ZYXEL-ES-EOC350
Detailed view of the defined objects, syntax rules, and hierarchical paths.
340
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
340 total| Object Name |
|---|
eoc350BrMib OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1 |
eocBrSystemGroup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.1 |
eocBrModelIdentify the bridge model.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.1.1 |
eocBrProductNameThe bridge product name.ro DisplayString .1.3.6.1.4.1.890.1.15.5.1.1.2 |
eocBrSystemMacThe 6-byte Ethernet Mac address of the bridge.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.1.3 |
eocBrEoCMacThe 6-byte EoC Mac address of the bridge self EoC Master.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.1.4 |
eocBrHardwareVersionThe bridge hardware version.ro DisplayString .1.3.6.1.4.1.890.1.15.5.1.1.5 |
eocBrBootVersionThe bridge boot loader version.ro DisplayString .1.3.6.1.4.1.890.1.15.5.1.1.6 |
eocBrSystemFwWorkingVersionThe bridge current working/running system firmware version.ro DisplayString .1.3.6.1.4.1.890.1.15.5.1.1.7 |
eocBrSystemFwUploadVersionThe stored system firmware version intended for upgrading
the bridge. The firmware is placed in the bridge 'upload'
area temporarily and is uploaded by TFTP or HTTP first.ro DisplayString .1.3.6.1.4.1.890.1.15.5.1.1.8 |
eocBrSystemFwUpgradeActionTo trigger upgrade operation of the bridge to replace
the current firmware (version eocBrSystemFwWorkingVersion) with
the new uploaded firmware (version eocBrSystemFwUploadVersion).
The SNMP manager can upgrade the system firmware by set the
value to activate(1); and submit to the bridge to start
the upgrade procedure. The status (eocBrSystemFwUpgradeStatus)
will go from inProgress(1) status back to the
initial normalOrComplete(0) status.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.1.9 |
eocBrSystemFwUpgradeStatusStatus for upgrade operation of the bridge to replace
the current firmware (version eocBrSystemFwWorkingVersion) with
the new uploaded firmware (version eocBrSystemFwUploadVersion).
The SNMP manager can upgrade the system firmware by set the
eocBrSystemFwUpgradeAction value to activate(1);
and submit to the bridge to start the upgrade procedure.
The status (eocBrSystemFwUpgradeStatus) will go from
inProgress(1) status back to the initial
normalOrComplete(0) status.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.1.10 |
eocBrSystemRebootActivate to reboot the bridge.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.1.11 |
eocBrAutoEPDrvUpgradeSync/Upgrade connected EoC EP driver from current 'working/running' version
to new 'upload' version automatically.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.1.15 |
eocBrIPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.2 |
eocBrIPAddressIP address of the bridge.rw IpAddress .1.3.6.1.4.1.890.1.15.5.1.2.1 |
eocBrSubnetMaskSubnet mask of the bridge.rw IpAddress .1.3.6.1.4.1.890.1.15.5.1.2.2 |
eocBrDefaultGatewayIPAddressDefault gateway for the bridge.rw IpAddress .1.3.6.1.4.1.890.1.15.5.1.2.3 |
eocBrPrimaryDnsIPAddressPrimary DNS for the bridge.rw IpAddress .1.3.6.1.4.1.890.1.15.5.1.2.4 |
eocBrSecondaryDnsIPAddressSecondary DNS for the bridge.rw IpAddress .1.3.6.1.4.1.890.1.15.5.1.2.5 |
eocBrIPAddressAssignMethod to assign the IP address for the bridge. Use the static IP or
obtain the dynamic IP from DHCP server by adopting DHCP client.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.2.6 |
eocBrDHCPLeaseThe DHCP IP leased period if the bridge adopt the DHCP client (dynamic-dhcp)
to get the IP address. Void if bridge is assigned with static IP.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.2.8 |
eocBrHostDHCPPadOpt82EnableCtrlPad the DHCP relay agent information or not. While enabled, bridge will pad DHCP packets
sourced from hosts behind EP with option 82 information (Circuit ID and Remote ID).
DHCP server could use the record of (assigned IP, Circuit ID, Remote ID)
for IP address assignment management and usage tracking. Circuit ID is the bridge
Ethernet Mac address and Remote ID is the EP device Mac address.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.2.10 |
eocBrHostIPSourceGuardCtrlEnable the IP Source Guard or not. While enabled, bridge will snoop the DHCP
traffic passed to/from host and allow only host with IP/Mac via DHCP could access
the network.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.2.12 |
eocBrHostDHCPTableA table that contains host device DHCP gleaning information behind each EP. SEQUENCE OF EoCBrHostDHCPEntry .1.3.6.1.4.1.890.1.15.5.1.2.13 |
eocBrHostDHCPEntryAn entry in the gleaning host DHCP list table. EoCBrHostDHCPEntry .1.3.6.1.4.1.890.1.15.5.1.2.13.1 |
eocBrHostDHCPIndexThe gleaning host DHCP entry index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.2.13.1.1 |
eocBrHostDHCPEPMacEP device Mac address of current attached host DHCP entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.2.13.1.3 |
eocBrHostDHCPHostMacHost Mac address of current host DHCP entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.2.13.1.4 |
eocBrHostDHCPIPAddressIP address of current host DHCP entry.ro IpAddress .1.3.6.1.4.1.890.1.15.5.1.2.13.1.5 |
eocBrHostDHCPLeaseRemained lease time of current host DHCP entry.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.2.13.1.6 |
eocBrAutoConfigEnable the Auto-Config function or not. While enabled, bridge will try to retrieve
the Master and all connected EP config files from the designated Auto-Config
directory 'eocBrAutoConfigTFTPExtensionPath' at server
'eocBrAutoConfigTFTPServer' via TFTP. Usually the 'Extension Path'
and 'TFTP Server IP Address' are obtained during the DHCP client handshaking.
For example, power on the bridge, it will start DHCP client and get the
Auto-Config TFTP related parameters. If the Auto-Config is ON,
bridge then begins to retrieve the config files of Master/EP.
