ANIC-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ANIC-MIB.
23
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
usr OBJECT IDENTIFIER .1.3.6.1.4.1.429 |
RFC1213-MIB Unknown .1.3.6.1.4.1.429 |
nas OBJECT IDENTIFIER .1.3.6.1.4.1.429.1 |
anic OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.7 |
anicCmd OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.7.1 |
anicCmdTableThe NIC Command table contains an entry for each of the
manageable Analog Modem NIC entity in the chassis. It
provides a means through which to take specific actions on
one or more NICs in the NAS chassis. SEQUENCE OF AnicCmdEntry .1.3.6.1.4.1.429.1.7.1.1 |
anicCmdEntryThere is one NIC Command entry per NIC entity in the
chassis. AnicCmdEntry .1.3.6.1.4.1.429.1.7.1.1.1 |
anicCmdIndexA unique value for each manageable Analog Modem NIC entity
in the chassis. The value of this object matches the value
of the index of the corresponding manageable Analog Modem
NIC entity in the entity table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.7.1.1.1.1 |
anicCmdMgtStationIdThis object is a generic read-write variable that a
Management Station (MS) can use to guarantee that the
results from a given command are the results of a command
issued by that specific MS. Each MS must SET a unique
value to this object when doing commands and GET the value
of this object together with amnicCmdReqId and
amnicCmdResult to detect interference from other MSs.rw OCTET STRING .1.3.6.1.4.1.429.1.7.1.1.1.2 |
anicCmdReqIdThis object contains the value of the request-id field in
the SNMP PDU which invoked the current or most recent
command or test on this NIC Card. If the request-id is
unknown or undefined, this object contains the value zero.ro INTEGER .1.3.6.1.4.1.429.1.7.1.1.1.3 |
anicCmdFunctionThis object contains a value which describes the command
which is being invoked.rw Enumeration .1.3.6.1.4.1.429.1.7.1.1.1.4 |
anicCmdForceIn some cases, the NIC may be in a state such that certain
commands could adversely affect connections. In such
cases, a command request with this object not present or
set to noForce will result in a warning. If the operator
elects to ignore such warnings, this object can be set to
force in a subsequent issue of the command to cause the
command to be carried out regardless of its potentially
hazzardous effects.rw Enumeration .1.3.6.1.4.1.429.1.7.1.1.1.5 |
anicCmdParamThis object contains parameters that are specific to the
particular command being issued. In some cases, there will
be no aditional parameters required.rw OCTET STRING .1.3.6.1.4.1.429.1.7.1.1.1.6 |
anicCmdResultThis object contains the result of the most recently
requested command or test, or the value none(1) if no
commands have been requested since the last reset.ro Enumeration .1.3.6.1.4.1.429.1.7.1.1.1.7 |
anicCmdCodeThe value of this object upon test completion is dependent
on the value of nicCmdFunction used to invoke the command.
In the case of action commands, the value of this object is
zero if the command was successful, and indicates a further
description of what went wrong if it was unsuccessful. In
the case of tests, the value here is a bit mapped result of
each of the sub-tests performed.ro Enumeration .1.3.6.1.4.1.429.1.7.1.1.1.8 |
anicCfg OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.7.2 |
anicCfgTableThe NIC Configuration table contains an entry for each
entity in the NIC. It provides a means through which to
configure an individual entity. SEQUENCE OF AnicCfgEntry .1.3.6.1.4.1.429.1.7.2.1 |
anicCfgEntryThere is one NIC configure entry per NIC entity in the
chassis. AnicCfgEntry .1.3.6.1.4.1.429.1.7.2.1.1 |
anicCfgIndexA unique value for each entity in the Analog Modem NIC
card.ro INTEGER .1.3.6.1.4.1.429.1.7.2.1.1.1 |
anicCfgMdmRingNATrapEnaEnable or disable the modem ring no answer event.rw Enumeration .1.3.6.1.4.1.429.1.7.2.1.1.2 |
anicCfgDteRingNATrapEnaEnable or Disable the DTE ring no answer event.rw Enumeration .1.3.6.1.4.1.429.1.7.2.1.1.3 |
anicCfgRingThreshSet up the number of ring threshold for the ring no answer
events.rw INTEGER .1.3.6.1.4.1.429.1.7.2.1.1.4 |
anicCfgLineStatusThis object is used to specify the line status.ro Enumeration .1.3.6.1.4.1.429.1.7.2.1.1.5 |