ZHNWIRELESS
This file defines the private Enterprise MIB extensions that define Wireless configuration and status objects supported by the Zhone ZNID CPEs.
Main OID:
zhnWireless.1.3.6.1.4.1.5504.2.5.46
108
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
108 total| Object Name |
|---|
zhnWirelessThis file defines the private Enterprise MIB extensions that define Wireless configuration and status objects supported by the Zhone ZNID CPEs. MODULE-IDENTITY .1.3.6.1.4.1.5504.2.5.46 |
zhnWirelessObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.46.1 |
wlBaseCfgTableTable of basic Wireless Adapter Configuration objects. SEQUENCE OF WlBaseCfgEntry .1.3.6.1.4.1.5504.2.5.46.1.1 |
wlBaseCfgEntryTable of entries of basic Wireless Adapter Configuration objects. WlBaseCfgEntry .1.3.6.1.4.1.5504.2.5.46.1.1.1 |
wlBaseCfgIndexBasic wireless adapter interface index. Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.1.1.1 |
wlBaseCfgEnableEnable or disable the wireless adapter.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.1.1.2 |
wlBaseCfgBandBroadcast band (e.g. 2.4GHz operation).ro OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.1.1.3 |
wlBaseCfgChannelThe configured wifi channel number or 'auto' for automatic selection of a channel with low interference.rw WlChannelSelections .1.3.6.1.4.1.5504.2.5.46.1.1.1.4 |
wlBaseCfgCurrentChannelThe actual wifi channel number in use.ro WlChannelSelections .1.3.6.1.4.1.5504.2.5.46.1.1.1.5 |
wlBaseCfgBandwidthAggregate radio bandwidth.ro OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.1.1.6 |
wlBaseCfgAutoScanTimerWhen configured for auto mode, this timer value specifies how often to re-analyze the spectrum to select a low interference channel. Note: auto channel rescan will only occur when there are no actively connected devices.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.1.1.7 |
wlBaseCfgMimoNEwcRadio 802.11n Enhanced Wireless Consortium (EWC) mode: auto(1) disable(2)rw WlMimoNEwcModes .1.3.6.1.4.1.5504.2.5.46.1.1.1.8 |
wlBaseCfgMimoNRateThe configured Multiple Input Multiple Output (MIMO) 802.11n rate. Enumeration of: auto(1), use54g(2), rate6Dot5(3), rate13(4), rate19Dot5(5), rate26(6), rate39(7), rate52(8), rate58Dot5(9), rate65(10), rate78(11), rate104(12), rate117(13), rate130(14)rw WlMimoNRates .1.3.6.1.4.1.5504.2.5.46.1.1.1.9 |
wlBaseCfgMimoNProtectionMultiple Input Multiple Output(MIMO) 802.11n protection mode. Enumeration of: off(1), auto(2),rw WlMimoNProtectionModes .1.3.6.1.4.1.5504.2.5.46.1.1.1.10 |
wlBaseCfgNClientsOnlyEnable or disable the restriction of access to 802.11n clients, only. When enabled, prevent 802.11b/g clients from connecting.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.1.1.11 |
wlBaseCfg54gRateThe rate when the radio is operating in 802.11g mode. This object only applies when the Multiple Input Multiple Output (MIMO) 802.11n Rate is set to use54g(2). Enumeration of: rate1M(1), rate2M(2), rate5Dot5M(3), rate6M(4), rate9M(5), rate11M(6), rate12M(7), rate18M(8), rate24M(9), rate36M(10), rate48M(11), rate54M(12)rw Wl54gMulticastRates .1.3.6.1.4.1.5504.2.5.46.1.1.1.12 |
wlBaseCfgMulticastRateThe rate for multicast traffic. Enumeration of: rate1M(1), rate2M(2), rate5Dot5M(3), rate6M(4), rate9M(5), rate11M(6), rate12M(7), rate18M(8), rate24M(9), rate36M(10), rate48M(11), rate54M(12)rw Wl54gMulticastRates .1.3.6.1.4.1.5504.2.5.46.1.1.1.13 |
wlBaseCfgBasicRateThe rate when the radio is operating in basic 802.11b/g mode. Enumeration of: default(1), -- use the factory defaulted basic rate all(2), -- allow all supported basic rates rate1And2(3), -- restrict the basic rates to 1Mbps and 2Mbps stdRates(4) -- restrict the basic rates to the standard rates of -- 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 11Mbps, 12Mbps, 24Mbpsrw WlBasicRates .1.3.6.1.4.1.5504.2.5.46.1.1.1.14 |
wlBaseCfgFragThresholdThe threshold at which packets are fragmented.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.1.1.15 |
