ZHONE-Wan-MIB
AI MIB Summary
The ZHONE-Wan-MIB module enables configuration and monitoring of Zhone Technologies WAN interface line parameters, specifically managing CSU and DSX operational modes for T1/E1 circuit termination.
The zhone WAN MIB for configuration of the line. This mib handles CSU and DSX mode.
Main OID:
zhoneDs1Mib.1.3.6.1.4.1.5504.5.2.1
137
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
137 total| Object Name |
|---|
zhoneDs1MibThe zhone WAN MIB for configuration of the line. This mib handles CSU and DSX mode. MODULE-IDENTITY .1.3.6.1.4.1.5504.5.2.1 |
zhoneDs1TableThe DS1 Configuration table. Statistical information not supported on BAN in this release. SEQUENCE OF ZhoneDs1Entry .1.3.6.1.4.1.5504.5.2.2 |
zhoneDs1EntryAn entry in the DS1 Configuration table. ZhoneDs1Entry .1.3.6.1.4.1.5504.5.2.2.1 |
zhoneLineIndexThis object should be made equal to ifIndex. Making the object equal to ifIndex allows proper use of ifStackTable and ds0/ds0bundle mibs. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.5504.5.2.2.1.1 |
zhoneTimeElapsedThe number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.5504.5.2.2.1.2 |
zhoneValidIntervalsThe numberof previous near end intervals for which data was collected. The value will be 96 unless the interface was brouht online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been oline. In the case where the agent is a proxxy, it is possible that some intervals are unavailable. In this case, the interval is the maximum interval number for which data is available.ro INTEGER .1.3.6.1.4.1.5504.5.2.2.1.3 |
zhoneLineTypeThis variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: other(1) (not supported in this release) esf(2) Extended SuperFrame DS1 (T1.107) d4(3) AT&T D4 format DS1 (T1.107) slc96(4) (not supported in this release) e1(5) ITU-T Recommendation G.704 (not supported in this release) e1Crc(6) ITU-T Recommendation G.704 (not supported in this release) e1Mf(7) G.704 multiframing enabled e1CrcMf(8) G.704 multiframing enabled and crc enabled e1Unframed(9) E1 with no framing ds1Unframed(10) Ds1 with no framing For clarification, the capacity for each E1 type is as listed below: e1 or e1Crc - e1, with framing, no signalling = 31 x 64k = 1984k e1Mf or e1CrcMf - e1, with framing, signalling = 30 x 64k = 1920k For further information See ITU-T Recomm G.704 Default is set to esf for T1 platforms and e1CrcMf for E1 platforms. BAN E1: esf,d4 T1:e1,e1mf,e1crcmfrw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.4 |
zhoneLineCodingThis variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. jbzs refers the Jammed Bit Zero Suppression, in which the AT&T specification of at least one pulse every 8 bit periods is literally implemented by forcing a pulse in bit 8 of each channel. Thus, only seven bits per channel, or 1.344 Mbps, is available for data. b8zs refers to the use of a specified pattern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. ANSI Clear Channels may use zbtsi, or Zero Byte Time Slot Interchange. E1 links, with or without CRC, use hdb3 or ami. ami refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density requirements, such as inverting HDLC data. b6zs refers to the user of a specifed pattern of normal bits and bipolar violations which are used to replace a sequence of six zero bits. Used for DS2. Default is set to b8zs for T1 platforms and hdb3 for E1. TITLE: AVAILABILITY: jbzs(1) (not supported in this release) b8zs(2) (not supported for e1 lineTypes) hdb3(3) (supported for e1 lineTypes) zbtsi(4) (not supported in this release) ami(5) other(6) (not supported in this release) b6zs(7) (not supported in this rele BAN E1: hdb3,ami; T1: b8zs,amirw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.5 |
