ZYXEL-VDSLLINE-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
139
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
139 total| Object Name |
|---|
accessSwitchVdslLineMib OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.1.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.890.1.5.12.1.1 |
accessSwitchVdslLineMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.1.1.1 |
accessSwitchVdslLineTableThis table includes common attributes describing both ends of the line. SEQUENCE OF AccessSwitchVdslLineEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.1 |
accessSwitchVdslLineEntryAn entry in the accessSwitchVdslLineTable. AccessSwitchVdslLineEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.1.1 |
accessSwitchVdslLineCodingSpecifies the VDSL coding type used on this line.ro Enumeration .1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.1 |
accessSwitchVdslLineDiscCountCount of the number of disconnection failures since agent reset.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.2 |
accessSwitchVdslLineConfProfileThe value of this object identifies the row
in the VDSL Line Configuration Profile Table,
(accessSwitchVdslLineConfProfileTable), which applies for this
VDSL line.rw DisplayString .1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.3 |
accessSwitchVdslVtuoPhysTableThis table provides one row for each VTU-O.
Each row contains the physical layer parameters for that VTU-O. SEQUENCE OF AccessSwitchVdslVtuoPhysEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.2 |
accessSwitchVdslVtuoPhysEntryAn entry in the accessSwitchVdslVtuoPhysTable. AccessSwitchVdslVtuoPhysEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.2.1 |
accessSwitchVdslVtuoCurrSnrMgnNoise Margin as seen by this VTU with respect to its
received signal in 0.01dB.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.1 |
accessSwitchVdslVtuoCurrMseMinimum Square Error as seen by this VTU with respect to its
received signal in 0.01dB.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.2 |
accessSwitchVdslVtuoCurrPsdPower Spectral Density as seen by this VTU with respect to its
received signal in 0.01dBm/Hz.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.3 |
accessSwitchVdslVtuoCurrRsErrReed-Solomon error counted by this VTU with respect to its
received signal.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.4 |
accessSwitchVdslVtuoCurrAtnMeasured difference in the total power transmitted by
the peer VTU and the total power received by this VTU.ro Gauge .1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.5 |
accessSwitchVdslVtuoCurrOutputPwrMeasured total output power in 0.01dBm transmitted by this VTU.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.6 |
accessSwitchVdslVtuoCurrRateActual transmission rate in bits-per-second on this line.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.7 |
accessSwitchVdslVtuoCurrAttainableRateIndicates the maximum mandatoryly attainable data rate in bits-per-second
by the VTU. This value will be equal or greater than
the mandatory line rate.ro Gauge .1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.8 |
accessSwitchVdslVtuoCurrStatusIndicates mandatory state of the VTU-O line. This is a
bit-map of possible conditions. The various bit
positions are:
0 noDefect There no defects on the line
1 lossOfFraming VTU-O failure due to not
receiving valid frame.
2 lossOfSignal VTU-O failure due to not
receiving signal.
3 lossOfPower VTU-O failure due to loss of
power.
Note: the Agent may still
function.
4 lossOfSignalQuality Loss of Signal Quality is
declared when the Noise Margin
falls below the Minimum Noise
Margin, or the bit-error-rate
exceeds 10^-7.
5 lossOfLink VTU-O failure due to inability
to link with VTU-R.
6 dataInitFailure VTU-O failure during
initialization due to bit
errors corrupting startup
exchange data.
7 configInitFailure VTU-O failure during
initialization due to peer
VTU not able to support
requested configuration
8 protocolInitFailure VTU-O failure during
initialization due to
incompatible protocol used by
the peer VTU.
9 noPeerVtuPresent VTU-O failure during
initialization due to no
activation sequence detected
from peer VTU.
This is intended to supplement ifOperStatus.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.9 |
accessSwitchVdslVturPhysTableThis table provides one row for each VTU-R.