wlBaseCfgRTSThresholdThe packet size of a request-to-send (RTS) transmission. A low threshold implies RTS packets are sent more frequently, thus requiring more bandwidth but ensuring packet transmission on a busy network.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.1.1.16 |
wlBaseCfgDTIMIntervalThe interval at which Delivery Traffic Indication Messages (DTIM) are generated. A DTIM message notifies a wireless client that a packet is waiting for tranmission.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.1.1.17 |
wlBaseCfgBeaconIntervalThe interval at which Beacons are generated.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.1.1.18 |
wlBaseCfgGlobalMaxClientsThe maximum number of wireless client devices that may be simultaneously connected to the radio. This value should include the sum total of all clients on all active SSIDs.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.1.1.19 |
wlBaseCfgXPressEnable or disable the XPress(TM) Technology.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.1.1.20 |
wlBaseCfgTxPowerPercentThe percentage of total power that should be used for data transmissions.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.1.1.21 |
wlBaseCfgWMMEnableEnable or disable Wifi Multimedia. When set to TRUE, audio, video and voice application data is prioritized over other network traffic.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.1.1.22 |
wlBaseCfgWMMNoAckEnable or disable the suppression of acknowledgements for frames that do not require a QOS Acknowledgement. This avoids the unnecessary transmission of acknowledgements for highly time-critical data.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.1.1.23 |
wlBaseCfgWMMApsdEnable or disable the Automatic Power Save Delivery (APSD) power management method. This feature is useful for bi-directional applications, such as VoIp phones.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.1.1.24 |
wlBaseCfgWpsAddClientMethodConfigure the method of adding Clients: pushButton(1), accessPointPIN(2), stationPIN(3)rw WlWpsAddClientMethod .1.3.6.1.4.1.5504.2.5.46.1.1.1.25 |
wlBaseCfgWpsApModeEnable or disable WiFi Protected Setup (WPS) AP mode. If your provider is using an external registrar for security, select true(1). The PIN for AP mode is specified by the registrar. Provide this PIN to the client. Select wlBaseCfgWpsConfigAp to begin the registration process with the client.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.1.1.26 |
wlBaseCfgWpsConfigApStart AP configuration. If your provider is using an external registrar for security, wlBaseCfgWpsApMode then select true(1) to begin the registration process with the client.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.1.1.27 |
wlBaseCfgWpsDevicePINDevice PIN provided by external registrar.ro OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.1.1.28 |
wlBaseCfgWpsAddEnrolleeStart AP configuration. If wlBaseCfgWpsAddClientMethod is set for pushButton(1), then the user must simultaneously push the WPS button on the rear panel of the wireless zNID and set this object to true(1) for push button registration on the client device.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.1.1.29 |
wlBaseCfgWpsStationPINStation PIN provided by user.ro OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.1.1.30 |
wlBaseCfgBridgeRestrictModeConfigure the bridge restriction mode: enable(1), enableScan(2), disable(3),rw WlBridgeRestrictModes .1.3.6.1.4.1.5504.2.5.46.1.1.1.31 |
wlBaseCfgBridgeRefreshScans for any wireless bridge devices in range and displays them in the Remote Bridge MAC Address table. Selecting true(1) will update the wireless bridge devices in range. Wait for a few seconds for the update.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.1.1.32 |
wlVirtualIntfTableTable of Wireless Virtual LAN Interface Configuration, Status and Statistics objects. SEQUENCE OF WlVirtualIntfEntry .1.3.6.1.4.1.5504.2.5.46.1.2 |
