ZTE-AN-SOFTWARE-MIB
AI MIB Summary
The ZTE-AN-SOFTWARE-MIB module enables SNMP-based monitoring and management of software versions, patch levels, and installation states within ZTE Access Node hardware. It facilitates the tracking of critical software lifecycle metrics, including active firmware images, upgrade status, and system component integrity across the access network infrastructure.
This MIB defines zte Access Node software management.
Main OID:
zxAnSoftwareMib.1.3.6.1.4.1.3902.1082.20.30
170
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
170 total| Object Name |
|---|
zxAnSoftwareMibThis MIB defines zte Access Node software management. MODULE-IDENTITY .1.3.6.1.4.1.3902.1082.20.30 |
zxAnSwObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.2 |
zxAnCardSwObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.2.2 |
zxAnSwCardRunningVerTableThis table includes the card version information. SEQUENCE OF ZxAnSwCardRunningVerEntry .1.3.6.1.4.1.3902.1082.20.30.2.2.2 |
zxAnSwCardRunningVerEntryAn entry in zxAnCardTable. ZxAnSwCardRunningVerEntry .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1 |
zxAnSwCardRackThe rack number Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.1 |
zxAnSwCardShelfThe shelf number Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.2 |
zxAnSwCardSlotThe slot number Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.3 |
zxAnSwCardFileNameThe version file name of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.5 |
zxAnSwCardFileTypeThe version file type of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.6 |
zxAnSwCardVersionThe version tag of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.7 |
zxAnSwCardFileLenThe version file length of the card.ro Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.8 |
zxAnSwCardBuildTimeThe time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.9 |
zxAnSwCardBootwareFileNameThe bootrom file name of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.10 |
zxAnSwCardBootwareFileTypeThe bootrom file type of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.11 |
zxAnSwCardBootwareVersionThe bootrom tag of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.12 |
zxAnSwCardBootwareFileLenThe bootrom file length of the card.ro Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.13 |
zxAnSwCardBootwareBuildTimeThe time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.14 |
zxAnSwCardFirmware1FileNameThe firmware file name of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.15 |
zxAnSwCardFirmware1FileTypeThe firmware file type of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.16 |
zxAnSwCardFirmware1VersionThe firmware tag of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.17 |
zxAnSwCardFirmware1FileLenThe firmware file length of the card.ro Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.18 |
zxAnSwCardFirmware1BuildTimeThe time version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.19 |
zxAnSwCardFirmware2FileNameThe firmware file name of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.20 |
zxAnSwCardFirmware2FileTypeThe firmware file type of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.21 |
zxAnSwCardFirmware2VersionThe firmware tag of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.22 |
zxAnSwCardFirmware2FileLenThe firmware file length of the card.ro Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.23 |
zxAnSwCardFirmware2BuildTimeThe time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.24 |
zxAnSwCardFirmware3FileNameThe firmware file name of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.25 |
zxAnSwCardFirmware3FileTypeThe firmware file type of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.26 |
zxAnSwCardFirmware3VersionThe firmware tag of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.27 |
zxAnSwCardFirmware3FileLenThe firmware file length of the card.ro Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.28 |
zxAnSwCardFirmware3BuildTimeThe time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.29 |
zxAnSwSubcardRunningVerTableThis table includes the sub card version information. SEQUENCE OF ZxAnSwSubcardRunningVerEntry .1.3.6.1.4.1.3902.1082.20.30.2.2.3 |
zxAnSwSubcardRunningVerEntryAn entry in zxAnSwSubcardRunningVerTable. ZxAnSwSubcardRunningVerEntry .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1 |
zxAnSwSubcardSlotThe slot number of the subcard Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.1 |
zxAnSwSubcardFileNameThe version file name of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.3 |
zxAnSwSubcardFileTypeThe version file type of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.4 |
