ZhoneDsl-MIB
The MIB module to describe the Zhone specific implementation of HDSL, HDSL2, SDSL and G.SHDSL
Main OID:
zhoneDsl_MIB.1.3.6.1.4.1.5504.6.3
56
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
56 total| Object Name |
|---|
zhoneDslLineTableThis table contains common attributes describing DSL physical line interfaces for DSLs without a MIB standard. SEQUENCE OF ZhoneDslLineEntry .1.3.6.1.4.1.5504.5.4.1 |
zhoneDslLineEntryAn entry in the zhoneDslLine Table. ZhoneDslLineEntry .1.3.6.1.4.1.5504.5.4.1.1 |
zhoneDslLineTypeThe DSL type. Many modem vendors allow software selection between HDSL, HDSL2, SDSL and SHDSL. Using zhoneDslLineTypeSupported the user can see what dsl option is available on this interface.rw Enumeration .1.3.6.1.4.1.5504.5.4.1.1.1 |
zhoneDslLineCapabilitiesThe DSL types supported on this interface. This is a bit-map of possible types. This variable can be used to determine zhoneDslLineType.ro Bits .1.3.6.1.4.1.5504.5.4.1.1.2 |
zhoneDslLineStatusThe DSL modem status. Detailed modem state maybe available in the status table.ro Enumeration .1.3.6.1.4.1.5504.5.4.1.1.3 |
zhoneDslUpLineRateThe DSL upstream (cpe->co) line rate on this interface.ro Gauge32 UNITS "bps" .1.3.6.1.4.1.5504.5.4.1.1.4 |
zhoneDslDownLineRateThe DSL downstream (co->cpe) line rate on this interface.ro Gauge32 UNITS "bps" .1.3.6.1.4.1.5504.5.4.1.1.5 |
zhoneDslLineConfigProfileThe value of this object identifies the row in the respective dsl configuration profile table. (Ex: if zhoneDslLineType is HDSL2, then the profile identifies an HDSL2 configuration profile.) It is assumed that all profile names are unique to the system. In the case which the configuration profile has not been set, the value will be set to `ZhoneDefault'. This is a profile (by type) which will be persisted and then able to be modified by a management station in order to modify the DEFAULT values.rw ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.5.4.1.1.6 |
zhoneDslLineAlarmProfileThe value of this object identifies the row in the respective dsl alarm profile table. (Ex: if zhoneDslLineType is HDSL2 then the profile identifies an HDSL2 alarm profile.) It is assumed that all profile names are unique to the system. In the case where the configuration profile has not been set, the value will be set to `ZhoneDefault'.rw ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.5.4.1.1.7 |
zhoneDslLineRowStatusRow status in order to add an entry in this table. The required fields to be added are: (ARE ALL THE DEFAULTS OKAY)rw ZhoneRowStatus (Zhone-TC) .1.3.6.1.4.1.5504.5.4.1.1.8 |
zhoneHdsl2ConfigProfileTableThis table contains information for HDSL2 configuration. SEQUENCE OF ZhoneHdsl2ConfigProfileEntry .1.3.6.1.4.1.5504.5.4.3 |
zhoneHdsl2ConfigProfileEntryAn entry in the zhoneHdsl2ConfigProfile Table. ZhoneHdsl2ConfigProfileEntry .1.3.6.1.4.1.5504.5.4.3.1 |
zhoneHdsl2ConfigProfileNameConfiguration profile name. Used by the zhoneHdsl2LineConfigProfile entry to map zhoneDslLine Entry to the appropriate profile. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will always provide a default profile whose name is `DEFVAL'. When `static' profiles are implemented, there is an one-to-one relationship between each line and its profile. In which case, the profile name will need to algorithmically represent the Line's ifIndex. Therefore, the profile's name is a decimal zed string of the ifIndex that is fixed-length (i.e., 10) with leading zero(s). For example, the profile name for ifIndex which equals '15' will be '0000000015'. ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.5.4.3.1.1 |
