ZHNVOICE
This file defines the private Enterprise MIB extensions that define voice related objects supported by the Zhone VoIP CPEs.
Main OID:
zhnVoice.1.3.6.1.4.1.5504.2.5.40
215
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
215 total| Object Name |
|---|
zhnVoiceThis file defines the private Enterprise MIB extensions that define voice related objects supported by the Zhone VoIP CPEs. MODULE-IDENTITY .1.3.6.1.4.1.5504.2.5.40 |
zhnVoiceNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.40.0 |
voiceRegistrationUpThis notification is generated when the Voice Client has successfully registered with the configured Call Agent. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.2.5.40.0.1 |
voiceRegistrationDownThis notification is generated when the Voice Client registration with the configured Call Agent fails. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.2.5.40.0.2 |
zhnVoiceServiceObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.40.1 |
voiceServiceTableTable of voice services, including voice profiles, capabilities, and physical interfaces SEQUENCE OF VoiceServiceEntry .1.3.6.1.4.1.5504.2.5.40.1.1 |
voiceServiceEntryTable of voice services including voice profiles, capabilities, and physical interfaces VoiceServiceEntry .1.3.6.1.4.1.5504.2.5.40.1.1.1 |
voiceProfileNumberOfEntriesVoice Service Indexro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.1.1.1 |
voiceBoundIfNameName of the network interface that the voice service should run on. For example, brvlan300.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.1.1.2 |
voiceBoundIpAddrIP address of the network interface that the bound interface is configured for.ro IpAddress .1.3.6.1.4.1.5504.2.5.40.1.1.1.3 |
voiceServiceIndexVoice Service Indexro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.1.1.4 |
capabilities OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.40.1.2 |
capabilitiesTableTable of voice service capabilities SEQUENCE OF CapabilitiesEntry .1.3.6.1.4.1.5504.2.5.40.1.2.1 |
capabilitiesEntryTable of voice service capabilities CapabilitiesEntry .1.3.6.1.4.1.5504.2.5.40.1.2.1.1 |
maxProfileCountMaximum total number of distinct voice profiles supported.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.1 |
maxLineCountMaximum total number of lines supported across all profiles. This parameter is applicable only for a VoIP endpoint.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.2 |
maxSessionsPerLineMaximum number of voice sessions supported for any given line across all profiles. A value greater than one indicates support for CPE provided conference calling. This parameter is applicable only for a VoIP endpoint.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.3 |
maxSessionCountMaximum total number of voice sessions supported across all lines and profiles. This might differ from MaxLineCount if each line can support more than one session for CPE provided conference calling. This value MAY be less than the product of maxLineCount and maxSessionsPerLine.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.4 |
signalingProtocolsComma-separated list of signaling protocols supported. Each item is an enumeration of: SIP MGCP MGCP-NCS H.248 H.323 Each entry MAY be appended with a version indicator in the form protocol/X.Y. For example: SIP/2.0ro OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.5 |
regionsComma-separated list of geographic regions supported by the CPE. Each item in the list MUST be an alpha-2 (two-character alphabetic) country code as specified by ISO 3166. An empty list indicates that the CPE does not support region-based customization via the Region parameter in the VoiceService.{i}.VoiceProfile.{i} object.ro OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.6 |
rtcpSupport for RTCP. A true value indicates support for the object VoiceService.{i}.VoiceProfile.{i}.RTP.RTCP. This parameter is applicable only for a VoIP endpoint.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.7 |
srtpSupport for SRTP. A true value indicates support for the object VoiceService.{i}.VoiceProfile.{i}.RTP.SRTP. This parameter is applicable only for a VoIP endpoint.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.8 |
rtpRedundancySupport for RTP payload redundancy as defined in RFC 2198. A true value indicates support for VoiceService.{i}.VoiceProfile.{i}.RTP.Redundancy. This parameter is applicable only for a VoIP endpoint.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.9 |
dscpCoupledA true value indicates that the CPE is constrained such that transmitted call control packets use the same DSCP marking as transmitted RTP packets. If the value is true, the CPE MUST NOT support the DSCPMark parameter for call control. This parameter is applicable only for a VoIP endpoint.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.10 |
ethernetTaggingCoupledA true value indicates that the CPE is constrained such that transmitted call control packets use the same Ethernet tagging (VLAN ID Ethernet Priority) as transmitted RTP packets. If the value is true, the CPE MUST NOT support the VLANIDMark or EthernetPriorityMark parameters within a call control object (e.g., SIP, MGCP, or H323). This parameter is applicable only for a VoIP endpoint.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.11 |
pstnSoftSwitchOverA true value indicates the CPE is capable of supporting the PSO_Activate Facility Action, which allows a call to be switched to a PSTN FXO (Foreign eXchange Office) line. This parameter is applicable only for a VoIP endpoint.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.12 |
faxT38Support for T.38 fax. A true value indicates support for the object VoiceService.{i}.VoiceProfile.{i}.FaxT38. This parameter is applicable only for a VoIP endpoint.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.13 |
faxPassThroughSupport for fax pass-through. A true value indicates support for the parameter VoiceService.{i}.VoiceProfile.{i}.FaxPassThrough. This parameter is applicable only for a VoIP endpoint.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.14 |