zhoneSendCodeThis variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the interface to send the code requested. The values mean: SendNoCode sending looped or normal data sendLineCode sending a request for a line loopback T1 related sendCodes ------------------------------------------ sendPayloadCode sending a request for a payload loopback sendResetCode sending a loopback termination request sendQRSSPattern sending a Quasi-Random Signal (QRS) test pattern send511Pattern sending a 511 bit fixed test pattern send3in24Pattern sending a fixed test pattern of 3 bits set in 24 sendOtherTestPattern sending a test pattern other than those described by this object send2047Pattern, sending 2047 test pattern. send1in2Pattern, sending alternate one , zero pattern. sendInbandCode, sending inband loopback command. sendInbandCodeOff, sending inband loopback off command. sendLineCodeOff, sending line loopback command. sendPayloadCodeOff, sending payload loopback command. E1 related send codes ------------------------------------------ send2ToPower9Minus1Pattern refer to O.153 send2ToPower11Minus1Pattern refer to O.152 and O.153 send2ToPower15Minus1Pattern refer to O.151 send2ToPower20Minus1Pattern refer to O.153 QRSS bit = 1 send2ToPower23Minus1Pattern refer to O.151 Only sendNoCode is supported on E1 platforms in this release. N/A for BANrw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.6 |
zhoneCircuitIdentifierThis variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.rw ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.5.2.2.1.7 |
zhoneLoopbackConfigThis variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in response to a requested loopback state that the interface does not support. The values mean: noLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. lineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. localLoop The transmitted signal at this interface is looped back and received by the same interface. What is transmitted onto the line is product dependent. payloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function.rw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.8 |
zhoneLineStatusThis variable indicates the Line Status of the interface. It contains loopback, failure, received 'alarm' and transmitted 'alarms information. If the zhloopbackState bit is set, the loopback in effect can be determined from the loopbackConfig object. The various bit positions are: noAlarm(1) No alarm present rcvFarEndLOF(2) Far end LOF (a.k.a., Yellow Alarm) xmtFarEndLOF(4) Near end sending LOF Indication rcvAIS(8) Far end sending AIS xmtAIS(16) Near end sending AIS lossOfFrame(32 Near end LOF (a.k.a., Red Alarm) lossOfSignal(64) Near end Loss Of Signal loopbackState(128) Near end is looped ts16AIS(256) E1 TS16 AIS rcvFarEndLOMF(512) Far End Sending TS16 LOMF xmtFarEndLOMF(1024) Near End Sending TS16 LOMF rcvTestCode(2048) Near End detects a test code otherFailure(4096) any line status not defined here unavailSigState(8192) Near End in Unavailable Signal State netEquipOOS(16384) Carrier Equipment Out of Servicero INTEGER .1.3.6.1.4.1.5504.5.2.2.1.9 |
zhoneSignalMode'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that DS1 Robbed Bit Sig- naling is in use. 'bitOriented' indicates that E1 Channel Asso- ciated Signaling is in use. 'messageOriented' indicates that Common Chan- nel Signaling is in use either on channel 16 of an E1 link or channel 24 of a DS1. Default is set to robbedBit for T1 platforms and messageOriented for E1. TITLE: AVAILABILITY: none(1) robbedBit(2) (not supported for E1 lineTypes) bitOriented(3) (only supported for E1 lineTypes) messageOriented(4) has the same effect as none other(5) (not supported in this release) N/A For BANrw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.10 |
zhoneTransmitClockSourceReflects the source of Transmit Clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. Only set if this DS1 has zhoneClockSourceEligibility equal to 'eligible' and the state of that ds1 is 'up' and the ds1 resource provider decided this DS1 is to provide the transmit clock for all the DS1s. Only one DS1 will have this set per platform. 'localTiming' indicates that a local clock source is used or when an external clock is attached to the box containing the interface. 'throughTiming' indicates that recovered receive clock from another interface is used as the transmit clock. Example: If a DS1 other than this one reflects 'loopTiming', this DS1 will use that DS1 as its transmit clock. Therefore this DS1 reflects 'throughTiming'. 'sonetThroughTiming' indecates that recovered receive clock from the far-side sonet node is used as the transmit clock.rw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.11 |
