ZXR10-QOS-MIB
This MIB Module provides Textual Conventions and OBJECT-ID Objects to be used by zxros qos module.
Main OID:
zxr10qos.1.3.6.1.4.1.3902.3.101.6
156
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
156 total| Object Name |
|---|
zte OBJECT IDENTIFIER .1.3.6.1.4.1.3902 |
zxr10 OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3 |
zxr10protocol OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3.101 |
zxr10qosThis MIB Module provides Textual Conventions
and OBJECT-ID Objects to be used by zxros qos module. MODULE-IDENTITY .1.3.6.1.4.1.3902.3.101.6 |
qosModuleStartThis object indicates if the qos module start or not. 1 start,0 not start.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.1 |
qosPQconfig OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3.101.6.2 |
qosPriorityQueueCfgTableThe description of zxr10 qos priority queue configuration.
It is a list of qos priority queue entries. SEQUENCE OF QosPriorityQueueCfgEntry .1.3.6.1.4.1.3902.3.101.6.2.1 |
qosPriorityQueueCfgEntryA qos priority queue entry containing objects that
qos priority queue configuration,such as:
queue item num, queue limit etc. QosPriorityQueueCfgEntry .1.3.6.1.4.1.3902.3.101.6.2.1.1 |
qosPriorityQueueIndexThe qos priority queue index.ro INTEGER .1.3.6.1.4.1.3902.3.101.6.2.1.1.1 |
qosPriorityQueueItemTotalThe configurated qos priority queue item total,the max number is 255.ro INTEGER .1.3.6.1.4.1.3902.3.101.6.2.1.1.2 |
qosPriorityQueueDefaultThe qos priority default queue number.rw QosPQQueueType .1.3.6.1.4.1.3902.3.101.6.2.1.1.3 |
qosPriorityQueueLimitHighThe qos priority queue limit high value.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.2.1.1.4 |
qosPriorityQueueLimitMediumThe qos priority queue limit medium value.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.2.1.1.5 |
qosPriorityQueueLimitNormalThe qos priority queue limit normal value.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.2.1.1.6 |
qosPriorityQueueLimitLowThe qos priority queue limit low value.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.2.1.1.7 |
qosPriorityQueueRowStatusThe qos priority queue status.rw EntryStatus .1.3.6.1.4.1.3902.3.101.6.2.1.1.8 |
qosPriorityQueueCfgTableLastchangeThe last time of the qos priority queue table changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3902.3.101.6.2.2 |
qosPriorityQueueItemTableThe description of zxr10 qos priority queue configuration.
It is a list of qos priority queue entries. SEQUENCE OF QosPriorityQueueItemEntry .1.3.6.1.4.1.3902.3.101.6.2.3 |
qosPriorityQueueItemEntryA qos priority queue entry containing objects that
qos priority queue configuration,such as:
set type, queue num, default queue limit etc. QosPriorityQueueItemEntry .1.3.6.1.4.1.3902.3.101.6.2.3.1 |
qosPriorityQueueItemIndexThe qos priority queue item index.ro INTEGER .1.3.6.1.4.1.3902.3.101.6.2.3.1.1 |
qosPriorityQueueItemMatchTypeThe qos priority queue match type such as mpls-exp,interface etc.rw QosPQMatchType .1.3.6.1.4.1.3902.3.101.6.2.3.1.2 |
qosPriorityQueueItemMatchValueThe qos priority queue match value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.2.3.1.3 |
qosPriorityQueueItemQueueNumThe qos priority queue num.rw QosPQQueueType .1.3.6.1.4.1.3902.3.101.6.2.3.1.4 |
qosPriorityQueueItemRowStatusThe qos priority queue item row status.rw EntryStatus .1.3.6.1.4.1.3902.3.101.6.2.3.1.5 |
