ZHONE-SHELF-MONITOR-MIB
AI MIB Summary
The ZHONE-SHELF-MONITOR-MIB facilitates per-shelf hardware monitoring within the PLS (Packet Line System) infrastructure, tracking critical operational metrics such as power supply status, fan health, temperature sensors, and line card availability. This module enables granular fault detection and resource utilization analysis for Zhone Technologies shelf-based network elements via SNMP.
Contains the elements that are monitored on a per shelf basis in the PLS.
Main OID:
zhoneShelfMonitorModule.1.3.6.1.4.1.5504.6.7
74
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
74 total| Object Name |
|---|
shelfDataTableA table of shelf information and status for each shelf in a PLS system. The table includes revision level, general shelf status, and enviromental monitoring. The maximum number of shelves in a system is 255. Shelf 0 is an invalid entry. SEQUENCE OF ShelfDataEntry .1.3.6.1.4.1.5504.3.2.1 |
shelfDataEntryAn entry per shelf in a PLS system. The entries are indexed by zhoneShelfIndex or the shelf number which has a value of 1 to 255. Shelf 0 is not valid. zhoneShelfIndex is a column in the zhoneShelfSlotTable, defined in the zhone MIB (Zhone.mib). An Entry in the table is automatically created when a new shelf is added to a PLS and detected by the operating software of the system ShelfDataEntry .1.3.6.1.4.1.5504.3.2.1.1 |
shelfMfgCLEICodeCLEI (Common Language Equipment Identifier) code of the shelf assembly as stored in the EEPROM of the unit if defined otherwise the value will be set to NULL (0-length string) by the shelf monitor card. Note: CLEI codes for individual assemblies of the shelf such as monitor card or backplane assembly are not supported.ro ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.3.2.1.1.1 |
shelfMonitorSerialNumberThe manufacturing serial number for the shelf monitor card of this shelf assembly.ro ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.3.2.1.1.2 |
shelfMonitorRevisionCodeManufacturing hardware revision code for the shelf monitoring card of this shelf assemblyro ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.3.2.1.1.3 |
shelfBkplaneSerialNumberThe manufacturing serial number of the backplane in this shelf assembly.ro ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.3.2.1.1.4 |
shelfBkplaneRevisionCodeThe manufacturing hardware revision code for the back- plane in this shelf assembly.ro ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.3.2.1.1.5 |
shelfFanTraySerialNumberThe manufacturing serial number for the fan tray assembly in this shelf assembly.ro ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.3.2.1.1.6 |
shelfFanTrayRevisionCodeThe hardware revision code for the fan tray assembly in this shelf assembly.ro ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.3.2.1.1.7 |
shelfSlotCountThe number of slots in this shelfro Integer32 .1.3.6.1.4.1.5504.3.2.1.1.8 |
shelfFeatureBitsA string of 8 octets indicating the setting of the feature BITS.ro OCTET STRING .1.3.6.1.4.1.5504.3.2.1.1.9 |
shelfFanTrayTypeDescription.ro ZhoneCardType (Zhone-TC) .1.3.6.1.4.1.5504.3.2.1.1.10 |
shelfIOAlarmBoardPresentIndicates that MXK I/O Alarm Board hardware is present and supported. Not used in systems other than MXK.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.3.2.1.1.11 |
shelfStatusTableenvironmental status table - this table contains the environmental monitoring data for each shelf in a PLS. SEQUENCE OF ShelfStatusEntry .1.3.6.1.4.1.5504.3.2.2 |
shelfStatusEntryThis table augments the shelfDataTable. Each entry in the table contains the status of the environmental monitoring sensors on the shelf monitor card. ShelfStatusEntry .1.3.6.1.4.1.5504.3.2.2.1 |
