APPIAN-LPORT-DS3-MIB
AI MIB Summary
The APPIAN-LPORT-DS3-MIB enables monitoring and management of DS3 physical layer interfaces and associated performance counters on Appian Communications OSAP2k platforms. It provides access to standard telecommunications metrics, including interface status, error statistics (such as CRC and framing errors), and traffic utilization data for DS3 circuits.
The is the MIB module that describes DS3 interfaces and objects for Appian Communications OSAP2k platforms.
Main OID:
acLogicalDs3.1.3.6.1.4.1.2785.2.4.3
153
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
153 total| Object Name |
|---|
acLogicalDs3The is the MIB module that describes DS3 interfaces and objects for Appian Communications OSAP2k platforms. MODULE-IDENTITY .1.3.6.1.4.1.2785.2.4.3 |
acLogicalDs3Traps OBJECT IDENTIFIER .1.3.6.1.4.1.2785.2.4.3.0 |
acLogicalDs3LineStatusChangeTrapAn acLogcialDs3LineStatusChange trap is sent when the value of an instance acLogicalDs3ConfigLineStatus changes. It can be utilized by an NMS to trigger polls. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.1 |
acLogicalDs3StatsResetTrapThe Logical Ds3 statistics for this interface have been reset to zero (0) which may effect long term trending functions monitoring this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.2 |
acLogicalDs3CfgErrorTrapA configuration request to the Logical Ds3 configuration table for an interface has been detected as invalid or corrupt. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.3 |
acLogicalDs3LinkDownTrapThe link for this ds3 interface has obtained sync. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.4 |
acLogicalDs3LinkUpTrapThe link for this ds3 interface has lost sync. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.5 |
acLogicalDs3ExceededThresholdNEIntervalPESsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.6 |
acLogicalDs3ExceededThresholdNEIntervalPSESsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.7 |
acLogicalDs3ExceededThresholdNEIntervalSEFSsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.8 |
acLogicalDs3ExceededThresholdNEIntervalUASsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.9 |
acLogicalDs3ExceededThresholdNEIntervalLCVsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.10 |
acLogicalDs3ExceededThresholdNEIntervalPCVsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.11 |
acLogicalDs3ExceededThresholdNEIntervalLESsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.12 |
acLogicalDs3ExceededThresholdNEIntervalCCVsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.13 |
acLogicalDs3ExceededThresholdNEIntervalCESsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.14 |
acLogicalDs3ExceededThresholdNEIntervalCSESsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.15 |
acLogicalDs3ExceededThresholdNEDayPESsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.16 |
acLogicalDs3ExceededThresholdNEDayPSESsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.17 |
acLogicalDs3ExceededThresholdNEDaySEFSsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.18 |
acLogicalDs3ExceededThresholdNEDayUASsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.19 |
acLogicalDs3ExceededThresholdNEDayLCVsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.20 |
acLogicalDs3ExceededThresholdNEDayPCVsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.21 |
acLogicalDs3ExceededThresholdNEDayLESsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.22 |
acLogicalDs3ExceededThresholdNEDayCCVsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.23 |
acLogicalDs3ExceededThresholdNEDayCESsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.24 |
acLogicalDs3ExceededThresholdNEDayCSESsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.25 |
acLogicalDs3ExceededThresholdFEIntervalCESsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.26 |
acLogicalDs3ExceededThresholdFEIntervalCSESsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.27 |
acLogicalDs3ExceededThresholdFEIntervalCCVsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.28 |
acLogicalDs3ExceededThresholdFEIntervalUASsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.29 |
acLogicalDs3ExceededThresholdFEDayCESsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.30 |
acLogicalDs3ExceededThresholdFEDayCSESsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.31 |
acLogicalDs3ExceededThresholdFEDayCCVsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.32 |
acLogicalDs3ExceededThresholdFEDayUASsTrapThe threshold value has been exceeded for the specified interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.3.0.33 |
acLogicalDs3ConfigTableThe Appian Logical DS3 Configuration table. This table is created by the EMS or CLI. SEQUENCE OF AcDs3ConfigEntry .1.3.6.1.4.1.2785.2.4.3.1 |