zhoneHdsl2ConfigUnitModeUnit is configured as the CO(central office)or CPE (customer premise)side.rw Enumeration .1.3.6.1.4.1.5504.5.4.3.1.2 |
zhoneHdsl2ConfigTransmitPowerbackoffModeDetermines if the transmit power backoff defined in HDSL2 standard is used.rw Enumeration .1.3.6.1.4.1.5504.5.4.3.1.3 |
zhoneHdsl2ConfigDecoderCoeffA21 bit value corresponding to the decoder coefficient A. The default is the ANSI HDSL2 default.rw Integer32 .1.3.6.1.4.1.5504.5.4.3.1.4 |
zhoneHdsl2ConfigDecoderCoeffB21 bit value corresponding to the decoder coefficient A. The default is the ANSI HDSL2 default.rw Integer32 .1.3.6.1.4.1.5504.5.4.3.1.5 |
zhoneHdsl2ConfigFrameSyncWord10 bit frame sync word. The default is the HDSL2 standard.rw Integer32 .1.3.6.1.4.1.5504.5.4.3.1.6 |
zhoneHdsl2ConfigStuffBits4 bit stuff pattern. The default is the HDSL2 standard.rw Integer32 .1.3.6.1.4.1.5504.5.4.3.1.7 |
zhoneHdsl2ConfigRowStatusStatus in order to create/delete rows. For creation the following fields are required:rw ZhoneRowStatus (Zhone-TC) .1.3.6.1.4.1.5504.5.4.3.1.8 |
zhoneHdsl2StatusTableThis table contains HDSL2 specific line status information. An entry into this table is automatically created whenever a zhoneDslLineEntry is created and the type is HDSL2. SEQUENCE OF ZhoneHdsl2StatusEntry .1.3.6.1.4.1.5504.5.4.4 |
zhoneHdsl2StatusEntryAn entry in the zhoneHdsl2Status Table. ZhoneHdsl2StatusEntry .1.3.6.1.4.1.5504.5.4.4.1 |
zhoneHdsl2DriftAlarmIndicates that the framer automatically attempted to adjust for clock drift. This is not applicable for ATM.ro Enumeration .1.3.6.1.4.1.5504.5.4.4.1.1 |
zhoneHdsl2FramerIBStatusReturns the segd,sega,uib and losd bits. The format of the octet is: x x x x segd sega uib losd.ro OCTET STRING .1.3.6.1.4.1.5504.5.4.4.1.2 |
zhoneHdsl2LocalPSDMaskStatusReturns a number corresponding to the transmit power backoff requested by the local unit.ro Integer32 .1.3.6.1.4.1.5504.5.4.4.1.3 |
zhoneHdsl2LoopAttenuationEstimation of the loop attenuation in tenths of a DB. by the local unit.ro Integer32 UNITS "tenth DB" .1.3.6.1.4.1.5504.5.4.4.1.4 |
zhoneHdsl2LossWordStatusThis indicates loss of sync.ro Enumeration .1.3.6.1.4.1.5504.5.4.4.1.5 |
zhoneHdsl2RmtPSDMaskStatusReturns a number corresponding to the transmit power backoff requested by the remote unit.ro Integer32 .1.3.6.1.4.1.5504.5.4.4.1.6 |
zhoneHdsl2RmtCountryCodeANSI HDSL2 Country code of the remote unit.ro Integer32 .1.3.6.1.4.1.5504.5.4.4.1.7 |
zhoneHdsl2RmtVersionHDSL2 version of the remote unit.ro Integer32 .1.3.6.1.4.1.5504.5.4.4.1.8 |
zhoneHdsl2RmtProviderCodeProvider word of the remote unit.ro Integer32 .1.3.6.1.4.1.5504.5.4.4.1.9 |
zhoneHdsl2RmtVendorDataThe remote unit's vendor-provided data.ro OCTET STRING .1.3.6.1.4.1.5504.5.4.4.1.10 |
zhoneHdsl2RmtTxEncoderAThe remote unit's 21 bit encoder coefficient Aro Integer32 .1.3.6.1.4.1.5504.5.4.4.1.11 |
zhoneHdsl2RmtTxEncoderBThe remote unit's 21 bit encoder coefficient Bro Integer32 .1.3.6.1.4.1.5504.5.4.4.1.12 |
zhoneHdsl2TipRingStatusIndicates whether the tip and ring points from the local unit match the tip and ring points of the remote.ro Enumeration .1.3.6.1.4.1.5504.5.4.4.1.13 |
zhoneHdsl2FrameSyncWordA 10 bit number indicating the frame sync word used. LSB justifiedro Integer32 .1.3.6.1.4.1.5504.5.4.4.1.14 |
zhoneHdsl2StuffBitsA 4 bit number for the stuff bits. LSB justified.ro Integer32 .1.3.6.1.4.1.5504.5.4.4.1.15 |
zhoneDslPerfDataTableThis table provides one row for each modem interface. SEQUENCE OF ZhoneDslPerfDataEntry .1.3.6.1.4.1.5504.5.4.5 |
