XYLO-PORTS-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
181
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
181 total| Object Name |
|---|
anxpParaPortsThe number of parallel ports on this Annex.rodeprecated INTEGER .1.3.6.1.4.1.15.2.4.1 |
anxpParaPortTableTable of parallel port parameters.deprecated SEQUENCE OF AnxpParaPortEntry .1.3.6.1.4.1.15.2.4.2 |
anxpParaPortEntryThe Annex parallel port configuration
parameters.deprecated AnxpParaPortEntry .1.3.6.1.4.1.15.2.4.2.1 |
anxpParaPortIndexA unique number from 1 to anxpParaPorts that
identifies each parallel port.rodeprecated INTEGER .1.3.6.1.4.1.15.2.4.2.1.1 |
anxpParaPortHardwareTabsThis parameter controls whether the Annex
will send a tab character to the printer. If
disabled, the tab is replaced with spaces.
This MIB object corresponds to the NA/admin
parallel port parameter 'hardware_tabs'.rwdeprecated Enumeration .1.3.6.1.4.1.15.2.4.2.1.2 |
anxpParaPortMapToUpperWhen enabled, the Annex translates all lower
case characters to upper case before
transmitting the characters to the printer
port.
This MIB object corresponds to the NA/admin
parallel port parameter 'map_to_upper'.rwdeprecated Enumeration .1.3.6.1.4.1.15.2.4.2.1.3 |
anxpParaPortPrinterWidthThe defined maximum number of characters per
printer line. The Annex will insert a <newline>
character after the specified number of characters
are output on the parallel port. A value of 0
disables this feature.
This MIB object corresponds to the NA/admin
parallel port parameter 'printer_width'.rwdeprecated INTEGER .1.3.6.1.4.1.15.2.4.2.1.4 |
anxpParaPortInterfaceThe type of printer attached to the port.
This MIB object corresponds to the NA/admin
parallel port parameter 'type'.rwdeprecated Enumeration .1.3.6.1.4.1.15.2.4.2.1.5 |
anxpParaPortSpeedThe printer speed on the Micro-Annex.
If this is an Annex-3 and the printer type is
Centronics, the default is 'normal'. It should
not be necessary to change the value of this
parameter.
This MIB object corresponds to the NA/admin
parallel port parameter 'printer_speed'.rwdeprecated Enumeration .1.3.6.1.4.1.15.2.4.2.1.6 |
anxpParaPortCRLFWhen enabled, the Annex converts a carriage-return
character to carriage-return/line-feed.
This MIB object corresponds to the NA/admin
parallel port parameter 'printer_crlf'.rwdeprecated Enumeration .1.3.6.1.4.1.15.2.4.2.1.7 |
anxpParaPortTcpKeepAliveThe default keep-alive value for connections
to this parallel port. If this is zero, use the
value specified by anxTcpKeepAlive.
This MIB object corresponds to the NA/admin
parallel port parameter 'tcp_keepalive'.rwdeprecated INTEGER .1.3.6.1.4.1.15.2.4.2.1.8 |
totalSyncPortsThe number of synchronous ports on this Annex.rodeprecated INTEGER .1.3.6.1.4.1.15.2.9.1 |
totalSyncInCharsThe total number of characters received on all
synchronous ports.rodeprecated Counter .1.3.6.1.4.1.15.2.9.2 |
totalSyncOutCharsThe total number of characters transmitted on
all synchronous ports.rodeprecated Counter .1.3.6.1.4.1.15.2.9.3 |
totalSyncFrameCheckErrsThe total number of frame check errors detected
on all synchronous ports since the last boot.rodeprecated Counter .1.3.6.1.4.1.15.2.9.4 |
totalSyncXmitUnderrunErrsThe total number of transmit underrun errors
detected on all synchronous ports since the
last boot.rodeprecated Counter .1.3.6.1.4.1.15.2.9.5 |
totalSyncRecvOverrunErrsThe total number of receive overrun errors
detected on all synchronous ports since the
last boot.rodeprecated Counter .1.3.6.1.4.1.15.2.9.6 |
anxSyncTableTable of synchronous port parameters.deprecated SEQUENCE OF AnxSyncEntry .1.3.6.1.4.1.15.2.9.7 |
anxSyncEntryThe synchronous port's parameters.deprecated AnxSyncEntry .1.3.6.1.4.1.15.2.9.7.1 |
anxSyncPortIndexA unique number from 1 to totalSyncPorts that
identifies each synchronous port.rodeprecated INTEGER .1.3.6.1.4.1.15.2.9.7.1.1 |
anxSyncModeThis parameter defines the mode for access to
the synchronous port. The default is unused.
This MIB object corresponds to the NA/admin
synchronous port parameter 'mode'.rwdeprecated Enumeration .1.3.6.1.4.1.15.2.9.7.1.2 |
anxSyncClockingThe clock rate (in Kbps) supplied for this port.
The allowable values are '56', '64', '112', '128' or
'external'. The default value is 'external'.
This MIB object corresponds to the NA/admin
synchronous port parameter 'clocking'.rwdeprecated DisplayString .1.3.6.1.4.1.15.2.9.7.1.3 |
anxSyncLocalUserA string specifying the default user name for
the port. The default value is a zero length
string.
This MIB object corresponds to the NA/admin
synchronous port parameter 'user_name'.rwdeprecated DisplayString .1.3.6.1.4.1.15.2.9.7.1.4 |
anxSyncPortPasswordThe port password. The default value
is '<unset>'.
