ZTE-AN-ENVMON-MIB
AI MIB Summary
The ZTE-AN-ENVMON-MIB module enables SNMP-based monitoring of environmental parameters within ZTE Access Node hardware, specifically tracking critical metrics such as temperature, fan status, and power supply conditions to ensure physical infrastructure integrity.
This MIB defines zte Access Node managed environment monitor.
Main OID:
zxAnEnvMonMib.1.3.6.1.4.1.3902.1082.10.10
212
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
212 total| Object Name |
|---|
zxAnEnvMonMibThis MIB defines zte Access Node managed environment monitor. MODULE-IDENTITY .1.3.6.1.4.1.3902.1082.10.10 |
zxAnEnvMonGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.1 |
zxAnEnvMonCapabilitiesThe environment management capabilities of this equipment.The bit value 1 means the function represented by this bit is supported by this equipment. NOTE: Not recommended to display it in NMS.ro Bits .1.3.6.1.4.1.3902.1082.10.10.1.1 |
zxAnEnvMonObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.2 |
zxAnEnvParamObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.2.1 |
zxAnEnvParamGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.2.1.1 |
zxAnEnvCardShutdownReasonThe alarm reason of zxAnEnvCardShutdownAlm. envHighTemperature(1): Environment temperature is too high. cardHighTemperature(2):Card self temperature is too high. chipHighTemperature(3):Card's chip temperature is too high. emergencyPowerSaving(4):Emergency power saving action has been taken caused by AC power failure.ro Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.1.1.1 |
zxAnEnvParamTableThis table includes environment temperature information. SEQUENCE OF ZxAnEnvParamEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.5 |
zxAnEnvParamEntryThe entry of zxAnEnvParamTable. ZxAnEnvParamEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.5.1 |
zxAnEnvRackThe index of rack. Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.1 |
zxAnEnvShelfThe index of shelf. Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.2 |
zxAnEnvTempThe temperature of the environment.ro Integer32 UNITS "Centigrade" .1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.3 |
zxAnEnvTempHighAlmThresholdThe temperature high alarm threshold of the environment.rw Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.4 |
zxAnEnvTempCriticalAlmThresholdThe temperature critical alarm threshold of the environment.ro Integer32 UNITS "Centigrade" .1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.5 |
zxAnEnvTempLowAlmThresholdThe temperature low alarm threshold of the environment.rw Integer32(-40..0) UNITS "Centigrade" .1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.6 |
zxAnEnvShelfPowerConsumptionPower consumption of the shelf. Value 0 means not available.ro Integer32 UNITS "0.001W" .1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.7 |
zxAnEnvShelfVoltageVoltage of the shelf. Value 0 means not available.ro Integer32 UNITS "0.001Volts" .1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.8 |
zxAnEnvShelfCurrentCurrent of the shelf. Value 0 means not available.ro Integer32 UNITS "0.001Amp" .1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.9 |
zxAnCardEnvParamTableThis table includes card temperature information. SEQUENCE OF ZxAnCardEnvParamEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.6 |
zxAnCardEnvParamEntryThe entry of zxAnCardEnvParamTable. ZxAnCardEnvParamEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.6.1 |
zxAnEnvSlotThe index of slot, the range is [0,20] of 19-inch shelf and [0,22] of 21-inch shelf. Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.1 |
zxAnCardTempThe current temperature of the card environment. NOTE: 1. In current system, only certain cards support temperature-reading, such as SCXL, GTGOD cards. 2. If the card is not configured, we cannot get its temperature. 3. For the configured but not support temperature-reading cards, we use -1000 as an invalid temperature value to note its temperature.ro Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.2 |
zxAnCardPowerConsumptionPower consumption of the card. Value 0 means not available.ro Integer32 UNITS "0.001W" .1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.3 |
zxAnCardVoltageVoltage of the card. Value 0 means not available.ro Integer32 UNITS "0.001Volts" .1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.4 |
zxAnCardCurrentCurrent of the card. Value 0 means not available.ro Integer32 UNITS "0.001Amp" .1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.5 |
zxAnCardCriticalTempAlmThresholdThe critical temperature alarm threshold of the card.ro Integer32 UNITS "Centigrade" .1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.6 |