shelfAPowerStatusStatus of the A power to the shelf. On systems with multiple power sources, this entry represents the AC power-supply status. On systems with line-power, this entry represents the status of power-line 1. The status of the power is indicated as follows: powerOk: the shelf is receiving a normal (in-range) voltage. powerNotOk: the shelf is not receiving voltage or the voltage is outside of the usable range. A trap is generated with the loss of A power.ro Enumeration .1.3.6.1.4.1.5504.3.2.2.1.1 |
shelfBPowerStatusStatus of the B power to the shelf. On systems with multiple power sources, this entry represents the -48 Volt DC power-supply status. On systems with line-power, this entry represents the status of power-line 2. The status of the power is indicated as follows: powerOk: the shelf is receiving a normal (in-range) voltage. powerNotOk: the shelf is not receiving voltage or the voltage is outside of the usable range. A trap is generated with the loss of A power.ro Enumeration .1.3.6.1.4.1.5504.3.2.2.1.2 |
shelfTemperatureStatusOutlet or exhaust air temperature as status. A trap is generated if temperature leaves the normal opertioning range.ro Enumeration .1.3.6.1.4.1.5504.3.2.2.1.3 |
shelfFanTrayStatusThe operational status of the shelf fan tray assembly as follows: Operational: the fan tray is fully operational with all fans running. notOperational: the fan tray assembly has failed. A high severity trap is generated when the status is set to notOperational.ro Enumeration .1.3.6.1.4.1.5504.3.2.2.1.4 |
shelfAlarmContactsStatusA BIT field of two (2) BITs indicating larm status of the dry contact alarm on the chassis/shelf: A value of zero(0) is returned in each BIT if the contact is open A value of one(1) is returned if the contack is closedro Bits .1.3.6.1.4.1.5504.3.2.2.1.5 |
shelfCardStatusA string of octets, with one octet per card slot on the shelf assembly. The string of octets indicates the status of each slot in sequence with the first octet describing first slot. The encoding of each octet is as follows: 1: card is booting from eeprom 2: card is performing post tests 3: card is loading code from code loader 4: card is configuing 5: card is running 6: card is blocked from booting 7: card is dumping fatal data 8: card is in faulted 9: card is reseting 10: slot is empty 11: slot is not provisioned 12: card is disabled 13: card is powered down 14: card is powered up 15: card is uplink with active traffic 16: card is uplink without active trafficro OCTET STRING .1.3.6.1.4.1.5504.3.2.2.1.6 |
shelfLedStatusA BIT field of six(6) BITs indicating the status of the LEDs on the chassis bezel. A value of zero(0) is returned in each BIT if the LED is off, a value of one(1) is returned if the LED is lit.ro Bits .1.3.6.1.4.1.5504.3.2.2.1.7 |
shelfAdminResetsCount of the number of administration resets to a shelf such as systemreboot.ro Gauge32 .1.3.6.1.4.1.5504.3.2.2.1.8 |
shelfFaultResetsCount of the number of shelf resets due to faults.ro Gauge32 .1.3.6.1.4.1.5504.3.2.2.1.9 |
shelfPowerResetsCount of the number of shelf resets due to power failure or power cycle.ro Gauge32 .1.3.6.1.4.1.5504.3.2.2.1.10 |
shelfCPowerStatusStatus of the C power to the shelf. On systems with multiple power sources, this entry represents the line-power power-supply status. On systems with line-power, this entry represents the status of power-line 3. The status of the power is indicated as follows: powerOk: the shelf is receiving a normal (in-range) voltage. powerNotOk: the shelf is not receiving voltage or the voltage is outside of the usable range. A trap is generated with the loss of A power.ro Enumeration .1.3.6.1.4.1.5504.3.2.2.1.11 |