Each row contains the physical layer parameters for that VTU-R. SEQUENCE OF AccessSwitchVdslVturPhysEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.3 |
accessSwitchVdslVturPhysEntryAn entry in the accessSwitchVdslVturPhysTable. AccessSwitchVdslVturPhysEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.3.1 |
accessSwitchVdslVturCurrSnrMgnNoise Margin as seen by this VTU with respect to its
received signal in 0.01dB.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.1 |
accessSwitchVdslVturCurrMseMinimum Square Error as seen by this VTU with respect to its
received signal in 0.01dB.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.2 |
accessSwitchVdslVturCurrPsdPower Spectral Density as seen by this VTU with respect to its
received signal in 0.01dBm/Hz.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.3 |
accessSwitchVdslVturCurrRsErrReed-Solomon error counted by this VTU with respect to its
received signal.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.4 |
accessSwitchVdslVturCurrAtnMeasured difference in the total power transmitted by
the peer VTU and the total power received by this VTU.ro Gauge .1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.5 |
accessSwitchVdslVturCurrOutputPwrMeasured total output power in 0.01dBm transmitted by this VTU.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.6 |
accessSwitchVdslVturCurrRateActual transmission rate in bits-per-second on this line.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.7 |
accessSwitchVdslVturCurrAttainableRateIndicates the maximum mandatoryly attainable data rate in bits-per-second
by the VTU. This value will be equal or greater than
the mandatory line rate.ro Gauge .1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.8 |
accessSwitchVdslVturCurrStatusIndicates mandatory state of the VTU-R line. This is a
bit-map of possible conditions. The various bit
positions are:
0 noDefect There no defects on the line
1 lossOfFraming VTU-R failure due to not
receiving valid frame.
2 lossOfSignal VTU-R failure due to not
receiving signal.
3 lossOfPower VTU-R failure due to loss of
power.
Note: the Agent may still
function.
4 lossOfSignalQuality Loss of Signal Quality is
declared when the Noise Margin
falls below the Minimum Noise
Margin, or the bit-error-rate
exceeds 10^-7.
This is intended to supplement ifOperStatus.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.9 |
accessSwitchVdslVtuoInventoryTableThis table provides one row for each VTU-O.
Each row contains the inventory parameters for that VTU-O. SEQUENCE OF AccessSwitchVdslVtuoInventoryEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.4 |
accessSwitchVdslVtuoInventoryEntryAn entry in the accessSwitchVdslVtuoInventoryTable. AccessSwitchVdslVtuoInventoryEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.4.1 |
accessSwitchVdslVtuoInvSerialNumberThe vendor specific string that identifies the
vendor equipment.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.1.1.1.4.1.1 |
accessSwitchVdslVtuoInvVendorIDThe vendor ID code is a copy of the binary
vendor identification field defined by the
PHY[10] and expressed as readable characters.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.1.1.1.4.1.2 |
accessSwitchVdslVtuoInvVersionNumberThe vendor specific version number sent by this VTU
as part of the initialization messages. It is a copy
of the binary version number field defined by the
PHY[10] and expressed as readable characters.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.1.1.1.4.1.3 |
accessSwitchVdslVturInventoryTableThis table provides one row for each VTU-R.
Each row contains the inventory parameters for that VTU-R. SEQUENCE OF AccessSwitchVdslVturInventoryEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.5 |
accessSwitchVdslVturInventoryEntryAn entry in the accessSwitchVdslVturInventoryTable. AccessSwitchVdslVturInventoryEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.5.1 |
accessSwitchVdslVturInvSerialNumberThe vendor specific string that identifies the
vendor equipment.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.1.1.1.5.1.1 |
accessSwitchVdslVturInvVendorIDThe vendor ID code is a copy of the binary
vendor identification field defined by the
PHY[10] and expressed as readable characters.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.1.1.1.5.1.2 |
accessSwitchVdslVturInvVersionNumberThe vendor specific version number sent by this VTU
as part of the initialization messages. It is a copy
of the binary version number field defined by the
PHY[10] and expressed as readable characters.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.1.1.1.5.1.3 |
accessSwitchVdslVtuoPerfDataTableThis table provides one row for each VTU-O. SEQUENCE OF AccessSwitchVdslVtuoPerfDataEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.6 |
accessSwitchVdslVtuoPerfDataEntryAn entry in accessSwitchVdslVtuoPerfDataTable. AccessSwitchVdslVtuoPerfDataEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1 |
accessSwitchVdslVtuoPerfLofsCount of the number of Loss of Framing failures since
agent reset.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.1 |
accessSwitchVdslVtuoPerfLossCount of the number of Loss of Signal failures since
agent reset.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.2 |
accessSwitchVdslVtuoPerfLolsCount of the number of Loss of Link failures since
agent reset.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.3 |
accessSwitchVdslVtuoPerfLprsCount of the number of Loss of Power failures since
agent reset.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.4 |
accessSwitchVdslVtuoPerfESsCount of the number of Errored Seconds since agent
reset. The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.5 |
accessSwitchVdslVtuoPerfInitsCount of the line initialization attempts since
agent reset. Includes both successful and failed
attempts.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.6 |
accessSwitchVdslVtuoPerfValidIntervalsThe number of previous 15-minute intervals in the
interval table for which data was collected. Given
that <n> is the maximum # of intervals supported.