zxAnCardOptHighestTempThe highest temperature of the optical modules in the card.ro Integer32 UNITS "0.001Degrees" .1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.7 |
zxAnCardOptCriticalTempAlmThreshThe critical optical temperature alarm threshold.ro Integer32 UNITS "Centigrade" .1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.8 |
zxAnCardOptHighestTempPortNoThe port No. which the optical module is located at, and the optical module has the highest temperature.ro Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.9 |
zxAnCardHeatRadiationAlmThreshThe heat radiation abnormal alarm threshold of the card.ro Integer32 UNITS "Centigrade" .1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.10 |
zxAnCardEnvHis15MinPerfTableThe 15 minutes interval performance data table of card temperature. SEQUENCE OF ZxAnCardEnvHis15MinPerfEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.7 |
zxAnCardEnvHis15MinPerfEntryThe 15 minutes interval performance data entry of card temperature. ZxAnCardEnvHis15MinPerfEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.7.1 |
zxAnCardEnvHis15MinIntervalNoPerformance data interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.1.7.1.1 |
zxAnCardEnvHis15MinDateTimeThe 15 minutes interval performance data generation time.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.10.10.2.1.7.1.2 |
zxAnCardEnvHis15MinTempThe 15 minutes interval average temperature of card.ro Counter64 .1.3.6.1.4.1.3902.1082.10.10.2.1.7.1.3 |
zxAnCardEnvHis1DayPerfTableThe 1 day interval performance data table of card temperature. SEQUENCE OF ZxAnCardEnvHis1DayPerfEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.8 |
zxAnCardEnvHis1DayPerfEntryThe 1 day interval performance data entry of card temperature. ZxAnCardEnvHis1DayPerfEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.8.1 |
zxAnCardEnvHis1DayIntervalNoPerformance data interval number 1 is the the most recent previous interval; interval 7 is 1 week ago. Intervals 2..7 are optional. Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.1.8.1.1 |
zxAnCardEnvHis1DayDateTimeThe 1 day interval performance data generation time.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.10.10.2.1.8.1.2 |
zxAnCardEnvHis1DayTempThe 1 day interval average temperature of card.ro Counter64 .1.3.6.1.4.1.3902.1082.10.10.2.1.8.1.3 |
zxAnCardEnvAlmProfileConfTableThe performance alarm threshold profile items configuration table of card temperature. SEQUENCE OF ZxAnCardEnvAlmProfileConfEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.9 |
zxAnCardEnvAlmProfileConfEntryThe performance alarm threshold profile items configuration entry of card temperature. ZxAnCardEnvAlmProfileConfEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.9.1 |
zxAnCardEnvAlmProfileNameThe performance alarm threshold profile name. DisplayString .1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.1 |
zxAnCardEnvPerfVariableThe object identifier of performance variables. OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.2 |
zxAnCardEnvRiseAlmThreshThe threshold for rising alarm.rw HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.3 |
zxAnCardEnvClrRiseAlmThreshThe threshold for rising alarm restore.rw HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.4 |
zxAnCardEnvRiseWarnThreshThe threshold for rising warning.rw HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.5 |
zxAnCardEnvClrRiseWarnThreshThe threshold for rising warning restore.rw HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.6 |
zxAnCardEnvFallWarnThreshThe threshold for falling warning.rw HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.7 |
zxAnCardEnvClrFallWarnThreshThe threshold for falling warning restore.rw HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.8 |
zxAnCardEnvFallAlmThreshThe threshold for falling alarm.rw HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.9 |
zxAnCardEnvClrFallAlmThreshThe threshold for falling alarm restore.rw HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.10 |
zxAnCardEnvAlmPrfConfRowStatusThe status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.50 |
zxAnCardEnvAlmProfileApplyTableThe performance alarm threshold profile application table of card temperature. SEQUENCE OF ZxAnCardEnvAlmProfileApplyEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.10 |
zxAnCardEnvAlmProfileApplyEntryThe performance alarm threshold profile application entry of card temperature. ZxAnCardEnvAlmProfileApplyEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.10.1 |
zxAnCardEnvAlmPrfThe performance alarm threshold profile.rw DisplayString .1.3.6.1.4.1.3902.1082.10.10.2.1.10.1.1 |
