ALCATEL-IND1-LAG-MIB
AI MIB Summary
The ALCATEL-IND1-LAG-MIB enables SNMP-based monitoring and configuration of Link Aggregation Groups (LAGs) on Alcatel-Lucent FALCON network devices, specifically tracking aggregate interface states, member port status, and traffic statistics in compliance with the IEEE 802.3ad standard.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
The Link Aggregation module for managing ALCATEL FALCON product This MIB is an image of the 802.3ad standard. The aim of this proprietary MIB is to allow the creation of aggregate objects with their size.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1LAGMIB.1.3.6.1.4.1.6486.801.1.2.1.13.1
123
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
123 total| Object Name |
|---|
alcatelIND1LAGMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
The Link Aggregation module for managing ALCATEL FALCON product
This MIB is an image of the 802.3ad standard.
The aim of this proprietary MIB is to allow the creation of
aggregate objects with their size.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.13.1 |
alcatelIND1LAGMIBNotificationsBranch For LAG MIB Subsystem Notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.13.1.0 |
lnkaggAggUpThe Link Aggregation is active .
This trap is sent when any one port of the link aggregation
goes to attached state. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.13.1.0.1 |
lnkaggAggDownThe Link Aggregation is not active .
This trap is sent when all ports of the link aggregation
goes out of attached state. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.13.1.0.2 |
lnkaggPortJoinThe Link Aggregation port joins the aggregate .
This trap is sent when given port of the link aggregation
goes to attached state. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.13.1.0.3 |
lnkaggPortLeaveThe Link Aggregation port leaves the aggregate .
This trap is sent when given port of the link aggregation
goes out of attached state. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.13.1.0.4 |
lnkaggPortRemoveThe Link Aggregation port removed from the aggregate .
This trap is sent when given port of the link aggregation
removed due to invalid configuration . NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.13.1.0.5 |
alcatelIND1LAGMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.13.1.1 |
alclnkaggAgg OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1 |
alclnkaggAggTableA table that contains information about every
Aggregator that is associated with this System.
To create specify alclnkaggAggIndex,alclnkaggAggSize
and alclnkaggAggLacpType. SEQUENCE OF AlclnkaggAggEntry .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1 |
alclnkaggAggEntryA list of the Aggregator parameters. This is indexed
by the ifIndex of the Aggregator. AlclnkaggAggEntry .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1 |
alclnkaggAggIndexThe unique identifier allocated to this Aggregator by the local
System.
This attribute identifies an Aggregator instance among the subordinate
managed objects of the containing object. This value is read-only. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.1 |
alclnkaggAggMACAddressA 6-octet read-only value carrying the individual
MAC address assigned to the Aggregator.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.2 |
alclnkaggAggActorSystemPriorityA 2-octet read-write value indicating the priority value
associated with the Actor's System ID.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.3 |
alclnkaggAggActorSystemIDA 6-octet read-write MAC address value used as a unique
identifier for the System that contains this Aggregator.
NOTE-From the perspective of the Link Aggregation mechanisms
described in Clause , only a single combination of
Actor's System ID and System Priority are considered, and no
distinction is made between the values of these parameters
for an Aggregator and the port(s) that are associated with
it; i.e., the protocol is described in terms of the operation
of aggregation within a single System. However, the managed.
objects provided for the Aggregator and the port both allow
management of these parameters. The result of this is to
permit a single piece of equipment to be configured by
management to contain more than one System from the point of
view of the operation of Link Aggregation. This may be of
particular use in the configuration of equipment that has
limited aggregation capability (see ).rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.4 |
alclnkaggAggPartnerAdminKeyThe current Administrative value of the Key accepted for the
Aggregator's current protocol Partner. Optional this is
a 16-bit read-write value. If the aggregation is manually
configured, this Key value will be a value assigned by the
local System. The administrative Key value may differ from
the operationalrw LacpKey (IEEE8023-LAG-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.5 |
alclnkaggAggActorAdminKeyThe current administrative value of the Key for the Aggregator.