shelfDPowerStatusStatus of the D power to the shelf. On systems with line-power, this entry represents the status of power-line 4. The status of the power is indicated as follows: powerOk: the shelf is receiving a normal (in-range) voltage. powerNotOk: the shelf is not receiving voltage or the voltage is outside of the usable range. A trap is generated with the loss of A power.ro Enumeration .1.3.6.1.4.1.5504.3.2.2.1.12 |
shelfBatteryAVoltageBattery A voltage measurement.ro ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.3.2.2.1.13 |
shelfBatteryBVoltageBattery B voltage measurement.ro ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.3.2.2.1.14 |
shelfChassisReturnVoltageChassis return voltage.ro ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.3.2.2.1.15 |
shelfFanTableA table of information about the fans on the shelf. Currently a BAN has 8 fans and a MALC has 3 fans. SEQUENCE OF ShelfFanEntry .1.3.6.1.4.1.5504.3.2.3 |
shelfFanEntryDescription. ShelfFanEntry .1.3.6.1.4.1.5504.3.2.3.1 |
shelfFanIndexAn index into the fan table. It is index from 1..Number of fans with no missing indicies. Integer32 .1.3.6.1.4.1.5504.3.2.3.1.1 |
shelfFanSpeedFan speed of the fan in RPMro Integer32 .1.3.6.1.4.1.5504.3.2.3.1.2 |
shelfFanLocationDescription of the location of the fan in the fan trayro ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.3.2.3.1.3 |
shelfFanLowSpeedThresholdThe lower speed allowed for a fan before it is considered failed.ro Integer32 .1.3.6.1.4.1.5504.3.2.3.1.4 |
shelfTemperatureTableA table of information about the temperature sensors in the shelf. SEQUENCE OF ShelfTemperatureEntry .1.3.6.1.4.1.5504.3.2.4 |
shelfTemperatureEntryDescription. ShelfTemperatureEntry .1.3.6.1.4.1.5504.3.2.4.1 |
shelfTemperatureIndexAn index into the temperature table. It is index 1..Number of temperature sensors with no missing indicies. Integer32 .1.3.6.1.4.1.5504.3.2.4.1.1 |
shelfTemperatureThe temperature of a shelf at this position.ro Integer32 .1.3.6.1.4.1.5504.3.2.4.1.2 |
shelfTemperatureLocationThe location of the this temperature sensors.ro ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.3.2.4.1.3 |
shelfTemperatureHighThresholdThe upper temperature when an alarm will be sent.ro Integer32 .1.3.6.1.4.1.5504.3.2.4.1.4 |
shelfTemperatureLowThresholdThe lower temperature that an alarm will be sent.ro Integer32 .1.3.6.1.4.1.5504.3.2.4.1.5 |
shelfCardTableA table of card information for each shelf in a PLS system. The includes different counts of resets for each card and the card type for each slot. SEQUENCE OF ShelfCardEntry .1.3.6.1.4.1.5504.3.2.5 |
shelfCardEntryAn entry per slot and shelf in a PLS system. The entries are indexed by zhoneShelfIndex/zhoneSlotIndex. ShelfCardEntry .1.3.6.1.4.1.5504.3.2.5.1 |
cardTypeThe card type for the card in this slot.ro ZhoneCardType (Zhone-TC) .1.3.6.1.4.1.5504.3.2.5.1.1 |
cardSubTypeThe card sub type for this slotro ZhoneCardType (Zhone-TC) .1.3.6.1.4.1.5504.3.2.5.1.2 |
cardLineTypeThe card line type for this slot. This is only valid if the slot is provisioned.ro ZhoneCardLineType (Zhone-TC) .1.3.6.1.4.1.5504.3.2.5.1.3 |
cardVersionThe card version for the card in this slot.ro ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.3.2.5.1.4 |
cardEepromVersionThe eeprom version for the card in this slot.ro ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.3.2.5.1.5 |
cardSerialNumberThe serial number for the card in this slot.ro ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.3.2.5.1.6 |
cardCLEICodeCLEI (Common Language Equipment Identifier) code of the shelf assembly as stored in the EEPROM of the unit if defined otherwise the value will be set to NULL (0-length string) by the shelf monitor card.ro ZhoneAdminString (Zhone-TC) .1.3.6.1.4.1.5504.3.2.5.1.7 |
cardFeatureBitsA string of 8 octets indicating the setting of the feature BITS.ro OCTET STRING .1.3.6.1.4.1.5504.3.2.5.1.8 |