Setup Master/EP devices accordingly.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.2.15 |
eocBrAutoConfigTFTPServerIPAddressThe IP address of the Auto-Config TFTP server, from which
the management bridge can Get the Master/EP config files.rw IpAddress .1.3.6.1.4.1.890.1.15.5.1.2.16 |
eocBrAutoConfigTFTPExtensionPathThe extension directory path of files to be retrieved
(TFTP Get) from the Auto-Config TFTP server.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.2.17 |
eocBrAutoConfigTFTPServerFQDN or IP address of the Auto-Config TFTP server, from which
the management bridge can Get the Master/EP config files.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.2.18 |
eocBrAdminGroup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.4 |
eocBrAccountTableA table that contains administrator account information. SEQUENCE OF EoCBrAccountEntry .1.3.6.1.4.1.890.1.15.5.1.4.1 |
eocBrAccountEntryAn entry in the administrator account table. EoCBrAccountEntry .1.3.6.1.4.1.890.1.15.5.1.4.1.1 |
eocBrAccountIndexAccount index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.4.1.1.1 |
eocBrAccountNameAccount user name.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.4.1.1.2 |
eocBrAccountPasswdAccount password.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.4.1.1.3 |
eocBrAccountPrivilegeAccount privilege.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.4.1.1.4 |
eocBrAccountRowStatusTo create, delete or modify a administrator account(one row) in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.4.1.1.5 |
eocBrAllowIPProtocolTableA table that contains permitted source IP addresses with allowable protocols to access the bridge. SEQUENCE OF EoCBrAllowIPProtocolEntry .1.3.6.1.4.1.890.1.15.5.1.4.2 |
eocBrAllowIPProtocolEntryAn entry for permitted source IP address and protocol to access the bridge. EoCBrAllowIPProtocolEntry .1.3.6.1.4.1.890.1.15.5.1.4.2.1 |
eocBrAllowIndexAllowed host index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.4.2.1.1 |
eocBrAllowIPAddressSpecify the permitted source IP address.rw IpAddress .1.3.6.1.4.1.890.1.15.5.1.4.2.1.2 |
eocBrAllowSubnetMaskSpecify the permitted subnet.rw IpAddress .1.3.6.1.4.1.890.1.15.5.1.4.2.1.3 |
eocBrAllowTelnetAllow TELNET or not.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.4.2.1.4 |
eocBrAllowHttpAllow HTTP or not.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.4.2.1.5 |
eocBrAllowSnmpAllow SNMP or not.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.4.2.1.6 |
eocBrAllowIcmpPingAllow ping or not.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.4.2.1.7 |
eocBrAllowRowStatusTo create, delete or modify a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.4.2.1.8 |
eocBrStaticMacTableA table that contains static Mac addresses binding to specific Ethernet port of the bridge. SEQUENCE OF EoCBrStaticMacEntry .1.3.6.1.4.1.890.1.15.5.1.4.3 |
eocBrStaticMacEntryAn entry for static Mac. EoCBrStaticMacEntry .1.3.6.1.4.1.890.1.15.5.1.4.3.1 |
eocBrStaticMacIndexStatic Mac index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.4.3.1.1 |
eocBrStaticMacAddressSpecify the static Mac address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.4.3.1.2 |
eocBrStaticMacBindingPortSpecify the static Mac binding Ethernet port index.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.4.3.1.3 |
eocBrStaticMacRowStatusTo create, delete or modify a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.4.3.1.4 |
eocBrServiceGroup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.5 |
eocBrTelnet OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.5.1 |
eocBrTelnetEnableCtrlActivate TELNET server or not.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.5.1.1 |
eocBrTelnetPortNumTELNET server listen port number.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.5.1.2 |
eocBrTelnetExpiryInSecondsTELNET server idle timer (in seconds), logout automatically if expired.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.5.1.3 |
eocBrHttp OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.5.2 |
eocBrHttpEnableCtrlActivate HTTP server or not.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.5.2.1 |
eocBrHttpPortNumHTTP server listen port number.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.5.2.2 |
eocBrSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.5.3 |
eocBrSnmpEnableCtrlActivate SNMP agent or not.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.5.3.1 |
eocBrSnmpPortNumSNMP agent listen port number.ro INTEGER .1.3.6.1.4.1.890.1.15.5.1.5.3.2 |
eocBrSnmpNameSNMP managed bridge name.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.5.3.3 |
eocBrSnmpContactSNMP managed bridge contact information.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.5.3.4 |
eocBrSnmpLocationSNMP managed bridge location information.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.5.3.5 |
eocBrSnmpReadWriteCommunitySNMP managed bridge read-write community.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.5.3.6 |
eocBrSnmpReadOnlyCommunitySNMP managed bridge read-only community.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.5.3.7 |
eocBrSnmpTrapEnableTableA table that turn on/off specific SNMP trap service. SEQUENCE OF EoCBrSnmpTrapEnableEntry .1.3.6.1.4.1.890.1.15.5.1.5.3.8 |
eocBrSnmpTrapEnableEntryAn entry that turn on/off specific SNMP trap service. EoCBrSnmpTrapEnableEntry .1.3.6.1.4.1.890.1.15.5.1.5.3.8.1 |
eocBrSnmpTrapEnableIndexSNMP trap type index to be enabled or disabled .ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.5.3.8.1.1 |
eocBrSnmpTrapEnableTypeSNMP trap type to be enabled or disabled .ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.5.3.8.1.2 |
eocBrSnmpTrapEnableCtrlEnable or disable this SNMP trap type.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.5.3.8.1.3 |
eocBrSnmpTrapTableA table that contains SNMP trap service information. SEQUENCE OF EoCBrSnmpTrapEntry .1.3.6.1.4.1.890.1.15.5.1.5.3.9 |
eocBrSnmpTrapEntryAn entry for SNMP trap service. EoCBrSnmpTrapEntry .1.3.6.1.4.1.890.1.15.5.1.5.3.9.1 |
eocBrSnmpTrapIndexSNMP trap target index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.5.3.9.1.1 |
eocBrSnmpTrapServerDestined SNMP trap server name, FQDN or IP address.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.5.3.9.1.2 |
eocBrSnmpTrapPortNumSNMP trap UDP port number.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.5.3.9.1.4 |
eocBrSnmpTrapCommunityCommunity for this SNMP trap.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.5.3.9.1.5 |
eocBrSnmpTrapRowStatusTo create, delete or modify a SNMP trap entry(one row) in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.5.3.9.1.6 |
eocBrSyslogTableA table that contains Syslog service information. SEQUENCE OF EoCBrSyslogEntry .1.3.6.1.4.1.890.1.15.5.1.5.4 |
eocBrSyslogEntryAn entry for Syslog service. EoCBrSyslogEntry .1.3.6.1.4.1.890.1.15.5.1.5.4.1 |
eocBrSyslogIndexSyslog server index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.5.4.1.1 |
eocBrSyslogServerDestined Syslog server name, FQDN or IP address.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.5.4.1.2 |
eocBrSyslogIPAddressDestined Syslog server IP address.rw IpAddress .1.3.6.1.4.1.890.1.15.5.1.5.4.1.3 |
eocBrSyslogSeverityDefine the Syslog severity level for Syslog server.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.5.4.1.4 |
eocBrSyslogRowStatusTo create, delete or modify a Syslog server entry(one row) in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.5.4.1.5 |
eocBrSntp OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.5.5 |
eocBrSntpEnableCtrlActivate SNTP service or not.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.5.5.1 |
eocBrSntpPrimaryServerSNTP server 1, FQDN or IP address.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.5.5.2 |
eocBrSntpSecondaryServerSNTP server 2, FQDN or IP address.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.5.5.3 |
eocBrSntpTimeZoneSNTP locale time zone.gmt-plus-0800 means 'GMT + 8 hours'.
The value in 0~127 is ( GMT + value*15 minutes );
value in 128~256 is ( GMT - (256-value)*15 minutes ).rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.5.5.4 |
eocBrSntpQueryPeriodInMinutesSNTP queried period, in minutes.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.5.5.5 |
eocBrSntpCurrentTimeSNTP queried time.ro DisplayString .1.3.6.1.4.1.890.1.15.5.1.5.5.6 |
eocBrSyslogCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.5.6 |
eocBrSyslogOverTcpUdpRunning Syslog over UDP(default) or TCP.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.5.6.1 |
eocBrSyslogPortNumSyslog TCP/UDP port number.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.5.6.2 |
eocBrMasterEoCGroup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.7 |
eocBrMasterMacThe Master device EoC Mac address.