zhoneFdl'other' indicates that a protocol other than one following is used. 'ansiT1403' refers to the FDL exchange recommended by ANSI. 'att54016' refers to ESF FDL exchanges. 'fdlNone' indicates that the device does not use the FDL. TITLE: AVAILABILITY: other(1) (not supported in this release) ansiT1403(2) (not supported in this release) att54016(3) (not supported in this release) fdlNone(4)rw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.12 |
zhoneInvalidIntervalsThe number of intervals in the range from 0 to zwValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.5504.5.2.2.1.13 |
zhoneDsxLineLengthThe length of the dsx wan is in feets. This objects provides information for line build out circuitry. The valid range is: 'dsx0(1)' It is 0 feet for the line build out (LBO) and the default setting. 'dsx133(2)'It is 133 feets for the LBO. 'dsx266(3)'It is 266 feets for the LBO. 'dsx399(4)'It is 399 feets for the LBO. 'dsx533(5)'It is 533 feets for the LBO. 'dsx655(6)'It is 655 feets for the LBO. This field is not used for E1 platforms.rw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.14 |
zhoneLineStatusLastChangeThe value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5504.5.2.2.1.15 |
zhoneLineStatusChangeTrapEnableIndicates whether zhoneLineStatusChange traps should be generated for this interface.rw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.16 |
zhoneLoopbackStatusThis variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a local manager and remotely from the far end. This status is combination of loopbackConfig, and sendCode options as this status represents the local as well as far loopbacks. The various positions are: noLoopback(1) nearEndLineLoopback(2) nearEndOtherLoopback(4) nearEndLocalLoopback(8) farEndPayloadLoopback(16) farEndLineLoopback(32)ro INTEGER .1.3.6.1.4.1.5504.5.2.2.1.17 |
zhoneDs1ChannelNumberThis variable represents the channel number of the DS1/E1 on its parent Ds2/E2 or DS3/E3. A value of 0 indicated this DS1/E1 does not have a parent DS3/E3.ro INTEGER .1.3.6.1.4.1.5504.5.2.2.1.18 |
zhoneChannelizationIndicates whether this ds1/e1 is channelized or unchannelized. The value of enabledDs0 indicates that this is a DS1 channelized into DS0s. The value of enabledDs1 indicated that this is a DS2 channelized into DS1s. Setting this value will cause the creation or deletion of entries in the ifTable for the DS0s that are within the DS1. TITLE: AVAILABILITY: disabled(1) (not supported in this release) enabledDs0(2) enabledDs1(3) (not supported in this release) For BAN disabledrw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.19 |
zhoneDs1Mode'other' wan is not in csu or dsx mode. 'dsx' T1 wan is in dsx mode. 'csu' T1 wan is in csu mode. Default setting is 'csu' for T1 platforms and 'other' for E1. TITLE: AVAILABILITY: other(1) dsx(2) csu(3) BAN E1:other; T1:csu,dsxrw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.20 |
zhoneCsuLineLength'csu00' it is 0 dB for csu ds1 wan for line build out. 'csu75' it is -7.5 dB for line build out. 'csu150' it is -15.0 dB for line build out. 'csu225' it is -22.5 dB for line build out (LBO). This field is not used for E1 platforms.rw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.21 |
zhoneClockSourceEligibilityThe possible values are: (1) not-eligibile - this DS1 is not eligible to be negotiated as a possible transmit clock source (2) eligible - this DS1 may be used by the DS1 Line resource provider in negotiation as a possible transmit clock source for all DS1s. For BAN DS1, this field is not writeable and will default to eligible.rw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.22 |
zhoneCellScrambleThis field describes the enabled status of the Ds1 Cell Scramble mode. If this field is true(1) then Scramble mode is enabled, if this field is false(2) scramble mode is disable..rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.2.2.1.23 |
zhoneCosetPolynomialThis field describes the enabled status of the Coset Polynomial mode. If this field is true(1) then Coset Polynomial mode is enabled, if this field is false(2) Coset Polynomial mode is disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.2.2.1.24 |
