ZTE-AN-CHASSIS-MIB
AI MIB Summary
The ZTE-AN-CHASSIS-MIB enables SNMP-based monitoring and management of physical chassis components within ZTE Access Node equipment, specifically tracking hardware status, port states, and environmental metrics such as temperature and power supply conditions.
This MIB defines zte Access Node chassis managed objects.
Main OID:
zxAnChassisMib.1.3.6.1.4.1.3902.1082.10.1
115
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
115 total| Object Name |
|---|
zxAnChassisMibThis MIB defines zte Access Node chassis managed objects. MODULE-IDENTITY .1.3.6.1.4.1.3902.1082.10.1 |
zxAnChassisGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.1.1 |
zxAnChassisSysRebootReboot system.rw Enumeration .1.3.6.1.4.1.3902.1082.10.1.1.1 |
zxAnChassisSysLastRebootReasonIt indicates device coldstart or warmstart reason byCli(1) warmstart by command, byNms(2) warmstart by network management, byWatchdog(3) warmstart by watchdog, byPowerOff(4) coldstart by poweroff, byProcessSuspended(6) warmstart by process suspended, unknown (99) restart by other reason.ro Enumeration .1.3.6.1.4.1.3902.1082.10.1.1.2 |
zxAnChassisSysLastSwapReasonLast swap request,such as force,plug-out or others. forced(1) swap by command or network management, cardOffline(2) swap by the main control board poweroff or pull out, reset(3) swap by the main control board reset self, cardDown(99) swap by other reason.ro Enumeration .1.3.6.1.4.1.3902.1082.10.1.1.3 |
zxAnChassisPnpModeconfig Ne card PNP mode,PNP mode means when card on shelf, then this card can use without add itrw Enumeration .1.3.6.1.4.1.3902.1082.10.1.1.4 |
zxAnChassisObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.1.2 |
zxAnRackTableThis table includes the enable or disable plug and play of the rack. SEQUENCE OF ZxAnRackEntry .1.3.6.1.4.1.3902.1082.10.1.2.2 |
zxAnRackEntryAn entry in zxAnRackTable. ZxAnRackEntry .1.3.6.1.4.1.3902.1082.10.1.2.2.1 |
zxAnRackThe range of zxAnRack is 1~1 for DT Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.2.1.1 |
zxAnRackActualTypeThis MIB is defined for actual rack type.ro Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.2.1.2 |
zxAnRackConfTypeThis MIB is defined for configged rack type.rw Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.2.1.3 |
zxAnRackInvSnThis MIB is defined for serial number of this rack. it is used by inventroy management.rw DisplayString ( SIZE ( 0 .. 32 ) ) .1.3.6.1.4.1.3902.1082.10.1.2.2.1.4 |
zxAnRackRowStatusThe status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnRackConfType have been set. To delete a row in this table, a manager must set this object to destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.10.1.2.2.1.50 |
zxAnShelfTableThis table includes the enable or disable plug and play of the shelf. SEQUENCE OF ZxAnShelfEntry .1.3.6.1.4.1.3902.1082.10.1.2.3 |
zxAnShelfEntryAn entry in zxAnShelfTable. ZxAnShelfEntry .1.3.6.1.4.1.3902.1082.10.1.2.3.1 |
zxAnShelfThe range of zxAnShelf is 1~1 for DT Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.3.1.1 |
zxAnShelfHardwareVersionThe hard driver on the shelf.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.10.1.2.3.1.2 |
zxAnShelfActualTypeThe actual shelf type.ro Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.3.1.3 |
zxAnShelfConfTypeThe configuration shelf type.rw Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.3.1.4 |
zxAnShelfInvSnThe serial number of this shelf. it is used by inventroy management.rw DisplayString ( SIZE ( 0 .. 32 ) ) .1.3.6.1.4.1.3902.1082.10.1.2.3.1.5 |
zxAnShelfCleiCodeThe CLEI code of this Shelf. it is used by inventroy management.Please reference http://www.commonlanguage.com to get knowledge about CLEI code.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.10.1.2.3.1.6 |
zxAnLogicShelfNoThe logic Shelf numberrw Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.3.1.7 |
zxAnShelfRowStatusThe status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnShelfConfType have been set. To delete a row in this table, a manager must set this object to destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.10.1.2.3.1.50 |
zxAnCardTableThis table includes the enable or disable plug and play of the Card. SEQUENCE OF ZxAnCardEntry .1.3.6.1.4.1.3902.1082.10.1.2.4 |
zxAnCardEntryAn entry in zxAnCardTable. ZxAnCardEntry .1.3.6.1.4.1.3902.1082.10.1.2.4.1 |