Usually refers the managed bridge itself EoC interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.7.1 |
eocBrMasterNoteFootnote for the Master device.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.7.2 |
eocBrMasterModelThe Master device model. Usually the management bridge itself.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.7.3 |
eocBrMasterProductNameThe Master device product name. Usually the management bridge itself.ro DisplayString .1.3.6.1.4.1.890.1.15.5.1.7.4 |
eocBrMasterWorkingPrivacyModeDisplay the current/queried/working 'Privacy Mode' of Master device.
If 'Privacy Mode' is on, the Master device will check if its 'Privacy Key'
matches with the EP device's 'Privacy Key' to accept EP device's packets.
If 'Privacy Mode' is off instead, Master device will accept connection
from EP device without checking 'Privacy Key'.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.7.5 |
eocBrMasterSettingPrivacyModeFor Master device to activate 'Privacy Mode' or not ? Decide if the
Master device need to check EP device's 'Privacy Key' to
allow connection. Changed 'Privacy Mode' will take effect
after upgrading Master device driver.
(replace eocBrMasterWorkingPrivacyMode with
eocBrMasterSettingPrivacyMode after
eocBrMasterDrvUpgradeAction completes).rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.7.6 |
eocBrMasterWorkingPrivacyKeyDisplay the current/queried/working 'Privacy Key' of Master device.ro INTEGER .1.3.6.1.4.1.890.1.15.5.1.7.7 |
eocBrMasterSettingPrivacyKeyTo setup the 'Privacy Key' for Master device
and other connected EP devices. Changed 'Privacy Key' will
take effect after upgrading 'Master/EP' device driver.
(activate eocBrMasterDrvUpgradeAction/eocBrEPDrvUpgradeAction
to replace eocBrMasterWorkingPrivacyKey/eocBrEPWorkingPrivacyKey with
eocBrMasterSettingPrivacyKey).rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.7.8 |
eocBrMasterDrvWorkingVersionIdentify the working/running driver version of the EoC chipset
resides in the Master device. Normally the bridge itself is
selected as the Master device.ro DisplayString .1.3.6.1.4.1.890.1.15.5.1.7.9 |
eocBrMasterDrvUploadVersionIdentify the stored Master driver version intended for upgrading
the EoC chipset of the Master device . The driver is placed in the
'upload' area temporarily and is uploaded by TFTP or HTTP first.ro DisplayString .1.3.6.1.4.1.890.1.15.5.1.7.10 |
eocBrMasterDrvUpgradeActionTo trigger upgrade operation of the Master device to replace
the current driver (version eocBrMasterWorkingEoCDrvVer) with
the new uploaded driver (version eocBrMasterUploadEoCDrvVer).
The SNMP manager can upgrade the EoC Master device by set the
value to activate(1); and submit to the bridge to start
the upgrade procedure. The status (eocBrMasterDrvUpgradeStatus)
will go from inProgress(1) status back to the initial
normalOrComplete(0) status.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.7.11 |
eocBrMasterDrvUpgradeStatusStatus for upgrade operation of the Master device to replace
the current driver (version eocBrMasterWorkingEoCDrvVer) with
the new uploaded driver (version eocBrMasterUploadEoCDrvVer).
The SNMP manager can upgrade the EoC Master device by set the
eocBrMasterDrvUpgradeAction value to activate(1);
and submit to the bridge to start the upgrade procedure.
The status (eocBrMasterDrvUpgradeStatus) will go from
inProgress(1) status back to the initial normalOrComplete(0) status.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.7.12 |
eocBrMasterScanEPActionTo trigger scan operation issued by the Master device to find
all the on-line EP devices. That is, force to refresh all EP status.
The SNMP manager can set this value to activate(1) to start the
scan procedure. The status (eocBrMasterScanEPStatus) will go from
inProgress(1) status back to the initial normalOrComplete(0) status.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.7.13 |
eocBrMasterScanEPStatusStatus for scan operation issued by the Master device to find
all the on-line EP devices. That is, force to refresh all EP status.
The SNMP manager can set the eocBrMasterScanEPAction value to activate(1)
to start the scan procedure. The status (eocBrMasterScanEPStatus)
will go from inProgress(1) status back to the initial
normalOrComplete(0) status.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.7.14 |
eocBrMasterRebootActivate to reboot the EoC Master device (whole EoC link). Will go back to the initial idle(0) while completes.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.7.15 |
eocBrEPEoCGroup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.8 |
eocBrEPTableA table that contains EP devices (EndPoint or Slave device) management information. SEQUENCE OF EoCBrEPEntry .1.3.6.1.4.1.890.1.15.5.1.8.1 |
eocBrEPEntryAn entry in the EP management table. EoCBrEPEntry .1.3.6.1.4.1.890.1.15.5.1.8.1.1 |
eocBrEPIndexThe EP device index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.8.1.1.1 |
eocBrEPMacThe EP device Mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.8.1.1.2 |
eocBrEPNoteFootnote for the EP device.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.8.1.1.3 |
eocBrEPModelThe EP device model.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.8.1.1.4 |
eocBrEPProductNameThe EP device product name.ro DisplayString .1.3.6.1.4.1.890.1.15.5.1.8.1.1.5 |
eocBrEPOnlineStatusThe EP on-line status.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.8.1.1.6 |
eocBrEPHostCountLimitSpecify the planned allowable maximum number of hosts
attached to the EP device.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.8.1.1.8 |
eocBrEPWorkingPrivacyKeyMatchedDisplay the status if the EP device's 'Privacy Key' is consistent
with Master device's 'Privacy Key'. If 'Privacy Mode' is on,
you will need the matched 'Privacy Key' for connection.
If 'Privacy Mode' is off, the 'Privacy Key' is irrelevant.
Need to upgrade the EP device driver in order to let
the EP device have the matched 'Privacy Key' for connection.
(activate eocBrEPDrvUpgradeAction to replace EP device's
'Privacy Key' with eocBrMasterSettingPrivacyKey).ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.8.1.1.12 |
eocBrEPDrvWorkingVersionThe current working/running EoC driver version
in the connected EP device.ro DisplayString .1.3.6.1.4.1.890.1.15.5.1.8.1.1.13 |
eocBrEPDrvUploadVersionIdentify the stored EP driver version intended for upgrading
the EoC chipset of the EP device . The driver is placed in the
bridge 'upload' area temporarily and is uploaded by
TFTP or HTTP first.ro DisplayString .1.3.6.1.4.1.890.1.15.5.1.8.1.1.14 |
eocBrEPDrvUpgradeActionTo trigger upgrade operation of the EP devices to replace
the current driver (version eocBrEPWorkingEoCDrvVer) with
the new uploaded driver (version eocBrEPUploadEoCDrvVer).
The SNMP manager can upgrade the EoC EP device by set the
value to activate(1); and submit to the bridge to start the
upgrade procedure. The status (eocBrEPDrvUpgradeStatus)
will go from inProgress(1) status back to the initial
normalOrComplete(0) status.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.8.1.1.15 |
eocBrEPDrvUpgradeStatusStatus for upgrade operation of the EP devices to replace
the current driver (version eocBrEPWorkingEoCDrvVer) with
the new uploaded driver (version eocBrEPUploadEoCDrvVer).
