APPIAN-LPORT-DS1-MIB
AI MIB Summary
The APPIAN-LPORT-DS1-MIB module enables monitoring and management of Appian logical DS1 interface states, traffic counters, and error statistics for T1 digital signal level 1 circuits. It provides specific OID access to interface status, packet throughput, and fault conditions for Appian network devices supporting DS1 aggregation.
The MIB module to describe the Appian Logical DS1 interfaces objects.
Main OID:
acLogicalDs1.1.3.6.1.4.1.2785.2.4.2
179
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
179 total| Object Name |
|---|
acLogicalDs1The MIB module to describe the Appian Logical DS1 interfaces objects. MODULE-IDENTITY .1.3.6.1.4.1.2785.2.4.2 |
acLogicalDs1Traps OBJECT IDENTIFIER .1.3.6.1.4.1.2785.2.4.2.0 |
acLogicalDs1LineStatusChangeTrapAn acLogcialDs1LineStatusChange trap is sent when the value of an instance acLogicalDs1ConfigLineStatus changes. It can be utilized by an NMS to trigger polls. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.1 |
acLogicalDs1StatsResetTrapThe Logical Ds1 statistics for this interface have been reset to zero (0) which may effect long term trending functions monitoring this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.2 |
acLogicalDs1CfgErrorTrapA configuration request to the Logical Ds1 configuration table for an interface has been detected as invalid or corrupt. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.3 |
acLogicalDs1LinkDownTrapThe link for this ds1 interface has obtained sync. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.4 |
acLogicalDs1LinkUpTrapThe link for this ds1 interface has lost sync. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.5 |
acLogicalDs1ExceededThresholdNEIntervalESsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.7 |
acLogicalDs1ExceededThresholdNEIntervalSESsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.8 |
acLogicalDs1ExceededThresholdNEIntervalSEFSsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.9 |
acLogicalDs1ExceededThresholdNEIntervalUASsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.10 |
acLogicalDs1ExceededThresholdNEIntervalCSSsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.11 |
acLogicalDs1ExceededThresholdNEIntervalPCVsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.12 |
acLogicalDs1ExceededThresholdNEIntervalLESsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.13 |
acLogicalDs1ExceededThresholdNEIntervalBESsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.14 |
acLogicalDs1ExceededThresholdNEIntervalDMsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.15 |
acLogicalDs1ExceededThresholdNEIntervalLCVsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.16 |
acLogicalDs1ExceededThresholdNEDayESsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.17 |
acLogicalDs1ExceededThresholdNEDaySESsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.18 |
acLogicalDs1ExceededThresholdNEDaySEFSsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.19 |
acLogicalDs1ExceededThresholdNEDayUASsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.20 |
acLogicalDs1ExceededThresholdNEDayCSSsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.21 |
acLogicalDs1ExceededThresholdNEDayPCVsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.22 |
acLogicalDs1ExceededThresholdNEDayLESsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.23 |
acLogicalDs1ExceededThresholdNEDayBESsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.24 |
acLogicalDs1ExceededThresholdNEDayDMsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.25 |
acLogicalDs1ExceededThresholdNEDayLCVsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.26 |
acLogicalDs1ExceededThresholdFEIntervalESsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.27 |
acLogicalDs1ExceededThresholdFEIntervalSESsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.28 |
acLogicalDs1ExceededThresholdFEIntervalSEFSsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.29 |
acLogicalDs1ExceededThresholdFEIntervalUASsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.30 |
acLogicalDs1ExceededThresholdFEIntervalCSSsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.31 |
acLogicalDs1ExceededThresholdFEIntervalLESsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.32 |
acLogicalDs1ExceededThresholdFEIntervalPCVsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.33 |
