.1.4618.1.2.7.1.18 |
trapMeasErrNumIndicates the Measurement Files error number of the operationro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.19 |
trapRepeatNumIndicate the count that trap has occuredro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.20 |
trapSeverityIndicate the severity of the sent trapro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.7.1.21 |
trapProcessIdIndicate the process id for that trap has occuredro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.22 |
trapBucketSizeIndicate the process Bucket size for the Process for which the trap has occuredro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.23 |
trapNode1IdIndicates the src Xconnect Id which cause congestionro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.24 |
trapNode2IdIndicates the dest Xconnect Id which cause congestionro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.25 |
trapRoutenameindicate the xoute name that is not found between the xlinkro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.7.1.26 |
trapMeasFileNameindicate the Measurement file name. Can be any combination of
alphanumeric characters. Spaces are allowed and cannot
exceed 64 characters.ro DisplayString .1.3.6.1.4.1.4618.1.2.7.1.27 |
trapDirectoryindicate the Cdr File Directoryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.7.1.28 |
trapProcessorIdIndicates the Process Idro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.29 |
trapLogFileNameIndicate the Log file name. Can be any combination of
alphanumeric characters. Spaces are allowed and cannot
exceed 64 characters.ro DisplayString .1.3.6.1.4.1.4618.1.2.7.1.30 |
trapLogErrcauseIndicate the Log error operation causero DisplayString .1.3.6.1.4.1.4618.1.2.7.1.31 |
trapLogErrNoIndicate the log cdr error number of the operationro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.32 |
trapPsuNoIndicate the Power supply numberro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.33 |
trapIntIdIndicate the Power supply numberro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.34 |
trapIntfcIdIndicate the Power supply numberro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.35 |
trapLanIdIndicate theLan IDro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.36 |
trapnumXlinksIndicate the no of existing linksro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.37 |
trapSwitchId1Indicate the xconnect Idro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.38 |
trapSwitchId2Indicate the xconnect Idro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.39 |
trapProcInstNoIndicate the Process instance numberro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.40 |
trapProcNameIndicate the Process name that Failedro DisplayString .1.3.6.1.4.1.4618.1.2.7.1.41 |
trapFanNoIndicate the Fan Numberro INTEGER .1.3.6.1.4.1.4618.1.2.7.1.42 |
trapUserNameindicates the user login Namero NameString .1.3.6.1.4.1.4618.1.2.7.1.43 |
trapBitMapStatusIndicates the Bit Map Status of the Cics that are blocked. This Status is only valid for GROUPBLOCKING (I.e range >1)ro DisplayString .1.3.6.1.4.1.4618.1.2.7.1.44 |
alarmGrp OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.7.2 |
alarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4618.1.2.7.2.1 |
genswitchSnmpAgentReadyNotifyInfo : SNMP Agent is up TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.1 |
genConsoleLoginNotifyInfo : A user has successfully logged in from console TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.2 |
genConsoleLogoutNotifyInfo : A user has successfully logged out from console TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.3 |
genProcessBufOverflowNotifyInfo : Process ran out of buffer TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.4 |
genProcessBufOverflowRecoverNotifyInfo : Process Recovered from Buffer Overflow TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.5 |
genProcessHeapOverFlowNotifyInfo : Process Heap OverFlow Detected TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.6 |
genProcessHeapOverFlowRecoverNotifyInfo : Recovered from Process Heap Overflow TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.7 |
xconnectUpNotifyInfo : switch has successfully brought up TCP/IP link between MSCG and AC 120 xconnect TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.8 |
xconnectDnNotifyInfo : switch has a failure on TCP/IP link between MSCG and AC120 TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.9 |
xconnectClkClearNotifyInfo : Stratum Card is available TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.10 |
xconnectClkFailNotifyInfo : Stratum Card has either been removed or has failed TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.11 |
xconnectBkplaneRefClkClearNotifyInfo : Back Plane reference clock clear TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.12 |
xconnectBkplaneRefClkFailNotifyInfo : Back Plane reference clock fail TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.13 |