The value will be <n> unless the measurement was
(re-)started within the last (<n>*15) minutes, in which
case the value will be the number of complete 15
minute intervals for which the agent has at least
some data. In certain cases (e.g., in the case
where the agent is a proxy) it is possible that some
intervals are unavailable. In this case, this
interval is the maximum interval number for
which data is available.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.7 |
accessSwitchVdslVtuoPerfInvalidIntervalsThe number of intervals in the range from
0 to the value of accessSwitchVdslVtuoPerfValidIntervals
for which no data is available. This object
will typically be zero except in cases where
the data for some intervals are not available
(e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.8 |
accessSwitchVdslVtuoPerfCurr15MinTimeElapsedTotal elapsed seconds in this interval.ro Gauge .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.9 |
accessSwitchVdslVtuoPerfCurr15MinLofsCount of seconds in the mandatory 15 minute interval
when there was Loss of Framing.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.10 |
accessSwitchVdslVtuoPerfCurr15MinLossCount of seconds in the mandatory 15 minute interval
when there was Loss of Signal.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.11 |
accessSwitchVdslVtuoPerfCurr15MinLolsCount of seconds in the mandatory 15 minute interval
when there was Loss of Link.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.12 |
accessSwitchVdslVtuoPerfCurr15MinLprsCount of seconds in the mandatory 15 minute interval
when there was Loss of Power.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.13 |
accessSwitchVdslVtuoPerfCurr15MinESsCount of Errored Seconds in the mandatory 15 minute
interval. The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.14 |
accessSwitchVdslVtuoPerfCurr15MinInitsCount of the line initialization attempts in the
mandatory 15 minute interval. Includes both successful
and failed attempts.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.15 |
accessSwitchVdslVtuoPerfCurr1DayTimeElapsedNumber of seconds that have elapsed since the
beginning of the mandatory 1-day interval.ro Gauge .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.16 |
accessSwitchVdslVtuoPerfCurr1DayLofsCount of the number of seconds when there was Loss of
Framing during the mandatory day as measured by
accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.17 |
accessSwitchVdslVtuoPerfCurr1DayLossCount of the number of seconds when there was Loss of
Signal during the mandatory day as measured by
accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.18 |
accessSwitchVdslVtuoPerfCurr1DayLolsCount of the number of seconds when there was Loss of
Link during the mandatory day as measured by
accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.19 |
accessSwitchVdslVtuoPerfCurr1DayLprsCount of the number of seconds when there was Loss of
Power during the mandatory day as measured by
accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.20 |
accessSwitchVdslVtuoPerfCurr1DayESsCount of Errored Seconds during the mandatory day as
measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.
The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.21 |
accessSwitchVdslVtuoPerfCurr1DayInitsCount of the line initialization attempts in the
day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.