acLogicalDs3ConfigEntryAn entry in the Appian Logical DS3 Configuration table. AcDs3ConfigEntry .1.3.6.1.4.1.2785.2.4.3.1.1 |
acLogicalDs3ConfigNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.4.3.1.1.1 |
acLogicalDs3ConfigIndexThis value for this object is equal to the value of index from the Time Slot Table that this DS3 corresponds. The number can be a value between 1 and 65535 (64k - 1).ro INTEGER .1.3.6.1.4.1.2785.2.4.3.1.1.2 |
acLogicalDs3ConfigAdminStatusAppian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Refer to the Appian-SMI.mib file for additional information.rw AcAdminStatus (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.4.3.1.1.3 |
acLogicalDs3ConfigTimeElapsedIntervalThe number of seconds that have elapsed since the beginning of the near end current error measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.1.1.4 |
acLogicalDs3ConfigValidIntervalsThe number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.1.1.5 |
acLogicalDs3ConfigTimeElapsedDayThe number of seconds that have elapsed since the beginning of the near end current day error measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.1.1.6 |
acLogicalDs3ConfigValidDaysThe number of previous near end intervals for which data was collected. The value will be 30 unless the interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hour near end days since the interface has been online.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.1.1.7 |
acLogicalDs3ConfigTimeElapsedFarEndIntervalThe number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.1.1.8 |
acLogicalDs3ConfigValidFarEndIntervalsThe number of previous far end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute far end intervals since the interface has been online.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.1.1.9 |
acLogicalDs3ConfigTimeElapsedFarEndDayThe number of seconds that have elapsed since the beginning of the far end current day error measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current day exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.1.1.10 |
acLogicalDs3ConfigValidFarEndDaysThe number of previous far end days for which data was collected. The value will be 30 unless the interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hour far end days since the interface has been online.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.1.1.11 |
acLogicalDs3ConfigSendCodeThis variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the interface to begin sending the code requested. The values mean: ds3SendNoCode sending looped or normal data ds3SendLineCode sending a request for a line loopback ds3SendPayloadCode sending a request for a payload loopback (i.e., all DS1s in a DS3 frame) ds3SendResetCode sending a loopback deactivation request ds3SendTestPattern sending a test pattern.rw Enumeration .1.3.6.1.4.1.2785.2.4.3.1.1.12 |
acLogicalDs3ConfigCircuitIdentifierThis variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.rw DisplayString .1.3.6.1.4.1.2785.2.4.3.1.1.13 |
acLogicalDs3ConfigLoopbackConfigThis variable represents the desired loopback configuration of the DS3 interface. The values mean: ds3NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. ds3PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. ds3LineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. ds3OtherLoop Loopbacks that are not defined here. ds3InwardLoop The sent signal at this interface is looped back through the device.rw Enumeration .1.3.6.1.4.1.2785.2.4.3.1.1.14 |
acLogicalDs3ConfigLineStatusThis variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The ds3LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures and a loopback (see acDs3LoopbackConfig object for the type of loopback) simultaneously. The acDs3NoAlarm must be set if and only if no other flag is set. If the acDs3ConfigloopbackState bit is set, the loopback in effect can be determined from the acDs3loopbackConfig object. The various bit positions are: 1 ds3NoAlarm No alarm present 2 ds3RcvRAIFailure Receiving Yellow/Remote Alarm Indication 4 ds3XmitRAIAlarm Transmitting Yellow/Remote Alarm Indication 8 ds3RcvAIS Receiving AIS failure state 16 ds3XmitAIS Transmitting AIS 32 ds3LOF Receiving LOF failure state 64 ds3LOS Receiving LOS failure state 128 ds3LoopbackState Looping the received signal 256 ds3RcvTestCode Receiving a Test Pattern 512 ds3OtherFailure any line status not defined here 1024 ds3UnavailSigState Near End in Unavailable Signal State 2048 ds3NetEquipOOS Carrier Equipment Out of Servicero INTEGER .1.3.6.1.4.1.2785.2.4.3.1.1.15 |
acLogicalDs3ConfigTransmitClockSourceThe source of Transmit Clock. For logicalDs3, the clock source will be throughTiming. loopTiming indicates that the recovered receive clock is used as the transmit clock. localTiming indicates that a local clock source is used or that an external clock is attached to the box containing the interface. throughTiming indicates that transmit clock is derived from the recovered receive clock of another DS3 interface.ro Enumeration .1.3.6.1.4.1.2785.2.4.3.1.1.16 |