xconnectInterfaceInServiceNotifyInfo : Switch has successfully brought the specified interface to be in service TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.14 |
xconnectInterfaceOutOfServiceNotifyInfo : An interface card is out of service TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.15 |
xconnectCardInsertionNotifyInfo : A card is inserted in xconnect TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.16 |
xconnectCardRemovalNotifyInfo : A card is removed from xconnect TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.17 |
xconnectIllegalCardTypeNotifyInfo : Illegal Card Type TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.18 |
xconnectIntfFarEndLOFNotifyInfo : Interface Far end LOF TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.19 |
xconnectIntfFarEndAISNotifyInfo : Interface Far end AIS TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.20 |
xconnectIntfNearEndLOFNotifyInfo : Interface Near end LOF TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.21 |
xconnectIntfNearEndLOSNotifyInfo : Interface Near end LOS TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.22 |
xconnectIntfCreateNotifyInfo : Interface in AC120 has been created TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.23 |
xconnectIntfDeleteNotifyInfo : Interface in AC120 has been deleted TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.24 |
xconnectXlinkAdjConClrNotifyInfo : Xconnect Adjacent Congestion cleared TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.25 |
xconnectXlinkAdjConNotifyInfo : Xconnect Adjacent Congestion Notified TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.26 |
xconnectXlinkRouteFailNotifyInfo : Xpath not found between the Xlink TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.27 |
xconnectPortUpNotifyInfo : Port is Up TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.28 |
xconnectCPUSwitchOverNotifyInfo : XConnect CPU SwitchOver TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.29 |
atmRAINotifyInfo : ATM Remote Alarm Indication TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.30 |
atmAISNotifyInfo : ATM AIS TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.31 |
atmLOFNotifyInfo : ATM LOF TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.32 |
atmLOSNotifyInfo : ATM LOS TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.33 |
mfdClearNotifyInfo : A potential fault modem is cleared TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.34 |
mfdDetectionNotifyInfo : Faulty Modem: A Potential Faulty Modem has been Detected TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.35 |
measFileReadyNotifyInfo : Measurement file is ready for FTP TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.36 |
measDiskOverCrtclThresholdNotifyInfo : The partition that the measurement file resides on is over critical threshold. TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.37 |
measFileMoveNotifyInfo : Measurement file moved to secondary directory TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.38 |
measFileMoveErrNotifyInfo : Error in moving Measurement file to secondary directory TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.39 |
measFileOpenErrNotifyInfo : Measurement open file error TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.40 |
measFileDeleteNotifyInfo : Measurement file deleted TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.41 |
measFileDeleteErrNotifyInfo : Measurement delete file error TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.42 |
cdrFileReadyNotifyInfo :Cdr file is ready for Polling TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.43 |
cdrDiskFullNotifyInfo :CDR file disk usage reach critical threshold TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.44 |
cdrFileOpenErrNotifyInfo :CDR open file error TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.45 |
cdrFileMoveErrNotifyInfo : Error in moving CDR file from temp location to target CDR file location TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.46 |
cdrDeleteErrNotifyInfo : CDR file cannot be deleted TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.47 |
cdrWriteHeaderErrNotifyInfo :Error in writing CDR file header TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.48 |
cdrWriteRecErrNotifyInfo :Error in writing CDR record TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.49 |
cdrErrFileLocErrNotifyInfo: Invalid Cdr Directory TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.50 |
cdrErrTempFileLocErrNotifyInfo: Invalid Cdr Directory TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.51 |
cdrFileSysErrNotifyInfo: Cdr File System Operation error. TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.52 |
cdrFileCloseErrNotifyInfo: Error in closing CDR file TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.53 |
cdrFileDelete5DaysNotifyInfo: cdr files created within past 5 days are deleted TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.54 |