The SNMP manager can upgrade the EoC EP device by set the
eocBrEPDrvUpgradeAction value to activate(1); and submit
to the bridge to start the upgrade procedure. The status
(eocBrEPDrvUpgradeStatus) will go from inProgress(1)
status back to the initial normalOrComplete(0) status.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.8.1.1.16 |
eocBrEPPhyDiagActionTo trigger the physical link diagnosis operation between
the Master device and the current selected EP device.
The traffic will be ceased during the diagnosis.
The diagnosed results may include the SNR/LineRate/PacketErrorRate/RxPower
for both the DnLink:'Transmit'(Tx)-to-EP and
UpLink:'Receive'(Rx)-from-EP operation.
The SNMP manager can set this value to activate(1) to
start the diagnosis procedure. The status (eocBrEPPhyDiagStatus)
will go from inProgress(1) status back to the initial
normalOrComplete(0) status.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.8.1.1.17 |
eocBrEPPhyDiagStatusStatus for the physical link diagnosis operation between
the Master device and the current selected EP device.
The diagnosed results include the SNR/LineRate/PacketErrorRate/RxPower
for both the DnLink:'Transmit'(Tx)-to-EP and
UpLink:'Receive'(Rx)-from-EP operation.
The SNMP manager can set the eocBrEPPhyDiagAction value
to activate(1) to start the diagnosis procedure. The status
(eocBrEPPhyDiagStatus) will go from inProgress(1) status back
to the initial normalOrComplete(0) status.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.8.1.1.18 |
eocBrEPDiagDnLinkResultThe result of the DnLink:'Transmit'(Tx)-to-EP diagnosis. Include the following,
Signal-to-Noise Ratio(SNR): The reasonable value should fall into 30dB~35dB.
Packet-Error-Ratio(PER): 1% means 1 error packet in 100 transmitted packets.
Line-Rate: The payload encoded(PE) speed, for example 32*7 is 224Mbps.
RxPWR: signal power level at EP receiving -60dBm~+15dBm.ro DisplayString .1.3.6.1.4.1.890.1.15.5.1.8.1.1.19 |
eocBrEPDiagUpLinkResultThe result of the UpLink:'Receive'(Rx)-from-EP diagnosis. Include the following,
Signal-to-Noise Ratio(SNR): The reasonable value should fall into 30dB~35dB.
Packet-Error-Ratio(PER): 1% means 1 error packet in 100 received packets.
Line-Rate: The payload encoded(PE) speed, for example 32*7 is 224Mbps.
RxPWR: signal power level at Master receiving -60dBm~+15dBm.ro DisplayString .1.3.6.1.4.1.890.1.15.5.1.8.1.1.20 |
eocBrEPOnlineDiagActionTo trigger the alive link diagnosis operation between
the Master device and the current selected EP device.
Maintain the connection while running the diagnosis.
The diagnosed results include the on-line SNR/LineRate/RxPower
for both the DnLink:'Transmit'(Tx)-to-EP and
UpLink:'Receive'(Rx)-from-EP operation.
The SNMP manager can set this value to activate(1) to
start the diagnosis procedure. The status (eocBrEPOnlineDiagStatus)
will go from inProgress(1) status back to the initial
normalOrComplete(0) status.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.8.1.1.21 |
eocBrEPOnlineDiagStatusStatus for the alive diagnosis operation between
the Master device and the current selected EP device.
The diagnosed results include the on-line SNR/LineRate/RxPower
for both the DnLink:'Transmit'(Tx)-to-EP and
UpLink:'Receive'(Rx)-from-EP operation.
The SNMP manager can set the eocBrEPOnlineDiagAction value
to activate(1) to start the diagnosis procedure. The status
(eocBrEPOnlineDiagStatus) will go from inProgress(1) status back
to the initial normalOrComplete(0) status.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.8.1.1.22 |
eocBrEPRowStatusReduced RowStatus Set to destroy/delete a EP entry (one row) in this table.
The on-line EP ('eocBrOnlineStatus' is 'on') can not be destroyed.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.8.1.1.27 |
eocBrEPMacInfoTableA table that contains host Mac information behind each EP. SEQUENCE OF EoCBrEPMacInfoEntry .1.3.6.1.4.1.890.1.15.5.1.8.2 |
eocBrEPMacInfoEntryAn entry in the EP host Mac list table. EoCBrEPMacInfoEntry .1.3.6.1.4.1.890.1.15.5.1.8.2.1 |
eocBrEP-IndexThe device Mac index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.8.2.1.1 |
eocBrEP-MacTypeThe device Mac type. 0/1 for EoC device self Mac(EP/Master), 2 for host device (as PC)ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.8.2.1.2 |
eocBrEP-EPMacThe EP device Mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.8.2.1.3 |
eocBrEP-HostMacThe host Mac address .ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.8.2.1.4 |
eocBrEPNetPerTableA table that contains EP device line condition monitored by tool NetPer. SEQUENCE OF EoCBrEPNetPerEntry .1.3.6.1.4.1.890.1.15.5.1.8.3 |
eocBrEPNetPerEntryAn entry in the EP NetPer table. EoCBrEPNetPerEntry .1.3.6.1.4.1.890.1.15.5.1.8.3.1 |
eocBrEPNetPerIndexThe EP device index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.8.3.1.1 |
eocBrEPNetPerEPMacThe EP device Mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.8.3.1.2 |
eocBrEPNetPerDnLinkSNRThe diagnosed down-link SNR(Signal-to-Noise Ratio, unit dB) of the 'Transmit'(Tx) to EP operation.
It is equivalent to on-line Tx SNR in 'eocBrEPOnlineDiagStatus'.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.8.3.1.3 |
eocBrEPNetPerUpLinkSNRThe diagnosed up-link SNR(Signal-to-Noise Ratio, unit dB) of the 'Receive'(Rx) from EP operation.
It is equivalent to on-line Rx SNR in 'eocBrEPOnlineDiagStatus'.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.8.3.1.4 |
eocBrEPNetPerDnLinkRateThe down-link payload encoded(PE) line(phy) speed (unit Mbps) in the 'Transmit'(Tx) to EP operation.
For example, 224 tells the Tx rate is 224Mbps.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.8.3.1.5 |
eocBrEPNetPerUpLinkRateThe up-link payload encoded(PE) line(phy) speed (unit Mbps) in 'Receive'(Rx) from EP operation.
For example, 224 tells the Rx rate is 224Mbps.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.8.3.1.6 |
eocBrEPNetPerDnLinkRxPwrThe receiving down-link signal power level at EP side (Master Tx to EP),
ranges -60dBm~+15dBm normally.ro INTEGER (-127..128) .1.3.6.1.4.1.890.1.15.5.1.8.3.1.7 |
eocBrEPNetPerUpLinkRxPwrThe receiving up-link signal power level at Master side (Master Rx from EP),
ranges -60dBm~+15dBm normally.ro INTEGER (-127..128) .1.3.6.1.4.1.890.1.15.5.1.8.3.1.8 |
eocBrEPScanMacInfo OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.8.4 |
eocBrEPScanMacInfoActionTo trigger scan operation to refresh the EP device Mac and host Mac list table.
