ALCATEL-IND1-TEST-OAM-MIB
AI MIB Summary
The ALCATEL-IND1-TEST-OAM-MIB facilitates the remote monitoring and operational administration of Alcatel-Lucent "Birds Of Prey" CPE test head hardware, specifically enabling the retrieval of OAM (Operations, Administration, and Maintenance) status indicators and diagnostic counters for enterprise network testing equipment.
This module describes an authoritative enterprise- specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line CPE test head.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1TestOamMIB.softentIND1TestOam.1
157
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
157 total| Object Name |
|---|
alcatelIND1TestOamMIBThis module describes an authoritative enterprise-
specific Simple Network Management Protocol (SNMP) Management
Information Base (MIB):
For the Birds Of Prey Product Line
CPE test head.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect,
special, or consequential damages whatsoever arising from or
related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .softentIND1TestOam.1 |
alaTestOamNotifications OBJECT IDENTIFIER .softentIND1TestOam.1.0 |
alaTestOamTxDoneTrapThis trap shall be send to NMS from Generator DUT, once the
test-duration has expired on it. Once the test-duration has
expired the Generator DUT shall send this trap after some
time interval to NMS (around 5 to 10 sec). NOTIFICATION-TYPE .softentIND1TestOam.1.0.1 |
alaTestOamRxReadyTrapThis trap shall be send to NMS once the DUT with Analyzer or
Loopback Role is ready to receive the test traffic. Once this
trap is received on NMS the Generator shall be activated for
generating the test traffic. NOTIFICATION-TYPE .softentIND1TestOam.1.0.2 |
alaTestOamTestAbortTrapThis trap shall be send to NMS from the DUT, if the
Test is aborted during takeover or if any of the NI goes down. NOTIFICATION-TYPE .softentIND1TestOam.1.0.3 |
alaTestOamGroupTxDoneTrapThis trap shall be send to NMS from Generator DUT, once the
test-duration for the Test OAM Group has expired on it.
Once the test-duration has expired the Generator DUT shall
send this trap after some time interval to NMS (around 5 to 10 sec). NOTIFICATION-TYPE .softentIND1TestOam.1.0.4 |
alaTestOamGroupRxReadyTrapThis trap shall be send to NMS once the DUT with Analyzer or
Loopback Role is ready to receive the test traffic. Once this
trap is received on NMS the Generator shall be activated for
generating the test traffic for the Test OAM Group. NOTIFICATION-TYPE .softentIND1TestOam.1.0.5 |
alaTestOamGroupAbortTrapThis trap shall be send to NMS from the DUT, if the Test is aborted
for Test OAM Group during takeover or if any of the NI goes down. NOTIFICATION-TYPE .softentIND1TestOam.1.0.6 |
alaTestOamStatsWriteDoneTrapThis trap shall be send to NMS from the DUT, if the maximum number of stats records (64) have
been written to the testoam stats file maintained in /flash NOTIFICATION-TYPE .softentIND1TestOam.1.0.7 |
alaTestOamMIBObjects OBJECT IDENTIFIER .softentIND1TestOam.1.1 |
alaTestOamClearStats OBJECT IDENTIFIER .softentIND1TestOam.1.1.1 |
alaTestOamGlobalClearStatsDefines the global clear statistics control for test OAM
The value reset (2) indicates that clear all statistic counters.rw Enumeration .softentIND1TestOam.1.1.1.1 |
alaTestOamStatus OBJECT IDENTIFIER .softentIND1TestOam.1.1.2 |
alaTestOamConfig OBJECT IDENTIFIER .softentIND1TestOam.1.1.3 |
alaTestOamConfigTableDefines the test oam config table for providing, via SNMP, the
capability of performing Test OAM operation. SEQUENCE OF AlaTestOamConfigEntry .softentIND1TestOam.1.1.3.1 |
alaTestOamConfigEntryThe Config table entry AlaTestOamConfigEntry .softentIND1TestOam.1.1.3.1.1 |
alaTestOamConfigTestIdUnique name to identify the entries in the table.ro SnmpAdminString .softentIND1TestOam.1.1.3.1.1.1 |
alaTestOamConfigSourceEndpointThis Object is to identify the local or transmitting DUT.