wlVirtualIntfEntryEntries in Wireless Vitrual LAN Interface Table. WlVirtualIntfEntry .1.3.6.1.4.1.5504.2.5.46.1.2.1 |
wlVirtualIndexBasic access point interface index. Guest (or Virtual) access points begin with index = 2. Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.2.1.1 |
wlVirtualHideEnable or disable the suppression of the advertising of the access point's SSID. If enabled, clients will need to configure the SSID to associate.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.2.1.2 |
wlVirtualAPIsolationEnable or disable the isolation of clients by enabling or disabling secure forwarding mode. This will preventpreventing one client from sending packets directly to another client. All packets are forwarded upstream on the WAN interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.2.1.3 |
wlVirtualDisableWmeEnable or disable the Wireless Multi-Media mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.2.1.4 |
wlVirtualEnableWmfEnable or disable Wireless Multicast Forwarding.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.2.1.5 |
wlVirtualSsidConfigure the Primary SSID assigned to the wl0 interface, or the Guest SSIDs assigned to the virtual wireless interfaces.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.2.1.6 |
wlVirtualBssMacAddrMAC Address assigned to the primary SSID.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.2.1.7 |
wlVirtualCountryCodeTwo character country code. The country code is automatically configured based upon the model number of the unit. All countries with 100mW EIRP maximum transmit power use the United Kingdom country code. North American models may use the maximum transmit power of 300mW EIRP.ro WlCountryCodes .1.3.6.1.4.1.5504.2.5.46.1.2.1.8 |
wlVirtualMaxClientsMaximum number of client devices that may be simultaneously connected to this SSID. The maximum clients value assigned to each access points must not exceed the global maximum clients value.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.2.1.9 |
wlVirtualEnableEnable or disable a single Wireless Virtual LAN Interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.2.1.10 |
wlSecurityTableTable of Wireless Security Configuration, Status and Statistics objects for virtual LAN interfaces. SEQUENCE OF WlSecurityEntry .1.3.6.1.4.1.5504.2.5.46.1.3 |
wlSecurityEntryTable of entries, per virtual LAN interface, of Wireless Security objects. WlSecurityEntry .1.3.6.1.4.1.5504.2.5.46.1.3.1 |
wlSecuritySsidThe primary SSID assigned to the wl0 interface, or the Guest SSIDs assigned to this virtual wireless interface.ro OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.3.1.1 |
wlSecurityWpsEnable or disable WiFi Protected Setup (WPS) security method. If WPS is disabled, the network authentication method, the data encryption, and network key should also be configured in order to authenticate to this wireless network.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.3.1.2 |
wlSecurityAuthModeConfigure the network authentication method: mode8011x(1), open(2), shared(3), wpa(4), wpa2(5), wpaPsk(6), wpa2Psk(7), mixedWpa2Wpa(8), mixedWpa2WpaPsk(9)rw WlAuthenticationModes .1.3.6.1.4.1.5504.2.5.46.1.3.1.3 |
wlSecurityWpaPskWPA/WPAI Passphrase. This field cannot contain a SPACE and is returned as a string of asterisks.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.3.1.4 |
wlSecurityWpaGTKRekeyWPA Group Rekey Interval.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.3.1.5 |
wlSecurityWpaModeWPA/WAPI Encryption mode: tkip(1), aes(2), tkipAes(3)rw WlWpaModes .1.3.6.1.4.1.5504.2.5.46.1.3.1.6 |
wlSecurityWepStatusStatus of Wireless Encryption Protocol (WEP) encryption: disabled(1) enabled(2)rw WlWepModes .1.3.6.1.4.1.5504.2.5.46.1.3.1.7 |
wlSecurityRadiusServerIPIP address of the Remote Authentication Dial In User Server (RADIUS) used for 802.1x authentication.rw IpAddress .1.3.6.1.4.1.5504.2.5.46.1.3.1.8 |
wlSecurityRadiusPortUDP port to use for accessing the Remote Authentication Dial In User Server (RADIUS).rw Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.3.1.9 |
