ARUBAWIRED-RPVST-MIB
AI MIB Summary
The ARUBAWIRED-RPVST-MIB module enables monitoring and management of Rapid Per-VLAN Spanning Tree (RPVST) protocol states, port roles, and topology changes on Aruba wired network switches. It provides visibility into VLAN-specific spanning tree instances, including root bridge election, port blocking/forwarding status, and BPDU transmission metrics for each configured VLAN.
This MIB module for Rapid Per VLAN Spanning Tree(RPVST).
Main OID:
arubaWiredRpvstMIB.1.3.6.1.4.1.47196.4.1.1.3.5
77
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
77 total| Object Name |
|---|
arubaWiredRpvstMIBThis MIB module for Rapid Per VLAN Spanning Tree(RPVST). MODULE-IDENTITY .1.3.6.1.4.1.47196.4.1.1.3.5 |
arubaWiredRpvstNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.5.0 |
arubaWiredRpvstErrantBpduReceivedThis Trap is generated when an unexpected (errant) BPDU
has been received on a port. NOTIFICATION-TYPE .1.3.6.1.4.1.47196.4.1.1.3.5.0.1 |
arubaWiredRpvstNewRootTrap generated when sending agent has become
the new root of spanning Tree for the specified VLAN;
the notification is sent by a bridge soon after its election
as the new root. NOTIFICATION-TYPE .1.3.6.1.4.1.47196.4.1.1.3.5.0.2 |
arubaWiredRpvstRootGuardInconsistencyTrap generated when a Root Guard feature enabled port
receives superior BPDUs on its interface for a
given instance. NOTIFICATION-TYPE .1.3.6.1.4.1.47196.4.1.1.3.5.0.3 |
arubaWiredRpvstLoopGuardInconsistencyTrap generated when a Loop Guard feature enabled port
receives superior BPDUs on its interface for a
given instance. NOTIFICATION-TYPE .1.3.6.1.4.1.47196.4.1.1.3.5.0.4 |
arubaWiredRpvstTopologyChangeTrap is generated when a Topology Change is detected in
the specified VLAN. NOTIFICATION-TYPE .1.3.6.1.4.1.47196.4.1.1.3.5.0.5 |
arubaWiredRpvstObjects OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.5.1 |
arubaWiredRpvstGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.5.1.1 |
arubaWiredRpvstResetCountersSetting this object to true(1) will reset
all the RPVST counters. Setting this to
false(2) is no operation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.1.1 |
arubaWiredRpvstExtendedSystemIDCreates a unique bridge identifier for each VLAN by adding the
VLAN ID (vid) value to the priority field of the bridge identifier
in every RPVST BPDU. Indicates whether Extended System ID feature
is enabled or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.1.2 |
arubaWiredRpvstIgnorePVIDInconsistencySetting this object to True(1) will enable RPVST
to run on mismatched PVID links.Once set it will
apply to all RPVST instancesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.1.3 |
arubaWiredRpvstPathCostModearubaWiredRpvstPathCostMode controls which pathcost mode to use.
A device can function in one of the 3 modes defined below.
pathCost8021d - The device calculates the default path cost for
ports based on IEEE 802.1d.
pathCost8021t - The device calculates the default path cost for
ports based on IEEE 802.1t.
proprietary -The device calculates the default path cost for
ports based on the proprietary standard.
Link Speed Vs Pathcost Table
|Link speed| Pathcost in | Pathcost in | Pathcost in |
| | IEEE802.1d | IEEE 802.1t | private standard|
| 10 Mbps | 100 | 2,000,000 | 100 |
| 100 Mbps | 10 | 200,000 | 19 |
| 1000 Mbps| 4 | 20,000 | 4 |
| 10 Gbps | 1 | 2,000 | 2 |rw Enumeration .1.3.6.1.4.1.47196.4.1.1.3.5.1.1.4 |
arubaWiredRpvstVlanTableInformation describing the RPVST configuration
and statistics of the VLANs. SEQUENCE OF ArubaWiredRpvstVlanEntry .1.3.6.1.4.1.47196.4.1.1.3.5.1.2 |
arubaWiredRpvstVlanEntryInformation describing the RPVST configuration
and statistics of each of the VLANs. ArubaWiredRpvstVlanEntry .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1 |
arubaWiredRpvstVlanIdA VLAN ID to uniquely identify the entries. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.1 |
arubaWiredRpvstVlanHelloTimeThe amount of time between the
transmission of configuration BPDUs by this
node on any port in this VLAN when it is root of
the spanning tree, or trying to
become so for this VLAN.rw Integer32 .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.2 |
arubaWiredRpvstVlanForwardDelayThe amount of time between transitioning
from listening to learning and learning to forwarding
by this node on any port when it is acting as a
root for this VLAN.rw Integer32 .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.3 |
arubaWiredRpvstVlanMaxAgeThe maximum age of RPVST information
learned from the network on any port before it is
discarded.rw Integer32 .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.4 |
arubaWiredRpvstVlanPriorityThe value of the write-able portion of the
Bridge ID (i.e., the first two octets of the
(8 octet long) Bridge ID).