The administrative Key value may differ from the operational
Key value for the reasons discussed in . This is a 16-bit,
read-write value. The meaning of particular Key values
is of local significance.rw LacpKey (IEEE8023-LAG-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.6 |
alclnkaggAggActorOperKeyThe current operational value of the Key for the Aggregator.
The administrative Key value may differ from the operational
Key value for the reasons discussed in .
This is a 16-bit read-only value. The meaning of particular Key
values is of local significance.ro LacpKey (IEEE8023-LAG-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.7 |
alclnkaggAggPartnerSystemIDA 6-octet read-write MAC address value consisting
of the unique identifier for the current protocol Partner of
this Aggregator. A value of zero indicates that there is no
known Partner. If the aggregation is manually configured, this
System ID value will be a value assigned by the local System.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.8 |
alclnkaggAggPartnerSystemPriorityA 2-octet read-only value that indicates the priority
value associated with the Partner's System ID. If the
aggregation is manually configured, this System Priority value
will be a value assigned by the local System.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.9 |
alclnkaggAggPartnerOperKeyThe current operational value of the Key for the
Aggregator's current protocol Partner. This is
a 16-bit read- write value. If the aggregation is manually
configured, this Key value will be a value assigned by the
local System.rw LacpKey (IEEE8023-LAG-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.10 |
alclnkaggAggSizeMaximum number of links that could be attached to this
aggregator, This nominator is mandatory and is a required
field in order to create a row in this tablerw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.11 |
alclnkaggAggNumberAggreagtor number reference the aggregate dedicated from the
ifindex at the creationro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.12 |
alclnkaggAggDescrDescription is a human readable string which describes of
the type of aggregator object OMNICHANNEL / LACP etcro SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.13 |
alclnkaggAggNameName of the aggregator is human readable string manually given by
the operatorrw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.14 |
alclnkaggAggLacpTypeAggreagtor set with LACP protocol or not (case of Omnichannel)
mandatory at the creation of the aggregator, cannot be modified
laterrw LacpType .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.15 |
alclnkaggAggAdminStatestatus assigned by the admnistrator. The activation of the aggregator
is managed by this nominatorrw AdminState SYNTAX INTEGER { enable(1), -- ready to pass packets disable(2) } .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.16 |
alclnkaggAggOperStateOperational status of the aggregator with proprietary values
operational state from iftable corresponds to UP statero Enumeration .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.17 |
alclnkaggAggNbrSelectedPortsThe number of ports selected at the momemt .ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.18 |
alclnkaggAggNbrAttachedPortsThe number of ports attached at the momemt .ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.19 |
alclnkaggAggPrimaryPortIndexthe ifindex of the primary port in the aggregator used to send
BPDUs and flooding frames Zeo indicates no primary port is
available .ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.20 |
alclnkaggAggPrimaryPortPositionthe port index number in the aggregator used to send
BPDUs and flooding frames .ro Integer32 (-1..15) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.21 |
alclnkaggAggRowStatusThis object is the RowStatus (locking flag) for creating or
deleting aggregator objects. alclnkaggAggSize, alclnkaggAggLacpType
and must be supplied in the request to create a row, it is a
required field.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.22 |
alclnkaggAggMcLagTypeAggregator set with MultiChassis mode or not
mandatory at the creation of the aggregator, cannot be modified
laterrw McLagType .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.23 |
alclnkaggAggPortSelectionHashPort Selection Criteria used to hash one port of the aggregate
for a given traffic flowrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.24 |
alclnkaggAggWTRTimerThis sets the WTR timer value in minutes for an aggregate. The default value is 0 minute.
The Default means the WTR is Disabled.
When an link comes up,
If there is no WTR enabled for this linkagg, bring up the link.
If there is a WTR configured for this linkagg,
1.if there are no other links attached to the same linkagg, bypass the WTR and bring up the link immediately.
