APPIAN-PPORT-DS1-MIB
AI MIB Summary
The APPIAN-PPORT-DS1-MIB module provides granular monitoring and management of Appian DS1 interface parameters, specifically tracking physical layer statistics and interface states for T1 circuits. This module enforces strict isolation by maintaining separate management tables for each OSAP, ensuring that DS1 interface data is not shared across different operational contexts.
The MIB module to describe the Appian DS1 interfaces objects. The tables for this DS1 are NOT SHARED between OSAPs.
Main OID:
acDs1.1.3.6.1.4.1.2785.2.3.4
190
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
190 total| Object Name |
|---|
acDs1The MIB module to describe the Appian DS1 interfaces objects. The tables for this DS1 are NOT SHARED between OSAPs. MODULE-IDENTITY .1.3.6.1.4.1.2785.2.3.4 |
acDs1Traps OBJECT IDENTIFIER .1.3.6.1.4.1.2785.2.3.4.0 |
acDs1LineStatusChangeTrapAn acLogcialDs1LineStatusChange trap is sent when the value of an instance acDs1ConfigLineStatus changes. It can be utilized by an NMS to trigger polls. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.1 |
acDs1StatsResetTrapThe Ds1 statistics for this interface have been reset to zero (0) which may effect long term trending functions monitoring this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.2 |
acDs1CfgErrorTrapA configuration request to the Ds1 configuration table for an interface has been detected as invalid or corrupt. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.3 |
acDs1LinkDownTrapThe link for this physical ds1 interface has obtained sync. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.4 |
acDs1LinkUpTrapThe link for this physical ds1 interface has been lost. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.5 |
acDs1ExceededThresholdNEIntervalESsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.7 |
acDs1ExceededThresholdNEIntervalSESsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.8 |
acDs1ExceededThresholdNEIntervalSEFSsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.9 |
acDs1ExceededThresholdNEIntervalUASsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.10 |
acDs1ExceededThresholdNEIntervalCSSsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.11 |
acDs1ExceededThresholdNEIntervalPCVsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.12 |
acDs1ExceededThresholdNEIntervalLESsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.13 |
acDs1ExceededThresholdNEIntervalBESsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.14 |
acDs1ExceededThresholdNEIntervalDMsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.15 |
acDs1ExceededThresholdNEIntervalLCVsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.16 |
acDs1ExceededThresholdNEDayESsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.17 |
acDs1ExceededThresholdNEDaySESsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.18 |
acDs1ExceededThresholdNEDaySEFSTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.19 |
acDs1ExceededThresholdNEDayUASsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.20 |
acDs1ExceededThresholdNEDayCSSsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.21 |
acDs1ExceededThresholdNEDayPCVsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.22 |
acDs1ExceededThresholdNEDayLESsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.23 |
acDs1ExceededThresholdNEDayBESsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.24 |
acDs1ExceededThresholdNEDayDMsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.25 |
acDs1ExceededThresholdNEDayLCVsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.26 |
acDs1ExceededThresholdFEIntervalESsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.27 |
acDs1ExceededThresholdFEIntervalSESsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.28 |
acDs1ExceededThresholdFEIntervalSEFSsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.29 |
acDs1ExceededThresholdFEIntervalUASsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.30 |
acDs1ExceededThresholdFEIntervalCSSsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.31 |
acDs1ExceededThresholdFEIntervalLESsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.32 |
acDs1ExceededThresholdFEIntervalPCVsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.33 |
acDs1ExceededThresholdFEIntervalBESsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.34 |
acDs1ExceededThresholdFEIntervalDMsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.35 |
acDs1ExceededThresholdFEDayESsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.36 |
acDs1ExceededThresholdFEDaySESsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.37 |
acDs1ExceededThresholdFEDaySEFSsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.38 |
acDs1ExceededThresholdFEDayUASsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.39 |
acDs1ExceededThresholdFEDayCSSsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.40 |
acDs1ExceededThresholdFEDayLESsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.41 |
acDs1ExceededThresholdFEDayPCVsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.42 |
acDs1ExceededThresholdFEDayBESsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.43 |
acDs1ExceededThresholdFEDayDMsTrapThe threshold value speficed has been exceeded for this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2785.2.3.4.0.44 |
acDs1ConfigTableThe DS1 Configuration table. This table is created by the EMS/CLI. SEQUENCE OF AcDs1ConfigEntry .1.3.6.1.4.1.2785.2.3.4.1 |
acDs1ConfigEntryAn entry in the DS1 Configuration table. AcDs1ConfigEntry .1.3.6.1.4.1.2785.2.3.4.1.1 |
acDs1ConfigNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.1.1.1 |
acDs1ConfigSlotThe physical slot number of the port.ro AcSlotNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.1.1.2 |
acDs1ConfigPortThe physical port number of the portro AcPortNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.1.1.3 |
acDs1ConfigAdminStatusAppian Administrative Status attribute used to set the provisioning state as either activate(1), delete(2) or inactivate(3). Refer to the Appian-SMI.mib file for additional information.rw AcAdminStatus (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.1.1.4 |
acDs1ConfigOpStatusThe operational or actual state of this ds1.ro AcOpStatus (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.1.1.5 |
acDs1ConfigTimeElapsedIntervalThe number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.2785.2.3.4.1.1.6 |
acDs1ConfigValidIntervalsThe number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.ro INTEGER .1.3.6.1.4.1.2785.2.3.4.1.1.7 |
acDs1ConfigTimeElapsedDayThe number of seconds that have elapsed since the beginning of the near end current day error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current day interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.2785.2.3.4.1.1.8 |
acDs1ConfigValidDaysThe number of previous near end days for which data was collected. The value will be 30 unless the interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hr near end days since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.ro INTEGER .1.3.6.1.4.1.2785.2.3.4.1.1.9 |
acDs1ConfigTimeElapsedFarEndIntervalThe number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.2785.2.3.4.1.1.10 |
acDs1ConfigValidFarEndIntervalsThe number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.ro INTEGER .1.3.6.1.4.1.2785.2.3.4.1.1.11 |
acDs1ConfigTimeElapsedFarEndDayThe number of seconds that have elapsed since the beginning of the far end current day error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current day interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.2785.2.3.4.1.1.12 |
acDs1ConfigValidFarEndDaysThe number of previous near end days for which data was collected. The value will be 30 unless the far/near end interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hr far end days since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.ro INTEGER .1.3.6.1.4.1.2785.2.3.4.1.1.13 |
acDs1ConfigLineTypeThis variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: esf Extended SuperFrame DS1 (T1.107) d4 AT&T D4 format DS1 (T1.107)rw Enumeration .1.3.6.1.4.1.2785.2.3.4.1.1.14 |
acDs1ConfigLineCodingThis variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. b8zs refers to the use of a specified pattern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. ami refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density requirements, such as inverting HDLC data.rw Enumeration .1.3.6.1.4.1.2785.2.3.4.1.1.15 |
acDs1ConfigCircuitIdentifierThis variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.rw DisplayString .1.3.6.1.4.1.2785.2.3.4.1.1.16 |
acDs1ConfigLoopbackConfigThis variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in response to a requested loopback state that the interface does not support. The values mean: none Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. payload The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. facility The received signal at this interface does not go through the device (minimum penetration) but is looped back out. other Loopbacks that are not defined here. terminal The transmitted signal at this interface is looped back and received by the same interface. What is transmitted onto the line is product dependent. dual Both acDs1LineLoop and acDs1InwardLoop will be active simultaneously. **NOADMINDOWN**rw Enumeration .1.3.6.1.4.1.2785.2.3.4.1.1.17 |
acDs1ConfigLineStatusThis variable indicates the Line Status of the interface. It contains loopback, failure, received 'alarm' and transmitted 'alarms information. The acDs1ConfigLineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. acDs1NoAlarm must be set if and only if no other flag is set. If the acDs1loopbackState bit is set, the loopback in effect can be determined from the acDs1loopbackConfig object. The various bit positions are: 1 acDs1NoAlarm No alarm present 2 acDs1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm) 4 acDs1XmtFarEndLOF Near end sending LOF Indication 8 acDs1RcvAIS Far end sending AIS 16 acDs1XmtAIS Near end sending AIS 32 acDs1LossOfFrame Near end LOF (a.k.a., Red Alarm) 64 acDs1LossOfSignal Near end Loss Of Signal 128 acDs1LoopbackState Near end is looped 512 acDs1RcvFarEndLOMF Far End Sending TS16 LOMF 1024 acDs1XmtFarEndLOMF Near End Sending TS16 LOMF 2048 acDs1RcvTestCode Near End detects a test code 4096 acDs1RcvFarEndRAI any line status not defined here 8192 acDs1RcvFarEndUnEqp Far End sending VT 1.5 labelled UNEQUIPPED 16384 acDs1NetEquipOOS Carrier Equipment Out of Servicero INTEGER .1.3.6.1.4.1.2785.2.3.4.1.1.18 |
