ZHNPWMIB
This is the Zhone Enterprise MIB module for the Configuration of Zhone Proprietary Pseudo-Wire Interfaces.
Main OID:
zhnPwMib.1.3.6.1.4.1.5504.2.5.31
44
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
44 total| Object Name |
|---|
zhnPwMibThis is the Zhone Enterprise MIB module for the Configuration
of Zhone Proprietary Pseudo-Wire Interfaces. MODULE-IDENTITY .1.3.6.1.4.1.5504.2.5.31 |
IMPORTSThis is the Zhone Enterprise MIB module for the Configuration
of Zhone Proprietary Pseudo-Wire Interfaces. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.2.5.31 |
zhnPwNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.31.0 |
zhnPwObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.31.1 |
zhnPwTableThis table contains the Zhone Proprietary
Pseudo-Wire interface information. SEQUENCE OF ZhnPwEntry .1.3.6.1.4.1.5504.2.5.31.1.1 |
zhnPwEntryA row in this table represents a pseudowire (PW) virtual
connection across a packet network. It is indexed by
pwIndex, which uniquely identifies a singular
connection.
A row is only created when an entry in the PW-STD-MIB pwTable
is created and includes adjunct information to the pwTable. ZhnPwEntry .1.3.6.1.4.1.5504.2.5.31.1.1.1 |
zhnPwIndexA unique index for the conceptual row identifying a PW within
this table. PwIndexType (PW-TC-STD-MIB) .1.3.6.1.4.1.5504.2.5.31.1.1.1.1 |
zhnPwVlanIDThe VLAN ID which this PW is mapped to. If the value is
zero, the VLAN is untagged.rw PwVlanCfg .1.3.6.1.4.1.5504.2.5.31.1.1.1.2 |
zhnPwVlanPriorityThe VLAN priority.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.31.1.1.1.3 |
zhnPwPeerMaskThis object contains the subnet mask for the peer.
This object is required if the Peer Type is IPv4.rw IpAddress .1.3.6.1.4.1.5504.2.5.31.1.1.1.4 |
zhnPwPeerGatewayThis object contains the gateway address for the peer.
This object is required if the Peer Type is IPv4.rw IpAddress .1.3.6.1.4.1.5504.2.5.31.1.1.1.5 |
zhnPwPeerMACThis object contains the MAC address for the peer.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.31.1.1.1.6 |
zhnPwMappedIfNameThe name of the interface mapped to this PW. If the PW is a
structure-agnostic (i.e. SATOP) connection, the interface
name should be that of a T1/E1 port. It the PW is a
structure-aware connection, the interface name should be
that of a DS0 Bundle.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.5504.2.5.31.1.1.1.7 |
zhnPwLocalLMBitsIndicates the value of the Local TDM Failure (L-Bit) and
the Modifier bits (M-bits) currently transmitted.
Refer to RFC 5086 for more information on the L/M bits.ro Enumeration .1.3.6.1.4.1.5504.2.5.31.1.1.1.8 |
zhnPwLocalRBitIndicates the value of the Remote Loss of Frames indication
(R-Bit) currently transmitted.ro Enumeration .1.3.6.1.4.1.5504.2.5.31.1.1.1.9 |
zhnPwRemoteLMBitsIndicates the value of the Local Failure (L-Bit) and
the Modifier bits (M-bits) currently received.
Refer to RFC 5086 for more information on the L/M bits.ro Enumeration .1.3.6.1.4.1.5504.2.5.31.1.1.1.10 |
zhnPwRemoteRBitIndicates the value of the Remote Loss of Frames indication
(R-Bit) currently received.ro Enumeration .1.3.6.1.4.1.5504.2.5.31.1.1.1.11 |
zhnPwPeerMACModeSetting this object to dynamic(1) will cause PW to ARP
for the MAC address of the peer node. If the value of
this object is static(2), the peer MAC address is the
value of object pwPeerMAC.rw Enumeration .1.3.6.1.4.1.5504.2.5.31.1.1.1.12 |
zhnPwActualPayloadSizeThe value of this object indicates the actual PayLoad Size (in bytes).ro Unsigned32 .1.3.6.1.4.1.5504.2.5.31.1.1.1.13 |
zhnPwRxRaiActionIndicates the action to be taken upon when receiving L,M bits equal
to 0,10 (rxRAI). When set to none (1), the payload will be transmitted
as it was received. When set to txAIS (2), the AIS pattern will be transmitted
towards the local CE. When set to txRAI (3), the RAI pattern will be
transmitted towards the local CE. When set to txChlIdle (4), the Channel Idle
signal will be transmitted towards the local CE.rw Enumeration .1.3.6.1.4.1.5504.2.5.31.1.1.1.14 |
zhnPwRxAisActionIndicates the action to be taken upon when receiving L,M bits equal
to 1,00 (rxAIS). When set to none (1), the payload will be transmitted
as it was received. When set to txAIS (2), the AIS pattern will be transmitted
towards the local CE. When set to txRAI (3), the RAI pattern will be
transmitted towards the local CE. When set to txChlIdle (4), the Channel Idle
signal will be transmitted towards the local CE.rw Enumeration .1.3.6.1.4.1.5504.2.5.31.1.1.1.15 |
zhnPwLopActionIndicates the action to be taken while in a Loss or Packets state.