zhoneDs1ProtocolEmulationIndicates whether the device is acting as Network-side or CPE with respect to this DS1. For example, if the system is configured with a PBX on the network side of the device, then the device will act as a CPE with respect to the DS1. If the device is on the network side of a PBX, then this leaf should be set to network, as the PBX would be acting as a CPE.rw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.25 |
zhoneDs1SignalTypeThe signaling type of the FXS interfaces within this DS1.rw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.26 |
zhoneDs1GroupIndexThe Group index this Ds1 belongs torw INTEGER .1.3.6.1.4.1.5504.5.2.2.1.27 |
zhoneDs1LinePowerEnable or disable line power for the DS1 interface.rw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.28 |
zhoneDs1TimeslotAssignmentThis table entry is a bit field indicating which timeslots in a ds1 are used (or assigned). Default for DS1 based card: 1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+0+0+0+0+0+0+0+0 Default for E1 based card: 1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+1+0.rw Bits .1.3.6.1.4.1.5504.5.2.2.1.29 |
zhoneDs1TxClockRecoveryPWE transmit clock recovery methodrwobsolete Enumeration .1.3.6.1.4.1.5504.5.2.2.1.30 |
zhoneDs1TxClockAdaptiveQualityDetermines sync drift when operating in PWE adaptive mode. Values reflect ANSI Standard T1.101 reference clock quality.rw Enumeration .1.3.6.1.4.1.5504.5.2.2.1.31 |
zhoneDs1CurrentTableThe DS1 current table contains various statistics being collected for the current 15 minute interval. Not supported on BAN in this release. SEQUENCE OF ZhoneDs1CurrentEntry .1.3.6.1.4.1.5504.5.2.3 |
zhoneDs1CurrentEntryAn entry in the DS1 Current table. ZhoneDs1CurrentEntry .1.3.6.1.4.1.5504.5.2.3.1 |
zhoneCurrentIndexThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a zhLineIndex object instance. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.5504.5.2.3.1.1 |
zhoneCurrentESsThe number of Errored Seconds.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.3.1.2 |
zhoneCurrentSESsThe number of Severely Errored Seconds.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.3.1.3 |
zhoneCurrentSEFSsThe number of Severely Errored Framing Seconds.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.3.1.4 |
zhoneCurrentUASsThe number of Unavailable Seconds.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.3.1.5 |
zhoneCurrentCSSsThe number of Controlled Slip Seconds.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.3.1.6 |
zhoneCurrentPCVsThe number of Path Coding Violations.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.3.1.7 |
zhoneCurrentLESsThe number of Line Errored Seconds.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.3.1.8 |
zhoneCurrentBESsThe number of Bursty Errored Seconds.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.3.1.9 |
zhoneCurrentDMsThe number of Degraded Minutes.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.3.1.10 |
zhoneCurrentLCVsThe number of Line Code Violations (LCVs).ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.3.1.11 |
zhoneDs1IntervalTableThe DS1 Interval Table contains various statistics collected by each DS1 Interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by zwIntervalNumber) for one specific instance (identified by zwIntervalIndex). Not supported on BAN in this release. SEQUENCE OF ZhoneDs1IntervalEntry .1.3.6.1.4.1.5504.5.2.4 |
zhoneDs1IntervalEntryAn entry in the DS1 Interval table. ZhoneDs1IntervalEntry .1.3.6.1.4.1.5504.5.2.4.1 |
zhoneIntervalIndexThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a zhLineIndex object instance. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.5504.5.2.4.1.1 |
zhoneIntervalNumberA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.ro INTEGER .1.3.6.1.4.1.5504.5.2.4.1.2 |
zhoneIntervalESsThe number of Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.4.1.3 |
zhoneIntervalSESsThe number of Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.4.1.4 |
zhoneIntervalSEFSsThe number of Severely Errored Framing Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.4.1.5 |
zhoneIntervalUASsThe number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.4.1.6 |
zhoneIntervalCSSsThe number of Controlled Slip Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.4.1.7 |
zhoneIntervalPCVsThe number of Path Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.4.1.8 |