acDs1ConfigSignalMode'none' indicates that no bits are reserved for signaling on this channel. 'message' indicates that Common Chan- nel Signaling is in use on channel 24 of a DS1.ro Enumeration .1.3.6.1.4.1.2785.2.3.4.1.1.19 |
acDs1ConfigTransmitClockSourceThe source of Transmit Clock. 'bits' indicates that recovered receive clock through a bits device is used as the transmit clock. 'localTiming' indicates that a local clock source is used or when an external clock is attached to the box containing the interface. 'throughTiming' indicates that recovered re- ceive clock from another interface is used as the transmit clock.ro Enumeration .1.3.6.1.4.1.2785.2.3.4.1.1.20 |
acDs1ConfigFdlThis bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties. Set any bits that are appropriate: other(1), ansi(2), att(4), none(8) 'other' indicates that a protocol other than one following is used. 'ansi' refers to the FDL exchange recommended by ANSI. 'att' refers to ESF FDL exchanges. 'none' indicates that the device does not use the FDL.ro INTEGER .1.3.6.1.4.1.2785.2.3.4.1.1.21 |
acDs1ConfigInvalidIntervalsThe number of intervals in the range from 0 to acDs1ValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.2785.2.3.4.1.1.22 |
acDs1ConfigInvalidDaysThe number of days in the range from 0 to acDs1ConfigValidDays for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.2785.2.3.4.1.1.23 |
acDs1ConfigInvalidFarEndIntervalsThe number of intervals in the range from 0 to acDs1ConfigValidFarEndIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.2785.2.3.4.1.1.24 |
acDs1ConfigInvalidFarEndDaysThe number of days in the range from 0 to acDs1ConfigValidFarEndDays for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.2785.2.3.4.1.1.25 |
acDs1ConfigLineStatusLastChangeThe value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.4.1.1.26 |
acDs1ConfigLineStatusChangeTrapEnableIndicates whether acDs1ConfigLineStatusChange traps should be generated for this interface.rw Enumeration .1.3.6.1.4.1.2785.2.3.4.1.1.27 |
acDs1ConfigLoopbackStatusThis variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end. The acDs1ConfigLoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 acDs1NoLoopback 2 acDs1NearEndPayloadLoopback 4 acDs1NearEndLineLoopback 8 acDs1NearEndOtherLoopback 16 acDs1NearEndInwardLoopback 32 acDs1FarEndPayloadLoopback 64 acDs1FarEndLineLoopbackro INTEGER .1.3.6.1.4.1.2785.2.3.4.1.1.28 |
acDs1ConfigInterfaceNameA user configurable interface name which can be up to 64 bytes in length which uniquely identifies this DS1 interface.rw DisplayString .1.3.6.1.4.1.2785.2.3.4.1.1.29 |
acDs1ConfigTimeSlotIndexThis index corresponds to the desired timeslot row in the Shared Timeslot Table with a payload type of ds1tdm.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.1.1.30 |
acDs1IntervalTableThe Appian DS1 Interval Table contains various statistics collected by each DS1 Interface over the previous 24 hours of operation as well as over the current period. The past 24 hours are broken into 96 completed 15 minute intervals. The first row in this table (identified by acDs1IntervalNumber=1) represents the current interval statistics. The next 96 rows in this table (represented by acDs1IntervalNumber=2..97) represents one of the past 15 minute intervals. The final row (identified by acDs1IntervalNumber=98) is the total of all the past intervals (2..97). This table is created automatically. SEQUENCE OF AcDs1IntervalEntry .1.3.6.1.4.1.2785.2.3.4.2 |
acDs1IntervalEntryAn entry in the Appian DS1 Interval table. AcDs1IntervalEntry .1.3.6.1.4.1.2785.2.3.4.2.1 |
acDs1IntervalNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.2.1.1 |
acDs1IntervalSlotThe physical slot number for this port.ro AcSlotNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.2.1.2 |
acDs1IntervalPortThe physical port number for this port.ro AcPortNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.2.1.3 |
acDs1IntervalNumberA number between 1 and 98, where 1 is the current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total (sum) of all of the previous completed intervals (2..97).ro INTEGER .1.3.6.1.4.1.2785.2.3.4.2.1.4 |
acDs1IntervalValidStatsThis variable indicates if the data for this interval is valid. For acDs1IntervalNumber=98, this value will only be true if all data is valid for intervals 2..97.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.4.2.1.5 |
acDs1IntervalResetStatsThis variable allows the data for the current interval (acDs1IntervalNumber = 1) to be reset. The acDs1IntervalValidFlag will be set to False after the reset for the current interval. This field has no effect on acDs1IntervalNumber 2..98. This field will always show a value of False when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.4.2.1.6 |