The other (last) 6 octets of the Bridge ID are
given by the value dot1dBridgeBaseAddress.rw Integer32 .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.5 |
arubaWiredRpvstVlanRootTo explicitly configure this switch to be
primary/secondary root for this VLAN.rw Enumeration .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.6 |
arubaWiredRpvstVlanRpvstAdminStatusTo enable/disable RPVST on the VLAN.rw Enumeration .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.7 |
arubaWiredRpvstVlanResetCountersSetting this object to true(1) will
reset the RPVST counters for this VLAN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.8 |
arubaWiredRpvstVlanOperHelloTimeThe amount of time between the
transmission of BPDUs by this node on
any port in this VLAN when it is root of
the spanning tree, or trying to become so
for this VLAN. This is the actual value
that this bridge is using.ro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.9 |
arubaWiredRpvstVlanRootPriorityThe priority of root bridge in this VLAN.ro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.10 |
arubaWiredRpvstVlanRootPortThe root port for this VLAN.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.11 |
arubaWiredRpvstVlanRootPathCostThe path cost to the Root from this
bridge in this VLAN.ro Integer32 ( 1..200000000) .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.12 |
arubaWiredRpvstVlanRootMacAddressMAC address of the Root in this VLAN.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.13 |
arubaWiredRpvstVlanRootChangeCounterThe number of times the root has changed for this VLAN.ro Counter32 .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.14 |
arubaWiredRpvstVlanTimeSinceLastTopoChangeThe time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity for this VLAN.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.15 |
arubaWiredRpvstVlanTopoChangeCountThe total number of topology changes detected by
this bridge in this VLAN since the management
entity was last reset or initialized.ro Counter32 .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.16 |
arubaWiredRpvstVlanSendTopoChangeCtrlSetting this object to true(1) will
enable sending of SNMP notifications
for all topology change events on this VLAN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.17 |
arubaWiredRpvstVlanLogPortStateTransitionsSetting this object to true(1) will
enable event logging of PVST port state transitions
for this VLAN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.18 |
arubaWiredRpvstPortTableInformation describing the RPVST specific
configuration and statistics of the ports. SEQUENCE OF ArubaWiredRpvstPortEntry .1.3.6.1.4.1.47196.4.1.1.3.5.1.3 |
arubaWiredRpvstPortEntryInformation describing the RPVST specific
configuration and statistics of the ports. ArubaWiredRpvstPortEntry .1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1 |
arubaWiredRpvstPortIndexThe port ifIndex InterfaceIndex (IF-MIB) .1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.1 |
arubaWiredRpvstPortAdminEdgeThe administrative value of the Edge Port
parameter. A value of true(1) indicates that this
port should be assumed as an edge-port, and a
value of false(2) indicates that this port
should be assumed as a non-edge-port.
Note that even when this object's value is true(1),
the arubaWiredRpvstOperEdgePort can be false(2) if a
BPDU has been received.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.2 |
arubaWiredRpvstPortAdminPointToPointRefer the PointToPoint textual-convention.rw PointToPoint .1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.3 |
arubaWiredRpvstPortAutoEdgeIt is used by the Bridge
detection state machine for the automatic
identification of edge ports.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.4 |
arubaWiredRpvstPortBpduFilteringThis value indicates whether or not
BPDUs need to be filtered on this port and BPDU filter
option forces a port to always stay in the forwarding
state and be excluded from standard STP operation.
If the value is true(1) the received BPDUs will
be dropped and no BPDUs will be transmitted on
the port. If the value is false (2)
the BPDUs will be processed as usual.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.5 |
arubaWiredRpvstPortRestrictedTcnThis value indicates whether or not to
propagate topology changes to other ports.
true(1) causes the port not to propagate topology
changes to other ports.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.6 |
arubaWiredRpvstPortRootGuardSetting this object to true(1) forces port
to not to be selected as root port even if
this port has the least path cost to the root.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.7 |
arubaWiredRpvstPortLoopGuardSetting this object to true(1) causes the
non-designated port to go into the STP loop inconsistent
state instead of the forwarding state. In the
loop-inconsistent state, the port prevents data traffic
through the link, therefore avoiding the loop creation.
When BPDUs again are received on the inconsistent port,
it resumes normal STP operation automatically.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.8 |
arubaWiredRpvstPortBpduProtectionSetting this true (1) indicates that no
BPDUs are expected to be received on this port.