ss7LinkUpNotifyInfo : switch has successfully brought up ss7 mtp3 link TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.55 |
ss7LinkDnNotifyInfo : switch has a failure on ss7 mtp3 link TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.56 |
ss7Mtp2LinkUpNotifyInfo : switch has successfully brought up ss7 mtp2 link TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.57 |
ss7Mtp2LinkDnNotifyInfo : switch has a failure on ss7 mtp2 link TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.58 |
ss7LinkEnterCongestionNotifyInfo : the specified link has entered a congestion situation TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.59 |
ss7LinkExitCongestionNotifyInfo : the ss7 link has exited the congestion situation TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.60 |
ss7InvalidSLCNotifyInfo : Mtp3 invalid SLC configured. TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.61 |
ss7ConcernedDpcPauseNotifyInfo : Concerned DPC pause TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.62 |
ss7ConcernedDpcResumeNotifyInfo : Concerned DPC resume TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.63 |
ss7ConcernedDpcRemUnAvailNotifyInfo : Concerned DPC remote user unavailable TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.64 |
ss7LinkRemInhNotifyInfo : Link Inhibited Remotely TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.65 |
ss7LinkRemUnInhNotifyInfo : Link UnInhibited Remotely TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.66 |
ss7LinkLocInhNotifyInfo : Link Inhibited Locally TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.67 |
ss7LinkLocUnInhNotifyInfo : Link UnInhibited Locally TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.68 |
ss7LinkLOPBlkNotifyInfo : Local Processor Recovered causing link unblocked TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.69 |
ss7LinkLPRNotifyInfo : Local Processor Recovered causing link unblocked TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.70 |
ss7LinkRPONotifyInfo :LSSU/SIPO Received TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.71 |
ss7LinkRPRNotifyInfo :LSSU/SIPO stopped and FISU/MSU recived TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.72 |
ss7IsupCicLocNotifyInfo : ISUP Circuits are blocked/unblocked locally TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.73 |
ss7IsupCicRemNotifyInfo : ISUP Circuits are blocked/unblocked remotely TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.74 |
ss7IsupCongLvl1NotifyInfo : Route to DPC is encountering Level 1 Congestion TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.75 |
ss7IsupCongLvl2NotifyInfo : Route to DPC is encountering Level 2 Congestion TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.76 |
isdnDChnlUpNotifyInfo : An ISDN D-channel is Up TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.77 |
isdnDChnlDnNotifyInfo : An ISDN D-channel is down TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.78 |
logFileReadyNotifyInfo : Logger file is ready TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.79 |
logDiskFull60PercentNotifyInfo : Log Files occupy 60% of disk quota TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.80 |
logDiskFull70PercentNotifyInfo : Log Files occupy 70% of disk quota TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.81 |
logDiskFull80PercentNotifyInfo : Log Files occupy 80% of disk quota TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.82 |
logErrFileOpenNotifyInfo : Log file open error TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.83 |
logErrFileCloseNotifyInfo : Log file close error TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.84 |
logErrFileDeleteNotifyInfo : Log file cannot be deleted TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.85 |
logErrFileWriteNotifyInfo : Log manager cannot write to log file TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.86 |
msscPriDedicatedLinkUpNotifyInfo : Dedicated link between the 2 Netra machine is UP TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.87 |
msscPriDedicatedLinkDownNotifyInfo : Dedicated link between the 2 Netra machine is down TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.88 |
msscSecDedicatedLinkUpNotifyInfo : Dedicated link between the 2 Netra machine is UP TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.89 |
msscSecDedicatedLinkDownNotifyInfo :Dedicated link between the 2 Netra machine is down TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.90 |
msscPriPsuUpNotifyInfo : Primary hosts power supply up TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.91 |
msscPriPsuDownNotifyInfo : Primary hosts power supply down TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.92 |
msscBakPsuUpNotifyInfo : Backup hosts power supply up TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.93 |
msscBakPsuDownNotifyInfo : Backup hosts power supply down TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.94 |