acDs1IntervalESsThe number of Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.2.1.7 |
acDs1IntervalSESsThe number of Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.2.1.8 |
acDs1IntervalSEFSsThe number of Severely Errored Framing Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.2.1.9 |
acDs1IntervalUASsThe number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.2.1.10 |
acDs1IntervalCSSsThe number of Controlled Slip Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.2.1.11 |
acDs1IntervalPCVsThe number of Path Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.2.1.12 |
acDs1IntervalLESsThe number of Line Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.2.1.13 |
acDs1IntervalBESsThe number of Bursty Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.2.1.14 |
acDs1IntervalDMsThe number of Degraded Minutes.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.2.1.15 |
acDs1IntervalLCVsThe number of Line Code Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.2.1.16 |
acDs1DayTableThe Appian DS1 Day Table contains various statistics collected by each DS1 Interface over the previous 30 days of operation as well as over the current day period. The first row in this table (identified by acDs1DayNumber=1) represents the current day statistics. The next 30 rows in this table (represented by acDs1DayNumber=2..31) represents one of the past 24 hr periods (day). This table is created automatically. SEQUENCE OF AcDs1DayEntry .1.3.6.1.4.1.2785.2.3.4.3 |
acDs1DayEntryAn entry in the Appian DS1 Day table. AcDs1DayEntry .1.3.6.1.4.1.2785.2.3.4.3.1 |
acDs1DayNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.3.1.1 |
acDs1DaySlotThe physical slot number of the port.ro AcSlotNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.3.1.2 |
acDs1DayPortThe physical port number of the port.ro AcPortNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.3.1.3 |
acDs1DayNumberA number between 1 and 31, where 1 is the current 24 hour interval in progress (day), 2 is the most recently completed 24 hour interval and 31 is the 24 hour interval completed 29 days prior to interval 1.ro INTEGER .1.3.6.1.4.1.2785.2.3.4.3.1.4 |
acDs1DayValidStatsThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.4.3.1.5 |
acDs1DayResetStatsThis variable allows the data for the current day (acDs1DayIndex = 1) to be reset. The acDs1DayValidFlag will be set to False after the reset for the current day. This field has no effect on acDs1DayIndex 2..31. This field will always show a value of False when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.4.3.1.6 |
acDs1DayESsThe number of Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.3.1.7 |
acDs1DaySESsThe number of Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.3.1.8 |
acDs1DaySEFSsThe number of Severely Errored Framing Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.3.1.9 |
acDs1DayUASsThe number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.3.1.10 |
acDs1DayCSSsThe number of Controlled Slip Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.3.1.11 |
acDs1DayPCVsThe number of Path Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.3.1.12 |
acDs1DayLESsThe number of Line Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.3.1.13 |
acDs1DayBESsThe number of Bursty Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.3.1.14 |
acDs1DayDMsThe number of Degraded Minutes.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.3.1.15 |
acDs1DayLCVsThe number of Line Code Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.3.1.16 |
acDs1FarEndIntervalTableThe DS1 Far End Interval Table contains various statistics collected by each DS1 interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by acDs1FarEndIntervalNumber) for one specific instance (identified by acDs1FarEndIntervalSlot, acDs1FarEndIntervalPort). This table is created automatically. SEQUENCE OF AcDs1FarEndIntervalEntry .1.3.6.1.4.1.2785.2.3.4.4 |
acDs1FarEndIntervalEntryAn entry in the DS1 Far End Interval table. AcDs1FarEndIntervalEntry .1.3.6.1.4.1.2785.2.3.4.4.1 |
acDs1FarEndIntervalNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.4.1.1 |
acDs1FarEndIntervalSlotThe physical slot number of the port.ro AcSlotNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.4.1.2 |
acDs1FarEndIntervalPortThe physical port number of the port.ro AcPortNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.4.1.3 |
acDs1FarEndIntervalNumberA number between 1 and 98, where 1 is current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total of intervals 2..97 (sum).ro INTEGER .1.3.6.1.4.1.2785.2.3.4.4.1.4 |
acDs1FarEndIntervalValidStatsThis variable indicates if the data for this interval is valid. For acDs1FarEndIntervalNumber=98, this value will only be true if all data is valid for intervals 2..97.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.4.4.1.5 |
