ZXR10-IP-IF-MIB
ZXROS v4.6.02 Interfaces config MIB
Main OID:
zxr10IPIfMIB.1.3.6.1.4.1.3902.3.103.1
16
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
16 total| Object Name |
|---|
zxr10IPIfMIBZXROS v4.6.02 Interfaces config MIB MODULE-IDENTITY .1.3.6.1.4.1.3902.3.103.1 |
zxr10IPIfMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3.103.1.1 |
zxr10IPAddressConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.3902.3.103.1.1.1 |
zxr10IPAddrTableIp address config table. SEQUENCE OF Zxr10IPAddrEntry .1.3.6.1.4.1.3902.3.103.1.1.1.1 |
zxr10IPAddrEntry Zxr10IPAddrEntry .1.3.6.1.4.1.3902.3.103.1.1.1.1.1 |
zxr10IPAddrPrimaryIpThe main Ip address on this interfacerw IpAddress .1.3.6.1.4.1.3902.3.103.1.1.1.1.1.1 |
zxr10IPAddrPrimaryIpMaskThe mask of primary Ip address on this interfacerw IpAddress .1.3.6.1.4.1.3902.3.103.1.1.1.1.1.2 |
zxr10IPAddrBroadcastThe Broadcast address on this interfacerw IpAddress .1.3.6.1.4.1.3902.3.103.1.1.1.1.1.3 |
zxr10IPAddrRowStatusThis object is used to manage creation and deletion of rows
in this table.
zxr10IpAddrRowStatus must be set to 'creatAndGo' to create
an entry and set to 'destroy' to delete an entry.
The value in any column may be modified any time even the
value of this entry rowStatus object is 'active'.
Caution has to be taken before destroying any entry.
Example: Need to change the IP address of an interface,
which provides sole network connectivity.
This has to be done by destroying the entry and creating
a new one. The device would loose network connectivity
after the entry is destroyed. In this case, the destroy
of the old entry and the creation on the new entry
should be packed in the same PDU.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3902.3.103.1.1.1.1.1.4 |
zxr10IPAddrIfNameInterface namero DisplayString .1.3.6.1.4.1.3902.3.103.1.1.1.1.1.5 |
zxr10IPSecondaryAddrTableSecondary Ip address config table. SEQUENCE OF Zxr10IPSecondaryAddrEnry .1.3.6.1.4.1.3902.3.103.1.1.1.2 |
zxr10IPSecondaryAddrEnry Zxr10IPSecondaryAddrEnry .1.3.6.1.4.1.3902.3.103.1.1.1.2.1 |
zxr10IPSecondaryAddrSecondary Ip address on this interfacerw IpAddress .1.3.6.1.4.1.3902.3.103.1.1.1.2.1.1 |
zxr10IPSecondaryAddrMaskSecondary Ip mask on this interfacerw IpAddress .1.3.6.1.4.1.3902.3.103.1.1.1.2.1.2 |
zxr10IPSecondaryAddrRowStatusThis object is used to manage creation and deletion of rows
in this table.
zxr10SecondaryIpAddrRowStatus must be set to 'creatAndGo' to create
an entry and set to 'destroy' to delete an entry.
The value in any column may be modified any time even the
value of this entry rowStatus object is 'active'.
Caution has to be taken before destroying any entry.
Example: Need to change the IP address of an interface,
which provides sole network connectivity.
This has to be done by destroying the entry and creating
a new one. The device would loose network connectivity
after the entry is destroyed. In this case, the destroy
of the old entry and the creation on the new entry
should be packed in the same PDU.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3902.3.103.1.1.1.2.1.3 |
zxr10IPSecondaryIfNameInterface namero DisplayString .1.3.6.1.4.1.3902.3.103.1.1.1.2.1.4 |