AT-GS950-8-MIB
AI MIB Summary
The AT-GS950-8-MIB provides vendor-specific SNMP access for monitoring and configuring the AT-GS950 series Layer 2/3 Ethernet switches, exposing proprietary metrics for port status, traffic counters, and device health parameters not covered by standard MIBs.
Private MIB for AT-GS950 Series Switches
Main OID:
at-GS9508v2.1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165
1128
Objects
Active
Status
14
Dependencies
Imported Objects
Objects
1128 total| Object Name |
|---|
at-GS9508v2Private MIB for AT-GS950 Series Switches MODULE-IDENTITY .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165 |
SNMPv2-CONFPrivate MIB for AT-GS950 Series Switches Unknown .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165 |
SNMPv2-SMIPrivate MIB for AT-GS950 Series Switches NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165 |
l2Snmp OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1 |
sysSnmpUser OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.1 |
sysSnmpUserTable SEQUENCE OF TabSnmpUserEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.1.1 |
sysSnmpUserEntry TabSnmpUserEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.1.1.1 |
sysSnmpUserNameA human readable string rsysresenting the name of
the user.
This is the (User-based Security) Model dependent
security ID. SnmpAdminString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.1.1.1.1 |
sysSnmpUserAuthProtocolAn indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be authenticated, and if so,
the type of authentication protocol which is used.
An instance of this object is created concurrently
with the creation of any other object instance for
the same user (i.e., as part of the processing of
the set operation which creates the first object
instance in the same concsystual row).
If an initial set operation (i.e. at row creation time)
tries to set a value for an unknown or unsupported
protocol, then a 'wrongValue' error must be returned.
The value will be overwritten/set when a set operation
is performed on the corresponding instance of
UserCloneFrom.
Once instantiated, the value of such an instance of
this object can only be changed via a set operation to
the value of the NoAuthProtocol.
If a set operation tries to change the value of an
existing instance of this object to any value other
than NoAuthProtocol, then an 'inconsistentValue'
error must be returned.
If a set operation tries to set the value to the
NoAuthProtocol while the UserPrivProtocol value
in the same row is not equal to NoPrivProtocol,
then an 'inconsistentValue' error must be returned.
That means that an SNMP command generator application
must first ensure that the UserPrivProtocol is set
to the NoPrivProtocol value before it can set
the UserAuthProtocol value to NoAuthProtocol.rw AutonomousType (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.1.1.1.2 |
sysSnmpUserPrivProtocolAn indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be protected from disclosure,
and if so, the type of privacy protocol which is used.
An instance of this object is created concurrently
with the creation of any other object instance for
the same user (i.e., as part of the processing of
the set operation which creates the first object
instance in the same concsystual row).
If an initial set operation (i.e. at row creation time)
tries to set a value for an unknown or unsupported
protocol, then a 'wrongValue' error must be returned.
The value will be overwritten/set when a set operation
is performed on the corresponding instance of
usmUserCloneFrom.
Once instantiated, the value of such an instance of
this object can only be changed via a set operation to
the value of the NoPrivProtocol.
If a set operation tries to change the value of an
existing instance of this object to any value other
than NoPrivProtocol, then an 'inconsistentValue'
error must be returned.
Note that if any privacy protocol is used, then you
must also use an authentication protocol. In other
words, if usmUserPrivProtocol is set to anything else
than NoPrivProtocol, then the corresponding instance
of usmUserAuthProtocol cannot have a value of
usmNoAuthProtocol. If it does, then an
'inconsistentValue' error must be returned.rw AutonomousType (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.1.1.1.3 |
sysSnmpUserStatusThe status of this concsystual row.
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the usmUserStatus column
is 'notReady'.
In particular, a newly created row for a user who
employs authentication, cannot be made active until the
corresponding usmUserCloneFrom and usmUserAuthKeyChange
have been set.
Further, a newly created row for a user who also
employs privacy, cannot be made active until the
usmUserPrivKeyChange has been set.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this concsystual row can be modified,
excsyst for usmUserOwnAuthKeyChange and
usmUserOwnPrivKeyChange. For these 2 objects, the
value of usmUserStatus MUST be active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.1.1.1.4 |
sysSnmpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.2 |
sysSnmpGroupTable SEQUENCE OF TabSnmpGroupEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.2.1 |
sysSnmpGroupEntry TabSnmpGroupEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.2.1.1 |
sysSnmpSecurityModelA human readable string rsysresenting the name of
the user.
This is the (User-based Security) Model dsysendent
security ID. SnmpSecurityModel (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.2.1.1.1 |
sysSnmpSecurityNameA human readable string rsysresenting the name of
the user.
This is the (User-based Security) Model dsysendent
security ID. SnmpAdminString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.2.1.1.2 |
sysSnmpGroupNameThe name of the group to which this entry (e.g., the
combination of securityModel and securityName)
belongs.
This groupName is used as index into the
vacmAccessTable to select an access control policy.
However, a value in this table does not imply that an
instance with the value exists in table vacmAccesTable.rw SnmpAdminString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.2.1.1.3 |
sysSnmpGroupStatusThe status of this concsystual row.
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the usmUserStatus column
is 'notReady'.
In particular, a newly created row for a user who
employs authentication, cannot be made active until the
corresponding usmUserCloneFrom and usmUserAuthKeyChange
have been set.
Further, a newly created row for a user who also
employs privacy, cannot be made active until the
usmUserPrivKeyChange has been set.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this concsystual row can be modified,
excsyst for usmUserOwnAuthKeyChange and
usmUserOwnPrivKeyChange. For these 2 objects, the
value of usmUserStatus MUST be active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.2.1.1.4 |
sysSnmpGroupAccess OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.3 |
sysSnmpGroupAccessTable SEQUENCE OF TabSnmpGroupAccessEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.3.1 |
sysSnmpGroupAccessEntry TabSnmpGroupAccessEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.3.1.1 |
sysSnmpaccessGroupIndexThe name of the group to which this entry (e.g., the
combination of securityModel and securityName)
belongs.
This groupName is used as index into the
vacmAccessTable to select an access control policy.
However, a value in this table does not imply that an
instance with the value exists in table vacmAccesTable. SnmpAdminString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.3.1.1.1 |
sysSnmpaccessSecurityModelIn order to gain the access rights allowed by this
concsystual row, this securityModel must be in use. SnmpSecurityModel (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.3.1.1.2 |
sysSnmpaccessSecurityLevelThe minimum level of security required in order to
gain the access rights allowed by this concsystual
row. A securityLevel of noAuthNoPriv is less than
authNoPriv which in turn is less than authPriv.
If multiple entries are equally indexed excsyst for
this vacmAccessSecurityLevel index, then the entry
which has the highest value for
vacmAccessSecurityLevel is selected. SnmpSecurityLevel (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.3.1.1.3 |
sysSnmpaccessReadViewNameThe value of an instance of this object identifies
the MIB view of the SNMP context to which this
concsystual row authorizes read access.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.rw SnmpAdminString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.3.1.1.4 |
sysSnmpaccessWriteViewNameThe value of an instance of this object identifies
the MIB view of the SNMP context to which this
concsystual row authorizes write access.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.rw SnmpAdminString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.3.1.1.5 |
sysSnmpaccessNotifyViewNameThe value of an instance of this object identifies
the MIB view of the SNMP context to which this
concsystual row authorizes access for notifications.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.rw SnmpAdminString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.3.1.1.6 |
sysSnmpaccessStatusThe status of this concsystual row.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this concsystual row can be modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.3.1.1.7 |
sysSnmpViewTree OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.4 |
sysSnmpViewTreeTable SEQUENCE OF TabSnmpViewTreeEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.4.1 |
sysSnmpViewTreeEntry TabSnmpViewTreeEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.4.1.1 |
sysSnmpviewTreeNameThe human readable name for a family of view subtrees. SnmpAdminString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.4.1.1.1 |
sysSnmpviewTreeSubtreeThe MIB subtree which when combined with the
corresponding instance of vacmViewTreeFamilyMask
defines a family of view subtrees. OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.4.1.1.2 |
sysSnmpviewTreeMaskThe bit mask which, in combination with the
corresponding instance of vacmViewTreeFamilySubtree,
defines a family of view subtrees.
Each bit of this bit mask corresponds to a
sub-identifier of vacmViewTreeFamilySubtree, with the
most significant bit of the i-th octet of this octet
string value (extended if necessary, see below)
corresponding to the (8*i - 7)-th sub-identifier, and
the least significant bit of the i-th octet of this
octet string corresponding to the (8*i)-th
sub-identifier, where i is in the range 1 through 16.
Each bit of this bit mask specifies whether or not
the corresponding sub-identifiers must match when
determining if an OBJECT IDENTIFIER is in this
family of view subtrees; a '1' indicates that an
exact match must occur; a '0' indicates 'wild card',
i.e., any sub-identifier value matches.
Thus, the OBJECT IDENTIFIER X of an object instance
is contained in a family of view subtrees if, for
each sub-identifier of the value of
vacmViewTreeFamilySubtree, either:
the i-th bit of vacmViewTreeFamilyMask is 0, or
the i-th sub-identifier of X is equal to the i-th
sub-identifier of the value of
vacmViewTreeFamilySubtree.
If the value of this bit mask is M bits long and
there are more than M sub-identifiers in the
corresponding instance of vacmViewTreeFamilySubtree,
then the bit mask is extended with 1's to be the
required length.
Note that when the value of this object is the
zero-length string, this extension rule results in
a mask of all-1's being used (i.e., no 'wild card'),
and the family of view subtrees is the one view
subtree uniquely identified by the corresponding
instance of vacmViewTreeFamilySubtree.
Note that masks of length greater than zero length
do not need to be supported. In this case this
object is made read-only.rw OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.4.1.1.3 |
sysSnmpviewTreeTypeIndicates whether the corresponding instances of
vacmViewTreeFamilySubtree and vacmViewTreeFamilyMask
define a family of view subtrees which is included in
or excluded from the MIB view.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.4.1.1.4 |
sysSnmpviewTreeStatusThe status of this concsystual row.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this concsystual row can be modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.4.1.1.5 |
sysSnmpCommunity OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.5 |
sysSnmpCommunityTable SEQUENCE OF TabSnmpCommunityEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.5.1 |
sysSnmpCommunityEntry TabSnmpCommunityEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.5.1.1 |
sysSnmpsnmpCommunityIndexThe unique index value of a row in this table. SnmpAdminString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.5.1.1.1 |
sysSnmpsnmpCommunityNameThe unique index value of a row in this table.rw SnmpAdminString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.5.1.1.2 |
sysSnmpsnmpCommunityPolicyA human readable string rsysresenting the corresponding
value of snmpCommunityName in a Security Model
indsysendent format.rw SnmpAdminString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.5.1.1.3 |
sysSnmpsnmpCommunityStatusThe status of this concsystual row in the
snmpCommunityTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The snmpCommunityName and
snmpCommunitySecurityName objects must be explicitly set.
There is no restriction on setting columns in this table
when the value of snmpCommunityStatus is active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.5.1.1.4 |
sysSnmpTrapManager OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.6 |
sysSnmpTrapManagerTable SEQUENCE OF TabSnmpTrapManagerEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.6.1 |
sysSnmpTrapManagerEntry TabSnmpTrapManagerEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.6.1.1 |
sysSnmpsnmpTrapManagerNameThe locally arbitrary, but unique identifier associated
with this snmpNotifyEntry. SnmpAdminString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.6.1.1.1 |
sysSnmpsnmpTrapManagerAddressThis object contains a transport address. The format of
this address dsysends on the value of the
snmpTargetAddrTDomain object.rw TAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.6.1.1.2 |
sysSnmpsnmpTrapManagerSecurityLevelThe Level of Security to be used when generating
SNMP messages using this entry.rw L2snmpLevel .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.6.1.1.3 |
sysSnmpsnmpTrapManagerStatusThe status of this concsystual row in the
SnmpTrapManagerTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The snmpTrapManagerName,
snmpTrapManagerAddress and snmpTrapManagerSecurityLevel
objects must be explicitly set.
There is no restriction on setting columns in this table
when the value of snmpTrapManagerStatus is active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.6.1.1.4 |
sysSnmpEngineIDAn SNMP engine's administratively-unique identifier.
In a simple agent, this value is always that agent's
own snmpEngineID value.
The value can also take the value of the snmpEngineID
of a remote SNMP engine with which this user can
communicate.rw SnmpEngineID (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.7 |
snmpGlobalStateThis object is for enabling or disabling SNMP Community function.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.1.8 |
l2Radius OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.25 |
sysRadiusExtClient OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.25.1 |
sysRadiusExtServerTableThe (concsystual) table listing the RADIUS servers with
which the client shares a secret. SEQUENCE OF TabRadiusExtServerEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.25.1.3 |
sysRadiusExtServerEntryAn entry (concsystual row) rsysresenting a RADIUS server
with which the client shares a secret. TabRadiusExtServerEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.25.1.3.1 |
sysRadiusExtServerIndexThe RADIUS server with whom the client interacts.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.25.1.3.1.1 |
sysRadiusExtServerAddressThe IP address of the RADIUS server
referred to in this table entry.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.25.1.3.1.2 |
sysRadiusExtServerSharedSecretThe secret string which is shared between Server and Clientrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.25.1.3.1.4 |
sysRadiusExtServerResponseTimeThe maximum time within which the server has to respond for a
request from the clientrw INTEGER (1 ..120) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.25.1.3.1.6 |
sysRadiusExtServerMaximumRetransmissionThe allowed maximum no. of trials to be tried by a client to get
response from the server for a requestrw INTEGER (1 ..254) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.25.1.3.1.7 |
sysRadiusExtServerAuthPortNumThe UDP port the client is using to send authentication
requests to this server.rw INTEGER (1 ..65535) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.25.1.3.1.8 |
sysRadiusExtServerEntryStatusThis object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.25.1.3.1.9 |
sysRadiusExtServerAccPortThe UDP port the client is using to send accounting
requests to this server.rw INTEGER (1 ..65535) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.25.1.3.1.10 |
l2Cfa OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27 |
if OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1 |
ifMaxInterfacesSpecifies the maximum number of interfaces that can
be present in the system.rwdeprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.1 |
ifMaxPhysInterfacesSpecifies the maximum number of physical interfaces
that can be present in the system.rwdeprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.2 |
ifAvailableIndexShows an ifIndex which is available for creation of
any new virtual (non-physical) interface in the system.
This ifIndex value can be used for creation of interfaces
in the ifMainTable or any media-specif MIB. For creation
of physical interfaces, any free ifIndex between 1 and
ifMaxPhysInterfaces can be used.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.3 |
ifMainTableA list of all the interface entries in the system.
This table contains objects which are applicable to all
types of interfaces in the system. This table is a
proprietary extension to the standard ifTable and
ifXTable. The index to this table has the semantics of
the MIB-2 ifIndex. SEQUENCE OF TabIfMainEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.4 |
ifMainEntryAn entry containing management information applicable
to a particular interface. TabIfMainEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.4.1 |
ifMainIndexA unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.4.1.1 |
ifMainTypeThe type/protocol of interface. Specification of
the object is mandatory for all interfaces. This
value should be specified after the row creation
in the ifMainTable and before setting any other
object in this table. Once the type is specified,
it cannot be changed - the interface should be
deleted for changing the type of the interface.
The ethernetCsmacd(6), iso88025TokenRing(9), aal5(49),
async(84) and hdlc(118) are physical interfaces while
all other types are virtual or logical interfaces.
For creation of physical interface types, it is mandatory to
specify the handle to the device driver using the ifAlias
object of the standard ifXTable before specifying the type.
This handle could be something like eth1 or /dev/abcd.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.4.1.2 |
ifMainMtuThe MTU for the interface as shown to the higher
interface sub-layer (this value should not include
the encapsulation or header added by the interface).
If IP is operating over the interface, then this
value indicates the IP MTU over this interface.
For changing the MTU of any interface, the interface
must be brought down first - changing MTU while the
interface is administratively up is not permitted.
If not specified during interface creation, a default
value is assigned based on the ifMainType given to
the particular interface.
While configuring for logical VLAN interfaces, care
should be taken to, configure this value as the
lowest of the MTU values of the member ports.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.4.1.3 |
ifMainAdminStatusThe desired state of the interface. This object
can be set only when the ifMainRowStatus of the
interface is active. This object has the semantics
of the ifAdminStatus of the standard ifTable.
The testing(3) state indicates that no operational
packets can be passed - this state is not currently
supported.
When a managed system initializes, all
interfaces start with ifMainAdminStatus in the
down(2) state, it's a default state also. As a result
of either explicit management action or per
configuration information retained by the managed
system, ifMainAdminStatus is then changed to
the up (1) state (or remains in the
down(2) state).rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.4.1.4 |
ifMainOperStatusThe current operational state of the interface.
The testing (3) state indicates that no operational
packets can be passed - this state is not supported
currently.
If ifMainAdminStatus is down (2)
then ifMainOperStatus would be down (2). If
ifMainAdminStatus is changed to up (1) then
ifMainOperStatus should change to up (1) if the
interface is ready to transmit and receive
work traffic; it should change to dormant (5)
the interface is waiting for external actions
(such as a serial line waiting for an incoming
connection); it should change to lowerLayerDown(7)
state if it cannot be made up as the interface sub-layer
below it is down; it should remain in the down (2) state
if and only if there is a fault that prevents it
from going to the up (1) state; it should remain in
the notPresent (6) state if the interface has
missing (typically, hardware) components.
The status unknown(4) is shown when it is not possible
to determine the exact status of the interface - e.g.
the interface sub-layer is performing negotiations -
during this period the interface is not up but at the
same time, it is not a fault condition and hence it
cannot be shown as down - in such periods the status
is shown as unknown.
This object has the semantics of the ifOperStatus of the
standard ifTable.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.4.1.5 |
ifMainEncapTypeThe encapsulation type to be used over the interface.
For Ethernet interfaces, the default encapsulation
type is ethernetV2(8). The other possible encapsulation
is llcSnap(6). If other(1) is specified then an
automatic encapsulation type learning method is used
in ARP for determining the encapsulation for unicast
destinations while the multicast and broadcast destinations
use ethernetV2(8).
For PPP and MLPPP interfaces, the encapsulation type can
only be other(1) and this is the default value.
For FR VCs, the value can be nlpid(2) (for carrying protocols
which have NLPID) or nlpidSnap(3) (for other protocols). The
default is nlpid(2) and the types of protocols supported are
inferred from the stack-layering implemented over the
interface.
For X.25 VCs, the value can be nlpid(2) or nlpidSnap(3)
(where the VC can carry multiplexed protocol traffic with
each data packet containing the NLPID or SNAP header) or
cudNlpid(4) or cudNlpidSnap(5) (where the CUD specifies
the NLPID of the protocol or SNAP and the data packets do
not contain these headers - for dedicated VCs). The default
is cudNlpid(4).
For ATM VCs, the default is llcSnap(6) but the
vcMultiplexed(7) encapsulation is also supported.
This object is not applicable to other interfaces.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.4.1.6 |
ifMainBrgPortTypeThe Bridge port type of this specified externally accessible port.
Bridge Port type can be specified only for switch ports and not for
router ports.
providerNetworkPort - Port Connected to a single Provider.
SVLAN Classification is based on only the PVID configured for the
port for untagged packets.
customerNetworkPortPortBased - Port in the S-VLAN component that
can transmit or received frames for single customer.
All packets received on this port, are mapped to one single service
instance identified by the PVID of that Port.
Accsystable Port Type will be always Admit only Untagged or Priority
Tagged Frames on this port.
customerNetworkPortStagged - Port in the S-VLAN component that
can transmit or received frames for single customer.
VLAN classification on this interface will be based on the S-tag
received or on the PVID of the port. Ingress Filtering will be
always enabled on this port.
customerEdgePort - Port in a Provider Edge Bridge connected to a
single customer. Multiple services can be provide on this port.
The Packets received on this interface will be first classified
to a CVLAN. CVLAN classification can be based on the Vid
in the C-Tag present in the packet (if it C-tagged packet) or from
the pvid of the port. Service instance selection (S-VLAN selection)
for a frame is done based on the entry present in the C-VID
registration table for the pair (C-VID, recsystion Port).
CustomerEdgePort configuration is allowed only in Provider Edge
Bridges.
propCustomerEdgePort - Port connected to a single customer, where
multiple services can be provided based on only Proprietary SVLAN
classification tables. S-VLAN classification will not happen based on
C-VID registration table on this port. propCustomerEdgePort
configuration is allowed only in Provider Edge Bridges.
propCustomerNetworkPort - Port connected to a single customer, where
multiple service can be provided based on CVLANs by assigning one of
the Proprietary SVLAN classification tables to this port. The
services can also be assigned using other proprietary SVLAN
classification tables where CVLAN is not the index of the table.
propProviderNetworkPort - Port connected to a Q-in-Q Bridge located
inside Provider Network. This port is part of S-VLAN component.
If packets to be tagged and sent out of this port will have 0x8100
as the ether type. Similarly pakcets with standard Q tag (ether type
as 0x8100) received will be considered as S-Tagged packets.
customerBridgePort - Type of the port to be used in customer
bridges as well in Provider(Q-in-Q) bridges. This type is not valid
in Provider Core bridges as well as Provider Edge bridge.
In Customer bridges and in Provider Bridges only customerPort option
is allowed.
Bridge Port Type cannot be set for a port-channel port, if some
physical ports are aggregated in it.
Also Bridge Port type cannot be set for a port, if part of a
port-channel.
Whenever the Bridge port type changes, the previous configuration
associated with the port will be flushed.
For example.
whenever CNP(STagged) and PNP port types are changed to any
other port type,
- The unicast entries learnt on this port and
- The VID translation table entries associated with the port
will be flushed.
Whenever CEP port type is changed to any other port type,
- The unicast entries learnt on this port
- The C-VID registration table entries associated with the port
- The PEP configuration table entries
- The service priority regeneration table entries
will be flushed.
Even the vlan membership of the port will be removed when the
Pbport type is changed.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.4.1.7 |
ifMainRowStatusA RowStatus variable for addition, deletion and in-activation
of the interfaces. Specification of the object is mandatory
for all interfaces.
When the status is active, the interface is created and
ready to use in the respective protocol modules.
When the status is notInService, the interface has not been
registered with the respective protocol modules and as such
those modules are not aware of the existence of the interface
- creation is hence, incomplete. Setting an active interface
to notInService results in de-registration/deletion of the
interface from the respective protocol modules and all the
configurations associated with that interface in those modules
may be lost.
Deletion of an interface, may affect the status of other
interfaces which are layered above or below it in the Interface
Stack (ifStackTable) and may result in other interfaces being
made notReady or notInService.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.4.1.8 |
ifIpTableA list of all the interface entries in the system which
are registered with IP.
This table contains objects which are applicable for the
management of IP over the network interfaces
in the system.
This table is a extension to the ifMainTable.
The index to this table has the semantics of
the ifMainIndex of the ifMainTable.
Entries are created automatically in this table for
any interface sub-layer which is layer below IP using
the ifStackTable. Similarly, entries are deleted from
this table when the interface's layering below IP is
removed. SEQUENCE OF TabIfIpEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.5 |
ifIpEntryAn entry containing management information applicable
to a particular interface over which IP is operating. TabIfIpEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.5.1 |
ifIpAddrAllocMethodThe mechanism to be used for allocation of IP
address for this interface.
The value negotiation can be used only for PPP
and MLPPP interfaces which support obtaining of
IP addresses through negotiation.
The dynamic(3) option takes an IP
address dynamically from the available
server (dhcp/bootp/rarp) according to the
protocol specified in ifIpAddrAllocProtocol.
If the method specified is manual and the IP
address is not provided (then the interface
would be treated as a un-numbered interface.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.5.1.1 |
ifIpAddrSpecifies the IP address given to this
interface. The specification of this object is
mandatory for all network interfaces (Ethernet,
FR VC, IPoA interface, PPP link - not under MP,
MP interface and X.25 VC). If the interface is
not a network interface then the default value
of 0.0.0.0 is assigned and the interface is
treated as a un-numbered interface by IP.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.5.1.2 |
ifIpSubnetMaskSpecifies the IP Subnet Mask for this
interface. The value should be specified only
for network interfaces and any valid VLSM is
accsysted.
If not specified, this object takes the default
subnet mask value based on the class of the IP
address configured for the interface.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.5.1.3 |
ifIpBroadcastAddrSpecifies the IP broadcast address for this
interface. The value should be specified only
for network interfaces and any valid broadcast
address based on a valid VLSM is accsysted.
If not specified, this object takes the default
value based on the class of the IP
address configured for the interface.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.5.1.4 |
ifIpForwardingEnableSpecifies whether IP forwarding is enable on
this interface. Disabling IP forwarding on an
interface will result in packets which are to
be forwarded on that interface being dropped
and ICMP error messages being generated for the
packets.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.5.1.5 |
ifIpAddrAllocProtocolSpecifies the protocol to be used to obtain
IP address for this interface. This object is
valid only when ifIpAddrAllocMethod is set to
dynamic (3).
Currently rarp (1) option is not
supported. The assigned value will be effective
only when the interface admin status changesrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.5.1.6 |
ifIvrTableA list of all the interfaces in the system with IVR related
configurations.
This table is an extension to the ifMainTable. The index to
this table has the semantics of the ifMainIndex of the
ifMainTable. SEQUENCE OF TabIfIvrEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.8 |
ifIvrEntryAn entry containing IVR-related information applicable
to a interface. TabIfIvrEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.8.1 |
ifIvrBridgedIfaceIndicates if this interface is a Bridged interface
or not.