At the reception of BPDUs the BPDU protection
mechanism will disable this port and port will
transition into BPDU Error state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.9 |
arubaWiredRpvstPortVlanTableInformation describing the RPVST configuration
and statistics of the ports in the given VLAN. SEQUENCE OF ArubaWiredRpvstPortVlanEntry .1.3.6.1.4.1.47196.4.1.1.3.5.1.4 |
arubaWiredRpvstPortVlanEntryInformation describing the RPVST configuration
and statistics of the ports in the given VLAN. ArubaWiredRpvstPortVlanEntry .1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1 |
arubaWiredRpvstPortVlanIdA VLAN ID to uniquely identify the entries. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.1 |
arubaWiredRpvstPortVlanIndexThe port ifIndex InterfaceIndex (IF-MIB) .1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.2 |
arubaWiredRpvstPortVlanPathCostThe contribution of this port to the
path cost of paths towards the root
which include this port.
auto(0)rw Integer32 ( 0..200000000) .1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.3 |
arubaWiredRpvstPortVlanPriorityThe value of the port priority field that
is contained in the first (in network byte order)
octet of the (2 octet long) Port ID.rw Integer32 .1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.4 |
arubaWiredRpvstPortVlanResetCountersSetting this object to true(1) will
reset the RPVST counters for this port-vlan pair.
Get on this object will always return false(2)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.5 |
arubaWiredRpvstPortVlanRoleRole played by the port in a given VLAN.ro Enumeration .1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.6 |
arubaWiredRpvstPortVlanStateThe port's current state.
This state controls what action a port
takes on reception of a frame.ro Enumeration .1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.7 |
arubaWiredRpvstPortVlanDesigBridgeThe Bridge Identifier of the bridge that
this port considers to be the Designated
Bridge for this port's segment.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.8 |
arubaWiredRpvstPortVlanOperPointToPointtrue : This value indicates that the MAC is
connected to a point-to-point LAN segment;
i.e., there is at most one other system
attached to the LAN segment.
false: This value indicates that the MAC is connected
to a non-point-to-point LAN segment; i.e.,
there can be more than one other system
attached to the LAN segment.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.9 |
arubaWiredRpvstPortVlanOperEdgeThe operational status of the edge port
parameter. A value of true(1) indicates that this
port should be assumed as an edge-port, and a
value of false(2) indicates that this port should
be assumed as a non-edge-port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.10 |
arubaWiredRpvstPortVlanInconsistencyReasonThe reason for which port is blocked by spanning tree
protection function.ro Enumeration .1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.11 |
arubaWiredRpvstNotificationTableInformation describing the Rpvst configuration
and statistics of the Ports and Vlans. SEQUENCE OF ArubaWiredRpvstNotificationEntry .1.3.6.1.4.1.47196.4.1.1.3.5.1.5 |
arubaWiredRpvstNotificationEntryInformation describing the Rpvst
events for trap generation. ArubaWiredRpvstNotificationEntry .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1 |
arubaWiredRpvstPortNamePort namero DisplayString .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.1 |
arubaWiredRpvstVlanIndexVLAN IDro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.2 |
arubaWiredRpvstPortVlanErrantBpduRxCountThe number of BPDUs received on a
BPDU-filtering
or BPDU-protected enabled port.ro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.3 |
arubaWiredRpvstErrantBpduSrcMacThe source MAC address of the port sending
Errant BPDU.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.4 |
arubaWiredRpvstSuperiorBpduSrcPortThe name of the port sending superior BPDUro DisplayString .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.5 |
arubaWiredRpvstSuperiorBpduSrcMacThe MacAddress of the port sending superior BPDUro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.6 |
arubaWiredRpvstErrantBpduDetectorThe identifier of the feature generating
Errant BPDU trap.ro Enumeration .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.7 |
arubaWiredRpvstDesignatedPortDesignated Port of the Bridge.ro DisplayString .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.8 |
arubaWiredRpvstOldPortRoleOld Port statero DisplayString .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.9 |
arubaWiredRpvstNewPortRolenew port statero DisplayString .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.10 |
arubaWiredRpvstTopoChangeTimeTopology change timero DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.11 |
arubaWiredRpvstPreviousRootBridgeIDBridge ID of the previous Root. Bridge Id
consists of priority and MAC address.ro DisplayString .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.12 |
arubaWiredRpvstNewRootBridgeIDBridge ID of the new Root. Bridge Id
consists of priority and MAC address.ro DisplayString .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.13 |
arubaWiredRpvstRootBridgeChangeTimeStampTime when the root changedro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.14 |
arubaWiredRpvstIdVLAN ID Integer32 .1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.15 |
arubaWiredRpvstConformance OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.5.2 |
arubaWiredRpvstGroups OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.5.2.1 |
arubaWiredRpvstCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.5.2.2 |