ZHONE-ISDN-MIB
ISDN BRI S/T Interface MIB module. This MIB manages the ISDN BRI S/T Interface on Zedge .
Main OID:
zhoneIsdn.1.3.6.1.4.1.5504.5.7
38
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
38 total| Object Name |
|---|
zhoneIsdnTrapTrap for zedge to be sent to ZMS for far end code violation. OBJECT IDENTIFIER .1.3.6.1.4.1.5504.3.8.3 |
isdnMibV2TrapsThis object identity adds a zero(0) for the next to last sub-identifier which should be used for new SNMPv2 Traps. OBJECT IDENTIFIER .1.3.6.1.4.1.5504.3.8.3.1 |
isdnTrapFrameSynchLossWhen the driver receives three successive out of synch frames then it will set the frame synch loss bit to true and then the application will send a trap to the NMS. After this when the driver detects 5 good frames then it will set the frame synch lossbit to false. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.3.8.3.1.1 |
isdnTrapFECVFar end code violation Trap NOTIFICATION-TYPE .1.3.6.1.4.1.5504.3.8.3.1.2 |
isdnTrapAmiViolationsBad Ami violation Trap. If number of ami violation crosses the isdnThresholdAmiViolations then the application will send this to NMS. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.3.8.3.1.3 |
isdnTrapUnbalancedFrameThis trap will be sent to NMS after the isdnThresholdUnbalancedFrame value is crossed. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.3.8.3.1.4 |
zhoneIsdnISDN BRI S/T Interface MIB module. This MIB manages the ISDN BRI S/T Interface on Zedge . MODULE-IDENTITY .1.3.6.1.4.1.5504.5.7 |
zhoneIsdnMib OBJECT IDENTIFIER .1.3.6.1.4.1.5504.5.7.1 |
isdnConfigTableThe ISDN BRI integrated S/T Interface Configuration Table. This table is indexed by IfIndex.It is created by aplication when the system comes up with default values. SEQUENCE OF IsdnConfigEntry .1.3.6.1.4.1.5504.5.7.1.1 |
isdnConfigEntryAn entry in the ISDN config table for each S/T Interface. IsdnConfigEntry .1.3.6.1.4.1.5504.5.7.1.1.1 |
isdnLineTermClassNT Terminal Mode.clas1 and class2 operations are as per CCITT I.430, ETSI ETS 300012, and ANSI T1.605 .These specification mandate two classes of operation for a TE with respect to D channel operation class1 : class1 is the higher class , used for signalling information class2 : This is the lower class. The default value is class1.rw Enumeration .1.3.6.1.4.1.5504.5.7.1.1.1.1 |
isdnActivationTimer2Value of Activation Timer #2. t2-50ms(1): select 50ms for timer #2 t2-100ms(2): select 1000ms for timer #2 The default value is t2-50msrw Enumeration .1.3.6.1.4.1.5504.5.7.1.1.1.2 |
isdnLineLoopBackloop-back-none(1) :no loop back . loop-back-b1-st-tr(2): transparaent loopback on the S/T interface towards the user(B1 chanel). loop-back-b1-st-nt(3): non-transparent loopback onthe S/T interface towards the user(B1 chanel).. loop-back-b2-st-tr(4) :transparaent loopback on the S/T interface towards the user(B2 chanel). loop-back-b2-st-nt(5):non-transparent loopback on the S/T interface towards the user(B2 channel) loop-back-b1-idl2-tr(6):transparaent loopback on the IDL2 interface towards the system(B1 channel) loop-back-b1-idl2-nt(7):non-transparent loopback on the IDL2 interface towards the system(B1 channel) loop-back-b2-idl2-tr(8):transparaent loopback on the IDL2 interface towards the system(B2 channel) loop-back-b2-idl2-nt(9): non-transparent loopback on the IDL2 interface towards the system(B2 channel) loop-back-2bd-idl2-tr(10): transparent loopback on the IDL2 towards the system(2B + D channel) loop-back-2bd-idl2-nt(11): non-transparent loopback on the IDL2 towards the system(2B + D channel) loop-back-2bd-u-interface-tr (12): transparent loopback on the U interface towards the user(2B + D channel) loop-back-2bd-u-interface-nt (13): non-transparent loopback on the U interface(2B + D channel) loop-back-2bd-external-analog(14): loopback on the external analog interface towards the user(2B + D channel) st is loopback on the S/T interface towards the user. idl2 is loopback on the IDL2 interface towards the system. tr is transparent loopback. nt is non-transparent loopback. The default value is loop-back-none.rw Enumeration .1.3.6.1.4.1.5504.5.7.1.1.1.3 |
isdnLinePowerState of the line power. off - no power on line. sealing - minimum current on line to preclude corrosion. powering - full current on line.rw Enumeration .1.3.6.1.4.1.5504.5.7.1.1.1.4 |
isdnPerfDataCurrentTableThe ISDN BRI S/T interface performance table which contains the performance data for curent 15 minutes. It contains information about the status of the ISDN S/T interface, including the error statistics. SEQUENCE OF IsdnPerfDataCurrentEntry .1.3.6.1.4.1.5504.5.7.1.2 |
