APPIAN-PPORT-DS3-MIB
AI MIB Summary
The APPIAN-PPORT-DS3-MIB enables monitoring and management of DS3 interface statistics, status, and configuration parameters on Appian Communications OSAP2k platforms. This module provides vendor-specific tables for tracking DS3 physical layer metrics, such as line coding, framing, and error counts, which are isolated to individual OSAP instances rather than shared across the system.
The is the MIB module that describes DS3 interfaces and objects for Appian Communications OSAP2k platforms. The tables in this DS3 mib are NOT SHARED between OSAPs.
Main OID:
acDs3.1.3.6.1.4.1.2785.2.3.5
167
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
167 total| Object Name |
|---|
acDs3The is the MIB module that describes DS3 interfaces and objects for Appian Communications OSAP2k platforms. The tables in this DS3 mib are NOT SHARED between OSAPs. MODULE-IDENTITY .1.3.6.1.4.1.2785.2.3.5 |
acDs3Traps OBJECT IDENTIFIER .1.3.6.1.4.1.2785.2.3.5.0 |
acDs3LineStatusChangeAn acLogcialDs3LineStatusChange trap is sent when the value of an instance acDs3ConfigLineStatus changes. It can be utilized by an NMS to trigger polls. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.1 |
acDs3StatsResetTrapThe Ds3 statistics for this interface have been reset to zero (0) which may effect long term trending functions monitoring this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.2 |
acDs3CfgErrorTrapA configuration request to the Ds3 configuration table for an interface has been detected as invalid or corrupt. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.3 |
acDs3LinkDownTrapThe link for this ds3 interface has obtained sync. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.4 |
acDs3LinkUpTrapThe link for this ds3 interface has lost sync. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.5 |
acDs3ExceededThresholdNEIntervalPESsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.6 |
acDs3ExceededThresholdNEIntervalPSESsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.7 |
acDs3ExceededThresholdNEIntervalSEFSsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.8 |
acDs3ExceededThresholdNEIntervalUASsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.9 |
acDs3ExceededThresholdNEIntervalLCVsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.10 |
acDs3ExceededThresholdNEIntervalPCVsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.11 |
acDs3ExceededThresholdNEIntervalLESsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.12 |
acDs3ExceededThresholdNEIntervalCCVsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.13 |
acDs3ExceededThresholdNEIntervalCESsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.14 |
acDs3ExceededThresholdNEIntervalCSESsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.15 |
acDs3ExceededThresholdNEDayPESsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.16 |
acDs3ExceededThresholdNEDayPSESsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.17 |
acDs3ExceededThresholdNEDaySEFSsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.18 |
acDs3ExceededThresholdNEDayUASsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.19 |
acDs3ExceededThresholdNEDayLCVsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.20 |
acDs3ExceededThresholdNEDayPCVsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.21 |
acDs3ExceededThresholdNEDayLESsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.22 |
acDs3ExceededThresholdNEDayCCVsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.23 |
acDs3ExceededThresholdNEDayCESsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.24 |
acDs3ExceededThresholdNEDayCSESsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.25 |
acDs3ExceededThresholdFEIntervalCESsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.26 |
acDs3ExceededThresholdFEIntervalCSESsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.27 |
acDs3ExceededThresholdFEIntervalCCVsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.28 |
acDs3ExceededThresholdFEIntervalUASsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.29 |
acDs3ExceededThresholdFEDayCESsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.30 |
acDs3ExceededThresholdFEDayCSESsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.31 |
acDs3ExceededThresholdFEDayCCVsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.32 |
acDs3ExceededThresholdFEDayUASsTrapThe threshold specified has been exceeded on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.5.0.33 |
acDs3ConfigTableThe Appian DS3 Configuration table. This table is created by EMS/CLI. SEQUENCE OF AcDs3ConfigEntry .1.3.6.1.4.1.2785.2.3.5.1 |
acDs3ConfigEntryAn entry in the Appian DS3 Configuration table. AcDs3ConfigEntry .1.3.6.1.4.1.2785.2.3.5.1.1 |
acDs3ConfigNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.1.1.1 |
acDs3ConfigSlotThe physical slot number for the port.ro AcSlotNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.1.1.2 |