qosPriorityQueueItemDescriptionThe qos priority description.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.2.3.1.6 |
qosPriorityGroupTableThis table describes the interface and
the PriorityQueue that are attached to it SEQUENCE OF QosPriorityGroupEntry .1.3.6.1.4.1.3902.3.101.6.2.4 |
qosPriorityGroupEntryEach entry in this table describes to which a
interface a given PriorityQueue is attached QosPriorityGroupEntry .1.3.6.1.4.1.3902.3.101.6.2.4.1 |
qosPriorityGroupifnameThe name of the interface which the priority queue attached.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.2.4.1.1 |
qosPriorityGroupNumThe Num of the priority-group which is attached to the interfacerw INTEGER .1.3.6.1.4.1.3902.3.101.6.2.4.1.2 |
qosPriorityGroupRowStatusThe row status of the priority group attached to the interfacerw EntryStatus .1.3.6.1.4.1.3902.3.101.6.2.4.1.3 |
qosCQconfig OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3.101.6.3 |
qosCBQconfig OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3.101.6.4 |
qosCBQosServicePolicyTableThis table describes the interface and
the policymap that are attached to it SEQUENCE OF QosCbQosServicePolicyEntry .1.3.6.1.4.1.3902.3.101.6.4.1 |
qosCBQosServicePolicyEntryEach entry in this table describes to which a
interface a given policymap is attached QosCbQosServicePolicyEntry .1.3.6.1.4.1.3902.3.101.6.4.1.1 |
qosCbQosPolicyifnameThe name of the interface which the service policy attachedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.4.1.1.1 |
qosCbQosPolicyDirectionThis indicates the direction of traffic
for which this service policy is appliedrw TrafficDirection .1.3.6.1.4.1.3902.3.101.6.4.1.1.2 |
qosCbQosServicePolicyNameName of the service policy which is attached to the interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.4.1.1.3 |
qosCbQosServicePolicyRowStatusThe qos service policy row status.rw EntryStatus .1.3.6.1.4.1.3902.3.101.6.4.1.1.4 |
qosCbQosPolicyMapCfgTableThis table specifies Policymap configuration information SEQUENCE OF QosCbQosPolicyMapCfgEntry .1.3.6.1.4.1.3902.3.101.6.4.2 |
qosCbQosPolicyMapCfgEntryEach entry in this table describes configuration
information about a policymap. QosCbQosPolicyMapCfgEntry .1.3.6.1.4.1.3902.3.101.6.4.2.1 |
qoscbQosPMapIndexAn index assigned by system for each policy map.ro INTEGER .1.3.6.1.4.1.3902.3.101.6.4.2.1.1 |
qoscbQosPolicyMapNameName of the policymap.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.4.2.1.2 |
qosCbQosPolicyMapRowStatusThe policymap row status.rw EntryStatus .1.3.6.1.4.1.3902.3.101.6.4.2.1.3 |
qoscbQosPolicyMapDescriptionDescription of the policymap.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.4.2.1.4 |
qosCbQosClassMapCfgTableThis table specifies ClassMap configuration information SEQUENCE OF QosCbQosClassMapCfgEntry .1.3.6.1.4.1.3902.3.101.6.4.3 |
qosCbQosClassMapCfgEntryEach entry in this table describes configuration
information about a classmap QosCbQosClassMapCfgEntry .1.3.6.1.4.1.3902.3.101.6.4.3.1 |
qoscbQosCMapIndexAn index assigned by system for each class mapro INTEGER .1.3.6.1.4.1.3902.3.101.6.4.3.1.1 |
qosCbQosClassMapNameName of the Classmap.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.4.3.1.2 |
qosCbQosClassMapRowStatusThe classMap row status.rw EntryStatus .1.3.6.1.4.1.3902.3.101.6.4.3.1.3 |
qoscbQosClassMapDescriptionDescription of the Classmap.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.4.3.1.4 |