modemPassThroughSupport for modem pass-through. A true value indicates support for the parameter VoiceService.{i}.VoiceProfile.{i}.ModemPassThrough. This parameter is applicable only for a VoIP endpoint.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.15 |
toneGenerationSupport for tone generation. A true value indicates support for the object VoiceService.{i}.VoiceProfile.{i}.Tone. A true value also indicates that the ToneDescriptionsEditable, PatternBasedToneGeneration, and FileBasedToneGeneration parameters in this object are present. This parameter is applicable only for a VoIP endpoint.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.16 |
ringGenerationSupport for ring generation. A true value indicates support for control of ring generation via the VoiceService.{i}.VoiceProfile.{i}.Line.{i}.Ringer object. A true value also indicates that the RingDescriptionsEditable, PatternBasedRingGeneration, and FileBasedRingGeneration parameters in this object are present. This parameter is applicable only for a VoIP endpoint.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.17 |
digitMapCapabilitiesSupport for a configurable digit map string. A true value indicates full support for the VoiceService.{i}.VoiceProfile.{i}.DigitMap parameter.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.18 |
numberingPlanSupport for a configurable numbering plan. A true value indicates support for a configurable numbering plan via the VoiceService.{i}.VoiceProfile.{i}. NumberingPlan object. This parameter is applicable only for a VoIP endpoint.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.19 |
buttonMapSupport for a configurable button map. A true value indicates support for a configurable button map via the VoiceService.{i}.VoiceProfile.{i}.ButtonMap NumberingPlan object. This parameter is applicable only for a VoIP endpoint.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.20 |
voicePortTestsSupport for remotely accessible voice-port tests. A true value indicates support for the VoiceService.{i}.PhyInterface.{i}.Tests object. This parameter is applicable only for a VoIP endpoint.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.21 |
capabilitiesSIPTableTable of SIP-specific capabilities. Applicable only if SIP is among the list of supported protocols. SEQUENCE OF CapabilitiesSIPEntry .1.3.6.1.4.1.5504.2.5.40.1.2.2 |
capabilitiesSIPEntryTable of SIP-specific capabilities. Applicable only if SIP is among the list of supported protocols. CapabilitiesSIPEntry .1.3.6.1.4.1.5504.2.5.40.1.2.2.1 |
roleThe role of this VoIP CPE. Enumeration of: UserAgent BackToBackUserAgents OutboundProxy. A single VoiceService instance MUST have only one role. If a device includes the capabilities for more than one role, each role MUST be represented as separate VoiceService instance.ro OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.2.2.1.1 |
extensionsSIPComma-separated list of SIP extension methods supported. SIP extension methods MUST be in the form of the method name in upper case. The list MAY include vendor-specific extensions, which MUST use the format defined in TR-106. Examples: REFER INFO X_EXAMPLE-COM_MyExtro OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.2.2.1.2 |
transportsComma-separated list of SIP transport protocols supported. Each entry is an enumeration of: UDP TCP TLS SCTP The list MAY include vendor-specific transports, which MUST use the format defined in TR-106ro OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.2.2.1.3 |
uriSchemesComma-separated list of URI schemes supported beyond the URI schemes required by the SIP specification. Each URI scheme is given by the URI prefix, without the colon separator. Example: tel, faxro OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.2.2.1.4 |
eventSubscriptionSupport for SIP event subscription. A true value indicates support for the VoiceService.{i}.VoiceProfile.{i}.SIP.EventSubscribe and VoiceService.{i}.VoiceProfile.{i}.Line.{i}.SIP.EventSubscribe.{i} objects.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.2.1.5 |
responseMapSupport for SIP response map. A true value indicates support for the VoiceService.{i}.VoiceProfile.{i}.SIP.ResponseMap object. This parameter is applicable only for a VoIP endpoint.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.2.1.6 |
tlsKeyExchangeProtocolsComma-separated list of authentication protocols supported for TLS transport. Each item listed is an enumeration of: RSA DSS The list MAY include vendor-specific protocols, which MUST use the format defined in TR-106. Support for this parameter is applicable only if the Transports parameter in this object includes the value TLS and the TLSEncryptionProtocols parameter in this object is present and non-empty and includes at least one value other than Nullro OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.2.2.1.7 |
capabilitiesMGCPTableTable of MGCP-specific capabilities. Applicable only if MGCP is among the list of supported protocols. SEQUENCE OF CapabilitiesMGCPEntry .1.3.6.1.4.1.5504.2.5.40.1.2.3 |
capabilitiesMGCPEntryTable of MGCP-specific capabilities. Applicable only if MGCP is among the list of supported protocols. CapabilitiesMGCPEntry .1.3.6.1.4.1.5504.2.5.40.1.2.3.1 |
extensionsMGCPComma-separated list of MGCP extension methods supported. MGCP extension methods MUST be in the form of the method name in upper case. The list MAY include vendor-specific extensions, which MUST use the format defined in TR-106. Examples: REFER INFO X_EXAMPLE-COM_MyExtro OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.2.3.1.1 |
capabilitiesCodecsTableTable to describe the set of supported codecs. Each entry refers to a distinct combination of codec and bit rate. The table MUST include a distinct entry for each supported combination of these parameters. Applicable only for a VoIP endpoint. SEQUENCE OF CapabilitiesCodecsEntry .1.3.6.1.4.1.5504.2.5.40.1.2.4 |