zxAnCardEnvAlmPrfApplyRowStatusThe status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.10.10.2.1.10.1.50 |
zxAnCardEnvAlmProfileTableThe performance alarm threshold profile table of card temperature. SEQUENCE OF ZxAnCardEnvAlmProfileEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.11 |
zxAnCardEnvAlmProfileEntryThe performance alarm threshold profile entry of card temperature. ZxAnCardEnvAlmProfileEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.11.1 |
zxAnCardEnvAlmPrfRowStatusThe status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.10.10.2.1.11.1.50 |
zxAnEnvOverheatProtectTableEnvironment overheat protection table. SEQUENCE OF ZxAnEnvOverheatProtectEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.13 |
zxAnEnvOverheatProtectEntryEnvironment overheat protection entry. To modify zxAnEnvOverheatProtectEnable from disabled to enabled, zxAnEnvOverheatProtectEnable is mandatory, zxAnEnvOverheatProtectDelay is optional. To modify zxAnEnvOverheatProtectEnable from enabled to disabled, only zxAnEnvOverheatProtectEnable is mandatory. ZxAnEnvOverheatProtectEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.13.1 |
zxAnEnvOverheatProtectEnableEnables or disables the environment overheat protection function.rw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.1.13.1.1 |
zxAnEnvOverheatProtectDelayThe delaying time between two steps. For example, when temperature is higher than the threshold, takes an action as the step 1, and delays the value of zxAnEnvOverheatProtectDelay, if the temperature is still higher than the threshold, takes an action as step 2.rw Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.1.13.1.2 |
zxAnEnvOverheatProtectFirstStepThe first step when the environment temperature exceeds zxAnEnvTempHighAlmThreshold.rw ZxAnEnvShutdownServiceType .1.3.6.1.4.1.3902.1082.10.10.2.1.13.1.3 |
zxAnEnvOverheatProtectSecondStepThe second step when the environment temperature still exceeds zxAnEnvTempHighAlmThreshold after first step has been done.rw ZxAnEnvShutdownServiceType .1.3.6.1.4.1.3902.1082.10.10.2.1.13.1.4 |
zxAnEnvCardOverheatProtectTableCard overheat protection table. SEQUENCE OF ZxAnEnvCardOverheatProtectEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.14 |
zxAnEnvCardOverheatProtectEntryCard overheat protection entry. ZxAnEnvCardOverheatProtectEntry .1.3.6.1.4.1.3902.1082.10.10.2.1.14.1 |
zxAnEnvCardCriticalTempProtectEnEnables or disables the card critical temperature protection function. If it is enabled, the card will be stopped when the card temperature is higher than the card critical temperature.rw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.1.14.1.1 |
zxAnEnvMonInterfaceObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.2.2 |
zxAnEnvMonInterfaceTableThis table includes the environment interface information. SEQUENCE OF ZxAnEnvMonInterfaceEntry .1.3.6.1.4.1.3902.1082.10.10.2.2.5 |
zxAnEnvMonInterfaceEntryThe entry of zxAnEnvMonInterfaceTable. ZxAnEnvMonInterfaceEntry .1.3.6.1.4.1.3902.1082.10.10.2.2.5.1 |
zxAnEnvMonInterfaceUsageThe equipment type connected to the environment monitor interface.rw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.2.5.1.1 |
zxAnEnvEpmConnectPortThe port no which epm connectrw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.2.5.1.2 |
zxAnEnvBackplaneInterfaceUsageThe equipment type connected to the Backplane Interface. fan(1): the fan connect to the Backplane Interface; noUse(3): not used; noSupport(255):not support.rw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.2.5.1.3 |
zxAnEnvPowerSupplyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.2.3 |
zxAnPowerSupplyGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.2.3.1 |
zxAnEnvEmergencyPowerSaveEnableEnables or disables the emergency power saving.rw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.3.1.1 |
zxAnEnvEmergencyPowerSaveDelayIf AC power failure lasts more than zxAnEnvEmergencyPowerSaveDelay, emergency power saving action will be taken.rw Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.3.1.2 |
zxAnEnvEmergencyPowerSaveRecoverIf AC power recovered, after this delay, the emergency power save action will be cancelled.rw Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.3.1.3 |
zxAnEnvEmergencyPowerSaveSvcTypeThe service types will be shut down in emergency power saving action.rw ZxAnEnvShutdownServiceType .1.3.6.1.4.1.3902.1082.10.10.2.3.1.4 |
zxAnEnvPowerModeThe current power supply mode of the equipment, emergency power saving action is on the basis of the power mode zxAnEnvPowerMode. normal(1) means using AC power as power supply. battery(2) means using storage battery as power supply.rw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.3.1.5 |