acLogicalDs1ExceededThresholdFEIntervalBESsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.34 |
acLogicalDs1ExceededThresholdFEIntervalDMsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.35 |
acLogicalDs1ExceededThresholdFEDayESsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.36 |
acLogicalDs1ExceededThresholdFEDaySESsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.37 |
acLogicalDs1ExceededThresholdFEDaySEFSsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.38 |
acLogicalDs1ExceededThresholdFEDayUASsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.39 |
acLogicalDs1ExceededThresholdFEDayCSSsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.40 |
acLogicalDs1ExceededThresholdFEDayLESsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.41 |
acLogicalDs1ExceededThresholdFEDayPCVsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.42 |
acLogicalDs1ExceededThresholdFEDayBESsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.43 |
acLogicalDs1ExceededThresholdFEDayDMsTrapThe specified threshold for this interface has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.4.2.0.44 |
acLogicalDs1ConfigTableThe Appian Logical DS1 Configuration table. This table is created by the EMS/CLI. SEQUENCE OF AcLogicalDs1ConfigEntry .1.3.6.1.4.1.2785.2.4.2.1 |
acLogicalDs1ConfigEntryAn entry in the Appian Logical DS1 Configuration table. AcLogicalDs1ConfigEntry .1.3.6.1.4.1.2785.2.4.2.1.1 |
acLogicalDs1ConfigNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.4.2.1.1.1 |
acLogicalDs1ConfigIndexThis value for this object is equal to the value of index from the Time Slot Table that this DS1 corresponds. The value can be a number between 1 and 65535 (64k - 1).ro INTEGER .1.3.6.1.4.1.2785.2.4.2.1.1.2 |
acLogicalDs1ConfigAdminStatusAppian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Refer to the Appian-SMI.mib file for additional information.rw AcAdminStatus (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.4.2.1.1.3 |
acLogicalDs1ConfigTimeElapsedIntervalThe number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.2785.2.4.2.1.1.4 |
acLogicalDs1ConfigValidIntervalsThe number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.ro INTEGER .1.3.6.1.4.1.2785.2.4.2.1.1.5 |
acLogicalDs1ConfigTimeElapsedDayThe number of seconds that have elapsed since the beginning of the near end current day error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current day interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.2785.2.4.2.1.1.6 |
acLogicalDs1ConfigValidDaysThe number of previous near end days for which data was collected. The value will be 30 unless the interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hr near end days since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.ro INTEGER .1.3.6.1.4.1.2785.2.4.2.1.1.7 |
acLogicalDs1ConfigTimeElapsedFarEndIntervalThe number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.2785.2.4.2.1.1.8 |
acLogicalDs1ConfigValidFarEndIntervalsThe number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.ro INTEGER .1.3.6.1.4.1.2785.2.4.2.1.1.9 |
acLogicalDs1ConfigTimeElapsedFarEndDayThe number of seconds that have elapsed since the beginning of the far end current day error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current day interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.2785.2.4.2.1.1.10 |
acLogicalDs1ConfigValidFarEndDaysThe number of previous near end days for which data was collected. The value will be 30 unless the far/near end interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hr far end days since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.ro INTEGER .1.3.6.1.4.1.2785.2.4.2.1.1.11 |
acLogicalDs1ConfigSendCodeThis variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the interface to send the code requested. The values mean: ds1SendNoCode sending looped or normal data ds1SendLineCode sending a request for a line loopback ds1SendPayloadCode sending a request for a payload loopback ds1SendResetCode sending a loopback termination request ds1SendQRS sending a Quasi-Random Signal (QRS) test pattern ds1Send511Pattern sending a 511 bit fixed test pattern ds1Send3in24Pattern sending a fixed test pattern of 3 bits set in 24 ds1SendOtherTestPattern sending a test pattern other than those described by this objectrw Enumeration .1.3.6.1.4.1.2785.2.4.2.1.1.12 |