2. If there are links attached to the same linkagg, start the WTR when the WTR expires,bring up the link.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.1.1.25 |
alclnkaggAggPortListTableA table that contains a list of all the ports
associated with each Aggregator. SEQUENCE OF AlclnkaggAggPortListEntry .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.2 |
alclnkaggAggPortListEntryA list of the ports associated with a given Aggregator.
This is indexed by the ifIndex of the Aggregator. AlclnkaggAggPortListEntry .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.2.1 |
alclnkaggAggPortListPortsThe complete set of ports currently associated with
this Aggregator. Each bit set in this list represents
an Actor Port member of this Link Aggregation.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.2.1.1 |
alclnkaggAggIdIfIndexTableEach row in this table represents the link aggregation
aggregate id's corresponding ifIndex. SEQUENCE OF AlclnkaggAggIdIfIndexEntry .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.3 |
alclnkaggAggIdIfIndexEntryParameters for link aggregation aggregate id relationship to ifIndex. AlclnkaggAggIdIfIndexEntry .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.3.1 |
alclnkaggIfIndexIfIndex for the given Aggregate ID Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.3.1.1 |
alclnkaggAggIdThe aggregate id number.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.1.3.1.2 |
alclnkaggAggPort OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2 |
alclnkaggAggPortTableA table that contains Link Aggregation Control
configuration information about every
Aggregation Port associated with this device.
A row appears in this table for each physical port. SEQUENCE OF AlclnkaggAggPortEntry .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1 |
alclnkaggAggPortEntryA list of Link Aggregation Control configuration
parameters for each Aggregation Port on this device. AlclnkaggAggPortEntry .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1 |
alclnkaggAggPortIndexThe ifIndex of the port InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.1 |
alclnkaggAggPortActorSystemPriorityA 2-octet read-write value used to define the priority
value associated with the Actor's System ID.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.2 |
alclnkaggAggPortActorSystemIDA 6-octet read-only MAC address value that defines
the value of the System ID for the System that contains this
Aggregation Port.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.3 |
alclnkaggAggPortActorAdminKeyThe current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local significance.rw LacpKey (IEEE8023-LAG-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.4 |
alclnkaggAggPortActorOperKeyThe current operational value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local significance.ro LacpKey (IEEE8023-LAG-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.5 |
alclnkaggAggPortPartnerAdminSystemPriorityA 2-octet read-write value used to define the administrative
value of priority associated with the Partner's System ID. The
assigned value is used, along with the value of
aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey,
aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority,
in order to achieve manually configured aggregation.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.6 |
alclnkaggAggPortPartnerOperSystemPriorityA 2-octet read-only value indicating the operational value
of priority associated with the Partner's System ID. The
value of this attribute may contain the manually configured value
carried in aAggPortPartnerAdminSystemPriority
if there is no protocol Partner.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.7 |
alclnkaggAggPortPartnerAdminSystemIDA 6-octet read-write MACAddress value representing
the administrative value of the Aggregation Port's protocol
Partner's System ID. The assigned value is used, along with
the value of aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminKey, aAggPortPartnerAdminPort,
and aAggPortPartnerAdminPortPriority, in order to
achieve manually configured aggregation.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.8 |
alclnkaggAggPortPartnerOperSystemIDA 6-octet read-only MACAddress value representing
the current value of the Aggregation Port's protocol Partner's
System ID. A value of zero indicates that there is no known
protocol Partner. The value of this attribute may contain the
manually configured value carried in
aAggPortPartnerAdminSystemID if there is no protocol Partner.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.9 |
alclnkaggAggPortPartnerAdminKeyThe current administrative value of the Key for the
protocol Partner. This is a 16-bit read-write value.
The assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID,
aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority,
in order to achieve manually configured aggregation.rw LacpKey (IEEE8023-LAG-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.10 |
alclnkaggAggPortPartnerOperKeyThe current operational value of the Key for the
protocol Partner. The value of this attribute may contain
the manually configured value carried in
aAggPortPartnerAdminKey if there is no protocol Partner.