Includes both successful and failed attempts.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.22 |
accessSwitchVdslVtuoPerfPrev1DayMoniSecsThe amount of time in the previous 1-day interval
over which the performance monitoring information
is actually counted. This value will be the same as
the interval duration except in a situation where
performance monitoring data could not be collected
for any reason.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.23 |
accessSwitchVdslVtuoPerfPrev1DayLofsCount of seconds in the interval when there was
Loss of Framing within the most recent previous
1-day period.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.24 |
accessSwitchVdslVtuoPerfPrev1DayLossCount of seconds in the interval when there was
Loss of Signal within the most recent previous
1-day period.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.25 |
accessSwitchVdslVtuoPerfPrev1DayLolsCount of seconds in the interval when there was
Loss of Link within the most recent previous
1-day period.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.26 |
accessSwitchVdslVtuoPerfPrev1DayLprsCount of seconds in the interval when there was
Loss of Power within the most recent previous
1-day period.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.27 |
accessSwitchVdslVtuoPerfPrev1DayESsCount of Errored Seconds within the most recent
previous 1-day period. The errored second parameter is
a count of one-second intervals containing one or more
crc anomalies, or one or more los or sef defects.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.28 |
accessSwitchVdslVtuoPerfPrev1DayInitsCount of the line initialization attempts in the most
recent previous 1-day period. Includes both successful
and failed attempts.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.29 |
accessSwitchVdslVturPerfDataTableThis table provides one row for each VTU-R. SEQUENCE OF AccessSwitchVdslVturPerfDataEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.7 |
accessSwitchVdslVturPerfDataEntryAn entry in accessSwitchVdslVturPerfDataTable. AccessSwitchVdslVturPerfDataEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1 |
accessSwitchVdslVturPerfLofsCount of the number of Loss of Framing failures since
agent reset.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.1 |
accessSwitchVdslVturPerfLossCount of the number of Loss of Signal failures since
agent reset.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.2 |
accessSwitchVdslVturPerfLprsCount of the number of Loss of Power failures since
agent reset.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.3 |
accessSwitchVdslVturPerfESsCount of the number of Errored Seconds since agent
reset. The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.4 |
accessSwitchVdslVturPerfValidIntervalsThe number of previous 15-minute intervals in the
interval table for which data was collected. Given
that <n> is the maximum # of intervals supported.
The value will be <n> unless the measurement was
(re-)started within the last (<n>*15) minutes, in which
case the value will be the number of complete 15
minute intervals for which the agent has at least
some data. In certain cases (e.g., in the case
where the agent is a proxy) it is possible that some
intervals are unavailable. In this case, this
interval is the maximum interval number for
which data is available.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.5 |
accessSwitchVdslVturPerfInvalidIntervalsThe number of intervals in the range from
0 to the value of accessSwitchVdslVturPerfValidIntervals
for which no data is available. This object
will typically be zero except in cases where
the data for some intervals are not available
(e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.6 |
accessSwitchVdslVturPerfCurr15MinTimeElapsedTotal elapsed seconds in this interval.ro Gauge .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.7 |
accessSwitchVdslVturPerfCurr15MinLofsCount of seconds in the mandatory 15 minute interval
when there was Loss of Framing.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.8 |
accessSwitchVdslVturPerfCurr15MinLossCount of seconds in the mandatory 15 minute interval
when there was Loss of Signal.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.9 |
accessSwitchVdslVturPerfCurr15MinLprsCount of seconds in the mandatory 15 minute interval
when there was Loss of Power.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.10 |
accessSwitchVdslVturPerfCurr15MinESsCount of Errored Seconds in the mandatory 15 minute
interval. The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.11 |
accessSwitchVdslVturPerfCurr1DayTimeElapsedNumber of seconds that have elapsed since the
beginning of the mandatory 1-day interval.ro Gauge .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.12 |
accessSwitchVdslVturPerfCurr1DayLofsCount of the number of seconds when there was Loss of
Framing during the mandatory day as measured by
accessSwitchVdslVturPerfCurr1DayTimeElapsed.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.13 |
accessSwitchVdslVturPerfCurr1DayLossCount of the number of seconds when there was Loss of
Signal during the mandatory day as measured by
accessSwitchVdslVturPerfCurr1DayTimeElapsed.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.14 |
accessSwitchVdslVturPerfCurr1DayLprsCount of the number of seconds when there was Loss of
Power during the mandatory day as measured by
accessSwitchVdslVturPerfCurr1DayTimeElapsed.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.15 |
accessSwitchVdslVturPerfCurr1DayESsCount of Errored Seconds during the mandatory day as
measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed.