acDs3ConfigPortThe physical port number for the port.ro AcPortNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.1.1.3 |
acDs3ConfigAdminStatusAppian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Refer to the Appian-SMI.mib file for additional information.rw AcAdminStatus (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.1.1.4 |
acDs3ConfigOpStatusThe operational or actual state of this DS3.rw AcOpStatus (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.1.1.5 |
acDs3ConfigTypeThe field defines the type of DS3 port that this instance configures. The type can be either Access or Network.ro Enumeration .1.3.6.1.4.1.2785.2.3.5.1.1.6 |
acDs3ConfigTimeElapsedIntervalThe number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.2785.2.3.5.1.1.7 |
acDs3ConfigValidIntervalsThe number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.ro INTEGER .1.3.6.1.4.1.2785.2.3.5.1.1.8 |
acDs3ConfigTimeElapsedDayThe number of seconds that have elapsed since the beginning of the near end current day error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.2785.2.3.5.1.1.9 |
acDs3ConfigValidDaysThe number of previous near end intervals for which data was collected. The value will be 30 unless the interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hour near end days since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.ro INTEGER .1.3.6.1.4.1.2785.2.3.5.1.1.10 |
acDs3ConfigTimeElapsedFarEndIntervalThe number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.2785.2.3.5.1.1.11 |
acDs3ConfigValidFarEndIntervalsThe number of previous far end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute far end intervals since the interface has been online.ro INTEGER .1.3.6.1.4.1.2785.2.3.5.1.1.12 |
acDs3ConfigTimeElapsedFarEndDayThe number of seconds that have elapsed since the beginning of the far end current day error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current day exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.2785.2.3.5.1.1.13 |
acDs3ConfigValidFarEndDaysThe number of previous far end days for which data was collected. The value will be 30 unless the interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hour far end days since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.ro INTEGER .1.3.6.1.4.1.2785.2.3.5.1.1.14 |
acDs3ConfigLineTypeThis variable indicates the variety of DS3 C-bit application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps. The ds3ClearChannel value means that the C-bits are not used except for sending/ receiving AIS. The values, in sequence, describe: TITLE: SPECIFICATION: ds3M23 ANSI T1.107-1988 [9] ds3SYNTRAN ANSI T1.107-1988 [9] ds3CbitParity ANSI T1.107a-1990 [9a] ds3ClearChannel ANSI T1.102-1987 [8]rw Enumeration .1.3.6.1.4.1.2785.2.3.5.1.1.15 |
acDs3ConfigLineCodingThis variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. ds3B3ZS and e3HDB3 refer to the use of specified patterns of normal bits and bipolar violations which are used to replace sequences of zero bits of a specified length.rw Enumeration .1.3.6.1.4.1.2785.2.3.5.1.1.16 |
acDs3ConfigSendCodeThis variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the interface to begin sending the code requested. The values mean: ds3SendNoCode sending looped or normal data ds3SendLineCode sending a request for a line loopback ds3SendPayloadCode sending a request for a payload loopback (i.e., all DS1/E1s in a DS3 frame) ds3SendResetCode sending a loopback deactivation request ds3SendTestPattern sending a test pattern.rw Enumeration .1.3.6.1.4.1.2785.2.3.5.1.1.17 |
acDs3ConfigCircuitIdentifierThis variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.rw DisplayString .1.3.6.1.4.1.2785.2.3.5.1.1.18 |
acDs3ConfigLoopbackConfigThis variable represents the desired loopback configuration of the DS3 interface. The values mean: ds3NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. ds3PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. ds3LineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. ds3OtherLoop Loopbacks that are not defined here. ds3InwardLoop The sent signal at this interface is looped back through the device.rw Enumeration .1.3.6.1.4.1.2785.2.3.5.1.1.19 |
acDs3ConfigLineStatusThis variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The ds3LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures and a loopback (see acDs3LoopbackConfig object for the type of loopback) simultaneously. The ds3NoAlarm must be set if and only if no other flag is set. If the ds3loopbackState bit is set, the loopback in effect can be determined from the ds3loopbackConfig object. The various bit positions are: 1 ds3NoAlarm No alarm present 2 ds3RcvRAIFailure Receiving Yellow/Remote Alarm Indication 4 ds3XmitRAIAlarm Transmitting Yellow/Remote Alarm Indication 8 ds3RcvAIS Receiving AIS failure state 16 ds3XmitAIS Transmitting AIS 32 ds3LOF Receiving LOF failure state 64 ds3LOS Receiving LOS failure state 128 ds3LoopbackState Looping the received signal 256 ds3RcvTestCode Receiving a Test Pattern 512 ds3OtherFailure any line status not defined here 1024 ds3UnavailSigState Near End in Unavailable Signal State 2048 ds3NetEquipOOS Carrier Equipment Out of Servicero INTEGER .1.3.6.1.4.1.2785.2.3.5.1.1.20 |