zhoneIntervalLESsThe number of Line Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.4.1.9 |
zhoneIntervalBESsThe number of Bursty Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.4.1.10 |
zhoneIntervalDMsThe number of Degraded Minutes.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.4.1.11 |
zhoneIntervalLCVsThe number of Line Code Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.4.1.12 |
zhoneIntervalValidDataThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.2.4.1.13 |
zhoneDs1TotalTableThe DS1 Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. Not supported on BAN in this release. SEQUENCE OF ZhoneDs1TotalEntry .1.3.6.1.4.1.5504.5.2.5 |
zhoneDs1TotalEntryAn entry in the DS1 Total table. ZhoneDs1TotalEntry .1.3.6.1.4.1.5504.5.2.5.1 |
zhoneTotalIndexThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a zhLineIndex object instance. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.5504.5.2.5.1.1 |
zhoneTotalESsThe sum of Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.5.1.2 |
zhoneTotalSESsThe number of Severely Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.5.1.3 |
zhoneTotalSEFSsThe number of Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.5.1.4 |
zhoneTotalUASsThe number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.5.1.5 |
zhoneTotalCSSsThe number of Controlled Slip Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.5.1.6 |
zhoneTotalPCVsThe number of Path Coding Violations encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.5.1.7 |
zhoneTotalLESsThe number of Line Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.5.1.8 |
zhoneTotalBESsThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.5.1.9 |
zhoneTotalDMsThe number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.5.1.10 |
zhoneTotalLCVsThe number of Line Code Violations (LCVs) encountered by a DS1 interface in the current 15 minute interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.5.1.11 |
zhoneDs1FarEndCurrentTableThe DS1 Far End Current table contains various statistics being collected for the current 15 minute interval. The statistics are collected from the far end messages on the Facilities Data Link. The definitions are the same as described for the near-end information. Not supported in this release. SEQUENCE OF ZhoneDs1FarEndCurrentEntry .1.3.6.1.4.1.5504.5.2.6 |
zhoneDs1FarEndCurrentEntryAn entry in the DS1 Far End Current table. ZhoneDs1FarEndCurrentEntry .1.3.6.1.4.1.5504.5.2.6.1 |
zhoneFarEndCurrentIndexThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of zhLineIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.5504.5.2.6.1.1 |
zhoneFarEndTimeElapsedThe number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.5504.5.2.6.1.2 |
zhoneFarEndValidIntervalsThe number of previous far end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute far end intervals since the interface has been online.ro INTEGER .1.3.6.1.4.1.5504.5.2.6.1.3 |
zhoneFarEndCurrentESsThe number of Far End Errored Seconds.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.6.1.4 |
zhoneFarEndCurrentSESsThe number of Far End Severely Errored Seconds.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.6.1.5 |
zhoneFarEndCurrentSEFSsThe number of Far End Severely Errored Framing Seconds.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.6.1.6 |
zhoneFarEndCurrentUASsThe number of Unavailable Seconds.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.6.1.7 |
zhoneFarEndCurrentCSSsThe number of Far End Controlled Slip Seconds.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.6.1.8 |
zhoneFarEndCurrentLESsThe number of Far End Line Errored Seconds.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.6.1.9 |
zhoneFarEndCurrentPCVsThe number of Far End Path Coding Violations.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.6.1.10 |
zhoneFarEndCurrentBESsThe number of Far End Bursty Errored Seconds.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.6.1.11 |
zhoneFarEndCurrentDMsThe number of Far End Degraded Minutes.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.6.1.12 |
zhoneFarEndInvalidIntervalsThe number of intervals in the range from 0 to zhFarEndValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.5504.5.2.6.1.13 |