acLogicalDs3ConfigInvalidIntervalsThe number of intervals in the range from 0 to acLogicalDs3ConfigValidIntervals for which no data is available. This object will typically be zero.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.1.1.17 |
acLogicalDs3ConfigInvalidDaysThe number of days in the range from 0 to acLogicalDs3ConfigValidDays for which no data is available. This object will typically be zero.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.1.1.18 |
acLogicalDs3ConfigInvalidFarEndIntervalsThe number of intervals in the range from 0 to acLogicalDs3ConfigValidFarEndIntervals for which no data is available. This object will typically be zero.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.1.1.19 |
acLogicalDs3ConfigInvalidFarEndDaysThe number of days in the range from 0 to acLogicalDs3ConfigValidFarEndDays for which no data is available. This object will typically be zero.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.1.1.20 |
acLogicalDs3ConfigLineStatusLastChangeThe value of MIB II's sysUpTime object at the time this DS3 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.3.1.1.21 |
acLogicalDs3ConfigLineStatusChangeTrapEnableIndicates whether acDs3ConfigLineStatusChange traps should be generated for this interface.rw Enumeration .1.3.6.1.4.1.2785.2.4.3.1.1.22 |
acLogicalDs3ConfigLoopbackStatusThis variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely from the far end. The acLogicalDs3ConfigLoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 ds3NoLoopback 2 ds3NearEndPayloadLoopback 4 ds3NearEndLineLoopback 8 ds3NearEndOtherLoopback 16 ds3NearEndInwardLoopback 32 ds3FarEndPayloadLoopback 64 ds3FarEndLineLoopbackro INTEGER .1.3.6.1.4.1.2785.2.4.3.1.1.23 |
acLogicalDs3ConfigFarEndEquipCodeThis is the Far End Equipment Identification code that describes the specific piece of equipment. It is sent within the Path Identification Message (C-bits) from the remote end.ro DisplayString .1.3.6.1.4.1.2785.2.4.3.1.1.24 |
acLogicalDs3ConfigFarEndLocationIDCodeThis is the Far End Location Identification code that describes the specific location of the equipment. It is sent within the Path Identification Message (C-bits) from the remote end.ro DisplayString .1.3.6.1.4.1.2785.2.4.3.1.1.25 |
acLogicalDs3ConfigFarEndFrameIDCodeThis is the Far End Frame Identification code that identifies where the equipment is located within a building at a given location. It is sent within the Path Identification Message (C-bits) from the remote end.ro DisplayString .1.3.6.1.4.1.2785.2.4.3.1.1.26 |
acLogicalDs3ConfigFarEndUnitCodeThis is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message (C-bits) from the remote end.ro DisplayString .1.3.6.1.4.1.2785.2.4.3.1.1.27 |
acLogicalDs3ConfigFarEndFacilityIDCodeThis code identifies a specific Far End DS3 path. It is sent within the Path Identification Message (C-bits) from the remote end.ro DisplayString .1.3.6.1.4.1.2785.2.4.3.1.1.28 |
acLogicalDs3IntervalTableThe Appian Logical DS3 Interval Table contains various statistics collected by the DS3 Interface over the previous 24 hours of operation as well as over the current period. The past 24 hours are broken into 96 completed 15 minute intervals. The first row in this table (identified by acLogicalDs3IntervalNumber=1) represents the current interval statistics. The next 96 rows of this table (represented by acLogicalDs3IntervalNubmer=2..97) represents one of the past 15 minute intervals. The final row (identified by acLogicalDs3IntervalNumber=98) is the total of all the past intervals (2..97). This table is created automatically. This table is created automatically. SEQUENCE OF AcDs3IntervalEntry .1.3.6.1.4.1.2785.2.4.3.2 |
acLogicalDs3IntervalEntryAn entry in the Appian Logical DS3 Interval table. AcDs3IntervalEntry .1.3.6.1.4.1.2785.2.4.3.2.1 |
acLogicalDs3IntervalNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.4.3.2.1.1 |
acLogicalDs3IntervalIndexThe index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an acLogicalDs3Index object instance.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.2.1.2 |
acLogicalDs3IntervalNumberA number between 1 and 98, where 1 is the current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total of all the completed intervals (2..97).ro INTEGER .1.3.6.1.4.1.2785.2.4.3.2.1.3 |
acLogicalDs3IntervalValidStatsThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.3.2.1.4 |