capabilitiesCodecsEntryThe Codecs Service table MUST include a distinct entry for each supported combination of these parameters. CapabilitiesCodecsEntry .1.3.6.1.4.1.5504.2.5.40.1.2.4.1 |
codecIndexCodecs table indexro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.2.4.1.1 |
entryIDCodecs table indexro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.2.4.1.2 |
codecIdentifier of the type of codec. Enumeration of: G.711MuLaw G.711ALaw G.726 G.729 G.729a G.729e G.728 G.723.1 G.722 G.722.1 G.722.2 GSM-FR GSM-HR GSM-EFR iLBC The parameter MAY instead be a vendor-specific codec, which MUST be in the format defined in TR-106. For example: X_EXAMPLE-COM_MyCodecro OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.2.4.1.3 |
bitRateBit rate, in bits per second. The value MUST be among the values appropriate for the specified codec.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.2.4.1.4 |
packetizationPeriodComma-separate list of supported packetization periods, in milliseconds, or continuous ranges of packetization periods. Ranges are indicated as a hyphen-separated pair of unsigned integers. Examples: 20 indicates a single discrete value 10, 20, 30 indicates a set of discrete values. 5-40 indicates a continuous inclusive range. 5-10, 20, 30 indicates a continuous range in addition to a set of discrete values. A range MUST only be indicated if all values within the range are supported.ro OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.2.4.1.5 |
silenceSuppressionIndicates support for silence suppression for this codec.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.2.4.1.6 |
voiceProfiles OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.40.1.3 |
voiceProfileTableTable of voice profile objects SEQUENCE OF VoiceProfileEntry .1.3.6.1.4.1.5504.2.5.40.1.3.1 |
voiceProfileEntryObject associated with a collection of voice lines with common characteristics. By default, a single VoiceProfile object SHOULD be present in a VoiceService, initially in the disabled state. VoiceProfileEntry .1.3.6.1.4.1.5504.2.5.40.1.3.1.1 |
voiceProfileIndexVoice Profile Indexro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.1 |
voiceProfileEnableEnables or disables all lines in this profile, or places it into a quiescent state. Enumeration of: Disabled Quiescent Enabled On creation, a profile MUST be in the Disabled state. In the Quiescent state, in-progress sessions remain intact, but no new sessions are allowed. Support for the Quiescent state in a CPE is optional. If this parameter is set to Quiescent in a CPE that does not support the Quiescent state, it MUST treat it the same as the Disabled state.rw VoiceProfileLineStateType .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.2 |
voiceProfileResetWhen written as true, forces the all lines in this profile to be reset, causing it to re-initialize and perform all start-up actions such as registration. Always False when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.3 |
voiceProfileNumberOfLinesNumber of instances of Line within this VoiceProfile. Applicable only for a VoIP endpoint.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.4 |
voiceProfileNameHuman-readable string to identify the profile instance.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.5 |
voiceProfileSignalingProtocolThe protocol to be used for this profile. A single protocol selected from among the available protocols indicated in VoiceService.{i}.Capabilities.SignalingProtocols.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.6 |
voiceProfileMaxSessionsLimit on the number of simultaneous voice sessions across all lines in this profile. Must be less than or equal to VoiceService.{i}.Capabilities.MaxSessionCount. (This MAY be greater than the number of lines if each line can support more than one session, for example for CPE provided conference calling.)rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.7 |
voiceProfileDtmfMethodMethod by which DTMF digits MUST be passed. Enumeration of: InBand RFC2833 SIPInfo If the parameter dtmfMethodG711 is non-empty, then this parameter applies only when the current codec is not G.711. The value SIPInfo is applicable only if the SignalingProtocol is SIP. This parameter is applicable only for a VoIP endpoint.rw DTMFMethodValues .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.8 |
voiceProfileDtmfMethodG711Method by which DTMF digits MUST be passed if the current codec is G.711. Enumeration of: InBand RFC2833 SIPInfo An empty value for this parameter indicates that the value of the dtmfMethod parameter is to apply whether or not the current codec is G.711. The value SIPInfo is applicable only if the SignalingProtocol is SIP. This parameter is applicable only for a VoIP endpoint.rw DTMFMethodValues .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.9 |
voiceProfileHookFlashMethodThis object specifies which hookflash relay method to use. A value of None implies hook flash will be handled locally. A value of SIPInfo implies the hook flash will be sent via the SIP info.rw HookFlashMethodValues .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.10 |
voiceProfileRegionThe geographic region associated with this profile. This MAY be used by the CPE to customize localization settings. The value MUST be either one value selected from among the available regions indicated in VoiceService.{i}.Capabilities.Regions, or MAY be empty. An empty value indicates that the region is unspecified and the CPE SHOULD use default localization settings. This parameter is applicable only if VoiceService.{i}.Capabilities.Regions is non-empty.rw RegionValues .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.11 |