acDs3ConfigTransmitClockSourceThe source of Transmit Clock. loopTiming indicates that the recovered receive clock is used as the transmit clock. localTiming indicates that a local clock source is used or that an external clock is attached to the box containing the interface. throughTiming indicates that transmit clock is derived from the recovered receive clock of another DS3 interface.rw Enumeration .1.3.6.1.4.1.2785.2.3.5.1.1.21 |
acDs3ConfigInvalidIntervalsThe number of intervals in the range from 0 to acDs3ConfigValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.2785.2.3.5.1.1.22 |
acDs3ConfigInvalidDaysThe number of days in the range from 0 to acDs3ConfigValidDays for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.2785.2.3.5.1.1.23 |
acDs3ConfigInvalidFarEndIntervalsThe number of intervals in the range from 0 to acDs3ConfigValidFarEndIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.2785.2.3.5.1.1.24 |
acDs3ConfigInvalidFarEndDaysThe number of days in the range from 0 to acDs3ConfigValidFarEndDays for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.2785.2.3.5.1.1.25 |
acDs3ConfigLineLengthThe length of the ds3 line in meters. This object provides information for line build out circuitry if it exists and can use this object to adjust the line build out.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.1.1.26 |
acDs3ConfigLineStatusLastChangeThe value of MIB II's sysUpTime object at the time this DS3 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.5.1.1.27 |
acDs3ConfigLineStatusChangeTrapEnableIndicates whether acDs3ConfigLineStatusChange traps should be generated for this interface.rw Enumeration .1.3.6.1.4.1.2785.2.3.5.1.1.28 |
acDs3ConfigLoopbackStatusThis variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely from the far end. The acDs3ConfigLoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 ds3NoLoopback 2 ds3NearEndPayloadLoopback 4 ds3NearEndLineLoopback 8 ds3NearEndOtherLoopback 16 ds3NearEndInwardLoopback 32 ds3FarEndPayloadLoopback 64 ds3FarEndLineLoopbackro INTEGER .1.3.6.1.4.1.2785.2.3.5.1.1.29 |
acDs3ConfigChannelizationIndicates whether this ds3/e3 is channelized or unchannelized. The value of enabledDs1 indicates that this is a DS3 channelized into DS1s. The value of enabledDs3 indicated that this is a DS3 channelized into DS2s.rw Enumeration .1.3.6.1.4.1.2785.2.3.5.1.1.30 |
acDs3ConfigDs1ForRemoteLoopIndicates which ds1/e1 on this ds3/e3 will be indicated in the remote ds1 loopback request. A value of 0 means no DS1 will be looped. A value of 29 means all ds1s/e1s will be looped.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.1.1.31 |
acDs3ConfigFarEndEquipCodeThis is the Far End Equipment Identification code that describes the specific piece of equipment. It is sent within the Path Identification Message (C-bits) from the remote end.ro DisplayString .1.3.6.1.4.1.2785.2.3.5.1.1.32 |
acDs3ConfigFarEndLocationIDCodeThis is the Far End Location Identification code that describes the specific location of the equipment. It is sent within the Path Identification Message (C-bits) from the remote end.ro DisplayString .1.3.6.1.4.1.2785.2.3.5.1.1.33 |
acDs3ConfigFarEndFrameIDCodeThis is the Far End Frame Identification code that identifies where the equipment is located within a building at a given location. It is sent within the Path Identification Message (C-bits) from the remote end.ro DisplayString .1.3.6.1.4.1.2785.2.3.5.1.1.34 |
acDs3ConfigFarEndUnitCodeThis is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message (C-bits) from the remote end.ro DisplayString .1.3.6.1.4.1.2785.2.3.5.1.1.35 |
acDs3ConfigFarEndFacilityIDCodeThis code identifies a specific Far End DS3 path. It is sent within the Path Identification Message (C-bits) from the remote end.ro DisplayString .1.3.6.1.4.1.2785.2.3.5.1.1.36 |
acDs3ConfigInterfaceNameA user configurable interface name which uniquely identifies this physical interface. The name can be up to 64 bytes in length.rw DisplayString .1.3.6.1.4.1.2785.2.3.5.1.1.37 |
acDs3IntervalTableThe Appian DS3 Interval Table contains various statistics collected by the DS3 Interface over the previous 24 hours of operation as well as over the current period. The past 24 hours are broken into 96 completed 15 minute intervals. The first row in this table (identified by acDs3IntervalNumber=1) represents the current interval statistics. The next 96 rows of this table (represented by acDs3IntervalNubmer=2..97) represents one of the past 15 minute intervals. The final row (identified by acDs3IntervalNumber=98) is the total of all the past intervals (2..97). This table is created automatically. SEQUENCE OF AcDs3IntervalEntry .1.3.6.1.4.1.2785.2.3.5.2 |