This MIB object corresponds to the NA/admin
synchronous port parameter 'port_password'.rwdeprecated DisplayString .1.3.6.1.4.1.15.2.9.7.1.5 |
anxSyncLocalAddrThe Internet address for the Annex's side
of the point-to-point link.
This MIB object corresponds to the NA/admin
synchronous port parameter 'local_address'.rwdeprecated IpAddress .1.3.6.1.4.1.15.2.9.7.1.6 |
anxSyncRemoteAddrThe Internet address for the host at the
remote end of the point-to-point link.
This MIB object corresponds to the NA/admin
synchronous port parameter 'remote_address'.rwdeprecated IpAddress .1.3.6.1.4.1.15.2.9.7.1.7 |
anxSyncMetricThis parameter defines the hop count to
the remote end of the synchronous interface.
This MIB object corresponds to the NA/admin
synchronous port parameter 'metric'.rwdeprecated INTEGER .1.3.6.1.4.1.15.2.9.7.1.8 |
anxSyncAllowCompressionWhen enabled, the Annex will use TCP/IP
header compression on this link only
if the other end of the link initiates
the compression.
This MIB object corresponds to the NA/admin
synchronous port parameter 'allow_compression'.rwdeprecated Enumeration .1.3.6.1.4.1.15.2.9.7.1.9 |
anxSyncPppMruThis parameter defines the maximum receive
unit in bytes. The default value is 1500.
This MIB object corresponds to the NA/admin
synchronous port parameter 'ppp_mru'.rwdeprecated INTEGER .1.3.6.1.4.1.15.2.9.7.1.10 |
anxSyncPppSecurityProtoDefines which security protocol will be used
to authenticate the remote user. This
parameter must be set and the Annex
enable_security (anxEnableSecurity) must be
enabled before authentication is performed.
The default is none.
This MIB object corresponds to the NA/admin
synchronous port parameter 'ppp_security_protocol'.rwdeprecated Enumeration .1.3.6.1.4.1.15.2.9.7.1.11 |
anxSyncPppUserRemoteThe username used by the Annex to identify
itself if the remote PPP peer asks for
authentication. Reading this parameter
will return either <set> if the username is
defined or <unset> if the username is not
defined.
This MIB object corresponds to the NA/admin
synchronous port parameter 'ppp_username_remote'.rwdeprecated DisplayString .1.3.6.1.4.1.15.2.9.7.1.12 |
anxSyncPppPasswdRemoteThe username used by the Annex to identify
itself if the remote PPP peer asks for
authentication. Reading this parameter
will return either <set> if the password is
defined or <unset> if the password is not
defined.
This MIB object corresponds to the NA/admin
synchronous port parameter 'ppp_password_remote'.rwdeprecated DisplayString .1.3.6.1.4.1.15.2.9.7.1.13 |
anxSyncPppNcpThe protocol running on the interface.
This MIB object corresponds to the NA/admin
synchronous port parameter 'ppp_ncp'.rwdeprecated Enumeration .1.3.6.1.4.1.15.2.9.7.1.14 |
anxSyncLocationA string specifying location information for
the port. The default value is a zero length
string.
This MIB object corresponds to the NA/admin
synchronous port parameter 'location'.rwdeprecated DisplayString .1.3.6.1.4.1.15.2.9.7.1.15 |
anxSyncForceCTSAllows the control of CTS for the synchronous
port. If disabled, CTS will assume the level
of the interface. If the attached device does
not assert CTS, this parameter must be set to
enabled for proper operation. The default value
is 'disabled'.
This MIB object corresponds to the NA/admin
synchronous port parameter 'force_CTS'.rwdeprecated Enumeration .1.3.6.1.4.1.15.2.9.7.1.16 |
anxSyncSubNetMaskThe subnet mask address for the
local end of the point-to-point link.
This MIB object corresponds to the NA/admin
synchronous port parameter 'subnet_mask'.rwdeprecated IpAddress .1.3.6.1.4.1.15.2.9.7.1.17 |
anxSyncDialupAddrWhen enabled, the Annex requests the
PPP dialup addresses from the host-based
ACP for this synchronous port.
This MIB object corresponds to the NA/admin
synchronous port parameter 'dialup_addresses'.rwdeprecated Enumeration .1.3.6.1.4.1.15.2.9.7.1.18 |
anxSyncPppSecurityThe master security switch for this synchronous
port. When enabled, the value of the
anxSyncPppSecurityProto object determines the
security protocol to use.