A value of 'TRUE' indicates that this interface is
a Bridged interface and is capable of performing
bridging of packets through this interface.
A value of 'FALSE' indicates that this
interface is a Routed interface and is capable of
performing routing of packets through this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.8.1.1 |
ifSetMgmtVlanListA string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanId values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanId value in that octet.
This is the set of vlans configured by management to associate
with the management interface.rw OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.9 |
ifResetMgmtVlanListA string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanId values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanId value in that octet.
This is the set of vlans configured by management to dis-associate
from the management interface.
Get operation is not allowed for this object.rw OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.10 |
ifSecondaryIpAddressTableA list of secondary IP addresses configured over the
interfaces registered with IP.
This table is a extension to the ifMainTable.
The index to this table has the semantics of
the ifMainIndex of the ifMainTable.
Secondary IpAddress configuration should not override the
primary ip address configured for any of the interface
Updation of entries in this table are not allowd when
RowStatus is active SEQUENCE OF TabIfSecondaryIpAddressEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.11 |
ifSecondaryIpAddressEntryAn entry contains the information associated with the
secondary(additional) ip address configured to a particular
interface. TabIfSecondaryIpAddressEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.11.1 |
ifSecondaryIpAddressSpecifies the Secondary IP address associated with the
interface IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.11.1.1 |
ifSecondaryIpSubnetMaskSpecifies the IP Subnet Mask associted with the
secondary ip address configuration. The value should be
specified only for network interfaces and any valid
VLSM is accsysted.
If not specified, this object takes the default
subnet mask value based on the class of the IP
address configured for the interface.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.11.1.2 |
ifSecondaryIpBroadcastAddrSpecifies the IP broadcast address associated with
the configured secondary IP address. The value should be
specified only for network interfaces and any valid
broadcast address based on a valid VLSM is accsysted.
If not specified, this object takes the default
value based on the class of the IP
address configured for the interface.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.11.1.3 |
ifSecondaryIpRowStatusThis object is used to manage creation and deletion of rows
in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.1.11.1.4 |
traps OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.27.4 |
l2Rmon OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.44 |
sysRmonEnableStatusThis object defines the sysRmonenable flag for sysRmonrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.44.2 |
sysRmonHwStatsSuppThis object defines the flag for whether HW supports
Etherstatistics or notrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.44.3 |
sysRmonHwHistorySuppThis object defines the enabled HWhistorysupp flag for sysRmonrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.44.4 |
sysRmonHwAlarmSuppThis object defines the enabled HWAlarmsupp flag for sysRmonrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.44.5 |
sysRmonHwEventSuppThis object defines the enabled HWEvent flag for sysRmonrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.44.9 |
l2La OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63 |
sysLaSystem OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.1 |
sysLaSystemControlStart or shutdown Link Aggregation Module in the system
When set as 'start',resources required by Link aggregation
module are allocated & Link aggregation module starts running.
When shutdown, all resources used by Link aggregation module
will be released to the systemrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.1.1 |
sysLaStatusSets the Link Aggregation Module administrative status as
enabled or disabled. The module can be enabled only when this
object is set to 'enabled'.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.1.2 |
sysLaTraceOptionThis object is used to enable Trace Statements in
Link Aggregation Module.
A FOUR BYTE integer is used for enabling the level of tracing.
Each BIT in the four byte integer, rsysresents a particular
level of Trace.
The mapping between the bit positions & the level of trace is
as follows:
0 - Init and Shutdown Traces
1 - Management Traces
2 - Data Path Traces
3 - Control Plane Traces
4 - Packet Dump Traces
5 - Traces related to All Resources excsyst Buffers
6 - All Failure Traces
7 - Buffer Traces
The remaining bits are unused. Combination of levels are
also allowed.
For example if the bits 0 and 1 are set, then the Trace
statements related to Init-Shutdown and management
will be printed.
The user has to enter the corresponding INTEGER VALUE for the
bits set. For example if bits 0 and 1 are set then user has to
set the value 3.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.1.3 |
sysLaMaxPortsPerPortChannelThis Object specifies the maximun number of
ports that can attach to a port-channelro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.1.4 |
sysLaMaxPortChannelsThis Object specifies the maximum number of
Port-channels Present in the systemro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.1.5 |
sysLaOperStatusThis read only objects gives actual status of the Link
Aggregation Module (Operational status of module). When
Module is enabled Link Aggregation protocol starts
functioning. When the module is disabled all the dynamically
allocated memory will be freed and Link Aggregation protocol
stops functioning.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.1.6 |
sysLaActorSystemIDA 6-octet read-write MAC address value used as a unique
identifier for the System.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.1.7 |
sysLaPortChannel OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.2 |
sysLaPortChannelTableA Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel SEQUENCE OF TabLaPortChannelEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.2.1 |
sysLaPortChannelEntryThere is one entry in this table for each created
port-channel port TabLaPortChannelEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.2.1.1 |
sysLaPortChannelIfIndexThe ifIndex of the port-channel(Aggregator's
interface index). InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.2.1.1.1 |
sysLaPortChannelGroupAn index that uniquely identifies an entry in this table.ro LacpKey .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.2.1.1.2 |
sysLaPortChannelAdminMacAddressThis object is used for configuring MacAddress that is
to be used by the port-channel when sysLaPortChannelMacSelection
is force.
WARNING:The value configured should not conflict
with the MAC address of system ports that are not configured
to select this port-channel.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.2.1.1.3 |
sysLaPortChannelMacSelectionIndicates the MAC address selection method for
for the port-channel.
Dynamic - Port-channel MAC address is chosen
as MAC address of an active port
in the PortChannel.
Force - Port-channel MAC address configured through
sysLaPortChannelAdminMacAddress is used.
The value can be changed to Force only after configuring
a valid MAC address in sysLaPortChannelAdminMacAddress.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.2.1.1.4 |
sysLaPortChannelModeCurrent Operating Channel Mode of the port
Lacp(1) - forcing the port to negotiate with the
partner.
manual(2) - force the port to enable channeling (Manual).
disable(3) - channeling is disabled.ro PortLaMode .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.2.1.1.5 |
sysLaPortChannelPortCountThe number of ports actually configured to the port-channelro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.2.1.1.6 |
sysLaPortChannelActivePortCountThis object will give the number of ports that are attached to the
port-channel and actively carrying data traffic on the link.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.2.1.1.7 |
sysLaPortChannelSelectionPolicyLink selection policy to be used by the port-channel. The
selection policies based on the IP address can be set if
and only if hardware is present and supported.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.2.1.1.8 |
sysLaPortChannelDefaultPortIndexThe ifIndex of the default port that gets attached to the
aggregator. A value of 0 means there is no default port for
this port-channel.
If this object is set to 0, it will remove the current default
port from the aggregator.
To change the default port of an aggregator, first reset the
object to 0 and then set the new ifIndex as default port.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.2.1.1.9 |
sysLaPort OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.3 |
sysLaPortTableA table that contains objects to set the port lacp mode
of dot3adAggPortTable. SEQUENCE OF TabLaPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.3.1 |
sysLaPortEntryEach entry in this table is for each physical port that participates
in Link Aggregation which can be either aggregatable or individual.
This table is indexed by the PortIndex. TabLaPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.3.1.1 |
sysLaPortIndexThe ifIndex of the port InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.3.1.1.1 |
sysLaPortModeThis object is used to enable LACP, disable LACP or manually
aggregate a portrw PortLaMode .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.3.1.1.2 |
sysLaPortBundleStateThis read-only object is used to display the port state in aggregation
upInBndl(0) - The port is operationally up and actively
takes part in aggregation.
standby(1) - The port is capable of joining in
aggregation group, when any of the ports in
aggregation group goes down.
down(2) - The port is operationally down in lower layers.
or the port is operational in lower layers
but temporarily not able to participate
in aggregation because of different partner
information in the same group.
upIndividual(3) - The port is operating individually and
is not taking part in aggregation.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.3.1.1.3 |
sysLaPortActorResetAdminStateA string of 8 bits,corresponding to the administrative values
of Actor_State as transmitted by the Actor in LACPDUs.
The first bit corresponds to bit 0 of Actor_State (LACP_Activity),
the second bit corresponds to bit 1 (LACP_Timeout),the third bit
corresponds to bit 2 (Aggregation),the fourth bit corresponds to
bit 3 (Synchronization),the fifth bit corresponds to bit 4
(Collecting),the sixth bit corresponds to bit 5 (Distributing),
the seventh bit corresponds to bit 6 (Defaulted),and the eighth
bit corresponds to bit 7 (Expired).
This object allows the RESET of the values of Actor LACP_Activity,
LACP_Timeout and Aggregation.
Get operation on this object returns the current Port State of
the Actorrw LacpState .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.3.1.1.4 |
sysLaPortAggregateWaitTimeDuration of the port to attach to the PortChannel.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.3.1.1.5 |
sysLaPortPartnerResetAdminStateA string of 8 bits,corresponding to the administrative values
of Partner_State.The first bit corresponds to bit 0 of Partner_State
(LACP_Activity),the second bit corresponds to bit 1 (LACP_Timeout),
the third bit corresponds to bit 2 (Aggregation),the fourth bit
corresponds to bit 3 (Synchronization),the fifth bit corresponds to
bit 4 (Collecting),the sixth bit corresponds to bit 5 (Distributing),
the seventh bit corresponds to bit 6 (Defaulted),and the eighth
bit corresponds to bit 7 (Expired).
This object allows the RESET of the values of Partner LACP_Activity,
LACP_Timeout and Aggregation.
Get operation on this object returns zeros for
the Partner administrative valuesrw LacpState .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.3.1.1.6 |
sysLaPortActorAdminPortThe port number used as dot3adAggPortActorPort and is
communicated in LACPDUs as the Actor_Port.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.3.1.1.7 |
sysLaPortRestoreMtuThe Restore mtu stores the original MTU of the port
before getting aggregated to port channel.
A SET on the MIB object is not allowed for SNMP users.
This operation is allowed only during config-save-restore
operation , during system initialization.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.3.1.1.8 |
sysLaPortSelectAggregatorThis read-only object is used to display whether the port participates
in dynamic aggregator selection. The default will be static aggregation
selection.
static(0) - The port is involved only in static aggregation.
i.e. the port can be a member of only the aggregation
to which it is configured.
dynamic(1) - The port participates in dynamic aggregation
selection. i.e. the port will be a part of best
aggregation selected based on System id and Admin key.
This object is set to 'dynamic' once the port is configured as a default
port of a port channel.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.63.3.1.1.9 |
l2Pnac OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64 |
sysPnacPaeSystem OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.1 |
sysPnacSystemControlStarts or shutdowns PNAC Module in the system.
When set as 'start',resources required by PNAC
module are allocated & PNAC module starts running.
When shutdown, all resources used by PNAC module
will be released to the system.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.1.1 |
sysPnacAuthenticServerThis object is used to configure for the choice of
local or remote Authentication Server to be used by
the Authenticator for its authentication services.rw AuthenticMethod .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.1.3 |
sysPnacNasIdThis object is the Network Access Server Identifier
to be presented before the remote Authentication
Server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.1.4 |
sysPnacPaePortTableA table of system level information for each port
supported by the EnterprisePNAC. An entry appears in this
table for each port of this system. This table is an
extension of dot1xPaePortTable of IEEE 802.1x MIB. SEQUENCE OF TabPnacPaePortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.1.5 |
sysPnacPaePortEntryConfiguration as port based or MAC based authentication
and Supplicant count on a port. Index to this table is
same as that of the dot1xPaePortTable, which is the
InterfaceIndex. TabPnacPaePortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.1.5.1 |
sysPnacPaePortNumberThe port number associated with this port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.1.5.1.1 |
sysPnacPaePortStatusThe value of the combined Port status.ro PaeControlledPortStatus .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.1.5.1.6 |
sysPnacPaeMultiAuthEnableThis object indicates dot1x multi hsot is enabled or disabled.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.1.5.1.7 |
sysPnacPaeProtocolModeThis object indicates mode is 802.1x or mac based.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.1.5.1.8 |
sysPnacPaePiggybackModeThis object indicates piggyback mode is enabled or disabled.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.1.5.1.9 |
sysPnacPaeVlanAssignmentThis object indicates vlan assignment is enabled or disabled.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.1.5.1.10 |
sysPnacPaeSecureVlanThis object indicates Secure vlan is enabled or disabled.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.1.5.1.11 |
sysPnacModuleOperStatusThis read only objects gives actual status of the PNAC Module
(Operational status of module). When Module is enabled
PNAC protocol starts functioning. When the module is disabled
all the dynamically allocated memory will be freed and PNAC
protocol stops functioning.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.1.6 |
sysPnacAuthServer OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.3 |
sysPnacASUserConfigTableThis table contains authentication related User
configuration information maintained by PNAC
local Authentication Server. SEQUENCE OF TabPnacASUserConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.3.1 |
sysPnacASUserConfigEntryEach entry contains User name, Password, Authentication
protocol used, Authenticated session timeout and Access
ports list of the User seeking authentication. TabPnacASUserConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.3.1.1 |
sysPnacASUserConfigUserNameIdentity of the User seeking authentication. A string
of not more than 20 printable characters. OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.3.1.1.1 |
sysPnacASUserConfigPasswordThe secret Password of the User. A string of not
more than 20 printable characters.
When read, this always returns a String
of length zero.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.3.1.1.2 |
sysPnacASUserConfigAuthProtocolThe Authentication protocol supported for the User.ro Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.3.1.1.3 |
sysPnacASUserConfigAuthTimeoutThe time in seconds after which the Authentication
offerred to the User ceases. Maximum value of the
object can be 7200 seconds. When the object value
is 0, the ReAuthPeriod of the Authenticator port is
used by Authenticator.rw Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.3.1.1.4 |
sysPnacASUserConfigPortListThe complete set of ports of Authenticator to
which the User is allowed or denied access, on the
basis of setting of 'sysPnacASUserConfigPermission'
object.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.3.1.1.5 |
sysPnacASUserConfigPermissionFor the set of ports indicated by
'sysPnacASUserConfigPortList' object, the User is
allowed access when this object is set 'allow' and
is denied access when this object is set 'deny'.rw PermissionType .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.3.1.1.6 |
sysPnacASUserConfigDynamicVlanIDDynamic Vlan ID is assigned by Switch in local moderw Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.3.1.1.7 |
sysPnacASUserConfigRowStatusThis object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.3.1.1.8 |
sysGuestVlan OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.4 |
sysPnacGuestVlanTableThis table contains authentication session information
associated with each Guest vlan while Authenticator
operates in port based authentication mode. SEQUENCE OF TabPnacGuestVlanEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.4.1 |
sysPnacGuestVlanEntryGuest Vlan ID assign with each port. TabPnacGuestVlanEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.4.1.1 |
sysPnacPaePortNoThe port number associated with this port.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.4.1.1.1 |
sysPnacGuestVlanIdspecify the guest vlan tag.0 for non exitingrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.64.4.1.1.2 |
l2System OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81 |
sysSystemInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1 |
sysSwitchNameSystem name used for identification of the device.
The following characters are allowed to input.
0 ~ 9 / a ~ z / A ~ Z
Special character: ( ) A!V + _ = .rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.1 |
sysHardwareVersionVersion number of the Hardware.ro DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.2 |
sysFirmwareVersionVersion number of the Firmware.ro DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.3 |
sysDefaultIpAddrCfgModeSpecifies the means by which the default interface in the device
gets the IP address.
If 'manual' mode is selected, the default interface takes the
'sysDefaultIpAddr' configured in the system.
If 'dynamic' mode is selected, the default interface gets the IP address
through dynamic IP address configuration protocols such as RARP client,
BootP client, DHCP Client, etc.
If the system fails to get the IP address dynamically through all the
above protocols, the default interface uses the 'sysDefaultIpAddr'
configured in the system.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.4 |
sysDefaultIpAddrDefault IP Address of the system.
This IP address, if modified, will take effect only when the
configuration is stored & restored.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.5 |
sysDefaultIpSubnetMaskIP subnet mask for the default IP address.
This subnet mask, if modified, will take effect only when the
configuration is stored & restored.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.6 |
sysRestartThis object allows the user to restart the Switch
(i.e)the entire switch will operationally go down and
start again. Setting a value of 'true' causes the switch
to be restarted.
When the switch operationally goes down, configuration
save operation is initiated based on the configuration save
option chosen.
When the switch operationally come up, the saved configurations
are restored based on the restore option chosen.
Once the switch is restarted, the value of this object reverts
to 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.9 |
sysConfigSaveOptionSpecifies whether the configurations of the switch has to be
saved or not.
The value 'noSave' specifies that the configurations need
not be saved.
The value 'flashSave' specifies that the configurations need
to be saved in flash in the specified file name sysConfigSaveFileName.
The value 'remoteSave' specifies that the configurations need
to be saved in specified remote system.
The value 'startupConfig' specifies that the configurations need
to be saved in flash in the 'Startup Configuration File'.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.10 |
sysConfigSaveIpAddrIP Address of the remote system to which the switch
configurations have to be saved.
This object is valid only if 'sysConfigSaveOption' is chosen to be
'remoteSave'.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.11 |
sysConfigSaveFileNameName of the file in which the switch configurations are
to be saved.
This object is valid only if 'sysConfigSaveOption' is chosen
to be 'flashSave' or 'remoteSave'.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.12 |
sysInitiateConfigSaveWhen set as 'true' switch configurations save operation is
initiated.
As soon as the configuration save operation is completed, the value
of this object reverts back to 'false'.
All the configurations made via the three interfaces
viz.
-> commandline interface
-> Web Interface
-> SNMP interface
are saved either in 'Startup Configuration File' in the flash or
in the specified 'sysConfigSaveFileName' in the flash or
in the chosen remote system, dsysending upon 'ConfigSaveOption'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.13 |
sysConfigSaveStatusStatus of configuration save operation.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.14 |
sysConfigRestoreOptionSpecifies whether the switch configurations have to be restored
or not.
The value 'noRestore' specifies that the switch configurations
need not be restored when the system is restarted.
The value 'restore' specifies that the configurations
need to be restored from the 'Startup Configuration File' in the flash
when the system is restarted.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.15 |
sysRemoteConfigRestoreIpAddrIP Address of the remote system from where the switch configurations
have to be downloaded to the 'Startup Configuration File' in the flash.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.16 |
sysConfigRestoreFileNameThe configuration file name in the remote system which has to be
downloaded to the 'Startup Configuration File' and set this name
to 'Startup Configuration Restire File Name' in the flash.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.17 |
sysInitiateRemoteConfigRestoreWhen set as 'true', the switch configurations will be downloaded
from the specified remote system to the 'Startup Configuration File'
in the flash.
As soon as the configuration download operation is completed, the value
of this object reverts back to 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.18 |
sysConfigRestoreStatusThe status of the switch configuration restore operation.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.19 |
sysDlFirmwareFromIpThe Ip Address of machine from where the firmware has to be downloaded.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.20 |
sysDlFirmwareNameThe firmware name which is to be downloaded to the switch.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.21 |
sysInitiateDlFirmwareInitiates the firmware Download operation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.22 |
sysLoggingOptionThe option specifies whether the debug logging messages is to be
sent to console or to a file(system buffer) in the system.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.23 |
sysUploadLogFileToIpThe Ip address of TFTP server to which the log file is to be uploaded.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.24 |
sysLogFileNameThe file name to be used for uploading the logs to the remote system.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.25 |
sysInitiateUlLogFileInitiates uploading of log file to the specified IP address in
'sysUploadLogFileToIp'.
The logs will be uploaded and saved in a file using the file name which was
specified in 'sysLogFileName'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.26 |
sysSysContactThe textual identification of the contact person for this
managed node, together with information on how to contact
this person. If no contact information is known, the value
is the zero-length string.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.29 |
sysSysLocationThe physical location of this node (e.g., `telsyshone
closet, 3rd floor'). If the location is unknown, the value
is the zero-length string.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.30 |
sysLoginAuthenticationThe mechanism by which the user login to access the GUI for
configuration has to be authenticated. Authentication is done
either locally or in the remote side through a RADIUS Server.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.31 |
sysSwitchBaseMacAddressEthernet address (base address) of the Switch.
This base Mac Address, if modified, will take effect only when the
Switch is restarted.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.32 |
sysSwitchDateThe date is display in the switch in the format,
Hours:Minutes:Seconds Day Month Year
e.g 19:10:31 11 08 2005
01-12 Month - beginning from January to December
The railway time 00 to 24 hours can be displayed.
The Display of the date is in the format ,
WeekDay Month Day Hours:Minutes:Seconds Year
e.g 04 09 21 18:11:30 2005
01-07 WeekDay - beginning from Sunday to Saturday
01-12 Month - beginning from January to Decemberro DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.34 |
sysHttpPortThe port to be used by the hosts/PC to configure ISS using the Web Interface
The HTTP server must be disabled before this configuration is donerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.37 |
sysHttpStatusThis object is for enabling or disabling HTTP in the system.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.38 |
sysDefaultVlanIdThe Default VLAN Identifier to be used at system startup.
The VLAN Module creates this vlan as the default vlan.
The Default VLAN Identifier, if modified, will take effect
only when the switch is restartedrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.41 |
sysWebAutoTimeoutIntervalThis time interval to be used at counting time seconds to
logout web interface automatically.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.42 |
sysCliAutoTimeoutIntervalThis time interval to be used at counting time seconds to
logout command interface automatically.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.43 |
sysCpuPolicerStatusThis object is for enabling or disabling cpu policer in the system.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.44 |
sysLedEcoModeStatusThis object is for enabling or disabling LED ECO mode in the system.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.45 |
sysPowerSavingEnableThis object is for enabling or disabling powersaving in the system.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.62 |
sysDhcpAutoConfigurationThis object is for enabling or disabling DHCP auto configuration in the system.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.63 |
sysAsyVLANEnableThis object is for set asyvlan to ivl or svl in the system.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.64 |
issCosEnableThis object is for enabling or disabling COS in the system.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.65 |
sysTrapEnableThis object is for enabling or disabling Trap in the system.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.66 |
sysFDResetStateEnableEnable/Disable Factory Default Reset function.
The Factory Default Reset function is used to enable or disable
the push button and reset function on the device.
When the user wants to disable reset function that must be configure
a password to lock it. Once want to recovery the reset function,
the password was needed to verify authorize.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.67 |
sysFDRInputPwInput a password first and then the sysFDResetStateEnable can work correctly.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.1.68 |
sysConfigControl OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2 |
sysConfigCtrlTableA table to control device features like egress traffic control,
stats collection, etc. either for the entire switch or for each
interface in the switch. SEQUENCE OF TabConfigCtrlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.1 |
sysConfigCtrlEntryAn entry appears in this table for each interface in the system.
In addition to that an entry with index '0' is created in this
table by default.
If 'sysConfigCtrlStatus' of the entry '0' is made 'valid', then
global control is chosen and the values against entry '0' is
applicable for all the interfaces of the switch.
If 'sysConfigCtrlStatus' of the entry '0' is made 'invalid',
then interface-wise control is chosen & the values against each
interface index is applicable for that interface.
At a particular point of time, either global control will be
applicable or interface-wise control is applicable.
Both will not be considered together.
Index to the table is the interface index of the port. TabConfigCtrlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.1.1 |
sysConfigCtrlIndexInterface index of the port for which the configuration
in this entry applies.
If any configuration is made in this table for the index '0',
that configuration will be considered as global configuration
and is applicable for all the interfaces of the switch. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.1.1.1 |
sysConfigCtrlEgressStatusControls the transmission of egress traffic over this interface.
This value for entry '0' controls the egress traffic over all
interfaces.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.1.1.2 |
sysConfigCtrlStatsCollectionEnables or disables statistics collection for this interface.
This value for entry '0' controls the stats collection for all
interfaces.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.1.1.3 |
sysConfigCtrlStatusSpeficies the validity of the entry.
If the 'Config Control Status' for entry '0' is made 'valid',
then global control is chosen in the system.
It signifies that the values against entry '0' is applicable
for all the interfaces of the switch.
If the 'Config Control Status' for entry '0' is made 'invalid',
then interface-wise control is chosen.
Then the values against each interface index is applicable
for that interface.
By default, 'sysConfigCtrlStatus' will be 'invalid' for
entry '0' and 'valid' for all other entries.
(ie) by default, interface-wise configuration is enabled
in the system.
The status of entries other than the zeroth(0th) entry can not be
made 'invalid'.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.1.1.4 |
sysPortCtrlTableA table to control the port specific parameters of the device like speed,
duplex mode, etc. SEQUENCE OF TabPortCtrlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.2 |
sysPortCtrlEntryAn entry appears in this table for each interface in the system.
Index to the table is the interface index of the port. TabPortCtrlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.2.1 |
sysPortCtrlIndexInterface index of the port for which the configuration
in this entry applies. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.2.1.1 |
sysPortCtrlModeSpeficies the mode in which the speed, duplex modes and flow control
of the interface is determined.
If set as 'auto', the hardware senses speed and negotiates with the port
on the other end of the link for data transfer operation as
'full-duplex' or 'half-duplex' and about flow contol.
If set as 'nonegotiation', the configured values for interface
speed, duplex mode and flow control will be effective.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.2.1.2 |
sysPortCtrlDuplexConfigures interface data transfer mode as full-duplex or half-duplex.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peerrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.2.1.3 |
sysPortCtrlSpeedConfigures interface speed.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peerrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.2.1.4 |
sysPortCtrlFlowControlEnables / disables flow control for the interface.
This object be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peerrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.2.1.5 |
sysPortCtrlMDISets the auto/mdi/mdix of the copper interface. Fiber media is not support.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.2.1.10 |
issJumboFramePerPortEnableGigabit Web Smart Switches support jumbo frames (frames larger than
the Ethernet frame size of 1522 bytes) of up to 10,000 bytes (tagged).