zhoneDs1FarEndIntervalTableThe DS1 Far End Interval Table contains various statistics collected by each DS1 interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by zwFarEndIntervalNumber) for one specific instance (identified by zwFarEndIntervalIndex). Not supported in this release. SEQUENCE OF ZhoneDs1FarEndIntervalEntry .1.3.6.1.4.1.5504.5.2.7 |
zhoneDs1FarEndIntervalEntryAn entry in the DS1 Far End Interval table. ZhoneDs1FarEndIntervalEntry .1.3.6.1.4.1.5504.5.2.7.1 |
zhoneFarEndIntervalIndexThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of zhLineIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.5504.5.2.7.1.1 |
zhoneFarEndIntervalNumberA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.ro INTEGER .1.3.6.1.4.1.5504.5.2.7.1.2 |
zhoneFarEndIntervalESsThe number of Far End Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.7.1.3 |
zhoneFarEndIntervalSESsThe number of Far End Severely Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.7.1.4 |
zhoneFarEndIntervalSEFSsThe number of Far End Severely Errored Framing Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.7.1.5 |
zhoneFarEndIntervalUASsThe number of Unavailable Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.7.1.6 |
zhoneFarEndIntervalCSSsThe number of Far End Controlled Slip Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.7.1.7 |
zhoneFarEndIntervalLESsThe number of Far End Line Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.7.1.8 |
zhoneFarEndIntervalPCVsThe number of Far End Path Coding Violations.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.7.1.9 |
zhoneFarEndIntervalBESsThe number of Far End Bursty Errored Seconds.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.7.1.10 |
zhoneFarEndIntervalDMsThe number of Far End Degraded Minutes.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.7.1.11 |
zhoneFarEndIntervalValidDataThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.5.2.7.1.12 |
zhoneDs1FarEndTotalTableThe DS1 Far End Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. Not supported in this release. SEQUENCE OF ZhoneDs1FarEndTotalEntry .1.3.6.1.4.1.5504.5.2.8 |
zhoneDs1FarEndTotalEntryAn entry in the DS1 Far End Total table. ZhoneDs1FarEndTotalEntry .1.3.6.1.4.1.5504.5.2.8.1 |
zhoneFarEndTotalIndexThe index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of zhLineIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.5504.5.2.8.1.1 |
zhoneFarEndTotalESsThe number of Far End Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.8.1.2 |
zhoneFarEndTotalSESsThe number of Far End Severely Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.8.1.3 |
zhoneFarEndTotalSEFSsThe number of Far End Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.8.1.4 |
zhoneFarEndTotalUASsThe number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.8.1.5 |
zhoneFarEndTotalCSSsThe number of Far End Controlled Slip Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.8.1.6 |
zhoneFarEndTotalLESsThe number of Far End Line Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.8.1.7 |
zhoneFarEndTotalPCVsThe number of Far End Path Coding Violations reported via the far end block error count encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.8.1.8 |
zhoneFarEndTotalBESsThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.8.1.9 |
zhoneFarEndTotalDMsThe number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.2.8.1.10 |
zhoneChanMappingTableThe DS1 Channel Mapping table. This table maps a DS1 channel number on a particular DS3 into an ifIndex. In the presence of DS2s, this table can be used to map a DS2 channel number on a DS3 into an ifIndex, or used to map a DS1 channel number on a DS2 onto an ifIndex. Not supported in this release. SEQUENCE OF ZhoneChanMappingEntry .1.3.6.1.4.1.5504.5.2.9 |
zhoneChanMappingEntryAn entry in the DS1 Channel Mapping table. There is an entry in this table corresponding to each ds1 ifEntry within any interface that is channelized to the individual ds1 ifEntry level. This table is intended to facilitate mapping from channelized interface / channel number to DS1 ifEntry. (e.g. mapping (DS3 ifIndex, DS1 Channel Number) -> ifIndex) While this table provides information that can also be found in the ifStackTable and zhoneWanTable, it provides this same information with a single table lookup, rather than by walking the ifStackTable to find the various constituent ds1 ifTable entries, and testing various zhoneWanTable entries to check for the entry with the applicable DS1 channel number. ZhoneChanMappingEntry .1.3.6.1.4.1.5504.5.2.9.1 |