acDs1FarEndIntervalResetStatsThis variable allows the data for the current interval (acDs1FarEndIntervalNumber = 1) to be reset. The acDs1FarEndIntervalValidFlag will be set to False after the reset for the current interval. This field has no effect on acDs1FarEndIntervalNumber 2..98. This field will always show a value of false when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.4.4.1.6 |
acDs1FarEndIntervalESsThe number of Far End Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.4.1.7 |
acDs1FarEndIntervalSESsThe number of Far End Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.4.1.8 |
acDs1FarEndIntervalSEFSsThe number of Far End Severely Errored Framing Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.4.1.9 |
acDs1FarEndIntervalUASsThe number of Unavailable Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.4.1.10 |
acDs1FarEndIntervalCSSsThe number of Far End Controlled Slip Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.4.1.11 |
acDs1FarEndIntervalLESsThe number of Far End Line Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.4.1.12 |
acDs1FarEndIntervalPCVsThe number of Far End Path Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.4.1.13 |
acDs1FarEndIntervalBESsThe number of Far End Bursty Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.4.1.14 |
acDs1FarEndIntervalDMsThe number of Far End Degraded Minutes.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.4.1.15 |
acDs1FarEndDayTableThe DS1 Far End Day Table contains various statistics collected by each DS1 interface over the previous 30 days of operation. Each row in this table represents a one day interval (identified by acDs1FarEndDayNumber). This table is created automatically. SEQUENCE OF AcDs1FarEndDayEntry .1.3.6.1.4.1.2785.2.3.4.5 |
acDs1FarEndDayEntryAn entry in the DS1 Far End Day table. AcDs1FarEndDayEntry .1.3.6.1.4.1.2785.2.3.4.5.1 |
acDs1FarEndDayNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.5.1.1 |
acDs1FarEndDaySlotThe physical slot number of the port.ro AcSlotNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.5.1.2 |
acDs1FarEndDayPortThe physical port number of the port.ro AcPortNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.5.1.3 |
acDs1FarEndDayNumberA number between 1 and 31, where 1 is current 24 hour day interval in progress, 2 is the most recently completed 24 hour day interval and 31 is the 24 hour day interval completed 29 days prior to interval 2.ro INTEGER .1.3.6.1.4.1.2785.2.3.4.5.1.4 |
acDs1FarEndDayValidStatsThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.4.5.1.5 |
acDs1FarEndDayResetStatsThis variable allows the data for the current day (acDs1FarEndDayIndex = 1) to be reset. The acDs1FarEndDayValidFlag will be set to False after the reset for the current interval. This field has no effect on acDs1FarEndDayIndex 2..31. This field will always show a value of false when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2785.2.3.4.5.1.6 |
acDs1FarEndDayESsThe number of Far End Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.5.1.7 |
acDs1FarEndDaySESsThe number of Far End Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.5.1.8 |
acDs1FarEndDaySEFSsThe number of Far End Severely Errored Framing Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.5.1.9 |
acDs1FarEndDayUASsThe number of Unavailable Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.5.1.10 |
acDs1FarEndDayCSSsThe number of Far End Controlled Slip Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.5.1.11 |
acDs1FarEndDayLESsThe number of Far End Line Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.5.1.12 |
acDs1FarEndDayPCVsThe number of Far End Path Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.5.1.13 |
acDs1FarEndDayBESsThe number of Far End Bursty Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.5.1.14 |
acDs1FarEndDayDMsThe number of Far End Degraded Minutes.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.2785.2.3.4.5.1.15 |
acDs1ThresholdTableThe Appian DS1 Threshold Table allows the user to configure the threshold values for each of the statistics found in the interval table base on the 15 minute interval on the day. This table is created automatically. SEQUENCE OF AcDs1ThresholdEntry .1.3.6.1.4.1.2785.2.3.4.6 |
acDs1ThresholdEntryAn entry in the Appian DS1 Threshold table. AcDs1ThresholdEntry .1.3.6.1.4.1.2785.2.3.4.6.1 |
acDs1ThresholdNodeIdThe node id is the id for this specific node in the OSAP ring.ro AcNodeId (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.6.1.1 |
acDs1ThresholdSlotThe physical slot number of the port.ro AcSlotNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.6.1.2 |
acDs1ThresholdPortThe physical port number of the port.ro AcPortNumber (APPIAN-SMI-MIB) .1.3.6.1.4.1.2785.2.3.4.6.1.3 |
acDs1ThresholdNEIntervalESsThe threshold value for interval number of Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.4 |
acDs1ThresholdNEIntervalSESsThe threshold value for the interval number of Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.5 |
acDs1ThresholdNEIntervalSEFSsThe threshold for the interval number of Severely Errored Framing Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.6 |
