A3COM51-SS9000SX
AI MIB Summary
Standard SNMP MIB module defining data structures for A3COM51-SS9000SX.
29
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
a3Com OBJECT IDENTIFIER .1.3.6.1.4.1.43 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.43.1 |
hub OBJECT IDENTIFIER .1.3.6.1.4.1.43.1.8 |
superStackSwitch9000SX OBJECT IDENTIFIER .1.3.6.1.4.1.43.1.8.32 |
superStackSwitch3800 OBJECT IDENTIFIER .1.3.6.1.4.1.43.1.8.34 |
superStackSwitch9100 OBJECT IDENTIFIER .1.3.6.1.4.1.43.1.8.36 |
superStackSwitch9000SX-mib OBJECT IDENTIFIER .1.3.6.1.4.1.43.27 |
ss9000UnitPaceModeThis object specifies the type of backoff algorithm.
Any port can use the standard ethernet
algorithm or, for PACE applications, it can be set into low
latency mode. In this mode, the backoff algorithm is optimized
to minimize the possibility of collisions.
PACE mode can be set for the whole unit only.rw Enumeration .1.3.6.1.4.1.43.27.1 |
ss9000PortTableThe port management table. SEQUENCE OF Ss9000PortTableEntry .1.3.6.1.4.1.43.27.2 |
ss9000PortTableEntryThis table contains pairs of 32-bit counters which
map to RMON 2 64-bit counters Ss9000PortTableEntry .1.3.6.1.4.1.43.27.2.1 |
ss9000PortIndexThe index of this table entry.ro INTEGER .1.3.6.1.4.1.43.27.2.1.1 |
ss9000PortRxPktCtLowThe lower 32 bits of the 64 bit receive packet counter
for this portro Counter .1.3.6.1.4.1.43.27.2.1.2 |
ss9000PortRxPktCtHighThe upper 32 bits of the 64 bit receive packet counter
for this portro Counter .1.3.6.1.4.1.43.27.2.1.3 |
ss9000PortRxByteCtLowThe lower 32 bits of the 64 bit receive byte counter
for this portro Counter .1.3.6.1.4.1.43.27.2.1.4 |
ss9000PortRxByteCtHighThe upper 32 bits of the 64 bit receive byte counter
for this portro Counter .1.3.6.1.4.1.43.27.2.1.5 |
ss9000PortTxPktCtLowThe lower 32 bits of the 64 bit transmit packet counter
for this portro Counter .1.3.6.1.4.1.43.27.2.1.6 |
ss9000PortTxPktCtHighThe upper 32 bits of the 64 bit transmit packet counter
for this portro Counter .1.3.6.1.4.1.43.27.2.1.7 |
ss9000PortTxByteCtLowThe lower 32 bits of the 64 bit transmit byte counter
for this portro Counter .1.3.6.1.4.1.43.27.2.1.8 |
ss9000PortTxByteCtHighThe upper 32 bits of the 64 bit transmit byte counter
for this portro Counter .1.3.6.1.4.1.43.27.2.1.9 |
ss9000SaveConfigurationWhen this object is set, the device will copy the contents
of the configuration database to a buffer and save it to the
persistant store specified by the value of the object. The
save is performed asynchronously, and the snmp agent will continue
to respond to both gets and sets while the save is taking
place. A network management application may use the
ss9000SaveStatus object to determine when the asynchronous
save operation has completed.rw Enumeration .1.3.6.1.4.1.43.27.3 |
ss9000SaveStatusThis object will return the status of a save operation invoked
by setting the ss9000SaveConfiguration object. A network
management application can read this object to determine that a
save operation has completed.ro Enumeration .1.3.6.1.4.1.43.27.4 |
ss9000MauType OBJECT IDENTIFIER .1.3.6.1.4.1.43.27.5 |
ss9000MauType1000BaseSX OBJECT IDENTIFIER .1.3.6.1.4.1.43.27.5.1 |
extreme OBJECT IDENTIFIER .1.3.6.1.4.1.1916 |
RFC-1215 Unknown .1.3.6.1.4.1.1916 |
overheatA overheat trap indicates that the on board
tempature sensor has reported a overheat
condition. System will shutdown until unit has
suficiently cooled such that operation may begin
again. A cold start trap will be issued when
the unit has come back on line. TRAP-TYPE .1.3.6.1.4.1.1916.0.1 |
fanfailedA fan failed trap indicates one or more of the
cooling fans inside the device has failed. A
fanOK trap will be sent once the fan has attained
normal operation. TRAP-TYPE .1.3.6.1.4.1.1916.0.2 |
fanOKA fan has tansitioned out of a failure state and
is now operating correctly. TRAP-TYPE .1.3.6.1.4.1.1916.0.3 |
invalidLoginAttemptA user attempted to login to console or by telnet but was refused
access due to incorrect username or password TRAP-TYPE .1.3.6.1.4.1.1916.0.4 |
More MIBs from Extreme Networks
Browse all Extreme NetworksMIBs →EXTREME-WIRELESS-MIB
SNMP MIB module
836 objects→
EXTREME-BASE-MIB
The EXTREME-BASE-MIB module provides SNMP management interfaces for Extreme Networks wireless access points and controllers, specifically exposing tables for monitoring wireless client associations, access point operational states, and RF interface statistics.
243 objects→
EXTREME-SYSTEM-MIB
SNMP MIB module
182 objects→
EXTREME-ESRP-MIB
SNMP MIB module
127 objects→
EXTREME-PORT-MIB
SNMP MIB module
123 objects→
EXTREME-VLAN-MIB
The EXTREME-VLAN-MIB provides SNMP access to configure and monitor Virtual LAN (VLAN) parameters, including port assignments, VLAN membership states, and bridging statistics on Extreme Networks switching hardware. This module enables the tracking of VLAN operational status, MAC address table entries, and traffic counters essential for Layer 2 network segmentation and troubleshooting.
120 objects→