For bidirectional test, this also identifies the analyzer
DUT.rw SnmpAdminString .softentIND1TestOam.1.1.3.1.1.2 |
alaTestOamConfigDestinationEndpointThis Object is to identify the remote DUT. For unidirectional,
this identifies the analyzer DUT. For bidirectional test, this
identifies the DUT that needs to activate the loopback function.rw SnmpAdminString .softentIND1TestOam.1.1.3.1.1.3 |
alaTestOamConfigTestDescriptionDescprition of the test.rw SnmpAdminString .softentIND1TestOam.1.1.3.1.1.4 |
alaTestOamConfigGeneratorTestModeIndicates the test mode for the generator.rw Enumeration .softentIND1TestOam.1.1.3.1.1.5 |
alaTestOamConfigAnalyzerTestModeIndicates the test mode for the analyzer.rw Enumeration .softentIND1TestOam.1.1.3.1.1.6 |
alaTestOamConfigLoopbackTestModeIndicates the test mode for the loopback.rw Enumeration .softentIND1TestOam.1.1.3.1.1.7 |
alaTestOamConfigDirectionIdentifies the test direction.rw Enumeration .softentIND1TestOam.1.1.3.1.1.8 |
alaTestOamConfigFrameSrcMacAddressThe source mac-address of the test frame.rw MacAddress (SNMPv2-TC) .softentIND1TestOam.1.1.3.1.1.9 |
alaTestOamConfigFrameDstMacAddressThe destination mac-address of the test frame.rw MacAddress (SNMPv2-TC) .softentIND1TestOam.1.1.3.1.1.10 |
alaTestOamConfigDurationThe duration of the test for which traffic generator shall be active.rw Integer32 .softentIND1TestOam.1.1.3.1.1.11 |
alaTestOamConfigVlanThe vlan required for traffic analysis and test frame accounting.rw VlanId (Q-BRIDGE-MIB) .softentIND1TestOam.1.1.3.1.1.12 |
alaTestOamConfigRoleThe role of the DUT based on the direction.rw Enumeration .softentIND1TestOam.1.1.3.1.1.13 |
alaTestOamConfigPortThe port to be used in the testing.Depending on the role this port
shall have different interpretation.
Generator - port generating the frame.
Loopback - This port shall be the port where Loopback of the traffic
shall take place.
Analyzer - Port configuration is not required.rw InterfaceIndex (IF-MIB) .softentIND1TestOam.1.1.3.1.1.14 |
alaTestOamConfigSourceLearningStatusIdentify whether the Source Learning PDUs to be transmitted or notro Enumeration .softentIND1TestOam.1.1.3.1.1.15 |
alaTestOamConfigGeneratorModeThe option of configuring traffic generator mode.rw Enumeration .softentIND1TestOam.1.1.3.1.1.16 |
alaTestOamConfigGeneratorBandwidthThe rate at which traffic generator shall generate the traffic.
The Value specified should be a multiple of 8rw Integer32 .softentIND1TestOam.1.1.3.1.1.17 |
alaTestOamConfigGeneratorPacketSizeThe size of packets in bytes.rw Integer32 .softentIND1TestOam.1.1.3.1.1.18 |
alaTestOamConfigTestIdStateIndicates whether to start or stop the OAM test.rw Enumeration .softentIND1TestOam.1.1.3.1.1.19 |
alaTestOamConfigTestIdStatusThe Test status.ro Enumeration .softentIND1TestOam.1.1.3.1.1.20 |
alaTestOamConfigFrameTypeThe type of frame.ro Enumeration .softentIND1TestOam.1.1.3.1.1.21 |
alaTestOamConfigRowStatusRow Status for initiating a MIB retrieval request.rw RowStatus (SNMPv2-TC) .softentIND1TestOam.1.1.3.1.1.23 |
alaTestOamConfigRemoteStatsFetchStateIndicates whether to fetch remote stats for Test OAM test.rw Enumeration .softentIND1TestOam.1.1.3.1.1.24 |
alaTestOamConfigRemoteSysMacAddressThe Remote device's system mac-addressrw MacAddress (SNMPv2-TC) .softentIND1TestOam.1.1.3.1.1.25 |
alaTestOamEtherConfigTableThis table contains the configs which are specific to L2 SEQUENCE OF AlaTestOamEtherConfigEntry .softentIND1TestOam.1.1.3.2 |
alaTestOamEtherConfigEntryThe L2 packet configuration table. AlaTestOamEtherConfigEntry .softentIND1TestOam.1.1.3.2.1 |
alaTestOamEtherConfigVlanThe customer vlan for the packet.rw VlanId (Q-BRIDGE-MIB) .softentIND1TestOam.1.1.3.2.1.1 |
alaTestOamEtherConfig8021pSpecifies the priority in the generated test frame.rw Unsigned32 .softentIND1TestOam.1.1.3.2.1.2 |
alaTestOamEtherConfigDataPatternThe data pattern present in the generated test frame.rw OCTET STRING .softentIND1TestOam.1.1.3.2.1.3 |
