ZhoneAPON-MIB
AI MIB Summary
The ZhoneAPON-MIB provides management and monitoring capabilities for Zhone ATM-PON (Asynchronous Transfer Mode Passive Optical Network) access equipment, specifically tracking optical line terminal (OLT) and optical network unit (ONU) session states, physical layer parameters, and ATM traffic statistics.
This is the Zhone ATM-PON mib.
Main OID:
zhoneAponMIB.1.3.6.1.4.1.5504.5.12.1
107
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
107 total| Object Name |
|---|
zhoneAponATM Passive Optical Network-related Zhone MIBs. OBJECT IDENTIFIER .1.3.6.1.4.1.5504.5.12 |
zhoneAponMIBThis is the Zhone ATM-PON mib. MODULE-IDENTITY .1.3.6.1.4.1.5504.5.12.1 |
zhoneOltConfigTableOptical Line Termination configuration table. SEQUENCE OF ZhoneOltConfigEntry .1.3.6.1.4.1.5504.5.12.1.2 |
zhoneOltConfigEntryAn entry in the Olt Config table. ZhoneOltConfigEntry .1.3.6.1.4.1.5504.5.12.1.2.1 |
zhoneOltConfigAutoLearnAuto-learn enable flag.rw Enumeration .1.3.6.1.4.1.5504.5.12.1.2.1.1 |
zhoneOltConfigCellScramblingCell scrambling option control flag.rw Enumeration .1.3.6.1.4.1.5504.5.12.1.2.1.2 |
zhoneOltConfigBip8Bip8 - Bit Interleave Parity, a procedure whereby each bit of a resulting BIP8 parity byte is a parity bit done across a specific bit position.rw Enumeration .1.3.6.1.4.1.5504.5.12.1.2.1.3 |
zhoneOltConfigHecHeadder Error Control field.rw Enumeration .1.3.6.1.4.1.5504.5.12.1.2.1.4 |
zhoneOltConfigHecRxBypassCyclic Redundancy Check bypass for reception.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.2.1.5 |
zhoneOltConfigCrcRxCyclic Redundancy Check for reception.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.2.1.6 |
zhoneOltConfigOverheadSizeOverhead size definition field.rw Enumeration .1.3.6.1.4.1.5504.5.12.1.2.1.7 |
zhoneOltConfigDelimiterPatternA unique pattern indicating the start of the ATM cell or minislot, which can be used to perform byte synchronization.rw Integer32 .1.3.6.1.4.1.5504.5.12.1.2.1.8 |
zhoneOltConfigDelimiterSizeDelimiter pattern size.rw Integer32 .1.3.6.1.4.1.5504.5.12.1.2.1.9 |
zhoneOltConfigCdrPatternRe-sync signal pattern.rw Integer32 .1.3.6.1.4.1.5504.5.12.1.2.1.10 |
zhoneOltConfigCdrLocationRe-sync signal location.rw Integer32 .1.3.6.1.4.1.5504.5.12.1.2.1.11 |
zhoneOltConfigCdrActiveHighClock Data Recovery.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.2.1.12 |
zhoneOltConfigCpeLimitCell phase error limit.rw Integer32 .1.3.6.1.4.1.5504.5.12.1.2.1.13 |
zhoneOltConfigLcdLimitLoss of cell delineation limit.rw Integer32 .1.3.6.1.4.1.5504.5.12.1.2.1.14 |
zhoneOltConfigLcdAlphaNumber of cells in delineation error before the LCD alarm is raised.rw Integer32 .1.3.6.1.4.1.5504.5.12.1.2.1.15 |
zhoneOltConfigLcdDeltaNumber of cells received NOT in delineation error required to clear LCD Alarm.rw Integer32 .1.3.6.1.4.1.5504.5.12.1.2.1.16 |
zhoneOltConfigTxDiscardNonMatchingVpiDiscard non-matching Vpi.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.2.1.17 |
zhoneOltConfigUtopiaDiscardDiscard Utopia cells with HEC errors or arriving on unknown Vpi.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.2.1.18 |
zhoneOltConfigSyncBytesClkDivisorSync Bytes Clock Divisor.rw Integer32 .1.3.6.1.4.1.5504.5.12.1.2.1.19 |
zhoneOltConfigTxSyncBytesEnable transmission of sync bytes for ONUs to get their clock from a network source.rw Enumeration .1.3.6.1.4.1.5504.5.12.1.2.1.20 |
zhoneOltConfigLoopbackOLT loopback configuration.rw Enumeration .1.3.6.1.4.1.5504.5.12.1.2.1.21 |
zhoneOltConfigMaxPonDistanceMax PON distance.rw Integer32 .1.3.6.1.4.1.5504.5.12.1.2.1.22 |
zhoneOltConfigLineStatusChangeTrapEnableEnable/disable control for line status traps on this interface.rw Enumeration .1.3.6.1.4.1.5504.5.12.1.2.1.23 |