Default jumbo frame is disabled.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.2.1.11 |
issJumboFramePerPortMtuGigabit Web Smart Switches support jumbo frames (frames larger than
the Ethernet frame size of 1522 bytes) of up to 10,000 bytes (tagged).
Default jumbo frame MTU is 10000.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.2.1.12 |
sysPortCtrlEAPPassThroughEnables / disables dot1x EAP packet pass through for the interface.
This object be configured only if the dot1x is disabled.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.2.1.13 |
sysPortCtrlBPDUPassThroughEnables / disables STP BPDU passthrough for the interface.
This object be configured only if the RSTP/MSTP is disabled.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.2.2.1.14 |
sysMirror OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.3 |
sysMirrorStatusProvides control over the mirroring feature in the switch.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.3.1 |
sysMirrorToPortSpecifies the port to which the mirrored traffic in the system
is to be copied.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.3.2 |
sysMirrorCtrlTableA table to control mirroring features either for the entire
switch or for each interface in the switch.
Parameters in this table are valid only when the
'sysMirrorStatus' for the switch is not 'disabled'. SEQUENCE OF TabMirrorCtrlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.3.3 |
sysMirrorCtrlEntryAn entry appears in this table for each interface
in the system. TabMirrorCtrlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.3.3.1 |
sysMirrorCtrlIndexThe interface index of the port for which the configuration
in this entry applies. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.3.3.1.1 |
sysMirrorCtrlIngressMirroringProvides control to enable or disable mirroring of ingress
traffic over this interface to the mirrored-to port.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.3.3.1.2 |
sysMirrorCtrlEgressMirroringProvides control to enable or disable mirroring of egress
traffic over this interface to the mirrored-to port.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.3.3.1.3 |
sysMirrorCtrlStatusProvides control to enable or disable mirroring of egress
traffic over this interface to the mirrored-to port.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.3.3.1.4 |
sysRateControl OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.4 |
sysRateCtrlTableA table to control the rate limiting parameters
either for the entire switch or for each interface in the switch. SEQUENCE OF TabRateCtrlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.4.1 |
sysRateCtrlEntryAn entry appears in this table for each physical
interface in the switch. TabRateCtrlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.4.1.1 |
sysRateCtrlIndexThe interface index for which the configuration in this
entry applies. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.4.1.1.1 |
sysRateCtrlEgressLimitValueConfigures interface Rate Limit (Packet that can be transferred
on a port at a particular second).
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the rate limit will be applied.
This value can also be affected by the metering. A value of zero(0)
disable rate limiting i.e. sets the port to full speed. The value can
be set between 64~100000(Kbits per second) in FE port, 64~1000000
(Kbits per second) in GE port.
(Note: The multiple of 1850 Kbits/sec will be set automatically because
the resolution of Giga-port Tx bandwidth control is 1850 Kbits/sec.)rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.4.1.1.5 |
sysRateCtrlIngressLimitValueAllows to configure the limiting value for the maximum number
of receive packets that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for receive packets on this interface. The value that
can be set for this object is limited by the underlying hardware.
The value can be set between 64~100000(Kbits per second) in FE
port, 64~1000000(Kbits per second) in GE port.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.4.1.1.7 |
sysIpAuthMgr OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.7 |
sysIpAuthMgrStatusProvides control over the Ip authentication management feature in the switch.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.7.1 |
sysIpAuthMgrTableA table to configure IP authorized managers in the system. SEQUENCE OF TabIpAuthMgrEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.7.2 |
sysIpAuthMgrEntryEach entry in this table rsysresents rules for particular
IP authorized manager. TabIpAuthMgrEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.7.2.1 |
sysIpAuthMgrIpAddrSpecifies either the Network or Host address from which the switch
can be managed.
An address 0.0.0.0 indicates 'Any Manager'. IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.7.2.1.1 |
sysIpAuthMgrIpMaskSpecifies the IP address mask to be applied on sysIpAuthMgrIpAddr.
Value 0.0.0.0 indicates mask for 'Any Manager'. IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.7.2.1.2 |
sysIpAuthMgrPortListSpecifies the port numbers through which the authorized manager can
access the switch.
By default the authorized manager is allowed to access the switch
through all the ports.
If a set of ports are configured in the 'PortList', the manager can
access the switch only through the configured ports.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.7.2.1.3 |
sysIpAuthMgrVlanListSpecifies the Vlan's in which the IP authorized manager can reside.
By default the manager is allowed to reside in any vlan.
If a set of vlans are configured in the 'VlanList', the manager can
reside only in the configured vlan set. Access to the switch
will be denied from any other vlan.rw OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.7.2.1.4 |
sysIpAuthMgrAllowedServicesSpecifies the allowed services through which the authorized manager can
access the switch.
This object takes bit mask values. The services rsysresented by each bit
position is as given below:
With bit 0 being the Least Significant Bit,
Bit0
Bit1
Bit2
Bit3
Bit4
If the particular bit is set to 1,corresponding service is allowed for
the configured manager.
By default all services are allowed for the configured manager.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.7.2.1.6 |
sysIpAuthMgrRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.7.2.1.7 |
sysStormControl OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.12 |
sysStormCtrlTableA table to control the rate limiting parameters
either for the entire switch or for each interface in the switch. SEQUENCE OF TabStormCtrlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.12.1 |
sysStormCtrlEntryAn entry appears in this table for each physical
interface in the switch. TabStormCtrlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.12.1.1 |
sysStormCtrlIndexThe interface index for which the configuration in this
entry applies. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.12.1.1.1 |
sysDlfOnOffThis object indicates unknown unicast storm control function is enabled or disabled
for device.
When you enable unknown unicast storm control function, it
will allowed you to limit the number of unknown unicast packets
per second going through device.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.12.1.1.2 |
sysBroadcastOnOffThis object indicates broadcast storm control function is enabled or disabled
for device.
When you enable broadcast storm control function, it
will allowed you to limit the number of broadcast packets
per second going through device.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.12.1.1.3 |
sysMulticastOnOffThis object indicates multicast storm control function is enabled or disabled
for device.
When you enable multicast storm control function, it
will allowed you to limit the number of multicast packets
per second going through device.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.12.1.1.4 |
sysStormCtrlThresholdAllows to configure the limiting value for the maximum number
of packets that can be transmitted per second over this interface.
Setting this object to the value zero disables rate limiting on
this interface. The value that can be set for this object is
limited by the underlying hardware. The limit value must be low,
medium, or high.
(Notice : if the limit value is 0, it means unlimited.)rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.12.1.1.5 |
sysStormCtrlRowStatus*This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.12.1.1.6 |
sysLBDdetect OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.22 |
sysLBDStateEnableEnable/Disable Loopback detection function.
The Loopback Detection function is used to detect the loop created
by a specific port while Spanning Tree Protocol (STP) is not
enabled in the network, especially when the down links are hubs
or unmanaged switchs.The Switch will automatically shutdown the
port and sends a log to the administrator.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.22.1 |
sysLBDIntervalSet a Loop detection Interval between 1 and 32767 seconds.
The default is 2 seconds.
This time interval to be used at counting time seconds to
resend the CTP packet automatically.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.22.2 |
sysLBDRecoverTimeThis time interval to be used at counting time seconds to
recover the disabled port automatically.
The Loop Detection Recover Time can be set at 0 seconds,
or 60 to 1000000 seconds.
Entering 0 will disable the Loop Detection Recover Time.
The default is 60 seconds.rw Integer32 (0 | 60..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.22.3 |
sysLBDCtrlTableA table to control Loopback detection features either for
the entire switch or for each interface in the switch. SEQUENCE OF SysLBDCtrlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.22.4 |
sysLBDCtrlEntryAn entry appears in this table for each interface
in the system. SysLBDCtrlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.22.4.1 |
sysLBDCtrlIndexThe interface index of the port for which the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.22.4.1.1 |
sysLBDPortStatusProvides control to per port enable or disable the loopback detection
function. Default is disabled.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.22.4.1.2 |
sysLBDPortLoopStatusThe loop status for this port.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.22.4.1.3 |
sysUserAuthMgr OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.30 |
sysUserAuthMgrTableA table to configure user authorized managers in the system. SEQUENCE OF TabUserAuthMgrEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.30.1 |
sysUserAuthMgrEntryUser tabale entry. TabUserAuthMgrEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.30.1.1 |
sysUserAuthMgrIdUser ID used for administration of this device.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.30.1.1.1 |
sysUserAuthMgrNameUser Name used for administration of this device.ro OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.30.1.1.2 |
sysUserAuthMgrRowStatusThis object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.81.30.1.1.3 |
l2Dfs OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83 |
sysDfsMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1 |
sysDfsMFClassifier OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.2 |
sysDfsMultiFieldClfrTableThis table contains the Multifield Classifier details. (In WEB, it means Class Map) SEQUENCE OF TabDscpMultiFieldClfrEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.2.1 |
sysDfsMultiFieldClfrEntryAn IP Multi-field Classifier entry describes a single MF Classifier. TabDscpMultiFieldClfrEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.2.1.1 |
sysDfsMultiFieldClfrIdAn index that enumerates the MultiField Classifier filter. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.2.1.1.1 |
sysDfsMultiFieldClfrFilterIdThis Object specifies the ID of the filter the details of which
should be matched against the incoming packetrw Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.2.1.1.2 |
sysDfsMultiFieldClfrFilterTypeThis Object specifies the type of the filterrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.2.1.1.3 |
sysDfsMultiFieldClfrStatusThe status of this concsystual row. All writable objects in this
row may be modified only when the row status is not active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.2.1.1.4 |
sysDfsClassifier OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.3 |
sysDfsClfrTableThis table contains the Multifield filter details. (In WEB, it means Policy Map) SEQUENCE OF TabDscpClfrEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.3.1 |
sysDfsClfrEntryAn entry in the classifier table describes a single classifier.
All classifier elements belonging to the same classifier use the
classifier's sysDfsClfrId as part of their index. TabDscpClfrEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.3.1.1 |
sysDfsClfrIdAn index that enumerates the classifier entries. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.3.1.1.1 |
sysDfsClfrMFClfrIdThe Object refers to a MultiField Classifier Id which is the index
for the MF Classifier table. A Valid value of this object is
not mandatory for the creation of an entry in this table.
Need to map a Class ID (sysDfsMultiFieldClfrId)rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.3.1.1.2 |
sysDfsClfrInProActionIdThe Object refers to a In Profile Action Id which is the index
for the InProfile Action Table. A Valid value of this object is
not mandatory for the creation of an entry in this table.
Must the same with sysDfsClfrId.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.3.1.1.3 |
sysDfsClfrOutProActionIdThe Object refers to a Out Profile Action Id which is the index
for the OutProfile Action Table. A Valid value of this object is
not mandatory for the creation of an entry in this table.
Must the same with sysDfsClfrId.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.3.1.1.4 |
sysDfsClfrStatusThe status of this concsystual row. The objects
sysDfsClfrInProActionId and sysDfsClfrOutProActionId
can be modified at any time. But the other Objects can not be
modified when the RowStatus is 'active'for the particular entry.
when the Row Status is set to 'destroy'for any of the entries
only the entry is removed from the table. As the Object in this
table are indexed to various other tables they stand unmodified
by setting the RowStatus to 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.3.1.1.5 |
sysDfsInProfileAction OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.4 |
sysDfsInProfileActionTableThe Action Table enumerates actions that can be performed to a
stream of traffic which is inprofile.For example, traffic exiting
from a meter may be counted, marked, and potentially dropped before
entering a queue. SEQUENCE OF TabDscpInProfileActionEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.4.1 |
sysDfsInProfileActionEntryEach entry in the action table allows description of one of
action to be applied to traffic dsysending upon the treatment
selected by sysDfsInProfileActionFlag. TabDscpInProfileActionEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.4.1.1 |
sysDfsInProfileActionIdAn index that enumerates the In Profile Action entries.
Must be match the Policy ID. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.4.1.1.1 |
sysDfsInProfileActionFlagThis Object defines the action to be performed on the packet,
when the packets are found to be In profile.
Default Priority = 1 (0x0001), TOS = 4 (0x0004), DSCP = 1024 (0x0400)rw Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.4.1.1.2 |
sysDfsInProfileActionNewPrioThis Object kesyss the new priority value in case the action
selected by sysDfsInProfileActionFlag is to assign a new
priority/COS value.rw Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.4.1.1.3 |
sysDfsInProfileActionDscpThis Object kesyss the new DSCP value in case the action
selected by sysDfsInProfileActionFlag is to assign a new
DSCP value.rw DscpOrAny .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.4.1.1.6 |
sysDfsInProfileActionStatusThe status of this concsystual row. All writable objects in this
row may be modified only when the row status is not active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.4.1.1.7 |
sysDfsOutProfileAction OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.5 |
sysDfsOutProfileActionTableThe Action Table enumerates actions that can be performed to a
stream of traffic which is out of profile.For example, traffic exiting
from a meter may be counted, marked, and potentially dropped before
entering a queue. SEQUENCE OF TabDscpOutProfileActionEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.5.1 |
sysDfsOutProfileActionEntryEach entry in the action table allows description of one of
action to be applied to traffic dsysending upon the treatment
selected by sysDfsOutProfileActionFlag. TabDscpOutProfileActionEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.5.1.1 |
sysDfsOutProfileActionIdAn index that enumerates the Out Profile Action entries.
Must the same with sysDfsClfrId. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.5.1.1.1 |
sysDfsOutProfileActionFlagThis Object defines the action to be performed on the packet
when the packets are found to be out of profile.
Drop = 2 (0x0002) DSCP = 4 (0x0004)rw Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.5.1.1.2 |
sysDfsOutProfileActionMIDThis Object kesyss the Meter Id to be added to the DataPath
to which this particular OutProfileAction is applicable.
Must the same with sysDfsClfrId.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.5.1.1.4 |
sysDfsOutProfileActionStatusThe status of this concsystual row. All writable objects in this
row may be modified only when the row status is not active. The
row comprises of an Meter Id which is an index to the Meter Table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.5.1.1.5 |
sysDfsMeter OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.6 |
sysDfsMeterTableThe Meter Table has the number of token with it and refreshCount value
for associated with the meter. SEQUENCE OF TabDscpMeterEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.6.1 |
sysDfsMeterEntryAn entry in the Meter Table describing a single instance of
a Metering Unit. TabDscpMeterEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.6.1.1 |
sysDfsMeterIdAn index that enumerates the Meter entries.
Must the same with sysDfsClfrId. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.6.1.1.1 |
sysDfsMeterRefreshCountThis values specifies the number of tokens to be added to the
meter bucket after each 8 usec. (Threshold kbps)rw Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.6.1.1.3 |
sysDfsMeterStatusThe status of this concsystual row. All writable objects in this
row may be modified only when this rowstatus in not active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.6.1.1.4 |
sysDfsEnterpriseCoSqAlgorithm OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.8 |
sysDfsCoSqAlgorithmTableA table containing the scheduling algorithm applied to
a particular port. SEQUENCE OF TabDscpCoSqAlgorithmEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.8.1 |
sysDfsCoSqAlgorithmEntryAn entry in this table gives mapping of a Port to
user defined scheduled algorithm. TabDscpCoSqAlgorithmEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.8.1.1 |
sysDfsPortIdPort identifier to which scheduling algorightm is set. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.8.1.1.1 |
sysDfsCoSqAlgorithmSets the packet scheduling algorithm for the port
The default is strictPriority(1).rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.83.1.8.1.1.2 |
l2Syslog OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.89 |
sysSyslogGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.89.1 |
sysSyslogLoggingThis object is for enabling or disabling syslog alert
features in the system.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.89.1.1 |
sysSyslogTimeStampThis object is for enabling or disabling timestamp option.
When enabled, the messages (log alert messages) will
hold the time stamp information.
When disabled, the time stamp information will not be carried with
the messages sent to the log servers.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.89.1.2 |
sysSyslogSysBuffersNumber of log buffers to be allocated in the systemrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.89.1.4 |
sysSyslogClearLogClears the buffered logs.
This object is set to 'false' by default.
When set to 'True', the buffered logs will be cleared and the value
of this object will become 'false' again.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.89.1.5 |
sysSyslogConfigTableA table for configuring module specific log levels. SEQUENCE OF TabSyslogConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.89.1.6 |
sysSyslogConfigEntryAn entry containing logging level options for a particular module. TabSyslogConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.89.1.6.1 |
sysSyslogConfigModuleSpecifies the module for which the log level option has to be
configured. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.89.1.6.1.1 |
sysSyslogConfigLogLevelSpecifies the log level option to be set for a specific module.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.89.1.6.1.2 |
sysSyslogFacilityThe Syslog standard facilities.
The facility to be used when sending Syslog messages to this server.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.89.1.7 |
sysSyslogLogs OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.89.2 |
sysSyslogLogSrvAddrSpecifies the syslog server IP to be used for remote logging. When
configured, a new socket will be opened for this address.
When the address is changed, the socket opened for the previous address
will be closed and a new socket will be opened for this address.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.89.2.1 |
l2Security OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.95 |
sysPortSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.95.1 |
sysPortSecurityTableA list of port default priority Entries. SEQUENCE OF TabPortSecEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.95.1.1 |
sysPortSecurityEntryA list of port default priority priorities. TabPortSecEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.95.1.1.1 |
sysPortSecurityIndexThe interface index for which the configuration in this
entry applies. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.95.1.1.1.1 |
sysPortSecurityStateThe security state on specific port.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.95.1.1.1.2 |
sysPortSecurityMLAThe max. learning number of MAC entries on specific portrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.95.1.1.1.3 |
l2Ssl OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.96 |
sysSslGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.96.1 |
sysSslSecureHttpStatusThis object is for enabling or disabling secure HTTP in the system.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.96.1.2 |
sysSslPortThis object is to configure the SSL port.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.96.1.3 |
sysSslTraceSet the trace level for SSL.
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - Management trace.
BIT 2 - Data path trace.
BIT 3 - Control Plane trace.
BIT 4 - Packet Dump.
BIT 5 - OS Resource trace.
BIT 6 - All Failure trace (All failures including Packet Validation)
BIT 7 - Buffer Trace.
Note:BIT 0 - Least significant bit
BIT 7 - Most significant bit
For example,setting the trace level to the value -0001 0101,
will enable Init-Shutdown, data path and packet dump trace levels.
Setting all the bits will enable all the trace levels and
resetting them will disable all the trace levels.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.96.1.4 |
sysSslCiphers OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.96.2 |
sysSslCipherListThis object is to configure the cipher-suites list.
This field is a bit mask, setting a bit indicates that the
corresponding cipher-list will be involved in the server
authentication.
BIT 0 - RSA-NULL-MD5
BIT 1 - RSA-NULL-SHA1
BIT 2 - RSA-DES-SHA1
BIT 3 - RSA-3DES-SHA1
BIT 4 - DH-RSA-DES-SHA1
BIT 5 - DH-RSA-3DES-SHA1
BIT 6 - RSA-EXP1024-DES-SHA1
Note:BIT 0 - Least significant bit
BIT 6 - Most significant bit
For example,setting the cipher list to the value - 001 0101,
will include RSA-NULL-MD5, RSA-DES-SHA1 and DH-RSA-DES-SHA1 as
cipher-list for authentication.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.96.2.1 |
sysSslDefaultCipherListThis object is to set the default cipher-suites list in 'sysSslCipherList'.
Setting DefaultCipherList to TRUE would set the following cipher-list for
authentication:
- RSA_3DES_SHA1
- RSA_DES_SHA1
- RSA_EXP1024_DES_SHA1
The value of this object reverts back to FALSE once the default cipher list is set.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.96.2.2 |
l2Ssh OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.97 |
sysSshGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.97.1 |
sysSshVersionCompatibilityThis object is to configure the SSH version compatibility mode.
When set to TRUE, both SSH version-1 and SSH Version-2 will be supported.
When set to FALSE, SSH version-2 only will be supported.
By default SSH version-2 is supported.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.97.1.1 |
sysSshCipherListThis object is to configure the cipher-suites list.
This object takes values as bit mask. Setting a bit indicates that the
corresponding cipher-list will be used for Encryption.
The value of each bit position is as given below with bit 0 being the
least significant bit:
BIT 1 - DES-CBC
BIT 0 - 3DES-CBCrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.97.1.2 |
sysSshMacListThis object is to configure the MAC-list.
This object takes values as bit mask. Setting a bit indicates that the
corresponding MAC-list will be used for authentication.
The value of each bit position is as given below with bit 0 being the
least significant bit:
BIT 1 - HMAC-MD5
BIT 0 - HMAC-SHA1rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.97.1.3 |
sysSshTraceSet the trace level for SSH.
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - Management trace.
BIT 2 - Data path trace.
BIT 3 - Control Plane trace.
BIT 4 - Packet Dump.
BIT 5 - OS Resource trace.
BIT 6 - All Failure trace (All failures including Packet Validation)
BIT 7 - Buffer Trace.
Note:BIT 0 - Least significant bit
BIT 7 - Most significant bit
For example,setting the trace level to the value -0001 0101,
will enable Init-Shutdown, data path and packet dump trace levels.
Setting all the bits will enable all the trace levels and
resetting them will disable all the trace levels.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.97.1.4 |
sysSshStatusThis object is for enabling or disabling ssh in the system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.97.1.5 |
l2Sntp OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99 |
sysSntpGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.1 |
sysSntpStatusThis object is for enabling or disabling SNTP Client
feature in the system.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.1.1 |
sysSntpPollIntervalThe SNTP server polling interval in seconds.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.1.2 |
sysSntpTimeSecondsThis object is for setting the system time in seconds from
Epoch (00:00:00 UTC, January 1, 1970).rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.1.3 |
sysSntpPrimarySrvAddrSpecifies the primary SNTP server IP to be used for network time syncronization.
When configured, a new socket will be opened for this address.
When the address is changed, the socket opened for the previous address
will be closed and a new socket will be opened for this address.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.1.4 |
sysSntpSecondSrvAddrSpecifies the secondary SNTP server IP to be used for network time syncronization.
If the primary SNTP server fail, the system will try secondary SNTP server.
When configured, a new socket will be opened for this address.
