ARUBAWIRED-VSX-MIB
The ARUBAWIRED-VSX-MIB provides SNMP access to monitor and manage High Availability and Virtual Switching Extension (VSX) cluster states, synchronization status, and inter-chassis link health on HPE Aruba CX switches. It exposes specific metrics for VSX peer relationships, including active/standby roles, keepalive status, and configuration synchronization counters to ensure cluster integrity.
Imported Objects
Objects
59 total| Object Name |
|---|
arubaWiredVsxMIBThis is the MIB module related to HPE Aruba VSX feature MODULE-IDENTITY .1.3.6.1.4.1.47196.4.1.1.3.7 |
arubaWiredVsxConfig OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.7.1 |
arubaWiredVsxIslConfig OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.7.1.1 |
arubaWiredVsxIslPortInterface name corresponding to the VSX InterSwitchLink port. A value of 0 means there is no ISL port configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.7.1.1.1 |
arubaWiredVsxIslHelloIntervalISLP hello interval in seconds. The default value is 1.rw Integer32 .1.3.6.1.4.1.47196.4.1.1.3.7.1.1.2 |
arubaWiredVsxIslHoldTimeISL port-flap hold time in seconds. The default value is 0.rw Integer32 .1.3.6.1.4.1.47196.4.1.1.3.7.1.1.3 |
arubaWiredVsxIslHelloTimeoutISL hello timeout in seconds. The default value is 3.rw Integer32 .1.3.6.1.4.1.47196.4.1.1.3.7.1.1.4 |
arubaWiredVsxIslSystemIDDevice identifier. This is advertised over ISL.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.7.1.1.5 |
arubaWiredVsxIslPlatformNameDevice type. This is advertised over ISL.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.7.1.1.6 |
arubaWiredVsxIslSwVersionS/W version running on the device type. This is advertised over ISL.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.7.1.1.7 |
arubaWiredVsxIslVIDListVLAN IDs that the ISL port is a member of.ro VidList .1.3.6.1.4.1.47196.4.1.1.3.7.1.1.8 |
arubaWiredVsxKeepAliveConfig OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.7.1.2 |
arubaWiredVsxKeepAliveSrcIPAddrTypeThe KeepAlive source address type. It can be IPv4 or IPv6.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.47196.4.1.1.3.7.1.2.1 |
arubaWiredVsxKeepAliveSrcIPAddrThe KeepAlive source address. It can be IPv4 or IPv6.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.47196.4.1.1.3.7.1.2.2 |
arubaWiredVsxKeepAliveVrfThe KeepAlive VRF domain.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.7.1.2.3 |
arubaWiredVsxKeepAliveUdpPortThe KeepAlive UDP port. Same port is used as source and destination UDP ports.rw Integer32 .1.3.6.1.4.1.47196.4.1.1.3.7.1.2.4 |
arubaWiredVsxKeepAlivePeerIPAddrTypeThe KeepAlive peer address type. It can be IPv4 or IPv6.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.47196.4.1.1.3.7.1.2.5 |
arubaWiredVsxKeepAlivePeerIPAddrThe KeepAlive peer address. It can be IPv4 or IPv6.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.47196.4.1.1.3.7.1.2.6 |
arubaWiredVsxKeepAliveHelloIntervalKeepAlive hello interval in seconds. The default value is 1.rw Integer32 .1.3.6.1.4.1.47196.4.1.1.3.7.1.2.7 |
arubaWiredVsxKeepAliveHelloTimeoutKeepAlive hello timeout in seconds. The default value is 3.rw Integer32 .1.3.6.1.4.1.47196.4.1.1.3.7.1.2.8 |
arubaWiredVsxKeepAliveSystemIDDevice identifier that will be advertised via KeepAlive protocol.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.7.1.2.9 |
arubaWiredVsxKeepAlivePlatformNameDevice type that will be advertised via KeepAlive protocol.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.7.1.2.10 |
arubaWiredVsxKeepAliveSwVersionS/W version that will be advertised via KeepAlive protocol.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.7.1.2.11 |
arubaWiredVsxAggregatorConfig OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.7.1.3 |
arubaWiredVsxAggregatorTableThis table supplements the table 'dot3adAggTable' in ieee802.3ad mib. SEQUENCE OF ArubaWiredVsxAggregatorEntry .1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1 |
arubaWiredVsxAggregatorEntryThe fields in this entry will be used to supplement fields of dot3adAggEntry in ieee802.3ad mib. ArubaWiredVsxAggregatorEntry .1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1 |
arubaWiredVsxAggregatorIndexThe unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects of the containing object. This value is read-only. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.1 |
arubaWiredVsxAggregatorTypeThis field specifies the aggregator/lag type.rw Enumeration .1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.2 |
arubaWiredVsxVlanListVLANs that this aggregator is a member of. This is used for configuration consistency validation.ro VidList .1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.3 |
arubaWiredVsxLoopProtectEnabledLoop Protect protocol admin state for this VSX. This is used for configuration consistency validation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.4 |
arubaWiredVsxLoadBalanceSchemeLoad balance scheme configured for this VSX. This is used for configuration consistency validation.ro Enumeration .1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.5 |
arubaWiredVsxCosOverrideCoS override configuration for this VSX. This is used for configuration consistency validation.ro INTEGER .1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.6 |
arubaWiredVsxDscpOverrideDSCP override configuration for this VSX. This is used for configuration consistency validation.ro INTEGER .1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.7 |