This MIB object corresponds to the NA/admin
synchronous port parameter 'ppp_security'.rwdeprecated Enumeration .1.3.6.1.4.1.15.2.9.7.1.19 |
anxmStatsTableTable of phone call statistics and accounting
parameters. This information is cleared each
time the Annex is rebooted. The maximum number
of entries is defined by the current value
of the object anxMaxModemCalls. When the
number of archived calls exceeds the defined
maximum, the oldest terminated call is replaced
by the new call information.deprecated SEQUENCE OF AnxmStatsEntry .1.3.6.1.4.1.15.2.100.1 |
anxmStatsEntryThe modem statistics and accounting parameter
objects.deprecated AnxmStatsEntry .1.3.6.1.4.1.15.2.100.1.1 |
anxmStatsIndexA unique number generated to identify the
particular call.rodeprecated INTEGER .1.3.6.1.4.1.15.2.100.1.1.1 |
anxmStatsPortThe port number on which phone call took place.rodeprecated INTEGER .1.3.6.1.4.1.15.2.100.1.1.2 |
anxmStatsModemTypeThe type of modem which was on the port at the
time of the call.rodeprecated DisplayString .1.3.6.1.4.1.15.2.100.1.1.3 |
anxmStatsTimeThe time when the phone call was initiated.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15.2.100.1.1.4 |
anxmStatsNumberThe number to which this call was made. If
the call was not initiated by the Annex, this
is value is returned as a zero length string.rodeprecated DisplayString .1.3.6.1.4.1.15.2.100.1.1.5 |
anxmStatsDurationDuration of the phone call.rodeprecated TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.15.2.100.1.1.6 |
anxmStatsUsernameName of the user associated with this port at
the time of the call.rodeprecated DisplayString .1.3.6.1.4.1.15.2.100.1.1.7 |
anxmStatsStatusDescribes the status of the call; active,
normal termination, or aborted.rodeprecated Enumeration .1.3.6.1.4.1.15.2.100.1.1.8 |
anxpModemTableA table of modem configuration information
for the ports. SEQUENCE OF AnxpModemEntry .1.3.6.1.4.1.15.2.100.2 |
anxpModemEntryA row in the port's modem configuration table. AnxpModemEntry .1.3.6.1.4.1.15.2.100.2.1 |
anxpModemIndexThe port number for this modem configuration.ro INTEGER .1.3.6.1.4.1.15.2.100.2.1.1 |
anxpModemConfigThe purpose for which this modem is configured.
When set, this object will change a set of parameters
to configure the modem for the specified purpose.
The value 'unknown' is read only, and may be returned
upon read if the modem is not configured to one of
the states listed above. Setting this object to
'unknown' will return an error.
The value 'none(2)' is not valid for hardware types
csmim-t1 and ra6100.
For RA6300, only valid option is dialin(4).rw Enumeration .1.3.6.1.4.1.15.2.100.2.1.2 |
anxpModemResetA control to force the internal modem into a
clean, initial state, through a hardware
reset. In response to a get-request or
get-next-request, the agent always returns
'ready' as the value. Settingthe value to
execute(2) - Busy out modem. If the modem is
busy, then busy it after call is
completed.
For RA6300, this MIB object corresponds to the
NA/admin port parameter 'modem -u <modem number>'.
This is valid only for T1CSMIM and RA6300
boards.rwdeprecated Enumeration .1.3.6.1.4.1.15.2.100.2.1.3 |
anxpModemStatusThis object sets the status of the modem.
Explanation of the values are as follows:
1 - Make modem available if busied out.
2 - Busy out a modem.
3 - Boot-up diagnostic has marked this modem
as failed.
4 - Modem is handling a call.
This MIB object corresponds to the NA/admin
port parameter 'modem -m <modem number>'.
This object valid for RA6300 only.rwdeprecated Enumeration .1.3.6.1.4.1.15.2.100.2.1.4 |
anxpModemBChannelThis object returns the B channel number
that is using the modem. This object is valid only if
the status of the modem is used.
This MIB object displays the similar information
as the NA/admin command 'modem -m <modem number>' and
the modem status is used.
This object valid for RA6300 only.ro INTEGER .1.3.6.1.4.1.15.2.100.2.1.5 |
anxpModemWhenBusyThis object returns when the modem was
busied out. This object is valid only when the modem
status is busied-out(2).
This MIB object displays the similar information
as the NA/admin command 'modem -m <modem number>' and
the modem status is busied out.
This object valid for RA6300 only.rodeprecated INTEGER .1.3.6.1.4.1.15.2.100.2.1.6 |
anxpModemTotalCallsThis object maintains the count of number of times
the line is seized on a modem. The line is seized when a call
arrives on that line.rodeprecated Counter .1.3.6.1.4.1.15.2.100.2.1.7 |
anxpModemRingFailThis object maintains the count of number of times
the modem failed to ring on a call. The counter is maintained
since the last reboot.ro Counter .1.3.6.1.4.1.15.2.100.2.1.8 |
anxpModemOffhookFailThis object maintains the count of number of times
the modem failed to go offhook on a call. The counter is
maintained since the last reboot.ro Counter .1.3.6.1.4.1.15.2.100.2.1.9 |
anxpModemDcdFailThis object maintains the count of number of times
the modem failed to assert DCD on a call. The DCD is asserted
when a call is accepted by the modem. The counter is
maintained since the last reboot.ro Counter .1.3.6.1.4.1.15.2.100.2.1.10 |
anxpModemConsecFailThis object maintains the count of number of times
the modem failed to accept a call consecutively. The counter
gets initialized on every successfull call or when the counter
value reaches threshold and the modem is busyied out.
This object along with the above fail statistics objects could
help in isolating a bad modem.ro Counter .1.3.6.1.4.1.15.2.100.2.1.11 |
anxpModemFirmwareModem firmware version string.