When the address is changed, the socket opened for the previous address
will be closed and a new socket will be opened for this address.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.1.5 |
sysSntpTimeZoneMappingIndexThis object is used for distinguishing areas in the same time zone.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.1.6 |
sysSntpTzGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.2 |
sysSntpTzDSTStatusThis object is for enabling or disabling Time Zone Daylight Saving Time
feature in the system.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.2.1 |
sysSntpTzMinutesWestSpecifies the Time Zone Offset from GMT in +/- Minutes.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.2.2 |
sysSntpTzDSTStartMonThe start month of Daylight Saving Time.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.2.3 |
sysSntpTzDSTStartDayThe start day of Daylight Saving Time.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.2.4 |
sysSntpTzDSTStartHourThe start hour of Daylight Saving Time.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.2.5 |
sysSntpTzDSTStartMinuteThe start minutes of Daylight Saving Time.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.2.6 |
sysSntpTzDSTEndMonThe end month of Daylight Saving Time.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.2.7 |
sysSntpTzDSTEndDayThe end day of Daylight Saving Time.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.2.8 |
sysSntpTzDSTEndHourThe end hour of Daylight Saving Time.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.2.9 |
sysSntpTzDSTEndMinuteThe end minutes of Daylight Saving Time.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.2.10 |
sysSntpTzDSTForwardOffsetThe adjusted time of Daylight Saving Time.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.99.2.11 |
l2Dscp OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100 |
sysDscpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1 |
sysDscpEnableEnable / Disable DiffServ functionrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.1 |
sysDscpTypeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2 |
sysDscpType01DiffServ Type 01 : IP ToS value = 0rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.1 |
sysDscpType02DiffServ Type 02 : IP ToS value = 4rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.2 |
sysDscpType03DiffServ Type 03 : IP ToS value = 8rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.3 |
sysDscpType04DiffServ Type 04 : IP ToS value = 12rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.4 |
sysDscpType05DiffServ Type 05 : IP ToS value = 16rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.5 |
sysDscpType06DiffServ Type 06 : IP ToS value = 20rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.6 |
sysDscpType07DiffServ Type 07 : IP ToS value = 24rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.7 |
sysDscpType08DiffServ Type 08 : IP ToS value = 28rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.8 |
sysDscpType09DiffServ Type 09 : IP ToS value = 32rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.9 |
sysDscpType10DiffServ Type 10 : IP ToS value = 36rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.10 |
sysDscpType11DiffServ Type 11 : IP ToS value = 40rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.11 |
sysDscpType12DiffServ Type 12 : IP ToS value = 44rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.12 |
sysDscpType13DiffServ Type 13 : IP ToS value = 48rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.13 |
sysDscpType14DiffServ Type 14 : IP ToS value = 52rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.14 |
sysDscpType15DiffServ Type 15 : IP ToS value = 56rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.15 |
sysDscpType16DiffServ Type 16 : IP ToS value = 60rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.16 |
sysDscpType17DiffServ Type 17 : IP ToS value = 64rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.17 |
sysDscpType18DiffServ Type 18 : IP ToS value = 68rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.18 |
sysDscpType19DiffServ Type 19 : IP ToS value = 72rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.19 |
sysDscpType20DiffServ Type 20 : IP ToS value = 76rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.20 |
sysDscpType21DiffServ Type 21 : IP ToS value = 80rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.21 |
sysDscpType22DiffServ Type 22 : IP ToS value = 84rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.22 |
sysDscpType23DiffServ Type 23 : IP ToS value = 88rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.23 |
sysDscpType24DiffServ Type 24 : IP ToS value = 92rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.24 |
sysDscpType25DiffServ Type 25 : IP ToS value = 96rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.25 |
sysDscpType26DiffServ Type 26 : IP ToS value = 100rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.26 |
sysDscpType27DiffServ Type 27 : IP ToS value = 104rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.27 |
sysDscpType28DiffServ Type 28 : IP ToS value = 108rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.28 |
sysDscpType29DiffServ Type 29 : IP ToS value = 112rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.29 |
sysDscpType30DiffServ Type 30 : IP ToS value = 116rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.30 |
sysDscpType31DiffServ Type 31 : IP ToS value = 120rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.31 |
sysDscpType32DiffServ Type 32 : IP ToS value = 124rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.32 |
sysDscpType33DiffServ Type 33 : IP ToS value = 128rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.33 |
sysDscpType34DiffServ Type 34 : IP ToS value = 132rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.34 |
sysDscpType35DiffServ Type 35 : IP ToS value = 136rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.35 |
sysDscpType36DiffServ Type 36 : IP ToS value = 140rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.36 |
sysDscpType37DiffServ Type 37 : IP ToS value = 144rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.37 |
sysDscpType38DiffServ Type 38 : IP ToS value = 148rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.38 |
sysDscpType39DiffServ Type 39 : IP ToS value = 152rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.39 |
sysDscpType40DiffServ Type 40 : IP ToS value = 156rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.40 |
sysDscpType41DiffServ Type 41 : IP ToS value = 160rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.41 |
sysDscpType42DiffServ Type 42 : IP ToS value = 164rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.42 |
sysDscpType43DiffServ Type 43 : IP ToS value = 168rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.43 |
sysDscpType44DiffServ Type 44 : IP ToS value = 172rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.44 |
sysDscpType45DiffServ Type 45 : IP ToS value = 176rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.45 |
sysDscpType46DiffServ Type 46 : IP ToS value = 180rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.46 |
sysDscpType47DiffServ Type 47 : IP ToS value = 184rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.47 |
sysDscpType48DiffServ Type 48 : IP ToS value = 188rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.48 |
sysDscpType49DiffServ Type 49 : IP ToS value = 192rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.49 |
sysDscpType50DiffServ Type 50 : IP ToS value = 196rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.50 |
sysDscpType51DiffServ Type 51 : IP ToS value = 200rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.51 |
sysDscpType52DiffServ Type 52 : IP ToS value = 204rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.52 |
sysDscpType53DiffServ Type 53 : IP ToS value = 208rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.53 |
sysDscpType54DiffServ Type 54 : IP ToS value = 212rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.54 |
sysDscpType55DiffServ Type 55 : IP ToS value = 216rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.55 |
sysDscpType56DiffServ Type 56 : IP ToS value = 220rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.56 |
sysDscpType57DiffServ Type 57 : IP ToS value = 224rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.57 |
sysDscpType58DiffServ Type 58 : IP ToS value = 228rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.58 |
sysDscpType59DiffServ Type 59 : IP ToS value = 232rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.59 |
sysDscpType60DiffServ Type 60 : IP ToS value = 236rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.60 |
sysDscpType61DiffServ Type 61 : IP ToS value = 240rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.61 |
sysDscpType62DiffServ Type 62 : IP ToS value = 244rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.62 |
sysDscpType63DiffServ Type 63 : IP ToS value = 248rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.63 |
sysDscpType64DiffServ Type 64 : IP ToS value = 252rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.100.1.2.64 |
l2Snoop OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105 |
sysSnoopInst OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2 |
sysSnoopInstanceGlobalTableThis table contains multicast forwarding mode configuration
for each instance running in the snooping switch SEQUENCE OF TabSnoopInstanceGlobalEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.1 |
sysSnoopInstanceGlobalEntryThis table contains instance number and the multicast
forwarding mode configuration for the particular instance TabSnoopInstanceGlobalEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.1.1 |
sysSnoopInstanceGlobalInstIdInstance ID pertaining to the global configuration entry. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.1.1.1 |
sysSnoopInstanceGlobalSystemControlSnooping module is shutdown or started through
this object.
When set to 'start', resources required by the Enterprise
SNOOP module is allocated and the module starts running.
When set to 'shutdown', all the resources are released back
to the system and the module stops running.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.1.1.3 |
sysSnoopInstanceConfigTableThis table contains global configuration of snooping for each
instance running in switch SEQUENCE OF TabSnoopInstanceConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.2 |
sysSnoopInstanceConfigEntryThis table contains instance number, address type and the list of global
configuration for the particular instance and address type TabSnoopInstanceConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.2.1 |
sysSnoopInstanceConfigInstIdInstance ID pertaining to the global configuration entry.
Currently only one instance is supported so it is always 1 Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.2.1.1 |
sysSnoopInetAddressTypeInet Address Type corresponding to the global configuration entry.
This indicates whether the row is for IGMP/MLD Snooping InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.2.1.2 |
sysSnoopStatusEnables or disables IGMP/MLD snooping in the system.
When set to 'enabled', the Enterprise IGS/MLDS module starts
protocol operations.
When set to 'disabled', the IGS/MLDS module stops performing
protocol operations.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.2.1.3 |
sysSnoopRouterPortPurgeIntervalThis is the interval (in seconds) after which a learnt
router port entry will be purged. For each router port learnt,
this timer runs for 'RouterPortPurgeInterval' seconds.When the
timer expires, the learnt router port entry is purged. However
if control messages are received from the router before the
timer expiry, then the timer is restarted.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.2.1.5 |
sysSnoopPortPurgeIntervalThis is the interval (in seconds) after which a learnt
port entry will be purged. For each port on which rsysort
has been received this timer runs for 'PortPurgeInterval'
seconds. This timer will be restarted whenever a rsysort
message is received from a host on the specific port. If
the timer expires, then , the learnt port entry will
be purged from the multicast group.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.2.1.6 |
sysSnoopReportForwardIntervalThis timer is used when proxy-reporting is disabled,the
switch then has to suppress multiple IGMPv2/ MLDv1 report
messages for the same group from being forwarded to the router.
This is the interval (in seconds) within which report
messages for the same multicast group will not be forwarded.
The 'ReportForwardTimer' is per multicast group. This timer is
started as soon as a report message for that group is forwarded
out. Within this 'ReportForwardInterval' if another report for
the same group arrives, that report will not be forwarded.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.2.1.7 |
sysSnoopRetryCountWhen the switch receives leave message on a port, it
sends group specific query to check if there are any other
interested receivers for the group. This attribute defines
the maximum number of queries sent by the switch before deleting
the port from the group membership information in the forwarding
database. If the maximum retry count exceeds 'sysSnoopRetryCount',
then the port will be deleted from the multicast group membership
information in the forwarding database and received leave message
will be forwarded onto the router ports if there are no
interested receivers for the group.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.2.1.8 |
sysSnoopGrpQueryIntervalThe value of this attribute defines the time period with which
the switch will send group specific queries on a port to check
if there are any intersted receivers. The switch will send
'sysSnoopRetryCount' queries before removing the port from the
group membership information in the forwarding database.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.2.1.9 |
sysSnoopReportFwdOnAllPortsSnooping module will forward reports only on router
ports by default, to enable forwarding on all other ports
this object to provide a administrative control to forward the
reports on all the member ports of the VLANrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.2.1.10 |
sysSnoopOperStatusThe operational status of the IGS/MLDS protocol.
The value enabled(1) indicates the IGS/MLDS module is currently
enabled in the system.
The value disable(1) indicates the IGS/MLDS module is currently
disabled in the system.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.2.1.12 |
sysSnoopSendQueryOnTopoChangeThe Snooping Switch can be configured to send IGMP/MLD General
queries on all non router ports when spanning tree topology change
occurs in a network. If the spanning tree mode is RSTP, IGMP/MLD
general queries will be sent on all the non router ports present
in the switch.If the spanning tree mode is MSTP, IGMP/MLD general
queries will be sent on all the non router ports of the VLAN mapped
for the MSTP instance.When this object is set to 'enabled' ,the
switch will generate general query messagesrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.2.1.13 |
sysSnoopQuerierQueryIntervalThis is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier.
A switch should be configured as a querier for a VLAN
only when there are no queriers in the network.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.2.2.1.16 |
sysSnoopVlan OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3 |
sysSnoopVlanMcastMacFwdTableThis table contains MAC based multicast forwarding
information. This information is applicable only if
the 'sysSnoopMcastForwardingMode' is set to 'macbased' SEQUENCE OF TabSnoopVlanMcastMacFwdEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.1 |
sysSnoopVlanMcastMacFwdEntryThis table contains VLAN ID, multicast group MAC address and the
list of ports onto which the multicast data packets for group
should be forwarded. TabSnoopVlanMcastMacFwdEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.1.1 |
sysSnoopVlanMcastMacFwdInstIdInstance ID pertaining to the Multicast forwarding entry.
Currently only one instance is supported so it is always 1 Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.1.1.1 |
sysSnoopVlanMcastMacFwdVlanIdVLAN ID pertaining to the Multicast forwarding entry Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.1.1.2 |
sysSnoopVlanMcastMacFwdInetAddressTypeInetAddressType pertaining to the Multicast forwarding entry InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.1.1.3 |
sysSnoopVlanMcastMacFwdGroupAddressMulticast group MAC address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.1.1.4 |
sysSnoopVlanMcastMacFwdPortListList of ports onto which the multicast data
packets destined for this group will be forwarded.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.1.1.5 |
sysSnoopVlanRouterTableThis table contains the list of ports through which
a router, in a particular VLAN is reachable. SEQUENCE OF TabSnoopVlanRouterEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.3 |
sysSnoopVlanRouterEntryContains the VLAN ID and list of ports on which
routers are present in the VLAN. TabSnoopVlanRouterEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.3.1 |
sysSnoopVlanRouterInstIdInstance ID pertaining to the router port entry.
Currently only one instance is supported so it is always 1 Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.3.1.1 |
sysSnoopVlanRouterVlanIdVLAN ID of the ports through which router is reachable. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.3.1.2 |
sysSnoopVlanRouterInetAddressTypeIt indicates whether the row belongs to IGMP / MLD snooping. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.3.1.3 |
sysSnoopVlanRouterPortListList of ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.3.1.4 |
sysSnoopVlanFilterTableThis table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is
enabled in the system. SEQUENCE OF TabSnoopVlanFilterEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.4 |
sysSnoopVlanFilterEntryContains snooping status , version and fast leave
configuration for a specific VLAN. TabSnoopVlanFilterEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.4.1 |
sysSnoopVlanFilterInstIdInstance ID pertaining to VLAN filter table entry.
Currently only one instance is supported so it is always 1 Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.4.1.1 |
sysSnoopVlanFilterVlanIdVLAN ID for which snooping configuration is to be done. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.4.1.2 |
sysSnoopVlanFilterInetAddressTypeIndicates whether the row belongs to IGS/MLD snooping InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.4.1.3 |
sysSnoopVlanSnoopStatusEnables or disables IGS/MLDS on that specific VLANrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.4.1.4 |
sysSnoopVlanOperatingVersionIndicates the operating version of the IGS/MLDS switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 2 i.e, V2(2) or MLD version 1 i.e, V1(1)ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.4.1.5 |
sysSnoopVlanFastLeaveEnables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message the switch checks
if they are any interested receivers for the group by sending
a group specific query before removing the port from the
forwarding table. If set to 'enabled', the switch does not
send a group specific query and immediately removes the port
from the forwarding table.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.4.1.7 |
sysSnoopVlanQuerierIndicates whether the switch is configured as a querier in the VLANro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.4.1.8 |
sysSnoopVlanCfgQuerierThe snooping switch can be configured to send IGMP/MLD queries
when IGMP/MLD routers are not present in the VLAN. When set to
'enabled' the switch will generate general query messages.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.4.1.9 |
sysSnoopVlanQueryIntervalThis is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN. A switch should be configured as a querier for a VLAN
only when there are no queriers in the network.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.4.1.10 |
sysSnoopVlanRtrPortListList of ports which are configured statically as router portsrw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.4.1.11 |
sysSnoopVlanRowStatusThe status of a row in the VLAN filter table. By
'sysSnoopVlanRowStatus' new entries can be created in the VLAN
filter table and the existing entries can be removed from the
VLAN filter tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.3.4.1.12 |
sysSnoopStats OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.4 |
sysSnoopStatsTableThis table contains snooping statistics
maintained by the switch. The statistics are
maintained on a per VLAN basis. SEQUENCE OF TabSnoopStatsEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.4.1 |
sysSnoopStatsEntryContains snooping statistics for a particular VLAN. TabSnoopStatsEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.4.1.1 |
sysSnoopStatsInstIdInstance ID pertaining for the statistics entry.
Currently only one instance is supported so it is always 1 Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.4.1.1.1 |
sysSnoopStatsVlanIdVLAN ID for which snooping statistics are displayed Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.4.1.1.2 |
sysSnoopStatsInetAddressTypeIndicates whether the statistics are for IGS/MLDS InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.4.1.1.3 |
sysSnoopStatsRxGenQueriesProvides the statistics of General Queries received by the
snooping switch.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.4.1.1.4 |
sysSnoopStatsRxGrpQueriesProvides the statistics of Group Specific Queries received
by the snooping switch.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.4.1.1.5 |
sysSnoopStatsRxAsmReportsProvides the statistics of IGMPv1/IGMPv2 Membership reports
received by the snooping switch. In case of MLDS, it provides
the statistics of MLDv1 membership reports.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.4.1.1.7 |
sysSnoopStatsRxAsmLeavesProvides the statistics of IGMPv2/MLDv1 Leave messages
received by the snooping switch.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.4.1.1.15 |
sysSnoopStatsTxGenQueriesProvides the statistics of General Queries transmitted by the
snooping switch when it is act as a querier.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.4.1.1.16 |
sysSnoopStatsTxGrpQueriesProvides the statistics of Group Specific Queries transmitted
by the snooping switch.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.4.1.1.17 |
sysSnoopStatsTxAsmReportsProvides the statistics of IGMPv1/IGMPv2 Membership reports
transmitted by the snooping switch.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.4.1.1.18 |
sysSnoopStatsTxAsmLeavesProvides the statistics of IGMPv2/MLDv1 Leave messages
transmitted by the snooping switch.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.4.1.1.20 |
sysSnoopStatsDroppedPktsProvides the number of erroneous IGMP/MLD packets dropped
by the snooping switch due to failure in checksum
calculation.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.105.4.1.1.21 |
l2Bridge OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116 |
dot1dNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.0 |
newRootThe newRoot trap indicates that the sending agent
has become the new root of the Spanning Tree; the
trap is sent by a bridge soon after its election
as the new root, e.g., upon expiration of the
Topology Change Timer immediately subsequent to
its election. Implementation of this trap is
optional. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.0.1 |
topologyChangeA topologyChange trap is sent by a bridge when
any of its configured ports transitions from the
Learning state to the Forwarding state, or from
the Forwarding state to the Blocking state. The
trap is not sent if a newRoot trap is sent for the
same transition. Implementation of this trap is
optional. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.0.2 |
dot1dBase OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.1 |
dot1dBaseTableList of per Virtual Bridge Module Parameters. SEQUENCE OF TabDot1dBaseEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.1.1 |
dot1dBaseEntryVirtual Bridge Rst Module Parameters. TabDot1dBaseEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.1.1.1 |
dot1dBaseContextIdVirtual Bridge number Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.1.1.1.1 |
dot1dBaseBridgeAddressThe MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only required to be unique.
When concatenated with dot1dStpPriority a unique
BridgeIdentifier is formed which is used in the
Spanning Tree Protocol.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.1.1.1.2 |
dot1dBaseNumPortsThe number of ports controlled by this bridging entity.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.1.1.1.3 |
dot1dBaseTypeIndicates what type of bridging this bridge can
perform. If a bridge is actually performing a
certain type of bridging this will be indicated by
entries in the port table for the given type.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.1.1.1.4 |
dot1dBasePortTableA table that contains generic information about
every port that is associated with this bridge.
Transparent, source-route, and srt ports are
included. SEQUENCE OF TabDot1dBasePortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.1.2 |
dot1dBasePortEntryA list of information for each port of the
bridge. TabDot1dBasePortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.1.2.1 |
dot1dBasePortThe port number of the port for which this entry
contains bridge management information. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.1.2.1.1 |
dot1dBasePortIfIndexThe value of the instance of the ifIndex object,
defined in MIB-II, for the interface corresponding
to this port.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.1.2.1.2 |
dot1dBasePortCircuitFor a port which (potentially) has the same value
of dot1dBasePortIfIndex as another port on the
same bridge, this object contains the name of an
object instance unique to this port. For example,
in the case where multiple ports correspond one-
to-one with multiple X.25 virtual circuits, this
value might identify an (e.g., the first) object
instance associated with the X.25 virtual circuit
corresponding to this port.
For a port which has a unique value of
dot1dBasePortIfIndex, this object can have the
value { 0 0 }.ro OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.1.2.1.3 |
dot1dBasePortDelayExceededDiscardsThe number of frames discarded by this port due
to excessive transit delay through the bridge. It
is incremented by both transparent and source
route bridges.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.1.2.1.4 |
dot1dBasePortMtuExceededDiscardsThe number of frames discarded by this port due
to an excessive size. It is incremented by both
transparent and source route bridges.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.1.2.1.5 |
l2Dot1dStp OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2 |
dot1dStpTableTable of StpScalars per virtual bridge SEQUENCE OF TabDot1dStpEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1 |
dot1dStpEntryPer bridge StpScalars TabDot1dStpEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1.1 |
dot1dStpContextIdVirtual Bridge number Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1.1.1 |
dot1dStpProtocolSpecificationAn indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
enterprise versions of the IEEE Spanning Tree Protocol
are released that are incompatible with the
current version a new value will be defined.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1.1.2 |
dot1dStpPriorityThe value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
dot1dBaseBridgeAddress.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1.1.3 |
dot1dStpTimeSinceTopologyChangeThe time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1.1.4 |
dot1dStpTopChangesThe total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1.1.5 |
dot1dStpDesignatedRootThe bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1.1.6 |
dot1dStpRootCostThe cost of the path to the root as seen from
this bridge.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1.1.7 |
dot1dStpRootPortThe port number of the port which offers the
lowest cost path from this bridge to the root
bridge.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1.1.8 |
dot1dStpMaxAgeThe maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.ro Timeout .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1.1.9 |
dot1dStpHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.ro Timeout .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1.1.10 |
dot1dStpHoldTimeThis time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1.1.11 |
dot1dStpForwardDelayThis time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
dot1dStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]ro Timeout .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1.1.12 |
dot1dStpBridgeMaxAgeThe value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
dot1dStpBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1.1.13 |
dot1dStpBridgeHelloTimeThe value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds.rw Timeout .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1.1.14 |
dot1dStpBridgeForwardDelayThe value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
dot1dStpBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.1.1.15 |
dot1dStpPortTableA table that contains port-specific information
for the Spanning Tree Protocol. SEQUENCE OF TabDot1dStpPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.2 |
dot1dStpPortEntryA list of information maintained by every port
about the Spanning Tree Protocol state for that
port. TabDot1dStpPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.2.1 |
dot1dStpPortThe port number of the port for which this entry
contains Spanning Tree Protocol management
information. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.2.1.1 |
dot1dStpPortPriorityThe value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
dot1dStpPort.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.2.1.2 |
dot1dStpPortStateThe port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see dot1dStpPortEnable), this object
will have a value of disabled(1).ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.2.1.3 |
dot1dStpPortEnableThe enabled/disabled status of the port.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.2.1.4 |
dot1dStpPortPathCostThe contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.2.1.5 |
dot1dStpPortDesignatedRootThe unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.ro BridgeId .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.2.1.6 |
dot1dStpPortDesignatedCostThe path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.2.1.7 |
dot1dStpPortDesignatedBridgeThe Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.ro BridgeId .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.2.1.8 |
dot1dStpPortDesignatedPortThe Port Identifier of the port on the Designated
Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.2.1.9 |
dot1dStpPortForwardTransitionsThe number of times this port has transitioned
from the Learning state to the Forwarding state.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.2.1.10 |
dot1dStpExtTableTable of ExtStpScalars per Virtual Context. SEQUENCE OF TabDot1dStpExtEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.3 |
dot1dStpExtEntryPer Virtual Context Stp Scalars TabDot1dStpExtEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.3.1 |
dot1dStpVersionThe version of Spanning Tree Protocol the bridge is
currently running. The value 'stpCompatible(0)'
indicates the Spanning Tree Protocol specified in
IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning
Tree Protocol specified in IEEE 802.1w. New value may
be defined as future versions of the protocol become
available.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.3.1.1 |
dot1dStpTxHoldCountThe value used by the Port Transmit state machine to limit
the maximum transmission rate.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.3.1.2 |
dot1dStpPathCostDefaultThe version of the Spanning Tree default Path Costs that
are to be used by this Bridge. A value of 8021d1998(1)
uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998.
A value of stp8021t2001(2) uses the 32-bit default Path
Costs from IEEE Std. 802.1t.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.3.1.3 |
dot1dStpExtPortTableA table that contains port-specific Rapid Spanning Tree
information. SEQUENCE OF TabDot1dStpExtPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.4 |
dot1dStpExtPortEntryA list of Rapid Spanning Tree information maintained by
each port. TabDot1dStpExtPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.4.1 |
dot1dStpPortProtocolMigrationWhen operating in RSTP (version 2) mode, writing TRUE(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns FALSE(2) when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.4.1.1 |
dot1dStpPortAdminEdgePortThe administrative value of the Edge Port parameter. A
value of TRUE(1) indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port should be assumed as a non-edge-port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.4.1.2 |
dot1dStpPortOperEdgePortThe operational value of the Edge Port parameter. The
object is initialized to the value of
dot1dStpPortAdminEdgePort and is set FALSE on reception of
a BPDU.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.4.1.3 |
dot1dStpPortAdminPointToPointThe administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.4.1.4 |
dot1dStpPortOperPointToPointThe operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the dot1dStpPortAdminPointToPoint object.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.2.4.1.5 |
dot1dSr OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.3 |
dot1dTp OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4 |
dot1dTpTableTable of Tp per virtual bridge SEQUENCE OF TabDot1dTpEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.1 |
dot1dTpEntryPer bridge TpScalars TabDot1dTpEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.1.1 |
dot1dTpLearnedEntryDiscardsThe total number of Forwarding Database entries,
which have been or would have been learned, but
have been discarded due to a lack of space to
store them in the Forwarding Database. If this
counter is increasing, it indicates that the
Forwarding Database is regularly becoming full (a
condition which has unpleasant performance effects
on the subnetwork). If this counter has a
significant value but is not presently increasing,
it indicates that the problem has been occurring
but is not persistent.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.1.1.1 |
dot1dTpAgingTimeThe timeout period in seconds for aging out
dynamically learned forwarding information.
802.1D-1990 recommends a default of 300 seconds.rw INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.1.1.2 |
dot1dTpFdbTableA table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information. This information is used
by the transparent bridging function in
determining how to propagate a received frame. This
table maintains context ID as one more index to
support Multiple Instances. SEQUENCE OF TabDot1dTpFdbEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.2 |
dot1dTpFdbEntryInformation about a specific unicast MAC address
for which the bridge has some forwarding and/or
filtering information. TabDot1dTpFdbEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.2.1 |
dot1dTpFdbAddressA unicast MAC address for which the bridge has
forwarding and/or filtering information. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.2.1.1 |
dot1dTpFdbPortEither the value '0', or the port number of the
port on which a frame having a source address
equal to the value of the corresponding instance
of dot1dTpFdbAddress has been seen. A value of
'0' indicates that the port number has not been
learned but that the bridge does have some
forwarding/filtering information about this
address (e.g. in the dot1dStaticTable).
Implementors are encouraged to assign the port
value to this object whenever it is learned even
for addresses for which the corresponding value of
dot1dTpFdbStatus is not learned(3).ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.2.1.2 |
dot1dTpFdbStatusThe status of this entry. The meanings of the
values are:
other(1) : none of the following. This would
include the case where some other
MIB object (not the corresponding
instance of dot1dTpFdbPort, nor an
entry in the dot1dStaticTable) is
being used to determine if and how
frames addressed to the value of
the corresponding instance of
dot1dTpFdbAddress are being
forwarded.
invalid(2) : this entry is not longer valid
(e.g., it was learned but has since
aged-out), but has not yet been
flushed from the table.
learned(3) : the value of the corresponding
instance of dot1dTpFdbPort was
learned, and is being used.
self(4) : the value of the corresponding
instance of dot1dTpFdbAddress
represents one of the bridge's
addresses. The corresponding
instance of dot1dTpFdbPort
indicates which of the bridge's
ports has this address.
mgmt(5) : the value of the corresponding
instance of dot1dTpFdbAddress is
also the value of an existing
instance of dot1dStaticAddress.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.2.1.3 |
dot1dTpPortTableA table that contains information about every
port that is associated with this transparent
bridge. SEQUENCE OF TabDot1dTpPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.3 |
dot1dTpPortEntryA list of information for each port of a
transparent bridge. TabDot1dTpPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.3.1 |
dot1dTpPortThe port number of the port for which this entry
contains Transparent bridging management
information. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.3.1.1 |
dot1dTpPortMaxInfoThe maximum size of the INFO (non-MAC) field that
this port will receive or transmit.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.3.1.2 |
dot1dTpPortInFramesThe number of frames that have been received by
this port from its segment. Note that a frame
received on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function, including bridge management
frames.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.3.1.3 |
dot1dTpPortOutFramesThe number of frames that have been transmitted
by this port to its segment. Note that a frame
transmitted on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function, including bridge management
frames.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.3.1.4 |
dot1dTpPortInDiscardsCount of valid frames received which were
discarded (i.e., filtered) by the Forwarding
Process.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.3.1.5 |
dot1dTpHCPortTableA table that contains information about every high
capacity port that is associated with this transparent
bridge. SEQUENCE OF TabDot1dTpHCPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.5 |
dot1dTpHCPortEntryStatistics information for each high capacity port of a
transparent bridge. TabDot1dTpHCPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.5.1 |
dot1dTpHCPortInFramesThe number of frames that have been received by this
port from its segment. Note that a frame received on
the interface corresponding to this port is only counted
by this object if and only if it is for a protocol being
processed by the local bridging function, including
bridge management frames.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.5.1.1 |
dot1dTpHCPortOutFramesThe number of frames that have been transmitted by this
port to its segment. Note that a frame transmitted on
the interface corresponding to this port is only counted
by this object if and only if it is for a protocol being
processed by the local bridging function, including
bridge management frames.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.5.1.2 |
dot1dTpHCPortInDiscardsCount of valid frames that have been received by this
port from its segment which were discarded (i.e.,
filtered) by the Forwarding Process.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.5.1.3 |
dot1dTpPortOverflowTableA table that contains the most-significant bits of
statistics counters for ports that are associated with this
transparent bridge that are on high capacity interfaces, as
defined in the conformance clauses for this table. This table
is provided as a way to read 64-bit counters for agents which
support only SNMPv1.
