XYLOGICS-TRAP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for XYLOGICS-TRAP-MIB.
41
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
41 total| Object Name |
|---|
IMPORTSThis trap is sent to the trap host under two
conditions indicated by anxpTrapAttackErrcode :-
1. UserName has exceeded the threshold for
consecutive number of attempts to log-in.
2. UserName has exceeded the threshold for
number of attempts to log-in over a defined
period of time.
The error message is :
WARNING: User account disabled due to suspected
attack.
Note: The time stamp that this trap reports
indicates the amount of time that the process
generating the trap has been running. TRAP-TYPE .1.3.6.1.4.1.15.0.1 |
acpdbmerrorTrapThis trap is sent to the trap host when a database
error occurs. The error message can be one of the
following:
ERPCD cannot read the database
ERPCD cannot write to the database
ERPCD detects wrong database protection.
Note: The time stamp that this trap reports
indicates the amount of time that the process
generating the trap has been running. TRAP-TYPE .1.3.6.1.4.1.15.0.2 |
wanAlarmTrapThis trap is generated when a Red, Yellow or Blue
alarm is detected.
This trap is supported on the following products:
6100, 5391, 5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.4 |
wanAlarmClearTrapThis trap is generated when at least 15 seconds have
elapsed without a Red, Yellow or Blue alarm.
This trap is supported on the following products:
6100, 5391, 5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.5 |
wanBpvThreshTrapThis trap is generated when the number of bipolar
violation errors equals or exceeds the threshold
defined by wanBpvThreshold.
This trap is supported on the following products:
6100, 5391, 5399, 6300, 5393, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.6 |
wanBpvClearTrapThis trap is generated when a 15 minute interval has
terminated without the number of bipolar errors meeting
or exceeding wanBpvThreshold.
This trap is supported on the following products:
6100, 5391, 5399, 6300, 5393, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.7 |
wanOofThreshTrapThis trap is generated when the number of frame
errors equals or exceeds the threshold defined by
wanOofThreshold.
This trap is supported on the following products:
6100, 5391, 5399, 6300, 5393, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.8 |
wanOofClearTrapThis trap is generated when a 15 minute interval has
terminated without the number of frame errors meeting
or exceeding wanOofThreshold.
This trap is supported on the following products:
6100, 5391, 5399, 6300, 5393, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.9 |
wanEsThreshTrapThis trap is generated when the number of errored
seconds errors equals or exceeds the threshold
defined by wanEsThreshold.
This trap is supported on the following products:
6100, 5391, 5399, 6300, 5393, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.10 |
wanEsClearTrapThis trap is generated when a 15 minute interval has
terminated without the number of errored seconds meeting
or exceeding wanEsThreshold.
This trap is supported on the following products:
6100, 5391, 5399, 6300, 5393, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.11 |
callBeginTrapThis trap is generated when an incoming call is detected or
an outbound call is generated by the RAC. The trap is sent to
the trap host defined in the config file. The trap will
include above objects as variable bindings. For further
description of these objects please see appropriate MIBs.
The trap can be enabled or disabled through callBeginTrapObj
MIB object.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.12 |
callEndTrapThis trap is generated when a call has terminated. The trap
is sent to the trap host defined in the config file. The trap
will include above objects as variable bindings. For further
description of these objects please see appropriate MIBs.
This trap is controlled by callEndTrapThresh, MIB object. This
object specifies the number of call that has terminated after
which this trap will be generated by the RAC. Setting the
object, callEndTrapThresh to zero will disable the trap
generation.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.13 |
unexpectDisconnectTrapThis trap is generated when a call has disconnected
unexpectedly. A call is considered to have disconnected
unexpectedly is the call disconnect reason is:
protocolError, localHangup, timeoutHDLC, maxLogonTimeout
OR if the call is handled by a modem and the modem disconnect
reason is : poorSignalQ, failRetrain.
This trap is controlled by unexpectDisconnectTrapThresh
MIB object. TRAP-TYPE .1.3.6.1.4.1.15.0.14 |
forcedCallDisconnectTrapThis trap is generated when a call is disconnected
due to inactivity. The RAC has following activity timers.
Setting off any of these timers will trigger this trap.
The timers are :
cliInactivityTimeout - the amount of time in minutes that
the RAC (system) waits before hanging up the call.
This is valid if the session is in CLI mode. Not
applicable for any other sessions (PPP etc).
The value of the timer is determined by the object,
gpTimerCliInactivity.
inactivityTimeout - the amount of time in minutes that the
RAC waits before hanging up the call. The timer is
independent of the mode of the session. The value of
the timer is determined by the object,
gpTimerInactivityTimer.
netInactivityTimeout - this is similar to the inactivity
timeout.