Note: If the object returns a Nosuchname then
it is possible that modem is being upgraded by
AFD or some other tool.rodeprecated DisplayString .1.3.6.1.4.1.15.2.100.2.1.12 |
RFC1213-MIBThe number of serial ports on this Annex.rodeprecated Unknown .1.3.6.1.4.1.559.1.2.2.1 |
totalInCharsThe total number of characters received on all
serial ports.rodeprecated Counter .1.3.6.1.4.1.559.1.2.2.2 |
totalOutCharsThe total number of characters transmitted on
all serial ports.rodeprecated Counter .1.3.6.1.4.1.559.1.2.2.3 |
totalParityErrsThe total number of parity errors detected
on all serial ports.rodeprecated Counter .1.3.6.1.4.1.559.1.2.2.4 |
totalOverrunErrsThe total number of overruns detected on all
serial ports.rodeprecated Counter .1.3.6.1.4.1.559.1.2.2.5 |
totalFramingErrsThe total number of framing errors detected
on all serial ports.rodeprecated Counter .1.3.6.1.4.1.559.1.2.2.6 |
portTableTable of port entries.deprecated SEQUENCE OF PortEntry .1.3.6.1.4.1.559.1.2.2.7 |
portEntryThe port's configuration parameters.deprecated PortEntry .1.3.6.1.4.1.559.1.2.2.7.1 |
anxpPortIndexA unique number from 1 to totalPorts that
identifies each serial port.rodeprecated INTEGER .1.3.6.1.4.1.559.1.2.2.7.1.1 |
anxpModeThis parameter defines the mode for access to
the serial line port. The default is cli.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'mode'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.2 |
anxpCtrlLinesThe type of hardware control used on the port:
none, modem control (dcd/dtr), flow control (cts/rts),
or both.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'control_lines'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.3 |
anxpBidirModemThis parameter controls whether the port is
configured for adaptive use with a bidirectional
modem.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'bidirectional_modem'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.4 |
anxpAllowBcastControls whether the serial port can receive
administrative broadcast messages.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'allow_broadcast'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.5 |
anxpBcastDirectionDefines the direction that an administrative
broadcast message is sent. This parameter is
valid only when the port is defined as a slave
port by the anxpMode parameter.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'broadcast_direction'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.6 |
anxpInputStartCharThe control character sequence that restarts
input if the charPortInFlowType parameter
(in the char MIB) is set to xonXoff.
This value of this object can be either a single
displayable character or two characters of the
form '^x', where '^x' is translated as 'Control-x'.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'input_start_char'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.7 |
anxpInputStopCharThe control character sequence that stops
input if the charPortInFlowType parameter
(in the char MIB) is set to xonXoff.
This value of this object can be either a single
displayable character or two characters of the
form '^x', where '^x' is translated as 'Control-x'.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'input_stop_char'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.8 |
anxpOutputStartCharThe control character sequence that restarts
output if the charPortOutFlowType parameter
(in the char MIB) is set to xonXoff.
This value of this object can be either a single
displayable character or two characters of the
form '^x', where '^x' is translated as 'Control-x'.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'output_start_char'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.9 |
anxpOutputStopCharThe control character sequence that stops
output if the charPortOutFlowType parameter
(in the char MIB) is set to xonXoff.
This value of this object can be either a single
displayable character or two characters of the
form '^x', where '^x' is translated as 'Control-x'.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'output_stop_char'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.10 |
anxpIxanyFlowCtlThis parameter specifies whether any input
character will be treated as a start (xon)
character when output has been suspended by
a stop (xoff) character.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'ixany_flow_control'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.11 |
anxpLongBreakThis parameter controls whether the Annex
returns the user to the CLI prompt after
receiving a break greater than two seconds.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'long_break'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.12 |
anxpShortBreakThis parameter controls whether the Annex
returns the user to the CLI prompt after
receiving a break shorter than two seconds.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'short_break'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.13 |
anxpForwardTimerThis parameter defines the inter-character
timer that sets the amount of time, in tens of
milliseconds, that will elapse before
forwarding the received data. The value of
5 turns off the timer. Setting this object
to 0 causes the default value of 5 to be used.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'forwarding_timer'.rwdeprecated INTEGER .1.3.6.1.4.1.559.1.2.2.7.1.14 |
anxpForwardCountSpecifies the number of received characters
buffered for the port by the Annex before
forwarding the characters to the host or
network.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'forwarding_count'.rwdeprecated INTEGER .1.3.6.1.4.1.559.1.2.2.7.1.15 |
anxpImask7BitsWhen enabled, instructs the Annex to ignore
the eighth bit of all received characters
on the port.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'imask_7bits'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.16 |
anxpAttnCharDefines a control character sequence as an
attention character to return the user to
the CLI prompt. The Annex-II only allows
a single control character (eg. ^A), while
the Annex3 and MicroAnnex allow a string
of control characters to be defined
(eg. ^A^B^Z).