zxAnEnvEmergencyBatteryVoltageThe current voltage of the battery.ro Integer32 UNITS "0.001Volts" .1.3.6.1.4.1.3902.1082.10.10.2.3.1.6 |
zxAnEnvEmergencyBatteryThresholdThe threshold of the battery voltage. If the battery voltage is less than zxAnEnvEmergencyBatteryThreshold, the emergency power saving action will be taken.rw Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.3.1.7 |
zxAnPowerSupplyCapabilityTableThis table includes power supply capability table. SEQUENCE OF ZxAnPowerSupplyCapabilityEntry .1.3.6.1.4.1.3902.1082.10.10.2.3.10 |
zxAnPowerSupplyCapabilityEntryThe entry of zxAnPowerSupplyCapabilityTable. ZxAnPowerSupplyCapabilityEntry .1.3.6.1.4.1.3902.1082.10.10.2.3.10.1 |
zxAnPowerSupplyMaxPowerNumThe max number of power supply in the equipment.ro Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.3.10.1.1 |
zxAnPowerSupplyTableThis table includes power supply table. SEQUENCE OF ZxAnPowerSupplyEntry .1.3.6.1.4.1.3902.1082.10.10.2.3.11 |
zxAnPowerSupplyEntryAn entry in zxAnPowerSupplyTable. ZxAnPowerSupplyEntry .1.3.6.1.4.1.3902.1082.10.10.2.3.11.1 |
zxAnPowerSupplyOperStatusThe operational status of the power supply module.ro Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.1 |
zxAnPowerSupplyInVoltageThe actual input volts of the power supply module.ro Integer32 UNITS "Volts" .1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.2 |
zxAnPowerSupplyInVoltageStatusThe volt status of the power supply. normal(1) -- The input power is normal. overVoltage(2) -- The input power is over voltage. underVoltage(3) -- The input power is under voltage. off(4)) -- No power input.ro Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.3 |
zxAnPowerInVoltageUpperThreshThe upper threshold of input volts.The alarm should be generated when zxAnPowerSupplyInVoltage exceeds this threshold. If it is 0, no alarm reported to manager.rw Integer32 UNITS "Volts" .1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.4 |
zxAnPowerInVoltageLowerThreshThe lower threshold of input volts.The alarm should be generated when zxAnPowerSupplyInVoltage is lower than this threshold. If it is 0, no alarm reported to manager.rw Integer32 UNITS "Volts" .1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.5 |
zxAnPowerSupplyInCurrentThe actual current of the power supply module.ro Integer32 UNITS "Amp" .1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.6 |
zxAnPowerInCurrentThreshThe upper threshold of input current.The alarm should be generated when zxAnPowerSupplyInCurrent exceeds this threshold. If it is 0, no alarm reported to manager.rw Integer32 UNITS "Amp" .1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.7 |
zxAnEnvFanObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.2.4 |
zxAnEnvFanTrayTableThe Fan Tray Control table, with rack and shelf information. SEQUENCE OF ZxAnEnvFanTrayEntry .1.3.6.1.4.1.3902.1082.10.10.2.4.10 |
zxAnEnvFanTrayEntryAn entry in the zxAnEnvFanTrayTable. ZxAnEnvFanTrayEntry .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1 |
zxAnFanTrayAlarmBeepEnableThe control status of the fan alarm beep.rw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.1 |
zxAnFanTrayAutoSwitchByCardUpEnable/disable fan auto switch with card installation. If it is enabled, the fan under the card should be switched to running status when the card is installed. Otherwise, the fan should be shutdown.rw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.2 |
zxAnFanTrayHardwareVersionThe hardware version of the fan trayro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.3 |
zxAnFanTraySoftwareVersionThe software version of the fan trayro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.4 |
zxAnFanTraySpeedCtrlModeThe speed control mode of the fan. When this value is fixSpeed,zxAnFanTrayAdminStatus, zxAnFanTrayConfSpeedLevel,zxAnEnvFanAdminStatus and zxAnEnvFanConfSpeedLevel can be configured.rw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.5 |
zxAnFanTrayLowSpeedThe speed value of the fan's low speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: Different equipment maybe has different default value.rw Integer32 UNITS "RPM" .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.6 |
zxAnFanTrayStdSpeedThe speed value of the fan's standard speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: Different equipment maybe has different default value.rw Integer32 UNITS "RPM" .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.7 |
zxAnFanTrayHighSpeedThe speed value of the fan's high speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: Different equipment maybe has different default value.rw Integer32 UNITS "RPM" .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.8 |
