ALCATEL-IND1-DCBX-MIB
AI MIB Summary
The ALCATEL-IND1-DCBX-MIB manages Data Center Bridging Exchange (DCBX) configuration parameters and capability limits on Alcatel-Lucent "Birds of Prey" switches, specifically controlling the enforcement of priority-based flow control (PFC), Enhanced Transmission Selection (ETS), and congestion avoidance settings via the System Capability Manager. This module enables centralized hardware feature limitation and optimization by exposing DCBX TLV attributes for system-wide performance tuning and resource allocation.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line System Capability Manager, to allow for system control and limitation setting, of different, features through out the system. Capability manager is a centralized process which provides hardware information and capability to other processes. To optimize the system performance , certain features may be configured to a lower than the hardware limit through capability manager.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2011 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1DcbxMIB.1.3.6.1.4.1.6486.801.1.2.1.72.1
69
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
69 total| Object Name |
|---|
alcatelIND1DcbxMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
System Capability Manager, to allow for system control and limitation setting, of
different, features through out the system.
Capability manager is a centralized process which provides hardware information and
capability to other processes. To optimize the system performance , certain features
may be configured to a lower than the hardware limit through capability manager.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2011 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.72.1 |
alcatelIND1DcbxMIBObjectsBranch For VFC-DCBX Subsystem Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.72.1.1 |
alaDcbxConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1 |
alaDcbxDCProfileTableA table of Data Center profiles. SEQUENCE OF AlaDcbxDCProfileEntry .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1 |
alaDcbxDCProfileEntryA DCB profile entry. AlaDcbxDCProfileEntry .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1 |
alaDcbxDCPIdIdentifier of DCB profile. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.1 |
alaDcbxDCPNameName of DCB profile.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.2 |
alaDcbxDCPETSTrafficClassesSupportedIndicates the number of traffic classes supported.ro LldpXdot1dcbxSupportedCapacity (LLDP-EXT-DOT1-V2-MIB) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.3 |
alaDcbxDCPPFCCapIndicates the number of traffic classes on the local device
that may simultaneously have PFC enabled.ro LldpXdot1dcbxSupportedCapacity (LLDP-EXT-DOT1-V2-MIB) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.4 |
alaDcbxDCPPriorityTCMapIndicates the priority TC map. All 8 priorities are assigned a TC.ro DcbxPriorityTCMap .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.5 |
alaDcbxDCPTemplateDCPIdIdentifier of Template DCB profile. Used when creating a new profile.
The template profile values will be copied to the new profile.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.6 |
alaDcbxDCPTemplateDCPNameName of Template DCB profile. Used when creating a new profile.
The template profile values will be copied to the new profile.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.7 |
alaDcbxDCPTCsPresentRepresents the traffic classes present in this particular profile.
Can be used to change the TC numbering. For example, a profile
with TCs numbered 0, 1, 2, can be changed to 1, 5, 7. The numbering
is assigned in increasing order. The number of TCs specified must
match the current number of TCs in the profile.rw DcbxTCsPresent .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.8 |
alaDcbxDCP8023xPauseReadyMakes a profile pause-ready. Can only be set during profile creation.
When enabled, the PFC is lossy for all traffic classes in the profile
and they cannot be changed to lossless. Applying this profile to a port
will allow the port to have 802.2x pause enabled through the interfaces
commands. Can be applied to ports with a standard VFC profile. Can
be applied to a DCB port only if pfc willing and pfc tlv bits are disabled.rw VfcEnableState (ALCATEL-IND1-VIRTUAL-FLOW-CONTROL-MIB) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.9 |
alaDcbxDCPRowStatusalaDcbxDCPRowStatus controls the creation and deletion of
rows in the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.10 |
alaDcbxDCPTrafficClassTableA table of Traffic Classes for the DCB Profiles. SEQUENCE OF AlaDcbxDCPTCEntry .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2 |
alaDcbxDCPTCEntryA DCB profile traffic class entry. AlaDcbxDCPTCEntry .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1 |
alaDcbxDCPTCDCPIdIdentifier of DCB profile. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.1 |
alaDcbxDCPTCTrafficClassIndicates the traffic class. LldpXdot1dcbxTrafficClassValue (LLDP-EXT-DOT1-V2-MIB) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.2 |
alaDcbxDCPTCDCPNameName of DCB profile.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.3 |
alaDcbxDCPTCMaximumBandwidthIndicates the max bandwidth assigned to this traffic class.rw LldpXdot1dcbxTrafficClassBandwidthValue (LLDP-EXT-DOT1-V2-MIB) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.4 |
alaDcbxDCPTCMinimumBandwidthIndicates the min bandwidth assigned to this traffic class.rw LldpXdot1dcbxTrafficClassBandwidthValue (LLDP-EXT-DOT1-V2-MIB) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.5 |
alaDcbxDCPTCPFCLinkDelayPFC link delay allowance.
