ZXR10-POE-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
22
Objects
Active
Status
1
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
zte OBJECT IDENTIFIER .1.3.6.1.4.1.3902 |
zxr10 OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3 |
zxr10POE OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3.319 |
pseTableA table of objects that display and control attributes of the main power source in a PSE device. Ethernet switches are one example of boxes that would support these objects. Values of all read-write objects in this table are persistent at restart/reboot. SEQUENCE OF PseEntry .1.3.6.1.4.1.3902.3.319.1 |
pseEntryA set of objects that display and control the Main power of a PSE. PseEntry .1.3.6.1.4.1.3902.3.319.1.1 |
pseGroupIndexThis variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethMainPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack. Integer32 .1.3.6.1.4.1.3902.3.319.1.1.1 |
overTemperatureAutoRecoverydisable (0) An group which can not provide the overtemperature auto-recovery functions. enable(1) An group which can provide the overtemperature auto-recovery functions.rw Enumeration .1.3.6.1.4.1.3902.3.319.1.1.2 |
psePeakPowerPoe peak-power.ro DisplayString UNITS "Watts" .1.3.6.1.4.1.3902.3.319.1.1.3 |
psePeakPowerTimepeak-power time.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.319.1.1.4 |
pseCurrentTemperaturePoe current temperature.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.319.1.1.5 |
pseFirmwareVersionPoe firmware version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.319.1.1.6 |
pseCriticalPowerPoe critical-power.ro DisplayString UNITS "Watts" .1.3.6.1.4.1.3902.3.319.1.1.7 |
portTableA table of objects that display and control the power characteristics of power Ethernet ports on a Power Source Entity (PSE) device. This group will be implemented in managed power Ethernet switches and mid-span devices. Values of all read-write objects in this table are persistent at restart/reboot. SEQUENCE OF PortEntry .1.3.6.1.4.1.3902.3.319.2 |
portEntryA set of objects that display and control the power characteristics of a power Ethernet PSE port. PortEntry .1.3.6.1.4.1.3902.3.319.2.1 |
portEntryGroupIndexThis variable uniquely identifies the group to which power Ethernet PSE is connected. Group means (box in the stack, module in a rack) and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethPsePortGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in a rack. Integer32 .1.3.6.1.4.1.3902.3.319.2.1.1 |
portEntryPortIndexThis variable uniquely identifies the power Ethernet PSE port within group pethPsePortGroupIndex to which the power Ethernet PSE entry is connected. Integer32 .1.3.6.1.4.1.3902.3.319.2.1.2 |
interfaceCurrentPowerThe current power of the PSE port expressed in Watts.ro DisplayString UNITS "Watts" .1.3.6.1.4.1.3902.3.319.2.1.3 |
interfaceAvgPowerThe average power of the PSE port expressed in Watts.ro DisplayString UNITS "Watts" .1.3.6.1.4.1.3902.3.319.2.1.4 |
interfacePeakPowerThe peak power of the PSE port expressed in Watts.ro DisplayString UNITS "Watts" .1.3.6.1.4.1.3902.3.319.2.1.5 |
interfacepeakPowerTimeThe interface peak Power Time.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3902.3.319.2.1.6 |
enhancedModeenable (0) An interface which can provide the enhanced mode. disable(1) An interface which can not provide the enhanced mode.rw Enumeration .1.3.6.1.4.1.3902.3.319.2.1.7 |
pdMaxPowerThe max poe pd power: 15.4(0) 15.4W 4.0(1), 4.0W 7.0(2), 7.0W ext.18(3), 18W ext.27(4), 27W ext.30(5) 30Wrw Enumeration .1.3.6.1.4.1.3902.3.319.2.1.8 |