The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.16 |
accessSwitchVdslVturPerfPrev1DayMoniSecsThe amount of time in the previous 1-day interval
over which the performance monitoring information
is actually counted. This value will be the same as
the interval duration except in a situation where
performance monitoring data could not be collected
for any reason.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.17 |
accessSwitchVdslVturPerfPrev1DayLofsCount of seconds in the interval when there was
Loss of Framing within the most recent previous
1-day period.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.18 |
accessSwitchVdslVturPerfPrev1DayLossCount of seconds in the interval when there was
Loss of Signal within the most recent previous
1-day period.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.19 |
accessSwitchVdslVturPerfPrev1DayLprsCount of seconds in the interval when there was
Loss of Power within the most recent previous
1-day period.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.20 |
accessSwitchVdslVturPerfPrev1DayESsCount of Errored Seconds within the most recent
previous 1-day period. The errored second parameter is
a count of one-second intervals containing one or more
crc anomalies, or one or more los or sef defects.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.21 |
accessSwitchVdslVtuoIntervalTableThis table provides one row for each VTU-O
performance data collection interval. SEQUENCE OF AccessSwitchVdslVtuoIntervalEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.8 |
accessSwitchVdslVtuoIntervalEntryAn entry in the accessSwitchVdslVtuoIntervalTable. AccessSwitchVdslVtuoIntervalEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.8.1 |
accessSwitchVdslVtuoIntervalNumberPerformance Data Interval number 1 is the
the most recent previous interval; interval
96 is 24 hours ago. Intervals 2..96 are
optional. INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.1 |
accessSwitchVdslVtuoIntervalLofsCount of seconds in the interval when there was Loss
of Framing.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.2 |
accessSwitchVdslVtuoIntervalLossCount of seconds in the interval when there was Loss
of Signal.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.3 |
accessSwitchVdslVtuoIntervalLolsCount of seconds in the interval when there was Loss
of Link.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.4 |
accessSwitchVdslVtuoIntervalLprsCount of seconds in the interval when there was Loss
of Power.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.5 |
accessSwitchVdslVtuoIntervalESsCount of Errored Seconds in the interval.
The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.6 |
accessSwitchVdslVtuoIntervalInitsCount of the line initialization attempts
during the interval. Includes both successful
and failed attempts.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.7 |
accessSwitchVdslVtuoIntervalValidDataThis variable indicates if the data for this
interval is valid.ro Enumeration .1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.8 |
accessSwitchVdslVturIntervalTableThis table provides one row for each VTU-R
performance data collection interval. SEQUENCE OF AccessSwitchVdslVturIntervalEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.9 |
accessSwitchVdslVturIntervalEntryAn entry in the accessSwitchVdslVturIntervalTable. AccessSwitchVdslVturIntervalEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.9.1 |
accessSwitchVdslVturIntervalNumberPerformance Data Interval number 1 is the
the most recent previous interval; interval
96 is 24 hours ago. Intervals 2..96 are
optional. INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.1 |
accessSwitchVdslVturIntervalLofsCount of seconds in the interval when there was Loss
of Framing.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.2 |
accessSwitchVdslVturIntervalLossCount of seconds in the interval when there was Loss
of Signal.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.3 |
accessSwitchVdslVturIntervalLprsCount of seconds in the interval when there was Loss
of Power.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.4 |
accessSwitchVdslVturIntervalESsCount of Errored Seconds in the interval.
The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects.ro Counter .1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.5 |
accessSwitchVdslVturIntervalValidDataThis variable indicates if the data for this
interval is valid.ro Enumeration .1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.6 |
accessSwitchVdslLineConfProfileTableThis table contains information on the VDSL line
configuration. One entry in this table reflects a
profile which can be used to configure the VDSL line. SEQUENCE OF AccessSwitchVdslLineConfProfileEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.10 |
accessSwitchVdslLineConfProfileEntryEach entry consists of a list of parameters that
represents the configuration of an VDSL modem.
When `dynamic' profiles are implemented, a default
profile will always exist. This profile's name will
be set to `DEFVAL' and its parameters will be set
to vendor specific values, unless otherwise specified
in this document.
When `static' profiles are implemented, profiles
are automaticly created or destroyed as VDSL
physical lines are discovered and removed by
the system. The name of the profile will be
equivalent to the decimal value of the line's
interface index. AccessSwitchVdslLineConfProfileEntry .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1 |
accessSwitchVdslLineConfProfileNameThis object is used by the line configuration table
in order to identify a row of this table.