voiceProfileDigitMapDigit map controlling the transmission of dialed digit information. The string defines the criteria to be met as digits are collected before an outgoing request (e.g., a SIP INVITE) can be initiated. The syntax of this parameter is exactly the syntax used by MGCP as defined in RFC3435, section 2.1.5. This parameter is applicable only if the device supports a dialing mechanism for which a dialing plan is needed (for example, a device with an explicit Dial button may not need to be aware of the dialing plan) and if the device does not already support a dialing plan mechanism for this profile (e.g. in-band via MGCP). If this object is supported, the capability VoiceService.{i}.Capabilities.DigitMap MUST be equal to true. Applicable only for a VoIP endpoint.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.12 |
voiceProfileDigitMapEnableEnables the use of the DigitMap parameter in this object. When enabled, the content of the VoiceService.{i}.VoiceProfile.{i}.NumberingPlan object, if present, MUST be ignored. This parameter is required if and only if both the digitMap object and the VoiceService.{i}.VoiceProfile.{i}.NumberingPlan object are present. Applicable only for a VoIP endpoint.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.13 |
voiceProfileStunEnableEnable or disable use of STUN to allow operation through NAT. Note: enabling STUN is to be interpreted as enabling the use of STUN for discovery, not use as a keep-alive mechanism.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.14 |
voiceProfileStunServerDomain name or IP address of the STUN server.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.15 |
voiceProfileStunServerPortSTUN server port number.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.16 |
voiceProfileLogServerDomain name or IP address of the Log server.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.17 |
voiceProfileLogServerPortLog server port number.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.18 |
voiceProfileSpNumService Provider number.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.19 |
voiceProfileV18SupportEnable or disable v18 support.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.20 |
voiceProfileSwitchTypeConfigure the VoIP Switch Type. Enumeration of: broadSoft(1), cirpack(2), genband(3), metaSwitch(4), nortel(5), networkOnly(6), taqua(7), softX3000(8), axtelCS2K(9), copperCom(10), openSer(11), utStarCom(12), ericsson(13), unknown(99)rw VoiceProfileSwitchTypes .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.21 |
voiceProfileServiceProviderTableTable of voice profile service provider objects SEQUENCE OF VoiceProfileServiceProviderEntry .1.3.6.1.4.1.5504.2.5.40.1.3.2 |
voiceProfileServiceProviderEntryService provider objects associated with a specific voice profile. VoiceProfileServiceProviderEntry .1.3.6.1.4.1.5504.2.5.40.1.3.2.1 |
voiceProfileServiceProviderNameHuman-readable string identifying the service provider.ro OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.2.1.1 |
voiceProfileSIPTableTable of SIP objects for a specific voice profile SEQUENCE OF VoiceProfileSIPEntry .1.3.6.1.4.1.5504.2.5.40.1.3.3 |
voiceProfileSIPEntrySIP objects associated with a specific voice profile. VoiceProfileSIPEntry .1.3.6.1.4.1.5504.2.5.40.1.3.3.1 |
voiceProfileSIPProxyServerHost name or IP address of the SIP proxy server. All SIP signaling traffic MUST be sent to the host indicated by this parameter and the port indicated by the ProxyServerPort parameter unless OutboundProxy is non-empty or a different route was discovered during normal operations SIP routing operation. Regardless of which host the traffic gets sent to (the ProxyServer or the OutboundProxy), the value of this parameter MUST be used to derive the URI placed into the SIP Route header field of all requests originated by this end-point unless a different proxy host was discovered dynamically during normal SIP routing operations.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.1 |
voiceProfileSIPProxyServerPortDestination port to be used in connecting to the SIP server.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.2 |
voiceProfileSIPProxyServerTransportTransport protocol to be used in connecting to the SIP server. Must be chosen from among the transports supported, as indicated by VoiceService.{i}.Capabilities.SIP.Transports. Enumeration of: UDP TCP TLS SCTPrw VoiceTransportValues .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.3 |
voiceProfileSIPRegistrarServerHost name or IP address of the SIP registrar server. If this parameter is empty, the CPE MUST obtain all of the registrar server configuration information, including host name or IP address, port, and transport protocol, from the corresponding Proxy Server parameters (ProxyServer, Proxy-ServerPort, and ProxyServerTransport), ignoring all of the registrar server parameters (Registrar-Server, RegistrarServerPort and RegistrarServer-Transport).rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.4 |
voiceProfileSIPRegistrarServerPortDestination port to be used in connecting to the SIP registrar server. If the RegistrarServer parameter is empty, the CPE MUST obtain all of the registrar server configuration information, including host name or IP address, port, and transport protocol, from the corresponding ProxyServer parameters (Proxy-Server, ProxyServerPort, and ProxyServer- Transport), ignoring all of the registrar server parameters (RegistrarServer, RegistrarServerPort and RegistrarServerTransport).rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.5 |
voiceProfileSIPRegistrarServerTransportTransport protocol to be used in connecting to the registrar server. Must be chosen from among the transports supported, as indicated by VoiceService.{i}.Capabilities.SIP.Transports. Enumeration of: UDP TCP TLS SCTP If the RegistrarServer parameter is empty, the CPE MUST obtain all of the registrar server configuration information, including host name or IP address, port, and transport protocol, from the corresponding ProxyServer parameters (Proxy-Server, ProxyServerPort, and ProxyServer- Transport), ignoring all of the registrar server parameters (Registrar-Server, RegistrarServerPort and RegistrarServer-Transport).rw VoiceTransportValues .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.6 |
voiceProfileSIPToTagMatchingEnable/Disable SIP to tag matching.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.7 |