qosCbQosCMAPMatchCfgTableThis table specifies ClassMap configuration information SEQUENCE OF QosCbQosCMAPMatchCfgEntry .1.3.6.1.4.1.3902.3.101.6.4.4 |
qosCbQosCMAPMatchCfgEntryEach entry in this table describes configuration information
about a Match Statement QosCbQosCMAPMatchCfgEntry .1.3.6.1.4.1.3902.3.101.6.4.4.1 |
qosCbQosCMAPMatchIndexAn index assigned by system for each Match Statementrw INTEGER .1.3.6.1.4.1.3902.3.101.6.4.4.1.1 |
qosCbQosCMAPMatchTypeName of the Match Statementrw QosCMAPMatchType .1.3.6.1.4.1.3902.3.101.6.4.4.1.2 |
qosCbQosCMAPMatchValueName of the Match Statementrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.4.4.1.3 |
qosCbQosCMAPMatchRowStatusThe qos classMap match statment row statusrw EntryStatus .1.3.6.1.4.1.3902.3.101.6.4.4.1.4 |
qosCbQosPolicyClassCfgTableThis table specifies policy class information SEQUENCE OF QosCbQosPolicyClassCfgEntry .1.3.6.1.4.1.3902.3.101.6.4.5 |
qosCbQosPolicyClassCfgEntryEach entry in this table describes a policy class QosCbQosPolicyClassCfgEntry .1.3.6.1.4.1.3902.3.101.6.4.5.1 |
qosCbQosPolicyClassNameName of the policy class.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.4.5.1.1 |
qosCbQosPolicyClassRowStatusThe policy class row status.rw EntryStatus .1.3.6.1.4.1.3902.3.101.6.4.5.1.2 |
qosCbQosqueueCfgTableThis table specifies policy-class queue
configuration information SEQUENCE OF QosCbQosqueueCfgEntry .1.3.6.1.4.1.3902.3.101.6.4.6 |
qosCbQosqueueCfgEntryEach entry in this table describes configuration
information about a policy-map queue. QosCbQosqueueCfgEntry .1.3.6.1.4.1.3902.3.101.6.4.6.1 |
qosCbQosQueueingCfgPriorityQueueNoIf the traffic is specified to LLQ,the value is the queue number,
else is NULLrw QosPQQueueType .1.3.6.1.4.1.3902.3.101.6.4.6.1.1 |
qosCbQosqueueRowStatusThe qos cbwfq action row status.rw EntryStatus .1.3.6.1.4.1.3902.3.101.6.4.6.1.2 |
qosCbQosbandwidthCfgTableThis table specifies policy-class bandwidth
configuration information SEQUENCE OF QosCbQosbandwidthCfgEntry .1.3.6.1.4.1.3902.3.101.6.4.7 |
qosCbQosbindwidthCfgEntryEach entry in this table describes configuration
information about a policy-map bandwidth. QosCbQosbandwidthCfgEntry .1.3.6.1.4.1.3902.3.101.6.4.7.1 |
qosCbQosQueueingCfgBandwidthThe configured bandwidth allocated to
this traffic class.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.4.7.1.1 |
qosCbQosQueueingCfgBandwidthUnitsUnits of the accompanying bandwidth parameterrw QueueingBandwidthUnits .1.3.6.1.4.1.3902.3.101.6.4.7.1.2 |
qosCbQosActionRowStatusThe qos cbwfq action row status.rw EntryStatus .1.3.6.1.4.1.3902.3.101.6.4.7.1.3 |
qosCbQosPoliceCfgTableThis table specifies Police Action configuration
information. SEQUENCE OF QosCbQosPoliceCfgEntry .1.3.6.1.4.1.3902.3.101.6.4.8 |
qosCbQosPoliceCfgEntryEach entry in this table describes configuration information
about a Police Action. The table holds Policy
configuration parameters, such as rate, burst size, and
actions based on traffic rates QosCbQosPoliceCfgEntry .1.3.6.1.4.1.3902.3.101.6.4.8.1 |
qosCbQosPoliceCfgCirThe committed policing cir. This is the sustained
rate permitted by policing.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.4.8.1.1 |
qosCbQosPoliceCfgBurstSizeThe burst size ,in bytes,of a traffic.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.4.8.1.2 |
qosCbQosPoliceCfgPirThe committed policing cir. This is the peek