zhoneDslPerfDataEntryAn entry in zhoneDslPerfDataTable. ZhoneDslPerfDataEntry .1.3.6.1.4.1.5504.5.4.5.1 |
zhoneDslPerfLofsCount of the number of Loss of Framing failures since agent reset.ro Counter32 .1.3.6.1.4.1.5504.5.4.5.1.1 |
zhoneDslPerfLossCount of the number of Loss of Signal failures since agent reset.ro Counter32 .1.3.6.1.4.1.5504.5.4.5.1.2 |
zhoneDslPerfLolsCount of the number of Loss of Link failures since agent reset.ro Counter32 .1.3.6.1.4.1.5504.5.4.5.1.3 |
zhoneDslPerfInitsCount of the line initialization attempts since agent reset. Includes both successful and failed attempts.ro Counter32 .1.3.6.1.4.1.5504.5.4.5.1.4 |
zhoneDslPerfCur15MinTimeElapsedThe number of seconds elapsed since the start of the current measurement period.ro Gauge32 UNITS "seconds" .1.3.6.1.4.1.5504.5.4.5.1.5 |
zhoneDslPerfCur15MinLofsCount of the number of Loss of Framing failures in the current 15 minute interval.ro Gauge32 UNITS "seconds" .1.3.6.1.4.1.5504.5.4.5.1.6 |
zhoneDslPerfCur15MinLossCount of seconds in the current 15 minute interval when there was a Loss of Signal.ro Gauge32 UNITS "seconds" .1.3.6.1.4.1.5504.5.4.5.1.7 |
zhoneDslPerfCur15MinLolsCount of seconds in the current 15 minute interval when there was of Loss of Link.ro Gauge32 UNITS "seconds" .1.3.6.1.4.1.5504.5.4.5.1.8 |
zhoneDslPerfCur15MinInitsCount of the line initialization attempts in the current 15 minute interval. Includes both successful and failed attempts.ro Counter32 .1.3.6.1.4.1.5504.5.4.5.1.9 |
zhoneDslAlarmProfileTableThis table contains information for Alarm conditions. One entry in this table reflects a profile defined by a manager which can be used to define alarm conditions for a modem. SEQUENCE OF ZhoneDslAlarmProfileEntry .1.3.6.1.4.1.5504.5.4.6 |
zhoneDslAlarmProfileEntryAn entry in the zhoneDslAlarmProfile Table. ZhoneDslAlarmProfileEntry .1.3.6.1.4.1.5504.5.4.6.1 |
zhoneDslAlarmProfileNameConfiguration profile name. Used by the zhoneDslLineConfigProfile entry to map zhoneDslLine Entry to the appropriate profile. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will always provide a default profile whose name is `DEFVAL'. When `static' profiles are implemented, there is an one-to-one relationship between each line and its profile. In which case, the profile name will need to algorithmically represent the Line's ifIndex. Therefore, the profile's name is a decimal zed string of the ifIndex that is fixed-length (i.e., 10) with leading zero(s). For example, the profile name for ifIndex which equals '15' will be '0000000015'. ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.5.4.6.1.1 |
zhoneDslThreshold15MinLossThe number of Loss of signal seconds on a DSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send a TRAP. 0 will disable the trap.rw INTEGER .1.3.6.1.4.1.5504.5.4.6.1.2 |
zhoneDslThreshold15MinLolsThe number of Loss of link seconds on a DSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send a TRAP. 0 will disable the trap.rw INTEGER .1.3.6.1.4.1.5504.5.4.6.1.3 |
zhoneDslThreshold15MinLofsThe number of Loss of framing seconds on a DSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send a TRAP. 0 will disable the trap.rw INTEGER .1.3.6.1.4.1.5504.5.4.6.1.4 |
zhoneDslAlarmProfileRowStatusRowStatus field to control deletion/addition of entries in this table. Minimal fields to be 'set' for a creation is:rw ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.5.4.6.1.5 |
zhoneDsl_MIBThe MIB module to describe the Zhone specific implementation of HDSL, HDSL2, SDSL and G.SHDSL MODULE-IDENTITY .1.3.6.1.4.1.5504.6.3 |