alaTestOamEtherConfigEtherTypeSpecifies the ether-type for the L2 packet.rw Integer32 .softentIND1TestOam.1.1.3.2.1.4 |
alaTestOamEtherConfigCfiSpecifies the CFI bit present in the generated test frame.rw TruthValue (SNMPv2-TC) .softentIND1TestOam.1.1.3.2.1.5 |
alaTestOamEtherConfigRowStatusThe status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .softentIND1TestOam.1.1.3.2.1.6 |
alaTestOamIpv4ConfigTableThis table contains the configs which are specific to IPv4. SEQUENCE OF AlaTestOamIpv4ConfigEntry .softentIND1TestOam.1.1.3.3 |
alaTestOamIpv4ConfigEntryThe IPv4 packet configuration table. AlaTestOamIpv4ConfigEntry .softentIND1TestOam.1.1.3.3.1 |
alaTestOamIpv4ConfigVlanIndicates the customer vlan for the packet.rw VlanId (Q-BRIDGE-MIB) .softentIND1TestOam.1.1.3.3.1.1 |
alaTestOamIpv4Config8021pSpecifies the priority in the alaTestOamStats generated test frame.rw Unsigned32 .softentIND1TestOam.1.1.3.3.1.2 |
alaTestOamIpv4ConfigDataPatternThe data pattern present in the generated test frame.rw OCTET STRING .softentIND1TestOam.1.1.3.3.1.3 |
alaTestOamIpv4ConfigCfiSpecifies the CFI bit present in the generated test framerw TruthValue (SNMPv2-TC) .softentIND1TestOam.1.1.3.3.1.4 |
alaTestOamIpv4ConfigSrcIpTypeSpecifies the InetAddress type of host address to be used as the host
for performing a ping operation.rw InetAddressType(1|2) .softentIND1TestOam.1.1.3.3.1.5 |
alaTestOamIpv4ConfigSrcIpSpecifies the source IP of the generated test framerw InetAddress (INET-ADDRESS-MIB) .softentIND1TestOam.1.1.3.3.1.6 |
alaTestOamIpv4ConfigDstIpTypeSpecifies the InetAddress type of host address to be used as the destination
for performing a ping operation.rw InetAddressType(1|2) .softentIND1TestOam.1.1.3.3.1.7 |
alaTestOamIpv4ConfigDstIpSpecifies the destination IP of the generated test frame.rw InetAddress (INET-ADDRESS-MIB) .softentIND1TestOam.1.1.3.3.1.8 |
alaTestOamIpv4ConfigSrcPortSpecifies the source port of the generated test frame.rw Integer32 .softentIND1TestOam.1.1.3.3.1.9 |
alaTestOamIpv4ConfigDstPortSpecifies the destination port of the generated test frame.rw Integer32 .softentIND1TestOam.1.1.3.3.1.10 |
alaTestOamIpv4ConfigNxtHeaderSpecifies the information about the packet. Whether it is for
TCP or UDP socket.rw Enumeration .softentIND1TestOam.1.1.3.3.1.11 |
alaTestOamIpv4ConfigTtlIndicates the Time to Live of the generated test frame.rw Integer32 .softentIND1TestOam.1.1.3.3.1.12 |
alaTestOamIpv4ConfigTosIndicates the Type of Service for the generated test frame.rw Integer32 .softentIND1TestOam.1.1.3.3.1.13 |
alaTestOamIpv4ConfigRowStatusThe status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .softentIND1TestOam.1.1.3.3.1.14 |
alaTestOamIPConfigFlowLabelThe flow identifier or Flow Label in an IPv6 packet header that
may be used to discriminate traffic flows.rw Integer32 .softentIND1TestOam.1.1.3.3.1.15 |
alaTestOamStats OBJECT IDENTIFIER .softentIND1TestOam.1.1.4 |
alaTestOamStatsTableThis table contains the statisitics of the tests performed. SEQUENCE OF AlaTestOamStatsEntry .softentIND1TestOam.1.1.4.1 |
alaTestOamStatsEntryThe test result's stats table. AlaTestOamStatsEntry .softentIND1TestOam.1.1.4.1.1 |
alaTestOamStatsClearStatsDefines the clear statistics control for test OAM for a particular
test id. The value reset (2) indicates that clear all statistic counters.rw Enumeration .softentIND1TestOam.1.1.4.1.1.1 |
alaTestOamTxIngressCounterThis counter represents the number of test frames that have
been sent from the source port in the generator.ro Counter64 .softentIND1TestOam.1.1.4.1.1.2 |
alaTestOamTxEgressCounterThis counter represents the number of test frames that have
been sent out of the generator.ro Counter64 .softentIND1TestOam.1.1.4.1.1.3 |
alaTestOamRxIngressCounterThis counter represents the number of test frames that have
been received on the analyzer .ro Counter64 .softentIND1TestOam.1.1.4.1.1.4 |
alaTestOamRemoteStatsCounterThis counter represents the number of test frames that have been received by the Analyzer and fetched by the sender device.