zxAnSwSubcardVersionThe version tag of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.5 |
zxAnSwSubcardFileLenThe version file length of the card.ro Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.6 |
zxAnSwSubcardBuildTimeThe time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.7 |
zxAnSwSubcardBootwareFileNameThe bootrom file name of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.8 |
zxAnSwSubcardBootwareFileTypeThe bootrom file type of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.9 |
zxAnSwSubcardBootwareVersionThe bootrom tag of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.10 |
zxAnSwSubcardBootwareFileLenThe bootrom file length of the card.ro Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.11 |
zxAnSwSubcardBootwareBuildTimeThe time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.12 |
zxAnSwSubcardFirmwareFileNameThe firmware file name of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.13 |
zxAnSwSubcardFirmwareFileTypeThe firmware file type of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.14 |
zxAnSwSubcardFirmwareVersionThe firmware tag of the card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.15 |
zxAnSwSubcardFirmwareFileLenThe firmware file length of the card.ro Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.16 |
zxAnSwSubcardFirmwareBuildTimeThe time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.17 |
zxAnSwImageTableThis table includes the saved version information in version area MP. SEQUENCE OF ZxAnSwImageEntry .1.3.6.1.4.1.3902.1082.20.30.2.2.4 |
zxAnSwImageEntryAn entry in zxAnSwImageTable. ZxAnSwImageEntry .1.3.6.1.4.1.3902.1082.20.30.2.2.4.1 |
zxAnSwImageFileName DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.4.1.1 |
zxAnSwImageFileTypeThe version file type on the saved area.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.4.1.2 |
zxAnSwImageVersionThe version tag on the saved area.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.2.4.1.3 |
zxAnSwImageFileLenThe version file length on the saved area.ro Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.2.4.1.4 |
zxAnSwImageBuildTimeThe time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.2.4.1.5 |
zxAnSwImageActiveStatusThe status of saved MP version on the saved area. active(1): active MP version. inactive(2): inactive MP version. none(3): NP version, don't have active attribute.ro Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.2.4.1.6 |
zxAnSwImageDownloadTimeThe downloading time of the version file.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.2.4.1.7 |
zxAnSwUpdateObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.2.3 |
zxAnSwManualUpdateObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.2.3.2 |
zxAnSwManualUpdateGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.2.3.2.1 |
zxAnSwManualUpdateRackThe rack number. The multi-variables binding rule should be complied with when a manager manual updates software. According to this rule,all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To manual update software, the mandatory and optional variables are as follows: mandatoty: zxAnSwManualUpdateRack, zxAnSwManualUpdateShelf, zxAnSwManualUpdateSlotList, zxAnSwManualUpdateSwType optional : none To manual update subcard software, the mandatory and optional variables are as follows: mandatoty: zxAnSwManualUpdateRack, zxAnSwManualUpdateShelf, zxAnSwManualUpdateSlotList, zxAnSwManualUpdateSwType, zxAnSwManualUpdateSubcardList optional : nonerw Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.3.2.1.1 |
zxAnSwManualUpdateShelfThe shelf number. This variable must comply with the multi-variables binding rule described in zxAnSwManualUpdateRack.rw Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.3.2.1.2 |
zxAnSwManualUpdateSlotListThe slot number. updating version file from MP to NP. They can be updated in batch. For example: '1,2,3' This variable must comply with the multi-variables binding rule described in zxAnSwManualUpdateRack.rw DisplayString .1.3.6.1.4.1.3902.1082.20.30.2.3.2.1.3 |
zxAnSwManualUpdateSwTypeThe software type is special to update. This variable must comply with the multi-variables binding rule described in zxAnSwManualUpdateRack. bootware(1): update bootware.rw Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.3.2.1.4 |
zxAnSwManualUpdateSubcardListThe subcard number. updating version file from MP to subcard. They can be updated in batch. For example: '1,2,3' This variable must comply with the multi-variables binding rule described in zxAnSwManualUpdateRack. If zxAnSwManualUpdateSlotList is '1,2' and zxAnSwManualUpdateSubcardList is '3,4', the actual operation object like 'slot.subcard' is '1.3', '1.4', '2.3', '2.4'.rw DisplayString .1.3.6.1.4.1.3902.1082.20.30.2.3.2.1.5 |
