ARUBAWIRED-PROVIDER-BRIDGE-MIB
AI MIB Summary
The ARUBAWIRED-PROVIDER-BRIDGE-MIB enables monitoring and management of HPE Aruba provider bridge (IEEE 802.1Qbg/802.1Qbh) instances and associated VLAN translation tables on ArubaOS-Switch and Aruba Instant devices. It exposes standard and proprietary metrics for provider edge port configurations, service instance states, and MAC address learning tables to facilitate multi-tenant service provider network operations.
This MIB module contains the HPE 'version' of the standard Provider Bridge MIB and the proprietary extensions to it.
Main OID:
arubaWiredProviderBridgeMIB.1.3.6.1.4.1.47196.4.1.1.3.23
18
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
arubaWiredProviderBridgeMIBThis MIB module contains the HPE 'version'
of the standard Provider Bridge MIB and
the proprietary extensions to it. MODULE-IDENTITY .1.3.6.1.4.1.47196.4.1.1.3.23 |
IMPORTSThis MIB module contains the HPE 'version'
of the standard Provider Bridge MIB and
the proprietary extensions to it. Unknown .1.3.6.1.4.1.47196.4.1.1.3.23 |
arubaWiredProviderBridgeNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.23.0 |
arubaWiredProviderBridgeObjects OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.23.1 |
arubaWiredProviderBridgeBase OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.23.1.0 |
arubaWiredProviderBridgeTypearubaWiredProviderBridgeType controls bridge mode configuration.
A device can function in one of the 4 modes defined above.
vlanBridge - provider bridge feature disabled mode,
all VLANs are cvlans.
svlanBridge - provider bridge mode with only svlans.
providerEdgeBridge - provider bridge mode with cvlans and
svlans and mappings between them.
vlanSvlanBridge - provider bridge mode with independent
cvlans and svlans on the same device.
Changing from one mode to another will empty out the
current configuration information and reboot the device.ro Enumeration .1.3.6.1.4.1.47196.4.1.1.3.23.1.0.1 |
arubaWiredProviderBridgeEtherTypeDefines the 2-byte ethertype for provider tagged frames.
The default is 0x88a8.
Changing from one tag-type to another with a given
arubaWiredProviderBridgeType configuration will save
current configurations and reboot the device, the
new tag-type will take effect subsequently.ro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.23.1.0.2 |
arubaWiredProviderBridgeVlanTypeTableHPE proprietary table to classify a
VLAN as a cvlan or an svlan SEQUENCE OF ArubaWiredProviderBridgeVlanTypeEntry .1.3.6.1.4.1.47196.4.1.1.3.23.1.0.3 |
arubaWiredProviderBridgeVlanTypeEntryAn entry for HPE Specific extension table ArubaWiredProviderBridgeVlanTypeEntry .1.3.6.1.4.1.47196.4.1.1.3.23.1.0.3.1 |
arubaWiredProviderBridgeVlanTypeVlanIDThe VLAN ID to which this entry belongs. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.47196.4.1.1.3.23.1.0.3.1.1 |
arubaWiredProviderBridgeVlanTypeIndicates the VLANtype.ro Enumeration .1.3.6.1.4.1.47196.4.1.1.3.23.1.0.3.1.2 |
arubaWiredProviderBridgePortTableThis specifies the designated type of an externally
accessible port on a Provider Bridge. SEQUENCE OF ArubaWiredProviderBridgePortEntry .1.3.6.1.4.1.47196.4.1.1.3.23.1.0.4 |
arubaWiredProviderBridgePortEntryAn entry that specifies the designated type of an
externally accessible port on a Provider Bridge. ArubaWiredProviderBridgePortEntry .1.3.6.1.4.1.47196.4.1.1.3.23.1.0.4.1 |
arubaWiredProviderBridgePortifIndexThe index value that uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IF-MIB's ifIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.47196.4.1.1.3.23.1.0.4.1.1 |
arubaWiredProviderBridgePortTypeThe type of an externally accessible port on
a Provider Bridge.
A customer-edge port is a C-VLAN component Port
on a Provider Edge Bridge that is connected to
customer owned equipment and receives and transmits
frames for a single customer. Designating a port as a
Customer Edge Port implies Provider Edge Bridge
functionality and, specifically, the existence of a
C-VLAN component associated with that port. This
C-VLAN component is uniquely identified within the
Bridge by the port number of the associated Customer
Edge Port.
A customer-network port is an S-VLAN component Port
on a Provider Bridge or within a Provider Edge
Bridge that receives and transmits frame for a
single customer.
A provider-network port is an S-VLAN component Port
on a Provider Bridge that can transmit and
receive frames for multiple customers.ro Enumeration .1.3.6.1.4.1.47196.4.1.1.3.23.1.0.4.1.2 |
arubaWiredProviderBridgeConformance OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.23.2 |
arubaWiredProviderBridgeCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.23.2.1 |
arubaWiredProviderBridgeGroups OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.23.2.2 |