zxAnFanTraySuperSpeedThe speed value of the fan's super speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: Different equipment maybe has different default value.rw Integer32 UNITS "RPM" .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.9 |
zxAnFanTrayLowSpeedShiftTempThe temperature to activate the fan tray to shift to the low speed level.rw Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.10 |
zxAnFanTrayStdSpeedShiftTempThe temperature to activate the fan tray to shift to the standard speed level.rw Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.11 |
zxAnFanTrayHighSpeedShiftTempThe temperature to activate the fan tray to shift to the high speed level.rw Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.12 |
zxAnFanTraySuperSpeedShiftTempThe temperature to activate the fan tray to shift to the super speed level.rw Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.13 |
zxAnFanTrayLowSpeedPercentThe percentage of speed of the low speed level.rw INTEGER .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.14 |
zxAnFanTrayStdSpeedPercentThe percentage of speed of the standard speed level.rw INTEGER .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.15 |
zxAnFanTrayHighSpeedPercentThe percentage of speed of the high speed level.rw INTEGER .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.16 |
zxAnFanTraySuperSpeedPercentThe percentage of speed of the super speed level.rw INTEGER .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.17 |
zxAnFanTrayAdminStatusThe administrative status of the fan tray. When zxAnFanTrayAdminStatus is configured, all the zxAnEnvFanAdminStatus values are consistent with zxAnFanTrayAdminStatus.rw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.18 |
zxAnFanTrayConfSpeedLevelThe configured speed level of the fan tray. When zxAnFanTrayConfSpeedLevel is configured, all the zxAnEnvFanConfSpeedLevel values are consistent with zxAnFanTrayConfSpeedLevel. This variable is valid if zxAnFanTrayAdminStatus is up.rw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.19 |
zxAnFanTrayPowerConsumptionPower consumption of the fan tray. Value 0 means not available.ro Integer32 UNITS "0.001W" .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.20 |
zxAnFanTraySnThe serial number of fan tray.rw DisplayString .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.21 |
zxAnFanTrayVoltageVoltage of the fan tray. Value 0 means not available.ro Integer32 UNITS "0.001Volts" .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.22 |
zxAnFanTrayCurrentCurrent of the fan tray. Value 0 means not available.ro Integer32 UNITS "0.001Amp" .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.23 |
zxAnFanTrayTempThe temperature of the fan tray.ro Integer32 UNITS "Centigrade" .1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.24 |
zxAnEnvFanTableThis table includes speed information and operational status of the fan units. SEQUENCE OF ZxAnEnvFanEntry .1.3.6.1.4.1.3902.1082.10.10.2.4.11 |
zxAnEnvFanEntryThe entry of zxAnEnvFanTable. ZxAnEnvFanEntry .1.3.6.1.4.1.3902.1082.10.10.2.4.11.1 |
zxAnEnvFanIndexThe index of this fan unit. For 19-inch shelf, there are 3 fans in each fan tray. The fan index should be integer in [1,3]. For 21-inch shelf, there are 4 fans. The fan index should be integer in [1,4]. Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.1 |
zxAnEnvFanConfSpeedLevelThe configured speed level of the fan unit singly.rw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.2 |
zxAnEnvFanActualSpeedLevelThe actual speed level of the fan unit.ro Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.3 |
zxAnEnvFanAdminStatusThe administrative status of the fan unit singly.rw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.4 |
zxAnEnvFanOperStatusThe operational status of the fan unit.ro Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.5 |
zxAnEnvFanOnlineStatusThe actual online status of the fan unit.ro Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.6 |
zxAnEnvFanActualSpeedThe actual speed of the fan unit. NOTE: If not supported, NMS should use the speed value of zxAnEnvFanActualSpeedLevel.ro Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.7 |
zxAnEnvFanTrayResetObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.2.4.12 |
zxAnEnvFanTrayResetRackThe rack number of the fan tray.rw Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.4.12.1 |
zxAnEnvFanTrayResetShelfListThe shelf number list of the fan tray. They can be reset in batch, for example: 1,2,3. Setting this object to empty means all the fan trays connected with zxAnEnvFanTrayRack will be reset.rw DisplayString ( SIZE ( 0 .. 16 ) ) .1.3.6.1.4.1.3902.1082.10.10.2.4.12.2 |