acLogicalDs3IntervalResetStatsThis variable allows the data from the current interval (acLogicalDs3IntervalIndex=1) to be reset. The acLogicalDs3IntervalValidStats will be set to False after the reset for the current interval. This field has no effect on acLogicalDs3IntervalIndex=2..98. This field will always show a value of False when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.3.2.1.5 |
acLogicalDs3IntervalPESsThe counter associated with the number of P-bit Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.2.1.6 |
acLogicalDs3IntervalPSESsThe counter associated with the number of P-bit Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.2.1.7 |
acLogicalDs3IntervalSEFSsThe counter associated with the number of Severely Errored Framing Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.2.1.8 |
acLogicalDs3IntervalUASsThe counter associated with the number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.2.1.9 |
acLogicalDs3IntervalLCVsThe counter associated with the number of Line Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.2.1.10 |
acLogicalDs3IntervalPCVsThe counter associated with the number of P-bit Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.2.1.11 |
acLogicalDs3IntervalLESsThe number of Line Errored Seconds (BPVs or illegal zero sequences).ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.2.1.12 |
acLogicalDs3IntervalCCVsThe number of C-bit Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.2.1.13 |
acLogicalDs3IntervalCESsThe number of C-bit Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.2.1.14 |
acLogicalDs3IntervalCSESsThe number of C-bit Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.2.1.15 |
acLogicalDs3DayTableThe Appian Logical DS3 Day Table contains various statistics collected by the DS3 Interface over the previous 30 days of operation as well as over the current day period. The first row in this table (identified by acLogicalDs3DayNumber=1) represents the current day statistics. The next 30 rows of this table (represented by acLogicalDs3DayNubmer=2..31) represents one of the 24 hour day intervals. This table is created automatically. SEQUENCE OF AcDs3DayEntry .1.3.6.1.4.1.2785.2.4.3.3 |
acLogicalDs3DayEntryAn entry in the Appian Logical DS3 Day table. AcDs3DayEntry .1.3.6.1.4.1.2785.2.4.3.3.1 |
acLogicalDs3DayNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.4.3.3.1.1 |
acLogicalDs3DayIndexThe index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an acLogicalDs3Index object instance.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.3.1.2 |
acLogicalDs3DayNumberA number between 1 and 31, where 1 is the current 24 hour day interval in progress, 2 is the most recently completed 24 hour day interval and 31 is the 24 hour day interval completed 29 days prior to interval 2.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.3.1.3 |
acLogicalDs3DayValidStatsThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.3.3.1.4 |
acLogicalDs3DayResetStatsThis variable allows the data from the day (acLogicalDs3DayIndex=1) to be reset. The acLogicalDs3DayValidStats will be set to False after the reset for the current day. This field has no effect on acLogicalDs3DayIndex=2..31. This field will always show a value of False when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.3.3.1.5 |
acLogicalDs3DayPESsThe counter associated with the number of P-bit Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.3.1.6 |
acLogicalDs3DayPSESsThe counter associated with the number of P-bit Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.3.1.7 |
acLogicalDs3DaySEFSsThe counter associated with the number of Severely Errored Framing Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.3.1.8 |
acLogicalDs3DayUASsThe counter associated with the number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.3.1.9 |
acLogicalDs3DayLCVsThe counter associated with the number of Line Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.3.1.10 |
acLogicalDs3DayPCVsThe counter associated with the number of P-bit Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.3.1.11 |
acLogicalDs3DayLESsThe number of Line Errored Seconds (BPVs or illegal zero sequences).ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.3.1.12 |
acLogicalDs3DayCCVsThe number of C-bit Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.3.1.13 |
acLogicalDs3DayCESsThe number of C-bit Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.3.1.14 |
acLogicalDs3DayCSESsThe number of C-bit Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.3.1.15 |
acLogicalDs3FarEndIntervalTableThe Appian Logical DS3 Far End Interval Table contains various statistics collected by each DS3 Interface over the previous 24 hours of operation as well as over the current period. The past 24 hours are broken into 96 completed 15 minute intervals. The first row in this table (identified by acLogicalDs3FarEndIntervalNumber=1) represents the current interval statistics. The next 96 rows in this table (represented by acLogicalDs3FarEndIntervalNumber=2..97) represents one of the past 15 minute intervals. The final row (identified by acLogicalDs3FarEndIntervalNumber=98) is the total of all the past intervals (2..97). This table is created automatically. SEQUENCE OF AcDs3FarEndIntervalEntry .1.3.6.1.4.1.2785.2.4.3.5 |