That is, force to refresh on-line host device list.
The SNMP manager can set this value to activate(1) to start the
scan procedure. The status (eocBrEP-ScanMacInfoStatus) will go from
inProgress(1) status back to the initial normalOrComplete(0) status.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.8.4.1 |
eocBrEPScanMacInfoStatusStatus for scan operation to find the EP device Mac and host Mac list table.
That is, force to refresh on-line host device list.
The SNMP manager can set the (eocBrEP-ScanMacInfoAction) value to activate(1)
to start the scan procedure. The status (eocBrEP-ScanMacInfoStatus)
will go from inProgress(1) status back to the initial
normalOrComplete(0) status.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.8.4.2 |
eocBrEPPayloadEncodeTableA table that contains EP device payload encoded channel rate. SEQUENCE OF EoCBrEPPayloadEncodeEntry .1.3.6.1.4.1.890.1.15.5.1.8.5 |
eocBrEPPayloadEncodeEntryAn entry in the EP payload encoded channel rate table. EoCBrEPPayloadEncodeEntry .1.3.6.1.4.1.890.1.15.5.1.8.5.1 |
eocBrEPPayloadEncodeIndexThe EP device index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.8.5.1.1 |
eocBrEPPayloadEncodeEPMacThe EP device Mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.8.5.1.2 |
eocBrEPPayloadEncodeDnRateThe down-link payload encoded channel rate(as line rate, unis is Mbps) from Master toward EP.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.8.5.1.3 |
eocBrEPPayloadEncodeUpRateThe up-link payload encoded channel rate(as line rate, unit is Mbps) from EP toward Master.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.8.5.1.4 |
eocBrTFTPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.9 |
eocBrTFTPServerIPAddressThe IP address of a TFTP server, from which the management bridge
can Get the firmware/driver image file. Image file will first
upload to the management bridge itself, then activate the upgrade
procedure to replace the working image with the uploaded one.
The TFTP Get procedure may be initiated by setting
the eocBrTFTPGetAction to activate(1).rw IpAddress .1.3.6.1.4.1.890.1.15.5.1.9.1 |
eocBrTFTPFilenameThe name of the firmware/driver image file to retrieve
(TFTP Get) at the TFTP server whose address is given by
eocBrTFTPServer.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.9.2 |
eocBrTFTPGetActionTo trigger TFTP Get operation, the SNMP manager need to set the
value to activate(1); and submit to the bridge to start
the TFTP Get procedure. The status (eocBrTFTPGetStatus) will go
from inProgress(1) status back to the initial normalOrComplete(0)
status. TFTP Get will attempt to retrieve a firmware/driver file
from the TFTP server whose address is given by eocBrTFTPServer.
The filename is given by eocBrTFTPFilename. Both
eocBrTFTPServer and eocBrTFTPFilename must be correct
for the TFTP operation to proceed.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.9.3 |
eocBrTFTPGetStatusStatus for the TFTP Get operation, the SNMP manager need to set the
eocBrTFTPGetAction value to activate(1); and submit to the bridge
to start the TFTP Get procedure. The status (eocBrTFTPGetStatus)
will go from inProgress(1) status back to the initial
normalOrComplete(0) status. TFTP Get will attempt to retrieve
a firmware/driver file from the TFTP server whose address
is given by eocBrTFTPServer. The filename is given by
eocBrTFTPFilename. Both eocBrTFTPServer and
eocBrTFTPFilename must be correct for the TFTP operation to proceed.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.9.4 |
eocBrTFTPExtensionPathThe extension directory path of the file to retrieve
(TFTP Get) at the TFTP server whose address is given by
eocBrTFTPServer.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.9.5 |
eocBrTFTPServerTFTP server name, FQDN or IP address.rw DisplayString .1.3.6.1.4.1.890.1.15.5.1.9.6 |
eocBrEtherGroup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.10 |
eocBrEtherPort OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.10.1 |
eocBrPortPropTableA table that contains Ethernet port properties. SEQUENCE OF EoCBrPortPropEntry .1.3.6.1.4.1.890.1.15.5.1.10.1.1 |
eocBrPortPropEntryAn entry in the port properties table. EoCBrPortPropEntry .1.3.6.1.4.1.890.1.15.5.1.10.1.1.1 |
eocBrPortPropPIDPort index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.10.1.1.1.1 |
eocBrPortPropTypePort type.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.1.1.1.2 |
eocBrPortPropConfigConfigure Ethernet port properties.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.1.1.1.3 |
eocBrPortPropLinkStatusEthernet port current link status.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.1.1.1.4 |
eocBrPortPropInRateCtrlEnable/disable the maximum input(ingress) rate control for the port.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.1.1.1.6 |
eocBrPortPropInRateConfigure the maximum input(ingress) rate in 64kbps (n*64kbps)for the port.
(maximum bandwidth between 0~200Mbps)
For example, value '0' will shut it off and value '4' means
the maximum rate is '4*64k=256kbps'.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.10.1.1.1.7 |
eocBrPortPropOutRateCtrlEnable/disable the maximum output(egress) rate control for the port.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.1.1.1.8 |
eocBrPortPropOutRateConfigure the maximum output(egress) rate in 64kbps (n*64kbps)for the port.
(maximum bandwidth between 0~200Mbps) .
For ex maple, value '0' will shut it off and value '4' means
the maximum rate is '4*64k=256kbps'.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.10.1.1.1.9 |
eocBrPortStatsTableA table that contains port statistics. SEQUENCE OF EoCBrPortStatsEntry .1.3.6.1.4.1.890.1.15.5.1.10.1.2 |
eocBrPortStatsEntryAn entry in the port statistics table. EoCBrPortStatsEntry .1.3.6.1.4.1.890.1.15.5.1.10.1.2.1 |
eocBrPortStatsPIDPort index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.10.1.2.1.1 |
eocBrPortStatsTypePort type.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.1.2.1.2 |
eocBrPortStatsRxPktsPort statistics.ro Counter64 .1.3.6.1.4.1.890.1.15.5.1.10.1.2.1.3 |
eocBrPortStatsRxBytesPort statistics.ro Counter64 .1.3.6.1.4.1.890.1.15.5.1.10.1.2.1.4 |
eocBrPortStatsTxPktsPort statistics.ro Counter64 .1.3.6.1.4.1.890.1.15.5.1.10.1.2.1.5 |
eocBrPortStatsTxBytesPort statistics.ro Counter64 .1.3.6.1.4.1.890.1.15.5.1.10.1.2.1.6 |
eocBrPortStatsCollisionsPort statistics.ro Counter64 .1.3.6.1.4.1.890.1.15.5.1.10.1.2.1.7 |
eocBrPortStatsErrorsPort statistics.ro Counter64 .1.3.6.1.4.1.890.1.15.5.1.10.1.2.1.8 |
eocBrStatsCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.10.1.3 |
eocBrStatsCtrlResetTo clear/reset statistics, the SNMP manager need to set the
value to activate(1); and submit to the bridge to clear all
statistics. The value will back to idle(0) once reset has completed.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.1.3.1 |
eocBrStatsCtrlRefreshTo refresh/reload statistics, the SNMP manager need to set the
value to activate(1); and submit to the bridge to refresh all
statistics. The value will back to idle(0) once completed.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.1.3.2 |
eocBrEtherQoS OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.10.2 |
eocBrTcpUdpPriTableA table that maps packets with specified TCP/UDP port number
to prioritized Queues for QoS. SEQUENCE OF EoCBrTcpUdpPriEntry .1.3.6.1.4.1.890.1.15.5.1.10.2.2 |
eocBrTcpUdpPriEntryAn entry for mapping one specified TCP/UDP port number to
one prioritized Queue. EoCBrTcpUdpPriEntry .1.3.6.1.4.1.890.1.15.5.1.10.2.2.1 |
eocBrTcpUdpRuleNumTCP/UDP rule numbering value.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.10.2.2.1.1 |
eocBrTcpUdpEnableCtrlEnable TCP/UDP port priority or not.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.2.2.1.2 |
eocBrTcpUdpPortNumSpecify the TCP/UDP port number to be mapped.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.10.2.2.1.3 |
eocBrTcpUdpMappedQueueSpecify the mapped Queue for the TCP/UDP port number.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.2.2.1.4 |
eocBrQueueSchTypeThe packets priority queue scheduling mechanism. There are 3 different
modes: 'Strict priority(SP)', 'Weighted fair queue(WFR)' and 'Mixed SP & WFR'.