This trap is controlled by forcedCallDisconnectTrapThresh MIB
object. TRAP-TYPE .1.3.6.1.4.1.15.0.15 |
nodeUnreachableTrapThis trap is generated by Optivity when Optivity
can not ping an Annex. This trap is equivalent to HP
OpenView's OV_Node_Down trap except that it is only generated
for an Annex. This trap will be used only by Bay's Technical
Response Center. TRAP-TYPE .1.3.6.1.4.1.15.0.16 |
wanCvThreshTrapThis trap is generated when the number of CRC6
errors equals or exceeds the threshold
defined wanCvThreshold.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.17 |
wanCvClearTrapThis trap is generated when a 15 minute interval has
terminated without the number of CRC6 errors
meeting or exceeding wanCvThreshold.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.18 |
wanEsfThreshTrapThis trap is generated when the number of ESF
errors equals or exceeds the threshold defined by
wanEsfThreshold.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.19 |
wanEsfClearTrapThis trap is generated when a 15 minute interval has
terminated without the number of ESF errors
meeting or exceeding wanEsfThreshold.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.20 |
wanSesThreshTrapThis trap is generated when the number of severely
errored seconds errors equals or exceeds the threshold
defined by wanSesThreshold.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.21 |
waSesClearTrapThis trap is generated when a 15 minute interval has
terminated without the number of severely errored
seconds meeting or exceeding wanSesThreshold.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.22 |
wanUasThreshTrapThis trap is generated when the number of unavailable
seconds equals or exceeds the threshold defined by
wanUasThreshold.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.23 |
wanUasClearTrapThis trap is generated when a 15 minute interval has
terminated without the number of unavailable seconds
meeting or exceeding wanUasThreshold.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.24 |
wanBesThreshTrapThis trap is generated when the number of bursty
errored seconds equals or exceeds the threshold
defined by wanBesThreshold.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.25 |
wanBesClearTrapThis trap is generated when a 15 minute interval has
terminated without the number of bursty errored
seconds meeting or exceeding wanBesThreshold.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.26 |
wanLofcThreshTrapThis trap is generated when the number of loss of
frame count errors equals or exceeds the threshold
defined by wanLofcThreshold.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.27 |
wanLofcClearTrapThis trap is generated when a 15 minute interval has
terminated without the number of loss of frame count
errors meeting or exceeding wanLofcThreshold.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.28 |
wanCssThreshTrapThis trap is generated when the number of controlled
slip seconds equals or exceeds the threshold defined by
wanCssThreshold.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.29 |
wanCssClearTrapThis trap is generated when a 15 minute interval has
terminated without the number of controlled slip
seconds meeting or exceeding wanCssThreshold.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.30 |
wanFailWanTrapThis trap is generated when a WAN module fails
initialization procedures.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.31 |
wanMdmErrorThreshTrapThis trap is generated when the the number of
consecutive modem errors meets or exceeds
modem_error_threshold.
This trap is supported on the following products:
5399, 5393, 6100, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.32 |
modemUnavailableTrapThis trap is generated when there are no modems
available to handle an incoming call.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.33 |
ds0ErrorThresholdTrapThis trap is generated when the number of
consecutive call failures meets or exceeds
ds0ErrorThreshold.
This trap is supported on the following products:
5399, 5393, 6300, 8000. TRAP-TYPE .1.3.6.1.4.1.15.0.34 |
afderrorTrapThis trap is sent to the trap host(s) when
AFD detects a catastrophic error downloading wan
modules. The wan module at this point is inoperable.
This trap is supported on the following products:
6100, 5391, 6300, 5393, 5399, 8000 TRAP-TYPE .1.3.6.1.4.1.15.0.35 |
dvsConnectFailureThis trap is sent when a DVS connection failure
occurs.
This trap is supported on the following products:
5399, 8000 TRAP-TYPE .1.3.6.1.4.1.15.0.36 |
ss7GwConnectTrapThis trap is sent when the RAS has successfully
connected to an ss7 gateway.
This trap is supported on the following products:
5399, 8000 TRAP-TYPE .1.3.6.1.4.1.15.0.37 |
ss7GwDisconnectTrapThis trap is sent when the RAS loses it's connection
to the ss7 gateway.
This trap is supported on the following products:
5399, 8000 TRAP-TYPE .1.3.6.1.4.1.15.0.38 |
operModemImageVersTrapThis trap includes the operational and the modem image version.
This trap is supported on the following products:
5399, 8000 TRAP-TYPE .1.3.6.1.4.1.15.0.39 |
wanVersionTrapThis trap includes the WAN version string and indicates that a WAN is up.
This trap is supported on the following products:
5399, 8000 TRAP-TYPE .1.3.6.1.4.1.15.0.40 |
nfasBackupStatusTrapThis trap is sent in nfas to indicate the status of
switch-over.
This trap is supported on the following products:
5399, 8000 TRAP-TYPE .1.3.6.1.4.1.15.0.41 |
nfasConnectionStatusTrapThis trap is sent in nfas to indicate the status of
of the connection between any of the Primary,Backup
and Bearer with one another.
This trap is supported on the following products:
5399, 8000 TRAP-TYPE .1.3.6.1.4.1.15.0.42 |