iteration.ro Counter64 .softentIND1TestOam.1.1.4.1.1.5 |
alaTestOamBandwidthThroughputThe traffic throughput at the Generatorro Integer32 .softentIND1TestOam.1.1.4.1.1.6 |
alaTestOamBandwidthThroughputStrThe traffic throughput at the Generator in String Formatro SnmpAdminString (SNMP-FRAMEWORK-MIB) .softentIND1TestOam.1.1.4.1.1.7 |
alaTestOamGroupClearStats OBJECT IDENTIFIER .softentIND1TestOam.1.1.5 |
alaTestOamGlobalGroupClearStatsDefines the global clear statistics control for Test OAM Group.
The value reset (2) indicates that clear all Group statistic counters.rw Enumeration .softentIND1TestOam.1.1.5.1 |
alaTestOamFeederPort OBJECT IDENTIFIER .softentIND1TestOam.1.1.6 |
alaTestOamGlobalFeederPortThe port to be used to feed the test traffic only to generator port of a group.
If the feeder port value is zero, it implies that feeder port is not created in the system.rw InterfaceIndex (IF-MIB) .softentIND1TestOam.1.1.6.1 |
alaTestOamGroupConfig OBJECT IDENTIFIER .softentIND1TestOam.1.1.7 |
alaTestOamGroupConfigTableDefines Test OAM Group Config Table For Providing SNMP
Capability to Perform Test OAM operation. SEQUENCE OF AlaTestOamGroupConfigEntry .softentIND1TestOam.1.1.7.1 |
alaTestOamGroupConfigEntryThe Test OAM Group Config Table Entry. AlaTestOamGroupConfigEntry .softentIND1TestOam.1.1.7.1.1 |
alaTestOamConfigGroupIdUnique Name to Identify the Test OAM
Group entries in the table.ro SnmpAdminString .softentIND1TestOam.1.1.7.1.1.1 |
alaTestOamGroupConfigSourceEndpointThis Object is to identify the local or transmitting DUT for test group.
For bidirectional test, this also identifies the analyzer
DUT.rw SnmpAdminString .softentIND1TestOam.1.1.7.1.1.2 |
alaTestOamGroupConfigDestinationEndpointThis Object is to identify the remote DUT for test group. For unidirectional,
this identifies the analyzer DUT. For bidirectional test, this
identifies the DUT that needs to activate the loopback function.rw SnmpAdminString .softentIND1TestOam.1.1.7.1.1.3 |
alaTestOamConfigGroupDescriptionDescription of the Test OAM Group.rw SnmpAdminString .softentIND1TestOam.1.1.7.1.1.4 |
alaTestOamGroupConfigDirectionIndicates the Test OAM Group Direction.rw Enumeration .softentIND1TestOam.1.1.7.1.1.5 |
alaTestOamGroupConfigDurationThe Duration of the Test of the Test OAM Group for Which Traffic Generator shall be active.rw Integer32 .softentIND1TestOam.1.1.7.1.1.6 |
alaTestOamGroupConfigRoleThe Role of the DUT Based On the Direction.rw Enumeration .softentIND1TestOam.1.1.7.1.1.7 |
alaTestOamGroupConfigPortThe Port to be Used in the Testing.Depending on the Role this Port
Shall have different interpretation.