SP: Packets residing in the higher priority queues transmit first.
Lower priority packets transmit once these queues are emptied.
Highest priority Q3 goes first always, follows Q2 if Q3 is empty,
then Q1 and lowest Q0.
WFR:Each queue is assigned a service weight ratio that determines how many
packets are sent from it. Weight is fixed at 8:4:2:1 for Q3:Q2:Q1:Q0.
MIX:Highest priority Q3 use SP, and other queues conform to WFR at 4:2:1 weight.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.2.3 |
eocBrPriSchemeSelectSetup which packet field for priority queue mapping.
802.1p:Based on packet's 802.1p field for priority queue mapping.
7/6 goes to Q3 (highest priority), 5/4 to Q2, 3/2 to Q1, 1/0 to Q0(lowest priority).
IP: Based on packet's IP TOS/TC or DSCP field for priority queue mapping.
The precedence 2 bits in this field (DSCP/TOS/TC) decide the destined priority queue (Q3/Q2/Q1/Q0).
b'11 goes to Q3, b'10 to Q2, b01 to Q1, and b'00 to Q0.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.2.4 |
eocBrEtherIGMPSnoop OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.10.3 |
eocBrIGMPSnoopEnableCtrlEnable IGMP v1/v2 Snooping or not. Not support IGMP v3 Snooping.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.3.1 |
eocBrEtherTagVLAN OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.10.4 |
eocBrTagVLANEnableCtrlEnable Tagged VLAN(802.1Q) or not.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.4.1 |
eocBrTagPortTableTable of Ethernet Tagged VLAN(802.1Q) information. SEQUENCE OF EoCBrTagPortEntry .1.3.6.1.4.1.890.1.15.5.1.10.4.2 |
eocBrTagPortEntryAn entry in the Ethernet Tagged VLAN(802.1Q) table. EoCBrTagPortEntry .1.3.6.1.4.1.890.1.15.5.1.10.4.2.1 |
eocBrTagPortPIDPort index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.10.4.2.1.1 |
eocBrTagPortTypePort type.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.4.2.1.2 |
eocBrTagPortPriorityThe default 802.1p priority value of current port.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.10.4.2.1.3 |
eocBrTagPortVIDThe default VLAN ID (VID) of current port.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.10.4.2.1.4 |
eocBrTagPortInRuleDefines the 'action' (ingress rule) on packet enters current port.
all(0)->accept all(untagged/tagged) pkt and tag the untagged pkt.
tag(1)->accept tagged pkt only.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.4.2.1.5 |
eocBrTagPortOutRuleDefines the 'action' (egress rule) on packet output from current port.
untag(0)-> remove tag from tagged pkt.
tag(1)-> tag all output pkt.
bypass(2)-> pass through either tagged or untagged pkt.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.4.2.1.6 |
eocBrEtherCascadeLan OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.10.5 |
eocBrCascadeModeEnable to cascade multiple bridges via port LAN2 and LAN1, alike daisy chain.
mode 0: disable
mode 1: LAN1 as downstream Link and LAN2 as upstream link
mode 2: LAN2 as downstream Link and LAN1 as upstream link
mode 3: downstream Link and upstream link are decided by STP
automatically (STP: spanning tree protocol)rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.10.5.1 |
eocBrEPEtherGroup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.11 |
eocBrEPDesignate OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.11.1 |
eocBrEPDesignateTableA table that contains EP for selection/choosing to be managed by
eocBrEPEtherGroup.eocBrEPEtherPort SNMP management items. SEQUENCE OF EoCBrEPDesignateEntry .1.3.6.1.4.1.890.1.15.5.1.11.1.1 |
eocBrEPDesignateEntryAn entry in the EP selection/choosing table. EoCBrEPDesignateEntry .1.3.6.1.4.1.890.1.15.5.1.11.1.1.1 |
eocBrEPDesignateEPIndexDesignate EP index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.1.1.1.1 |
eocBrEPDesignateEPMacThe EP device Mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.11.1.1.1.2 |
eocBrEPDesignateOnlineStatusThe EP device on-line status.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.1.1.1.3 |
eocBrEPDesignateDeviceVersionThe EP device hardware version.ro INTEGER .1.3.6.1.4.1.890.1.15.5.1.11.1.1.1.4 |
eocBrEPDesignateIsSmartIs it the Smart EP ? Only the Smart EP device is configurable.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.1.1.1.6 |
eocBrEPDesignateIsTargetChoose the target
to its Ethernet port properties.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.1.1.1.7 |
eocBrEPEtherPort OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.11.2 |
eocBrEPPortPropTableA table that contains designated EP Ethernet port properties. SEQUENCE OF EoCBrEPPortPropEntry .1.3.6.1.4.1.890.1.15.5.1.11.2.1 |
eocBrEPPortPropEntryAn entry in the designated EP port properties table. EoCBrEPPortPropEntry .1.3.6.1.4.1.890.1.15.5.1.11.2.1.1 |
eocBrEPPortPropEPIndexDesignate EP index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.1 |
eocBrEPPortPropPIDDesignated EP port index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.2 |
eocBrEPPortPropEPMacThe designated EP device Mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.3 |
eocBrEPPortPropTypeDesignated EP port type.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.4 |
eocBrEPPortPropConfigConfigure designated EP Ethernet port properties.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.5 |
eocBrEPPortPropLinkStatusDesignated EP Ethernet port current link status.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.6 |
eocBrEPPortPropFlowCtrlConfigure designated EP Ethernet port flow control.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.7 |
eocBrEPPortPropInRateCtrlEnable/disable the maximum input(ingress) rate control for the designated EP port.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.8 |
eocBrEPPortPropInRateConfigure the maximum input(ingress) rate in 64kbps (n*64kbps)for the designated EP port.