When `dynamic' profiles are implemented, the profile
name is user specified. Also, the system will always
provide a default profile whose name is `DEFVAL'.
When `static' profiles are implemented, there is an
one-to-one relationship between each line and its
profile. In which case, the profile name will
need to algorithmicly represent the Line's ifIndex.
Therefore, the profile's name is a decimalized string
of the ifIndex that is fixed-length (i.e., 10) with
leading zero(s). For example, the profile name for
ifIndex which equals '15' will be '0000000015'. DisplayString .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.1 |
accessSwitchVdslLineConfModeSpecifies the VDSL mode type used on this line.rw Enumeration .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.2 |
accessSwitchVdslVtuoConfRateTransmission rate in bits-per-second specified by this VTU.rw INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.3 |
accessSwitchVdslVtuoConfTargetSnrMgnConfigured Target Signal/Noise Margin in 0.01dB.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization.rw INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.4 |
accessSwitchVdslVtuoConfMaxSnrMgnConfigured Maximum acceptable Signal/Noise Margin in 0.01dB.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation.rw INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.5 |
accessSwitchVdslVtuoConfMinSnrMgnConfigured Minimum acceptable Signal/Noise Margin in 0.01dB.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not possible the modem will attempt to
re-initialize or shut down.rw INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.6 |
accessSwitchVdslVturConfRateTransmission rate in bits-per-second specified by this VTU.rw INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.7 |
accessSwitchVdslVturConfTargetSnrMgnConfigured Target Signal/Noise Margin in 0.01dB.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization.rw INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.8 |
accessSwitchVdslVturConfMaxSnrMgnConfigured Maximum acceptable Signal/Noise Margin in 0.01dB.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation.rw INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.9 |
accessSwitchVdslVturConfMinSnrMgnConfigured Minimum acceptable Signal/Noise Margin in 0.01dB.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not possible the modem will attempt to
re-initialize or shut down.rw INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.10 |
accessSwitchVdslLineConfProfileRowStatusThis object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to
`active'. When `active' is set, the system
will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated lines.
If the implementator of this MIB has chosen not
to implement `dynamic assignment' of profiles, this
object's MIN-ACCESS is read-only and its value
is always to be `active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.11 |
vesMaxNumOfProfilesThe maximum number of VDSL profiles which the system supports.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.1.11 |
accessSwitchVdslLCSMib OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.1.1.2 |
accessSwitchVdslLCSMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.1.1.2.1 |
accessSwitchVdslLCSQam OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.12.1.1.2.2 |
accessSwitchVdslVtuoQamTableThis table provides one row for each VTU-O if QAM is used.
Each row contains the modulation parameters for that VTU-O. SEQUENCE OF AccessSwitchVdslVtuoQamEntry .1.3.6.1.4.1.890.1.5.12.1.1.2.2.1 |
accessSwitchVdslVtuoQamEntryAn entry in the accessSwitchVdslVtuoQamTable. AccessSwitchVdslVtuoQamEntry .1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1 |
accessSwitchVdslVtuoQamConstellationModulation method used by this VTU.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1.1 |
accessSwitchVdslVtuoQamInterpolationModulation speed used by this VTU.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1.2 |
accessSwitchVdslVtuoQamFcCarrier frequency in Hz used by this ATU.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1.3 |
accessSwitchVdslVturQamTableThis table provides one row for each VTU-R if QAM is used.
Each row contains the modulation parameters for that VTU-R. SEQUENCE OF AccessSwitchVdslVturQamEntry .1.3.6.1.4.1.890.1.5.12.1.1.2.2.2 |
accessSwitchVdslVturQamEntryAn entry in the accessSwitchVdslVturQamTable. AccessSwitchVdslVturQamEntry .1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1 |
accessSwitchVdslVturQamConstellationModulation method used by this VTU.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1.1 |
accessSwitchVdslVturQamInterpolationModulation speed used by this VTU.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1.2 |
accessSwitchVdslVturQamFcCarrier frequency in Hz used by this ATU.ro INTEGER .1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1.3 |