rate permitted by policing.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.4.8.1.3 |
qosCbQosPoliceCfgExtBurstSizeThe Max burst size ,in bytes,of a traffic.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.4.8.1.4 |
qosCbQosPoliceCfgConformActionAction to be taken when the traffic is within the
configured rate, that is, the traffic rate is conforming.rw QosCBQCarAction .1.3.6.1.4.1.3902.3.101.6.4.8.1.5 |
qosCbQosPoliceCfgConformSetValueNew packet attribute values for each packets that
conforms to the configured Police rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.4.8.1.6 |
qosCbQosPoliceCfgExceedActionAction to be taken when the traffic is exceeds the
configured rate, that is, the traffic rate is non-conforming.rw QosCBQCarAction .1.3.6.1.4.1.3902.3.101.6.4.8.1.7 |
qosCbQosPoliceCfgExceedSetValueNew packet attribute values for each packets that
conforms to the configured Police rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.4.8.1.8 |
qosCbQosPoliceCfgViolateActionAction to be taken when the traffic is exceeds the
peek rate, that is, the traffic rate is non-conforming.rw QosCBQCarAction .1.3.6.1.4.1.3902.3.101.6.4.8.1.9 |
qosCbQosPoliceCfgViolateSetValueNew packet attribute values for each packets that
conforms to the peek Police rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.4.8.1.10 |
qosCbQosPoliceCfgRowStatusThe row status qos cbwfq police configration.rw EntryStatus .1.3.6.1.4.1.3902.3.101.6.4.8.1.11 |
qosWREDconfig OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3.101.6.5 |
qosWREDprecedenceCfgTableThis table specifies wred precedence configuration
information. SEQUENCE OF QosWREDprecedenceCfgEntry .1.3.6.1.4.1.3902.3.101.6.5.1 |
qosWREDprecedenceCfgEntryEach entry in this table describes configuration
information about a wred policy. QosWREDprecedenceCfgEntry .1.3.6.1.4.1.3902.3.101.6.5.1.1 |
qosREDCfgPreValueThe IP precedence of this entry.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.5.1.1.1 |
qosREDprecedenceCfgMinThresholdMinimum threshold in number of packets. When the
average queue length reaches this number, WRED begins
to drop packets with the specified IP precedence.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.5.1.1.2 |
qosREDprecedenceCfgMaxThresholdMaximum threshold in number of packets. When the
average queue length exceeds this number, WRED drops
all packets with the specified IP precedence.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.5.1.1.3 |
qosREDprecedenceCfgPktDropProbDenominator for the fraction of packets dropped when
the average queue depth is MaxDepthThreshold. For
example, if the denominator is 10, one out of every 10
packets is dropped when the average queue is at the
MaxDepthThreshold.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.5.1.1.4 |
qosREDCfgprecedenceRowStatusThe row status of qos wred configration.rw EntryStatus .1.3.6.1.4.1.3902.3.101.6.5.1.1.5 |
qosWREDweightCfgTableThis table specifies wred weight configuration
information. SEQUENCE OF QosWREDweightCfgEntry .1.3.6.1.4.1.3902.3.101.6.5.2 |
qosWREDweightCfgEntryEach entry in this table describes configuration
information about a wred weight policy. QosWREDweightCfgEntry .1.3.6.1.4.1.3902.3.101.6.5.2.1 |
qosREDCfgweightValueThe decay factor for the queue average calculation.
The decay factor is equal to raising 2 to the power
of N, where N could be up to 16.