zxAnSlotThe range of zxAnSlot is 0~20 for DT IEC-SHELF, and the range of zxAnSlot is 0~22 for DT ETSI-SHELF Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.4.1.1 |
zxAnCardConfMainTypeThe main card type to config on the slot. Main card type indicates the category of hardware, such as 64-ports adsl card,4-ports ethernet card.rw Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.4.1.2 |
zxAnCardActualMainTypeThe actually main card type on the slot.ro Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.4.1.3 |
zxAnCardActualTypeThe actually card type on the slot. Card type indicates the type of detailed hardware,such as ATUGA and ATUGB, they'er all 32-ports Adsl card and they all provide general Adsl service,but they have different chips. NOTE: The value of this variable MUST abide by ZTE'S discipline for card naming.And It MUST capital letters.ro DisplayString ( SIZE ( 0 .. 32 ) ) .1.3.6.1.4.1.3902.1082.10.1.2.4.1.4 |
zxAnCardOperStatusThis MIB is defined for the card status. inService(1) -- card plugged in,running normally and service is being provided normally. notInService(2)-- card plugged in,running normally but service is stopped. hwOnline(3) -- card plugged in and card communication is ok, but software isn't running now. hwOffline(4) -- card is pulled out or card not plugged in, but added to agent's database only. configuring(5) -- card plugged in, but it is configuring. configFailed(6)-- card plugged in, but configuration failed. typeMismatch(7)-- card plugged in, but it's type is mismatch. deactived(8) -- card plugged in, but it is deactivated by a manager. faulty(9) -- fault occurs when card is running normally invalid(10) -- invalid card instance, such as adding card failed. noPower(11) -- power card plugged in, but no power input. unauthorized(12) -- card plugged in, but it's bugsell and the software of the card doesn't run now. powerSaving(34) -- card plugged in, but it's power saving status.ro Enumeration .1.3.6.1.4.1.3902.1082.10.1.2.4.1.5 |
zxAnCardAdminStatusThis MIB is defined for the card admin status on the card. For example:reset(1),switch(2) reset(1) -- reset the card. switch(2) -- switch card between master and slave status. stopService(3) -- stop service normally. active(4) -- activate this card and enable the service. deactive(5) -- deactivate this card and disable the service forcedly.rw Enumeration .1.3.6.1.4.1.3902.1082.10.1.2.4.1.6 |
zxAnCardPortNumsThe numbers of physical port which contained in this board. If the board has no this attribute,it should be 0.ro Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.4.1.7 |
zxAnCardActivePortNumsThe numbers of actived physical port which contained in this board. If the board has no this attribute,it should be 0.ro Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.4.1.8 |
zxAnCardCpuLoadThe current CPU load of this board.If this board has more than one CPU,the average value is allowed. If the board has no this attribute,it should be 0.ro Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.4.1.9 |
zxAnCardCpuLoadThresholdThe CPU load threshold of this board.When zxAnCardCpuLoad is higher than zxAnCardCpuLoadThreshold,zxAnChassisCardCpuOverloadAlm trap should be generated by agent.rw Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.4.1.10 |
zxAnCardMemUsageThe current memory usage of this board. If the board has no this attribute,it should be 0.ro Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.4.1.11 |
zxAnCardMemUsageThresholdThe memory usage threshold of this board. When zxAnCardMemUsage is higher than zxAnCardMemUsageThreshold,zxAnChassisCardMemOverloadAlm trap should be generated by agent.rw Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.4.1.12 |
zxAnCardStandbyStatusThe card operation status on the card.ro Enumeration .1.3.6.1.4.1.3902.1082.10.1.2.4.1.13 |
zxAnCardInvSnThe serial number of this card. it is used by inventroy management.rw DisplayString ( SIZE ( 0 .. 32 ) ) .1.3.6.1.4.1.3902.1082.10.1.2.4.1.14 |
zxAnCardCleiCodeThe CLEI code of this card. it is used by inventroy management.Please reference http://www.commonlanguage.com to get knowledge about CLEI code.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.10.1.2.4.1.15 |