acLogicalDs1ConfigCircuitIdentifierThis variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.rw DisplayString .1.3.6.1.4.1.2785.2.4.2.1.1.13 |
acLogicalDs1ConfigLoopbackConfigThis variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in response to a requested loopback state that the interface does not support. The values mean: ds1NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. ds1PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. ds1LineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. ds1OtherLoop Loopbacks that are not defined here. ds1InwardLoop The transmitted signal at this interface is looped back and received by the same interface. What is transmitted onto the line is product dependent. ds1DualLoop Both ds1LineLoop and ds1InwardLoop will be active simultaneously.rw Enumeration .1.3.6.1.4.1.2785.2.4.2.1.1.14 |
acLogicalDs1ConfigLineStatusThis variable indicates the Line Status of the interface. It contains loopback, failure, received 'alarm' and transmitted 'alarms information. The ds1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. ds1NoAlarm must be set if and only if no other flag is set. If the ds1loopbackState bit is set, the loopback in effect can be determined from the ds1loopbackConfig object. The various bit positions are: 1 ds1NoAlarm No alarm present 2 ds1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm) 4 ds1XmtFarEndLOF Near end sending LOF Indication 8 ds1RcvAIS Far end sending AIS 16 ds1XmtAIS Near end sending AIS 32 ds1LossOfFrame Near end LOF (a.k.a., Red Alarm) 64 dsLossOfSignal Near end Loss Of Signal 128 ds1LoopbackState Near end is looped 256 ds1RcvFarEndLOMF Far End Sending TS16 LOMF 512 ds1XmtFarEndLOMF Near End Sending TS16 LOMF 1024 ds1RcvTestCode Near End detects a test code 2048 ds1OtherFailure any line status not defined here 4096 ds1UnavailSigState Near End in Unavailable Signal State 16384 ds1NetEquipOOS Carrier Equipment Out of Servicero INTEGER .1.3.6.1.4.1.2785.2.4.2.1.1.15 |
acLogicalDs1ConfigTransmitClockSourceThe source of Transmit Clock. For the logicalDs1, the timing will be throughTiming. This is not currently a configurable parameter. The options are: 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used or when an external clock is attached to the box containing the interface. 'throughTiming' indicates that recovered receive clock from another interface is used as the transmit clock.ro Enumeration .1.3.6.1.4.1.2785.2.4.2.1.1.16 |
acLogicalDs1ConfigInvalidIntervalsThe number of intervals in the range from 0 to ds1ValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.2785.2.4.2.1.1.17 |
acLogicalDs1ConfigInvalidDaysThe number of days in the range from 0 to ds1ValidDays for which no data is available. This object will typically be zero except in cases where the data for some days are not available (e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.2785.2.4.2.1.1.18 |
acLogicalDs1ConfigInvalidFarEndIntervalsThe number of intervals in the range from 0 to acLogicalDs1ConfigValidFarEndIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.2785.2.4.2.1.1.19 |
acLogicalDs1ConfigInvalidFarEndDaysThe number of days in the range from 0 to acLogicalDs1ConfigValidFarEndDays for which no data is available. This object will typically be zero except in cases where the data for some days are not available (e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.2785.2.4.2.1.1.20 |
acLogicalDs1ConfigLineStatusLastChangeThe value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.2.1.1.21 |
acLogicalDs1ConfigLineStatusChangeTrapEnableIndicates whether acLogicalDs1ConfigLineStatusChange traps should be generated for this interface.rw Enumeration .1.3.6.1.4.1.2785.2.4.2.1.1.22 |
acLogicalDs1ConfigLoopbackStatusThis variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end. The ds1LoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 ds1NoLoopback 2 ds1NearEndPayloadLoopback 4 ds1NearEndLineLoopback 8 ds1NearEndOtherLoopback 16 ds1NearEndInwardLoopback 32 ds1FarEndPayloadLoopback 64 ds1FarEndLineLoopbackro INTEGER .1.3.6.1.4.1.2785.2.4.2.1.1.23 |
acLogicalDs1ConfigVTNumberThis variable represents the virtual tributary number in the STS-1 frame that this DS1 corresponds to.ro INTEGER .1.3.6.1.4.1.2785.2.4.2.1.1.24 |