acDs3IntervalEntryAn entry in the Appian DS3 Interval table. AcDs3IntervalEntry .1.3.6.1.4.1.2785.2.3.5.2.1 |
acDs3IntervalNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.2.1.1 |
acDs3IntervalSlotThe physical slot number for the port.ro AcSlotNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.2.1.2 |
acDs3IntervalPortThe physical port number for the port.ro AcPortNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.2.1.3 |
acDs3IntervalNumberA number between 1 and 98, where 1 is the current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total of all the completed intervals (2..97).ro INTEGER .1.3.6.1.4.1.2785.2.3.5.2.1.4 |
acDs3IntervalValidStatsThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.5.2.1.5 |
acDs3IntervalResetStatsThis variable allows the data from the current interval (acDs3IntervalIndex=1) to be reset. The acDs3IntervalValidFlag will be set to False after the reset for the current interval. This field has no effect on acDs3IntervalIndex=2..98. This field will always show a value of False when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.5.2.1.6 |
acDs3IntervalPESsThe counter associated with the number of P-bit Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.2.1.7 |
acDs3IntervalPSESsThe counter associated with the number of P-bit Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.2.1.8 |
acDs3IntervalSEFSsThe counter associated with the number of Severely Errored Framing Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.2.1.9 |
acDs3IntervalUASsThe counter associated with the number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.2.1.10 |
acDs3IntervalLCVsThe counter associated with the number of Line Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.2.1.11 |
acDs3IntervalPCVsThe counter associated with the number of P-bit Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.2.1.12 |
acDs3IntervalLESsThe number of Line Errored Seconds (BPVs or illegal zero sequences).ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.2.1.13 |
acDs3IntervalCCVsThe number of C-bit Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.2.1.14 |
acDs3IntervalCESsThe number of C-bit Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.2.1.15 |
acDs3IntervalCSESsThe number of C-bit Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.2.1.16 |
acDs3DayTableThe Appian DS3 Day Table contains various statistics collected by the DS3 Interface over the previous 30 days of operation as well as over the current day period. The first row in this table (identified by acDs3DayNumber=1) represents the current day statistics. The next 30 rows of this table (represented by acDs3DayNubmer=2..31) represents one of the 24 hour day intervals. This table is created automatically. SEQUENCE OF AcDs3DayEntry .1.3.6.1.4.1.2785.2.3.5.3 |
acDs3DayEntryAn entry in the Appian DS3 Day table. AcDs3DayEntry .1.3.6.1.4.1.2785.2.3.5.3.1 |
acDs3DayNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.3.1.1 |
acDs3DaySlotThe physical slot number for the port.ro AcSlotNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.3.1.2 |
acDs3DayPortThe physical port number for the port.ro AcPortNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.3.1.3 |
acDs3DayNumberA number between 1 and 31, where 1 is the current 24 hour day interval in progress, 2 is the most recently completed 24 hour day interval and 31 is the 24 hour day interval completed 29 days prior to interval 2.ro INTEGER .1.3.6.1.4.1.2785.2.3.5.3.1.4 |
acDs3DayValidStatsThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.5.3.1.5 |
acDs3DayResetStatsThis variable allows the data from the day (acDs3DayIndex=1) to be reset. The acDs3DayValidFlag will be set to False after the reset for the current day. This field has no effect on acDs3DayIndex=2..31. This field will always show a value of False when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.5.3.1.6 |
acDs3DayPESsThe counter associated with the number of P-bit Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.3.1.7 |
acDs3DayPSESsThe counter associated with the number of P-bit Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.3.1.8 |
acDs3DaySEFSsThe counter associated with the number of Severely Errored Framing Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.3.1.9 |
acDs3DayUASsThe counter associated with the number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.3.1.10 |
acDs3DayLCVsThe counter associated with the number of Line Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.3.1.11 |
acDs3DayPCVsThe counter associated with the number of P-bit Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.3.1.12 |
acDs3DayLESsThe number of Line Errored Seconds (BPVs or illegal zero sequences).ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.3.1.13 |
acDs3DayCCVsThe number of C-bit Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.3.1.14 |
acDs3DayCESsThe number of C-bit Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.3.1.15 |