This MIB object corresponds to the NA/admin
asynchronous port parameter 'attn_string'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.17 |
anxpInputBufSizeThe number of 256-byte blocks allocated to
receive input characters from this port.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'input_buffer_size'.rwdeprecated INTEGER .1.3.6.1.4.1.559.1.2.2.7.1.18 |
anxpInputIsActivityControls whether received input characters
are considered as activity for the port.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'input_is_activity'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.19 |
anxpOutputIsActivityControls whether transmitted output characters
are considered as activity for the port.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'output_is_activity'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.20 |
anxpInactivityTimerThe amount of time, in minutes, which a port
can remain inactive before the Annex terminates
all sessions and resets the port. A value of
0 disables the timer.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'inactivity_timer'.rwdeprecated INTEGER .1.3.6.1.4.1.559.1.2.2.7.1.21 |
anxpResetIdleTimerDefines whether input or output resets the
idle timer for the port.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'reset_idle_time_on'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.22 |
anxpCliInactivityThe amount of time, in minutes, that the Annex
waits before hanging up the serial port after
it becomes idle. A value of 0 turns off the
timer. A value of 255 means immediate, which
causes the Annex to hang up the port immediately
after exiting from the last job.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'cli_inactivity'.rwdeprecated INTEGER .1.3.6.1.4.1.559.1.2.2.7.1.23 |
anxpCliSecurityThis parameter controls whether security is
enabled for the port.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'cli_security'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.24 |
anxpConnectSecurityThis parameter controls whether the host-based
security policy is enabled for access from the
port to the network.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'connect_security'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.25 |
anxpPortServerSecurityThis parameter controls whether the host-based
security policy is enabled for access to the
port from the port server.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'port_server_security'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.26 |
anxpPortPasswordThis parameter defines a password for the
port for local password protection.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'port_password'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.27 |
anxpUserNameA string defining the default user name for
the user of this serial port.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'user_name'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.28 |
anxpDedicatedAddrWhen the anxpMode parameter is set to dedicated,
this parameter defines the Internet address
of the host to which this port can connect to.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'dedicated_address'.
See also anxpDedicatedPort below. These objects
are being phased out in favor of the object
anxpDedicatedArgs.rwdeprecated IpAddress .1.3.6.1.4.1.559.1.2.2.7.1.29 |
anxpDedicatedPortThe application name or TCP port number to
which this port can connect when the anxpMode
parameter is set to dedicated. The allowed
application names are 'telnet', 'rlogin',
and 'call'. If a number is specified, the
number must range between 0 and 65535.
Certain numeric values are translated to the
above names as follows:
Set value Get value
0 telnet
23 telnet
513 rlogin
1027 call
This MIB object corresponds to the NA/admin
asynchronous port parameter 'dedicated_port'.
See also anxpDedicatedAddr above. These objects
are being phased out in favor of the object
anxpDedicatedArgs.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.30 |
anxpPromptThis parameter defines a port-specific prompt
string. The prompt string consists of displayable
characters and embedded formatting codes. Each
formatting code is stored in a single character
in nonvolatile memory. The maximum number of
characters stored for the prompt string
is 16. Since the formatting codes consist of
a '%' prepended to a single character, the maximum
length string that may be entered for this object
is 32 characters. Strings less than 32
characters in length will be rejected as bad values
if they cannot be stored into 16 characters in
nonvolatile memory after the formatting codes are
compressed into single characters.
The valid formatting codes are:
%a the string 'annex'
%c the string ': '
%d the date and time
%i the Annex's IP address
%j a newline character
%l port location, or 'port n'
%n the Annex's name
%p the port number
%r the string 'port'
%s a space
%t the time hh:mm:ss
%u the user name for port
%% the string '%'
This MIB object corresponds to the NA/admin
asynchronous port parameter 'prompt'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.31 |
anxpTermVarA string defining the type of terminal attached
to the serial port.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'term_var'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.32 |
anxpNewLineTermThis parameter controls whether a carriage
return is echoed as just a carriage return
(enabled), or whether the carriage return is
echoed as a carriage return and line feed.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'newline_terminal'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.33 |
anxpEchoThis parameter controls whether the Annex
echoes all characters as they are received
from the port.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'echo'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.34 |
anxpMapToLowerWhen enabled, the Annex translates all upper
case characters to lower case as they are
received from the port.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'map_to_lower'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.35 |
anxpMapToUpperWhen enabled, the Annex translates all lower
case characters to upper case as they are
transmitted to the port.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'map_to_upper'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.36 |
anxpHardwareTabsWhen enabled, this parameter allows the Annex
to expand ASCII tab characters.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'hardware_tabs'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.37 |
anxpCharEraseThis parameter controls whether the Annex
echoes the character erase and word erase
characters for a video terminal (enabled)
or for a hard-copy terminal (disabled).
This MIB object corresponds to the NA/admin
asynchronous port parameter 'char_erase'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.38 |
anxpLineEraseThis parameter controls whether the Annex
echoes the line erase character for a video
terminal (enabled) or for a hard-copy terminal
(disabled).
This MIB object corresponds to the NA/admin
asynchronous port parameter 'line_erase'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.39 |
anxpEraseCharDefines the character erase control character
sequence.
This value of this object can be either a single
displayable character or two characters of the
form '^x', where '^x' is translated as 'Control-x'.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'erase_char'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.40 |
anxpEraseWordDefines the word erase control character
sequence.
This value of this object can be either a single
displayable character or two characters of the
form '^x', where '^x' is translated as 'Control-x'.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'erase_word'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.41 |
anxpEraseLineDefines the line erase control character
sequence.
This value of this object can be either a single
displayable character or two characters of the
form '^x', where '^x' is translated as 'Control-x'.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'erase_line'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.42 |
anxpRedisplayLineDefines the reprint line control character
sequence.
This value of this object can be either a single
displayable character or two characters of the
form '^x', where '^x' is translated as 'Control-x'.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'redisplay_line'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.43 |
anxpToggleOutputDefines the flush control character used to
flush the output buffer.
This value of this object can be either a single
displayable character or two characters of the
form '^x', where '^x' is translated as 'Control-x'.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'toggle_output'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.44 |
anxpTelnetEscapeDefines the control character that returns the
user to the 'telnet:' prompt when running the
CLI telnet command.