acLogicalDs1IntervalTableThe Appian DS1 Interval Table contains various statistics collected by each DS1 Interface over the previous 24 hours of operation as well as over the current period. The past 24 hours are broken into 96 completed 15 minute intervals. The first row in this table (identified by acLogicalDs1IntervalNumber=1) represents the current interval statistics. The next 96 rows in this table (represented by acLogicalDs1IntervalNumber=2..97) represents one of the past 15 minute intervals. The final row (identified by acLogicalDs1IntervalNumber=98) is the total of all the past intervals (2..97). This table is created automatically. SEQUENCE OF AcLogicalDs1IntervalEntry .1.3.6.1.4.1.2785.2.4.2.2 |
acLogicalDs1IntervalEntryAn entry in the Appian DS1 Interval table. AcLogicalDs1IntervalEntry .1.3.6.1.4.1.2785.2.4.2.2.1 |
acLogicalDs1IntervalNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.4.2.2.1.1 |
acLogicalDs1IntervalIndexThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a acLogicalDs1Index object instance.ro INTEGER .1.3.6.1.4.1.2785.2.4.2.2.1.2 |
acLogicalDs1IntervalNumberA number between 1 and 98, where 1 is the current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total (sum) of all of the previous completed intervals (2..97).ro INTEGER .1.3.6.1.4.1.2785.2.4.2.2.1.3 |
acLogicalDs1IntervalValidStatsThis variable indicates if the data for this interval is valid. For acLogicalDs1IntervalNumber=98, this value will only be true if all data is valid for intervals 2..97.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.2.2.1.4 |
acLogicalDs1IntervalResetStatsThis variable allows the data for the current interval (acLogicalDs1IntervalNumber = 1) to be reset. The acLogicalDs1IntervalValidStats will be set to False after the reset for the current interval. This field has no effect on acLogicalDs1IntervalNumber 2..98. This field will always show a value of False when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.2.2.1.5 |
acLogicalDs1IntervalESsThe number of Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.2.1.6 |
acLogicalDs1IntervalSESsThe number of Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.2.1.7 |
acLogicalDs1IntervalSEFSsThe number of Severely Errored Framing Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.2.1.8 |
acLogicalDs1IntervalUASsThe number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.2.1.9 |
acLogicalDs1IntervalCSSsThe number of Controlled Slip Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.2.1.10 |
acLogicalDs1IntervalPCVsThe number of Path Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.2.1.11 |
acLogicalDs1IntervalLESsThe number of Line Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.2.1.12 |
acLogicalDs1IntervalBESsThe number of Bursty Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.2.1.13 |
acLogicalDs1IntervalDMsThe number of Degraded Minutes.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.2.1.14 |
acLogicalDs1IntervalLCVsThe number of Line Code Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.2.1.15 |
acLogicalDs1DayTableThe Appian Logical DS1 Day Table contains various statistics collected by each DS1 Interface over the previous 30 days of operation as well as over the current day period. The first row in this table (identified by acLogicalDs1DayNumber=1) represents the current day statistics. The next 30 rows in this table (represented by acLogicalDs1DayNumber=2..31) represents one of the past 24 hr periods (day). This table is created automatically. SEQUENCE OF AcLogicalDs1DayEntry .1.3.6.1.4.1.2785.2.4.2.3 |
acLogicalDs1DayEntryAn entry in the Appian DS1 Day table. AcLogicalDs1DayEntry .1.3.6.1.4.1.2785.2.4.2.3.1 |
acLogicalDs1DayNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.4.2.3.1.1 |
acLogicalDs1DayIndexThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a acLogicalDs1Index object instance.ro INTEGER .1.3.6.1.4.1.2785.2.4.2.3.1.2 |
acLogicalDs1DayNumberA number between 1 and 31, where 1 is the current 24 hour interval in progress (day), 2 is the most recently completed 24 hour interval and 31 is the 24 hour interval completed 29 days prior to interval 1.ro INTEGER .1.3.6.1.4.1.2785.2.4.2.3.1.3 |
acLogicalDs1DayValidStatsThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.2.3.1.4 |