zxAnEnvFanTrayResetActionReset the fan trays. To query this object, always return 1.rw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.4.12.3 |
zxAnEnvDeviceObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.2.5 |
zxAnEnvDeviceTableThe table of environment device. SEQUENCE OF ZxAnEnvDeviceEntry .1.3.6.1.4.1.3902.1082.10.10.2.5.2 |
zxAnEnvDeviceEntryThe entry of the zxAnEnvDeviceTable. ZxAnEnvDeviceEntry .1.3.6.1.4.1.3902.1082.10.10.2.5.2.1 |
zxAnEnvDeviceIdThe ID of this environment device. Value 1-50 is default value which can not be modified or deleted. If add a new device, the ID will be starting from 51. Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.5.2.1.1 |
zxAnEnvDeviceNameThe name of the environment device.rw DisplayString .1.3.6.1.4.1.3902.1082.10.10.2.5.2.1.2 |
zxAnEnvDeviceRowStatusThe status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.10.10.2.5.2.1.50 |
zxAnEnvDevMonSwitchTableThe table of the switch which monitors environment device. SEQUENCE OF ZxAnEnvDevMonSwitchEntry .1.3.6.1.4.1.3902.1082.10.10.2.5.3 |
zxAnEnvDevMonSwitchEntryThe entry of the zxAnEnvDevMonSwitchTable. ZxAnEnvDevMonSwitchEntry .1.3.6.1.4.1.3902.1082.10.10.2.5.3.1 |
zxAnEnvDevMonSwitchIdThe ID of the switch. Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.5.3.1.1 |
zxAnEnvDevMonSwitchDeviceIdThe ID of the device which monitored by the switch. Value 0 means this switch does not monitor any device.rw Integer32 .1.3.6.1.4.1.3902.1082.10.10.2.5.3.1.2 |
zxAnEnvDevMonSwitchTrapEnableEnables or disables the environment device abnormal trap.rw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.5.3.1.3 |
zxAnEnvDevMonSwitchNormalStatusThe normal status of the environment device.rw Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.5.3.1.4 |
zxAnEnvDevMonSwitchCurrStatusThe current status of the environment device.ro Enumeration .1.3.6.1.4.1.3902.1082.10.10.2.5.3.1.5 |
zxAnEnvMonNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.3 |
zxAnEnvMonTempTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.3.1 |
zxAnEnvHighTempAlmThe environment temperature has exceeded high temperature threshold zxAnEnvTempHighAlmThreshold. The zxAnEnvTemp object identifies the current temperature. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.1 |
zxAnEnvHighTempClrThe environment temperature has returned to normal operating temperature from zxAnEnvTempHighAlmThreshold. The zxAnEnvTemp object identifies the current temperature. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.2 |
zxAnEnvTempSensorFailureIt indicates that the temperature sensor is in fault. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.5 |
zxAnEnvCriticalTempAlmThe environment temperature has exceeded critical temperature threshold zxAnEnvTempCriticalAlmThreshold. The zxAnEnvTemp object identifies the current temperature. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.6 |
zxAnEnvCriticalTempClrThe environment temperature has returned to normal operating temperature from zxAnEnvTempCriticalAlmThreshold. The zxAnEnvTemp object identifies the current temperature. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.7 |
zxAnEnvLowTempAlmThe environment temperature is below low temperature threshold zxAnEnvTempLowAlmThreshold. The zxAnEnvTemp object identifies the current temperature. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.8 |
zxAnEnvLowTempClrThe environment temperature has returned to normal operating temperature from zxAnEnvTempLowAlmThreshold. The zxAnEnvTemp object identifies the current temperature. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.9 |
zxAnEnvCardShutdownAlmA zxAnEnvCardShutdownAlm trap is sent when the card has been shut down because agent has detected that the temperature is too high or the AC power is failure and the battery voltage is lower than zxAnEnvEmergencyBatteryThreshold. zxAnEnvCardShutdownReason indicates the real reason. When zxAnEnvCardShutdownReason is envHighTemperature ( 1 ), it means the environment temperature is too high, zxAnEnvTemp is the value of current environment temperature, zxAnCardTemp is invalid and should be zero. zxAnEnvEmergencyBatteryVoltage and zxAnEnvEmergencyBatteryThreshold are invalid and should be zero. When zxAnEnvCardShutdownReason is cardHighTemperature ( 2 ), it means the card temperature is too high, zxAnCardTemp is the value of current card temperature, zxAnEnvTemp is invalid and should be zero. zxAnEnvEmergencyBatteryVoltage and zxAnEnvEmergencyBatteryThreshold are invalid and should be zero. When zxAnEnvCardShutdownReason is chipHighTemperature ( 3 ), it means the temperature of the chip on the card is too high, zxAnCardTemp and zxAnEnvTemp are invalid and should be zero. zxAnEnvEmergencyBatteryVoltage and zxAnEnvEmergencyBatteryThreshold are invalid and should be zero. When zxAnEnvCardShutdownReason is emergencyPowerSaving ( 4 ), it means the AC power is failure, the emergency power saving action has been taken, zxAnCardTemp and zxAnEnvTemp are invalid and should be zero. zxAnEnvEmergencyBatteryVoltage is the value of the current battery voltage, zxAnEnvEmergencyBatteryThreshold is the threshold of the battery voltage. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.30 |