Note that the reporting of most-significant and
least-significant counter bits separately runs the risk of
missing an overflow of the lower bits in the interval between
sampling. The manager must be aware of this possibility, even
within the same varbindlist, when interpreting the results of
a request or asynchronous notification. SEQUENCE OF TabDot1dTpPortOverflowEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.6 |
dot1dTpPortOverflowEntryThe most significant bits of statistics counters for a high
capacity interface of a transparent bridge. Each object is
associated with a corresponding object in dot1dTpPortTable
which indicates the least significant bits of the counter. TabDot1dTpPortOverflowEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.6.1 |
dot1dTpPortInOverflowFramesThe number of times the associated dot1dTpPortInFrames
counter has overflowed.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.6.1.1 |
dot1dTpPortOutOverflowFramesThe number of times the associated dot1dTpPortOutFrames
counter has overflowed.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.6.1.2 |
dot1dTpPortInOverflowDiscardsThe number of times the associated
dot1dTpPortInDiscards counter has overflowed.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.4.6.1.3 |
dot1dStatic OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.5 |
dot1dStaticTableA table containing filtering information
configured into the bridge by (local or network)
management specifying the set of ports to which
frames received from specific ports and containing
specific destination addresses are allowed to be
forwarded. The value of zero in this table as the
port number from which frames with a specific
destination address are received, is used to
specify all ports for which there is no specific
entry in this table for that particular
destination address. Entries are valid for
unicast and for group/broadcast addresses.This
table maintains context ID as one more index to
support Multiple Instances. SEQUENCE OF TabDot1dStaticEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.5.1 |
dot1dStaticEntryFiltering information configured into the bridge
by (local or network) management specifying the
set of ports to which frames received from a
specific port and containing a specific
destination address are allowed to be forwarded. TabDot1dStaticEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.5.1.1 |
dot1dStaticAddressThe destination MAC address in a frame to which
this entry's filtering information applies. This
object can take the value of a unicast address, a
group address or the broadcast address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.5.1.1.1 |
dot1dStaticReceivePortEither the value '0', or the port number of the
port from which a frame must be received in order
for this entry's filtering information to apply.
A value of zero indicates that this entry applies
on all ports of the bridge for which there is no
other applicable entry. INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.5.1.1.2 |
dot1dStaticRowStatusThis object indicates the status of the AllowedToGoTo
PortList to which a frame with a specific unicast
address will be flooded in the event that it has not
been learned. To fill the AllowedToGoTo portlist,
we have to set the rowstatus as 'NOT_IN_SERVICE' and
set the appropriate port in the
dot1dStaticAllowedToGoTable and set the rowstatus as
'ACTIVE' to make the portlist available.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.5.1.1.3 |
dot1dStaticStatusThis object indicates the status of this entry.
The default value is permanent(3).
other(1) - this entry is currently in use but
the conditions under which it will
remain so are different from each of the
following values.
invalid(2) - writing this value to the object
removes the corresponding entry.
permanent(3) - this entry is currently in use
and will remain so after the next reset
of the bridge.
deleteOnReset(4) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(5) - this entry is currently
in use and will remain so until it is
aged out.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.5.1.1.4 |
dot1dStaticAllowedToGoTableA table containing the information of AllowedToGoTo
ports for each static unicast entry. This table
maintains context ID as one more index to support
Multiple Instances. SEQUENCE OF TabDot1dStaticAllowedToGoEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.5.2 |
dot1dStaticAllowedToGoEntryInformation about a port, Whether it is an AllowedToGoTo
member or not. TabDot1dStaticAllowedToGoEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.5.2.1 |
dot1dStaticAllowedIsMemberIndicates whether the port is an allowedToGoTo member.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.5.2.1.1 |
dot1dPBridge OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6 |
dot1dMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1 |
dot1dExtBase OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.1 |
dot1dExtBaseTableList of dot1dExtBase group objects that can be configured per
virtual context in the system. SEQUENCE OF TabDot1dExtBaseEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.1.1 |
dot1dExtBaseEntrydot1dExtBase group objects per virtual context. TabDot1dExtBaseEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.1.1.1 |
dot1dBridgeContextIdIdentifies the virtual context. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.1.1.1.1 |
dot1dDeviceCapabilitiesIndicates the optional parts of IEEE 802.1D and 802.1Q
that are implemented by this device and are manageable
through this MIB. Capabilities that are allowed on a
per-port basis are indicated in dot1dPortCapabilities.ro Bits .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.1.1.1.2 |
dot1dTrafficClassesEnabledThe value true(1) indicates that Traffic Classes are
enabled on this bridge. When false(2), the bridge
operates with a single priority level for all traffic.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.1.1.1.3 |
dot1dGmrpStatusThe administrative status requested by management for
GMRP. The value enabled(1) indicates that GMRP should
be enabled on this device, in all VLANs, on all ports
for which it has not been specifically disabled. When
disabled(2), GMRP is disabled, in all VLANs and on all
ports, and all GMRP packets will be forwarded
transparently. This object affects both Applicant and
Registrar state machines. A transition from disabled(2)
to enabled(1) will cause a reset of all GMRP state
machines on all ports.
The value of this object MUST be retained across
reinitializations of the management system.rw EnabledStatus .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.1.1.1.4 |
dot1dPortCapabilitiesTableA table that contains capabilities information about
every port that is associated with this bridge. SEQUENCE OF TabDot1dPortCapabilitiesEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.1.2 |
dot1dPortCapabilitiesEntryA set of capabilities information about this port
indexed by dot1dBasePort. TabDot1dPortCapabilitiesEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.1.2.1 |
dot1dPortCapabilitiesIndicates the parts of IEEE 802.1D and 802.1Q that are
optional on a per-port basis that are implemented by
this device and are manageable through this MIB.ro Bits .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.1.2.1.1 |
dot1dPriority OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.2 |
dot1dPortPriorityTableA table that contains information about every port that
is associated with this transparent bridge. SEQUENCE OF TabDot1dPortPriorityEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.2.1 |
dot1dPortPriorityEntryA list of Default User Priorities for each port of a
transparent bridge. This is indexed by dot1dBasePort. TabDot1dPortPriorityEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.2.1.1 |
dot1dPortDefaultUserPriorityThe default ingress User Priority for this port. This
only has effect on media, such as Ethernet, that do not
support native User Priority.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.2.1.1.1 |
dot1dPortNumTrafficClassesThe number of egress traffic classes supported on this
port. This object may optionally be read-only.
The value of this object MUST be retained across
reinitializations of the management system.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.2.1.1.2 |
dot1dUserPriorityRegenTableA list of Regenerated User Priorities for each received
User Priority on each port of a bridge. The Regenerated
User Priority value may be used to index the Traffic
Class Table for each input port. This only has effect
on media that support native User Priority. The default
values for Regenerated User Priorities are the same as
the User Priorities. SEQUENCE OF Dot1dUserPriorityRegenEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.2.2 |
dot1dUserPriorityRegenEntryA mapping of incoming User Priority to a Regenerated
User Priority. Dot1dUserPriorityRegenEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.2.2.1 |
dot1dUserPriorityThe User Priority for a frame received on this port. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.2.2.1.1 |
dot1dRegenUserPriorityThe Regenerated User Priority that the incoming User
Priority is mapped to for this port.
The value of this object MUST be retained across
reinitializations of the management system.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.2.2.1.2 |
dot1dTrafficClassTableA table mapping evaluated User Priority to Traffic
Class, for forwarding by the bridge. Traffic class is a
number in the range (0..(dot1dPortNumTrafficClasses-1)). SEQUENCE OF TabDot1dTrafficClassEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.2.3 |
dot1dTrafficClassEntryUser Priority to Traffic Class mapping. TabDot1dTrafficClassEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.2.3.1 |
dot1dTrafficClassPriorityThe Priority value determined for the received frame.
This value is equivalent to the priority indicated in
the tagged frame received, or one of the evaluated
priorities, determined according to the media-type.
For untagged frames received from Ethernet media, this
value is equal to the dot1dPortDefaultUserPriority value
for the ingress port.
For untagged frames received from non-Ethernet media,
this value is equal to the dot1dRegenUserPriority value
for the ingress port and media-specific user priority. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.2.3.1.1 |
dot1dTrafficClassThe Traffic Class the received frame is mapped to.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.2.3.1.2 |
dot1dPortOutboundAccessPriorityTableA table mapping Regenerated User Priority to Outbound
Access Priority. This is a fixed mapping for all port
types, with two options for 802.5 Token Ring. SEQUENCE OF Dot1dPortOutboundAccessPriorityEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.2.4 |
dot1dPortOutboundAccessPriorityEntryRegenerated User Priority to Outbound Access Priority
mapping. Dot1dPortOutboundAccessPriorityEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.2.4.1 |
dot1dPortOutboundAccessPriorityThe Outbound Access Priority the received frame is
mapped to.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.2.4.1.1 |
dot1dGarp OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.3 |
dot1dPortGarpTableA table of GARP control information about every bridge
port. This is indexed by dot1dBasePort. SEQUENCE OF TabDot1dPortGarpEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.3.1 |
dot1dPortGarpEntryGARP control information for a bridge port. TabDot1dPortGarpEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.3.1.1 |
dot1dPortGarpJoinTimeThe GARP Join time, in centiseconds.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.3.1.1.1 |
dot1dPortGarpLeaveTimeThe GARP Leave time, in centiseconds.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.3.1.1.2 |
dot1dPortGarpLeaveAllTimeThe GARP LeaveAll time, in centiseconds.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.1.3.1.1.3 |
dot1dConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.2 |
dot1dGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.2.1 |
dot1dCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.6.2.2 |
dot1qQBridge OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7 |
dot1qMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1 |
dot1qBase OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.1 |
dot1qBaseTableList of dot1qBase objects that can be configured per
virtual context in the system. SEQUENCE OF TabDot1qBaseEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.1.1 |
dot1qBaseEntryVirtual context dot1qBase objects. TabDot1qBaseEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.1.1.1 |
dot1qVlanContextIdIdentifies a virtual context. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.1.1.1.1 |
dot1qVlanVersionNumberThe version number of IEEE 802.1Q that this device
supports.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.1.1.1.2 |
dot1qMaxVlanIdThe maximum IEEE 802.1Q VLAN ID that this device
supports.ro VlanId .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.1.1.1.3 |
dot1qMaxSupportedVlansThe maximum number of IEEE 802.1Q VLANs that this
device supports.ro Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.1.1.1.4 |
dot1qNumVlansThe current number of IEEE 802.1Q VLANs that are
configured in this device.ro Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.1.1.1.5 |
dot1qGvrpStatusThe administrative status requested by management for
GVRP. The value enabled(1) indicates that GVRP should
be enabled on this device, on all ports for which it has
not been specifically disabled. When disabled(2), GVRP
is disabled on all ports and all GVRP packets will be
forwarded transparently. This object affects all GVRP
Applicant and Registrar state machines. A transition
from disabled(2) to enabled(1) will cause a reset of all
GVRP state machines on all ports.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.1.1.1.6 |
dot1qTp OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.2 |
dot1qFdbTableA table that contains configuration and control
information for each Filtering Database currently
operating on this device. Entries in this table appear
automatically when VLANs are assigned FDB IDs in the
dot1qVlanCurrentTable. This table maintains context ID
as one more index to support Multiple Instances. SEQUENCE OF TabDot1qFdbEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.2.1 |
dot1qFdbEntryInformation about a specific Filtering Database. TabDot1qFdbEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.2.1.1 |
dot1qFdbIdThe identity of this Filtering Database. Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.2.1.1.1 |
dot1qFdbDynamicCountThe current number of dynamic entries in this
Filtering Database.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.2.1.1.2 |
dot1qTpFdbTableA table that contains information about unicast entries
for which the device has forwarding and/or filtering
information. This information is used by the
transparent bridging function in determining how to
propagate a received frame. This table maintains context ID
as one more index to support Multiple Instances. SEQUENCE OF TabDot1qTpFdbEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.2.2 |
dot1qTpFdbEntryInformation about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information. TabDot1qTpFdbEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.2.2.1 |
dot1qTpFdbAddressA unicast MAC address for which the device has
forwarding and/or filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.2.2.1.1 |
dot1qTpFdbPortEither the value '0', or the port number of the port on
which a frame having a source address equal to the value
of the corresponding instance of dot1qTpFdbAddress has
been seen. A value of '0' indicates that the port
number has not been learned but that the device does
have some forwarding/filtering information about this
address (e.g. in the dot1qStaticUnicastTable).
Implementors are encouraged to assign the port value to
this object whenever it is learned even for addresses
for which the corresponding value of dot1qTpFdbStatus is
not learned(3).ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.2.2.1.2 |
dot1qTpFdbStatusThe status of this entry. The meanings of the values
are:
other(1) - none of the following. This may include
the case where some other MIB object (not the
corresponding instance of dot1qTpFdbPort, nor an
entry in the dot1qStaticUnicastTable) is being
used to determine if and how frames addressed to
the value of the corresponding instance of
dot1qTpFdbAddress are being forwarded.
invalid(2) - this entry is no longer valid (e.g., it
was learned but has since aged out), but has not
yet been flushed from the table.
learned(3) - the value of the corresponding instance
of dot1qTpFdbPort was learned and is being used.
self(4) - the value of the corresponding instance of
dot1qTpFdbAddress represents one of the device's
addresses. The corresponding instance of
dot1qTpFdbPort indicates which of the device's
ports has this address.
mgmt(5) - the value of the corresponding instance of
dot1qTpFdbAddress is also the value of an
existing instance of dot1qStaticAddress.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.2.2.1.3 |
dot1qTpFdbPwEither the value '0', or the pseudowire number on
which a frame having a source address equal to the value
of the corresponding instance of dot1qTpFdbAddress has
been seen. A value of '0' indicates that the entry was
learned via the layer2 port. Non-zero value indicates
that this value must be used for forwading irrespective
of dot1qTpFdbPortro Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.2.2.1.4 |
dot1qStatic OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3 |
dot1qStaticUnicastTableA table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded. A
value of zero in this table as the port number from
which frames with a specific destination address are
received, is used to specify all ports for which there
is no specific entry in this table for that particular
destination address. Entries are valid for unicast
addresses only. This table maintains context ID as
one more index to support Multiple Instances. SEQUENCE OF TabDot1qStaticUnicastEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.1 |
dot1qStaticUnicastEntryFiltering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allowed to be forwarded. TabDot1qStaticUnicastEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.1.1 |
dot1qStaticUnicastAddressThe destination MAC address in a frame to which this
entry's filtering information applies. This object must
take the value of a unicast address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.1.1.1 |
dot1qStaticUnicastReceivePortEither the value '0', or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of zero
indicates that this entry applies on all ports of the
device for which there is no other applicable entry.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.1.1.2 |
dot1qStaticUnicastRowStatusThis object indicates the status of the AllowedToGoTo
PortList to which a frame with a specific unicast
address will be flooded in the event that it has not
been learned. To fill the AllowedToGoTo portlist,
we have to set the rowstatus as 'NOT_IN_SERVICE' and
set the appropriate port in the
dot1qStaticAllowedToGoTable and set the rowstatus as
'ACTIVE' to make the portlist available.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.1.1.3 |
dot1qStaticUnicastStatusThis object indicates the status of this entry.
other(1) - this entry is currently in use but
the conditions under which it will remain
so differ from the following values.
invalid(2) - writing this value to the object
removes the corresponding entry.
permanent(3) - this entry is currently in use
and will remain so after the next reset of
the bridge.
deleteOnReset(4) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(5) - this entry is currently in
use and will remain so until it is aged out.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.1.1.4 |
dot1qStaticAllowedToGoTableA table containing the information of AllowedToGoTo
ports for each static unicast entry. This table
maintains context ID as one more index to support
Multiple Instances. SEQUENCE OF TabDot1qStaticAllowedToGoEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.2 |
dot1qStaticAllowedToGoEntryInformation about a port, Whether it is an AllowedToGoTo
member or not. TabDot1qStaticAllowedToGoEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.2.1 |
dot1qStaticAllowedIsMemberIndicates whether the port is an allowedToGoTo member.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.2.1.1 |
dot1qTpPortThe port number of the port for which this entry applies. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.2.1.2 |
dot1qStaticMulticastTableA table containing filtering information for Multicast
and Broadcast MAC addresses for each VLAN, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific Multicast
and Broadcast destination addresses are allowed to be
forwarded. A value of zero in this table as the port
number from which frames with a specific destination
address are received, is used to specify all ports for
which there is no specific entry in this table for that
particular destination address. Entries are valid for
Multicast and Broadcast addresses only. This table
maintains context ID as one more index to support
Multiple Instances. SEQUENCE OF TabDot1qStaticMulticastEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.3 |
dot1qStaticMulticastEntryFiltering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from this specific port
for this VLAN and containing this Multicast or Broadcast
destination address are allowed to be forwarded. TabDot1qStaticMulticastEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.3.1 |
dot1qStaticMulticastAddressThe destination MAC address in a frame to which this
entry's filtering information applies. This object must
take the value of a Multicast or Broadcast address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.3.1.1 |
dot1qStaticMulticastReceivePortEither the value '0', or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of zero
indicates that this entry applies on all ports of the
device for which there is no other applicable entry.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.3.1.2 |
dot1qStaticMulticastRowStatusThis object indicates the status of the PortLists
(Eggress, Forbidden) used in the static multicast
table. To fill the eggress and forbidden portlist,
we have to set the rowstatus as 'NOT_IN_SERVICE'
and set the appropriate port in the
dot1qForwardUnregPortConfigTable and set the
rowstatus as 'ACTIVE' to make the portlist available.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.3.1.3 |
dot1qStaticMulticastStatusThis object indicates the status of this entry.
other(1) - this entry is currently in use but
the conditions under which it will remain
so differ from the following values.
invalid(2) - writing this value to the object
removes the corresponding entry.
permanent(3) - this entry is currently in use
and will remain so after the next reset of
the bridge.
deleteOnReset(4) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(5) - this entry is currently in
use and will remain so until it is aged out.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.3.1.4 |
dot1qStaticMcastPortTableA table containing egress and forbidden ports for
static multicast entry. This table maintains context
ID as one more index to support Multiple Instance. SEQUENCE OF TabDot1qStaticMcastPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.4 |
dot1qStaticMcastPortEntryInformation about a port, Whether it is a member or
a forbidden member. TabDot1qStaticMcastPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.4.1 |
dot1qStaticMcastPortIndicates whether the port is a member or a forbidden
member in the static multicast entry.
'addMember' - to add the port in the egress
member-list.
'addForbidden' - to add the port in the forbidden
member-list.
'delMember' - to remove the port from the egress
member-list.
'delForbidden' - to remove the port from the forbidden
member-list.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.4.1.1 |
dot1qVlanIndexThe VLAN-ID or other identifier referring to this VLAN. VlanIndex .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.3.4.1.2 |
dot1qVlan OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4 |
dot1qVlanNumDeletesTableTable containing number of VLAN deletions in the VLAN
current database. This table maintains context ID as index
to support Multiple Instances. SEQUENCE OF TabDot1qVlanNumDeletesEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.1 |
dot1qVlanNumDeletesEntryEntry for a virtual context. TabDot1qVlanNumDeletesEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.1.1 |
dot1qVlanNumDeletesThe number of times a VLAN entry has been deleted from
the dot1qVlanCurrentTable (for any reason). If an entry
is deleted, then inserted, and then deleted, this
counter will be incremented by 2.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.1.1.1 |
dot1qVlanCurrentTableA table containing current configuration information
for each VLAN currently configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received. This table
maintains context ID as one more index to support
Multiple Instances. SEQUENCE OF TabDot1qVlanCurrentEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.2 |
dot1qVlanCurrentEntryInformation for a VLAN configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received. TabDot1qVlanCurrentEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.2.1 |
dot1qVlanTimeMarkA TimeFilter for this entry. See the TimeFilter
textual convention to see how this works. TimeFilter (RMON2-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.2.1.1 |
dot1qVlanFdbIdThe Filtering Database used by this VLAN. This is one
of the dot1qFdbId values in the dot1qFdbTable. This
value is allocated automatically by the device whenever
the VLAN is created: either dynamically by GVRP, or by
management, in dot1qVlanStaticTable. Allocation of this
value follows the learning constraints defined for this
VLAN in dot1qLearningConstraintsTable.ro Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.2.1.2 |
dot1qVlanStatusThis object indicates the status of this entry.
other(1) - this entry is currently in use but the
conditions under which it will remain so differ
from the following values.
permanent(2) - this entry, corresponding to an entry
in dot1qVlanStaticTable, is currently in use and
will remain so after the next reset of the
device. The port lists for this entry include
ports from the equivalent dot1qVlanStaticTable
entry and ports learnt dynamically.
dynamicGvrp(3) - this entry is currently in use
and will remain so until removed by GVRP. There
is no static entry for this VLAN and it will be
removed when the last port leaves the VLAN.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.2.1.3 |
dot1qVlanCreationTimeThe value of sysUpTime when this VLAN was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.2.1.4 |
dot1qVlanEgressPortTableA table containing the information of egress ports
for each VLAN. This table maintains context ID as
one more index to support Multiple Instance. SEQUENCE OF TabDot1qVlanEgressPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.3 |
dot1qVlanEgressPortEntryInformation about a port, Whether it is a tagged
or an untagged member. TabDot1qVlanEgressPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.3.1 |
dot1qVlanCurrentEgressPortIndicates whether the port is a tagged or a untagged
member in the VLAN.
'tagged' - to add the port in the tagged portlist.
'untagged' - to add the port in the untagged portlist.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.3.1.1 |
dot1qVlanStaticTableA table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset. This table
maintains context ID as one more index to support
Multiple Instance. SEQUENCE OF TabDot1qVlanStaticEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.4 |
dot1qVlanStaticEntryStatic information for a VLAN configured into the
device by (local or network) management. TabDot1qVlanStaticEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.4.1 |
dot1qVlanStaticNameAn administratively assigned string, which may be used
to identify the VLAN.rw SnmpAdminString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.4.1.1 |
dot1qVlanStaticRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.4.1.2 |
dot1qVlanStaticPortConfigTableA table containing the information of tagged, untagged
and forbidden ports for each VLAN. This table
maintains context ID as one more index to support
Multiple Instance. SEQUENCE OF TabDot1qVlanStaticPortConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.5 |
dot1qVlanStaticPortConfigEntryForwarding information about a port, Whether it is a
member or a forbidden member. TabDot1qVlanStaticPortConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.5.1 |
dot1qVlanStaticPortIndicates whether the port is a member or a forbidden
member in the forwarding information for this VLAN.
'addTagged' - to add the port in the tagged portlist.
'addUntagged' - to add the port in the untagged portlist.
'addForbidden' - to add the port in the forbidden portlist.
'delTagged' - to delete the port from the tagged portlist.
'delUntagged' - to delete the port from the untagged portlist.
'delForbidden' - to delete the port from the forbidden portlist.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.5.1.1 |
dot1qPortVlanTableA table containing per port control and status
information for VLAN configuration in the device. SEQUENCE OF TabDot1qPortVlanEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.7 |
dot1qPortVlanEntryInformation controlling VLAN configuration for a port
on the device. This is indexed by dot1dBasePort. TabDot1qPortVlanEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.7.1 |
dot1qPvidThe PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on this port.rw VlanIndex .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.7.1.1 |
dot1qPortAcceptableFrameTypesWhen this is admitOnlyVlanTagged(2) the device will
discard untagged frames or Priority-Tagged frames
received on this port. When admitAll(1), untagged
frames or Priority-Tagged frames received on this port
will be accepted and assigned to the PVID for this port.
When this is admitOnlyUntaggedAndPriorityTagged the device
will recieve only untagged and priority tagged frames on
this port.
This control does not affect VLAN independent BPDU
frames, such as GVRP and STP. It does affect VLAN
dependent BPDU frames, such as GMRP.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.7.1.2 |
dot1qPortIngressFilteringWhen this is true(1) the device will discard incoming
frames for VLANs which do not include this Port in its
Member set. When false(2), the port will accept all
incoming frames.