acLogicalDs1DayResetStatsThis variable allows the data for the current day (acLogicalDs1DayIndex = 1) to be reset. The acLogicalDs1DayValidStats will be set to False after the reset for the current day. This field has no effect on acLogicalDs1DayIndex 2..31. This field will always show a value of False when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.2.3.1.5 |
acLogicalDs1DayESsThe number of Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.3.1.6 |
acLogicalDs1DaySESsThe number of Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.3.1.7 |
acLogicalDs1DaySEFSsThe number of Severely Errored Framing Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.3.1.8 |
acLogicalDs1DayUASsThe number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.3.1.9 |
acLogicalDs1DayCSSsThe number of Controlled Slip Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.3.1.10 |
acLogicalDs1DayPCVsThe number of Path Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.3.1.11 |
acLogicalDs1DayLESsThe number of Line Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.3.1.12 |
acLogicalDs1DayBESsThe number of Bursty Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.3.1.13 |
acLogicalDs1DayDMsThe number of Degraded Minutes.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.3.1.14 |
acLogicalDs1DayLCVsThe number of Line Code Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.3.1.15 |
acLogicalDs1FarEndIntervalTableThe DS1 Logical Far End Interval Table contains various statistics collected by each DS1 interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by acLogicalDs1FarEndIntervalNumber) for one specific instance (identified by acLogicalDs1FarEndIntervalIndex). This table is created automatically. SEQUENCE OF AcLogicalDs1FarEndIntervalEntry .1.3.6.1.4.1.2785.2.4.2.4 |
acLogicalDs1FarEndIntervalEntryAn entry in the DS1 Far End Interval table. AcLogicalDs1FarEndIntervalEntry .1.3.6.1.4.1.2785.2.4.2.4.1 |
acLogicalDs1FarEndIntervalNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.4.2.4.1.1 |
acLogicalDs1FarEndIntervalIndexThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of acLogicalDs1Index.ro INTEGER .1.3.6.1.4.1.2785.2.4.2.4.1.2 |
acLogicalDs1FarEndIntervalNumberA number between 1 and 98, where 1 is current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total of intervals 2..97 (sum).ro INTEGER .1.3.6.1.4.1.2785.2.4.2.4.1.3 |
acLogicalDs1FarEndIntervalValidStatsThis variable indicates if the data for this interval is valid. For acLogicalDs1FarEndIntervalNumber=98, this value will only be true if all data is valid for intervals 2..97.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.2.4.1.4 |
acLogicalDs1FarEndIntervalResetStatsThis variable allows the data for the current interval (acLogicalDs1FarEndIntervalNumber = 1) to be reset. The acLogicalDs1FarEndIntervalValidStats will be set to False after the reset for the current interval. This field has no effect on acLogicalDs1FarEndIntervalNumber 2..98. This field will always show a value of false when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.2.4.1.5 |
acLogicalDs1FarEndIntervalESsThe number of Far End Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.4.1.6 |
acLogicalDs1FarEndIntervalSESsThe number of Far End Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.4.1.7 |
acLogicalDs1FarEndIntervalSEFSsThe number of Far End Severely Errored Framing Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.4.1.8 |
acLogicalDs1FarEndIntervalUASsThe number of Unavailable Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.4.1.9 |
acLogicalDs1FarEndIntervalCSSsThe number of Far End Controlled Slip Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.4.1.10 |
acLogicalDs1FarEndIntervalLESsThe number of Far End Line Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.4.1.11 |
acLogicalDs1FarEndIntervalPCVsThe number of Far End Path Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.4.1.12 |
acLogicalDs1FarEndIntervalBESsThe number of Far End Bursty Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.4.1.13 |
acLogicalDs1FarEndIntervalDMsThe number of Far End Degraded Minutes.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.4.1.14 |
acLogicalDs1FarEndDayTableThe DS1 Logical Far End Day Table contains various statistics collected by each DS1 interface over the previous 30 days of operation. Each row in this table represents a one day interval (identified by acLogicalDs1FarEndDayNumber). This table is created automatically. SEQUENCE OF AcLogicalDs1FarEndDayEntry .1.3.6.1.4.1.2785.2.4.2.5 |