This is a 16-bit read-only value.ro LacpKey (IEEE8023-LAG-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.11 |
alclnkaggAggPortSelectedAggIDThe identifier value of the Aggregator that this Aggregation
Port has currently selected. Zero indicates that the Aggregation
Port has not selected an Aggregator, either because it is in the
process of detaching from an Aggregator or because there is no
suitable Aggregator available for it to select. This value is
read-only.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.12 |
alclnkaggAggPortAttachedAggIDThe identifier value of the Aggregator that this Aggregation
Port is currently attached to. Zero indicates that the Aggregation
Port is not currently attached to an Aggregator. This value is
read-only.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.13 |
alclnkaggAggPortActorPortThe port number locally assigned to the Aggregation Port.
The port number is communicated in LACPDUs as the
Actor_Port. This value is read-only.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.14 |
alclnkaggAggPortActorPortPriorityThe priority value assigned to this Aggregation Port.
This 16-bit value is read-write.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.15 |
alclnkaggAggPortPartnerAdminPortThe current administrative value of the port number
for the protocol Partner. This is a 16-bit read-write value.
The assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey,
and aAggPortPartnerAdminPortPriority,
in order to achieve manually configured aggregation.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.16 |
alclnkaggAggPortPartnerOperPortThe operational port number assigned to this Aggregation
Port by the Aggregation Port's protocol Partner. The value
of this attribute may contain the manually configured value
carried in aAggPortPartnerAdminPort if there is no protocol
Partner. This 16-bit value is read-only.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.17 |
alclnkaggAggPortPartnerAdminPortPriorityThe current administrative value of the port priority
for the protocol Partner. This is a 16-bit read-write value.
The assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID,
aAggPortPartnerAdminKey, and aAggPortPartnerAdminPort,
in order to achieve manually configured aggregation.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.18 |
alclnkaggAggPortPartnerOperPortPriorityThe priority value assigned to this Aggregation Port
by the Partner. The value of this attribute may contain the
manually configured value carried in
aAggPortPartnerAdminPortPriority if there is no
protocol Partner. This 16-bit value is read-only.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.19 |
alclnkaggAggPortActorAdminStateA string of 8 bits, corresponding to the administrative values
of Actor_State () as transmitted by the Actor in LACPDUs.
The first bit corresponds to bit 0 of Actor_State (LACP_Activity),
the second bit corresponds to bit 1 (LACP_Timeout), the third bit
corresponds to bit 2 (Aggregation), the fourth bit corresponds to
bit 3 (Synchronization), the fifth bit corresponds to bit 4
(Collecting), the sixth bit corresponds to bit 5 (Distributing),
the seventh bit corresponds to bit 6 (Defaulted), and the eighth
bit corresponds to bit 7 (Expired). These values allow
administrative control over the values of LACP_Activity,
LACP_Timeout and Aggregation. This attribute value is read-write.rw LacpState (IEEE8023-LAG-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.20 |
alclnkaggAggPortActorOperStateA string of 8 bits, corresponding to the current
operational values of Actor_State as transmitted by the
Actor in LACPDUs. The bit allocations are as defined in
. This attribute value is read-only.ro LacpState (IEEE8023-LAG-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.21 |
alclnkaggAggPortPartnerAdminStateA string of 8 bits, corresponding to the current administrative
value of Actor_State for the protocol Partner. The bit
allocations are as defined in . This attribute value is
read-write. The assigned value is used in order to achieve
manually configured aggregation.rw LacpState (IEEE8023-LAG-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.22 |
alclnkaggAggPortPartnerOperStateA string of 8 bits, corresponding to the current values of
Actor_State in the most recently received LACPDU transmitted
by the protocol Partner. The bit allocations are as defined in
. In the absence of an active protocol Partner, this
value may reflect the manually configured value
aAggPortPartnerAdminState. This attribute value is read-only.ro LacpState (IEEE8023-LAG-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.23 |
alclnkaggAggPortSelectedAggNumberAggreagtor number to attach a port at its creation
mandatory and only used for the