zxAnSwManualUpdateStatusTableThis table includes the version updating status information. SEQUENCE OF ZxAnSwManualUpdateStatusEntry .1.3.6.1.4.1.3902.1082.20.30.2.3.2.5 |
zxAnSwManualUpdateStatusEntryAn entry in zxAnSwManualUpdateStatusTable. ZxAnSwManualUpdateStatusEntry .1.3.6.1.4.1.3902.1082.20.30.2.3.2.5.1 |
zxAnSwManualUpdateSoftwareTypeThe software type when updating version. Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.3.2.5.1.1 |
zxAnSwManualUpdateStatusThe version status when updating version. negotiating(1):negotiating not starting downloading(2):updating from MP failed(3): update failed success(4): update successly sameVersion(5):not need updatero Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.3.2.5.1.2 |
zxAnSwManualFailedReasonThe reason when updating version failed.ro Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.3.2.5.1.3 |
zxAnSwSubcardMUpdateStatusTableThis table includes the subcard software updating status information. SEQUENCE OF ZxAnSwSubcardMUpdateStatusEntry .1.3.6.1.4.1.3902.1082.20.30.2.3.2.6 |
zxAnSwSubcardMUpdateStatusEntryAn entry in zxAnSwSubcardMUpdateStatusTable. ZxAnSwSubcardMUpdateStatusEntry .1.3.6.1.4.1.3902.1082.20.30.2.3.2.6.1 |
zxAnSwSubcardMUpdateSoftwareTypeThe software type when updating subcard software. bootware(1): update bootware. Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.3.2.6.1.1 |
zxAnSwSubcardMUpdateStatusThe updating status when updating subcard software. negotiating(1): negotiating not starting. downloading(2): updating from MP. failed(3): update failed. success(4): update successfully. sameVersion(5): not need to update.ro Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.3.2.6.1.2 |
zxAnSwSubcardMUpdateFailedReasonThe reason when updating subcard software failed. noError(1): no error. noSupportCardHwVersion(2): control card doesn't support the current card hardware version. mismatchCardHwVersion(3): control card's configuration and the current card hardware version are mismatch. mismatchCardConfData(4): control card's configuration and the current card configuration data are mismatch. noSwInNe(5): software for this card doesn't exist in control card. cardUpdateSwFailed(6): the current card software update failed.ro Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.3.2.6.1.3 |
zxAnSwAutoUpdateObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.2.3.3 |
zxAnSwAutoUpdateGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1 |
zxAnSwAutoUpdateChkObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1 |
zxAnSwAutoUpdateChkEnableEnable or disable the software periodic check function. The multi-variables binding rule should be complied with when a software periodic check. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To configure software periodic check(except disable software periodic check function), the mandatory and optional variables are as follows: mandatoty: zxAnSwAutoUpdateChkEnable, zxAnSwAutoUpdateChkStartTime, zxAnSwAutoUpdateChkInterval optional : nonerw Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.1 |
zxAnSwAutoUpdateChkStartTimeThe start time of software periodic check. For example:yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33). This variable must comply with the multi-variables binding rule described in zxAnSwAutoUpdateChkEnable.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.2 |
zxAnSwAutoUpdateChkIntervalThe interval of software periodic check. Value 0 means unconfigured. Unit is hour. This variable must comply with the multi-variables binding rule described in zxAnSwAutoUpdateChkEnable.rw Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.3 |
zxAnSwAutoUpdateCurrChkStartTimeThe start time of current software periodic check. For example:yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.20 |
zxAnSwAutoUpdateChkDifferFilesThe different files name between NE and file server. File name is separated by ',', For example:xxx,xxx,xxx.ro DisplayString .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.21 |
zxAnSwAutoUpdateChkStatusThe status of software periodic check. notStarted(1): Automatic update check not start inProgress(2): Automatic update check in progress success(3): Automatic update check successful failed(4): Automatic update check failedro Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.22 |
zxAnSwAutoUpdateChkFailedReasonThe failed reason of software periodic check. noError(1): Automatic update check successful or not start fileServerUnconfigured(2): Automatic update file server is not configure fileServerConnectFailed(3): File server connect failed fileServerLoginFailed(4): File server configure is not correct fileServerPathError(5): File server configure path is not correct fileServerProtocolTypeError(6): File server configure protocol type is not correct deviceCheckFailed(7): NE flash error otherErrors(255): Error is not include above listro Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.23 |
zxAnSwAutoUpdateOperObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2 |
zxAnSwAutoUpdateActionThe automatic update action. It means to start the automatic update progress.rw Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.1 |
zxAnSwAutoUpdateActiveEnableEnable or disable the software active function. Active means to reset card except control card.rw Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.2 |
zxAnSwAutoUpdateSwBackupEnableEnable or disable the version file backup function.rw Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.3 |
zxAnSwAutoUpdateStatusThe status of automatic update. notStarted(1): Not start updateStarting(2): Update Start backingUpFile(3): Backup software before update versionFileAnalyzing(4): Software analyzing versionFileDownloading(5): Software downloading versionFileDownloadComplete(6):Software download completed masterSlaveSynchronizing(7): Synchronize software to slave board masterSlaveSyncComplete(8): Synchronize software completed versionFileLoading(9): Load software to card bootUpdating(10): Update bootrom bootUpdateComplete(11): Update bootrom completed updateSuccess(12): Update successful readyToReboot(13): Update had beed finished,ready to reboot sameVersion(14): Update is not need for same version updateFailed(255): Update failedro Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.20 |
zxAnSwAutoUpdateCurrFileNameThe name of current file which is updated.ro DisplayString .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.21 |
zxAnSwAutoUpdateCurrFileSizeThe size of current file which is updated.ro Integer32 UNITS "bytes" .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.22 |
zxAnSwAutoUpdateCurrFileProgressThe updating progress of current file.ro Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.23 |
zxAnSwAutoUpdateTotalFilesTotal count of files will be updated.ro Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.24 |
zxAnSwAutoUpdateSuccessFilesCount of files which are updated successfully.ro Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.25 |
zxAnSwAutoUpdateFailedReasonThe failed reason of automatic update. noError(1), Update is not start or successful backupDataError(2), Backup data failed backupLogError(3), Backup log failed backupConfigurationError(4), Backup configuration failed backupVersionFileError(5), Backup software failed backupOtherError(6), Backup file failed is not above list analyzingConfigurationError(7), Analyze configuration error analyzingVersionFileError(8), Analyze software error diskFull(9), NE disk is full downloadingVersionFileError(10),Download software failed updateVersionFileError(11), Update software failed updateBootError(12), Update bootrom failed masterSlaveSynchronizeError(13),Synchronize software to slave board failed updateConflict(14), Other update is executing unavailableServer(15), File server configure failed slaveCardNotInService(16), Slave board is not inservice fileNotExist(17), File not exist on server otherErrors(255) Other errors is not list abovero Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.26 |
zxAnSwSwapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.2.4 |
zxAnSwSwapGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.2.4.1 |
zxAnSwSwapRackThe Rack No. is used for swap version . The multi-variables binding rule should be complied with when swap software. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To swap software, the mandatory and optional variables are as follows: mandatoty:zxAnSwSwapRack, zxAnSwSwapShelf, zxAnSwSwapSlot optional :nonerw Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.4.1.1 |
zxAnSwSwapShelfThe Shelf number is used for swap version. This variable must comply with the multi-variables binding rule described in zxAnSwSwapRack.rw Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.4.1.2 |
zxAnSwSwapSlotThe slot number is used for swap version. This variable must comply with the multi-variables binding rule described in zxAnSwSwapRack.rw Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.4.1.3 |
zxAnCardPatchObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.2.5 |
zxAnSwSavedPatchTableThis table includes the saved patch information. SEQUENCE OF ZxAnSwSavedPatchEntry .1.3.6.1.4.1.3902.1082.20.30.2.5.2 |
zxAnSwSavedPatchEntryAn entry in zxAnSwSavedPatchTable. ZxAnSwSavedPatchEntry .1.3.6.1.4.1.3902.1082.20.30.2.5.2.1 |
zxAnSwPatchRackThe rack number. Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.1 |