zxAnCardAccessoriesTypeThe accessories type of this card, such as splitter of DSLAM,the value of this variable should be the type of hardware, eg. PNVTA,PNVNP,PNVNA of ZXDSL9800's splitter.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.10.1.2.4.1.16 |
zxAnCardAccessoriesOperStatusThe operational status of the card accessories.ro Enumeration .1.3.6.1.4.1.3902.1082.10.1.2.4.1.17 |
zxAnCardMemSizeThe current memory size of this board. If the board has no this attribute,it should be 0.ro Integer32 UNITS "MB" .1.3.6.1.4.1.3902.1082.10.1.2.4.1.19 |
zxAnCardAvailableStorageSizeThe available storage space size in this card.ro Integer32 UNITS "KB" .1.3.6.1.4.1.3902.1082.10.1.2.4.1.21 |
zxAnCardTotalStorageSizeThe total storage space size in this card.ro Integer32 UNITS "KB" .1.3.6.1.4.1.3902.1082.10.1.2.4.1.22 |
zxAnCardHardwareVersionThe hard version in this card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.10.1.2.4.1.23 |
zxAnCardPowerSavingEnableEnable or disable the power saving of the card.rw Enumeration .1.3.6.1.4.1.3902.1082.10.1.2.4.1.24 |
zxAnCardLastStartupTimeThe last startup time of the card.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.10.1.2.4.1.25 |
zxAnCardCpldVersionThe CPLD version in this card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.10.1.2.4.1.26 |
zxAnCardFirmwareVersionThe firmware version in this card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.10.1.2.4.1.27 |
zxAnCardOtherFirmwareVersionsThe other firmware versions in this card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.10.1.2.4.1.28 |
zxAnCardRowStatusThe status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnExampleFunc2Xxx1Var1 and zxAnExampleFunc2Xxx1Var2 have been set. To delete a row in this table, a manager must sets this object to destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.10.1.2.4.1.50 |
zxAnSubcardTableThis table includes the enable or disable plug and play of the subcard. SEQUENCE OF ZxAnSubcardEntry .1.3.6.1.4.1.3902.1082.10.1.2.5 |
zxAnSubcardEntryAn entry in zxAnSubcardTable. ZxAnSubcardEntry .1.3.6.1.4.1.3902.1082.10.1.2.5.1 |
zxAnSubcard Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.5.1.1 |
zxAnSubcardConfMainTypeThe main subcard type to config on the slot. Main subcard type indicates the category of hardware,such as 4-ports ethernet subcard.rw Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.5.1.2 |
zxAnSubcardActualMainTypeThe actually main subcard type on the slot.ro Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.5.1.3 |
zxAnSubcardActualTypeThe actually subcard type on the slot. It indicates the type of detailed hardware. NOTE: The value of this variable MUST abide by ZTE'S discipline for card naming.And It MUST capital letters.ro DisplayString ( SIZE ( 0 .. 32 ) ) .1.3.6.1.4.1.3902.1082.10.1.2.5.1.4 |
zxAnSubcardOperStatusThis MIB is defined for the sub card status on the card. inService(1) -- card pluged in,running normally and service is being provided normally. notInService(2)-- card pluged in,running normally but service is stopped. hwOffline(3) -- card not pluged in,but added to agent's database only hwOnline(4) -- card pluged in,but software isn't running now. configuring(5) -- card pluged in,but it is configuring configFailed(6)-- card pluged in,but configuration failed typeMismatch(7)-- card pluged in,but it's type is mismatch deactived(8) -- card pluged in,but it is deactivated by a manager faulty(9) -- fault occurs when card is running normally invalid(10) -- invalid card instance,such as adding card failed.ro Enumeration .1.3.6.1.4.1.3902.1082.10.1.2.5.1.5 |
zxAnSubcardAdminStatusThis MIB is defined for the card admin status on the card. For example:reset(1),switch(2) reset(1) -- reset the card. switch(2) -- switch card between master and slave status. stopService(3) -- stop service normally. active(4) -- activate this card and enable the service. deactive(5) -- deactivate this card and disable the service forcedly.rw Enumeration .1.3.6.1.4.1.3902.1082.10.1.2.5.1.6 |
zxAnSubcardPortNumsThe numbers of physical port which contained in this board. If the board has no this attribute,it should be 0.ro Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.5.1.7 |
zxAnSubcardActivePortNumsThe numbers of actived physical port which contained in this board. If the board has no this attribute,it should be 0.ro Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.5.1.8 |