This control does not affect VLAN independent BPDU
frames, such as GVRP and STP. It does affect VLAN
dependent BPDU frames, such as GMRP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.7.1.3 |
dot1qPortGvrpStatusThe state of GVRP operation on this port. The value
enabled(1) indicates that GVRP is enabled on this port,
as long as dot1qGvrpStatus is also enabled for this
device. When disabled(2) but dot1qGvrpStatus is still
enabled for the device, GVRP is disabled on this port:
any GVRP packets received will be silently discarded and
no GVRP registrations will be propagated from other
ports. This object affects all GVRP Applicant and
Registrar state machines on this port. A transition
from disabled(2) to enabled(1) will cause a reset of all
GVRP state machines on this port.rw EnabledStatus .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.7.1.4 |
dot1qPortGvrpFailedRegistrationsThe total number of failed GVRP registrations, for any
reason, on this port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.7.1.5 |
dot1qPortGvrpLastPduOriginThe Source MAC Address of the last GVRP message
received on this port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.7.1.6 |
dot1qPortRestrictedVlanRegistrationThe state of Restricted VLAN Registration on this port.
If the value of this control is true(1), then creation
of a new dynamic VLAN entry is permitted only if there
is a Static VLAN Registration Entry for the VLAN concerned,
in which the Registrar Administrative Control value for
this port is Normal Registration.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.116.7.1.4.7.1.7 |
l2Mst OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118 |
dot1sMst OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1 |
dot1sMstTableList of per Virtual Context Mst Module Parameters. SEQUENCE OF TabDot1sMstEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3 |
dot1sMstEntryVirtual Context Mst Module Parameters. TabDot1sMstEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1 |
dot1sMstContextIdIdentifies the Virtual Context. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.1 |
dot1sSystemControlThe administrative shutdown status requested by management for the MST
feature. The value start (1) indicates that MST should be active in
the device on all ports. The value shutdown (2) indicates that MST
should be shutdown in the device on all ports. All memory should
be released on all ports.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.2 |
dot1sModuleStatusThe administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabled in the device on all ports. The object can
be set to enabled(1) if and only if, dot1sSystemControl set to start.rw EnabledStatus .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.3 |
dot1sMaxMstInstanceNumberThe Maximun number of spanning trees to be allowed.
A User may limit the Number of Spanning Tree instance
to be allowed in the Bridge.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.4 |
dot1sNoOfMstiSupportedIndicates Maximum number of spanning tree Instances supported.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.5 |
dot1sMaxHopCountIndicates the Maximum Hop Count value.
The granularity of this timer is specified
to be 1 second. An agent may return a badValue
error if a set is attempted to a value which is
not a whole number of seconds.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.6 |
dot1sBrgAddressThe MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only required to be unique.
When concatenated with dot1sCistBridgePriority or
dot1sMstiBridgePriority a unique BridgeIdentifier
is formed which is used in the Spanning Tree Protocol.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.7 |
dot1sCistRootThe bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.8 |
dot1sCistRegionalRootThe bridge identifier of the Root of the Multiple
spanning tree region as determined by the Spanning Tree
Protocol as executed by this node. This value is used as
the CIST Regional Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.9 |
dot1sCistRootCostThe Cost of the path to the CIST Root as seen
from this bridge.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.10 |
dot1sCistRegionalRootCostThe Cost of the path to the CIST Regional Root
as seen from this bridge.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.11 |
dot1sCistRootPortThe Port Number of the Port which offers the lowest
path cost from this bridge to the CIST Root Bridge.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.12 |
dot1sCistBridgePriorityThe Value of the writable portion of the Bridge
Identifier comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.13 |
dot1sCistBridgeMaxAgeThe value that all bridges use for MaxAge when
this bridge is acting as the root. The granularity
of this timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.14 |
dot1sCistBridgeForwardDelayThe value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D specifies that the range for this
parameter is related to the value of
BridgeMaxAge. The granularity of this
timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.15 |
dot1sCistHoldTimeThis time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.16 |
dot1sCistMaxAgeThe maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.ro Timeout .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.17 |
dot1sCistForwardDelayThis time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in a particular state before moving to the
next state.ro Timeout .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.18 |
dot1sMstpUpCountThe number of times MSTP Module has been enabled.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.19 |
dot1sMstpDownCountThe number of times MSTP Module has been disabled.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.20 |
dot1sPathCostDefaultTypeThe version of the Spanning Tree default Path Costs that
are to be used by this Bridge. A value of 8021d1998(1)
uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998.
A value of stp8021t2001(2) uses the 32-bit default Path
Costs from IEEE Std. 802.1t.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.21 |
dot1sTraceThis object is used to enable Trace Statements in the MSTP
Module.
A FOUR BYTE integer is used for enabling the level of tracing.
Each BIT in the four byte integer, represents a particular
level of Trace.
The mapping between the bit positions & the level of trace is
as follows:
0 - Init and Shutdown Traces
1 - Management Traces
2 - Data Path Traces
3 - Control Plane Traces
4 - Packet Dump Traces
5 - Traces related to All Resources except Buffers
6 - All Failure Traces
7 - Buffer Traces
The remaining bits are unused. Combination of trace levels are
also allowed.
For example if the bits 0 and 1 are set, then the Trace
statements related to Init-Shutdown and management
will be printed.
The user has to enter the corresponding INTEGER VALUE for the
bits set. For example if bits 0 and 1 are to be set then user has
to give the value for this object as 3.
Setting the Trace Option to any value will cause the Debug Option
to be set to 0 (i.e.) the Trace Option and Debug Option are mutually
exclusive.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.22 |
dot1sDebugThis object is used to enable Debug Statements in the MSTP
Module.
A FOUR BYTE integer is used for enabling the level of debugging.
Each BIT in the four byte integer, represents a particular
level of Debug.
The mapping between the bit positions & the level of debug is
as follows:
0 - Init and Shutdown Debug statements
1 - Management Debug statements
2 - Memory related Debug statements
3 - BPDU related Debug statements
4 - Event Handling Debug statements
5 - Timer Module Debug statements
6 - Port Information SEM Debug statements
7 - Port Receive SEM Debug statements (valid in the case of MSTP alone)
8 - Role Selection SEM Debug statements
9 - Role Transition SEM Debug statements
10 - State Transition SEM Debug statements
11 - Protocol Migration SEM Debug statements
12 - Topology Change SEM Debug statements
13 - Port Transmit SEM Debug statements
14 - Bridge Detection SEM Debug statements
15 - All Failure Debug statements
16 - Redundancy code flow Debug statements
The remaining bits are unused. Combination of debug levels are
also allowed.
For example if the bits 0 and 1 are set, then the Debug
statements related to Init-Shutdown and management
will be printed.
The user has to enter the corresponding INTEGER VALUE for the
bits set. For example if bits 0 and 1 are to be set then user has
to give the value for this object as 3.
Setting the Debug Option to any value will cause the Trace Option
to be set to 0 (i.e.) the Trace Option and Debug Option are mutually
exclusive.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.23 |
dot1sForceProtocolVersionThe version of Spanning Tree Protocol the bridge is
currently running. The value 'stpCompatible(0)'
indicates the Spanning Tree Protocol specified in
IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning
Tree Protocol specified in IEEE 802.1w and 'mstp(3)'
indicates the Multiple Spanning Tree Protocol Specified
in IEEE 802.1s.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.24 |
dot1sTxHoldCountThe value used by the Port Transmit state machine to limit
the maximum transmission rate.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.25 |
dot1sMstiConfigIdSelThe Configuration Identifier Format Selector used
by the Bridge. This has a fixed value of 0 to indicate
RegionName, RegionVersion are specified as in Standard.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.26 |
dot1sMstiRegionNameThe Name for the Region's configuration. By Default
Region Name will be equal to the Bridge Mac Address.rw OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.27 |
dot1sMstiRegionVersionVersion of the MST Region.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.28 |
dot1sMstiConfigDigestThe Configuration Digest value for this Region.ro OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.29 |
dot1sBufferOverFlowCountThe number of times Buffer overflows/failures have occured.
A Trap is generated on the occurence of this event.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.30 |
dot1sMemAllocFailureCountThe number of times memory allocation failures have occured.
A Trap is generated on the occurence of this event.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.31 |
dot1sRegionConfigChangeCountThe number of times a Region Configuration Identifier Change
was detected.
A Trap is generated on the occurence of this event.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.32 |
dot1sCistBridgeRoleSelectionSemStateCurrent state of the Port Role Selection State Machine
of this bridge in Common Spanning Tree contextro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.33 |
dot1sCistTimeSinceTopologyChangeThe time (in hundredths of a second) since the
TcWhile Timer for any port in this Bridge was
non-zero for Common Spanning Tree context.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.34 |
dot1sCistTopChangesThe number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for Common
Spanning Tree context.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.35 |
dot1sCistNewRootBridgeCountThe number of times this Bridge has detected a Root
Bridge change for Common Spanning Tree context.
A Trap is generated on the occurence of this event.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.36 |
dot1sCistHelloTimeThis time value, measured in units of hundredths
of a second, specifies the amount of time between
the transmission of configuration BPDUs by this node
on any port when it is the root of the spanning tree
or trying to become so.ro Timeout .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.37 |
dot1sCistBridgeHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second.rw Timeout .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.38 |
dot1sCistDynamicPathcostCalculationThis object is used to determine whether dynamic pathcost
calculation is allowed or not.The value is determined by
management. If set to true, pathcost is calculated dynamically
from port speed, otherwise the link speed at the time of port
creation is used for calculating the path cost. In both cases
if the user has configured a pathcost for the port that will be
used. By default dynamic pathcost calculation is set to false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.39 |
dot1sContextNameThis object is used to identity the context-name.ro DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.3.1.40 |
dot1sMstiBridgeTableTable containing Bridge Information specific to Spanning
Tree Instance. This table maintains context ID as one
more index to support Multiple Instances. SEQUENCE OF TabDot1sMstiBridgeEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.4 |
dot1sMstiBridgeEntryEntry indicating the Bridge Information. TabDot1sMstiBridgeEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.4.1 |
dot1sMstiInstanceIndexSpanning Tree Instance to which the information belongs. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.4.1.1 |
dot1sMstiBridgeRegionalRootMSTI Regional Root Identifier value for the Instance. This value
is used as the MSTI Regional Root Identifier parameter in all
Configuration Bridge PDUs originated by this nodero BridgeId .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.4.1.2 |
dot1sMstiBridgePriorityThe writable portion of the MSTI Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.4.1.3 |
dot1sMstiRootCostThe Cost of the path to the MSTI Regional Root as seen
by this bridge.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.4.1.4 |
dot1sMstiRootPortThe Port Number of the Port which offers the lowest
path cost from this bridge to the MSTI Region Root Bridge.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.4.1.5 |
dot1sMstiTimeSinceTopologyChangeThe time (in hundredths of a second) since the
TcWhile Timer for any port in this Bridge was
non-zero for this spanning tree instance.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.4.1.6 |
dot1sMstiTopChangesThe number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for this
spanning tree instance.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.4.1.7 |
dot1sMstiNewRootBridgeCountThe number of times this Bridge has detected a Root
Bridge change for this spanning tree instance.
A Trap is generated on the occurence of this event.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.4.1.8 |
dot1sMstiBridgeRoleSelectionSemStateCurrent state of the Port Role Selection State Machine
for this spanning tree instance for this bridge.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.4.1.9 |
dot1sInstanceUpCountThe number of times a new spanning tree instance has
been created.
A Trap is generated on the occurence of this event.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.4.1.10 |
dot1sInstanceDownCountThe number of times a spanning tree instance has
been deleted.
A Trap is generated on the occurence of this event.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.4.1.11 |
dot1sOldDesignatedRootThe bridge identifier of the old root of the spanning
tree instance as determined by the Spanning Tree Protocol
as executed by this node.ro BridgeId .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.4.1.12 |
dot1sVlanInstanceMappingTableThis table contains one entry for each instance of MSTP.
This table maintains context ID as one more index to
support Multiple Instances. SEQUENCE OF TabDot1sVlanInstanceMappingEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.5 |
dot1sVlanInstanceMappingEntryA conceptual row containing the status of the MSTP instance. TabDot1sVlanInstanceMappingEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.5.1 |
dot1sInstanceIndexAn arbitrary integer within the range from 1 to the value of
Max Instance Number that uniquely identifies an instance. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.5.1.1 |
dot1sMapVlanIndexThe VlanId will get mapped to the spanning tree instance
specified. All the Instance Specific information for the
Member ports of the Vlan will be created.This object is
used only for SET operation.GET Operation returns null values.
If the VlanId to Instance Mapping has to be known then any
one of the VlanMapped object should be used.rw VlanId .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.5.1.2 |
dot1sUnMapVlanIndexThe VlanId will get unmapped from spanning tree instance
to which it it mapped. All the Instance Specific information
for the Member ports of the Vlan will get released.This object
is used only for SET operation.GET Operation returns null values.rw VlanId .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.5.1.3 |
dot1sSetVlanListA string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to map for this
Instance. If the VlanId to Instance Mapping has to be known
then any one of the VlanMapped object should be used.If a
vlan is already mapped to this Instance, it may not be mapped
again. This object is used only for SET operation.
GET Operation returns null values.rw OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.5.1.4 |
dot1sResetVlanListA string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to unmap from this
Instance. A vlan may not be unmapped from this instance if
it is not already mapped to this Instance. This object is
used only for SET operation.GET Operation returns null values.rw OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.5.1.5 |
dot1sInstanceVlanMappedA string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.ro OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.5.1.6 |
dot1sInstanceVlanMapped2kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095.ro OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.5.1.7 |
dot1sInstanceVlanMapped3kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095.ro OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.5.1.8 |
dot1sInstanceVlanMapped4kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095.ro OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.5.1.9 |
dot1sCistPortTableThis table contains Common Spanning Tree Port
Information. SEQUENCE OF TabDot1sCistPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6 |
dot1sCistPortEntryA list of information maintained by every port for
Common Spanning tree. TabDot1sCistPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1 |
dot1sCistPortThe Port number of the port for which this entry contains
spanning tree information. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.1 |
dot1sCistPortPathCostThe contribution of this port to the path cost of
paths towards the CIST Root which include this port.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.2 |
dot1sCistPortPriorityThe four most significant bits of the Port Identifier
of the Spanning Tree instance can be modified by setting
the CistPortPriority value. The values that are set for Port
Priority must be in steps of 16.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.3 |
dot1sCistPortDesignatedRootThe unique Bridge Identifier of the bridge recorded as the
CIST Root in the configuration BPDUs transmitted.ro BridgeId .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.4 |
dot1sCistPortDesignatedBridgeThe unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment.ro BridgeId .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.5 |
dot1sCistPortDesignatedPortThe Port identifier of the port on the Designated Bridge
for this port's segment.ro OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.6 |
dot1sCistPortAdminP2PThe administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.7 |
dot1sCistPortOperP2PThe operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the dot1sCistPortAdminP2P object.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.8 |
dot1sCistPortAdminEdgeStatusThe administrative value of the Edge Port parameter. A
value of TRUE(1) indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port should be assumed as a non-edge-port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.9 |
dot1sCistPortOperEdgeStatusThe operational value of the Edge Port parameter. The
object is initialized to the value of
dot1sCistPortAdminEdgeStatus and is set FALSE on reception
of a BPDU.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.10 |
dot1sCistPortProtocolMigrationIndicates the Protocol migration state of this Port.
When operating in RSTP/MSTP (version >= 2) mode, writing
TRUE(1) to this object forces this port to transmit MSTP
BPDUs without instance information.
Any other operation on this object has no effect and
it always returns FALSE(2) when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.11 |
dot1sCistPortStateCurrent state of the Port as defined by the Common
spanning tree protocol.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.12 |
dot1sCistForcePortStateCurrent state of the Port which can be changed to either
Disabled or Enabled for ALL spanning tree
instances. Setting this object will override the port's
status in any of the MSTI contextsrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.13 |
dot1sCistPortForwardTransitionsNumber of times this port has transitioned to the
Forwarding State.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.14 |
dot1sCistPortRxMstBpduCountNumber of MST BPDUs received on this port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.15 |
dot1sCistPortRxRstBpduCountNumber of RST BPDUs received on this port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.16 |
dot1sCistPortRxConfigBpduCountNumber of Configuration BPDUs received on this port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.17 |
dot1sCistPortRxTcnBpduCountNumber of TCN BPDUs received on this port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.18 |
dot1sCistPortTxMstBpduCountNumber of MST BPDUs Transmitted from this port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.19 |
dot1sCistPortTxRstBpduCountNumber of RST BPDUs Transmitted from this port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.20 |
dot1sCistPortTxConfigBpduCountNumber of Configuration BPDUs Transmitted from this port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.21 |
dot1sCistPortTxTcnBpduCountNumber of TCN BPDUs Transmitted from this port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.22 |
dot1sCistPortInvalidMstBpduRxCountNumber of Invalid MST BPDUs Received on this port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.23 |
dot1sCistPortInvalidRstBpduRxCountNumber of Invalid RST BPDUs Received on this port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.24 |
dot1sCistPortInvalidConfigBpduRxCountNumber of Invalid Configuration BPDUs Received on this port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.25 |
dot1sCistPortInvalidTcnBpduRxCountNumber of Invalid TCN BPDUs Received on this port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.26 |
dot1sCistPortTransmitSemStateIndicates current State of the Port Transmit state machine.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.27 |
dot1sCistPortReceiveSemStateIndicates current State of the Port Receive state machine.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.28 |
dot1sCistPortProtMigrationSemStateIndicates current State of the Port Protocol Migration
State machine.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.29 |
dot1sCistProtocolMigrationCountThe number of times this Port has migrated from one STP protocol
version to another. The relevant protocols are STP-COMPATIBLE and
RSTP/MSTP.
A Trap is generated on the occurence of this event.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.30 |
dot1sCistPortDesignatedCostThe path cost of the Designated Port of the
segment connected to this port.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.31 |
dot1sCistPortRegionalRootThe unique Bridge Identifier of the bridge recorded as the
CIST Regional Root Identifier in the configuration BPDUs
transmitted.ro BridgeId .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.32 |
dot1sCistPortRegionalPathCostThe contribution of this port to the path cost of paths
towards the CIST Regional Root which include this port.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.33 |
dot1sCistSelectedPortRoleSelected Port Role of the port for this spanning
tree instance.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.34 |
dot1sCistCurrentPortRoleCurrent Port Role of the port for this spanning
tree instance.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.35 |
dot1sCistPortInfoSemStateCurrent state of the Port Information State Machine
for this port in this spanning tree context.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.36 |
dot1sCistPortRoleTransitionSemStateCurrent state of the Port Role Transition State Machine
for this port in this spanning tree context.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.37 |
dot1sCistPortStateTransitionSemStateCurrent state of the Port State Transition State Machine
for this port in this spanning tree context.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.38 |
dot1sCistPortTopologyChangeSemStateCurrent state of the Topology Change State Machine
for this port in this spanning tree context.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.39 |
dot1sCistPortHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node on this port
in units of hundredths of a second.rw Timeout .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.40 |
dot1sCistPortOperVersionThis indicates whether the Port is operationally in the Mstp
mode, Rstp mode or the Stp-compatible mode i.e., whether the
Port is transmitting MST BPDUs, RST BPDUs or Config/TCN BPDUs.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.41 |
dot1sCistPortEffectivePortStateThe effective operational state of the port for CIST. This will
TRUE only when the port is operationally up in the Interface level
and Protocol level for CIST. This is will be set to False for all
other times.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.42 |
dot1sCistPortAutoEdgeStatusThis parameter when TRUE(1) indicates that detection
of a port as Edge Port happens automatically
and FALSE(2) indicates that this feature is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.43 |
dot1sCistPortRestrictedRoleA Boolean value set by management. If TRUE causes the Port not
to be selected as Root Port for the CIST or any MSTI, even it has
the best spanning tree priority vector. Such a Port will be selected
as an Alternate Port after the Root Port has been selected. This
parameter should be FALSE by default. If set it can cause lack of
spanning tree connectivity. It is set by a network administrator to
prevent bridges external to a core region of the network influencing
the spanning tree active topology, possibly because those bridges are
not under the full control of the administrator.
This administrator configuration is also known as 'Root Guard'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.44 |
dot1sCistPortRestrictedTCNA Boolean value set by management. If TRUE causes the Port not
to propagate received topology change notifications and topology
changes to other Ports. This parameter should be FALSE by default.
If set it can cause temporary loss of connectivity after changes in
a spanning trees active topology as a result of persistent
incorrectly learnt station location information. It is set by a
network administrator to prevent bridges external to a core region of
the network causing address flushing in that region, possibly because
those bridges are not under the full control of the administrator or
MAC_Operational for the attached LANs transitions frequently.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.6.1.45 |
dot1sMstiPortTableThis table contains Spanning Tree Instance Specific Port
Information. SEQUENCE OF TabDot1sMstiPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7 |
dot1sMstiPortEntryA list of information maintained by every port for each
and every spanning tree instance. TabDot1sMstiPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1 |
dot1sMstiPortThe Port number of the port for which this entry contains
spanning tree information. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.1 |
dot1sMstiPortPathCostThe contribution of this port to the path cost of
paths towards the MSTI Root which include this port.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.2 |
dot1sMstiPortPriorityThe four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priority must be in steps of 16.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.3 |
dot1sMstiPortDesignatedRootThe unique Bridge Identifier of the bridge recorded as the
MSTI Regional Root in the configuration BPDUs transmitted.ro BridgeId .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.4 |
dot1sMstiPortDesignatedBridgeThe unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment.ro BridgeId .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.5 |
dot1sMstiPortDesignatedPortThe Port identifier of the port on the Designated Bridge
for this port's segment.ro OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.6 |
dot1sMstiPortStateCurrent state of the Port as defined by the Multiple
spanning tree protocol. Port which is Forwarding state
in one instance can be in Discarding (Blocking) state
in another instance.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.7 |
dot1sMstiForcePortStateCurrent state of the Port which can be changed to either
Disabled or Enabled for the specific spanning tree
instance. This object can be set to enabled only if the
'dot1sCistForcePortState' is set to 'enabled' for this portrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.8 |
dot1sMstiPortForwardTransitionsNumber of times this port has transitioned to the
Forwarding State for specific instance.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.9 |
dot1sMstiPortReceivedBPDUsNumber of BPDUs received by this port for this
spanning tree instance.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.10 |
dot1sMstiPortTransmittedBPDUsNumber of BPDUs transmitted on this port for
this spanning tree instance.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.11 |
dot1sMstiPortInvalidBPDUsRcvdNumber of Invalid BPDUs received on this Port
for this spanning tree instance.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.12 |
dot1sMstiPortDesignatedCostThe path cost of the Designated Port of the
segment connected to this port.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.13 |
dot1sMstiSelectedPortRoleSelected Port Role of the port for this spanning
tree instance.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.14 |
dot1sMstiCurrentPortRoleCurrent Port Role of the port for this spanning
tree instance.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.15 |
dot1sMstiPortInfoSemStateCurrent state of the Port Information State Machine
for this port in this spanning tree context.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.16 |
dot1sMstiPortRoleTransitionSemStateCurrent state of the Port Role Transition State Machine
for this port in this spanning tree context.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.17 |
dot1sMstiPortStateTransitionSemStateCurrent state of the Port State Transition State Machine
for this port in this spanning tree context.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.18 |
dot1sMstiPortTopologyChangeSemStateCurrent state of the Topology Change State Machine
for this port in this spanning tree context.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.19 |
dot1sMstiPortEffectivePortStateThe effective operational stae of the port for specific instance.
This is will be TRUE only when the port is operationally up in the
interface level and Protocol level for the specific instance.
This is will be set to false at all other times.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.1.7.1.20 |
dot1sMstTrapsControl OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2 |
dot1sMstSetGlobalTrapOptionThis object is used to enable and disable MSTP traps for memory
failure or buffer failure irrespective of the context in which
the failure occurs.
0 - Traps are not enabled.
1 - Memory and buffer failure traps enabledrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2.1 |
dot1sGlobalErrTrapTypeUsed within the Trap Notification PDU.
It returns the following values
none - none of the below values
memfail - memory allocation failure
bufffail - buffer allocation failurero Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2.2 |
dot1sMstTrapsControlTableList of per virtual bridge Trap Control Info. SEQUENCE OF TabDot1sMstTrapsControlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2.3 |
dot1sMstTrapsControlEntryVirtual bridge TrapsControl information. TabDot1sMstTrapsControlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2.3.1 |
dot1sSetTrapsThis object is used to enable and disable context-specific
MSTP traps. Currently the following are defined
0 - Traps are not enabled.
1 - General Traps like protocol up or down
2 - Exception Traps like port protocol migration or
invalid packet rcvd in port
3 - All the above Trapsrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2.3.1.1 |
dot1sGenTrapTypeUsed within the Trap Notification PDU.