voiceProfileSIPMusicServerMusic server address.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.8 |
voiceProfileSIPMusicServerPortMusic server port number.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.9 |
voiceProfileSIPPlarGatewayPLAR gateway address.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.10 |
voiceProfileSIPPlarPortPlar gateway port number.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.11 |
voiceProfileSIPUserAgentDomainCPE domain string. If empty, the CPE SHOULD se its IP address as the domain.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.12 |
voiceProfileSIPUserAgentPortPort used for incoming call control signaling.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.13 |
voiceProfileSIPUserAgentTransportTransport protocol to be used for incoming call control signaling. Must be chosen from among the transports supported, as indicated by VoiceService.{i}.Capabilities.SIP.Transports. Enumeration of: UDP TCP TLS SCTPrw VoiceTransportValues .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.14 |
voiceProfileSIPOutboundProxyHost name or IP address of the outbound proxy. If a non-empty value is specified, the SIP endpoint MUST send all SIP traffic (requests and responses) to the host indicated by this parameter and the port indicated by the OutboundProxyPort parameter. This MUST be done regardless of the routes discovered using normal SIP operations, including use of Route headers initialized from Service-Route and Record-Route headers previously received. The OutboundProxy value is NOT used to generate the URI placed into the Route header of any requests.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.15 |
voiceProfileSIPOutboundProxyPortDestination port to be used in connecting to the outbound proxy. This parameter MUST be ignored unless the value of the OutboundProxy parameter in this object is non-empty.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.16 |
voiceProfileSIPOrganizationText string to be used in the Organization header.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.17 |
voiceProfileSIPRegistrationPeriodPeriod over which the user agent must periodically register, in seconds.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.18 |
voiceProfileSIPRegisterExpiresRegister request Expires header value, in seconds.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.19 |
voiceProfileSIPRegisterRetryIntervalRegister retry interval, in seconds.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.20 |
voiceProfileSIPDSCPMarkDiffserv code point to be used for outgoing SIP signaling packets.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.21 |
voiceProfileSIPVLANIDMarkVLAN ID (as defined in 802.1Q) to be used for outgoing SIP signaling packets for this profile. A value of -1 indicates the default value is to be used. If either the VLANIDMark or EthernetPriorityMark are greater than zero, then the outgoing frames MUST be tagged. Otherwise, the outgoing frames MAY be tagged or untagged.rw Integer32 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.22 |
voiceProfileSIPEthernetPriorityMarkEthernet priority code (as defined in 802.1D) to be used for outgoing SIP signaling packets for this profile. A value of -1 indicates the default value is to be used. If either the VLANIDMark or EthernetPriorityMark are greater than zero, then the outgoing frames MUST be tagged. Otherwise, the outgoing frames MAY be tagged or untagged.rw Integer32 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.23 |
voiceProfileSIPInterdigitTimeoutInterdigit timeout, in milliseconds. This the value that will be used for T in the dial string. Four Seconds is the default value before the dial string is considered complete. Fifteen seconds is the maximum.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.24 |
voiceProfileSIPAddressModeConfigure the SIP Client Name addressing mode. An enumeration of: ip(1) ipBracketed(2) domainName(3) Ip and IpBracketed will cause the SIP Client name to be the Bound Interface IP address. Name will allow the user to input any text field, usually a Domain Name.rw VoiceProfileAddressModes .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.25 |
voiceProfileSIPEventSubscribeTableTable of SIP subscriber event objects for a specific voice profile SEQUENCE OF VoiceProfileSIPEventSubscribeEntry .1.3.6.1.4.1.5504.2.5.40.1.3.4 |
voiceProfileSIPEventSubscribeEntrySIP subscriber events objects associated with a specific voice profile. VoiceProfileSIPEventSubscribeEntry .1.3.6.1.4.1.5504.2.5.40.1.3.4.1 |
voiceProfileSIPEventSubscribeEventSIP event name to appear in the EVENT header of the SIP SUBSCRIBE request.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.4.1.1 |
voiceProfileSIPEventSubscribeNotifierHost name or IP address of the event notify server.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.4.1.2 |
voiceProfileSIPEventSubscribeNotifierPortDestination port to be used in connecting to the event notifier.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.4.1.3 |
voiceProfileSIPEventSubscribeNotifierTransportTransport protocol to be used in connecting to the registrar server. Must be chosen from among the transports supported, as indicated by VoiceService.{i}.Capabilities.SIP.Transports. Enumeration of: UDP TCP TLS SCTPrw VoiceTransportValues .1.3.6.1.4.1.5504.2.5.40.1.3.4.1.4 |
voiceProfileMGCPTableTable of MGCP objects for a specific voice profile SEQUENCE OF VoiceProfileMGCPEntry .1.3.6.1.4.1.5504.2.5.40.1.3.5 |
voiceProfileMGCPEntryMGCP objects associated with a specific voice profile. VoiceProfileMGCPEntry .1.3.6.1.4.1.5504.2.5.40.1.3.5.1 |
voiceProfileMGCPCallAgent1Host name or IP address of the main MGCP call agent.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.5.1.1 |
voiceProfileMGCPUserUser string used in accessing the call agent.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.5.1.2 |