Generator - Port Generating the Frame.
Loopback - This Port Shall be the Port Where Loopback of the Traffic
Shall Take Place.
Analyzer - Port Configuration is not Required.rw InterfaceIndex (IF-MIB) .softentIND1TestOam.1.1.7.1.1.8 |
alaTestOamGroupConfigGeneratorBandwidthThe Rate at Which Traffic Generator Shall Generate the Traffic for the Test OAM Group.
The Value specified should be a multiple of 8.
The value '0' signifies flow bandwidth will be used for the grouprw Integer32 .softentIND1TestOam.1.1.7.1.1.9 |
alaTestOamGroupConfigStateIndicates Whether to Start or Stop the Test OAM Group.rw Enumeration .softentIND1TestOam.1.1.7.1.1.10 |
alaTestOamGroupConfigStatusTest OAM Group Status.ro Enumeration .softentIND1TestOam.1.1.7.1.1.11 |
alaTestOamGroupConfigFlowCountThe number of test flows associated with the Test OAM Group.ro Integer32 .softentIND1TestOam.1.1.7.1.1.12 |
alaTestOamGroupConfigStatsClearDefines the Clear Statistics Control for a particular
Test OAM Group. The Value reset (2) indicates that Clear
All Statistic Counters.rw Enumeration .softentIND1TestOam.1.1.7.1.1.13 |
alaTestOamGroupConfigRowStatusRow Status for Creating or Deleting a Test OAM Group in the Table.rw RowStatus (SNMPv2-TC) .softentIND1TestOam.1.1.7.1.1.14 |
alaTestOamGroupConfigRemoteStatsFetchStateIndicates whether to fetch remote stats for Test OAM group test.rw Enumeration .softentIND1TestOam.1.1.7.1.1.15 |
alaTestOamGroupConfigRemoteSysMacAddressThe Remote device's system mac-addressrw MacAddress (SNMPv2-TC) .softentIND1TestOam.1.1.7.1.1.16 |
alaTestOamGroupFlowConfig OBJECT IDENTIFIER .softentIND1TestOam.1.1.8 |
alaTestOamGroupFlowConfigTableThis Table Contains The Test Flows Associated To The
Test OAM Group And the Test Flow Parameters. SEQUENCE OF AlaTestOamGroupFlowConfigEntry .softentIND1TestOam.1.1.8.1 |
alaTestOamGroupFlowConfigEntryThe Test OAM Group Flow Config Table Entry. AlaTestOamGroupFlowConfigEntry .softentIND1TestOam.1.1.8.1.1 |
alaTestOamGroupFlowFrameSrcMacAddressThe Source MAC Address Of The Test Frame.ro MacAddress (SNMPv2-TC) .softentIND1TestOam.1.1.8.1.1.1 |
alaTestOamGroupFlowFrameDstMacAddressThe Destination MAC-Address Of The Test Frame.ro MacAddress (SNMPv2-TC) .softentIND1TestOam.1.1.8.1.1.2 |
alaTestOamGroupFlowVlanThe Vlan Required For Traffic Analysis And Test Frame Accounting.ro VlanId (Q-BRIDGE-MIB) .softentIND1TestOam.1.1.8.1.1.3 |
alaTestOamGroupFlowGeneratorBandwidthThe Rate at Which Traffic Generator Shall Generate the Traffic.