Omnichhannel not allowed for LACP
(-1) value displayed when it is not significantrw Integer32(-1..127) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.24 |
alclnkaggAggPortGlobalPortNumberPhysical reference of the portro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.25 |
alclnkaggAggPortAdminStatestatus assigned by the admnistrator. port activation done by iftable
this nominator is equivalent to ifAdminStatus in ifTablero Enumeration .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.26 |
alclnkaggAggPortOperStateOperational status of the port regarding the trafficro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.27 |
alclnkaggAggPortStateaggregation status of the portro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.28 |
alclnkaggAggPortLinkStateOperational status of the linkro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.29 |
alclnkaggAggPortPrimaryport primary or notro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.30 |
alclnkaggAggPortLacpTypePort set with LACP protocol or not (case of Omnichannel)
mandatory at the creation of the portrw LacpType .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.31 |
alclnkaggAggPortRowStatusThis object is the RowStatus (locking flag) for creating or
deleting aggregatable port objects. alclnkaggAggPortActorAdminKey
and alclnkaggAggPortSlotSlice must be supplied
in the request to create a row, it is a required field.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.32 |
alclnkaggAggPortMcLagTypePort set with McLag mode or notro McLagType .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.1.1.33 |
alclnkaggAggPortStatsTableA table that contains Link Aggregation information
about every port that is associated with this device.
A row appears in this table for each physical port. SEQUENCE OF AlclnkaggAggPortStatsEntry .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2 |
alclnkaggAggPortStatsEntryA list of Link Aggregation Control Protocol statistics
for each port on this device. AlclnkaggAggPortStatsEntry .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1 |
alclnkaggAggPortStatsLACPDUsRxThe number of valid LACPDUs received on this
Aggregation Port. This value is read-only.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.1 |
alclnkaggAggPortStatsMarkerPDUsRxThe number of valid Marker PDUs received on this
Aggregation Port. This value is read-only.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.2 |
alclnkaggAggPortStatsMarkerResponsePDUsRxThe number of valid Marker Response PDUs received on this
Aggregation Port. This value is read-only.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.3 |
alclnkaggAggPortStatsUnknownRxThe number of frames received that either:
- carry the Slow Protocols Ethernet Type value (),
but contain an unknown PDU, or:
- are addressed to the Slow Protocols group MAC
Address (), but do not carry the Slow Protocols Ethernet Type.
This value is read-only.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.4 |
alclnkaggAggPortStatsIllegalRxThe number of frames received that carry the Slow
Protocols Ethernet Type value (), but contain a badly formed
PDU or an illegal value of Protocol Subtype ().
This value is read-only.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.5 |
alclnkaggAggPortStatsLACPDUsTxThe number of LACPDUs transmitted on this
Aggregation Port. This value is read-only.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.6 |
alclnkaggAggPortStatsMarkerPDUsTxThe number of Marker PDUs transmitted on this
Aggregation Port. This value is read-only.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.7 |
alclnkaggAggPortStatsMarkerResponsePDUsTxThe number of Marker Response PDUs transmitted
on this Aggregation Port. This value is read-only.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.2.1.8 |
alclnkaggAggPortDebugTableA table that contains Link Aggregation debug
information about every port that is associated with
this device. A row appears in this table for each
physical port. SEQUENCE OF AlclnkaggAggPortDebugEntry .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3 |
alclnkaggAggPortDebugEntryA list of the debug parameters for a port. AlclnkaggAggPortDebugEntry .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1 |
alclnkaggAggPortDebugRxStateThis attribute holds the value 'current' if the Receive
state machine for the Aggregation Port is in the
CURRENT state, 'expired' if the Receive state machine.
is in the EXPIRED state, 'defaulted' if the Receive state
machine is in the DEFAULTED state, 'initialize' if the
Receive state machine is in the INITIALIZE state,
'lacpDisabled' if the Receive state machine is in the
LACP_DISABLED state, or 'portDisabled' if the Receive
state machine is in the PORT_DISABLED state.