wlSecurityRadiusKeyRemote Authentication Dial In User Server (RADIUS) authentication key. This field cannot contain a SPACE and is returned as a string of asterisks.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.3.1.10 |
wlSecurityWepKeySecurity encryption strength: bit64(1) bit128(2)rw WlSecurityKeyCodes .1.3.6.1.4.1.5504.2.5.46.1.3.1.11 |
wlSecurityCurrentWepKeyIndex64Index into array of 64-bit encryption keys.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.3.1.12 |
wlSecurityCurrentWepKeyIndex128Index into array of 128-bit encryption keys.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.3.1.13 |
wlSecurityWep64Key1WEP 64-bit encryption key 1 string, which must consist of 5 ASCII characters or 10 hexadecimal digits.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.3.1.14 |
wlSecurityWep64Key2WEP 64-bit encryption key 2 string, which must consist of 5 ASCII characters or 10 hexadecimal digits.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.3.1.15 |
wlSecurityWep64Key3WEP 64-bit encryption key 3 string, which must consist of 5 ASCII characters or 10 hexadecimal digits.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.3.1.16 |
wlSecurityWep64Key4WEP 64-bit encryption key 4 string, which must consist of 5 ASCII characters or 10 hexadecimal digits.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.3.1.17 |
wlSecurityWep128Key1WEP 128-bit encryption key 1 string, which must consist of 13 ASCII characters or 26 hexadecimal digits.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.3.1.18 |
wlSecurityWep128Key2WEP 128-bit encryption key 2 string, which must consist of 13 ASCII characters or 26 hexadecimal digits.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.3.1.19 |
wlSecurityWep128Key3WEP 128-bit encryption key 3 string, which must consist of 13 ASCII characters or 26 hexadecimal digits.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.3.1.20 |
wlSecurityWep128Key4WEP 128-bit encryption key 4 string, which must consist of 13 ASCII characters or 26 hexadecimal digits.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.3.1.21 |
wlSecurityWpa2PreauthEnable or disable WPA2 pre-authentication.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.3.1.22 |
wlSecurityWpa2NetReauthConfigure the WPA2 network re-authentication time, in seconds.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.3.1.23 |
wlSecurityMACFilterModeConfigure the MAC Filter mode. The MAC Filter rules defined in the wlMACFilterTable will be ignored when this object is set to disable(3).rw WlMACFilterModes .1.3.6.1.4.1.5504.2.5.46.1.3.1.24 |
wlMACFilterTableTable of Wireless MAC filter rules for a virtual wireless interface. The MAC Filter table contains a list of MAC addresses for devices that are permitted to connect, or prevented from connecting to the wireless service. SEQUENCE OF WlMACFilterEntry .1.3.6.1.4.1.5504.2.5.46.1.4 |
wlMACFilterEntryEntries in the Wireless MAC filter rules for a virtual wireless interface. WlMACFilterEntry .1.3.6.1.4.1.5504.2.5.46.1.4.1 |
wlMACFilterIndexThe Wireless MAC filter table index. Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.4.1.1 |
wlMACFilterSsidThe primary SSID assigned to the wl0 interface, or the Guest SSIDs assigned to this virtual wireless interface.ro OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.4.1.2 |
wlMACFilterMacAddrThe MAC address which to apply to the filter rule.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.4.1.3 |
wlMACFilterIfNameThe virtual interface name to which this rule applies.ro OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.4.1.4 |
wlMACFilterRowStatusThe SNMP RowStatus of the current row. When creating a new MAC Filter entry for a virtual wireless interface, only the MAC Address must be specified. The wlVirtualIndex will be used to determine the SSID and the filter mode to apply.rw ZhoneRowStatus (Zhone-TC) .1.3.6.1.4.1.5504.2.5.46.1.4.1.5 |