isdnPerfDataCurrentEntryAn entry in current performance table for each ISDN BRI S/T interface for last 15 minutes. IsdnPerfDataCurrentEntry .1.3.6.1.4.1.5504.5.7.1.2.1 |
isdnPerfCurBadAmiViolationCurrent count of frames with incorrect number of AMI violations.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.7.1.2.1.1 |
isdnPerfCurUnbalancedFrameCurrent count of unbalanced frames.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.7.1.2.1.2 |
isdnPerCurErrorSecondsCurent ISDN Activation error seconds.ro PerfCurrentCount UNITS "seconds" .1.3.6.1.4.1.5504.5.7.1.2.1.3 |
isdnPerCurFsyncSecondsCurrents Frame synch loss seconds .ro PerfCurrentCount UNITS "seconds" .1.3.6.1.4.1.5504.5.7.1.2.1.4 |
isdnPerfCurTimeElapsedIn the current 15 Min period number of seconds elapsed that these counts represent.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5504.5.7.1.2.1.5 |
isdnPerfDataPreviousTableThe ISDN BRI S/T interface performance table, it contains statistics and information about the status of the ISDN S/T interface, including the error statistics for previous 15 minutes. SEQUENCE OF IsdnPerfDataPreviousEntry .1.3.6.1.4.1.5504.5.7.1.3 |
isdnPerfDataPreviousEntryAn entry in Previous performance table(for last 15 minutes before the current performance period) for each S/T interface. IsdnPerfDataPreviousEntry .1.3.6.1.4.1.5504.5.7.1.3.1 |
isdnPerfPrevBadAmiViolationcount of frames with incorrect number of AMI violations in previous 15 minutes.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.7.1.3.1.1 |
isdnPerfPrevUnbalancedFrameIn previous 15 minutes ,count of unbalanced frames.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.7.1.3.1.2 |
isdnPerPrevFsyncSecondsFrame synch error seconds in previous 15 minues.ro PerfIntervalCount UNITS "seconds" .1.3.6.1.4.1.5504.5.7.1.3.1.3 |
isdnPerfPrevErrorSecondsIn previous 15 minutes ISDN Activation error secondsro PerfIntervalCount UNITS "seconds" .1.3.6.1.4.1.5504.5.7.1.3.1.4 |
isdnPerfDataTotalTableThe ISDN BRI S/T interface performance table, it contains statistics and information about the status of the ISDN S/T interface, including the error statistics for up to the the last 24 hours. This is maintained in 15 minute intervals NOT including the current interval being accumulated. When the current period reaches 15 minutes, it's counts are rolled into the previous entry and added to these values. The 97th entry, previous to the 24 hour period is no longer included in these counts. SEQUENCE OF IsdnPerfDataTotalEntry .1.3.6.1.4.1.5504.5.7.1.4 |
isdnPerfDataTotalEntryAn entry in total performance table for each S/T interface. IsdnPerfDataTotalEntry .1.3.6.1.4.1.5504.5.7.1.4.1 |
isdnPerfTotalBadAmiViolationTotal count of frames with incorrect number of AMI violations.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.7.1.4.1.1 |
isdnPerfTotalUnbalancedFrameTotal count of unbalanced frames.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.5504.5.7.1.4.1.2 |
isdnPerTotalFsyncSecondsTotal Frame synch error seconds.ro PerfTotalCount UNITS "seconds" .1.3.6.1.4.1.5504.5.7.1.4.1.3 |
isdnPerfTotalErrorSecondsISDN Activation error secondsro PerfTotalCount UNITS "seconds" .1.3.6.1.4.1.5504.5.7.1.4.1.4 |
isdnPerfTotalTimePeriodsElapsedNumber of 15 minute time periods that have been used in the performance total table. This value is normally 96 indicating a valid 24 hour time period except in the cases of a restart of this agent.ro Integer32 .1.3.6.1.4.1.5504.5.7.1.4.1.5 |
isdnAlarmProfileTableThis table contains information for Alarm conditions. The table is indexed by IfIndex . The alarm profile will be set per port basis usig ifIndex by the application when the system comes up. The operator can not create the profile , he can only change it . SEQUENCE OF IsdnAlarmProfileEntry .1.3.6.1.4.1.5504.5.7.1.5 |
isdnAlarmProfileEntryAn entry in AlarmProfile Table. IsdnAlarmProfileEntry .1.3.6.1.4.1.5504.5.7.1.5.1 |
isdnThresholdAmiViolationsThreshold for number of AMI violation . If the number of violations cross this threshold then the notification is sent to NMS. 0 will disable the trap. The default value is 0. There is no range speciffied for this.rw Unsigned32 .1.3.6.1.4.1.5504.5.7.1.5.1.1 |
isdnThresholdUnbalancedFrameThreshold for number of unbalanced frame after which the trap will be send to NMS.0 will disable the trap. The default value is 0. There is no range speciffied for this.rw Unsigned32 .1.3.6.1.4.1.5504.5.7.1.5.1.2 |