zxAnEnvCardShutdownClrA zxAnEnvCardShutdownClr trap is sent when the card temperature becomes normal, or the environment temperature becomes normal, or the chip temperature becomes normal, or the battery voltage is higher than zxAnEnvEmergencyBatteryThreshold or AC power becomes normal. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.31 |
zxAnEnvTemperatureAbnormalAlmIn temperature control mode, a zxAnEnvTemperatureAbnormalAlm trap is sent when the environment temperature can't be read. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.32 |
zxAnEnvTemperatureAbnormalClrA zxAnEnvTemperatureAbnormalClr trap is sent when the zxAnEnvTemperatureAbnormalAlm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.33 |
zxAnEnvNearCriticalTempAlmA zxAnEnvNearCriticalTempAlm trap is sent when the environment temperature is close to the environment critical temperature alarm threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.34 |
zxAnEnvNearCriticalTempClrA zxAnEnvNearCriticalTempClr trap is sent when the zxAnEnvNearCriticalTempAlm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.35 |
zxAnEnvCardNearCriticalTempAlmA zxAnEnvCardNearCriticalTempAlm trap is sent when the card temperature is close to the card critical temperature alarm threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.36 |
zxAnEnvCardNearCriticalTempClrA zxAnEnvCardNearCriticalTempClr trap is sent when the zxAnEnvCardNearCriticalTempAlm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.37 |
zxAnEnvOptNearCriticalTempAlmA zxAnEnvOptNearCriticalTempAlm trap is sent when the optical module temperature is close to the optical module critical temperature alarm threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.38 |
zxAnEnvOptNearCriticalTempClrA zxAnEnvOptNearCriticalTempClr trap is sent when the zxAnEnvOptNearCriticalTempAlm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.39 |
zxAnEnvHeatRadiationAbnormalAlmA zxAnEnvHeatRadiationAbnormalAlm trap is sent when the temperature difference between the card and the environment exceeds the zxAnCardHeatRadiationAlmThresh. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.40 |
zxAnEnvHeatRadiationAbnormalClrA zxAnEnvHeatRadiationAbnormalClr trap is sent when the zxAnEnvHeatRadiationAbnormalAlm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.1.41 |
zxAnEnvMonInterfaceTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.3.2 |
zxAnEnvMonitorInterfaceLinkDownIt indicates that the agent has detected that the link at the environment monitoring interface has been down. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.2.1 |
zxAnEnvMonitorInterfaceLinkUpIt indicates that the agent has detected that the link at the environment monitoring interface has been up. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.2.2 |
zxAnEnvMonPowerSupplyTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.3.3 |
zxAnEnvPowerSupplyModuleDownIt indicates that the power supply module is down. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.3.1 |
zxAnEnvPowerSupplyModuleUpIt indicates that the power supply module is up. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.3.2 |
zxAnEnvPowerOverVoltageAlmIt indicates that the input voltage of power supply is over-voltage. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.3.3 |
zxAnEnvPowerOverVoltageClrIt indicates that the over-voltage fault is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.3.4 |
zxAnEnvPowerUnderVoltageAlmIt indicates that the input voltage of power supply is under-voltage. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.3.5 |
zxAnEnvPowerUnderVoltageClrIt indicates that the under-voltage fault is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.3.6 |
zxAnEnvPowerOffIt indicates that the power supply is off. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.3.7 |
zxAnEnvPowerOnIt indicates that the power supply off fault is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.3.8 |