wlStaticWdsMACAddrTableTable of statically configured Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled. SEQUENCE OF WlStaticWdsMACAddrEntry .1.3.6.1.4.1.5504.2.5.46.1.5 |
wlStaticWdsMACAddrEntryTable of statically configured Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled. WlStaticWdsMACAddrEntry .1.3.6.1.4.1.5504.2.5.46.1.5.1 |
wlStaticWdsMACIndexThe index into the static WDS Remote MAC Address table for a wireless LAN interface. Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.5.1.1 |
wlStaticWdsRemoteMACAddrThe MAC address that is permitted WDS bridge access to the wireless LAN interface.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.5.1.2 |
wlScanWdsMACAddrTableTable of scanned Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled. SEQUENCE OF WlScanWdsMACAddrEntry .1.3.6.1.4.1.5504.2.5.46.1.6 |
wlScanWdsMACAddrEntryTable of scanned Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled. WlScanWdsMACAddrEntry .1.3.6.1.4.1.5504.2.5.46.1.6.1 |
wlScanWdsMACIndexThe index into the WDS scanned table of Remote MAC Addresses that may access a wireless LAN interface. Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.6.1.1 |
wlScanWdsRemoteMACAddrThe MAC address previously scanned that is permitted WDS bridge access to the wireless LAN interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.6.1.2 |
wlAuthStationsTableTable of authenicated wireless stations and their status information. SEQUENCE OF WlAuthStationsEntry .1.3.6.1.4.1.5504.2.5.46.1.7 |
wlAuthStationsEntryTable of authenicated wireless stations and their status information. WlAuthStationsEntry .1.3.6.1.4.1.5504.2.5.46.1.7.1 |
wlAuthStationIndexThe index into the Authentication Stations table. Unsigned32 .1.3.6.1.4.1.5504.2.5.46.1.7.1.1 |
wlAuthStationMACAddrThe MAC address of the authenticated station.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.7.1.2 |
wlAuthStationAssociationStatusTrue if the station has been associated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.7.1.3 |
wlAuthStationAuthorizationStatusTrue if the station has been authorized.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.46.1.7.1.4 |
wlAuthStationSSIDSSID with which the station has authenticated.ro OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.7.1.5 |
wlAuthStationInterfaceInterface through which the station has authenticated.ro OCTET STRING .1.3.6.1.4.1.5504.2.5.46.1.7.1.6 |
zhnWirelessConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.46.2 |
zhnWirelessGroups OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.46.2.1 |
zhnWlBaseCfgGroupA collection of Zhone Wireless objects that describe the WLAN adapter basic configuration and status information. Unknown .1.3.6.1.4.1.5504.2.5.46.2.1.1 |
zhnWlVirtualCfgGroupA collection of Zhone Wireless objects that describe the WLAN virtual interface configuration and status information. Unknown .1.3.6.1.4.1.5504.2.5.46.2.1.2 |
zhnWlSecurityGroupA collection of Zhone Wireless objects that describe the WLAN virtual interface security information. Unknown .1.3.6.1.4.1.5504.2.5.46.2.1.3 |
zhnWlMACFilterGroupA collection of Zhone Wireless objects that describe the WLAN MAC filter rules. Unknown .1.3.6.1.4.1.5504.2.5.46.2.1.4 |
zhnWlStaticWdsMACAddrGroupA collection of Zhone Wireless objects that describe the WLAN statically configured WDS MAC addresses. Unknown .1.3.6.1.4.1.5504.2.5.46.2.1.5 |
zhnWlScanWdsMACAddrGroupA collection of Zhone Wireless objects that describe the WLAN WDS Scanned MAC addresses. Unknown .1.3.6.1.4.1.5504.2.5.46.2.1.6 |
zhnWlAuthStationsGroupA collection of Zhone Wireless objects that indentify the stations that have authenticated with the Access Point. Unknown .1.3.6.1.4.1.5504.2.5.46.2.1.7 |
zhnWirelessCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.46.2.2 |
zhnWirelessComplianceThe Compliance statement for SNMP entities which manage the Zhone CPE Wireless Configuration, Status and Statistics Information Unknown .1.3.6.1.4.1.5504.2.5.46.2.2.1 |