zhoneChanMappedIfIndexThis object indicates the ifIndex value assigned by the agent for the individual ds1 ifEntry that corresponds to the given DS1 channel number (specified by the INDEX element zwDs1ChannelNumber) of the given channelized interface (specified by INDEX element ifIndex).ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.5504.5.2.9.1.1 |
zhoneDsxTraps OBJECT IDENTIFIER .1.3.6.1.4.1.5504.5.2.10 |
zhoneDsxTrapsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.5504.5.2.10.0 |
zhoneLineStatusChangeA zhoneLineStatusChange trap is not sent when the value of an instance zhoneLineStatus changes. It can be utilizeded by the NMS to trigger polls. When the line status change results from a hihter level line status change (i.e. ds3), then no traps for the ds1 are sent. Not supported on BAN in this release. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.5.2.10.0.1 |
zhoneDs1BertTableThe BERT Table is used to issue Bit Error Rate Tests on a particular Ds1. SEQUENCE OF ZhoneDs1BertEntry .1.3.6.1.4.1.5504.5.2.13 |
zhoneDs1BertEntryAn entry in the BERT table. ZhoneDs1BertEntry .1.3.6.1.4.1.5504.5.2.13.1 |
zhoneBertIndexThis field is the index field for the BERT test channel. There is only 1 BERT test allowed at a time. Integer32 .1.3.6.1.4.1.5504.5.2.13.1.1 |
zhoneBertInterfaceIndexThis field contains the InterfaceIndex of the physical line to be tested. If no line is currently being tested this value is 0.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.5504.5.2.13.1.2 |
zhoneBertRequestCommand request list for the Ds1 BERT test. This object corresponds to the list of test operations that can be performed. The possible values are noOp (1), -- used when reading the object start (2), -- start test stop (3), -- stop an initiated test Reading this object will always return the value 'noOp (1)'.rw Enumeration .1.3.6.1.4.1.5504.5.2.13.1.3 |
zhoneBertTypeThe type of pattern to use for the BERT test on the Ds1. Supported patterns are qrss, prbs 2^15, or prbs 2^20.rw Enumeration .1.3.6.1.4.1.5504.5.2.13.1.4 |
zhoneBertTestDurationThe duration in seconds of the BERT test for the Ds1. The valid range for this field is 10-300 seconds.rw INTEGER .1.3.6.1.4.1.5504.5.2.13.1.5 |
zhoneBertLoopUpThe loop code to be sent to the farend prior to running the BERT test for the Ds1.rw Enumeration .1.3.6.1.4.1.5504.5.2.13.1.6 |
zhoneDs1BertResultsTableThe BERT Results Table is used to retrieve results from a Bit Error Rate Test on a particular Ds1. SEQUENCE OF ZhoneDs1BertResultsEntry .1.3.6.1.4.1.5504.5.2.14 |
zhoneDs1BertResultsEntryAn entry in the BERT results table. ZhoneDs1BertResultsEntry .1.3.6.1.4.1.5504.5.2.14.1 |
zhoneBertStatusThe overall BERT operational status. This field will indicate the operation status for the interface indexed by zhoneBertInterfaceIndex. inProgress (1) - if the test is currently running. abortInProgress (2) - if a request to stop the test is still in progress. complete (3) - if the test has been run at least once since system reset and has completed. noResults (4) - if the test results are empty, such as after a system reset. aborted (5) - if the test was aborted by the user before it could complete. unsupported (6) - if the device does not support BERT. portNotAdminTest (7) - if port not in admin TEST. failed (8) - if BERT failed to complete.ro Enumeration .1.3.6.1.4.1.5504.5.2.14.1.1 |
zhoneBertElapsedTimeElapsed time of the most recent BERT test.ro INTEGER .1.3.6.1.4.1.5504.5.2.14.1.2 |
zhoneBertErroredSecondsNumber of errored seconds for the most recent BERT test. This field is only valid when zhoneBertStatus is complete.ro INTEGER .1.3.6.1.4.1.5504.5.2.14.1.3 |
zhoneBertOutOfSynchSecondsNumber of out of synch seconds for the most recent BERT test. This field is only valid when zhoneBertStatus is complete.ro INTEGER .1.3.6.1.4.1.5504.5.2.14.1.4 |
zhoneBertErrorsNumber of errors for the most recent BERT test. This field is only valid when zhoneBertStatus is complete.ro INTEGER .1.3.6.1.4.1.5504.5.2.14.1.5 |