This value is read-only.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.1 |
alclnkaggAggPortDebugLastRxTimeThe value of aTimeSinceSystemReset (F.2.1) when
the last LACPDU was received by this Aggregation Port.
This value is read-only.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.2 |
alclnkaggAggPortDebugMuxStateThis attribute holds the value `detached' if the Mux
state machine (43.4.14) for the Aggregation Port is in
the DETACHED state, `waiting' if the Mux state machine
is in the WAITING state, `attached' if the Mux state
machine for the Aggregation Port is in the ATTACHED
state, `collecting' if the Mux state machine for the
Aggregation Port is in the COLLECTING state,
`distributing' if the Mux state machine for the
Aggregation Port is in the DISTRIBUTING state, and
`collectingDistributing' if the Mux state machine for
the Aggregation Port is in the COLLECTING_DISTRIBUTING
state. This value is read-only.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.3 |
alclnkaggAggPortDebugMuxReasonA human-readable text string indicating the reason
for the most recent change of Mux machine state.
This value is read-only.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.4 |
alclnkaggAggPortDebugActorChurnStateThe state of the Actor Churn Detection machine
() for the Aggregation Port. A value of 'noChurn'
indicates that the state machine is in either the
NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR
state, and 'churn' indicates that the state machine is in the
ACTOR_CHURN state. This value is read-only.ro ChurnState (IEEE8023-LAG-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.5 |
alclnkaggAggPortDebugPartnerChurnStateThe state of the Partner Churn Detection machine
() for the Aggregation Port. A value of 'noChurn'
indicates that the state machine is in either the
NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR
state, and 'churn' indicates that the state machine is
in the PARTNER_CHURN state.
This value is read-only.ro ChurnState (IEEE8023-LAG-MIB) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.6 |
alclnkaggAggPortDebugActorChurnCountCount of the number of times the Actor Churn state
machine has entered the ACTOR_CHURN state.
This value is read-only.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.7 |
alclnkaggAggPortDebugPartnerChurnCountCount of the number of times the Partner Churn
state machine has entered the PARTNER_CHURN state.
This value is read-only.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.8 |
alclnkaggAggPortDebugActorSyncTransitionCountCount of the number of times the Actor's Mux state
machine () has entered the IN_SYNC state.
This value is read-only.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.9 |
alclnkaggAggPortDebugPartnerSyncTransitionCountCount of the number of times the Partner's Mux
state machine () has entered the IN_SYNC state.
This value is read-only.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.10 |
alclnkaggAggPortDebugActorChangeCountCount of the number of times the Actor's perception of
the LAG ID for this Aggregation Port has changed.
This value is read-only.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.11 |
alclnkaggAggPortDebugPartnerChangeCountCount of the number of times the Partner's perception of
the LAG ID (see ) for this Aggregation Port has changed.
This value is read-only.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.2.3.1.12 |
alclnkaggTablesLastChangedThis object indicates the time of the
most recent change to the alclnkaggAggTable,
alclnkaggAggPortListTable, or
alclnkaggAggPortTable.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.3 |
lnkaggNotificationVars OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.4 |
traplnkaggAggIdIndex Value of Link Aggregation group .ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.4.1 |
traplnkaggPortIfIndexPort of Link Aggregate group .ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.4.2 |
alclnkaggAggConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5 |
alclnkAggLocalRangeOperMinMinimum value of aggregate currently used for
local aggregates. Used only when
multi-chassis aggregation enabled and chassis id is known.
Valid linkagg range is from 0 to 127. Value -1 indicated none.ro Integer32 ( -1 .. 127 ) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.1 |
alclnkAggLocalRangeOperMaxMaximum value of aggregate currently used for
local aggregates. Used only when
multi-chassis aggregation enabled and chassis id is known.