zhoneOltStatusTableOptical Line Termination status table. SEQUENCE OF ZhoneOltStatusEntry .1.3.6.1.4.1.5504.5.12.1.3 |
zhoneOltStatusEntryAn entry in the OLT Status table. ZhoneOltStatusEntry .1.3.6.1.4.1.5504.5.12.1.3.1 |
zhoneOltStatusStateLine state of the OLT.ro Enumeration .1.3.6.1.4.1.5504.5.12.1.3.1.1 |
zhoneOltStatusLoopbackLoopback state of the OLT.ro Enumeration .1.3.6.1.4.1.5504.5.12.1.3.1.2 |
zhoneOltStatusPonAlarmLPHYLoss of physical layer alarm.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.3.1.3 |
zhoneOltStatusPonAlarmTFTransmitter failure notification.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.3.1.4 |
zhoneOltStatusPonAlarmSUFStartUp Failure - ranging process failed N times. Note that SUF reflects a hardware problem, and does not include cases where the ONU serial number/password are wrong/unknown.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.3.1.5 |
zhoneOltStatusPonAlarmPEEPhysical Equipment Error (received from an ONU.)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.3.1.6 |
zhoneOltStatusPonAlarmLCDLoss of Cell Delineation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.3.1.7 |
zhoneOltStatusPonAlarmLOSLoss of Signal alarm.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.3.1.8 |
zhoneOltStatusPonAlarmOAMLPLOAM cell loss.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.3.1.9 |
zhoneOltStatusPonAlarmCPECell Phase Error.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.3.1.10 |
zhoneOltStatusLastChangeTime of last line status change.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.3.1.11 |
zhoneOltOnuConfigTableOptical Network Unit configuration table - MALC side. SEQUENCE OF ZhoneOltOnuConfigEntry .1.3.6.1.4.1.5504.5.12.1.4 |
zhoneOltOnuConfigEntryAn entry in the ONU Config table. ZhoneOltOnuConfigEntry .1.3.6.1.4.1.5504.5.12.1.4.1 |
zhoneOltOnuConfigPasswordONU remote-device password.rw ZhoneAdminString .1.3.6.1.4.1.5504.5.12.1.4.1.1 |
zhoneOltOnuConfigSerialNumONU remote-device serial number.rw Integer32 .1.3.6.1.4.1.5504.5.12.1.4.1.2 |
zhoneOltOnuConfigChurnkeyChurn key enable flag.rw Enumeration .1.3.6.1.4.1.5504.5.12.1.4.1.3 |
zhoneOltOnuConfigLineStatusChangeTrapEnableEnable/disable control for line status traps on this interface.rw Enumeration .1.3.6.1.4.1.5504.5.12.1.4.1.4 |
zhoneOltOnuStatusTableOptical Network Unit status table - MALC side. SEQUENCE OF ZhoneOltOnuStatusEntry .1.3.6.1.4.1.5504.5.12.1.5 |
zhoneOltOnuStatusEntryAn entry in the OLT/ONU Status table. ZhoneOltOnuStatusEntry .1.3.6.1.4.1.5504.5.12.1.5.1 |
zhoneOltOnuStatusPonAlarmLOALoss of ACK - ONU.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.5.1.1 |
zhoneOltOnuStatusPonAlarmERRBip8 error - ONU.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.5.1.2 |
zhoneOltOnuStatusPonAlarmSDSignal Degraded alarm.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.5.1.3 |
zhoneOltOnuStatusPonAlarmREIRemote Error Indication.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.5.1.4 |
zhoneOltOnuStatusPonAlarmMEMMessage Error Message.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.5.1.5 |
zhoneOltOnuStatusPonAlarmRXINHRx alarm inhibit.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.5.1.6 |
zhoneOltOnuStatusPonAlarmLOSDescription.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.5.1.7 |
zhoneOltOnuStatusPonAlarmPEEDescription.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.5.1.8 |
zhoneOltOnuStatusPonAlarmSUFDescription.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.5.1.9 |
zhoneOltOnuStatusPonAlarmOAMLDescription.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.5.1.10 |