Default for a lossy TC is 0 and cannot be any other value.
Default for a lossless TC is 52 and can be changed in a valid range (10-100).rw Unsigned32 (0 | 10..100) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.6 |
alaDcbxDCPTCPFCLinkDelayUserModifiedIndicates if the Link Delay value has been modified by the user.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.7 |
alaDcbxDCPTCPFCTrafficFlowIndicates if PFC traffic flow is enabled on this traffic classrw DcbxTrafficFlow .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.8 |
alaDcbxDCPTCPriorityMapA bitmap that indicates the priorities assigned to this traffic
class.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.9 |
alaDcbxDCPTCTrafficSchedulerIndicates the traffic class scheduler algorithm assigned to
this traffic class.ro LldpXdot1dcbxTrafficSelectionAlgorithm (LLDP-EXT-DOT1-V2-MIB) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.10 |
alaDcbxDCPTCRecommendedBandwidthIndicates the recommended min bandwidth assigned to this traffic class.rw LldpXdot1dcbxTrafficClassBandwidthValue (LLDP-EXT-DOT1-V2-MIB) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.11 |
alaDcbxDCPTCRecommendedTrafficSchedulerIndicates the recommended traffic class scheduler algorithm assigned to
this traffic class.ro LldpXdot1dcbxTrafficSelectionAlgorithm (LLDP-EXT-DOT1-V2-MIB) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.12 |
alaDcbxPortInstanceTableA table of DCP Port Instances. SEQUENCE OF AlaDcbxPortInstanceEntry .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3 |
alaDcbxPortInstanceEntryA DCP Port Instance Entry.
Creating this entry for a port will change the port mode
to DCB, set the default DCB profile (if none is specified),
will disable NDCB features, and will create a set of
alaDcbxPIPrioEntrys for the port. AlaDcbxPortInstanceEntry .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1 |
alaDcbxPIIfIndexIdentifier of DCB profile applied to this port. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.1 |
alaDcbxPIDCBXAdminDCBX Admin State. Enable or Disable all DCBX features on this port.rw VfcEnableState (ALCATEL-IND1-VIRTUAL-FLOW-CONTROL-MIB) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.2 |
alaDcbxPIDCBXOperDCBX Oper State. Enable or Disable all DCBX features on this port.ro VfcEnableState (ALCATEL-IND1-VIRTUAL-FLOW-CONTROL-MIB) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.3 |
alaDcbxPIAdminDCPIdIdentifier of DCB profile applied to this port.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.4 |
alaDcbxPIAdminDCPNameName of DCB profile applied to this port.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.5 |
alaDcbxPILocalModifiedValue is true if local configuration is different from configuration
imported from the DCB profile applied to this port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.6 |
alaDcbxPIPFCDefensePFC Defense Mode. Applies when PFC negotiation fails. If value is enabled,
then PFC becomes disabled but traffic still flows. If the value is disabled,
then PFC local configuration remains on the port.rw VfcEnableState (ALCATEL-IND1-VIRTUAL-FLOW-CONTROL-MIB) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.7 |
alaDcbxPIPFCStatsClearClear the PFC stats for this port.rw VfcEnableState (ALCATEL-IND1-VIRTUAL-FLOW-CONTROL-MIB) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.8 |
alaDcbxPIStatusIndicates port status.ro DcbxStatus .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.9 |
alaDcbxPIActionTakenIndicates the action taken as a result of the status.ro DcbxActionTaken .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.10 |
alaDcbxPIRowStatusControls the creation and deletion of
rows in the alaDcbxPortInstanceTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.11 |
alaDcbxPIDCBXVersionDCBX Version selected on this port.rw DcbxVersion .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.12 |
alaDcbxPIDCBXOperVersionDCBX Version operating on this port.ro DcbxVersion .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.13 |
alaDcbxPIDCBXRemoteOperVersionDCBX Remote Version operating on this port.ro RemoteDcbxVersion .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.14 |