arubaWiredVsxQoSTrustPort QoS trust mode configured for this VSX. This is used for configuration consistency validation.ro Enumeration .1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.8 |
arubaWiredVsxGlobalConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.7.1.4 |
arubaWiredVsxDeviceRoleVSX device role.ro Enumeration .1.3.6.1.4.1.47196.4.1.1.3.7.1.4.1 |
arubaWiredVsxConfigSyncVSX config sync.ro Enumeration .1.3.6.1.4.1.47196.4.1.1.3.7.1.4.2 |
arubaWiredVsxStatus OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.7.2 |
arubaWiredVsxIslStatus OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.7.2.1 |
arubaWiredVsxIslOperStateISL operational state.ro Enumeration .1.3.6.1.4.1.47196.4.1.1.3.7.2.1.1 |
arubaWiredVsxIslPduTxNumber of ISL PDUs transmitted by this device.ro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.7.2.1.2 |
arubaWiredVsxIslPduRxNumber of ISL PDUs received by this device.ro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.7.2.1.3 |
arubaWiredVsxIslHelloTxNumber of ISL Hello packets transmitted by this device.ro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.7.2.1.4 |
arubaWiredVsxIslHelloRxNumber of ISL Hello packets received by this device.ro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.7.2.1.5 |
arubaWiredVsxDeviceOperSystemIDSystem identifier used by this device - derived from system identifier values of the 2 devices.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.7.2.1.6 |
arubaWiredVsxKeepAliveStatus OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.7.2.2 |
arubaWiredVsxKeepAliveOperStateKeepAlive protocol operational state.ro Enumeration .1.3.6.1.4.1.47196.4.1.1.3.7.2.2.1 |
arubaWiredVsxKeepAlivePacketsTxNumber of KeepAlive protocol packets transmitted by this device.ro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.7.2.2.2 |
arubaWiredVsxKeepAlivePacketsRxNumber of KeepAlive protocol packets received by this device.ro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.7.2.2.3 |
arubaWiredVsxKeepAlivePacketsDropNumber of KeepAlive protocol packets dropped.ro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.7.2.2.4 |
arubaWiredVsxKeepAliveTimeoutCountNumber of times KeepAlive protocol went to failed state because of KeepAlive timer expiry.ro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.7.2.2.5 |
arubaWiredVsxKeepAliveLastEstablishedTimeStores the most recent time KeepAlive handshake was successful and a value of 0 indicates KeepAlive handshake was never established.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.47196.4.1.1.3.7.2.2.6 |
arubaWiredVsxKeepAliveLastFailedTimeStores the most recent time KeepAlive handshake failed and a value of 0 indicates KeepAlive handshake never failed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.47196.4.1.1.3.7.2.2.7 |
arubaWiredVsxNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.7.3 |
arubaWiredVsxTraps OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.7.3.1 |
islUpAn islUp trap signifies that ISL transitioned to inSync state NOTIFICATION-TYPE .1.3.6.1.4.1.47196.4.1.1.3.7.3.1.1 |
islDownAn islDown trap signifies that ISL transitioned to outOfSync state NOTIFICATION-TYPE .1.3.6.1.4.1.47196.4.1.1.3.7.3.1.2 |
keepAliveUpA keepAliveUp trap signifies that KA is in established state NOTIFICATION-TYPE .1.3.6.1.4.1.47196.4.1.1.3.7.3.1.3 |
keepAliveDownA keepAliveDown trap signifies that KA is in failed state NOTIFICATION-TYPE .1.3.6.1.4.1.47196.4.1.1.3.7.3.1.4 |
More MIBs from HPE/Aruba Networking Division
Browse all HPE/Aruba Networking DivisionMIBs →The ARUBAWIRED-NETWORKING-OID MIB module provides proprietary extensions for monitoring HPE Aruba Networking hardware, enabling the retrieval of device-specific operational metrics, interface statistics, and system health indicators not covered by standard SNMP MIBs.
The ARUBAWIRED-MGMD-SNOOPING-MIB enables monitoring and management of Multicast Group Management Daemon (MGMD) snooping configurations and state metrics on HPE Aruba wired network switches. This module provides visibility into multicast group memberships, snooping table entries, and interface-specific filtering states to optimize Layer 2 multicast traffic forwarding.
The ARUBAWIRED-PM-MIB enables SNMP-based monitoring and management of pluggable optical transceivers and SFP modules on Aruba wired network infrastructure, exposing critical telemetry such as optical power levels, laser bias currents, temperature, and voltage status for hardware health verification.
The ARUBAWIRED-RPVST-MIB module enables monitoring and management of Rapid Per-VLAN Spanning Tree (RPVST) protocol states, port roles, and topology changes on Aruba wired network switches. It provides visibility into VLAN-specific spanning tree instances, including root bridge election, port blocking/forwarding status, and BPDU transmission metrics for each configured VLAN.
The ARUBAWIRED-LLDP-MIB enables monitoring of Link Layer Discovery Protocol (LLDP) objects specifically for Power Source Equipment (PSE) capabilities on HPE Aruba wired network devices. This module facilitates the retrieval of power negotiation parameters, such as Power via MDI (802.3af/at) status and allocated power levels, to manage PoE distribution and device connectivity.
The ARUBAWIRED-VSFv2-MIB enables SNMP-based monitoring and configuration of ArubaOS-Switch Virtual Switching Framework (VSF) stacks, specifically tracking VSF member status, synchronization states, topology consistency, and link aggregation parameters. It provides granular visibility into the operational health and logical grouping of switches within a VSF domain to facilitate high-availability cluster management.