This value of this object can be either a single
displayable character or two characters of the
form '^x', where '^x' is translated as 'Control-x'.
The value 'U' disables this feature on the
specified port.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'telnet_escape'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.45 |
anxpNeedDsrSpecifies whether the DSR signal needs to be
asserted when connecting to a slave port.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'need_dsr'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.46 |
anxpTelnetCRLFDefines what characters are transmitted
out the port to the network when the
End-of-Line character is sensed. 'enabled'
means transmit Line-Feed and Carriage-Return.
'disabled' means transmit Carriage-Return
and NULL. The default is enabled.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'telnet_crlf'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.47 |
anxpLatbEnableControls interpretation of LAT Data-B packets
received from host.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'latb_enable'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.48 |
anxpSlipSecureIf anxEnableSecurity is not set, this
parameter selects slip session logging. If
anxEnableSecurity is set, this parameter
permits slip access only from secure ports.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'slip_ppp_security'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.49 |
anxpNetLocalAddrThe Internet address for the Annex's side
of the point-to-point (SLIP or PPP) link.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'local_address'.rwdeprecated IpAddress .1.3.6.1.4.1.559.1.2.2.7.1.50 |
anxpNetRemoteAddrThe Internet address for the host at the
remote end of the point-to-point (SLIP or PPP)
link.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'remote_address'.rwdeprecated IpAddress .1.3.6.1.4.1.559.1.2.2.7.1.51 |
anxpSlipSubnetMaskThe subnet mask for this SLIP interface.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'subnet_mask'.rwdeprecated IpAddress .1.3.6.1.4.1.559.1.2.2.7.1.52 |
anxpSlipLoadDumpHostThe Internet address of the host from which
the Annex receives a load or to which the
Annex sends a dump over the SLIP interface.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'slip_load_dump_host'.rwdeprecated IpAddress .1.3.6.1.4.1.559.1.2.2.7.1.53 |
anxpNetMetricThis parameter defines the hop count to
the remote end of the SLIP or PPP interface.
Setting this object to 0 defaults to a
value of 1.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'metric'.rwdeprecated INTEGER .1.3.6.1.4.1.559.1.2.2.7.1.54 |
anxpSlipAllowDumpThis parameter defines whether the Annex is
allowed to dump across a SLIP link.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'slip_allow_dump'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.55 |
anxpDoCompressionWhen enabled, the Annex will attempt to negotiate
TCP/IP header compression on this serial link.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'do_compression'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.56 |
anxpAllowCompressionWhen enabled, the Annex will allow TCP/IP
header compression on this serial link only
if the other end of the serial link initiates
the compression.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'allow_compression'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.57 |
anxpSlipMtuSizeForce the compressed SLIP interface to use
a Maximum Transmission Unit (MTU) of either
1024 bytes (large) or 256 bytes (small). The
default is large.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'slip_mtu_size'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.58 |
anxpSlipNoIcmpWhen enabled, the Annex will discard any
ICMP packets directed to this SLIP link.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'slip_no_icmp'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.59 |
anxpSlipTosWhen enabled, the Annex sends interactive
traffic over this SLIP link before any other
traffic.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'slip_tos'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.60 |
anxpPppMruThis parameter defines the maximum receive
unit in bytes. The default value is 1500.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'ppp_mru'.rwdeprecated INTEGER .1.3.6.1.4.1.559.1.2.2.7.1.61 |
anxpPppAcmThis parameter specifies which of the first
32 bytes (0x00, ... 0x1F) can be sent as
clear text and which need to be escaped. A
bit on in the mask indicates the character
must be escaped. The mask should be specified
as an 8 hex character string (0x1F000000 and
1F000000 are both acceptable).
This MIB object corresponds to the NA/admin
asynchronous port parameter 'ppp_acm'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.62 |
anxpPppSecurityProtoDefines which security protocol will be used
to authenticate the remote user. This
parameter must be set and the Annex
enable_security (anxEnableSecurity) must be
enabled before authentication is performed.
The default is none
This MIB object corresponds to the NA/admin
asynchronous port parameter 'ppp_security_protocol'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.63 |
anxpPppUserRemoteThe username used by the Annex to identify
itself if the remote PPP peer asks for
authentication.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'ppp_username_remote'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.64 |
anxpPppPasswdRemoteThe password used by the Annex to identify
itself if the remote PPP peer asks for
authentication. Reading this parameter
will return either <set> if the password is
defined or <unset> if the password is not
defined.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'ppp_password_remote'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.65 |
anxpLatAuthGroupValThis port parameter specifies which remote
group codes are accessible to a user on a
particular Annex port. Each port has its own
set of group codes. The syntax is a series
of numbers between 0 and 255, separated by
commas and dashes, such as 1,5,100-255.
The keywords 'all' and 'none' are also accepted
and will enable all or disable all groups,
respectively.
If the LAT protocol is not available on the
Annex, sets of this object are ignored.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'authorized_groups'.