The Value specified should be a multiple of 8.ro Integer32 .softentIND1TestOam.1.1.8.1.1.4 |
alaTestOamGroupFlowGeneratorPacketSizeThe Size Of Packets In Bytes.ro Integer32 .softentIND1TestOam.1.1.8.1.1.5 |
alaTestOamGroupFlowConfigRowStatusRow Status for associating a flow to Group.rw RowStatus (SNMPv2-TC) .softentIND1TestOam.1.1.8.1.1.6 |
alaTestOamGroupFlowStats OBJECT IDENTIFIER .softentIND1TestOam.1.1.9 |
alaTestOamGroupFlowStatsTableThis Table Contains the Statisitics Of the Test OAM Groups Executed. SEQUENCE OF AlaTestOamGroupFlowStatsEntry .softentIND1TestOam.1.1.9.1 |
alaTestOamGroupFlowStatsEntryThe Test OAM Group Stats table. AlaTestOamGroupFlowStatsEntry .softentIND1TestOam.1.1.9.1.1 |
alaTestOamGroupFlowTxIngressCounterThis Counter Represents the Number Of Test Frames for a Test OAM Group
That Have Been Sent From The Source Port In The Generator.ro Counter64 .softentIND1TestOam.1.1.9.1.1.1 |
alaTestOamGroupFlowTxEgressCounterThis Counter Represents the Number Of Test Frames That Have
Been Sent Out Of the Generator.ro Counter64 .softentIND1TestOam.1.1.9.1.1.2 |
alaTestOamGroupFlowRxIngressCounterThis Counter Represents The Number Of Test Frames That Have
Been Received On The Analyzer .ro Counter64 .softentIND1TestOam.1.1.9.1.1.3 |
alaTestOamGroupFlowRemoteStatsCounterThis counter represents the number of test frames that have been received by the Analyzer and fetched by the sender device.ro Counter64 .softentIND1TestOam.1.1.9.1.1.4 |
alaTestOamGroupBandwidthThroughputThe traffic throughput at the Generatorro Integer32 .softentIND1TestOam.1.1.9.1.1.5 |
alaTestOamGroupBandwidthThroughputStrThe traffic throughput at the Generator in String Formatro SnmpAdminString (SNMP-FRAMEWORK-MIB) .softentIND1TestOam.1.1.9.1.1.6 |
alaTestOamSaaConfig OBJECT IDENTIFIER .softentIND1TestOam.1.1.10 |
alaTestOamSaaConfigTableThis table contains the SAA config for a particular test SEQUENCE OF AlaTestOamSaaConfigEntry .softentIND1TestOam.1.1.10.1 |
alaTestOamSaaConfigEntryThe L2 SAA configuration table. AlaTestOamSaaConfigEntry .softentIND1TestOam.1.1.10.1.1 |
alaTestOamSaaConfigDropEligibleDrop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame.rw TruthValue (SNMPv2-TC) .softentIND1TestOam.1.1.10.1.1.1 |
alaTestOamSaaConfigPayloadSizeSpecifies the size of the MAC-Ping payload to be used for the MAC-Ping operation.rw Integer32 .softentIND1TestOam.1.1.10.1.1.2 |
alaTestOamSaaConfigNumPktsSpecifies the number of packets to be sent in one MAC-Ping iteration.rw Integer32 .softentIND1TestOam.1.1.10.1.1.3 |
alaTestOamSaaConfigInterPktDelaySpecifies the delay between two consecutive packets transmitted
during a MAC-Ping iteration.The value specified should be a multiple
of 100.rw Integer32 .softentIND1TestOam.1.1.10.1.1.4 |
alaTestOamSaaConfigVlanPrioritySpecifies both the internal priority of the Mac ping and
the 802.1p value on the vlan tag header. Default is 0.rw Integer32 .softentIND1TestOam.1.1.10.1.1.5 |
alaTestOamSaaConfigRowStatusRow Status for Creating or Deleting a SAA in the Table.rw RowStatus (SNMPv2-TC) .softentIND1TestOam.1.1.10.1.1.6 |
alaTestOamSaaContinuousSpecifies the SAA session will be run continuously until the testoam session endsrw Integer32 .softentIND1TestOam.1.1.10.1.1.7 |
alaTestOamSaaStats OBJECT IDENTIFIER .softentIND1TestOam.1.1.11 |
alaTestOamSaaStatsTableThis table contains the SAA statistics for a particular test. SEQUENCE OF AlaTestOamSaaStatsEntry .softentIND1TestOam.1.1.11.1 |