zxAnEnvEmergencyPowerSaveAlmThe current power supply switches to storage battery, the emergency power saving action has been taken. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.3.9 |
zxAnEnvEmergencyPowerSaveClrThe current power supply switches to normal AC power. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.3.10 |
zxAnEnvACPowerDownAlmA zxAnEnvACPowerDownAlm trap is sent when the agent detects no AC power input. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.3.11 |
zxAnEnvACPowerDownClrA zxAnEnvACPowerDownClr trap is sent when the agent detects AC power input. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.3.12 |
zxAnEnvNoBatteryAlmA zxAnEnvNoBatteryAlm trap is sent when no battery found by the agent. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.3.13 |
zxAnEnvNoBatteryClrA zxAnEnvNoBatteryClr trap is sent when the battery has been found by the agent. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.3.14 |
zxAnEnvBatteryUnderVoltageAlmA zxAnEnvBatteryUnderVoltageAlm trap is sent when the battery voltage is under-voltage. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.3.15 |
zxAnEnvBatteryUnderVoltageClrA zxAnEnvBatteryUnderVoltageClr trap is sent when the battery voltage becomes normal. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.3.16 |
zxAnEnvMonFanTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.3.4 |
zxAnEnvFanLinkDownIt indicates that the agent has detected that fan is offline. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.4.1 |
zxAnEnvFanLinkUpIt indicates that the agent has detected that fan is online. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.4.2 |
zxAnEnvFanTrayLinkDownIt indicates that the agent has detected that the link at the fan card interface has been down. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.4.3 |
zxAnEnvFanTrayLinkUpIt indicates that the agent has detected that the link at the fan card interface has been up. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.4.4 |
zxAnEnvFanFailureAlmIt indicates that the fan is in fault. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.4.5 |
zxAnEnvFanFailureClrIt indicates that the fan's fault is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.4.6 |
zxAnEnvDeviceTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.3.5 |
zxAnEnvDeviceAbnormalAlmA zxAnEnvDeviceAbnormalAlm trap is sent when the current status of environment device is inconsistent with normal status. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.5.1 |
zxAnEnvDeviceAbnormalClrA zxAnEnvDeviceAbnormalClr trap is sent when current status of environment device is consistent with normal status. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.10.3.5.2 |
zxAnEnvMonConformance OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.4 |
zxAnEnvMonCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.4.1 |
zxAnEnvMonComplianceThe compliance statement for SNMP entities which implement the ZTE-AN-ENVMON-MIB. Unknown .1.3.6.1.4.1.3902.1082.10.10.4.1.1 |
zxAnEnvMonGroups OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.10.4.2 |
zxAnEnvMonCapabilitiesGroupThe collection of objects which are used to represent environment management capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. Unknown .1.3.6.1.4.1.3902.1082.10.10.4.2.1 |
zxAnEnvTempGroupThe collection of objects which are used to represent the temperature information of this equipment/card and to set the temperature alarm threshold of the environment/card. Unknown .1.3.6.1.4.1.3902.1082.10.10.4.2.2 |
zxAnEnvCardTempGroupThe collection of objects which are used to represent temperature performance of the card environment. Unknown .1.3.6.1.4.1.3902.1082.10.10.4.2.3 |
zxAnEnvInterfaceGroupThe collection of objects which are used to represent the interface connection of the equipment. Unknown .1.3.6.1.4.1.3902.1082.10.10.4.2.4 |
zxAnEnvPowerSupplyGroupThe collection of objects which are used to provide power management functions, include power count and the voltage status of the power supply. Unknown .1.3.6.1.4.1.3902.1082.10.10.4.2.5 |
zxAnEnvFanTrayTableGroupThe collection of objects which are used to provide fan management functions, include setting the speed control mode and the percentage of speed of the different speed level of the fan. Unknown .1.3.6.1.4.1.3902.1082.10.10.4.2.6 |
zxAnEnvFanTableGroupThe collection of objects which are used to provide the speed information and operational status of the fan. Unknown .1.3.6.1.4.1.3902.1082.10.10.4.2.7 |
zxAnEnvMonNotificationsGroupThe notifications which indicate specific changes, include temperature, fan status, power status and gpon card status. Unknown .1.3.6.1.4.1.3902.1082.10.10.4.2.8 |