Note: You may use either this object or
anxpLatAuthMap object to read or set the
'group_value' parameter.anxpLatAuthMap is
preferred.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.66 |
anxpPppDialupAddrlocal(1) - Disabled.
authserver(2) - The Annex requests the
PPP dialup addresses from the host-based
ACP.
dhcp(3) - The Annex requests the
PPP dialup addresses from the host-based
DHCP.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'address_origin'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.67 |
anxpBannerSpecifies whether the Annex banner and message-
of-the-day are displayed on the port. The
default is enabled.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'banner'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.68 |
anxpPsHistorySpecifies how much data to buffer on a slave
port.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'ps_history_buffer'.rwdeprecated INTEGER .1.3.6.1.4.1.559.1.2.2.7.1.69 |
anxpLocationA descriptive string for a this port. This
string is displayed by the CLI who command.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'location'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.70 |
anxpTypeThe type of device attached to the port. The
default is hardwired.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'type'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.71 |
anxpCliImask7Defines whether input at the CLI is masked to
7 bits. The default is disabled.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'cli_imask7'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.72 |
anxpModemVarA string defining the type of modem attached
to the serial port.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'type_of_modem'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.73 |
anxpPppNcpThe protocol running on the interface.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'ppp_ncp'.
Note that all and ipcp-atcp-ipxcp-ccp-mp are
identical and provided for backward compatibility.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.74 |
anxpPhoneNumberThe phone number used for this port when doing
demand dialing.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'phone_number'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.76 |
anxpNetInactivityThe number of units allowed for serial protocol
inactivity on the port. The type of unit, minutes
or seconds, is defined by the object
anxpNetInactivityUnits. If the type of units is
'seconds', the actual granularity is only 5
seconds. When the interval expires,
the port is automatically reset. A value of 0
disables the timer.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'net_inactivity'.rwdeprecated INTEGER .1.3.6.1.4.1.559.1.2.2.7.1.77 |
anxpAtGuestIf enabled, allows ARAP guest login service.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'at_guest'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.78 |
anxpAtNodeidThe default AppleTalk node ID hint that is
used by the Annex on this port. The address
consists of two parts separated by a dot. The
address may be in either hex or decimal format.
The first part is the network address and ranges from
0 to 65534 (0x0000 to 0xFFFE). The second part
is the node address and ranges from 0 to 254 (0x00
to 0xFE).
Example:
0x00BF.0xFD 191.253 0x00BF.253 191.0xFD
are all the same address.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'at_nodeid'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.79 |
anxpAtSecurityControls whether ACP service is enabled for
this port when establishing an AppleTalk
connection.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'at_security'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.80 |
anxpArapV42bisControls whether V.42bis compression is done
during an ARAP session.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'arap_v42bis'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.81 |
anxpTn3270PrinterHostThe IP address of the machine running a
Berkeley-style lpd server.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'tn3270_printer_name'.rwdeprecated IpAddress .1.3.6.1.4.1.559.1.2.2.7.1.82 |
anxpTn3270PrinterNameA valid printer name contained in the
/etc/printcap file on the remote host.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'tn3270_printer_name'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.83 |
anxpTcpKeepAliveThe default keep-alive value for connections
to this serial port. If this is zero, use the
value specified by anxTcpKeepAlive.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'tcp_keepalive'.rwdeprecated INTEGER .1.3.6.1.4.1.559.1.2.2.7.1.84 |
anxpDtrSignalControls the DTR (Data Terminal Ready) output
control signal for this serial port. Valid set
values are high or low. Setting the value on an
idle port will produce an error.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.86 |
anxpRtsSignalControls the RTS (Request to Send) output control
signal for this serial port. Valid set values are
high or low. Setting the value on an idle port will
produce an error.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.87 |
anxpCliInterfaceSpecifies either a Unix or VMS command line interface.
The default is uci.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'cli_interface'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.88 |
anxpAutobaudWhen enabled, specifies that the line speed should be
determined when opening the connection. The default
is disabled.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'autobaud'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.89 |
anxpDefSessModeThe default session mode when the DECServer command
interface is configured. The default is interactive.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'default_session_mode'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.90 |
anxpIpxSecurityControls whether IPX security is enabled on
this port. The default is disabled.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'ipx_security'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.91 |
anxpIpsoClassDefines the IP security classification for
packets sent and received on this port. The
default value is none.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'ipso_class'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.92 |
anxpVciLoginPortPasswdEnables the port password if the port is
configured as a DECServer interface port.
The default is disabled.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'login_port_password'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.93 |
anxpVciLoginTimeoutEnables a login timer if the port is configured
as a DECServer interface port. The default
is disabled.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'login_port_timeout'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.94 |
anxpDedicatedArgsCommand line arguments to be passed to process
started by a dedicated port with mode set to
'telnet', 'tn3270', 'rlogin', 'connect' (if LAT
is in use) or 'call'.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'dedicated_arguments'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.95 |
anxpNetInactivityUnitsThe type of units that are used for the
port's net inactivity timer. See also the
anxpNetInactivity object. The default value
is 'minutes'.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'net_inactivity_units'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.96 |
anxpResolveProtocolDefault host protocol to use when starting a
dedicated port and the protocol is not explicitly
specified in the command. Is set to one of
'telnet', connect, or any. Any means to try LAT
(connect) first and if that fails, try telnet.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'resolve_protocol.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.97 |
anxpForwardKeyDefines a control character sequence as an
attention character to switch the user to
the next session. The Annex-II only allows
a single control character (eg. ^A), while
the Annex3 and MicroAnnex allow a string
of control characters to be defined
(eg. ^A^B^Z).
This MIB object corresponds to the NA/admin
asynchronous port parameter 'forward_key'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.98 |
anxpBackwardKeyDefines a control character sequence as an
attention character to switch the user to
the previous session. The Annex-II only allows
a single control character (eg. ^A), while
the Annex3 and MicroAnnex allow a string
of control characters to be defined
(eg. ^A^B^Z).