It denotes general events like
none - none of the below values
up - protocol UP,
down - protocol DOWNro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2.3.1.2 |
dot1sPortTrapNotificationTableThis table is used to store the notification information
occured in each of the port for protocol migration and
invalid packet received. This table is maintained per virtual
context in the system. SEQUENCE OF TabDot1sPortTrapNotificationEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2.4 |
dot1sPortTrapNotificationEntryThis entry is used to store the notification information TabDot1sPortTrapNotificationEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2.4.1 |
dot1sPortTrapIndexA unique value, greater than zero, indicating the Port number. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2.4.1.1 |
dot1sPortMigrationTypePort Protocol migration type occured in the portro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2.4.1.2 |
dot1sPktErrTypeType of invalid packet received in each of the portro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2.4.1.3 |
dot1sPktErrValPacket error value corresponding to the above typero Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2.4.1.4 |
dot1sPortRoleTrapNotificationTableThis table is used to store the notification information
occured in each of the port for its role change. This table
is maintained per virtual context in the system. SEQUENCE OF TabDot1sPortRoleTrapNotificationEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2.5 |
dot1sPortRoleTrapNotificationEntryThis entry is used to store the notification information TabDot1sPortRoleTrapNotificationEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2.5.1 |
dot1sPortRoleTypeParticular Role Selected for the Portro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2.5.1.1 |
dot1sOldRoleTypeParticular Role which is existing for the Portro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.2.5.1.2 |
dot1sMstTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.3 |
dot1sTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.3.0 |
dot1sGlobalErrTrapGenerated when any of the error events like memory failure or buffer failure
or protocol migration or new root or topology change occurs NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.3.0.1 |
dot1sGenTrapGenerated when any of the general events like protocol up or
protocol down occurs NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.3.0.2 |
dot1sNewRootTrapGenerated whenever a new root bridge is selected in the topology NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.3.0.3 |
dot1sTopologyChgTrapGenerated when topology change is detected NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.3.0.4 |
dot1sProtocolMigrationTrapGenerated when port protocol migration happens in the port NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.3.0.5 |
dot1sInvalidBpduRxdTrapGenerated when the invalid packet is received for
bpdu/stp/rstp/maximum age/forward delay/hello time NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.3.0.6 |
dot1sRegionConfigChangeTrapGenerated when the MST region's configuration
identifier changes. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.3.0.7 |
dot1sNewPortRoleTrapGenerated whenever a new role is selected for the port NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.118.3.0.8 |
l2Rst OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119 |
dot1wRst OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1 |
dot1wRstTableList of per virtual context RstModule Parameters SEQUENCE OF TabDot1wRstEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.3 |
dot1wRstEntryVirtual Bridge RstModule Parameters. TabDot1wRstEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.3.1 |
dot1wRstContextIdIdentifies the Virtual Bridge Context. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.3.1.1 |
dot1wSystemControlThe administrative system control status requested by management for
the RSTP feature. The value 'start'(1) indicates that all resources
required by RSTP should be allocated and RSTP should be supported
in the device on all ports. The value shutdown(2) indicates that RSTP
should be shutdown in the device on all ports and all allocated memory
must be released.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.3.1.2 |
dot1wModuleStatusThe administrative module status requested by management for the RSTP
Module. This enables or disables RSTP in the system. A value of 'enabled'
(1) indicates that RSTP must be enabled in the device on all the ports.
A value of 'disabled'(2) indicates that RSTP must be disabled in the
device on all the ports. This object can be set only after the object
dot1wSystemControl has been set.rw EnabledStatus .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.3.1.3 |
dot1wTraceOptionThis object is used to enable Trace Statements in the RSTP
Module.
A FOUR BYTE integer is used for enabling the level of tracing.
Each BIT in the four byte integer, represents a particular
level of Trace.
The mapping between the bit positions & the level of trace is
as follows:
0 - Init and Shutdown Traces
1 - Management Traces
2 - Data Path Traces
3 - Control Plane Traces
4 - Packet Dump Traces
5 - Traces related to All Resources except Buffers
6 - All Failure Traces
7 - Buffer Traces
The remaining bits are unused. Combination of trace levels are
also allowed.
For example if the bits 0 and 1 are set, then the Trace
statements related to Init-Shutdown and management
will be printed.
The user has to enter the corresponding INTEGER VALUE for the
bits set. For example if bits 0 and 1 are to be set then user has
to give the value for this object as 3.
Setting the Trace Option to any value will cause the Debug Option
to be set to 0 (i.e.) the Trace Option and Debug Option are mutually
exclusive.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.3.1.4 |
dot1wDebugOptionThis object is used to enable Debug Statements in the RSTP
Module.
A FOUR BYTE integer is used for enabling the level of debugging.
Each BIT in the four byte integer, represents a particular
level of Debug.
The mapping between the bit positions & the level of debug is
as follows:
0 - Init and Shutdown Debug statements
1 - Management Debug statements
2 - Memory related Debug statements
3 - BPDU related Debug statements
4 - Event Handling Debug statements
5 - Timer Module Debug statements
6 - Port Information SEM Debug statements
7 - Port Receive SEM Debug statements
8 - Role Selection SEM Debug statements
9 - Role Transition SEM Debug statements
10 - State Transition SEM Debug statements
11 - Protocol Migration SEM Debug statements
12 - Topology Change SEM Debug statements
13 - Port Transmit SEM Debug statements
14 - Bridge Detection SEM Debug statements
15 - All Failure Debug statements
16 - Redundancy code flow Debug statements
17 - State Machine variable changes debug statements
The remaining bits are unused. Combination of debug levels are
also allowed.
For example if the bits 0 and 1 are set, then the Debug
statements related to Init-Shutdown and management
will be printed.
The user has to enter the corresponding INTEGER VALUE for the
bits set. For example if bits 0 and 1 are to be set then user has
to give the value for this object as 3.
Setting the Debug Option to any value will cause the Trace Option
to be set to 0 (i.e.) the Trace Option and Debug Option are mutually
exclusive.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.3.1.5 |
dot1wRstpUpCountThe number of times RSTP Module has been enabled.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.3.1.6 |
dot1wRstpDownCountThe number of times RSTP Module has been disabled.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.3.1.7 |
dot1wBufferFailureCountThe number of times buffer overflows/failures have occurred.
A Trap is generated on the occurrence of this event.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.3.1.8 |
dot1wMemAllocFailureCountThe number of times memory allocation failures have occurred.
A Trap is generated on the occurrence of this event.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.3.1.9 |
dot1wNewRootIdCountThe number of times this Bridge has detected a new Root in the topology.
A Trap is generated on the occurrence of this event.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.3.1.10 |
dot1wPortRoleSelSmStateThis indicates the current state of the Port Role Selection State
Machine. This object will hold the value 'initbridge' when the
Port Role Selection state machine is in the INIT_BRIDGE state and
the value of 'roleselection' when the state machine is in the
ROLE_SELECTION state.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.3.1.11 |
dot1wOldDesignatedRootThe bridge identifier of the old root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node.ro BridgeId .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.3.1.12 |
dot1wDynamicPathcostCalculationThis object is used to determine whether dynamic pathcost
calculation is allowed or not.The value is determined by
management. If set to true, pathcost is calculated dynamically
from port speed, otherwise the link speed at the time of port
creation is used for calculating the path cost. In both cases
if the user has configured a pathcost for the port that will be
used. By default dynamic pathcost calculation is set to false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.3.1.13 |
dot1wContextNameThis object is used to identity the context-name.ro DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.3.1.14 |
dot1wPortExtTableThis is a table that is an extension to the dot1dStpExtPortTable.
This contains object(s) that are Port-based. SEQUENCE OF TabDot1wPortExtEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4 |
dot1wPortExtEntryEach entry in this table is for each port present in the system.
This table is indexed by the dot1wPort. TabDot1wPortExtEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1 |
dot1wPortA unique value, greater than zero, indicating the Port number. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.1 |
dot1wPortRoleThis indicates the current Port Role assumed by this Port.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.2 |
dot1wPortOperVersionThis indicates whether the Port is operationally in the Rstp
mode or the Stp-compatible mode i.e., whether the Port is
transmitting RST BPDUs or Config/TCN BPDUs.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.3 |
dot1wPortInfoSmStateThis indicates the current state of the Port Information state
machine. This object will hold the value 'disabled' when the
Port Information state machine is in the DISABLED state, the value
'aged' when the state machine is in the AGED state, the value 'update'
when the state machine is in the UPDATE state, the value 'superior'
when the state machine is in the SUPERIOR state, the value 'repeat'
when the state machine is in the REPEAT state, the value
'notdesignated' when the state machine is in the NOT_DESIGNATED state,
the value 'present' when the state machine is in the CURRENT state
and the value 'receive' when the state machine is in the RECEIVE
state and the value 'inferiordesignated' when the state machine is
in the INFERIOR_DESIGNATED state.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.4 |
dot1wPortMigSmStateThis indicates the current state of the Port Protocol Migration state
machine. This object will hold the value 'checkingrstp' when the
Protocol Migration state machine is in the CHECKING_RSTP state,
the value 'selectingstp' when the state machine is in the
SELECTING_STP state, the value 'sensing' when the state machine
is in the SENSING state.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.5 |
dot1wPortRoleTransSmStateThis indicates the current state of the Port Role Transition state
machine. This object will hold the value 'init' when the Port Role
Transition state machine is in the INIT state, the value 'disableport'
when the state machine is in the DISABLE_PORT state, the value
'disabledport' when the state machine is in the DISABLED_PORT state,
the value 'rootport' when the state machine is in the ROOT_PORT state,
the value 'desgport' when the state machine is in the DESIGNATED_PORT
state, the value 'backupport' when the state machine is in BACKUP_PORT
state, the value 'rootproposed' when the state machine is in the
ROOT_PROPOSED state, the value 'rootagreed' when the state machine
is in the ROOT_AGREED state, the value 'reroot' when the state machine
is in the REROOT state, the value 'rootforward' when the state machine
is in the ROOT_FORWARD state, the value 'rootlearn' when the state
machine is in the ROOT_LEARN state, the value 'rerooted' when the
state machine is in the REROOTED state, the value 'designatedpropose'
when the state machine is in the DESIGNATED_PROPOSE state, the value
'designatedsynced' when the state machine is in the DESIGNATED_SYNCED
state, the value 'designatedretired' when the state machine is in the
DESIGNATED_RETIRED state, the value 'designatedforward' when the state
machine is in the DESIGNATED_FORWARD state, the value 'designatedlearn'
when the state machine is in the DESIGNATED_LEARN state and the value
'designatedlisten' when the state machine is in the DESIGNATED_LISTEN
state.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.6 |
dot1wPortStateTransSmStateThis indicates the current state of the Port State Transition state
machine. This object will hold the value 'discarding' when the Port
State Transition state machine is in the DISCARDING state, the value
'learning' when the state machine is in the LEARNING state and the
value 'forwarding' when the state machine is in the FORWARDING state.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.7 |
dot1wPortTopoChSmStateThis indicates the current state of the Topology Change state machine.
This object will hold the value 'inactive' when the Topology Change
state machine is in the INACTIVE state, the value 'learning' when the
state machine is in the LEARNING state, the value 'active' when the
state machine is in the ACTIVE state, the value 'detected' when the
state machine is in the DETECTED state, the value 'notifiedtcn' when
the state machine is in the NOTIFIED_TCN state, the value 'notifiedtc'
when the state machine is in the NOTIFIED_TC state, the value
'propagating' state when the state machine is in the PROPAGATING
state and the value 'acknowledged' when the state machine is in the
ACKNOWLEDGED state.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.8 |
dot1wPortTxSmStateThis indicates the current state of the Port Transmit state machine.
This object will hold the value 'transmitinit' when the Port Transmit
state machine is in the TRANSMIT_INIT state, the value
'transmitperiodic' when the state machine is in the TRANSMIT_PERIODIC
state, the value 'transmitconfig' when the state machine is in the
TRANSMIT_CONFIG state, the value 'transmittcn', when the state machine
is in the TRANSMIT_TCN state, the value 'transmitrstp', when the state
machine is in the TRANSMIT_RSTP state and the value 'idle' when
the state machine is in the IDLE state.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.9 |
dot1wPortRxRstBpduCountThe number of RST BPDUs that have been received on this Port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.10 |
dot1wPortRxConfigBpduCountThe number of Config BPDUs that have been received on this Port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.11 |
dot1wPortRxTcnBpduCountThe number of TCN BPDUs that have been received on this Port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.12 |
dot1wPortTxRstBpduCountThe number of RST BPDUs that have been transmitted by this Port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.13 |
dot1wPortTxConfigBpduCountThe number of Config BPDUs that have been transmitted by this Port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.14 |
dot1wPortTxTcnBpduCountThe number of TCN BPDUs that have been transmitted by this Port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.15 |
dot1wPortInvalidRstBpduRxCountThe number of invalid RSTP BPDUs that have been received on this Port.
A Trap is generated on the occurrence of this event.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.16 |
dot1wPortInvalidConfigBpduRxCountThe number of invalid Configuration BPDUs that have been received on
this Port. A Trap is generated on the occurrence of this event.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.17 |
dot1wPortInvalidTcnBpduRxCountThe number of invalid TCN BPDUs that have been received on this Port.
A Trap is generated on the occurrence of this event.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.18 |
dot1wPortProtocolMigrationCountThe number of times this Port has migrated from one STP protocol
version to another. The relevant protocols are STP-COMPATIBLE and RSTP.
A Trap is generated on the occurrence of this event.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.19 |
dot1wPortEffectivePortStateThe effective Operational state of the port. This object will be
set to TRUE only when the port is operationally up in the
interface manager and the force Port State for this port and
specified port state is enabled. Otherwise this object is set
to FALSE.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.20 |
dot1wPortAutoEdgeThis parameter when TRUE(1) indicates that detection of a port
as Edge Port happens automatically and FALSE(2)
indicates that this feature is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.21 |
dot1wPortRestrictedRoleA Boolean value set by management. If TRUE causes the Port not
to be selected as Root Port for the CIST or any MSTI, even it has
the best spanning tree priority vector. Such a Port will be selected
as an Alternate Port after the Root Port has been selected. This
parameter should be FALSE by default. If set it can cause lack of
spanning tree connectivity. It is set by a network administrator to
prevent bridges external to a core region of the network influencing
the spanning tree active topology, possibly because those bridges are
not under the full control of the administrator.
This administrator configuration is also known as 'Root Guard'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.22 |
dot1wPortRestrictedTCNA Boolean value set by management. If TRUE causes the Port not
to propagate received topology change notifications and topology
changes to other Ports. This parameter should be FALSE by default.
If set it can cause temporary loss of connectivity after changes in
a spanning trees active topology as a result of persistent
incorrectly learnt station location information. It is set by a
network administrator to prevent bridges external to a core region of
the network causing address flushing in that region, possibly because
those bridges are not under the full control of the administrator or
MAC_Operational for the attached LANs transitions frequently.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.1.4.1.23 |
dot1wRstTrapsControl OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.2 |
dot1wSetGlobalTrapsThis object is used to enable and disable RSTP traps for memory
failure or buffer failure irrespective of the context in which
the failure occurs.
0 - Traps are not enabled.
1 - Memory and buffer failure traps enabledrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.2.1 |
dot1wGlobalErrTrapTypeUsed within the Trap Notification PDU.
It returns the following values
none - none of the below values
memfail - memory allocation failure
bufffail - buffer allocation failurero Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.2.2 |
dot1wRstTrapsControlTableList of per virtual bridge TrapsControl Info. SEQUENCE OF TabDot1wRstTrapsControlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.2.3 |
dot1wRstTrapsControlEntryVirtual bridge TrapsControl information. TabDot1wRstTrapsControlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.2.3.1 |
dot1wSetTrapsThis object is used to enable and disable context-specific
RSTP traps. Currently the following are defined
0 - Traps are not enabled.
1 - Protocol up or down traps.
2 - Exception Traps like port protocol migration or invalid packet
rcvd in port
3 - All the above Trapsrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.2.3.1.1 |
dot1wGenTrapTypeUsed within the Trap Notification PDU.
It denotes general events like
none - none of the below values
up - protocol UP,
down - protocol DOWNro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.2.3.1.2 |
dot1wPortTrapNotificationTableThis table is used to store the notification information
occurred in each of the port for protocol migration and
invalid packet received SEQUENCE OF TabDot1wPortTrapNotificationEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.2.4 |
dot1wPortTrapNotificationEntryThis entry is used to store the notification information TabDot1wPortTrapNotificationEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.2.4.1 |
dot1wPortTrapIndexA unique value, greater than zero, indicating the Port number. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.2.4.1.1 |
dot1wPortMigrationTypePort Protocol migration type occurred in the portro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.2.4.1.2 |
dot1wPktErrTypeType of invalid packet received in each of the portro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.2.4.1.3 |
dot1wPktErrValPacket error value corresponding to the above typero Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.2.4.1.4 |
dot1wPortRoleTypeParticular Role Selected for the Portro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.2.4.1.5 |
dot1wOldRoleTypeParticular Role which is existing for the Portro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.2.4.1.6 |
dot1wRstTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.3 |
dot1wTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.3.0 |
dot1wGlobalErrTrapGenerated when any of the error events like memory failure or
buffer failure or protocol migration or new root or topology
change occurrs NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.3.0.1 |
dot1wGenTrapGenerated when any of the general events like protocol up or
protocol down occurrs NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.3.0.2 |
dot1wNewRootTrapGenerated whenever a new root bridge is selected in the topology NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.3.0.3 |
dot1wTopologyChgTrapGenerated when topology change is detected NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.3.0.4 |
dot1wProtocolMigrationTrapGenerated when port protocol migration happens in the port NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.3.0.5 |
dot1wInvalidBpduRxdTrapGenerated when the invalid packet is received for
bpdu/stp/rstp/maximum age/forward delay/hello time NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.3.0.6 |
dot1wNewPortRoleTrapGenerated whenever a new role is selected for the port NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.119.3.0.7 |
l2Vlan OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120 |
l2Dot1qVlan OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.1 |
dot1qVlanGlobalTraceEnable/Disable the global trace in VLAN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.1.1 |
dot1qVlanGlobalsTableList of per virtual context Vlan Module Parameters. SEQUENCE OF TabDot1qVlanGlobalsEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.1.2 |
dot1qVlanGlobalsEntryPer virtual context Vlan module parmaters. TabDot1qVlanGlobalsEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.1.2.1 |
dot1qVlanGlobalsContextIdIdentifies the virtual context in the system. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.1.2.1.1 |
dot1qGarpShutdownStatusThe administrative status requested by management for GARP
The value true(1) indicates that GARP should be shutdown
in the device on all ports. All memory will be released.
The value false(2) indicates that GARP should be active in
the device on all ports. This object can be set to true only
when none of the Garp applications (GVRP, GMRP) are enabled.
Whenever Garp is enabled after shutdown, Gvrp and Gmrp must
be enabled explicitly.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.1.2.1.6 |
dot1qVlanDebugEnables the tracing in the selected submodule in VLAN. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - Management trace.
BIT 2 - Data path trace.
BIT 3 - Control Plane trace.
BIT 4 - Packet Dump.
BIT 5 - OS Resource trace.
BIT 6 - All Failure trace (All failures including Packet Validation)
BIT 7 - Buffer Trace.
Different submodule Tracing -
BIT 16 - Tracing in VLAN module.
BIT 17 - Tracing in VLAN Priority module.
BIT 18 - Tracing in VLAN Redundancy module.
The remaining bits are reserved. The combination of levels and
submodules are allowed i.e. Tracing can be allowed at all failure
and data path level in All submodules by setting the BIT
appropriately.
For Example, setting the debug value to the following bit stream,
00000000000000010000000000000100 will enable data path trace
prints in VLAN module. Multiple submodules and multiple levels can
be combined by setting the corresponding bits.
For Example, setting the debug value to the following bit stream,
00000000000000110000000000001100 will enable data path and
control plane trace prints in VLAN and VLAN Priority modules.
Note : BIT0 is the least significant bit and BIT31 is the most
significant bit.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.1.2.1.7 |
dot1qVlanLearningModeThe type of VLAN learning mode.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.1.2.1.8 |
dot1qVlanOperStatusThe operational status of the Vlan module.
The value enabled(1) indicates that Vlan module is currently enabled
in the device.
The value disabled(2) indicates that Vlan module is currently disabled
in the device.ro EnabledStatus .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.1.2.1.10 |
dot1qGvrpOperStatusThe operational status of the GVRP module.
The value enabled(1) indicates that GVRP module is currently enabled
in the device.
The value disabled(2) indicates that GVRP module is currently disabled
in the device.ro EnabledStatus .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.1.2.1.11 |
portBaseVlan OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.3 |
portBaseVlanEnablePerPortThe set of ports which are in port-based VLAN mode.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.3.1 |
portBaseVlanCurrentTableA table containing current configuration information
for each VLAN currently configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received. SEQUENCE OF TabPortBaseVlanCurrentEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.3.2 |
tabPortBaseVlanCurrentEntryInformation for a VLAN configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received. TabPortBaseVlanCurrentEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.3.2.1 |
portBaseVlanIndexThe VLAN-ID or other identifier referring to this VLAN. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.3.2.1.1 |
portBaseVlanNameThe VLAN-Name referring to this VLAN.rw OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.3.2.1.2 |
portBaseVlanCurrentEgressPortsThe set of ports which are transmitting traffic for
this VLAN as either tagged or untagged frames.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.3.2.1.3 |
portBaseVlanStatusThis object indicates the status of this entry.
other(1) - this entry is currently in use but the
conditions under which it will remain so differ
from the following values.
permanent(2) - this entry, corresponding to an entry
in portBaseVlanStaticTable, is currently in use and
will remain so after the next reset of the
device. The port lists for this entry include
ports from the equivalent portBaseVlanStaticTable
entry and ports learnt dynamically.
dynamicGvrp(3) - this entry is currently in use
and will remain so until removed by GVRP. There
is no static entry for this VLAN and it will be
removed when the last port leaves the VLAN.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.3.2.1.4 |
portBaseVlanCreationTimeThe value of sysUpTime when this VLAN was created.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.3.2.1.5 |
portBaseVlanRowStatusThe status of this concsystual row. All writable objects in this
row may be modified only when the row status is not active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.3.2.1.6 |
portBaseStatic OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4 |
portBaseStaticUnicastTableA table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded. A
value of zero in this table as the port number from
which frames with a specific destination address are
received, is used to specify all ports for which there
is no specific entry in this table for that particular
destination address. Entries are valid for unicast
addresses only. SEQUENCE OF TabPortBaseStaticUnicastEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4.1 |
tabPortBaseStaticUnicastEntryFiltering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allowed to be forwarded. TabPortBaseStaticUnicastEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4.1.1 |
portBaseStaticUnicastIndexThe index of entries int this table. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4.1.1.1 |
portBaseStaticUnicastVlanIndexThe VLAN-ID or other identifier referring to this VLAN.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4.1.1.2 |
portBaseStaticUnicastAddressThe destination MAC address in a frame to which this
entry's filtering information applies. This object must
take the value of a unicast address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4.1.1.3 |
portBaseStaticUnicastAllowedToGoToThe set of ports for which a frame with a specific
unicast address will be flooded in the event that it
has not been learned. It also specifies the set of
ports a specific unicast address may be dynamically
learnt on. The portBaseTpFdbTable will have an equivalent
entry with a portBaseTpFdbPort value of '0' until this
address has been learnt, when it will be updated with
the port the address has been seen on. This only
applies to ports that are members of the VLAN, defined
by portBaseVlanCurrentEgressPorts. The default value of
this object is a string of ones of appropriate length.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4.1.1.4 |
portBaseStaticUnicastStatusThis object indicates the status of this entry.
other(1) - this entry is currently in use but
the conditions under which it will remain
so differ from the following values.
invalid(2) - writing this value to the object
removes the corresponding entry.
permanent(3) - this entry is currently in use
and will remain so after the next reset of
the bridge.
deleteOnReset(4) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(5) - this entry is currently in
use and will remain so until it is aged out.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4.1.1.5 |
portBaseStaticUnicastRowStatusThe status of this concsystual row. All writable objects in this
row may be modified only when the row status is not active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4.1.1.6 |
portBaseStaticMulticastTableA table containing filtering information for Multicast
and Broadcast MAC addresses for each VLAN, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific Multicast
and Broadcast destination addresses are allowed to be
forwarded. A value of zero in this table as the port
number from which frames with a specific destination
address are received, is used to specify all ports for
which there is no specific entry in this table for that
particular destination address. Entries are valid for
Multicast and Broadcast addresses only. SEQUENCE OF TabPortBaseStaticMulticastEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4.2 |
tabPortBaseStaticMulticastEntryFiltering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from this specific port
for this VLAN and containing this Multicast or Broadcast
destination address are allowed to be forwarded. TabPortBaseStaticMulticastEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4.2.1 |
portBaseStaticMulticastIndexThe index of entries int this table. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4.2.1.1 |
portBaseStaticMulticastVlanIndexThe VLAN-ID or other identifier referring to this VLAN.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4.2.1.2 |
portBaseStaticMulticastAddressThe destination MAC address in a frame to which this
entry's filtering information applies. This object must
take the value of a Multicast or Broadcast address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4.2.1.3 |
portBaseStaticMulticastStaticEgressPortsThe set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must be forwarded, regardless of
any dynamic information e.g. from GMRP. A port may not
be added in this set if it is already a member of the
set of ports in portBaseStaticMulticastForbiddenEgressPorts.
The default value of this object is a string of ones of
appropriate length.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4.2.1.4 |
portBaseStaticMulticastStatusThis object indicates the status of this entry.
other(1) - this entry is currently in use but
the conditions under which it will remain
so differ from the following values.
invalid(2) - writing this value to the object
removes the corresponding entry.
permanent(3) - this entry is currently in use
and will remain so after the next reset of
the bridge.
deleteOnReset(4) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(5) - this entry is currently in
use and will remain so until it is aged out.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4.2.1.5 |
portBaseStaticMulticastRowStatusThe status of this concsystual row. All writable objects in this
row may be modified only when the row status is not active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.120.4.2.1.6 |
fslldp OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158 |
fsLldpSystem OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.1 |
fsLldpSystemControlThe administrative system control status of LLDP
module. The value 'start' (1) indicates that all
resources required by LLDP module should be allocated
and LLDP should be supported in the device on all ports.
The value 'shutdown' (3) indicates that LLDP should be
shutdown in the device on all ports and all allocated
memory must be released.