acLogicalDs3FarEndIntervalEntryAn entry in the DS3 Far End Interval table. AcDs3FarEndIntervalEntry .1.3.6.1.4.1.2785.2.4.3.5.1 |
acLogicalDs3FarEndIntervalNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.4.3.5.1.1 |
acLogicalDs3FarEndIntervalIndexThe index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of acLogicalDs3Index.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.5.1.2 |
acLogicalDs3FarEndIntervalNumberA number between 1 and 96, where 1 is the current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total of all completed intervals (2..97).ro INTEGER .1.3.6.1.4.1.2785.2.4.3.5.1.3 |
acLogicalDs3FarEndIntervalValidStatsThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.3.5.1.4 |
acLogicalDs3FarEndIntervalResetStatsThis variable allows the data for the current interval (acLogicalDs3FarEndIntervalIndex=1) to be reset. The acSdx3FarEndIntervalValidStats will be set to False after the reset for the current interval. This field has no effect on acLogicalDs3FarEndIntervalIndex 2..98. This field will always show a value of false when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.3.5.1.5 |
acLogicalDs3FarEndIntervalCESsThe counter associated with the number of Far End C-bit Errored Seconds encountered by a DS3 interface. In the case where the agent is a proxy and data is not available, return noSuchInstance.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.5.1.6 |
acLogicalDs3FarEndIntervalCSESsThe counter associated with the number of Far End C-bit Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.5.1.7 |
acLogicalDs3FarEndIntervalCCVsThe counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.5.1.8 |
acLogicalDs3FarEndIntervalUASsThe counter associated with the number of Far End unavailable seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.5.1.9 |
acLogicalDs3FarEndDayTableThe Appian Logical DS3 Far End Day Table contains various statistics collected by each DS3 Interface over the previous 30 days of operation as well as over the current period. The first row in this table (identified by acLogicalDs3FarEndDayNumber=1) represents the current day statistics. The next 30 rows in this table (represented by acLogicalDs3FarEndDayNumber=2..31) represents one of the past 24 hour days. This table is created automatically. SEQUENCE OF AcDs3FarEndDayEntry .1.3.6.1.4.1.2785.2.4.3.6 |
acLogicalDs3FarEndDayEntryAn entry in the DS3 Far End Day table. AcDs3FarEndDayEntry .1.3.6.1.4.1.2785.2.4.3.6.1 |
acLogicalDs3FarEndDayNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.4.3.6.1.1 |
acLogicalDs3FarEndDayIndexThe index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of acLogicalDs3Index.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.6.1.2 |
acLogicalDs3FarEndDayNumberA number between 1 and 31, where 1 is the current 24 hour day interval in progress, 2 is the most recently completed 24 hour day and 31 is the 24 hour day 29 days prior to interval 2.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.6.1.3 |
acLogicalDs3FarEndDayValidStatsThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.3.6.1.4 |
acLogicalDs3FarEndDayResetStatsThis variable allows the data for the current interval (acLogicalDs3FarEndDayIndex=1) to be reset. The acLogicalDs3FarEndDayValidStats will be set to False after the reset for the current day. This field has no effect on acLogicalDs3FarEndDayIndex 2..31. This field will always show a vluae of false when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.3.6.1.5 |
acLogicalDs3FarEndDayCESsThe counter associated with the number of Far End C-bit Errored Seconds encountered by a DS3 interface. In the case where the agent is a proxy and data is not available, return noSuchInstance.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.6.1.6 |
acLogicalDs3FarEndDayCSESsThe counter associated with the number of Far End C-bit Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.6.1.7 |
acLogicalDs3FarEndDayCCVsThe counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.6.1.8 |
acLogicalDs3FarEndDayUASsThe counter associated with the number of Far End unavailable seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.3.6.1.9 |
acLogicalDs3ThresholdTableThe Appian Logical DS3 Threshold Table allows the user to configure the threshold values for each of the statistics found in the interval table base on the 15 minute interval on the day. This table is created automatically. SEQUENCE OF AcDs3ThresholdEntry .1.3.6.1.4.1.2785.2.4.3.7 |