This MIB object corresponds to the NA/admin
asynchronous port parameter 'Backward_key'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.99 |
anxpPppIpxNetworkThe IPX network number for an IPX PPP connection
using this port. When the IPX PPP connection is
established the network number will be negotiated.
If one end of the connection is set to zero then
the value from the other end of the connection will
be used.
The value of this object is an 8 digit hexadecimal
number string representing the IPX network segment
assigned to this port. The value must be unique
across the network domain.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'ppp_ipx_network'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.100 |
anxpPppIpxNodeThe IPX node number for an IPX PPP connection
using this port.
The value of this object is a 12 digit
hexadecimal number string representing the IPX
node number assigned to this port.
Note the string is expected in the form:
12-3a-4-7-89-23.Each part of the address
must be a hex value separated by a hyphen.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'ppp_ipx_node'.rwdeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.7.1.101 |
anxpLatAuthMapThis port parameter is functionally identical to
anxpLatAuthGroupVal and corresponds to the
NA/admin Annex parameter 'group_value'.
The syntax of this object is an octet string
32 bytes long, with the first byte
representing groups 0 through 7 and the last
byte representing groups 248 through 255.
For example, 0x40 0x25 ... means the groups
1,10,13,15 are valid for this port.
A returned value with all bits set to zero is the
same as setting 'group_value' to 'none'.
The object always returns a string 32 bytes long.
Note: You may use either this object or
anxpLatAuthVal object to read or set the
'group_value' parameter.anxpLatAuthMap is
preferred.rwdeprecated OCTET STRING .1.3.6.1.4.1.559.1.2.2.7.1.102 |
anxpMultiSessionThis parameter allows multisession operation to
be managed on a per port basis. This MIB object
corresponds to the NA/admin port parameter
'multisessions'. To enable the multisession
capability on a port, it is also necessary to enable
the service at the Annex level by setting the object
anxMultiSession to the enable value. Only when the
service is enabled at the Annex and at the port level
will it take effect.
Note: The value of this object is written in the
non-volatile memory. Thus the value takes in effect
after reboot or resetting the port.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.103 |
anxpAutoTimeoutThis parameter allows a user to specify the
maximum amount of time the annex should wait
before dropping into cli mode. This parameter
will specify the amount of time in seconds that
the annex will wait for a auto-detect or
auto-adapt port client's to identify itself as a
PPP or CLI client before defaulting the user into
CLI mode.
The default is 30 seconds.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'autodetect-timeout'.rwdeprecated INTEGER .1.3.6.1.4.1.559.1.2.2.7.1.104 |
anxpAutoPPPSecurityThis parameter should be used together with the
ppp_security_protocol parameter. If this object is
set to enable and if the user comes in as CLI and
then goes into PPP mode, the annex behaves as if
the ppp_security_protocol parameter was set to
'none'. If the user is auto-detected as PPP, the
annex will use ppp_security_protocol as specified.
Finally, settting this object to disable, will not
affect the annex operation.
The default is disable(2).
This MIB object corresponds to the NA/admin
asynchronous port parameter 'ppp_sec_auto'.rwdeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.7.1.105 |
portStatsTableTable of current port status entries.deprecated SEQUENCE OF PortStatsEntry .1.3.6.1.4.1.559.1.2.2.8 |
portStatsEntryThe port's current status parameters.
If the port is not in use, no values are
returned for that port.deprecated PortStatsEntry .1.3.6.1.4.1.559.1.2.2.8.1 |
anxpPortStatsIndexA unique number from 1 to the sum of the
number of asynchronous ports, synchronous ports,
and virtual ports. The numbers from 1 to
totalPorts represent the asynchronous ports,
from totalPorts+1 to totalPorts+totalSyncPorts
represent the synchronous ports, and from
totalPorts+totalSyncPorts to
totalPorts+totalSyncPorts+128 represent the
virtual ports.rodeprecated INTEGER .1.3.6.1.4.1.559.1.2.2.8.1.1 |
anxpCurrentUserNameThe name of the current user on this port. The
string '<unknown>' is returned if the port is in
use but the current user name cannot be determined.rodeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.8.1.2 |
anxpPortIdleTimeThe length of time in DD:HH:MM since the
last activity on this port.rodeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.8.1.3 |
anxpPortLoginTimeDisplays the time that the port was opened from the
Annex time-of-the-day clock.rodeprecated DisplayString .1.3.6.1.4.1.559.1.2.2.8.1.4 |
anxpPortProtoThis object returns the information that is similar
to when the command 'who' is typed on the CLI.
CLI - The port is a CLI port and was opened by
a device connected to the port or by a
connection from a host as a virtual CLI.
PSVR - The port is a slave port and was opened
via a network connection to the port
server.
VCLI - The port is a virtual port.
DP - The port is dedicated.
LPD- The port is the Annex line printer daemon.
PPP - The port is a PPP interface.
SLIP - The port is a SLIP interface.
ARAP - The port is a ARAP interface.
FTP - The port is a FTP interface.
IPX - The port is an IPX interface.
DYNDIAL - The port is a dynamic dial port.
Note: Values 3 and 4 are unused.rodeprecated Enumeration .1.3.6.1.4.1.559.1.2.2.8.1.5 |
anxpPortJobsPort Job list for this cli port.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.559.1.2.2.8.1.6 |