ZYXEL-MES2110-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ZYXEL-MES2110-MIB.
46
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
46 total| Object Name |
|---|
zyxel OBJECT IDENTIFIER .1.3.6.1.4.1.890 |
RFC1213-MIB Unknown .1.3.6.1.4.1.890 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.890.1 |
accessSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5 |
esSeries OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8 |
mes2110_MIB OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.2110 |
mes2110_SystemInfo OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.2110.1 |
mes2110_SystemContactThe contact person of this system.rw DisplayString .1.3.6.1.4.1.890.1.5.8.2110.1.1 |
mes2110_SystemNameThe name of this system.rw DisplayString .1.3.6.1.4.1.890.1.5.8.2110.1.2 |
mes2110_SystemLocationThe location of this system.rw DisplayString .1.3.6.1.4.1.890.1.5.8.2110.1.3 |
mes2110_Mgt OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.2110.2 |
mes2110_MgtSnmpVerThis object specifies the SNMP version(s) supported by
the module.ro Enumeration .1.3.6.1.4.1.890.1.5.8.2110.2.1 |
mes2110_MgtModPNThis object specifies the managemnt module part
number.ro DisplayString .1.3.6.1.4.1.890.1.5.8.2110.2.2 |
mes2110_MgtModSNThis object specifies the managemnt module serial
number.ro DisplayString .1.3.6.1.4.1.890.1.5.8.2110.2.3 |
mes2110_MgtModManuDateThis object specifies the management module
manufacture date.ro DisplayString .1.3.6.1.4.1.890.1.5.8.2110.2.4 |
mes2110_MgtModRevThis object specifies the managemnt module fireware
revision number.ro DisplayString .1.3.6.1.4.1.890.1.5.8.2110.2.5 |
mes2110_MgtModDescThis object describes the management module.ro DisplayString .1.3.6.1.4.1.890.1.5.8.2110.2.6 |
communityStringROThis is the community string required to authenticate a read
access to all MIB objects except for the read-write objects.rw DisplayString .1.3.6.1.4.1.890.1.5.8.2110.2.7 |
communityStringRWThis is the community string required to authenticate a read
or write access to all MIB objects.rw DisplayString .1.3.6.1.4.1.890.1.5.8.2110.2.8 |
defaultGatewayThis object specifies the default gateway address.rw IpAddress .1.3.6.1.4.1.890.1.5.8.2110.2.9 |
interfaceIpAddressThis object identifies the IP address of the MIB-II
interface on the management module.rw IpAddress .1.3.6.1.4.1.890.1.5.8.2110.2.10 |
interfaceSubnetMaskThis object specifies the subnet mask associated with
the interface address of the module.rw IpAddress .1.3.6.1.4.1.890.1.5.8.2110.2.11 |
mgtStpThis object specifies the switch STP function.rw Enumeration .1.3.6.1.4.1.890.1.5.8.2110.2.12 |
trapManagerTableThis object contains the entries of Network Management Systems
to which traps will be sent. SEQUENCE OF TrapManagerTableEntry .1.3.6.1.4.1.890.1.5.8.2110.2.13 |
trapManagerTableEntryThis object specifies an entry in the trap manager table. TrapManagerTableEntry .1.3.6.1.4.1.890.1.5.8.2110.2.13.1 |
trapManagerIndexro INTEGER .1.3.6.1.4.1.890.1.5.8.2110.2.13.1.1 |
trapManagerIpAddressThis object specifies the IP address of the destination
of a network management system to which traps will be sent.rw IpAddress .1.3.6.1.4.1.890.1.5.8.2110.2.13.1.2 |
trapManagerNameThis object identifies the name of the destination of a
network management system to which traps will be sent.rw DisplayString .1.3.6.1.4.1.890.1.5.8.2110.2.13.1.3 |
trapManagerStatusThis object specifies a trap manager entry status in the trap
manager table. (1) Disabled.rw Enumeration .1.3.6.1.4.1.890.1.5.8.2110.2.13.1.4 |
mes2110_Port OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.2110.3 |
mes2110_PortTableThis object lists port entries on the mes2110 module. SEQUENCE OF Mes2110_PortEntry .1.3.6.1.4.1.890.1.5.8.2110.3.1 |
mes2110_PortEntryThis object specifies a port entry in the port table, mes2110_PortTable.
The port entry contains the information about a single port. Mes2110_PortEntry .1.3.6.1.4.1.890.1.5.8.2110.3.1.1 |
portIndexThis object is the port index, which uniquely identifies
a port. It ranges from 1 to the total port number.ro INTEGER .1.3.6.1.4.1.890.1.5.8.2110.3.1.1.1 |
portNameThis object specifies the user defined descriptive name
for the port.rw DisplayString .1.3.6.1.4.1.890.1.5.8.2110.3.1.1.2 |
portAdminStatusThis object specifies the port admin state. Setting this object
to disable(1) disables the port. Setting this object to enable(4)
enables the port.rw Enumeration .1.3.6.1.4.1.890.1.5.8.2110.3.1.1.3 |
portLinkStatusThis object indicates the link status attached to the port.ro Enumeration .1.3.6.1.4.1.890.1.5.8.2110.3.1.1.4 |
portSpeedModeThis object specifies the speed of the port, 10M(1) or 100M(2) or 100M(3).rw Enumeration .1.3.6.1.4.1.890.1.5.8.2110.3.1.1.5 |
portDuplexModeThis object specifies the duplex mode of the port, half duplex(1)
or full duplex(2).rw Enumeration .1.3.6.1.4.1.890.1.5.8.2110.3.1.1.6 |
portAutoThis object specifies the auto negotiation status of the port.rw Enumeration .1.3.6.1.4.1.890.1.5.8.2110.3.1.1.7 |
portFfcThis object specifies the force flow control status of a port.rw Enumeration .1.3.6.1.4.1.890.1.5.8.2110.3.1.1.8 |
mes2110_Traps OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.2110.4 |
almColdStartThis trap is sent when the system is started from
power down. TRAP-TYPE .1.3.6.1.4.1.890.1.5.8.2110.4.0.1 |
almWarmStartThis trap is sent when the system is reset. TRAP-TYPE .1.3.6.1.4.1.890.1.5.8.2110.4.0.2 |
almLinkUpThis trap is sent when the link associated with the
port indexed 'portIndex' changes its
'portLinkStatus' from down(2) to up(1). TRAP-TYPE .1.3.6.1.4.1.890.1.5.8.2110.4.0.3 |
almLinkDownThis trap is sent when the link associated with the
port indexed 'portIndex' changes its
'portLinkStatus' from up(1) to down(2). TRAP-TYPE .1.3.6.1.4.1.890.1.5.8.2110.4.0.4 |
almConfChangeThis trap is sent when the system configuration has
been changed. TRAP-TYPE .1.3.6.1.4.1.890.1.5.8.2110.4.0.5 |