Here, start and shutdown are configurable values.
shutdownInProgress can only be read and cannot be wriiten.
When 'shutdown' (3)is configured, the value is changed to
'shutdownInProgress' (2). This is because shutdownInProgress
is used to indicate that shutdown process has been initiated
by setting the object as shutdown but the process is not
comitted. The value should be changed to shutdown once
LLDP is shut on all ports and memory is released.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.1.1 |
fsLldpModuleStatusThe administrative module status of LLDP module.
This enables or disables LLDP in the system. A value of
'enabled' (1) indicates that LLDP is enabled in the device
and can be enabled port-wise. A value of 'disabled' (2)
indicates that LLDP is disabled in the device and also
disabled on all ports.
When LLLDP module status is changed from enabled to disabled,
a global timer (instead of port specific timers) is started
to ensure the successful transmission of shutdown frame on
all ports. Module status change from disabled to enabled is
not allowed when the global timer is running (i.e., when disable
is in progress).rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.1.2 |
fsLldpTraceInputThis object stores the trace option string input given by the user.
To enable particular trace the user has to enter
the corresponding string(given below) assigned for that.
And for enabling more than once traces the user has to enter the
corresponding strings with SPACE delimiter between each string.
For example, to enable
- Init and Shutdown traces
- Management traces
- Neighbor delete traces
- LLDP Port-descr TLV traces and
- LLDP Power-via-mdi TLV traces
The input string is,
enable init-shut mgmt neigh-del port-descr pwr-mdi
For example to disable
- Init and Shutdown traces
- Management traces
- Neighbor delete traces
- LLDP Port-descr TLV traces and
- LLDP Power-via-mdi TLV traces
The input string is,
disable init-shut mgmt neigh-del port-descr pwr-mdi
first value should be either enable or disable.
The entered input string is parsed to get the trace options.
And the corresponding bits of the trace options are set in
fsLldpTraceOption object.
enable - Enables the corresponding option.
disable - Disables the corresponding option.
init-shut - Init and Shutdown traces
mgmt - Management traces
data - Data Path traces
ctrl - Control Plane traces
pkt-dump - Packet Dump traces
resource - Traces related to all
resources except buffers
all-fail - All Failure traces
buf - Buffer allocation/
release traces
neigh-add - Neighbor add traces
neigh-del - Neighbor delete traces
neigh-updt - Neighbor update traces
neigh-drop - Neighbor drop traces
neigh-ageout - Neighbor ageout traces
critical - LLDP Critical traces
all-tlv - LLDP All TLV traces
chassis-id - LLDP Chassis-id TLV traces
port-id - LLDP Port-id TLV trace
ttl - LLDP Ttl TLV trace
port-descr - LLDP Port-descr TLV traces
sys-name - LLDP Sys-name TLV traces
sys-descr - LLDP Sys-descr TLV traces
sys-capab - LLDP Sys-capab TLV traces
mgmt-addr - LLDP Mgmt-addr TLV traces
port-vlan - LLDP Port-vlan TLV traces
ppvlan - LLDP Port-proto-vlan
TLV traces
vlan-name - LLDP Vlan-name TLV traces
proto-id - LLDP Proto-id TLV traces
mac-phy - LLDP Mac-phy TLV traces
pwr-mdi - LLDP Power-via-mdi TLV traces
lagg - LLDP Link-agg TLV traces
max-frame - LLDP Max-frame-size TLV traces
- - Reserved
By default critical trace is enabled.rw OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.1.3 |
fsLldpTraceOptionThis object is used to store the trace options that are enabled
by the user. The bit positions of the traces is shown below
Bit 0 - init-shut
Bit 1 - mgmt
Bit 2 - data
Bit 3 - ctrl
Bit 4 - pkt-dump
Bit 5 - resource
Bit 6 - all-fail
Bit 7 - buf
Bit 8 - neigh-add
Bit 9 - neigh-del
Bit 10 - neigh-updt
Bit 11 - neigh-drop
Bit 12 - neigh-ageout
Bit 13 - critical
Bit 14 - all-tlv
Bit 15 - chassis-id
Bit 16 - port-id
Bit 17 - ttl
Bit 18 - port-descr
Bit 19 - sys-name
Bit 20 - sys-descr
Bit 21 - sys-capab
Bit 22 - mgmt-addr
Bit 23 - port-vlan
Bit 24 - ppvlan
Bit 25 - vlan-name
Bit 26 - proto-id
Bit 27 - mac-phy
Bit 28 - pwr-mdi
Bit 29 - lagg
Bit 30 - max-frame
Bit 31 - -
By default critical trace(Bit 13) is set.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.1.4 |
fsLldpTLV OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.2 |
fsLldpLocChassisIdSubtypeThe type of encoding used to identify the chassis component
associated with the local system.
When chassis id subtype is configured as chassiscomp/portcomp/local
it is mandatory to configure the fsLldpLocChassisId object.
If fsLldpLocChassisId object is not configured then current value of
fsLldpLocChassisId is advertised.
When chassis id subtype is configured as ifalias/macaddr/nwaddr/
ifname it is not required to configure fsLldpLocChassisId object.
System specific values are used for setting fsLldpLocChassisId
object.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.2.1 |
fsLldpLocChassisIdThe string value used to identify the chassis component
associated with the local system.
Write operation to this object is allowed only when the chassis id
subtype is configured as chassiscomp/portcomp/local.
When chassis id subtype is configured as ifalias/macaddr/nwaddr/ifname
system specific values are used and hence write operation to this
object is not allowed.ro OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.2.2 |
fsLldpLocPortTableThis table contains one or more rows per port information
associated with the local system known to this agent. SEQUENCE OF FsLldpLocPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.2.3 |
fsLldpLocPortEntryInformation about a particular port component.
Entries may be created and deleted in this table by the
agent. FsLldpLocPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.2.3.1 |
fsLldpLocPortIdSubtypeThe type of port identifier encoding used to identify the port
component associated with the local port.
When port id subtype is configured as portcomp/local it is mandatory
to configure the fsLldpLocPortId object. If fsLldpLocPortId
object is not configured then current value of fsLldpLocPortId is
advertised.
When chassis id subtype is configured as ifalias/macaddr/nwaddr/
ifname/agentcircuitid it is not required to configure fsLldpLocPortId
object. System specific values are used for setting fsLldpLocPortId
object.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.2.3.1.1 |
fsLldpLocPortIdTThe string value used to identify the port component associated
with the local port.
Write operation to this object is allowed only when the chassis id
subtype is configured as chassiscomp/portcomp/local.
When chassis id subtype is configured as ifalias/macaddr/nwaddr/ifname
system specific values are used and hence write operation to this
object is not allowed.rw OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.2.3.1.2 |
fsLldpPortConfigNotificationTypeThis object is used to set the notification type.
If the associated fsLldpNotificationType object has a value of
remTabChg (1),then LLDP agent sends trap notification to NMS
whenever remote table change occurs.
If the associated fsLldpNotificationType object has a value of
misCfg (1),then LLDP agent sends trap notification to NMS
whenever mis-configuration is identified.
If the associated fsLldpNotificationType object has a value of
remTabChgAndMisCfg(3),then LLDP agent sends trap notification to
NMS whenever remote table change occurs or/and whenever
mis-configuration is identified.
LLDP agent send the trap messages only when MIB Object
lldpPortConfigNotificationEnable is true.So
fsLldpNotificationType Object is valid when
lldpPortConfigNotificationEnable Object is true.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.2.3.1.3 |
fsLldpStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.3 |
fsLldpMemAllocFailureThis object gives the count of total memory allocation failuresro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.3.1 |
fsLldpInputQOverFlowsThis object gives the count of total input queue overflowsro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.3.2 |
fsLldpStatsRemTablesUpdatesThe number of times any information advertised by a particular
MSAP is updated in tables contained in lldpRemoteSystemsData and
lldpExtensions objects.ro ZeroBasedCounter32 UNITS "table entries" .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.3.3 |
fsLldpNotification OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.4 |
fsLldpTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.4.0 |
fsLldpRemTablesChangeA fsLldpRemTablesChange notification is sent when the value
of lldpStatsRemTableLastChangeTime changes. It can be
utilized by an NMS to trigger LLDP remote systems table
maintenance polls.
Note that transmission of fsLldpRemTablesChange
notifications are throttled by the agent, as specified by the
'lldpNotificationInterval' object.
The first four objects are already mentioned in the standard
LLDP mib. As the Table Updation notification is also sent in the
same notification PDU these objects are moved to proprietary mib. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.4.0.1 |
fsLldpExceedsMaxFrameSizeA fsLldpExceedsMaxFrameSize notification is sent if the size of LLDP
frame to be transmitted exceeds the maximum frame size (1522 bytes).
This can occur if many number of TLVs need to be included in a single
frame .
It notifies the NMS that the information obtained about this system
from its neighbor is not complete. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.4.0.2 |
fsLldpDupChasisIdA fsLldpDupChasisId notification sent if the configured
chasisId and Received chasisId from the neighbor is same.
It notifies the NMS that the information obtained from its neighbor
is Duplicate. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.4.0.3 |
fsLldpDupSystemNameA fsLldpDupSystemName notification sent if the configured
system name and Received system name from the neighbor is same.
It notifies the NMS that the information obtained from its neighbor
is Duplicate. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.4.0.4 |
fsLldpDupManagmentAddressA fsLldpDupManagementAddress notification sent if the configured
management address and Received management address from the neighbor is same.
It notifies the NMS that the information obtained from its neighbor
is Duplicate. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.4.0.5 |
fsLldpMisConfigPortVlanIDA fsLldpMisConfigPortVlanID notification sent if the Port VlanId of
two systems connected to the same link is different.
It notifies the NMS that the information obtained from its neighbor
is mis-configured. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.4.0.6 |
fsLldpMisConfigPortProtoVlanIDA fsLldpMisConfigPortProtoVlanID notification sent if the Port and
protocol VlanId of two systems connected to the same link is different.
lldpRemPortId and lldpRemChassisId information sent to identify
the remote system.
lldpXdot1RemProtoVlanId is not accesiable since it is the index,
so sending the lldpXdot1RemProtoVlanSupported information,
to know which Port and Protocol VlanId is MisConfigured. PPVID will
be sent along with the OID.
It notifies the NMS that the information obtained from its neighbor
is mis-configured. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.4.0.7 |
fsLldpMisConfigVlanNameA fsLldpMisConfigVlanName notification sent if the vlan name
of two systems connected to the same link is different.
It notifies the NMS that the information obtained from its neighbor
is mis-configured. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.4.0.8 |
fsLldpMisConfigProtocolIdentityA fsLldpMisConfigProtocolIdentity notification sent if the protocol
identity information (example spanning Tree protocol,
the Link Aggregation protocol and proprietary protocol) of
two systems connected to the same link is different.
It notifies the NMS that the information obtained from its neighbor
is mis-configured. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.4.0.9 |
fsLldpMisConfigLinkAggStatusA fsLldpMisConfigLinkAggStatus notification sent if the
Link aggregation configuration of two systems connected to the same link
is different.
It is possible that if one system formed a link aggregation with
a remote port while the other system is unaware of the aggregation.
This type of configuration may cause network loops or
unpredictable communication.
It notifies the NMS that the information obtained from its neighbor
is mis-configured. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.4.0.10 |
fsLldpMisConfigPowerMDIA fsLldpMisConfigPowerMDI notification sent if the power class
configuration of two systems connected to the same link is different.
It notifies the NMS that the information obtained from its neighbor
is mis-configured. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.4.0.11 |
fsLldpMisConfigMaxFrameSizeA fsLldpMisConfigMaxFrameSize notification sent if the
maximum frame size configuration of two systems connected to
the same link is different.
Difference in maximum frame size can result in loss of frames if
the sending station advertised maximum frame size is larger
than the receiveing station.
It notifies the NMS that the information obtained from its neighbor
is mis-configured. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.4.0.12 |
fsLldpMisConfigOperMauTypeA fsLldpMisConfigOperMauType notification sent if the
Operational MauType of the two systems connected to the same link is different.
It notifies the NMS that the information obtained from its neighbor
is mis-configured. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.158.4.0.13 |
l2VoiceVlan OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163 |
voicevlanSystem OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.1 |
voiceVlanModeVoice VLAN is a feature that allows you to automatically place
the voice traffic from IP phone to an assigned VLAN to enhance
the VoIP service.
This object is for enabling or disabling Voice Vlan function
in the system.
If the Vlan mode is in Asymmetric VLAN mode, Voice VLAN can not
be enabled.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.1.2 |
voiceVlanIdThe ID of VLAN that you want the voice traffic to be in.
It must be a exist vlan id.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.1.3 |
voiceVlanTimeoutA period of time in hour to remove a port from voice VLAN
if the port is an automatic VLAN member.
The Timeout range is 1~120 hours.
Default aging time is 1 hour.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.1.4 |
voiceVlanPriorityThe 802.1p priority levels of the traffic in the Voice VLAN.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.1.5 |
voicevlanPortControlTableA table that contains Voice Vlan Port Control
configuration information. SEQUENCE OF VoiceVlanPortControlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.1.6 |
voicevlanPortControlEntryA list of Voice Vlan Control configuration
parameters for each Port on this device. VoiceVlanPortControlEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.1.6.1 |
voicevlanPortControlIndexThe voice vlan port index.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.1.6.1.1 |
voicevlanPortAutoDetectionThis object is for enabling or disabling Voice Vlan Auto
Detection in the port.
If the auto detection is enable, switch will add this port
to the voice VLAN automatically if it detects the device OUI
matches the Telephony OUI.
If the port is a static member of voice vlan or a LA member,
it can not enable voice vlan auto detection.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.1.6.1.2 |
voicevlanPortStateThis object indicates Voice vlan state to this Port.
manual - this port is a static member of voice vlan.
dynamic - this port is a dynamic member of voice vlan.
none - this port is not a member of voice vlan.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.1.6.1.3 |
voicevlanOUI OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.2 |
voicevlanOUITableA voice vlan OUI entry containing the description and mac. SEQUENCE OF VoicevlanOUIEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.2.1 |
voicevlanOUIEntryA voice vlan OUI entry containing the description and mac. VoicevlanOUIEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.2.1.1 |
voicevlanOUITelephonyOUIAn Organizationally Unique Identifier (OUI) is a 24-bit number
that is purchased from the IEEE Registration Authority. This identifier
uniquely identifies a vendor, manufacturer, or other organization.
This object indicates the voice traffic's OUI that user created.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.2.1.1.1 |
voicevlanOUIDescriptionThe Description for the OUI.rw OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.2.1.1.2 |
voicevlanOUIMaskVoice vlan OUI Mask. Always be FF:FF:FF:00:00:00.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.2.1.1.3 |
voicevlanOUIStatusThis object indicates the status of this entry.
To create a new entry, you must set the voicevlanOUIStatus
to be CreateAndGo, then this entry will turn to be Active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.163.2.1.1.4 |
trafficSeg OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.165 |
trafficSegTableA Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel SEQUENCE OF TrafficSegEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.165.1 |
trafficSegEntryThere is one entry in this table for each created
port-channel port TrafficSegEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.165.1.1 |
trafficSegIfIndexThe ifIndex of the port-channel(Aggregator's
interface index).ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.165.1.1.1 |
trafficSegMemberListList of the member port of the port-channel.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.165.1.1.2 |
atiAclMib OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166 |
atiAcl OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1 |
atiAclClassifierTableACL Classifier entry table. SEQUENCE OF AtiAclClassifierEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1 |
atiAclClassifierEntryClassifier is used to specify a packet type for Policies. AtiAclClassifierEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1 |
atiAclClassifierIndexThe index of the Classifier entry.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.1 |
atiAclClassifierSrcMacSource MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.2 |
atiAclClassifierSrcMacMaskLenSource MAC mask length.
1-48: length in bits
0: Ignoredrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.3 |
atiAclClassifierDstMacDestination MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.4 |
atiAclClassifierDstMacMaskLenDestination MAC mask length.
1-48: length in bits
0: Ignoredrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.5 |
atiAclClassifierVlanId802.1Q Vlan Id.
1-4000: Vlan Id
-1: Ignoredrw Integer32 (-1..4000) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.6 |
atiAclClassifierCos802.1p priority.
0-7: 802.1p priority value
-1: Ignoredrw Integer32 (-1..7) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.7 |
atiAclClassifierEtherTypeEtherType.
0-65535: EtherType number
-1: Ignoredrw Integer32 (-1..65535) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.8 |
atiAclClassifierSrcIpSource IP address.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.10 |
atiAclClassifierSrcIpMaskLenSource IP mask length.
1-32: length in bits
0: Ignoredrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.11 |
atiAclClassifierDstIpDestination IP address.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.12 |
atiAclClassifierDstIpMaskLenDestination IP mask length.
1-32: length in bits
0: Ignoredrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.13 |
atiAclClassifierDscpDifferentiated Services Code Point.
0-63: DSCP value
-1: Ignoredrw Integer32 (-1..63) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.14 |
atiAclClassifierProtocolLayer 4 protocol type.
0-255: Layer 4 protocol number
-1: Ignoredrw Integer32 (-1..255) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.15 |
atiAclClassifierSrcPortTCP/UDP Source port.
0-65535: port number
-1: Ignoredrw Integer32 (-1..65535) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.20 |
atiAclClassifierDstPortTCP/UDP Destination port.
0-65535: port number
-1: Ignoredrw Integer32 (-1..65535) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.21 |
atiAclClassifierRowStatusThe row status of the entry.
1: write - enable the entry
read - entry is enabled
2: write - disable the entry
read - entry is disabled
3: read - entry is not ready
5: write - create the entry
6: write - delete the entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.1.1.30 |
atiAclProfileActionTableACL Profile Action entry table. SEQUENCE OF AtiAclProfileActionEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.2 |
atiAclProfileActionEntryProfile Action is used to manipulate the DSCP or CoS values in a packet. AtiAclProfileActionEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.2.1 |
atiAclProfileActionIndexThe index of the Action entry.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.2.1.1 |
atiAclProfileActionCosPolicied-Cos.
0-7: 802.1p priority value
-1: Ignoredrw Integer32 (-1..7) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.2.1.2 |
atiAclProfileActionDscpPolicied-DSCP.
0-63: DSCP value
-1: Ignoredrw Integer32 (-1..63) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.2.1.3 |
atiAclProfileActionRowStatusThe row status of the entry.
1: write - enable the entry
read - entry is enabled
2: write - disable the entry
read - entry is disabled
3: read - entry is not ready
5: write - create the entry
6: write - delete the entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.2.1.4 |
atiAclInProfileActionTableACL In-Profile Action entry table. SEQUENCE OF AtiAclInProfileActionEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.3 |
atiAclInProfileActionEntryIn-Profile Action is used to assign an action to a policy. AtiAclInProfileActionEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.3.1 |
atiAclInProfileActionIndexThe index of the In-Profile Action entry.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.3.1.1 |
atiAclInProfileActionPermitDenyPermit/Deny action.
0: Permit
1: Denyrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.3.1.2 |
atiAclInProfileActionActionIdThe index of Action entry used by this In-Profile entry.
1-72: Action entry index
0: Ignoredrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.3.1.3 |
atiAclInProfileActionRowStatusThe row status of the entry.
1: write - enable the entry
read - entry is enabled
2: write - disable the entry
read - entry is disabled
3: read - entry is not ready
5: write - create the entry
6: write - delete the entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.3.1.4 |
atiAclOutProfileActionTableACL Out-Profile Action entry table. SEQUENCE OF AtiAclOutProfileActionEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.4 |
atiAclOutProfileActionEntryOut-Profile Action is used to assign a classifier index to a profile action ID
as well as a committed rate and a burst size AtiAclOutProfileActionEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.4.1 |
atiAclOutProfileActionIndexThe index of the Out-Profile Action entry.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.4.1.1 |
atiAclOutProfileActionPermitDenyPermit/Deny action.
0: Permit
1: Denyrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.4.1.2 |
atiAclOutProfileActionCommittedRateCommitted rate in Kbps.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.4.1.3 |
atiAclOutProfileActionBurstSizeMax burst size which is the maximum amount of data in KB.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.4.1.4 |
atiAclOutProfileActionActionIdThe index of Action entry used by this Out-Profile entry.
1-72: Action entry index
0: Ignoredrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.4.1.5 |
atiAclOutProfileActionRowStatusThe row status of the entry.
1: write - enable the entry
read - entry is enabled
2: write - disable the entry
read - entry is disabled
3: read - entry is not ready
5: write - create the entry
6: write - delete the entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.4.1.6 |
atiAclPortListTableACL Port-List entry table. SEQUENCE OF AtiAclPortListEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.5 |
atiAclPortListEntryPort-List is used to specify a list of ports. AtiAclPortListEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.5.1 |
atiAclPortListIndexThe index of the Port-List entry.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.5.1.1 |
atiAclPortListStringPort-list string. e.g. 1,3,5-8rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.5.1.2 |
atiAclPortListRowStatusThe row status of the entry.
1: write - enable the entry
read - entry is enabled
2: write - disable the entry
read - entry is disabled
3: read - entry is not ready
5: write - create the entry
6: write - delete the entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.5.1.3 |
atiAclPolicyTableACL Policy entry table. SEQUENCE OF AtiAclPolicyEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.6 |
atiAclPolicyEntryPolicy controls the ingress traffic on a port.
It defines a category of traffic and the action of the port when it receives
packets of the category. AtiAclPolicyEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.6.1 |
atiAclPolicyIndexThe index of the Policy entry.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.6.1.1 |
atiAclPolicyClassifierIndexThe index of Classifier entry used by this Policy entry.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.6.1.2 |
atiAclPolicySequenceThe sequence of the Policy entry.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.6.1.3 |
atiAclPolicyInProfileIndexThe index of In-Profile entry used by this Policy entry.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.6.1.4 |
atiAclPolicyOutProfileIndexThe index of Out-Profile entry used by this Policy entry.
0: Ignoredrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.6.1.5 |
atiAclPolicyPortListIndexThe index of Port-List entry used by this Policy entry.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.6.1.6 |
atiAclPolicyRowStatusThe row status of the entry.
1: write - enable the entry
read - entry is enabled
2: write - disable the entry
read - entry is disabled
3: read - entry is not ready
5: write - create the entry
6: write - delete the entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.1.6.1.7 |
atiMacFilter OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.2 |
atiDstMacFilterTableDstMacFilter entry table. SEQUENCE OF AtiDstMacFilterEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.2.1 |
atiDstMacFilterEntryDstMacFilter is used to filter the packets by the specific Destination MAC. AtiDstMacFilterEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.2.1.1 |
atiDstMacFilterIndexThe index of the DstMacFilter entry.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.2.1.1.1 |
atiDstMacFilterAddressDestnation MAC addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.2.1.1.2 |
atiDstMacFilterRowStatusThe row status of the entry.
1: write - enable the entry
read - entry is enabled
2: write - disable the entry
read - entry is disabled
3: read - entry is not ready
5: write - create the entry
6: write - delete the entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.166.2.1.1.3 |
l2DhcpSnoop OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181 |
dhcpSnoopSystemStatusEnable/Disable DHCP Snooping.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.1 |
dhcpSnoopOption82InsertionDetermine if to insert DHCP option 82 into packets.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.2 |
dhcpSnoopPassThroughOption82Determine if to pass through DHCP packets with option 82.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.3 |
dhcpSnoopVerifyMACAddressDetermine if to verify MAC address for incoming DHCP packets.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.4 |
dhcpSnoopBackupDatabaseDetermine if to backup database to flash memory.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.5 |
dhcpSnoopBackupDatabaseIntervalDetermine the period to backup database.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.6 |
dhcpSnoopVLANSettingTableA table of DHCP snooping VLAN settings. SEQUENCE OF TabDhcpSnoopVLANSettingEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.7 |
dhcpSnoopVLANSettingEntryThe entry of DHCP snooping VLAN setting table. TabDhcpSnoopVLANSettingEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.7.1 |
dhcpSnoopVLANSettingVIDThe VLAN ID.ro Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.7.1.1 |
dhcpSnoopVLANSettingStatusThe VLAN status.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.7.1.2 |
dhcpSnoopPortSettingTableA table of DHCP snooping port settings. SEQUENCE OF TabDhcpSnoopPortSettingEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.8 |
dhcpSnoopPortSettingEntryThe entry of DHCP snooping port setting table. TabDhcpSnoopPortSettingEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.8.1 |
dhcpSnoopPortSettingIndexThe port number.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.8.1.1 |
dhcpSnoopPortSettingStatusThe port status.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.8.1.2 |
dhcpSnoopBindindDatabaseTableA table of DHCP snooping bindind database. SEQUENCE OF TabDhcpSnoopBindindDatabaseEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.9 |
dhcpSnoopBindindDatabaseEntryThe entry of DHCP snooping bindind database table. TabDhcpSnoopBindindDatabaseEntry .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.9.1 |
dhcpSnoopBindindDBMacAddressThe MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.9.1.1 |
dhcpSnoopBindindDBVLANIDThe VLAN ID.rw Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.9.1.2 |
dhcpSnoopBindindDBIPAddressThe IP address.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.9.1.3 |
dhcpSnoopBindindDBPortNumberThe port number.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.9.1.4 |
dhcpSnoopBindindDBTypeThe entry type.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.9.1.5 |
dhcpSnoopBindindDBLeaseTimeThe DHCP lease time.rw Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.9.1.6 |
dhcpSnoopBindindDBRowStatusThe entry row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.207.(207).1.3.6.1.4.1.890.1.(1).1.3.6.1.4.1.343.2.19.1.2.10.203.(4).165.181.9.1.7 |