alaTestOamSaaStatsEntryThe Saa test result's stats table. AlaTestOamSaaStatsEntry .softentIND1TestOam.1.1.11.1.1 |
alaTestOamSaaPktsSentSpecifies the number of packets sent during a single MAC-Ping
iteration.ro Unsigned32 .softentIND1TestOam.1.1.11.1.1.1 |
alaTestOamSaaPktsRcvdSpecifies the number of packets received during a single MAC-Ping
iterationro Unsigned32 .softentIND1TestOam.1.1.11.1.1.2 |
alaTestOamSaaRunTimeThe date and time at which the iteraton was run.ro DateAndTime (SNMPv2-TC) .softentIND1TestOam.1.1.11.1.1.3 |
alaTestOamSaaMinRTTThe minimum round trip time.ro Integer32 UNITS "micro-seconds" .softentIND1TestOam.1.1.11.1.1.4 |
alaTestOamSaaAvgRTTThe average round trip time.ro Integer32 UNITS "micro-seconds" .softentIND1TestOam.1.1.11.1.1.5 |
alaTestOamSaaMaxRTTThe maximum round trip time.ro Integer32 UNITS "micro-seconds" .softentIND1TestOam.1.1.11.1.1.6 |
alaTestOamSaaMinJitterThe minimum jitter value.ro Integer32 .softentIND1TestOam.1.1.11.1.1.7 |
alaTestOamSaaAvgJitterThe average jitter value.ro Integer32 .softentIND1TestOam.1.1.11.1.1.8 |
alaTestOamSaaMaxJitterThe maximum jitter value.ro Integer32 .softentIND1TestOam.1.1.11.1.1.9 |
alaTestOamGroupFlowSaaStats OBJECT IDENTIFIER .softentIND1TestOam.1.1.12 |
alaTestOamGroupFlowSaaStatsTableThis Table Contains the SAA Statisitics Of the Test OAM Groups Executed. SEQUENCE OF AlaTestOamGroupFlowSaaStatsEntry .softentIND1TestOam.1.1.12.1 |
alaTestOamGroupFlowSaaStatsEntryThe Test OAM Group SAA Stats table. AlaTestOamGroupFlowSaaStatsEntry .softentIND1TestOam.1.1.12.1.1 |
alaTestOamGroupFlowSaaPktsSentSpecifies the number of packets sent during a single MAC-Ping
iteration.ro Unsigned32 .softentIND1TestOam.1.1.12.1.1.1 |
alaTestOamGroupFlowSaaPktsRcvdSpecifies the number of packets received during a single MAC-Ping
iterationro Unsigned32 .softentIND1TestOam.1.1.12.1.1.2 |
alaTestOamGroupFlowSaaRunTimeThe date and time at which the iteraton was run.ro DateAndTime (SNMPv2-TC) .softentIND1TestOam.1.1.12.1.1.3 |
alaTestOamGroupFlowSaaMinRTTThe minimum round trip time.ro Integer32 UNITS "micro-seconds" .softentIND1TestOam.1.1.12.1.1.4 |
alaTestOamGroupFlowSaaAvgRTTThe average round trip time.ro Integer32 UNITS "micro-seconds" .softentIND1TestOam.1.1.12.1.1.5 |
alaTestOamGroupFlowSaaMaxRTTThe maximum round trip time.ro Integer32 UNITS "micro-seconds" .softentIND1TestOam.1.1.12.1.1.6 |
alaTestOamGroupFlowSaaMinJitterThe minimum jitter value.ro Integer32 .softentIND1TestOam.1.1.12.1.1.7 |
alaTestOamGroupFlowSaaAvgJitterThe average jitter value.ro Integer32 .softentIND1TestOam.1.1.12.1.1.8 |
alaTestOamGroupFlowSaaMaxJitterThe maximum jitter value.ro Integer32 .softentIND1TestOam.1.1.12.1.1.9 |
alaTestOamStatsFlashSave OBJECT IDENTIFIER .softentIND1TestOam.1.1.13 |
alaTestOamGlobalStatsFlashSaveDefines the stats saving to the flash control for test OAM for a particular test id or group.
The value enable (1) indicates that stats to be saved to flash after the test completion
and value disable (2) indicates that stats will not be saved to flash filerw Enumeration .softentIND1TestOam.1.1.13.1 |
alaTestOamTrapObj OBJECT IDENTIFIER .softentIND1TestOam.1.1.14 |
alaTestOamStatsWriteDoneTrapStrThe string mentioning that the maximum of records have been writen on flash filero SnmpAdminString (SNMP-FRAMEWORK-MIB) .softentIND1TestOam.1.1.14.1 |
alaTestOamConformance OBJECT IDENTIFIER .softentIND1TestOam.1.2 |
alaTestOamMIBCompliances OBJECT IDENTIFIER .softentIND1TestOam.1.2.1 |
alaTestOamMIBGroups OBJECT IDENTIFIER .softentIND1TestOam.1.2.2 |