ZHONE-COM-VOICE-SIG-MIB
AI MIB Summary
The ZHONE-COM-VOICE-SIG-MIB monitors Zhone voice signaling hardware components, specifically tracking system-side parameters such as hookflash timers and scalar initialization states. This module enables automated provisioning of default signaling profiles upon system startup to ensure consistent voice service operation.
The Zhone Voice Signaling MIB defines Zhone Voice Signaling specfic information. This MIB contains system side voice specific info, like the hookflash timers. User will not create this profile, but when system comes up, it checks to see if the scalar info exists. If not, it creates one with default values.
Main OID:
zhoneVoiceSignalingMib.1.3.6.1.4.1.5504.4.3.7
35
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
35 total| Object Name |
|---|
zhoneVoiceSignalingMibThe Zhone Voice Signaling MIB defines Zhone Voice Signaling specfic information. This MIB contains system side voice specific info, like the hookflash timers. User will not create this profile, but when system comes up, it checks to see if the scalar info exists. If not, it creates one with default values. MODULE-IDENTITY .1.3.6.1.4.1.5504.4.3.7 |
zhoneVoiceSignalingTimersThis is a place holder to contain all the system wide voice specific timers. 'hookFlashTimerMin' field is read/write field so a user can set this field to a particular value. It specifies the minimum timer for hookflash. 'hookFlashTimerMax' field is a read/write field to a user can set this field to a particular value. It specifies the maximum timer for hookflash. OBJECT IDENTIFIER .1.3.6.1.4.1.5504.4.3.7.1 |
hookFlashTimerMinThe Hookflash specifies the minimum timer that qualifies for a hookflash. Any loopopen below this time will be ignored as a glitch.rw Integer32 .1.3.6.1.4.1.5504.4.3.7.1.1 |
hookFlashTimerMaxThe Hookflash specifies the maximum timer that qualifies for a hookflash. Any loopopen more than this timer will be considered as a onhook.rw Integer32 .1.3.6.1.4.1.5504.4.3.7.1.2 |
sysPartialDialToThis object contains the maximum value of the partial dial time out.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.3 |
sysCriticalDialToThis object contains the maximum value of the critical \ dial time out.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.4 |
sysBusyToneToThis object contains the default timeout value for busy tone.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.5 |
sysDialToneToThis object contains the default timeout value for dial tone.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.6 |
sysMsgWaitToneToThis object contains the default timeout value for message wait tone.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.7 |
sysOffhookWarnToneToThis object contains the default timeout value for offhook warn tone.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.8 |
sysRingingToThis object contains the default timeout value for ringing.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.9 |
sysRingbackToThis object contains the default timeout value for ringback tone.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.10 |
sysReorderToneToThis object contains the default timeout value for reorder tone.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.11 |
sysStutterToneToThis object contains the default timeout value for stutter tone.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.12 |
sysServerMaxTimerThis object is used as part of a retransmission algorithm when communicating with a call agent. This object contains the maximum time in seconds since the sending of the initial datagram to a call agent. If more than pktcNcsEndPntConfigTSMax time has elapsed, the endpoint becomes disconnected.rw Unsigned32 .1.3.6.1.4.1.5504.4.3.7.1.13 |
sysConfigMax1This object contains the suspicious error threshold for signaling messages. The configMax1 object indicates the retransmission threshold at which the gateway MAY actively query the domain name server (DNS) in order to detect the possible change of call agent interfaces.rw Unsigned32 .1.3.6.1.4.1.5504.4.3.7.1.14 |
sysConfigMax2This object contains the disconnect error threshold for signaling messages. The configMax2 object indicates the retransmission threshold at which the gateway SHOULD contact the DNS one more time to see if any other interfaces to the call agent have become available.rw Unsigned32 .1.3.6.1.4.1.5504.4.3.7.1.15 |
sysMax1EnableThis object enables/disables the Max1 domain name server (DNS) query operation when the configMax1 threshold has been reached.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.4.3.7.1.16 |
sysMax2EnableThis object enables/disables the Max2 domain name server (DNS) query operation when the configMax2 threshold has been reached.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.4.3.7.1.17 |
sysMaxWaitingDelayMaximum Waiting Delay (MWD) contains the maximum number of seconds a Gateway waits after powering on, before initiating the restart procedure with the call agent.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.18 |
sysDisconnectWaitTimerThis object contains the initial number of seconds the gateway waits after a disconnect, before initiating the disconnected procedure with the call agent.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.19 |
sysDisconnectMinTimerThis object contains the minimum number of seconds the gatway waits after a disconnect, before initiating the disconnected procedure with the call agent.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.20 |
sysDisconnectMaxTimerThis object contains the maximum number of seconds the gatway waits after a disconnect, before initiating the disconnected procedure with the call agent.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.21 |
sysMaxRetransmitTimerThis object contains the maximum number of seconds for the retransmission timer. When this timer expires the gateway retransmits the message.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.22 |
sysInitRetransmitTimerThis object contains the initial number of seconds for the retransmission timer.rw Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.5504.4.3.7.1.23 |
sysKeepAliveTimerSpecifies a timeout value in minutes for sending long duration call notification message.rw Unsigned32 UNITS "minutes" .1.3.6.1.4.1.5504.4.3.7.1.24 |
sysNoResponseTimerTimeout period in seconds before no response is declared.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.25 |
sysCallWaitMaxRepeatThis object contains the default value of the maximum number of repetitions of the call waiting tone that the gateway will play.rw Unsigned32 .1.3.6.1.4.1.5504.4.3.7.1.26 |
sysCallWaitDelayThis object contains the delay between repetitions of the call waiting tone that the gateway will play.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5504.4.3.7.1.27 |
sysPulseInterDigitTimerThis is the pulse dial inter-digit timeout.rw Unsigned32 .1.3.6.1.4.1.5504.4.3.7.1.28 |
sysMinMakePulseWidthThis is the minimum make pulse width for the dial pulse.rw Unsigned32 .1.3.6.1.4.1.5504.4.3.7.1.29 |
sysMaxMakePulseWidthThis is the maximum make pulse width for the dial pulse.rw Unsigned32 .1.3.6.1.4.1.5504.4.3.7.1.30 |
sysMinBreakPulseWidthThis is the minimum break pulse width for the dial pulse.rw Unsigned32 .1.3.6.1.4.1.5504.4.3.7.1.31 |
sysMaxBreakPulseWidthThis is the maximum break pulse width for the dial pulse.rw Unsigned32 .1.3.6.1.4.1.5504.4.3.7.1.32 |
zhoneVoiceSignalingObjectsGroupDescription. Unknown .1.3.6.1.4.1.5504.4.3.7.1.33 |