zhoneOltOnuStatusPonAlarmLCDDescription.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.5.1.11 |
zhoneOnuConfigTableConfiguration information for the far-end (ONU) device. SEQUENCE OF ZhoneOnuConfigEntry .1.3.6.1.4.1.5504.5.12.1.6 |
zhoneOnuConfigEntryAn entry in the ONU Config table. ZhoneOnuConfigEntry .1.3.6.1.4.1.5504.5.12.1.6.1 |
zhoneOnuConfigSerialNumberONU serial number.ro Integer32 .1.3.6.1.4.1.5504.5.12.1.6.1.1 |
zhoneOnuConfigPasswordONU password.rw ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.5.12.1.6.1.2 |
zhoneOnuConfigNetworkRefClkNetwork reference clock usage flag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.6.1.3 |
zhoneOnuConfigHECHeader Error Control.rw Enumeration .1.3.6.1.4.1.5504.5.12.1.6.1.4 |
zhoneOnuConfigLoopbackLoopback mode for device.rw Enumeration .1.3.6.1.4.1.5504.5.12.1.6.1.5 |
zhoneOnuConfigOverheadSizeOverhead size definition field.rw Enumeration .1.3.6.1.4.1.5504.5.12.1.6.1.6 |
zhoneOnuConfigRfVideoUsed to turn rf video on and off and to read current status of rf video.rw Enumeration .1.3.6.1.4.1.5504.5.12.1.6.1.7 |
zhoneOnuStatusTableStatus and alarm information for the far-end (ONU) device. SEQUENCE OF ZhoneOnuStatusEntry .1.3.6.1.4.1.5504.5.12.1.7 |
zhoneOnuStatusEntryAn entry in the ONU Status table. ZhoneOnuStatusEntry .1.3.6.1.4.1.5504.5.12.1.7.1 |
zhoneOnuStatusOperStatusOperational status.ro Enumeration .1.3.6.1.4.1.5504.5.12.1.7.1.1 |
zhoneOnuStatusLoopbackLoopback status.ro Enumeration .1.3.6.1.4.1.5504.5.12.1.7.1.2 |
zhoneOnuStatusAlarmTFTransmitter Failure - The ONU transmitter is declared in failure when there is no nominal backfacet photocurrent or when the drive currents go beyond the maximum specification.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.7.1.3 |
zhoneOnuStatusAlarmLOSLoss Of Signal - No valid optical signal. E.g. this can be generated by the logical function (OAML.AND.FRML.AND.LCD).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.7.1.4 |
zhoneOnuStatusAlarmPEEPhysical Equipment Error - When the ONU receives a PEE message.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.7.1.5 |
zhoneOnuStatusAlarmSUFStartup Failure - The ranging of this ONU has failed (see ranging protocol for exact condition).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.7.1.6 |
zhoneOnuStatusAlarmOAMLPLOAM Cell Loss - When three consecutive PLOAM headers are wrong.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.7.1.7 |
zhoneOnuStatusAlarmLCDLoss of Cell Delineation - When seven consecutive ATM cells have an invalid HEC.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.7.1.8 |
zhoneOnuStatusAlarmFRMLLoss Of Downstream Frame - When the frame bit is 0 for three consecutive frames.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.7.1.9 |
zhoneOnuStatusAlarmERRBlock Error Detection - The downstream received BIP8 is compared with the calculated BIP8 on the received stream. The number of differing bits is accumulated in ERR. At regular intervals, the content is sent via REI to the OLT. This interval is programmed by the OLT with a BER_interval_timer message. ERR is renewed at every reception of a downstream PLOAM cell.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.7.1.10 |
zhoneOnuStatusAlarmSDSignal Degraded - Set active when the downstream BER >= 10E-5ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.7.1.11 |
zhoneOnuStatusAlarmMEMMessage Error Message - When the ONU receives an unknown message.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.7.1.12 |
zhoneOnuStatusAlarmDACTDe-activate PON-ID - It instructs the ONU to deactivate itself.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.7.1.13 |