The smaller the number, the faster it decays.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.5.2.1.1 |
qosREDCfgweightRowStatusThe row status of qos wred weight configration.rw EntryStatus .1.3.6.1.4.1.3902.3.101.6.5.2.1.2 |
qosWFQconfig OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3.101.6.6 |
qosWFQCfgTableThis table specifies WFQ configuration
information. SEQUENCE OF QosWFQCfgEntry .1.3.6.1.4.1.3902.3.101.6.6.1 |
qosWFQCfgEntryEach entry in this table describes configuration
information about a wfq policy. QosWFQCfgEntry .1.3.6.1.4.1.3902.3.101.6.6.1.1 |
qosWFQCfgTotalQueueNumTotal queue number used for wfq in the interface.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.6.1.1.1 |
qosWFQCfgQueueLimitThe discard threshold for each queue.rw INTEGER .1.3.6.1.4.1.3902.3.101.6.6.1.1.2 |
qosWFQCfgRowStatusThe row status of qos wfq configration.rw EntryStatus .1.3.6.1.4.1.3902.3.101.6.6.1.1.3 |
qosCARconfig OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3.101.6.7 |
qosFreeCirIndexThe first free cir item index.When a new cir item is created it is used to find a space to save the
cir item configration;When deleted its value equals to the index of the cir item deleted,
so when a new cir item is created the space can be used again.ro INTEGER .1.3.6.1.4.1.3902.3.101.6.7.1 |
qosInputCirIfTableThe description of zxr10 qos interface input rate-limit configuration.
It is a list of qos interface cir entries. SEQUENCE OF QosInputCirIfEntry .1.3.6.1.4.1.3902.3.101.6.7.2 |
qosInputCirIfEntryA qos cir interface entry containing objects that
qos cir interface infomation,such as:
rate-limit match type, commit rate, burst rate, confirm action etc. QosInputCirIfEntry .1.3.6.1.4.1.3902.3.101.6.7.2.1 |
qosInputCirIndexThe qos interface cir config index.ro INTEGER .1.3.6.1.4.1.3902.3.101.6.7.2.1.1 |
qosInputCirMatchTypeThe qos interface cir match type.rw QosCirMatchType .1.3.6.1.4.1.3902.3.101.6.7.2.1.2 |
qosInputCirMatchValueThe qos interface cir match value, for localport, it is 0.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.7.2.1.3 |
qosInputCirCirThe qos interface commit rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.7.2.1.4 |
qosInputCirNormalBurstRateThe qos interface cir normal burst rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.7.2.1.5 |
qosInputCirPirThe qos interface peek rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.7.2.1.6 |
qosInputCirMaxBurstRateThe qos interface cir max burst rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.7.2.1.7 |
qosInputCirConformActionThe qos interface cir confirm action.rw QosCirAction .1.3.6.1.4.1.3902.3.101.6.7.2.1.8 |
qosInputCirConformValueNew packet attribute values for each packets that
conforms to the configured commit rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.7.2.1.9 |
qosInputCirExceedActionThe qos interface cir exceed action.rw QosCirAction .1.3.6.1.4.1.3902.3.101.6.7.2.1.10 |
qosInputCirExceedValueNew packet attribute values for each packets that
exceeds to the configured commit rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.7.2.1.11 |
qosInputCirViolateActionThe qos interface cir violate action.rw QosCirAction .1.3.6.1.4.1.3902.3.101.6.7.2.1.12 |
qosInputCirViolateValueNew packet attribute values for each packets that
exceeds to the configured exceed rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.7.2.1.13 |
qosInputCirRowStatusThe qos interface cir item row status. if it is in valid status, it only
can change to invalid status, no other status.rw EntryStatus .1.3.6.1.4.1.3902.3.101.6.7.2.1.14 |
qosInputCirDescriptionThe qos interface cir description.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.7.2.1.15 |
qosInputCirIfTableLastchangeThe last time of the qos interface input cir table changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3902.3.101.6.7.3 |
qosOutputCirIfTableThe description of zxr10 qos interface output rate-limit configuration.