cardStateThe card state for the card in this slot. cardStateBooting card is booting from eeprom cardStatePost card is performing post tests cardStateLoading card is loading code from code loader cardStateConfiguring card is configuing cardStateRunning card is running cardStateResetHold card is blocked from booting cardStateDumping cardStateFault card is in faulted cardStateReset card is reseting cardNotPresent card is not present in slot cardNotProvisioned card in slot is not provisionedro Enumeration .1.3.6.1.4.1.5504.3.2.5.1.9 |
cardAdminResetsCount of the number of administration resets to this card.ro Gauge32 .1.3.6.1.4.1.5504.3.2.5.1.10 |
cardFaultResetsCount of number of fault resets to this card.ro Gauge32 .1.3.6.1.4.1.5504.3.2.5.1.11 |
cardRebootWhen set to true, this card will be rebooted. Error cases: (a) If the card is not present, a set results in an INCONSISTENT_VALUE error. (b) An attempt to set to false results in a WRONG_VALUE error. All gets will return a value of false. This is supported only on systems with a supervisory bus, such as BAN & MALC.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.3.2.5.1.12 |
zhoneShelfStatusThis variable is set by the ShelfMonitor when the shelf state changes.ro Enumeration .1.3.6.1.4.1.5504.3.2.7 |
zhoneCardStatusThis variable is set by the ShelfMonitor whenever the card state changes.ro Enumeration .1.3.6.1.4.1.5504.3.2.8 |
zhoneShelfStatusLastChangeThe time the shelf status changed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5504.3.2.10 |
zhoneCardStatusLastChangeThe time the card status last changed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5504.3.2.11 |
zhoneTrapShelfMonitorV2TrapsShelfMonitor Trap. OBJECT IDENTIFIER .1.3.6.1.4.1.5504.3.2.12 |
zhoneTrapShelfMonitorGroupDescription. Unknown .1.3.6.1.4.1.5504.3.2.12.1 |
zhoneTrapShelfStatusChangeShelf status reported by the ShelfMonitor. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.3.2.12.2 |
zhoneTrapCardStatusChangeCard status reported by the ShelfMonitor. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.3.2.12.3 |
zhoneTrapCardVersionCheckWhen the cardVersion of a card is incompatible with that of active InfoServ card, this trap is generated. Currently, this is only supported on BAN platform and its card versions are described as follows: The revision number of the newer 40 Mhz cards is in the range of 'BA' to 'CV'. Older card version either does not display in this format or the revision number is not in this range. For example, for a card with cardVersion '840-29496-72-CR', the revision number is 'CR' and is a new 40 Mhz card. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.3.2.12.4 |
zhoneTrapFlashCardStatusChangeThis Trap reports the FlashCard status change for the InfoServ slots flash cards within BAN shelf. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.3.2.12.5 |
zhoneTrapCardToBkplaneStatusChangeMxk line card link to backplane status. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.3.2.12.6 |
zhoneShelfStatusGroupThese objects are used to identify the status change of the trap. Unknown .1.3.6.1.4.1.5504.3.2.13 |
zhoneStatusLastChangeGroupDescription. Unknown .1.3.6.1.4.1.5504.3.2.14 |
zhoneCardStatusGroupDescription. Unknown .1.3.6.1.4.1.5504.3.2.15 |
zhoneFlashCardStatusChangeThe FlashCardStatus reports the status of the flash card ports on the InfoServe cards within BAN shelf. 1 : FlashCard Port 1 is Installed 2 : FlashCard Port 1 is Removed 3 : FlashCard Port 2 is Installed 4 : FlashCard Port 2 is Removedro Enumeration .1.3.6.1.4.1.5504.3.2.16 |
zhoneCardLinkToBkplaneStatusMxk linecard Link To Backplane status.ro Enumeration .1.3.6.1.4.1.5504.3.2.17 |
zhoneShelfMonitorModuleContains the elements that are monitored on a per shelf basis in the PLS. MODULE-IDENTITY .1.3.6.1.4.1.5504.6.7 |