acDs3DayCSESsThe number of C-bit Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.3.1.16 |
acDs3FarEndIntervalTableThe Appian DS3 Far End Interval Table contains various statistics collected by each DS3 Interface over the previous 24 hours of operation as well as over the current period. The past 24 hours are broken into 96 completed 15 minute intervals. The first row in this table (identified by acDs3FarEndIntervalNumber=1) represents the current interval statistics. The next 96 rows in this table (represented by acDs3FarEndIntervalNumber=2..97) represents one of the past 15 minute intervals. The final row (identified by acDs3FarEndIntervalNumber=98) is the total of all the past intervals (2..97). This table is created automatically. SEQUENCE OF AcDs3FarEndIntervalEntry .1.3.6.1.4.1.2785.2.3.5.4 |
acDs3FarEndIntervalEntryAn entry in the DS3 Far End Interval table. AcDs3FarEndIntervalEntry .1.3.6.1.4.1.2785.2.3.5.4.1 |
acDs3FarEndIntervalNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.4.1.1 |
acDs3FarEndIntervalSlotThe physical slot number for the port.ro AcSlotNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.4.1.2 |
acDs3FarEndIntervalPortThe physical port number for the port.ro AcPortNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.4.1.3 |
acDs3FarEndIntervalNumberA number between 1 and 96, where 1 is the current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total of all completed intervals (2..97).ro INTEGER .1.3.6.1.4.1.2785.2.3.5.4.1.4 |
acDs3FarEndIntervalValidStatsThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.5.4.1.5 |
acDs3FarEndIntervalResetStatsThis variable allows the data for the current interval (acDs3FarEndIntervalIndex=1) to be reset. The acSdx3FarEndIntervalValidFlag will be set to False after the reset for the current interval. This field has no effect on acDs3FarEndIntervalIndex 2..98. This field will always show a vluae of false when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.5.4.1.6 |
acDs3FarEndIntervalCESsThe counter associated with the number of Far End C-bit Errored Seconds encountered by a DS3 interface. In the case where the agent is a proxy and data is not available, return noSuchInstance.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.4.1.7 |
acDs3FarEndIntervalCSESsThe counter associated with the number of Far End C-bit Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.4.1.8 |
acDs3FarEndIntervalCCVsThe counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.4.1.9 |
acDs3FarEndIntervalUASsThe counter associated with the number of Far End unavailable seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.4.1.10 |
acDs3FarEndDayTableThe Appian DS3 Far End Day Table contains various statistics collected by each DS3 Interface over the previous 30 days of operation as well as over the current period. The first row in this table (identified by acDs3FarEndDayNumber=1) represents the current day statistics. The next 30 rows in this table (represented by acDs3FarEndDayNumber=2..31) represents one of the past 24 hour days. This table is created automatically. SEQUENCE OF AcDs3FarEndDayEntry .1.3.6.1.4.1.2785.2.3.5.5 |
acDs3FarEndDayEntryAn entry in the DS3 Far End Day table. AcDs3FarEndDayEntry .1.3.6.1.4.1.2785.2.3.5.5.1 |
acDs3FarEndDayNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.5.1.1 |
acDs3FarEndDaySlotThe physical port number for the port.ro AcSlotNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.5.1.2 |
acDs3FarEndDayPortThe physical port number for the port.ro AcPortNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.5.1.3 |
acDs3FarEndDayNumberA number between 1 and 31, where 1 is the current 24 hour day interval in progress, 2 is the most recently completed 24 hour day and 31 is the 24 hour day 29 days prior to interval 2.ro INTEGER .1.3.6.1.4.1.2785.2.3.5.5.1.4 |
acDs3FarEndDayValidStatsThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.5.5.1.5 |
acDs3FarEndDayResetStatsThis variable allows the data for the current interval (acDs3FarEndDayIndex=1) to be reset. The acDs3FarEndDayValidFlag will be set to False after the reset for the current day. This field has no effect on acDs3FarEndDayIndex 2..31. This field will always show a vluae of false when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.5.5.1.6 |
acDs3FarEndDayCESsThe counter associated with the number of Far End C-bit Errored Seconds encountered by a DS3 interface. In the case where the agent is a proxy and data is not available, return noSuchInstance.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.5.1.7 |
acDs3FarEndDayCSESsThe counter associated with the number of Far End C-bit Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.5.1.8 |
acDs3FarEndDayCCVsThe counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.5.1.9 |
acDs3FarEndDayUASsThe counter associated with the number of Far End unavailable seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.5.5.1.10 |