(maximum bandwidth between 0~100Mbps)
For example, value '0' will shut it off and value '4' means
the maximum rate is '4*64k=256kbps'.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.9 |
eocBrEPPortPropOutRateCtrlEnable/disable the maximum output(egress) rate control for the designated EP port.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.10 |
eocBrEPPortPropOutRateConfigure the maximum output(egress) rate in 64kbps (n*64kbps)for the designated EP port.
(maximum bandwidth between 0~100Mbps) .
For example, value '0' will shut it off and value '4' means
the maximum rate is '4*64k=256kbps'.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.11 |
eocBrEPPortPropEnableCtrlEnable current designated EP Ethernet port or not.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.12 |
eocBrEPPortStatsTableA table that contains EP port statistics. SEQUENCE OF EoCBrEPPortStatsEntry .1.3.6.1.4.1.890.1.15.5.1.11.2.2 |
eocBrEPPortStatsEntryAn entry in the EP port statistics table. EoCBrEPPortStatsEntry .1.3.6.1.4.1.890.1.15.5.1.11.2.2.1 |
eocBrEPPortStatsEPIndexDesignate EP index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.1 |
eocBrEPPortStatsPIDDesignated EP port index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.2 |
eocBrEPPortStatsEPMacThe designated EP device Mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.3 |
eocBrEPPortStatsTypeDesignated EP port type.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.4 |
eocBrEPPortStatsRxPktsDesignated EP port statistics.ro Counter32 .1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.5 |
eocBrEPPortStatsRxBytesDesignated EP port statistics.ro Counter32 .1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.6 |
eocBrEPPortStatsTxPktsDesignated EP port statistics.ro Counter32 .1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.7 |
eocBrEPPortStatsTxBytesDesignated EP port statistics.ro Counter32 .1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.8 |
eocBrEPPortStatsCollisionsDesignated EP port statistics.ro Counter32 .1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.9 |
eocBrEPPortStatsErrorsDesignated EP port statistics.ro Counter32 .1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.10 |
eocBrEPStatsCtrlTableA table of designated EP statistics control. SEQUENCE OF EoCBrEPStatsCtrlEntry .1.3.6.1.4.1.890.1.15.5.1.11.2.3 |
eocBrEPStatsCtrlEntryAn entry in designated EP statistics control table. EoCBrEPStatsCtrlEntry .1.3.6.1.4.1.890.1.15.5.1.11.2.3.1 |
eocBrEPStatsCtrlEPIndexDesignate EP index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.2.3.1.1 |
eocBrEPStatsCtrlEPMacThe designated EP device Mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.11.2.3.1.2 |
eocBrEPStatsCtrlResetTo clear/reset designated EP statistics, the SNMP manager need to set the
value to activate(1); and submit to the bridge to clear designated EP
statistics. The value will back to idle(0) once reset has completed.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.2.3.1.3 |
eocBrEPStatsCtrlRefreshTo refresh/reload designated EP statistics, the SNMP manager need to set the
value to activate(1); and submit to the bridge to refresh designated EP
statistics. The value will back to idle(0) once completed.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.2.3.1.4 |
eocBrEPEtherQoS OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.11.3 |
eocBrEPTcpUdpPriTableA table that maps packets with specified TCP/UDP port number
to prioritized Queues for QoS in designated EP. SEQUENCE OF EoCBrEPTcpUdpPriEntry .1.3.6.1.4.1.890.1.15.5.1.11.3.2 |
eocBrEPTcpUdpPriEntryAn entry for mapping one specified TCP/UDP port number to
one prioritized Queue in designated EP. EoCBrEPTcpUdpPriEntry .1.3.6.1.4.1.890.1.15.5.1.11.3.2.1 |
eocBrEPTcpUdpEPIndexDesignate EP index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.3.2.1.1 |
eocBrEPTcpUdpRuleNumTCP/UDP port number index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.3.2.1.2 |
eocBrEPTcpUdpEPMacThe designated EP device Mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.11.3.2.1.3 |
eocBrEPTcpUdpEnableCtrlEnable TCP/UDP port priority or not.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.3.2.1.4 |
eocBrEPTcpUdpPortNumSpecify the TCP/UDP port number to be mapped.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.11.3.2.1.5 |
eocBrEPTcpUdpMappedQueueSpecify the mapped Queue for the TCP/UDP port number.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.3.2.1.6 |
eocBrEPQueueSchTableA table that maps priority queue scheduling mechanism in designated EP. SEQUENCE OF EoCBrEPQueueSchEntry .1.3.6.1.4.1.890.1.15.5.1.11.3.3 |
eocBrEPQueueSchEntryAn entry that maps priority queue scheduling mechanism in designated EP. EoCBrEPQueueSchEntry .1.3.6.1.4.1.890.1.15.5.1.11.3.3.1 |
eocBrEPQueueSchEPIndexDesignate EP index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.3.3.1.1 |
eocBrEPQueueSchEPMacThe designated EP device Mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.11.3.3.1.2 |
eocBrEPQueueSchTypeThe packets priority queue scheduling mechanism. There are 3 different
modes: 'Strict priority(SP)', 'Weighted fair queue(WFR)' and 'Mixed SP & WFR'.
SP: Packets residing in the higher priority queues transmit first.
Lower priority packets transmit once these queues are emptied.
Highest priority Q3 goes first always, follows Q2 if Q3 is empty,
then Q1 and lowest Q0.
WFR:Each queue is assigned a service weight ratio that determines how many
packets are sent from it. Weight is fixed at 8:4:2:1 for Q3:Q2:Q1:Q0.
MIX:Highest priority Q3 use SP, and other queues conform to WFR at 4:2:1 weight.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.3.3.1.3 |
eocBrEPPriSchemeTableA table of priority scheme in designated EP. SEQUENCE OF EoCBrEPPriSchemeEntry .1.3.6.1.4.1.890.1.15.5.1.11.3.4 |
eocBrEPPriSchemeEntryAn entry of priority scheme in designated EP. EoCBrEPPriSchemeEntry .1.3.6.1.4.1.890.1.15.5.1.11.3.4.1 |
eocBrEPPriSchemeEPIndexDesignate EP index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.3.4.1.1 |
eocBrEPPriSchemeEPMacThe designated EP device Mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.11.3.4.1.2 |
eocBrEPPriSchemeSelectSetup which packet field for priority queue mapping.
802.1p:Based on packet's 802.1p field for priority queue mapping.
7/6 goes to Q3 (highest priority), 5/4 to Q2, 3/2 to Q1, 1/0 to Q0(lowest priority).
IP: Based on packet's IP TOS/TC or DSCP field for priority queue mapping.