zxAnSubcardCpuLoadThe current CPU load of this board.If this board has more than one CPU,the average value is allowed. If the board has no this attribute,it should be 0.ro Integer32 UNITS "percent" .1.3.6.1.4.1.3902.1082.10.1.2.5.1.9 |
zxAnSubcardMemUsageThe current memory usage of this board. If the board has no this attribute,it should be 0.ro Integer32 UNITS "percent" .1.3.6.1.4.1.3902.1082.10.1.2.5.1.10 |
zxAnSubcardInvSnThe serial number of this subcard. it is used by inventroy management.rw DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.10.1.2.5.1.11 |
zxAnSubcardCleiCodeThe CLEI code of this card. it is used by inventroy management.Please reference http://www.commonlanguage.com to get knowledge about CLEI code.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.10.1.2.5.1.12 |
zxAnSubcardMemSizeThe current memory size of this sub card. If the board has no this attribute,it should be 0.ro Integer32 UNITS "MB" .1.3.6.1.4.1.3902.1082.10.1.2.5.1.13 |
zxAnSubcardHardwareVersionThe hard version in this sub card.ro DisplayString ( SIZE ( 0 .. 64 ) ) .1.3.6.1.4.1.3902.1082.10.1.2.5.1.14 |
zxAnSubcardRowStatusThe row status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3902.1082.10.1.2.5.1.50 |
zxAnCardCpuTableThis table includes the CPU information of the card. SEQUENCE OF ZxAnCardCpuEntry .1.3.6.1.4.1.3902.1082.10.1.2.6 |
zxAnCardCpuEntryAn entry in zxAnCardCpuTable. ZxAnCardCpuEntry .1.3.6.1.4.1.3902.1082.10.1.2.6.1 |
zxAnCardCpuIdThe CPU ID of the card. Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.6.1.1 |
zxAnCardCpuUsageThe CPU usage of the zxAnCardCpuId.ro Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.6.1.2 |
zxAnStorageDeviceTableThis table includes file storage devices information. SEQUENCE OF ZxAnStorageDeviceEntry .1.3.6.1.4.1.3902.1082.10.1.2.7 |
zxAnStorageDeviceEntryAn entry in zxAnStorageDeviceTable. ZxAnStorageDeviceEntry .1.3.6.1.4.1.3902.1082.10.1.2.7.1 |
zxAnStorageDeviceIdThe ID of the storage device. The numbering rule is: 1: Flash1, 2: SD card, 3: RAM card, 4: Flash2, ... Integer32 .1.3.6.1.4.1.3902.1082.10.1.2.7.1.1 |
zxAnStorageDeviceAccessEnableEnables and disables the access permissions to the storage device. If the storage device is disabled, the storage device can't be read or written.rw Enumeration .1.3.6.1.4.1.3902.1082.10.1.2.7.1.2 |
zxAnStorageDeviceOperStatusThe operational status of the storage device.ro Enumeration .1.3.6.1.4.1.3902.1082.10.1.2.7.1.3 |
zxAnStorageDeviceAccessStatusThe access status of the storage device. idle(1): the storage device can be read or written. busy(2): the storage device is being read or written. locked(3): the storage device can be read, but can't be written. unknown(255): unknown.ro Enumeration .1.3.6.1.4.1.3902.1082.10.1.2.7.1.4 |
zxAnStorageDeviceTotalSpaceThe total space of the storage device.ro Integer32 UNITS "MB" .1.3.6.1.4.1.3902.1082.10.1.2.7.1.5 |
zxAnStorageDeviceAvailableSpaceThe available space of the storage device.ro Integer32 UNITS "MB" .1.3.6.1.4.1.3902.1082.10.1.2.7.1.6 |
zxAnChassisNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.1.3 |
zxAnChassisSysTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.1.3.1 |
zxAnChassisCtrlCardSwappedAlmA zxAnChassisCtrlCardSwappedAlm trap indicates that the main control card has swapped to slave card. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.1.2 |
zxAnChassisCtrlCardSwappedClrA zxAnChassisCtrlCardSwappedClr trap indicates that the main control card swapped trap has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.1.3 |
zxAnChassisCardTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.1.3.2 |
zxAnChassisCardOfflineA zxAnChassisCardOffline trap is sent when the agent has detected that the configured card has plugged out. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.2.1 |
zxAnChassisCardOnlineA zxAnChassisCardOnline trap is sent when the agent has detected that the configured card has plugged in. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.2.2 |
zxAnChassisCardTypeMismatchAlmA zxAnChassisCardTypeMismatchAlm trap is sent when the agent has detected that the card has plugged in ,but zxAnCardConfMainType is not same as zxAnCardActualType. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.2.3 |