acLogicalDs1FarEndDayEntryAn entry in the DS1 Far End Day table. AcLogicalDs1FarEndDayEntry .1.3.6.1.4.1.2785.2.4.2.5.1 |
acLogicalDs1FarEndDayNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.4.2.5.1.1 |
acLogicalDs1FarEndDayIndexThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of acLogicalDs1Index.ro INTEGER .1.3.6.1.4.1.2785.2.4.2.5.1.2 |
acLogicalDs1FarEndDayNumberA number between 1 and 31, where 1 is current 24 hour day interval in progress, 2 is the most recently completed 24 hour day interval and 31 is the 24 hour day interval completed 29 days prior to interval 2.ro INTEGER .1.3.6.1.4.1.2785.2.4.2.5.1.3 |
acLogicalDs1FarEndDayValidStatsThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.2.5.1.4 |
acLogicalDs1FarEndDayResetStatsThis variable allows the data for the current day (acLogicalDs1FarEndDayIndex = 1) to be reset. The acLogicalDs1FarEndDayValidStats will be set to False after the reset for the current interval. This field has no effect on acLogicalDs1FarEndDayIndex 2..31. This field will always show a value of false when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.4.2.5.1.5 |
acLogicalDs1FarEndDayESsThe number of Far End Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.5.1.6 |
acLogicalDs1FarEndDaySESsThe number of Far End Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.5.1.7 |
acLogicalDs1FarEndDaySEFSsThe number of Far End Severely Errored Framing Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.5.1.8 |
acLogicalDs1FarEndDayUASsThe number of Unavailable Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.5.1.9 |
acLogicalDs1FarEndDayCSSsThe number of Far End Controlled Slip Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.5.1.10 |
acLogicalDs1FarEndDayLESsThe number of Far End Line Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.5.1.11 |
acLogicalDs1FarEndDayPCVsThe number of Far End Path Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.5.1.12 |
acLogicalDs1FarEndDayBESsThe number of Far End Bursty Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.5.1.13 |
acLogicalDs1FarEndDayDMsThe number of Far End Degraded Minutes.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.4.2.5.1.14 |
acLogicalDs1ThresholdTableThe Appian DS1 Logical Threshold Table allows the user to configure the threshold values for each of the statistics found in the interval table base on the 15 minute interval on the day. This table is created automatically. SEQUENCE OF AcLogicalDs1ThresholdEntry .1.3.6.1.4.1.2785.2.4.2.6 |
acLogicalDs1ThresholdEntryAn entry in the Appian DS1 Threshold table. AcLogicalDs1ThresholdEntry .1.3.6.1.4.1.2785.2.4.2.6.1 |
acLogicalDs1ThresholdNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.4.2.6.1.1 |
acLogicalDs1ThresholdIndexThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a acLogicalDs1Index object instance. This table is created automatically.ro INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.2 |
acLogicalDs1ThresholdNEIntervalESsThe threshold value for interval number of Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.3 |
acLogicalDs1ThresholdNEIntervalSESsThe threshold value for the interval number of Severely Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.4 |
acLogicalDs1ThresholdNEIntervalSEFSsThe threshold for the interval number of Severely Errored Framing Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.5 |
acLogicalDs1ThresholdNEIntervalUASsThe threshold for the interval number of Unavailable Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.6 |
acLogicalDs1ThresholdNEIntervalCSSsThe threshold for the interval number of Controlled Slip Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.7 |
acLogicalDs1ThresholdNEIntervalPCVsThe threshold for the interval number of Path Coding Violations. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.8 |
acLogicalDs1ThresholdNEIntervalLESsThe threshold value for the interval number of Line Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.9 |
acLogicalDs1ThresholdNEIntervalBESsThe threshold for the interval number of Bursty Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.10 |
acLogicalDs1ThresholdNEIntervalDMsThe threshold for the interval number of Degraded Minutes. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.11 |
acLogicalDs1ThresholdNEIntervalLCVsThe threshold for the interval number of Line Code Violations. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.12 |