alaDcbxPIPriorityTableA table of Priorities for DCP Port Instances. SEQUENCE OF AlaDcbxPIPrioEntry .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4 |
alaDcbxPIPrioEntryA DCB profile traffic class entry. AlaDcbxPIPrioEntry .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1 |
alaDcbxPIPrioIfIndexIdentifier of DCP Port Instance. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.1 |
alaDcbxPIPrioPriorityIndicates the priority of the DCP Port Instance. IEEE8021PriorityValue (IEEE8021-TC-MIB) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.2 |
alaDcbxPIPrioTCIndicates the traffic class this priority belongs to.ro LldpXdot1dcbxTrafficClassValue (LLDP-EXT-DOT1-V2-MIB) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.3 |
alaDcbxPIPrioPFCPacketsReceivedTotal PFC received packet count.ro Counter64 .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.4 |
alaDcbxPIPrioPFCPacketsTransmittedTotal PFC transmitted packet count.ro Counter64 .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.5 |
alaDcbxPfcLLPrioritiesUsedThis object specifies the number of PFC Lossless Priorities
in use in the system.rodeprecated Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.5 |
alaDcbxPfcLLPrioritiesReservedThis object specifies the number of PFC Lossless Priorities
in reserved in the system.rodeprecated Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.6 |
alaDcbxPfcLLPrioritiesAvailableThis object specifies the number of Priorities
available to be configured as PFC Lossless.rodeprecated Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.7 |
alaDcbxPfcUsageTableA table of chassis entries. Each depicts the pfc priorities available
per chassis. Only valid for TOR platform. In Virtual Chassis mode there is
an entry per chassis. In non-Virtual Chassis mode, only one entry is present. SEQUENCE OF AlaDcbxPfcUsageEntry .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8 |
alaDcbxPfcUsageEntryA PFC usage class entry. AlaDcbxPfcUsageEntry .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1 |
alaDcbxPfcUsageChassisIdChassis ID. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1.1 |
alaDcbxPfcUsagePrioritiesUsedThis object specifies the number of PFC Lossless Priorities
in use.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1.2 |
alaDcbxPfcUsagePrioritiesReservedThis object specifies the number of PFC Lossless Priorities
reserved.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1.3 |
alaDcbxPfcUsagePrioritiesAvailableThis object specifies the number of Priorities
available to be configured as PFC Lossless.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1.4 |
alaXdot1dcbxAdminApplicationPriorityAppTableTable containing entries indicating the status of the corresponding row in lldpXdot1dcbxAdminApplicationPriorityAppTable SEQUENCE OF AlaXdot1dcbxAdminApplicationPriorityAppEntry .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.9 |
alaXdot1dcbxAdminApplicationPriorityAppEntryEntry that indicates the rowstatus of application priority entry in lldpXdot1dcbxAdminApplicationPriorityAppTable AlaXdot1dcbxAdminApplicationPriorityAppEntry .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.9.1 |
alaXdot1dcbxAdminApplicationPriorityAEPriorityThe priority code point that should be used in
frames transporting the protocol indicated by
alaXdot1dcbxAdminApplicationPriorityAESelector and
alaXdot1dcbxAdminApplicationPriorityAEProtocolrw IEEE8021PriorityValue (IEEE8021-TC-MIB) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.9.1.1 |
alaXdot1dcbxAdminApplicationPriorityAppRowStatusThis object controls only the deletion of an entry in
lldpXdot1dcbxAdminApplicationPriorityAppTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.9.1.2 |
alaDcbxConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.72.1.1.2 |
alcatelIND1DcbxMIBConformanceBranch For VFC-DCBX Subsystem Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.72.1.2 |
alcatelIND1DcbxMIBGroupsBranch For VFC-DCBX Subsystem Units Of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1 |
alcatelIND1DcbxMIBCompliancesBranch For VFC-DCBX Subsystem Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.72.1.2.2 |