zxAnChassisCardTypeMismatchClrA zxAnChassisCardTypeMismatchClr trap is sent when the agent has detected that the card has plugged in and zxAnCardConfMainType is same as zxAnCardActualType. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.2.4 |
zxAnChassisCardNotRunningAlmA zxAnChassisCardNotRunningAlm trap is sent when the agent has detected that the card has plugged in and configured, but it is not running. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.2.5 |
zxAnChassisCardNotRunningClrA zxAnChassisCardNotRunningClr trap is sent when the agent has detected that the card is inservice. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.2.6 |
zxAnChassisCardNotConfiguredAlmA zxAnEquipCardNotConfigured trap is sent when the agent has detected that the card has plugged in but not configured. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.2.7 |
zxAnChassisCardNotConfiguredClrA zxAnChassisCardNotConfiguredClr trap is sent when the agent has detected that the card has plugged in and configured. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.2.8 |
zxAnChassisCardCpuOverloadAlmIt indicates that the agent has detected that the zxAnChassisCardCPULoad object of one card has exceeded the configured threshhold value of zxAnCardCpuLoadThreshhold. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.2.20 |
zxAnChassisCardCpuOverloadClrIt indicates that the agent has detected that the zxAnChassisCardCPULoad object of one card has less than the configured threshhold value of zxAnCardCpuLoadThreshhold. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.2.21 |
zxAnChassisCardMemOverloadAlmIt indicates that the agent has detected that the zxAnChassisCardMemUsage object of one card has exceeded the configured threshhold value of zxAnCardMemUsageThreshhold. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.2.22 |
zxAnChassisCardMemOverloadClrIt indicates that the agent has detected that the zxAnChassisCardMemUsage object of one card has less than the configured threshhold value of zxAnCardMemUsageThreshhold. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.2.23 |
zxAnChassisCardResourceAddedA zxAnChassisCardResourceAdded trap is sent when the agent has detected that the card has come into inService status. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.2.24 |
zxAnChassisCardResourceDeletedA zxAnChassisCardResourceDeleted trap is sent when the agent has detected that the card has been deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.2.25 |
zxAnChassisSubcardTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.1.3.3 |
zxAnChassisSubcardDownIt indicates that the agent has detected that the subcard operational status is abnormal. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.3.1 |
zxAnChassisSubcardUpIt indicates that the agent has detected that the subcard has been online and come into inservice status. NOTIFICATION-TYPE .1.3.6.1.4.1.3902.1082.10.1.3.3.2 |
zxAnChassisConformance OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.1.4 |
zxAnChassisCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.1.4.1 |
zxAnChassisComplianceThe compliance statement for SNMP entities which implement the ZTE-AN-CHASSIS-MIB. Unknown .1.3.6.1.4.1.3902.1082.10.1.4.1.1 |
zxAnChassisGroups OBJECT IDENTIFIER .1.3.6.1.4.1.3902.1082.10.1.4.2 |
zxAnChassisSysMgmtGroupThe notifications which indicate reboot,set-pnp and last reboot or swap reason. Unknown .1.3.6.1.4.1.3902.1082.10.1.4.2.1 |
zxAnChassisRackMgmtGroupThe collection of objects which are used to represent rack information and to manage rack. Unknown .1.3.6.1.4.1.3902.1082.10.1.4.2.2 |
zxAnChassisShelfMgmtGroupThe collection of objects which are used to represent shelf information and to manage shelf. Unknown .1.3.6.1.4.1.3902.1082.10.1.4.2.3 |
zxAnChassisCardMgmtGroupThe collection of objects which are used to represent card information and to manage card. Unknown .1.3.6.1.4.1.3902.1082.10.1.4.2.4 |
zxAnChassisSubCardMgmtGroupThe collection of objects which are used to represent subcard information and to manage subcard. Unknown .1.3.6.1.4.1.3902.1082.10.1.4.2.5 |
zxAnChassisSysTrapsGroupThe notifications which indicate swap information. Unknown .1.3.6.1.4.1.3902.1082.10.1.4.2.6 |
zxAnChassisCardTrapsGroupThe notifications which indicate specific changes, include card status, card cpu load status and memory load status. Unknown .1.3.6.1.4.1.3902.1082.10.1.4.2.7 |