acLogicalDs1ThresholdNEDayESsThe threshold value for day number of Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.13 |
acLogicalDs1ThresholdNEDaySESsThe threshold for the day number of Severely Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.14 |
acLogicalDs1ThresholdNEDaySEFSsThe threshold value for the day number of Severely Errored Framing Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.15 |
acLogicalDs1ThresholdNEDayUASsThe threshold value for the day number of Unavailable Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.16 |
acLogicalDs1ThresholdNEDayCSSsThe threshold for the day number of Controlled Slip Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.17 |
acLogicalDs1ThresholdNEDayPCVsThe threshold value for the day number of Path Coding Violations. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.18 |
acLogicalDs1ThresholdNEDayLESsThe threshold for the day number of Line Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.19 |
acLogicalDs1ThresholdNEDayBESsThe threshold for the day number of Bursty Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.20 |
acLogicalDs1ThresholdNEDayDMsThe threshold for the day number of Degraded Minutes. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.21 |
acLogicalDs1ThresholdNEDayLCVsThe threshold for the day number of Line Code Violations. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.22 |
acLogicalDs1ThresholdFEIntervalESsThe threshold for the far end interval number of Far End Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.23 |
acLogicalDs1ThresholdFEIntervalSESsThe threshold for the far end interval number of Far End Severely Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.24 |
acLogicalDs1ThresholdFEIntervalSEFSsThe threshold for the far end interval number of Far End Severely Errored Framing Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.25 |
acLogicalDs1ThresholdFEIntervalUASsThe threshold value for the far end interval number of Unavailable Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.26 |
acLogicalDs1ThresholdFEIntervalCSSsThe threshold value for the far end interval number of Far End Controlled Slip Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.27 |
acLogicalDs1ThresholdFEIntervalLESsThe threshold value for the far end interal number of Far End Line Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.28 |
acLogicalDs1ThresholdFEIntervalPCVsThe threshold for the far end internal number of Far End Path Coding Violations. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.29 |
acLogicalDs1ThresholdFEIntervalBESsThe threshold for the far end interval number of Far End Bursty Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.30 |
acLogicalDs1ThresholdFEIntervalDMsThe threshold for the far end interval number of Far End Degraded Minutes. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.31 |
acLogicalDs1ThresholdFEDayESsThe threshold for the far end day number of Far End Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.32 |
acLogicalDs1ThresholdFEDaySESsThe threshold for the far end day number of Far End Severely Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.33 |
acLogicalDs1ThresholdFEDaySEFSsThe threshold for the far end day number of Far End Severely Errored Framing Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.34 |
acLogicalDs1ThresholdFEDayUASsThe threshold value for the far end day number of Unavailable Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.35 |
acLogicalDs1ThresholdFEDayCSSsThe threshold value for the far end day number of Far End Controlled Slip Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.36 |
acLogicalDs1ThresholdFEDayLESsThe threshold value for the far end interal number of Far End Line Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.37 |
acLogicalDs1ThresholdFEDayPCVsThe threshold for the far end internal number of Far End Path Coding Violations. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.38 |
acLogicalDs1ThresholdFEDayBESsThe threshold for the far end day number of Far End Bursty Errored Seconds. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.39 |
acLogicalDs1ThresholdFEDayDMsThe threshold for the far end day number of Far End Degraded Minutes. A value of 0 disables the threshold for this error.rw INTEGER .1.3.6.1.4.1.2785.2.4.2.6.1.40 |