When set to none (1), the payload will be transmitted as it was received.
When set to txAIS (2), the AIS pattern will be transmitted towards the
local CE. When set to txRAI (3), the RAI pattern will be transmitted
towards the local CE. When set to txChlIdle (4), the Channel Idle signal
will be transmitted towards the local CE.rw Enumeration .1.3.6.1.4.1.5504.2.5.31.1.1.1.16 |
zhnPwAdaptStateIndicates the current adaptive state. The only value that can be written
for this object is restart (7), which will restart clock adaption on the port
associated with the bundle.rw Enumeration .1.3.6.1.4.1.5504.2.5.31.1.1.1.17 |
zhnPwAdaptTimeIndicates the current adaptive timestamp.ro INTEGER .1.3.6.1.4.1.5504.2.5.31.1.1.1.18 |
zhnPwIsdnIndicates the endpoint is of IDSN type as defined in ETS 300 233.
When Idsn type is set to disabled (1), the payload is transmitted as
it was received. When set to lt (2), the Line Termination unit is
connected to the Terminal Equipment. When set to nt1 (3), the Network
Termination unit connected to the Exchange Equipment.rw Enumeration .1.3.6.1.4.1.5504.2.5.31.1.1.1.19 |
zhnPwOuterLabelThe value of this object is the MPLS 20-bit outer tag. This
object is only applicable for MPLS PW connections.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.31.1.1.1.20 |
zhnPwClkAcquisitionLevelThe PLL clock acquisition level from 0 - 15. Level 8 or higher is required
for reliable operation. During the clock acquisition process, the Phase Lock
Loop moves through 16 adjustment levels. Level 0 is the starting phase, with
very coarse adjustments. Level 15 is the final phase, with very fine adjustment.
Once level 8 has been reached, the acquired clock is highly accurate.
This object is also referred to as the PWE Adaptive Clock Counter.ro Unsigned32 .1.3.6.1.4.1.5504.2.5.31.1.1.1.21 |
zhnPwClearTotalStatsThis object can be used to clear all PWE total statistics counters, contained
in the pwPerfTotalTable and defined in the PW-STD mib.rw PwClearStatisticsTC .1.3.6.1.4.1.5504.2.5.31.1.1.1.22 |
zhnPwRtpHeaderModeEnable or disable the transmission of a RTP header mode for all
Pseudo-wire connections. Note, the configuration must be saved and
the system rebooted for this item to take effect.rw Enumeration .1.3.6.1.4.1.5504.2.5.31.1.2 |
zhnPwAdaptPllModeConfigure the accuracy of the recovered clock for all Pseudo-wire connections.
Note, configuration must be saved and system rebooted for this item to take
effect. When set to normal(1), the system will support reliable timing recovery
in networks with occasional packet delay variation and packet loss. This is the
recommended mode of operation. When set to fine(2), the accuracy of the recovered
clock will be slightly higher than normal(1) mode, but during the clock recovery
phase the network must be stable and predictable and requires pristine network
conditions during timing acquisition.rw Enumeration .1.3.6.1.4.1.5504.2.5.31.1.3 |
zhnPwAutoAdclEnableEnable or disable the ability to automatically select the first available
Pseudo Wire connection to use for adaptive clock recovery.rw Enumeration .1.3.6.1.4.1.5504.2.5.31.1.4 |
zhnPwAdaptSourceActualThe actual Pseudo Wire connection in use for adaptive clock recovery
if automatic adaptive is disabled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5504.2.5.31.1.5 |
zhnPwSourceIPAddrThis object contains the IP address for all local Pseudo Wire connections.rw IpAddress .1.3.6.1.4.1.5504.2.5.31.1.6 |
zhnPwSourceIPMaskThis object contains the subnet mask for all local Pseudo Wire connections.rw IpAddress .1.3.6.1.4.1.5504.2.5.31.1.7 |
zhnPwSourceGatewayThis object contains the gateway address for all local Pseudo Wire connections.rw IpAddress .1.3.6.1.4.1.5504.2.5.31.1.8 |
zhnPwUdpDstPortThis object contains the UDP port used by the peer.rw Unsigned32 .1.3.6.1.4.1.5504.2.5.31.1.9 |
zhnPwT1E1ModeThis object identifies the DS1 mode of operation for all DS1 ports in
the system.rw Enumeration .1.3.6.1.4.1.5504.2.5.31.1.10 |
zhnPeerPingNameThis object identifies the name of the peer Pseudo Wire connection with
which to initiate a ping test.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.5504.2.5.31.1.11 |
zhnPeerPingRequestThis object starts or stops a Pseudo Wire ping test. A valid zhnPeerPingName
must be configured for the ping test to be successful.rw Enumeration .1.3.6.1.4.1.5504.2.5.31.1.12 |
zhnPeerPingStatusThis object retrieves the status of the current or last Pseudo Wire ping
test initiated by the CPE.rw Enumeration .1.3.6.1.4.1.5504.2.5.31.1.13 |
zhnPwConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.31.2 |
zhnPwMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.31.2 |
zhnPwMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.31.2.1 |
zhnPwMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5504.2.5.31.2.2 |