zxAnSwPatchShelfThe shelf number. Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.2 |
zxAnSwPatchSlotThe slot number. Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.3 |
zxAnSwPatchNameThe patch file name. DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.4 |
zxAnSwPatchOwnerSwVersionThe software version of the patch belonging to.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.5 |
zxAnSwPatchVersionThe version tag of the patch.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.6 |
zxAnSwPatchSizeThe patch file length.ro Integer32 UNITS "byte" .1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.7 |
zxAnSwPatchBuildTimeThe time of patch build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.8 |
zxAnSwPatchConfActiveStatusThe configured active status of the patch file. activated -- to activate the patch file. deactivated -- to deactivate the patch file.rw Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.9 |
zxAnSwPatchDescriptionThe patch description.ro DisplayString ( SIZE ( 0 .. 255 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.10 |
zxAnSwCardPatchRunStatusTableThis table includes the patch running status information of the card. SEQUENCE OF ZxAnSwCardPatchRunStatusEntry .1.3.6.1.4.1.3902.1082.20.30.2.5.3 |
zxAnSwCardPatchRunStatusEntryAn entry in zxAnSwCardPatchRunStatusTable. ZxAnSwCardPatchRunStatusEntry .1.3.6.1.4.1.3902.1082.20.30.2.5.3.1 |
zxAnSwCardPatchNameThe patch file name of the card. DisplayString .1.3.6.1.4.1.3902.1082.20.30.2.5.3.1.1 |
zxAnSwCardPatchOwnerSwVersionThe software version of the patch belonging to.ro DisplayString .1.3.6.1.4.1.3902.1082.20.30.2.5.3.1.2 |
zxAnSwCardPatchVersionThe version tag of the patch.ro DisplayString .1.3.6.1.4.1.3902.1082.20.30.2.5.3.1.3 |
zxAnSwCardPatchSizeThe patch file length.ro Integer32 UNITS "byte" .1.3.6.1.4.1.3902.1082.20.30.2.5.3.1.4 |
zxAnSwCardPatchBuildTimeThe time of patch build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.5.3.1.5 |
zxAnSwCardPatchActivatedTimeThe time of the patch activated. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.5.3.1.6 |
zxAnSwCardPatchDescriptionThe patch description.ro DisplayString .1.3.6.1.4.1.3902.1082.20.30.2.5.3.1.7 |
zxAnSwCardPatchRunningStatusThe patch running status. activatingSucceeded(1) : value 1 means the activating operation of the patch file is succeeded. activatingFailed(2) : value 2 means the activating operation of the patch file is failed. waitingToBeActivated(3): value 3 means the patch file is waiting to be activated. resettingCardNeeded(4) : value 4 means the patch file has been successfully activated and the card needs to be reset. mismatched(5) : value 5 means the version of the patch file is not matched with the version of the card software.ro Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.5.3.1.8 |
zxAnSwSubcardRunningPatchTableThis table includes the subcard patch information. SEQUENCE OF ZxAnSwSubcardRunningPatchEntry .1.3.6.1.4.1.3902.1082.20.30.2.5.4 |
zxAnSwSubcardRunningPatchEntryAn entry in zxAnSwSubcardRunningPatchTable. ZxAnSwSubcardRunningPatchEntry .1.3.6.1.4.1.3902.1082.20.30.2.5.4.1 |
zxAnSwPatchSubcardSlotThe slot number of the subcard. Integer32 .1.3.6.1.4.1.3902.1082.20.30.2.5.4.1.1 |
zxAnSwSubcardPatchNameThe file name of the patch DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.5.4.1.2 |
zxAnSwSubcardPatchOwnerSwVersionThe software version of the patch belonging to.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.5.4.1.3 |
zxAnSwSubcardPatchVersionThe version tag of the patch.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.5.4.1.4 |
zxAnSwSubcardPatchSizeThe patch file length.ro Integer32 UNITS "byte" .1.3.6.1.4.1.3902.1082.20.30.2.5.4.1.5 |
zxAnSwSubcardPatchBuildTimeThe time of patch build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.5.4.1.6 |
zxAnSwSubcardPatchActivatedTimeThe time of the patch activated. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.5.4.1.7 |
zxAnSwSubcardPatchDescriptionThe patch description.ro DisplayString ( SIZE ( 0 .. 255 ) ) .1.3.6.1.4.1.3902.1082.20.30.2.5.4.1.8 |
zxAnSwSavedPatchPackageTableThis table includes the saved patch package information. SEQUENCE OF ZxAnSwSavedPatchPackageEntry .1.3.6.1.4.1.3902.1082.20.30.2.5.5 |
zxAnSwSavedPatchPackageEntryAn entry in zxAnSwSavedPatchPackageTable. ZxAnSwSavedPatchPackageEntry .1.3.6.1.4.1.3902.1082.20.30.2.5.5.1 |
zxAnSwPatchPkgNameThe name of the patch package. DisplayString .1.3.6.1.4.1.3902.1082.20.30.2.5.5.1.1 |
zxAnSwPatchPkgVersionThe version of the patch package.ro DisplayString .1.3.6.1.4.1.3902.1082.20.30.2.5.5.1.2 |
zxAnSwPatchPkgSizeThe size of the patch package.ro Integer32 UNITS "byte" .1.3.6.1.4.1.3902.1082.20.30.2.5.5.1.3 |