Valid linkagg range is from 0 to 127. Value -1 indicated none.ro Integer32 ( -1 .. 127 ) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.2 |
alclnkAggLocalRangeConfiguredMinMinimum value of aggregate configured to be used for
local aggregates. Used only when
multi-chassis aggregation enabled and chassis id is known.
Valid linkagg range is from 0 to 127. Value -1 indicated none.rw Integer32 ( -1 .. 127 ) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.3 |
alclnkAggLocalRangeConfiguredMaxMaximum value of aggregate configured to be used for
local aggregates. Used only when
multi-chassis aggregation enabled and chassis id is known.
Valid linkagg range is from 0 to 127. Value -1 indicated none.rw Integer32 ( -1 .. 127 ) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.4 |
alclnkAggPeerRangeOperMinMinimum value of aggregate currently used for
peer aggregates. Used only when
multi-chassis aggregation enabled and chassis id is known.
Valid linkagg range is from 0 to 127.
Value -1 indicated none or multi-chassis feature is not enabled.ro Integer32 ( -1 .. 127 ) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.5 |
alclnkAggPeerRangeOperMaxMaximum value of aggregate currently used for
peer aggregates. Used only when
multi-chassis aggregation enabled and chassis id is known.
Valid linkagg range is from 0 to 127.
Value -1 indicated none or multi-chassis feature is not enabled.ro Integer32 ( -1 .. 127 ) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.6 |
alclnkAggPeerRangeConfiguredMinMinimum value of aggregate configured to be used for
peer aggregates. Used only when
multi-chassis aggregation enabled and chassis id is known.
Valid linkagg range is from 0 to 127.
Value -1 indicated none or multi-chassis feature is not enabled.rw Integer32 ( -1 .. 127 ) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.7 |
alclnkAggPeerRangeConfiguredMaxMaximum value of aggregate configured to be used for
peer aggregates. Used only when
multi-chassis aggregation enabled and chassis id is known.
Valid linkagg range is from 0 to 127.
Value -1 indicated none or multi-chassis feature is not enabled.rw Integer32 ( -1 .. 127 ) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.8 |
alclnkAggMcLagRangeOperMinMinimum value of aggregate currently used for
Multi Chassis aggregates. Used only when
multi-chassis aggregation enabled and chassis id is known.
Valid linkagg range is from 0 to 127.
Value -1 indicated none or multi-chassis feature is not enabled.ro Integer32 ( -1 .. 127 ) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.9 |
alclnkAggMcLagRangeOperMaxMaximum value of aggregate currently used for
Multi Chassis aggregates. Used only when
multi-chassis aggregation enabled and chassis id is known.
Valid linkagg range is from 0 to 127.
Value -1 indicated none or multi-chassis feature is not enabled.ro Integer32 ( -1 .. 127 ) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.10 |
alclnkAggMcLagRangeConfiguredMinMinimum value of aggregate configured to be used for
Multi Chassis aggregates. Used only when
multi-chassis aggregation enabled and chassis id is known.
Valid linkagg range is from 0 to 127.
Value -1 indicated none or multi-chassis feature is not enabled.rw Integer32 ( -1 .. 127 ) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.11 |
alclnkAggMcLagRangeConfiguredMaxMaximum value of aggregate configured to be used for
Multi Chassis aggregates. Used only when
multi-chassis aggregation enabled and chassis id is known.
Valid linkagg range is from 0 to 127.
Value -1 indicated none or multi-chassis feature is not enabled.rw Integer32 ( -1 .. 127 ) .1.3.6.1.4.1.6486.801.1.2.1.13.1.1.5.12 |
alcatelIND1LAGMIBConformanceBranch For Link Aggregation Subsystem Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.13.1.2 |
alcatelIND1LAGMIBGroupsBranch For Link Aggregation Subsystem Units Of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.13.1.2.1 |
alcatelIND1LAGMIBCompliancesBranch For Link Aggregation Subsystem Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.13.1.2.2 |