acDs3ThresholdTableThe Appian DS3 Threshold Table allows the user to configure the threshold values for each of the statistics found in the interval table base on the 15 minute interval on the day. This table is created automatically. SEQUENCE OF AcDs3ThresholdEntry .1.3.6.1.4.1.2785.2.3.5.6 |
acDs3ThresholdEntryAn entry in the Appian DS1 Threshold table. AcDs3ThresholdEntry .1.3.6.1.4.1.2785.2.3.5.6.1 |
acDs3ThresholdNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.6.1.1 |
acDs3ThresholdSlotThe physical slot number for the port.ro AcSlotNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.6.1.2 |
acDs3ThresholdPortThe physical port number for the port.ro AcPortNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.5.6.1.3 |
acDs3ThresholdNEIntervalPESsThe threshold value for near end interval number of P-Bit Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.4 |
acDs3ThresholdNEIntervalPSESsThe threshold value for the near end interval number of P-Bit Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.5 |
acDs3ThresholdNEIntervalSEFSsThe threshold for the near end interval number of Severely Errored Framing Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.6 |
acDs3ThresholdNEIntervalUASsThe threshold for the near end interval number of Unavailable Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.7 |
acDs3ThresholdNEIntervalLCVsThe threshold for the near end interval number of Line Coding Violations. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.8 |
acDs3ThresholdNEIntervalPCVsThe threshold for the near end interval number of Path Coding Violations. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.9 |
acDs3ThresholdNEIntervalLESsThe threshold value for the near end interval number of Line Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.10 |
acDs3ThresholdNEIntervalCCVsThe threshold for the near end interval number of C-Bit Coding Violations. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.11 |
acDs3ThresholdNEIntervalCESsThe threshold for the near end interval number of C-Bit Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.12 |
acDs3ThresholdNEIntervalCSESsThe threshold for the near end interval number of C-Bit Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.13 |
acDs3ThresholdNEDayPESsThe threshold value for near end day number of P-Bit Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.14 |
acDs3ThresholdNEDayPSESsThe threshold for the near end day number of P-Bit Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.15 |
acDs3ThresholdNEDaySEFSsThe threshold value for the near end day number of Severely Errored Framing Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.16 |
acDs3ThresholdNEDayUASsThe threshold value for the near end day number of Unavailable Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.17 |
acDs3ThresholdNEDayLCVsThe threshold for the near end day number of Line Coding Violations. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.18 |
acDs3ThresholdNEDayPCVsThe threshold value for the near end day number of Path Coding Violations. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.19 |
acDs3ThresholdNEDayLESsThe threshold for the near end day number of Line Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.20 |
acDs3ThresholdNEDayCCVsThe threshold for the near end day number of C-Bit Coding Violations. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.21 |
acDs3ThresholdNEDayCESsThe threshold for the near end day number of C-Bit Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.22 |
acDs3ThresholdNEDayCSESsThe threshold for the near end day number of C-Bit Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.23 |
acDs3ThresholdFEIntervalCESsThe threshold for the far end interval counter associated with the number of Far End C-bit Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.24 |
acDs3ThresholdFEIntervalCSESsThe threshold for the far end interval counter associated with the number of Far End C-bit Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.25 |
acDs3ThresholdFEIntervalCCVsThe threshold for the far end interval counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.26 |
acDs3ThresholdFEIntervalUASsThe threshold for the far end interval counter associated with the number of Far End unavailable seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.27 |
acDs3ThresholdFEDayCESsThe threshold for the far end day counter associated with the number of Far End C-bit Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.28 |
acDs3ThresholdFEDayCSESsThe threshold for the far end day counter associated with the number of Far End C-bit Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.29 |
acDs3ThresholdFEDayCCVsThe threshold for the far end day counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.30 |
acDs3ThresholdFEDayUASsThe threshold for the far end day counter associated with the number of Far End unavailable seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.5.6.1.31 |