zxAnSwPatchPkgBuildTimeThe build time of patch package.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.5.5.1.4 |
zxAnSwPatchPkgDescriptionThe description of the patch package.ro DisplayString .1.3.6.1.4.1.3902.1082.20.30.2.5.5.1.5 |
zxAnSwPatchPkgConfActiveStatusThe configured active status of the patch package. activated(1) : value 1 means the configured active status of the patch package is activated. deactivated(2) : value 2 means the configured active status of the patch package is deactivated.rw Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.5.5.1.6 |
zxAnSwPatchPkgActualActiveStatusThe actual active status of the patch package. activated(1) : value 1 means the patch package is activated. deactivated(2) : value 2 means the patch package is deactivated.ro Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.5.5.1.7 |
zxAnSwSavedPatchPackageFileTableThis table includes the information of the file inside the patch package. SEQUENCE OF ZxAnSwSavedPatchPackageFileEntry .1.3.6.1.4.1.3902.1082.20.30.2.5.6 |
zxAnSwSavedPatchPackageFileEntryAn entry in zxAnSwSavedPatchPackageFileTable. ZxAnSwSavedPatchPackageFileEntry .1.3.6.1.4.1.3902.1082.20.30.2.5.6.1 |
zxAnSwPatchPkgFileNameThe name of the file inside the patch package. DisplayString .1.3.6.1.4.1.3902.1082.20.30.2.5.6.1.1 |
zxAnSwPatchPkgFileBuildTimeThe build time of the file inside the patch package.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.20.30.2.5.6.1.2 |
zxAnSwPatchPkgFileNeedResetCardWhether the card needs to be reset. yes(1) : value 1 means need to reset the card. no(2) : value 2 means no need to reset the card.ro Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.5.6.1.3 |
zxAnSwPatchPkgFileActiveStatusThe patch file active status. activated(1) : value 1 means the patch file is activated. deactivated(2) : value 2 means the patch file is deactivated.ro Enumeration .1.3.6.1.4.1.3902.1082.20.30.2.5.6.1.4 |
zxAnSwNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.3 |
zxAnSwAutoUpdateTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.3.1 |
zxAnSwAutoUpdateFinishedA zxAnSwAutoUpdateFinished is sent when the agent has detected that the automatic update is finished. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.20.30.3.1.1 |
zxAnSwAutoUpdateSwDifferA zxAnSwAutoUpdateSwDiffer is sent when the agent has detected different version files between NE and file server. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.20.30.3.1.2 |
zxAnSwAutoUpdateSwChkFailedA zxAnSwAutoUpdateSwChkFailed is sent when the agent has detected that version check is failed. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.20.30.3.1.3 |
zxAnSwConformance OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.4 |
zxAnSwCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.4.1 |
zxAnSwComplianceThe compliance statement for SNMP entities which implement the ZTE-AN-SOFTWARE-MIB. Unknown .1.3.6.1.4.1.3902.1082.20.30.4.1.1 |
zxAnSwGroups OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.20.30.4.2 |
zxAnSwCardRunVerGroupThe collection of objects which are used to represent chassis version information, include card running version information. Unknown .1.3.6.1.4.1.3902.1082.20.30.4.2.1 |
zxAnSwSubcardRunVerGroupThe collection of objects which are used to represent chassis version information, include subcard running version information. Unknown .1.3.6.1.4.1.3902.1082.20.30.4.2.2 |
zxAnSwImageGroupThe collection of objects which are used to represent chassis version information, include card saved version information. Unknown .1.3.6.1.4.1.3902.1082.20.30.4.2.3 |
zxAnSwManualUpdateGroupThe collection of objects which are used to update software by manual. Unknown .1.3.6.1.4.1.3902.1082.20.30.4.2.4 |
zxAnSwManualUpdateStatusGroupThe collection of objects which are used to represent chassis software update status. Unknown .1.3.6.1.4.1.3902.1082.20.30.4.2.5 |
zxAnSwAutoUpdateChkGroupThe collection of objects which are used to management version automatic updating. Automatic version check to list the different files name between NE and file server. Unknown .1.3.6.1.4.1.3902.1082.20.30.4.2.6 |
zxAnSwAutoUpdateOperGroupThe collection of objects which are used to management version automatic updating. Automatic version update to download version from file server and to take effect. Unknown .1.3.6.1.4.1.3902.1082.20.30.4.2.7 |
zxAnSwSwapGroupThe collection of objects which are used to swap version . Unknown .1.3.6.1.4.1.3902.1082.20.30.4.2.8 |
zxAnSwNotificationsGroupThe notifications which indicate specific changes, include automatic update check,automatic update status. Unknown .1.3.6.1.4.1.3902.1082.20.30.4.2.9 |