The precedence 2 bits in this field (DSCP/TOS/TC) decide the destined priority queue (Q3/Q2/Q1/Q0).
b'11 goes to Q3, b'10 to Q2, b01 to Q1, and b'00 to Q0.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.3.4.1.3 |
eocBrEPEtherIGMPSnoop OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.11.4 |
eocBrEPIGMPSnoopTableTable of designated EP Ethernet IGMP Snooping config. SEQUENCE OF EoCBrEPIGMPSnoopEntry .1.3.6.1.4.1.890.1.15.5.1.11.4.1 |
eocBrEPIGMPSnoopEntryAn entry in the designated EP Ethernet IGMP Snooping config table. EoCBrEPIGMPSnoopEntry .1.3.6.1.4.1.890.1.15.5.1.11.4.1.1 |
eocBrEPIGMPSnoopEPIndexDesignate EP index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.4.1.1.1 |
eocBrEPIGMPSnoopEPMacThe designated EP device Mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.11.4.1.1.2 |
eocBrEPIGMPSnoopEnableCtrlEnable IGMP v1/v2 Snooping or not in EP. Not support IGMP v3 Snooping.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.4.1.1.3 |
eocBrEPEtherTagVLAN OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.11.5 |
eocBrEPTagVLANCtrlTableTable of designated EP Ethernet Tag VLAN enable control. SEQUENCE OF EoCBrEPTagVLANCtrlEntry .1.3.6.1.4.1.890.1.15.5.1.11.5.1 |
eocBrEPTagVLANCtrlEntryAn entry in the designated EP Ethernet Tag VLAN enable control table. EoCBrEPTagVLANCtrlEntry .1.3.6.1.4.1.890.1.15.5.1.11.5.1.1 |
eocBrEPTagVLANEPIndexDesignate EP index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.5.1.1.1 |
eocBrEPTagVLANEPMacThe designated EP device Mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.11.5.1.1.2 |
eocBrEPTagVLANEnableCtrlEnable EP Tagged VLAN(802.1Q) or not.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.5.1.1.3 |
eocBrEPTagPortTableTable of designated EP Ethernet Tagged VLAN(802.1Q) information. SEQUENCE OF EoCBrEPTagPortEntry .1.3.6.1.4.1.890.1.15.5.1.11.5.2 |
eocBrEPTagPortEntryAn entry in the designated EP Ethernet Tagged VLAN(802.1Q) table. EoCBrEPTagPortEntry .1.3.6.1.4.1.890.1.15.5.1.11.5.2.1 |
eocBrEPTagPortEPIndexDesignate EP index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.5.2.1.1 |
eocBrEPTagPortPIDEP port index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.5.2.1.2 |
eocBrEPTagPortEPMacThe designated EP device Mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.11.5.2.1.3 |
eocBrEPTagPortTypeEP port type.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.5.2.1.4 |
eocBrEPTagPortPriorityThe default 802.1p priority value of current EP port.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.11.5.2.1.5 |
eocBrEPTagPortVIDThe default VLAN ID (VID) of current EP port.rw INTEGER .1.3.6.1.4.1.890.1.15.5.1.11.5.2.1.6 |
eocBrEPTagPortInRuleDefines the 'action' (ingress rule) on packet enters current EP port.
all(0)->accept all(untagged/tagged) pkt and tag the untagged pkt.
tag(1)->accept tagged pkt only.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.5.2.1.7 |
eocBrEPTagPortOutRuleDefines the 'action' (egress rule) on packet output from current EP port.
untag(0)-> remove tag from tagged pkt.
tag(1)-> tag all output pkt.
bypass(2)-> pass through either tagged or untagged pkt.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.5.2.1.8 |
eocBrEPCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.11.6 |
eocBrEPCtrlTableTable of designated EP 'Ethernet default configuration operation' or
'reboot operation'. SEQUENCE OF EoCBrEPCtrlEntry .1.3.6.1.4.1.890.1.15.5.1.11.6.1 |
eocBrEPCtrlEntryAn entry in the designated EP control table. EoCBrEPCtrlEntry .1.3.6.1.4.1.890.1.15.5.1.11.6.1.1 |
eocBrEPCtrlEPIndexDesignate EP index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.6.1.1.1 |
eocBrEPCtrlEPMacThe designated EP device Mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.11.6.1.1.2 |
eocBrEPCtrlEtherDefaultTo reset designated EP Ethernet configuration to factory default,
the SNMP manager need to set the value to activate(1); and submit to
the bridge to reset destined designated EP configuration.
The value will back to idle(0)once completed.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.6.1.1.3 |
eocBrEPCtrlRebootTo reboot designated EP, the SNMP manager need to
set the value to activateThenReboot(1); and submit to the bridge
to reboot destined designated EP.
The value will back to idle(0) once completed.rw Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.6.1.1.4 |
eocBrEPHostMacFilter OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.1.11.7 |
eocBrEPHostMacFilterTableTable of allowable host Mac(s) in designated EP. SEQUENCE OF EoCBrEPHostMacFilterEntry .1.3.6.1.4.1.890.1.15.5.1.11.7.1 |
eocBrEPHostMacFilterEntryAn entry for allowable host Mac in designated EP. EoCBrEPHostMacFilterEntry .1.3.6.1.4.1.890.1.15.5.1.11.7.1.1 |
eocBrEPHostMacFilterEPIndexDesignate EP index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.7.1.1.1 |
eocBrEPHostMacFilterSetNumMac filter set index.ro Integer32 .1.3.6.1.4.1.890.1.15.5.1.11.7.1.1.2 |
eocBrEPHostMacFilterEPMacThe designated EP device Mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.11.7.1.1.3 |
eocBrEPHostMacFilterEnableCtrlTell current host Mac filter set status
Host Mac filter function will be off if none Mac filter set exists.ro Enumeration .1.3.6.1.4.1.890.1.15.5.1.11.7.1.1.4 |
eocBrEPHostMacFilterHostMacSpecify the allowable host Mac. Set to null MAC(00-00-00-00-00-00) to disable current entry.
Host Mac filter function will be off if none Mac filter set exists.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.5.1.11.7.1.1.5 |
eoc350BrNotification OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.5.3 |
eocBrHttpLoginNotificationA user login to the Master by HTTP. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.1 |
eocBrHttpLogoutNotificationA user logout to Master by HTTP. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.2 |
eocBrHttpLoginAuthFailedNotificationA failed login by HTTP with invalid username/password. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.3 |
eocBrTelnetLoginNotificationA user login to the Master by TELNET. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.4 |
eocBrTelnetLogoutNotificationA user logout to Master by TELNET. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.5 |
eocBrTelnetLoginAuthFailedNotificationA failed login by TELNET with invalid username/password. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.6 |
eocBrSystemFwUpgradeNotificationUpgrade system firmware. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.11 |
eocBrDhcpClientAckNotificationMaster gets IP by DHCP client. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.21 |
eocBrHostDhcpClientAckNotificationHost@EP gets IP via DHCP. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.23 |
eocBrAutoConfigTFTPGetOkNotificationUpload file to Master by TFTP for Auto Configuration, success. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.27 |
eocBrAutoConfigTFTPGetErrorNotificationUpload/Parse file error to Master by TFTP for Auto Configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.28 |
eocBrHTTPGetNotificationUpload file to Master by HTTP. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.51 |
eocBrMasterDrvUpgradeNotificationUpgrade EoC Master driver. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.71 |
eocBrEPDrvUpgradeNotificationUpgrade EoC EP driver. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.81 |
eocBrEPOnlineStatusNotificationEP on-line status changed. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.82 |
eocBrEPDiagResultNotificationEP diagnosis report. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.83 |
eocBrTFTPGetOkNotificationUpload file to Master by TFTP, success. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.91 |
eocBrTFTPGetErrorNotificationUpload file to Master by TFTP, failed. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.15.5.3.92 |