zhoneOnuStatusAlarmDISDisabled ONU - When the ONU receives a Disable_serial_number message with it's own serial number and the enable flag=0xFF. It stays in this state even after power off.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.7.1.14 |
zhoneOnuStatusAlarmMISLink Mismatching - The ONU detects that the received PST and transmitted PST are different.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.7.1.15 |
zhoneOnuStatusLastChangeTime of last line status change.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.7.1.16 |
zhoneOltTrafficContainerIndexNextThis object contains an appropriate value to be used for the zhoneOltTrafficContainerIndex when creating entries in the zhoneOltTrafficContainerTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneOltTrafficContainerIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.ro Integer32 .1.3.6.1.4.1.5504.5.12.1.8 |
zhoneOltTrafficContainerTableTraffic Container definitions for the OLT. SEQUENCE OF ZhoneOltTrafficContainerEntry .1.3.6.1.4.1.5504.5.12.1.9 |
zhoneOltTrafficContainerEntryDescription. ZhoneOltTrafficContainerEntry .1.3.6.1.4.1.5504.5.12.1.9.1 |
zhoneOltTrafficContainerIndexA unique value to identify this traffic container entry. Integer32 .1.3.6.1.4.1.5504.5.12.1.9.1.1 |
zhoneOltTrafficContainerGuaranteedBWThe maximum guareented bandwidth is downstream bit rate divided by number of ONUs. For this incarnation, it is 622 / 32 = 19.4rw Unsigned32 .1.3.6.1.4.1.5504.5.12.1.9.1.2 |
zhoneOltTrafficContainerMaximumBWMaximum bandwidth for a PON channel. The maximum bandwidth is downstream bit rate divided by the number of ONUs. For this incarnation, it is 622 / 32 = 19.4rw Unsigned32 .1.3.6.1.4.1.5504.5.12.1.9.1.3 |
zhoneOltTrafficContainerCBRConstant Bit Rate - describes the nature of the traffic on the channel. A TRUE setting implies that the data stream will be of a constant nature. FALSE implies that the traffic will be bursty.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.9.1.4 |
zhoneOltTrafficContainerCbrCompensateA flag for ranging compensation. When a ranging window is opened, the Grant Handler appends to the end of the ranging window all the grants missed due to the ranging window by CBR flows with the compensation flag set.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.12.1.9.1.5 |
zhoneOltTrafficContainerRowStatusRow status of the traffic container entry. This field must be initially set to 'createAndGo'.rw ZhoneRowStatus (Zhone-TC) .1.3.6.1.4.1.5504.5.12.1.9.1.6 |
zhoneAponTrapsDefinitions for Atm PON traps. OBJECT IDENTIFIER .1.3.6.1.4.1.5504.5.12.3 |
zhoneAPONV2TrapsAPON Olt and Onu Traps. OBJECT IDENTIFIER .1.3.6.1.4.1.5504.5.12.3.0 |
zhoneOltLineStatusChangeTrapLine status change trap for the OLT APON interface. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.5.12.3.0.1 |
zhoneOnuLineStatusChangeTrapLine status change trap for a particular Onu APON interface. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.5.12.3.0.2 |
zhoneAponOltConfigGroupOLT Config objects. Unknown .1.3.6.1.4.1.5504.9.1.2 |
zhoneAponOltStatusGroupZhone ATM-PON OLT Status objects. Unknown .1.3.6.1.4.1.5504.9.1.3 |
zhoneAponOltOnuConfigGroupZhone ATM-PON ONU Config objects. Unknown .1.3.6.1.4.1.5504.9.1.4 |
zhoneAponOltOnuStatusGroupZhone ATM-PON ONU Status objects. Unknown .1.3.6.1.4.1.5504.9.1.5 |
zhoneAponOnuConfigGroupONU configuration information. Unknown .1.3.6.1.4.1.5504.9.1.6 |
zhoneAponOnuStatusGroupONU status and alarm information. Unknown .1.3.6.1.4.1.5504.9.1.7 |
zhoneAponOltTrafficContainerGroupOLT Traffic Container objects. Unknown .1.3.6.1.4.1.5504.9.1.8 |
zhoneAponTrapsGroupAtm PON traps group. Unknown .1.3.6.1.4.1.5504.9.1.9 |