It is a list of qos interface cir entries. SEQUENCE OF QosOutputCirIfEntry .1.3.6.1.4.1.3902.3.101.6.7.4 |
qosOutputCirIfEntryA qos cir interface entry containing objects that
qos cir interface infomation,such as:
rate-limit match type, commit rate, burst rate, confirm action etc. QosOutputCirIfEntry .1.3.6.1.4.1.3902.3.101.6.7.4.1 |
qosOutputCirIndexThe qos interface cir config index.ro INTEGER .1.3.6.1.4.1.3902.3.101.6.7.4.1.1 |
qosOutputCirMatchTypeThe qos interface cir match type.rw QosCirMatchType .1.3.6.1.4.1.3902.3.101.6.7.4.1.2 |
qosOutputCirMatchValueThe qos interface cir match value, for localport, it is 0.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.7.4.1.3 |
qosOutputCirCirThe qos interface commit rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.7.4.1.4 |
qosOutputCirNormalBurstRateThe qos interface cir normal burst rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.7.4.1.5 |
qosOutputCirPirThe qos interface peek rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.7.4.1.6 |
qosOutputCirMaxBurstRateThe qos interface cir max burst rate, it must not be lower than normal burst rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.7.4.1.7 |
qosOutputCirConformActionThe qos interface cir conform action.rw QosCirAction .1.3.6.1.4.1.3902.3.101.6.7.4.1.8 |
qosOutputCirConformValueNew packet attribute values for each packets that
conforms to the configured commit rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.7.4.1.9 |
qosOutputCirExceedActionThe qos interface cir exceed action.rw QosCirAction .1.3.6.1.4.1.3902.3.101.6.7.4.1.10 |
qosOutputCirExceedValueNew packet attribute values for each packets that
exceeds to the configured commit rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.7.4.1.11 |
qosOutputCirViolateActionThe qos interface cir exceed action.rw QosCirAction .1.3.6.1.4.1.3902.3.101.6.7.4.1.12 |
qosOutputCirViolateValueNew packet attribute values for each packets that
exceeds to the configured commit rate.rw Gauge .1.3.6.1.4.1.3902.3.101.6.7.4.1.13 |
qosOutputCirRowStatusThe qos interface cir item row status. if it is in valid status, it only
can change to invalid status, no other status.rw EntryStatus .1.3.6.1.4.1.3902.3.101.6.7.4.1.14 |
qosOutputCirDescriptionThe qos interface cir description.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.7.4.1.15 |
qosOutputCirIfTableLastchangeThe last time of the qos interface Output cir table changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3902.3.101.6.7.5 |
qosIntfCarStat OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3.101.6.8 |
qosIfTraffStatInfoTableDisplay the traffic and the utilization of the interface after rate-limit policy.
It is a list of qos interface car stat entries. SEQUENCE OF QosIfTraffStatInfoEntry .1.3.6.1.4.1.3902.3.101.6.8.1 |
qosIfTraffStatInfoEntryDisplay the traffic and the utilization of the interface after rate-limit policy. QosIfTraffStatInfoEntry .1.3.6.1.4.1.3902.3.101.6.8.1.1 |
qosIntfNameThe name of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.8.1.1.1 |
qosIntfInUtilizationThe utilization of the in interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.8.1.1.2 |
qosIntfInCarTotalPacketsThe total packets of the in interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.8.1.1.3 |
qosIntfInCarTranPacketsThe transmit packets of the in interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.8.1.1.4 |
qosIntfInCarDropPacketsThe drop packets of the in interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.8.1.1.5 |
qosIntfInCarTotalBytesThe total bytes of the in interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.8.1.1.6 |
qosIntfInCarTranBytesThe transmit bytes of the in interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.8.1.1.7 |
qosIntfInCarDropBytesThe drop bytes of the in interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.8.1.1.8 |
qosIntfOutUtilizationThe utilization of the out interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.8.1.1.9 |
qosIntfOutCarTotalPacketsThe total packets of the out interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.8.1.1.10 |
qosIntfOutCarTranPacketsThe transmit packets of the out interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.8.1.1.11 |
qosIntfOutCarDropPacketsThe drop packets of the out interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.8.1.1.12 |
qosIntfOutCarTotalBytesThe total bytes of the out interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.8.1.1.13 |
qosIntfOutCarTranBytesThe transmit bytes of the out interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.8.1.1.14 |
qosIntfOutCarDropBytesThe drop bytes of the out interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.101.6.8.1.1.15 |