voiceProfilePersistentNotifyThis field directs the MGCP stack to notify the switch for every hd or hu event when in the RQNT is Q:LOOP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.3.5.1.3 |
voiceProfileMGCPAddressModeConfigure the MGCP Client Name addressing mode. An enumeration of: ip(1) ipBracketed(2) domainName(3) Ip and IpBracketed will cause the MGCP Client name to be the Bound Interface IP address. Name will allow the user to input any text field, usually a Domain Name.rw VoiceProfileAddressModes .1.3.6.1.4.1.5504.2.5.40.1.3.5.1.4 |
voiceProfileRTPTableTable of RTP objects for a specific voice profile SEQUENCE OF VoiceProfileRTPEntry .1.3.6.1.4.1.5504.2.5.40.1.3.6 |
voiceProfileRTPEntryRTP objects associated with a specific voice profile. VoiceProfileRTPEntry .1.3.6.1.4.1.5504.2.5.40.1.3.6.1 |
voiceProfileRTPLocalPortMinBase of port range to be used for incoming RTP streams for this profile.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.6.1.1 |
voiceProfileRTPLocalPortMaxTop of port range to be used for incoming RTP streams for this profile.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.6.1.2 |
voiceProfileRTPDSCPMarkDiffserv code point to be used for outgoing RTP packets for this profile. It is RECOMMENDED that by default the DSCP for RTP traffic be set to the value to indicate EF traffic.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.6.1.3 |
voiceProfileRTPTelephoneEventPayloadTypePayload type to be used for RTP telephone events. This parameter indicates the payload type to be used for DTMF events if RFC 2833 transmission of DTMF information is in use.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.6.1.4 |
voiceProfileFaxT38TableTable of Fax T.38 objects for a specific voice profile SEQUENCE OF VoiceProfileFaxT38Entry .1.3.6.1.4.1.5504.2.5.40.1.3.7 |
voiceProfileFaxT38EntryFax T38 objects associated with a specific voice profile. VoiceProfileFaxT38Entry .1.3.6.1.4.1.5504.2.5.40.1.3.7.1 |
voiceProfileFaxT38EnableEnable or disable the use of T.38.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.3.7.1.1 |
voiceProfileFaxT38BitRateMaximum data rate for fax. Enumeration of the following values: 2400 4800 7200 9600 12000 14400 33600rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.7.1.2 |
voiceProfileFaxT38HighSpeedPacketRateThe rate at which high speed data will be sent across the network in milliseconds. Enumeration of the following values: 10 20 30 40rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.7.1.3 |
voiceProfileLines OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.40.1.3.8 |
voiceProfileLineTableTable of voice profile line objects SEQUENCE OF VoiceProfileLineEntry .1.3.6.1.4.1.5504.2.5.40.1.3.8.1 |
voiceProfileLineEntryObject associated with a distinct voice line. Support for adding and removing lines is conditional on whether the CPE supports more than one line in total as indicated by VoiceService.{i}.Capabilities.MaxLineCount. By default, on creation of a given VoiceProfile, a single Line object MUST be present, initially in the disabled state. Applicable only for a VoIP endpoint. VoiceProfileLineEntry .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1 |
voiceProfileLineIndexVoice Profile Line Indexro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.1 |
voiceProfileLineEnableEnables or disables this line, or places it into a quiescent state. Enumeration of: Disabled Quiescent Enabled On creation, a line MUST be in the Disabled state. In the Quiescent state, in-progress sessions remain intact, but no new sessions are allowed. Support for the Quiescent state in a CPE is optional. If this parameter is set to Quiescent in a CPE that does not support the Quiescent state, it MUST treat it the same as the Disabled state (and indicate Disabled in the Status parameter).rw VoiceProfileLineStateType .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.2 |
voiceProfileLineDirectoryNumberDirectory number associated with this line. May be used to identify the line to the user. In case of H.323 signaling, this MUST be an E.164 number.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.3 |
voiceProfileLineStatusIndicates the status of this line. Enumeration of: Up Initializing Registering Unregistering Error Testing Quiescent Disabledro VoiceLineStatusValues .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.4 |
voiceProfileLineCallStateIndicates the call state for this line. Enumeration of: Idle Calling Ringing Connecting InCall Hold Disconnectingro VoiceLineCallStateValues .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.5 |
voiceProfileLinePhyReferenceListA comma separated list of Physical Interface Identifiers that this Line is associated with. Each item corresponds to the value of the InterfaceID paraeter in a particular instance of the VoiceService.{i}.PhyInterface.{i}. table.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.6 |
voiceProfileLineCMAcntNumIndicates the call manager account number associated with this line instance.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.7 |
voiceProfileLineOnhookState of phones Receiver. On Hook if True, OffHook if False.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.8 |
voiceProfileLineRowStatusThe SNMP RowStatus of the current row.rw ZhoneRowStatus (Zhone-TC) .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.9 |
voiceProfileLineSIPTableTable of voice profile line SIP objects SEQUENCE OF VoiceProfileLineSIPEntry .1.3.6.1.4.1.5504.2.5.40.1.3.8.2 |
voiceProfileLineSIPEntryLine SIP objects associated with a specific voice profile. VoiceProfileLineSIPEntry .1.3.6.1.4.1.5504.2.5.40.1.3.8.2.1 |
voiceProfileLineSIPAuthUserNameUsername used to authenticate the connection to the server.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.8.2.1.1 |
voiceProfileLineSIPAuthPasswordPassword used to authenticate the connection to the server. When read, this parameter returns an empty string, regardless of the actual value.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.8.2.1.2 |