acDs1ThresholdNEIntervalUASsThe threshold for the interval number of Unavailable Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.7 |
acDs1ThresholdNEIntervalCSSsThe threshold for the interval number of Controlled Slip Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.8 |
acDs1ThresholdNEIntervalPCVsThe threshold for the interval number of Path Coding Violations. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.9 |
acDs1ThresholdNEIntervalLESsThe threshold value for the interval number of Line Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.10 |
acDs1ThresholdNEIntervalBESsThe threshold for the interval number of Bursty Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.11 |
acDs1ThresholdNEIntervalDMsThe threshold for the interval number of Degraded Minutes. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.12 |
acDs1ThresholdNEIntervalLCVsThe threshold for the interval number of Line Code Violations. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.13 |
acDs1ThresholdNEDayESsThe threshold value for day number of Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.14 |
acDs1ThresholdNEDaySESsThe threshold for the day number of Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.15 |
acDs1ThresholdNEDaySEFSsThe threshold value for the day number of Severely Errored Framing Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.16 |
acDs1ThresholdNEDayUASsThe threshold value for the day number of Unavailable Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.17 |
acDs1ThresholdNEDayCSSsThe threshold for the day number of Controlled Slip Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.18 |
acDs1ThresholdNEDayPCVsThe threshold value for the day number of Path Coding Violations. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.19 |
acDs1ThresholdNEDayLESsThe threshold for the day number of Line Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.20 |
acDs1ThresholdNEDayBESsThe threshold for the day number of Bursty Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.21 |
acDs1ThresholdNEDayDMsThe threshold for the day number of Degraded Minutes. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.22 |
acDs1ThresholdNEDayLCVsThe threshold for the day number of Line Code Violations. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.23 |
acDs1ThresholdFEIntervalESsThe threshold for the far end interval number of Far End Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.24 |
acDs1ThresholdFEIntervalSESsThe threshold for the far end interval number of Far End Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.25 |
acDs1ThresholdFEIntervalSEFSsThe threshold for the far end interval number of Far End Severely Errored Framing Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.26 |
acDs1ThresholdFEIntervalUASsThe threshold value for the far end interval number of Unavailable Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.27 |
acDs1ThresholdFEIntervalCSSsThe threshold value for the far end interval number of Far End Controlled Slip Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.28 |
acDs1ThresholdFEIntervalLESsThe threshold value for the far end interal number of Far End Line Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.29 |
acDs1ThresholdFEIntervalPCVsThe threshold for the far end internal number of Far End Path Coding Violations. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.30 |
acDs1ThresholdFEIntervalBESsThe threshold for the far end interval number of Far End Bursty Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.31 |
acDs1ThresholdFEIntervalDMsThe threshold for the far end interval number of Far End Degraded Minutes. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.32 |
acDs1ThresholdFEDayESsThe threshold for the far end day number of Far End Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.33 |
acDs1ThresholdFEDaySESsThe threshold for the far end day number of Far End Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.34 |
acDs1ThresholdFEDaySEFSsThe threshold for the far end day number of Far End Severely Errored Framing Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.35 |
acDs1ThresholdFEDayUASsThe threshold value for the far end day number of Unavailable Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.36 |
acDs1ThresholdFEDayCSSsThe threshold value for the far end day number of Far End Controlled Slip Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.37 |
acDs1ThresholdFEDayLESsThe threshold value for the far end interal number of Far End Line Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.38 |
acDs1ThresholdFEDayPCVsThe threshold for the far end internal number of Far End Path Coding Violations. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.39 |
acDs1ThresholdFEDayBESsThe threshold for the far end day number of Far End Bursty Errored Seconds. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.40 |
acDs1ThresholdFEDayDMsThe threshold for the far end day number of Far End Degraded Minutes. A value of 0 disables the threshold mechanism for this attribute.rw INTEGER .1.3.6.1.4.1.2785.2.3.4.6.1.41 |