acLogicalDs3ThresholdEntryAn entry in the Appian DS1 Threshold table. AcDs3ThresholdEntry .1.3.6.1.4.1.2785.2.4.3.7.1 |
acLogicalDs3ThresholdNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.4.3.7.1.1 |
acLogicalDs3ThresholdIndexThe index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a acLogicalDs3Index object instance.ro INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.2 |
acLogicalDs3ThresholdNEIntervalPESsThe threshold value for near end interval number of P-bit Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.3 |
acLogicalDs3ThresholdNEIntervalPSESsThe threshold value for the near end interval number of P-Bit Severely Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.4 |
acLogicalDs3ThresholdNEIntervalSEFSsThe threshold for the near end interval number of Severely Errored Framing Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.5 |
acLogicalDs3ThresholdNEIntervalUASsThe threshold for the near end interval number of Unavailable Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.6 |
acLogicalDs3ThresholdNEIntervalLCVsThe threshold for the near end interval number of Controlled Slip Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.7 |
acLogicalDs3ThresholdNEIntervalPCVsThe threshold for the near end interval number of Path Coding Violations. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.8 |
acLogicalDs3ThresholdNEIntervalLESsThe threshold value for the near end interval number of Line Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.9 |
acLogicalDs3ThresholdNEIntervalCCVsThe threshold for the near end interval number of C-Bit Coding Violations. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.10 |
acLogicalDs3ThresholdNEIntervalCESsThe threshold for the near end interval number of C-Bit Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.11 |
acLogicalDs3ThresholdNEIntervalCSESsThe threshold for the near end interval number of C-Bit Severely Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.12 |
acLogicalDs3ThresholdNEDayPESsThe threshold value for near end day number of P-Bit Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.13 |
acLogicalDs3ThresholdNEDayPSESsThe threshold for the near end day number of P-Bit Severely Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.14 |
acLogicalDs3ThresholdNEDaySEFSsThe threshold value for the near end day number of Severely Errored Framing Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.15 |
acLogicalDs3ThresholdNEDayUASsThe threshold value for the near end day number of Unavailable Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.16 |
acLogicalDs3ThresholdNEDayLCVsThe threshold for the near end day number of Line Coding Violations. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.17 |
acLogicalDs3ThresholdNEDayPCVsThe threshold value for the near end day number of Path Coding Violations. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.18 |
acLogicalDs3ThresholdNEDayLESsThe threshold for the near end day number of Line Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.19 |
acLogicalDs3ThresholdNEDayCCVsThe threshold for the near end day number of C-Bit Coding Violations. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.20 |
acLogicalDs3ThresholdNEDayCESsThe threshold for the near end day number of C-Bit Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.21 |
acLogicalDs3ThresholdNEDayCSESsThe threshold for the near end day number of C-Bit Severely Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.22 |
acLogicalDs3ThresholdFEIntervalCESsThe threshold for the far end interval counter associated with the number of Far End C-bit Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.23 |
acLogicalDs3ThresholdFEIntervalCSESsThe threshold for the far end interval counter associated with the number of Far End C-bit Severely Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.24 |
acLogicalDs3ThresholdFEIntervalCCVsThe threshold for the far end interval counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.25 |
acLogicalDs3ThresholdFEIntervalUASsThe threshold for the far end interval counter associated with the number of Far End unavailable seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.26 |
acLogicalDs3ThresholdFEDayCESsThe threshold for the far end day counter associated with the number of Far End C-bit Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.27 |
acLogicalDs3ThresholdFEDayCSESsThe threshold for the far end day counter associated with the number of Far End C-bit Severely Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.28 |
acLogicalDs3ThresholdFEDayCCVsThe threshold for the far end day counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.29 |
acLogicalDs3ThresholdFEDayUASsThe threshold for the far end day counter associated with the number of Far End unavailable seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.3.7.1.30 |