voiceProfileLineSIPURIURI by which the user agent will identify itself for this line. If empty, the actual URI used in the SIP signaling SHOULD be automatically formed by the CPE as sip:UserNamerw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.8.2.1.3 |
voiceProfileLineSIPPlarUserNamePLAR gateway username.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.8.2.1.4 |
voiceProfileLineMGCPTableTable of voice profile line MGCP objects SEQUENCE OF VoiceProfileLineMGCPEntry .1.3.6.1.4.1.5504.2.5.40.1.3.8.3 |
voiceProfileLineMGCPEntryLine MGCP objects associated with a specific voice profile. VoiceProfileLineMGCPEntry .1.3.6.1.4.1.5504.2.5.40.1.3.8.3.1 |
voiceProfileLineMGCPLineNameUsed to identify the line when using MGCP signaling. If empty, the CPE SHOULD use the default names aaln/1, etc.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.8.3.1.1 |
voiceProfileLineProcessingTableTable of voice profile line processing objects SEQUENCE OF VoiceProfileLineProcessingEntry .1.3.6.1.4.1.5504.2.5.40.1.3.8.4 |
voiceProfileLineProcessingEntryLine Processing objects associated with a specific voice profile. VoiceProfileLineProcessingEntry .1.3.6.1.4.1.5504.2.5.40.1.3.8.4.1 |
voiceProfileLineTransmitGainGain in units of 0.1 dB to apply to the transmitted voice signal prior to encoding. This gain is a modifier of the default transmit-gain, which is unspecified.rw Integer32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.4.1.1 |
voiceProfileLineReceiveGainGain in units of 0.1 dB to apply to the received voice signal after decoding. This gain is a modifier of the default receive-gain, which is unspecified.rw Integer32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.4.1.2 |
voiceProfileLineEchoCancellationEnableEnable or disable echo cancellation for this line.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.3.8.4.1.3 |
voiceProfileLineEchoCancellationInUseIndication of whether or not echo cancellation is currently in use for this line.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.3.8.4.1.4 |
voiceProfileLineCodecTableTable of voice profile CODEC objects, per line SEQUENCE OF VoiceProfileLineCodecEntry .1.3.6.1.4.1.5504.2.5.40.1.3.8.5 |
voiceProfileLineCodecEntryThe Voice Line CODEC list MUST include a distinct entry for each supported combination of these parameters. VoiceProfileLineCodecEntry .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1 |
voiceProfileLineCodecIndexUnique identifier for each entry in this table. The value MUST match that of the corresponding entry in the VoiceService.{i}.Capabilities.Codecs table.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.1 |
voiceProfileLineCodecEntryIDUnique identifier for each entry in this table. The value MUST match that of the corresponding entry in the VoiceService.{i}.Capabilities.Codecs table.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.2 |
voiceProfileLineCodecIdentifier of the codec type. The value MUST match that of the corresponding entry in the VoiceService.{i}.Capabilities.Codecs table.ro OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.3 |
voiceProfileLineCodecBitRateBit rate, in bits per second. The value MUST match that of the corresponding entry in the VoiceService.{i}.Capabilities.Codecs table.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.4 |
voiceProfileLineCodecPacketizationPeriodComma-separate list of supported packetization periods, in milliseconds, or continuous ranges of packetization periods as defined in VoiceService.{i}.Capabilities.Codecs.PacketizationPeriod. The set of packetization periods may be restricted by modifying the value of this parameter to a more restricted set of values than is listed in VoiceService.{i}.Capabilities.Codecs.PacketizationPeriod. The CPE MUST ignore any values or portions of ranges outside of those specified in VoiceService.{i}.Capabilities.Codecs.Packetization.Period.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.5 |
voiceProfileLineCodecSilenceSuppressionIndicates support for silence suppression for this codec. If silence suppression is supported, it can be disabled for this codec/bit-rate by setting this parameter to false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.6 |
voiceProfileLineCodecEnableEnable or disable the use of this combination of codec parameters.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.7 |
voiceProfileLineCodecPriorityIndicates the priority for this combination of codec parameters, where 1 is the highest priority. Where the priority differs between entries in this table, the CPE SHOULD use the highest priority (lowest numbered) entry among those supported by the remote endpoint and consistent with the available bandwidth. Where the priorities are equal among multiple entries, the CPE MAY apply a local criterion for choosing among them.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.8 |
voiceProfileLineCallingFeaturesTableTable of voice calling features, per line SEQUENCE OF VoiceProfileLineCallingFeaturesEntry .1.3.6.1.4.1.5504.2.5.40.1.3.8.6 |
voiceProfileLineCallingFeaturesEntryThe list of voice line calling features supported. VoiceProfileLineCallingFeaturesEntry .1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1 |
voiceProfileLineCallingFeatureCallerIDEnableEnable or disable the transmission of caller ID information on outgoing calls.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1.1 |
voiceProfileLineCallingFeatureCallerIDNameString used to identify the caller.rw OCTET STRING .1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1.2 |
voiceProfileLineCallingFeatureCallWaitingEnableEnable or disable call waiting in the endpoint.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1.3 |
voiceProfileLineCallingFeatureMaxSessionsIndicates the maximum number of simultaneous sessions that may be conferenced together by the endpoint. For example, to enable three way conferencing, set the value of this object to 2. This value SHOULD be less than the value of VoiceService.{i}.Capabilities.maxSessionsPerLine.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1.4 |