msscPriLanPhyIntfUpNotifyInfo : Primary Physical LAN Interface Up TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.95 |
msscPriLanPhyIntfDownNotifyInfo : Primary Physical LAN Interface Down TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.96 |
msscSecLanPhyIntfUpNotifyInfo : Secondary physical LAN Interface Up TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.97 |
msscSecLanPhyIntfDownNotifyInfo : Secondary Physical LAN Interface Down TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.98 |
msscPriHostFanUpNotifyInfo : Primary Fan Up TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.99 |
msscPriHostFanDownNotifyInfo : Primary Fan Down TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.100 |
msscBckHostFanUpNotifyInfo : Backup Fan Up TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.101 |
msscBckHostFanDownNotifyInfo : Backup Fan Down TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.102 |
hubPriIntfUpNotifyInfo : Primary Interface Up TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.103 |
hubPriIntfDownNotifyInfo : Primary Interface down TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.104 |
hubSecIntfUpNotifyInfo : Secondary Interface Up TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.105 |
hubSecIntfDownNotifyInfo : Secondary Interface Down TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.106 |
ftProcessAbnormalTerminationNotifyInfo : Process abnormal termination TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.107 |
ftProcessRestartConfigSucceededNotifyInfo : Process abnormal termination TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.108 |
ftProcessRestartConfigFailedNotifyInfo : Process abnormal termination TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.109 |
ftMsscFtmupNotifyInfo : Process abnormal termination TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.110 |
ftControlSwitchOverSucceededNotifyInfo : Control SwitchOver Successful TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.111 |
ftControlSwitchOverFailedNotifyInfo : Control SwitchOver Failure TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.112 |
ftForcedSwitchOverSucceededNotifyInfo : Forced SwitchOver Successful TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.113 |
ftForcedSwitchOverFailedNotifyInfo : Forced SwitchOver Failure TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.114 |
ftProcessRestartDisableNotify TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.115 |
updateDBAuditOpStatNotifyInfo : Updated the Database for Audited Related Operational Status TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.116 |
isupIccAuditNotifyISUP ICC Audit Notify TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.117 |
cdrDiskFullMinorNotifyCDR Disk Usage reached Minor Threshold TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.118 |
cdrDiskFullMajorNotifyCDR Disk Usage reached Major Threshold TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.119 |
cdrErrMoveCdrNackNotifyInvalid CDR file Non-Ack Directory TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.120 |
cdrFileMoveCdrNackNotifyCDR file moved to Non-Ack Directory TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.121 |
ss7CktValidationNotifyValidation of Circuits TRAP-TYPE .1.3.6.1.4.1.4618.1.2.7.2.1.0.122 |
switchActiveAlarmTable SEQUENCE OF SwitchActiveAlarmEntry .1.3.6.1.4.1.4618.1.2.7.2.2 |
switchActiveAlarmEntry SwitchActiveAlarmEntry .1.3.6.1.4.1.4618.1.2.7.2.2.1 |
switchAlarmMsgIdAlarm Message Id. Can be any integer from 1-65535.ro INTEGER .1.3.6.1.4.1.4618.1.2.7.2.2.1.1 |
switchAlarmInstNoInstance number related to alarm. Can be any integer from 1-65535.ro INTEGER .1.3.6.1.4.1.4618.1.2.7.2.2.1.2 |
switchAlarmTimeDate and time when the alarma was generatedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.7.2.2.1.3 |
switchAlarmTypeThis specifies the event group is alarm. Default :ALARMro EventType .1.3.6.1.4.1.4618.1.2.7.2.2.1.4 |
switchAlarmMainEventThis specifies the main event event group of alarmro AlarmEvent .1.3.6.1.4.1.4618.1.2.7.2.2.1.5 |
switchAlarmSubEventThis specifies the main event event group of alarmro AlarmSubEvent .1.3.6.1.4.1.4618.1.2.7.2.2.1.6 |
switchAlarmIdThis specifies the alarm that was sentro INTEGER .1.3.6.1.4.1.4618.1.2.7.2.2.1.7 |
switchAlarmSeverityThis field defines the severity of alarms of alarm.
Alarms can od : Major,Minor,Critical and Informationalro AlarmSeverity .1.3.6.1.4.1.4618.1.2.7.2.2.1.8 |
switchAlarmDescThis description related to Generated alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4618.1.2.7.2.2.1.9 |
switchAlarmAckThis field is to acknowelge the alarms manuallyrw ActiveAlarmAckStatus .1.3.6.1.4.1.4618.1.2.7.2.2.1.10 |
switchAlarmRepeatTimeAlarm Repeat Time in minutes: After the set time all alarms
in the active alarm table will be displayed to the user againrw INTEGER .1.3.6.1.4.1.4618.1.2.7.2.2.1.11 |
services OBJECT IDENTIFIER .1.3.6.1.4.1.4618.2 |