voiceProfileLineCallingFeatureMWIEnableEnable or disable call waiting in the endpoint.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1.5 |
voiceProfileLineStatsTableTable of voice profile line statistics objects SEQUENCE OF VoiceProfileLineStatsEntry .1.3.6.1.4.1.5504.2.5.40.1.3.8.7 |
voiceProfileLineStatsEntryLine statistics objects associated with a specific voice profile. VoiceProfileLineStatsEntry .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1 |
voiceProfileLineStatsPacketsSentTotal number of RTP Packets sent for this voice line.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.1 |
voiceProfileLineStatsPacketsReceivedTotal number of RTP Packets received for this voice line.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.2 |
voiceProfileLineStatsBytesSentTotal number of RTP Bytes sent for this voice line.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.3 |
voiceProfileLineStatsBytesReceivedTotal number of RTP Bytes received for this voice line.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.4 |
voiceProfileLineStatsPacketsLostTotal number of RTP Packets lost for this voice line.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.5 |
voiceProfileLineStatsIncomingCallsReceivedTotal incoming calls received.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.6 |
voiceProfileLineStatsIncomingCallsAnsweredTotal incoming calls answered.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.7 |
voiceProfileLineStatsIncomingCallsConnectedTotal incoming calls connected.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.8 |
voiceProfileLineStatsIncomingCallsFailedTotal incoming calls failed.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.9 |
voiceProfileLineStatsOutgoingCallsAttemptedTotal outgoing calls attempted.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.10 |
voiceProfileLineStatsOutgoingCallsAnsweredTotal outgoing calls answered.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.11 |
voiceProfileLineStatsOutgoingCallsConnectedTotal outgoing calls connected.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.12 |
voiceProfileLineStatsOutgoingCallsFailedTotal outgoing calls failed.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.13 |
zhnVoiceConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.40.2 |
zhnVoiceGroups OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.40.2.1 |
zhnVoiceServiceGroupA collection of Zhone Voice objects that describe the voice services of the device. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.1 |
zhnVoiceCapabilitiesGroupA collection of Zhone Voice objects that describe the voice capabilities of the device. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.2 |
zhnVoiceCapabilitiesSIPGroupA collection of Zhone Voice objects that describe the voice SIP or SIP PLAR capabilities of the device. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.3 |
zhnVoiceCapabilitiesMGCPGroupA collection of Zhone Voice objects that describe the voice MGCP capabilities of the device. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.4 |
zhnVoiceCapabilitiesCodecsGroupA collection of Zhone Voice objects that identify the set of supported codecs. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.5 |
zhnVoiceProfileGroupA collection of Zhone Voice objects that describe a voice profile. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.6 |
zhnVoiceProfileServiceProviderGroupA collection of Zhone Voice Profile objects that describe a service provider. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.7 |
zhnVoiceProfileSIPGroupA collection of Zhone Voice Profile objects that describe SIP information. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.8 |
zhnVoiceProfileSIPEventSubscribeGroupA collection of Zhone Voice Profile objects that describe SIP subscriber events information. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.9 |
zhnVoiceProfileMGCPEntryA collection of Zhone Voice Profile objects that describe MGCP information. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.10 |
zhnVoiceProfileRTPEntryA collection of Zhone Voice Profile objects that describe Real-time Transport Protocol (RTP) information. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.11 |
zhnVoiceProfileFaxT38EntryA collection of Zhone Voice Profile objects that describe FAX T.38 information. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.12 |
zhnVoiceProfileLineGroupA collection of Zhone Voice objects that describe physical line information for a voice profile. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.13 |
zhnVoiceProfileLineProcessingGroupA collection of Zhone Voice objects that describe physical line processing information for a voice profile. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.14 |
zhnVoiceProfileLineSIPGroupA collection of Zhone Voice objects that describe voice line information specific to SIP call signaling for a voice profile. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.15 |
zhnVoiceProfileLineMGCPGroupA collection of Zhone Voice objects that describe voice line information specific to MGCP call signaling for a voice profile. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.16 |
zhnVoiceProfileLineCodecsGroupA collection of Zhone Voice objects that describe voice line CODECS information. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.17 |
zhnVoiceLineCallingFeaturesGroupA collection of optionable, configurable Zhone Voice Line calling features. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.18 |
zhnVoiceNotificationGroupCollection of objects for controlling the Zhone Voice notifications. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.19 |
zhnVoiceProfileLineStatsGroupA collection of statistics, per Zhone Voice Line. Unknown .1.3.6.1.4.1.5504.2.5.40.2.1.20 |
zhnVoiceCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.40.2.2 |
zhnVoiceComplianceThe Compliance statement for SNMP entities which manage display the Zhone CPE Voice Information Unknown .1.3.6.1.4.1.5504.2.5.40.2.2.1 |